summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/mellanox/mlxsw
AgeCommit message (Collapse)AuthorFilesLines
2018-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-25/+27
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
2018-06-15mlxsw: spectrum_switchdev: Fix port_vlan refcountingPetr Machata1-1/+3
Switchdev notifications for addition of SWITCHDEV_OBJ_ID_PORT_VLAN are distributed not only on clean addition, but also when flags on an existing VLAN are changed. mlxsw_sp_bridge_port_vlan_add() calls mlxsw_sp_port_vlan_get() to get at the port_vlan in question, which implicitly references the object. This then leads to discrepancies in reference counting when the VLAN is removed. spectrum.c warns about the problem when the module is removed: [13578.493090] WARNING: CPU: 0 PID: 2454 at drivers/net/ethernet/mellanox/mlxsw/spectrum.c:2973 mlxsw_sp_port_remove+0xfd/0x110 [mlxsw_spectrum] [...] [13578.627106] Call Trace: [13578.629617] mlxsw_sp_fini+0x2a/0xe0 [mlxsw_spectrum] [13578.634748] mlxsw_core_bus_device_unregister+0x3e/0x130 [mlxsw_core] [13578.641290] mlxsw_pci_remove+0x13/0x40 [mlxsw_pci] [13578.646238] pci_device_remove+0x31/0xb0 [13578.650244] device_release_driver_internal+0x14f/0x220 [13578.655562] driver_detach+0x32/0x70 [13578.659183] bus_remove_driver+0x47/0xa0 [13578.663134] pci_unregister_driver+0x1e/0x80 [13578.667486] mlxsw_sp_module_exit+0xc/0x3fa [mlxsw_spectrum] [13578.673207] __x64_sys_delete_module+0x13b/0x1e0 [13578.677888] ? exit_to_usermode_loop+0x78/0x80 [13578.682374] do_syscall_64+0x39/0xe0 [13578.685976] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fix by putting the port_vlan when mlxsw_sp_port_vlan_bridge_join() determines it's a flag-only change. Fixes: b3529af6bb0d ("spectrum: Reference count VLAN entries") Signed-off-by: Petr Machata <petrm@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-15mlxsw: spectrum_router: Align with new route replace logicIdo Schimmel1-16/+5
Commit f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route") changed the IPv6 route replace logic so that the first matching route (i.e., same metric) is replaced. Have mlxsw replace the first matching route as well. Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-15mlxsw: spectrum_router: Allow appending to dev-only routesIdo Schimmel1-8/+19
Commit f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route") changed the IPv6 route append logic so that dev-only routes can be appended and not only gatewayed routes. Align mlxsw with the new behaviour. Fixes: f34436a43092 ("net/ipv6: Simplify route replace and appending into multipath route") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-1/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-05mlxsw: Add extack messages for port_{un, }split failuresDavid Ahern3-9/+25
Return messages in extack for port split/unsplit errors. e.g., $ devlink port split swp1s1 count 4 Error: mlxsw_spectrum: Port cannot be split further. devlink answers: Invalid argument $ devlink port unsplit swp4 Error: mlxsw_spectrum: Port was not split. devlink answers: Invalid argument Signed-off-by: David Ahern <dsahern@gmail.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-05devlink: Add extack to reload and port_{un, }split operationsDavid Ahern1-3/+6
Add extack argument to reload, port_split and port_unsplit operations. Signed-off-by: David Ahern <dsahern@gmail.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04mlxsw: spectrum_span: Suppress VLAN on BRIDGE_VLAN_INFO_UNTAGGEDPetr Machata1-1/+3
When offloading mirroring to gretap or ip6gretap netdevices, an 802.1q bridge is one of the soft devices permissible in the underlay when resolving the packet path. After the packet path is resolved to a particular bridge egress device, flags on packet VLAN determine whether the egressed packet should be tagged. The current logic however only ever sets the VLAN tag, never suppresses it. Thus if there's a VLAN netdevice above the bridge that determines the packet VLAN, that VLAN is never unset, and mirroring is configured with VLAN tagging. Fix by setting the packet VLAN on both branches: set to zero (for unset) when BRIDGE_VLAN_INFO_UNTAGGED, copy the resolved VLAN (e.g. from bridge PVID) otherwise. Fixes: 946a11e7408e ("mlxsw: spectrum_span: Allow bridge for gretap mirror") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04mlxsw: spectrum_switchdev: Postpone respin on object deletionPetr Machata1-1/+1
VLAN deletion notifications are emitted before the relevant change is projected to bridge configuration. Thus, like with VLAN addition, schedule SPAN respin for later. Fixes: c520bc698647 ("mlxsw: Respin SPAN on switchdev events") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-03Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-0/+5
