summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/intel
AgeCommit message (Collapse)AuthorFilesLines
2015-02-24i40e/i40evf: i40e_register.h updatesAnjali Singhai Jain4-74/+50
Some registers have been removed so take them out and stop updating and looking at them. Change-ID: I33da922c8de993a94dd8b8d8a2ae2146b8ca1a27 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-24i40e: Use #define for the VSI connection typeNeerav Parikh2-4/+4
Use #defined VSI connection type values instead of using magic numbers. Change-ID: I2f6cf7bf394d391e1c0fe61779e9e4ad8858154a Signed-off-by: Neerav Parikh <neerav.parikh@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-24i40e/i40evf: restrict VC opcodes to their initial valuesNicholas Nunley2-44/+40
Until the time a more robust versioning scheme is needed/implemented all established virtual channel opcode values should remain consistent between updates to the opcode enum. This patch repositions I40E_VIRTCHNL_OP_CONFIG_RSS to the end of the enum. In its current position this opcode displaces the initial value of I40E_VIRTCHNL_OP_EVENT and will cause PF/VF compatibility issues. Going forward the expectation is either: a) All future opcode additions will be added as the last element of the enum. Once VF drivers start making use of the new commands the virtual channel version will need to be incremented and drivers will need to implement a simple version check whereby VF drivers can only load on PFs with a >= version. b) or, if needed, design and implement a more complicated API negotiation capability. In either case PF drivers should always maintain backwards compatibility with earlier VF driver versions. Change-ID: Ie245daa09a231b6680ed793d648bdcc76caefe58 Signed-off-by: Nicholas Nunley <nicholas.d.nunley@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-24i40e/i40evf: Refactor the receive routinesMitch Williams6-214/+651
Split the receive hot path code into two, one for packet split and one for single buffer. This improves receive performance since we only need to check if the ring is in packet split mode once per NAPI poll time, not several times per packet. The single buffer code is further improved by the removal of a bunch of code and several variables that are not needed. On a receive-oriented test this can improve single-threaded throughput. Also refactor the packet split receive path to use a fixed buffer for headers, like ixgbe does. This vastly reduces the number of DMA mappings and unmappings we need to do, allowing for much better performance in the presence of an IOMMU. Lastly, correct packet split descriptor types now that we are actually using them. Change-ID: I3a194a93af3d2c31e77ff17644ac7376da6f3e4b Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-24i40e: rename debugfs clear_stats optionShannon Nelson1-5/+9
Change debugfs command from "clear_stats pf" to "clear_stats port" to be clearer what the action is. Also, limit the action to the base PF, not the NPAR partitions. Change-ID: I22aa39c0962d83a83a985097b1000ed7f8c66f3f Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-24i40e: update Shadow RAM read/write functionsKamil Krawczyk2-27/+71
This change is to refactor the read/write functions to support future work. Change-ID: I13150d5e3042f2c617362c0140dc7e6473ebcdee Signed-off-by: Kamil Krawczyk <kamil.krawczyk@intel.com> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-24igbvf: cleanup msleep() and min/max() usageJeff Kirsher2-6/+6
Fixed a few cases of when we used msleep() when we should have been using usleep_range(). Also updated the usage of min/max() to use min_t/max_t(). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2015-02-24igbvf: Fix code comments and whitespaceJeff Kirsher9-516/+500
Fix the code comments to align with the drivers/net/ commenting style. Also fix other checkpatch errors such as using tabs where possible and properly wrap lines to conform to the 80 char limit (unless it is a string). Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com>
2015-02-24e1000e: initial support for i219David Ertman9-83/+768
i219 is the next-generation LOM that will be available on systems with the Sunrise Point Platform Controller Hub (PCH) chipset from Intel. This patch provides the initial support for the device. Signed-off-by: Dave Ertman <david.m.ertman@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Tested-by: Carmen Edwards <carmenx.edwards@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-10i40e: Fix for stats init function call in Rx setupCarolyn Wyborny2-2/+2