Filling in the padding slot in the bpf structure as a bug fix in 'ne' overlapped with actually using that padding area for something in 'net-next'. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31mlxsw: spectrum_switchdev: Schedule respin during trans preparePetr Machata1-1/+1
Since there's no special support for the bridge events, the driver returns -EOPNOTSUPP, and thus the commit never happens. Therefore schedule respin during the prepare stage: there's no real difference one way or another. This fixes the problem that mirror-to-gretap offload wouldn't adapt to changes in bridge vlan configuration right away and another notification would have to arrive for mlxsw to catch up. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-31mlxsw: spectrum_switchdev: Ignore bridge VLAN eventsPetr Machata1-0/+6
A follow-up patch enables emitting VLAN notifications for the bridge CPU port in addition to the existing slave port notifications. These notifications have orig_dev set to the bridge in question. Because there's no specific support for these VLANs, just ignore the notifications to maintain the current behavior. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29mlxsw: pci: Utilize MRSR register to perform FW resetJiri Pirko3-74/+62
So far, the PCI BAR0 register is used for triggering FW reset. However, that is a legacy attitude and it is recommended to use MRSR to perform reset instead. So do that. Move the reset into init() function as the cmd interface needs to be used. With that, IRQ initialization needs to be moved as well. As a side effect, the reset move simplifies the devlink reload flow. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29mlxsw: cmd: Handle error after reset gracefullyJiri Pirko2-12/+30
There is an exception in command interface processing in case the MRSR register is written to. The register triggers FW reset and during the reset FW returns an error. So handle this by ignoring this error while writing to MRSR register. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29mlxsw: reg: Add Management Reset and Shutdown RegisterJiri Pirko1-0/+25
Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-29mlxsw: spectrum: Forbid creation of VLAN 1 over port/LAGPetr Machata1-0/+5
VLAN 1 is internally used for untagged traffic. Prevent creation of explicit netdevice for that VLAN, because that currently isn't supported and leads to the NULL pointer dereference cited below. Fix by preventing creation of VLAN devices with VID of 1 over mlxsw devices or LAG devices that involve mlxsw devices. [ 327.175816] ================================================================================ [ 327.184544] UBSAN: Undefined behaviour in drivers/net/ethernet/mellanox/mlxsw/spectrum_fid.c:200:12 [ 327.193667] member access within null pointer of type 'const struct mlxsw_sp_fid' [ 327.201226] CPU: 0 PID: 8983 Comm: ip Not tainted 4.17.0-rc4-petrm_net_ip6gre_headroom-custom-140 #11 [ 327.210496] Hardware name: Mellanox Technologies Ltd. "MSN2410-CB2F"/"SA000874", BIOS 4.6.5 03/08/2016 [ 327.219872] Call Trace: [ 327.222384] dump_stack+0xc3/0x12b [ 327.234007] ubsan_epilogue+0x9/0x49 [ 327.237638] ubsan_type_mismatch_common+0x1f9/0x2d0 [ 327.255769] __ubsan_handle_type_mismatch+0x90/0xa7 [ 327.264716] mlxsw_sp_fid_type+0x35/0x50 [mlxsw_spectrum] [ 327.270255] mlxsw_sp_port_vlan_router_leave+0x46/0xc0 [mlxsw_spectrum] [ 327.277019] mlxsw_sp_inetaddr_port_vlan_event+0xe1/0x340 [mlxsw_spectrum] [ 327.315031] mlxsw_sp_netdevice_vrf_event+0xa8/0x100 [mlxsw_spectrum] [ 327.321626] mlxsw_sp_netdevice_event+0x276/0x430 [mlxsw_spectrum] [ 327.367863] notifier_call_chain+0x4c/0x150 [ 327.372128] __netdev_upper_dev_link+0x1b3/0x260 [ 327.399450] vrf_add_slave+0xce/0x170 [vrf] [ 327.403703] do_setlink+0x658/0x1d70 [ 327.508998] rtnl_newlink+0x908/0xf20 [ 327.559128] rtnetlink_rcv_msg+0x50c/0x720 [ 327.571720] netlink_rcv_skb+0x16a/0x1f0 [ 327.583450] netlink_unicast+0x2ca/0x3e0 [ 327.599305] netlink_sendmsg+0x3e2/0x7f0 [ 327.616655] sock_sendmsg+0x76/0xc0 [ 327.620207] ___sys_sendmsg+0x494/0x5d0 [ 327.666117] __sys_sendmsg+0xc2/0x130 [ 327.690953] do_syscall_64+0x66/0x370 [ 327.694677] entry_SYSCALL_64_after_hwframe+0x49/0xbe [ 327.699782] RIP: 0033:0x7f4c2f3f8037 [ 327.703393] RSP: 002b:00007ffe8c389708 EFLAGS: 00000246 ORIG_RAX: 000000000000002e [ 327.711035] RAX: ffffffffffffffda RBX: 000000005b03f53e RCX: 00007f4c2f3f8037 [ 327.718229] RDX: 0000000000000000 RSI: 00007ffe8c389760 RDI: 0000000000000003 [ 327.725431] RBP: 00007ffe8c389760 R08: 0000000000000000 R09: 00007f4c2f443630 [ 327.732632] R10: 00000000000005eb R11: 0000000000000246 R12: 0000000000000000 [ 327.739833] R13: 00000000006774e0 R14: 00007ffe8c3897e8 R15: 0000000000000000 [ 327.747096] ================================================================================ Fixes: 9589a7b5d7d9 ("mlxsw: spectrum: Handle VLAN devices linking / unlinking") Suggested-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-22mlxsw: spectrum_router: Add support for route appendDavid Ahern1-0/+2
Handle append for gateway based routes. Dev-only multipath routes will be handled by a follow on patch. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19mlxsw: use devlink helper to generate physical port nameJiri Pirko4-20/+19
Since devlink knows the info needed to generate the physical port name in a generic way for all devlink users, use the helper to do the job. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19devlink: extend attrs_set for setting port flavoursJiri Pirko1-2/+2
Devlink ports can have specific flavour according to the purpose of use. This patch extend attrs_set so the driver can say which flavour port has. Initial flavours are: physical, cpu, dsa User can query this to see right away what is the purpose of each port. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-19devlink: introduce devlink_port_attrs_setJiri Pirko4-7/+9
Change existing setter for split port information into more generic attrs setter. Alongside with that, allow to set port number and subport number for split ports. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-14mlxsw: spectrum_span: Support LAG under mirror-to-gretapPetr Machata1-0/+21
When resolving a path that the packet will take after being encapsulated in mirror-to-gretap scenarios, one of the devices en route could be a LAG. In that case, mirror to first up slave that corresponds to a front panel port. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-12Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-2/+2
The bpf syscall and selftests conflicts were trivial overlapping changes. The r8169 change involved moving the added mdelay from 'net' into a different function. A TLS close bug fix overlapped with the splitting of the TLS state into separate TX and RX parts. I just expanded the tests in the bug fix from "ctx->conf == X" into "ctx->tx_conf == X && ctx->rx_conf == X". Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: spectrum_span: Use a more fitting error codePetr Machata1-1/+1
ENOENT is suitable when an item is looked for in a collection and can't be found. The failure here is actually a depletion of a resource, where ENOBUFS is the more fitting error code. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: spectrum_span: Rename misnamed variable l3edevPetr Machata1-16/+16
Calling the variable l3edev was relevant when neighbor lookup was the last stage in the simulated pipeline. Now that mlxsw handles bridges and vlan devices as well, calling it "L3" is a misnomer. Thus in mlxsw_sp_span_dmac(), rename to "dev", because that function is just a service routine where the distinction between tunnel and egress device isn't necessary. In mlxsw_sp_span_entry_tunnel_parms_common(), rename to "edev" to emphasize that the routine traces packet egress. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: core: Fix an error handling path in 'mlxsw_core_bus_device_register()'Christophe JAILLET1-2/+2
Resources are not freed in the reverse order of the allocation. Labels are also mixed-up. Fix it and reorder code and labels in the error handling path of 'mlxsw_core_bus_device_register()' Fixes: ef3116e5403e ("mlxsw: spectrum: Register KVD resources with devlink") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: spectrum_span: Support VLAN under mirror-to-gretapPetr Machata1-8/+19
When mirroring to a gretap or ip6gretap device, allow the underlay packet path to include VLAN devices. The following configurations are supported in underlay: - vlan over phys - vlan-unaware bridge where the egress device is vlan over phys - vlan over vlan-aware bridge where the egress device is phys Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: spectrum_span: Support mirror-to-VLANPetr Machata1-0/+64
Offload "tc action mirred mirror" to a device that is a vlan device on top of a front-panel port device. The hardware encapsulates the mirrored packets in a VLAN tag. That includes the case that the mirrored traffic is already VLAN-tagged--in that case the monitor traffic will be double-tagged, just like in the software path. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11mlxsw: reg: Add MLXSW_REG_MPAT_SPAN_TYPE_REMOTE_ETHPetr Machata1-0/+6
Add MLXSW_REG_MPAT_SPAN_TYPE_REMOTE_ETH to support VLAN-encapsulated port mirroring. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-7/+5
Overlapping changes in selftests Makefile. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03switchdev: Add fdb.added_by_user to switchdev notificationsPetr Machata1-0/+4