This patch fixes indentation issue and error found in argument reported by static analysis. Without this patch, sparse and other static analysis errors will be found. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reported-by: Julia Lawall <julia.lawall@lip6.fr> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-09i40e/i40evf: Add call to u64_stats_init to initCarolyn Wyborny2-0/+4
This patch adds a call to u64_stats_init to Rx setup. This done in order to avoid lockdep errors with seqcount on newer kernels. Change-ID: Ia8ba8f0bcbd1c0e926f97d70aeee4ce4fd055e93 Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: Enable Loopback for the FCOE vsi as wellAnjali Singhai Jain1-0/+1
For all VSIs on a VEB, Loopback mode should be either on or off. Our configuration requires them to be ON so that VSIs can directly talk to each other without going out on the wire. Change-ID: I77b8310bc846329972b13b185949ab1431a46c30 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: use dev_port for fcoe netdevVasu Dev1-0/+6
Set different dev_port value 1 for FCoE netdev than the default zero dev_port value for PF netdev, this helps biosdevname user tool to differentiate them correctly while both attached to the same PCI function. Change-ID: I8fb90e4ef52a1242f7580e49a3f0918735aee8ef Signed-off-by: Vasu Dev <vasu.dev@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: Fix function headerGreg Rose1-1/+1
s/enable/disable Change-ID: Ic0572a6c59d03e05a0a35d2e2e9d532e0512638d Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: fix led blink toggle to enable steady stateMatt Jared1-2/+4
Make sure to clear the GPIO blink field, instead of OR'ing against zero if the field is already '1'. Change-ID: Ie52a52abd48f6f52b20778a6b8b0c542dfc9245c Signed-off-by: Matt Jared <matthew.a.jared@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40evf: Force Tx writeback on ITRAnjali Singhai Jain3-4/+39
This patch forces Tx descriptor writebacks on ITR by kicking off the SWINT interrupt when we notice that there are non-cache-aligned Tx descriptors waiting in the ring while interrupts are disabled under NAPI. Change-ID: dd6d9675629bf266c7515ad7a201394618c35444 Signed-off-by: Anjali Singhai Jain <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: stop the service task at shutdownMitch Williams1-0/+2
Stop the service task in the shutdown handler, preventing it from accessing the admin queue after it had been closed. This fixes a panic that could occur when the system was shut down with a lot of VFs enabled. Change-ID: I286735e3842de472385bbf7ad68d30331e508add Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40evf: stop the watchdog for shutdownMitch Williams1-0/+6
Stop the watchdog during shutdown. Failing to do this causes a log full of admin queue errors and the occasional hang when the system is shut down. Change-ID: Ib2fd11213cca2fa589eb68577e86b1000c23c250 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40evf: ignore bogus messages from FWMitch Williams1-1/+1
Occasionally on shutdown, the FW will hand us a bunch of messages filled with zeros, which can cause us to spin trying to handle them. Just ignore these and get on with shutting down. Change-ID: I347e9648f7153ad5a7b7e0847b87f7aad5f3e0da Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40evf: reset on module unloadMitch Williams1-5/+10
When the module is being unloaded, don't wait for the PF to politely handle all of our admin queue requests, as that might take forever with a lot of VFs enabled. Instead, just stop everything and request a VF reset. When the original shutdown code was written, VF resets were unreliable, so we avoided them. But with production hardware and firmware, and the 1.x PF driver, this is no longer the case. This fixes a potential multi-minute delay on driver unload, VF disable, or system shutdown. Change-ID: Ib43d6d860ef6b9b8f26e8dce0615a0302608c7d9 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: add locking around VF resetMitch Williams2-6/+8
During VF deallocation, we need to lock out the VF reset code. However, we cannot depend on simply masking the interrupt, as this does not lock out the service task, which can still call the reset routine. Instead, leave the interrupt enabled, but add locking around the VF disable and reset routines. For the disable code, we wait to get the lock, as the reset code will take a finite amount of time to run. For the reset code, we just return if we fail to get the lock. Since we know that the VFs are being disabled, we don't need to handle the reset. This fixes a panic when disabling SR-IOV. Change-ID: Iea0a6cdef35c331f48c6d5b2f8e6f0e86322e7d8 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: Use even more ARQ descriptorsMitch Williams1-2/+2
When enabling 64 VFs and loading the VF driver in the host kernel, we can easily overrun the PF's admin receive queue. Double the size of this queue, and increase the work limit to allow the PF to handle more requests in a single pass through the service task. Change-ID: I0efbbdc61954bffad422a2f33c4b948a59370bf5 Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: delay after VF resetMitch Williams1-6/+6
Delay a minimum of 10ms after VF reset, to allow the hardware's internal FIFOs to flush. Change-ID: I8a02ddb28c9f0d7303a1eb21d0b2443e5b4c1cda Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: avoid use of uninitialized v_budget in i40e_init_msixJohn W Linville1-5/+5
This I40E_FCOE block increments v_budget before it has been initialized, then v_budget gets overwritten a few lines later. This patch just reorders the code hunks in what I believe was the intended sequence. Coverity: CID 1260099 Signed-off-by: John W Linville <linville@tuxdriver.com> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-09i40e: i40e_fcoe.c: Remove unused functionRickard Strandqvist1-9/+0
Remove the function i40e_rx_is_fip() that is not used anywhere. This was partially found by using a static code analysis program called cppcheck. Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se> Tested-by: Jim Young <james.m.young@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: add Tx anti spoofing supportDon Skidmore4-0/+47
This patch enables the ethertype Anti-Spoofing feature for affected devices. It is configured such that LLDP packets sent by a VF will be dropped. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: combine all of the tasks into a single service taskEmil Tantilov2-66/+87
This change combines the reset and watchdog tasklets into a single task. The advantage of this is that we can avoid multiple schedules of the reset task when we have a reset event needed due to either the mailbox going down or transmit packets being present on a link down. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: rewrite watchdog task to function similar to igbvfEmil Tantilov2-75/+113
This patch cleans up the logic dealing with link down/up by breaking down the link detection and up/down events into separate functions - similar to how these events are handled in other drivers. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: Add code to check for Tx hangEmil Tantilov2-19/+115
This patch adds code to allow for Tx hang checking. The idea is to provide more robust debug info in the event of a transmit unit hang. Similar to the logic in ixgbe. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: Fix ordering of shutdown to correctly disable Rx and TxEmil Tantilov1-21/+17
This patch updates the ordering of the shutdown path so that we attempt to shutdown the rings more gracefully. Basically the big changes are that we shutdown the main Rx filter in the case of Rx and we set the carrier_off state in the case of Tx so that packets stop being delivered from outside the driver. Then we shut down interrupts and NAPI. Finally we stop the rings from performing DMA and clean them. This is a bit more graceful than the previous path. CC: Alexander Duyck <alexander.h.duyck@redhat.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: set vlan_features in a single write instead of several ORsEmil Tantilov1-5/+5
Clean up the setting of vlan_features by enabling all features at once. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: add VXLAN offload support for X550 devicesDon Skidmore4-2/+113
Add support VXLAN receive checksum offload in X550 hardware. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: Cleanup probe to remove redundant attempt to ID PHYDon Skidmore1-3/+0
We always identify the PHY in our reset_hw path anyway so there is no need to do it in get_invariants(). The reason I even noticed this is that for new hardware (X550em) we don't assign some methods until later in probe and calling phy.ops.read_reg could lead to a panic. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: cleanup redundant default method set_rxpbaDon Skidmore1-1/+0
My original patch 6a14ee0cfb19 "ixgbe: Add X550 support function pointers" accidental set a default value for this structure member twice. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: fix setting port VLANEmil Tantilov1-5/+8
This patch fixes couple of issues introduced by commit 2b509c0cd292 ("ixgbe: cleanup ixgbe_ndo_set_vf_vlan") - fix setting of the VLAN inside ixgbe_enable_port_vlan() - disable the "hide VLAN" bit in PFQDE when port VLAN is disabled Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: add RSS support for X550Emil Tantilov2-0/+45