The following patch enables sending notifications also for events on FDB entries that weren't added by the user. Give the drivers the information necessary to distinguish between the two origins of FDB entries. To maintain the current behavior, have switchdev-implementing drivers bail out on notifications about non-user-added FDB entries. In case of mlxsw driver, allow a call to mlxsw_sp_span_respin() so that SPAN over bridge catches up with the changed FDB. Signed-off-by: Petr Machata <petrm@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by: Ivan Vecera <ivecera@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03mlxsw: pci: Check number of CQEs for CQE version 2Jiri Pirko2-1/+10
Check number of CQEs for CQE version 2 reported by QUERY_AQ_CAP command. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03mlxsw: pci: Allow to use CQEs of version 1 and version 2Jiri Pirko2-11/+91
Use previously added resources to query FW support for multiple versions of CQEs. Use the biggest version supported. For SDQs, it has no sense to use version 2 as it does not introduce any new features, but it is twice the size of CQE version 1. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03mlxsw: pci: Introduce helpers to work with multiple CQE versionsJiri Pirko2-42/+104
Introduce definitions of fields in CQE version 1 and 2. Also, introduce common helpers that would call appropriate version-specific helpers according to the version enum passed. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-03mlxsw: resources: Add CQE versions resourcesJiri Pirko1-0/+6
Add resources that FW uses to report supported CQE versions. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02mlxsw: spectrum_router: Return an error for routes added after abortIdo Schimmel1-0/+7
We currently do not perform accounting in the driver and thus can't reject routes before resources are exceeded. However, in order to make users aware of the fact that routes are no longer offloaded we can return an error for routes configured after the abort mechanism was triggered. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02mlxsw: spectrum_router: Return an error for non-default FIB rulesIdo Schimmel1-7/+7
Since commit 9776d32537d2 ("net: Move call_fib_rule_notifiers up in fib_nl_newrule") it is possible to forbid the installation of unsupported FIB rules. Have mlxsw return an error for non-default FIB rules in addition to the existing extack message. Example: # ip rule add from 198.51.100.1 table 10 Error: mlxsw_spectrum: FIB rules not supported. Note that offload is only aborted when non-default FIB rules are already installed and merely replayed during module initialization. Signed-off-by: Ido Schimmel <idosch@mellanox.com> Acked-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30mlxsw: spectrum_span: Allow bridge for gretap mirrorPetr Machata2-6/+90
When handling mirroring to a gretap or ip6gretap netdevice in mlxsw, the underlay address (i.e. the remote address of the tunnel) may be routed to a bridge. In that case, look up the resolved neighbor Ethernet address in that bridge's FDB. Then configure the offload to direct the mirrored traffic to that port, possibly with tagging. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reviewed-by: Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30mlxsw: Respin SPAN on switchdev eventsPetr Machata1-4/+59
Changes to switchdev artifact can make a SPAN entry offloadable or unoffloadable. To that end: - Listen to SWITCHDEV_FDB_*_TO_BRIDGE notifications in addition to the *_TO_DEVICE ones, to catch whatever activity is sent to the bridge (likely by mlxsw itself). On each FDB notification, respin SPAN to reconcile it with the FDB changes. - Also respin on switchdev port attribute changes (which currently covers changes to STP state of ports) and port object additions and removals. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30mlxsw: spectrum: Register SPAN before switchdevPetr Machata1-12/+12
Since switchdev events can trigger SPAN respin, it is necessary that the data structures are available. Register SPAN first, with a commentary on what the dependencies are. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30mlxsw: spectrum_switchdev: Publish two functionsPetr Machata2-1/+51
Publish the existing function mlxsw_sp_bridge_port_find(), and add another service accessor mlxsw_sp_bridge_port_stp_state(). Publish both in a new file spectrum_switchdev.h. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30mlxsw: spectrum: Extract mlxsw_sp_stp_spms_state()Petr Machata2-13/+14
Instead of duplicating the decision regarding port forwarding state made by mlxsw_sp_port_vid_stp_set(), extract the decision-making into a new function and reuse. Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27mlxsw: spectrum_switchdev: Do not remove mrouter port from MDB's ports listIdo Schimmel1-7/+5
When IGMP snooping is enabled on a bridge, traffic forwarded by an MDB entry should be sent to both ports member in the MDB's ports list and mrouter ports. In case a port needs to be removed from an MDB's ports list, but this port is also configured as an mrouter port, then do not update the device so that it will continue to forward traffic through that port. Fix a copy-paste error that checked that IGMP snooping is enabled twice instead of checking the port's mrouter state. Fixes: ded711c87a04 ("mlxsw: spectrum_switchdev: Consider mrouter status for mdb changes") Signed-off-by: Ido Schimmel <idosch@mellanox.com> Reported-by: Colin King <colin.king@canonical.com> Reviewed-by: Nogah Frankel <nogahf@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19net/ipv6: Rename fib6_info struct elementsDavid Ahern1-28/+28
Change the prefix for fib6_info struct elements from rt6i_ to fib6_. rt6i_pcpu and rt6i_exception_bucket are left as is given that they point to rt6_info entries. Rename only; not functional change intended. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Flip FIB entries to fib6_infoDavid Ahern1-32/+32
Convert all code paths referencing a FIB entry from rt6_info to fib6_info. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-18net/ipv6: Move nexthop data to fib6_nhDavid Ahern1-16/+16
Introduce fib6_nh structure and move nexthop related data from rt6_info and rt6_info.dst to fib6_nh. References to dev, gateway or lwtstate from a FIB lookup perspective are converted to use fib6_nh; datapath references to dst version are left as is. Signed-off-by: David Ahern <dsahern@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-08devlink: convert occ_get op to separate registrationJiri Pirko3-49/+43
This resolves race during initialization where the resources with ops are registered before driver and the structures used by occ_get op is initialized. So keep occ_get callbacks registered only when all structs are initialized. The example flows, as it is in mlxsw: 1) driver load/asic probe: mlxsw_core -> mlxsw_sp_resources_register -> mlxsw_sp_kvdl_resources_register -> devlink_resource_register IDX mlxsw_spectrum -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) 2) reload triggered by devlink command: -> mlxsw_devlink_core_bus_device_reload -> mlxsw_sp_fini -> mlxsw_sp_kvdl_fini -> devlink_resource_occ_get_unregister IDX (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get which is using mlxsw_sp would cause use-after free) -> mlxsw_sp_init -> mlxsw_sp_kvdl_init -> mlxsw_sp_kvdl_parts_init -> mlxsw_sp_kvdl_part_init -> devlink_resource_size_get IDX (to get the current setup size from devlink) -> devlink_resource_occ_get_register IDX (register current occupancy getter) Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction") Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-27/+51
Minor conflicts in drivers/net/ethernet/mellanox/mlx5/core/en_rep.c, we had some overlapping changes: 1) In 'net' MLX5E_PARAMS_LOG_{SQ,RQ}_SIZE --> MLX5E_REP_PARAMS_LOG_{SQ,RQ}_SIZE 2) In 'net-next' params->log_rq_size is renamed to be params->log_rq_mtu_frames. 3) In 'net-next' params->hard_mtu is added. Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01mlxsw: spectrum: Don't use resource ID of 0Petr Machata1-1/+1
In commit 145307460ba9 ("devlink: Remove top_hierarchy arg to devlink_resource_register"), the "top_hierarchy" parameter to devlink_resource_register() was removed in favor of using the parameter "parent_resource_id" exclusively to determine who the parent is. The root node's resource ID for this purpose is DEVLINK_RESOURCE_ID_PARENT_TOP with the value 0. It is therefore problematic that the resource MLXSW_SP_RESOURCE_KVD has also ID of 0. Fix this by numbering driver-specific resources from 1. Fixes: 145307460ba9 ("devlink: Remove top_hierarchy arg to devlink_resource_register") Signed-off-by: Petr Machata <petrm@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01mlxsw: spectrum: Pass mlxsw_core as arg of mlxsw_sp_kvdl_resources_register()Jiri Pirko3-4/+4
Pass struct mlxsw_core instead of devlink since it is nicer within mlxsw code and we need both structs in mlxsw_sp_kvdl_resources_register() anyway. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01mlxsw: Move "resources_query_enable" out of mlxsw_config_profileJiri Pirko6-12/+8
As struct mlxsw_config_profile is mapped to the payload of the FW command of the same name, resources_query_enable flag does not belong there. Move it to struct mlxsw_driver. Signed-off-by: Jiri Pirko <jiri@mellanox.com> Signed-off-by: Ido Schimmel <idosch@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-04 07:05:55 +0300