X550 provides RSS registers for configuring RSS per VF. This patch introduces ixgbevf_setup_vfmrqc() which uses the VFRETA, VFRSSRK and VFMRQC registers to configure RSS on X550. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbevf: enable multiple queue supportEmil Tantilov2-3/+20
This patch enables multiple queues and RSS support for the VF. Maximum of 2 queues are supported due to available vectors. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: allow multiple queues in SRIOV modeEmil Tantilov1-3/+0
ixgbe_set_sriov_queues() has the logic to allow multiple queues, this patch just removes the limitation. Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06ixgbe: cleanup sparse errors in new ixgbe_x550.c fileDon Skidmore1-30/+35
This patch cleans up prototypes that should have been defined as static. Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06fm10k: Resolve compile warnings with W=1Matthew Vick2-6/+2
Fix two cases where variables are being set but not used. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh<Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06fm10k: Validate VLAN ID in fm10k_update_xc_addr_pfMatthew Vick1-5/+2
Currently, fm10k_update_xc_addr_pf has an issue where it does not properly drop the upper-most four bits of the VLAN ID due to type promotion. Resolve the issue not by masking off the bits, but by throwing an error if the VLAN ID is out-of-bounds. Reported-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-02-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-11/+14
Conflicts: drivers/net/vxlan.c drivers/vhost/net.c include/linux/if_vlan.h net/core/dev.c The net/core/dev.c conflict was the overlap of one commit marking an existing function static whilst another was adding a new function. In the include/linux/if_vlan.h case, the type used for a local variable was changed in 'net', whereas the function got rewritten to fix a stacked vlan bug in 'net-next'. In drivers/vhost/net.c, Al Viro's iov_iter conversions in 'net-next' overlapped with an endainness fix for VHOST 1.0 in 'net'. In drivers/net/vxlan.c, vxlan_find_vni() added a 'flags' parameter in 'net-next' whereas in 'net' there was a bug fix to pass in the correct network namespace pointer in calls to this function. Signed-off-by: David S. Miller <davem@davemloft.net>
2015-02-02bridge: add flags argument to ndo_bridge_setlink and ndo_bridge_dellinkRoopa Prabhu1-1/+1
bridge flags are needed inside ndo_bridge_setlink/dellink handlers to avoid another call to parse IFLA_AF_SPEC inside these handlers This is used later in this series Signed-off-by: Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31ixgbevf: Fix checksum error when using stacked vlanToshiaki Makita1-2/+2
When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbevf_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use first->protocol instead of skb->protocol to get the proper network protocol. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31ixgbe: Fix checksum error when using stacked vlanToshiaki Makita1-1/+1
When a skb has multiple vlans and it is CHECKSUM_PARTIAL, ixgbe_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use vlan_get_protocol() to get the proper network protocol. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-31igbvf: Fix checksum error when using stacked vlanToshiaki Makita1-8/+11
When a skb has multiple vlans and it is CHECKSUM_PARTIAL, igbvf_tx_csum() fails to get the network protocol and checksum related descriptor fields are not configured correctly because skb->protocol doesn't show the L3 protocol in this case. Use vlan_get_protocol() to get the proper network protocol. Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2015-01-23net: e1000e: support txtd update delay via xmit_moreFlorian Westphal1-10/+15
Don't update Tx tail descriptor if queue hasn't been stopped and we know at least one more skb will be sent right away. Signed-off-by: Florian Westphal <fw@strlen.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23net: e1000: support txtd update delay via xmit_moreFlorian Westphal1-6/+9
Don't update Tx tail descriptor if we queue hasn't been stopped and we know at least one more skb will be sent right away. Signed-off-by: Florian Westphal <fw@strlen.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23igb: Indicate failure on vf reset for empty mac addressAlexander Graf1-2/+6
Commit 5ac6f91d changed the igb driver to expose a zero (empty) mac address to the VF on reset rather than a random one. However, that behavioral change also requires igbvf driver changes which can be hard especially when we want to talk to proprietary guest OSs. Looking at the code previous to the commit in Linux that made igbvf work with empty mac addresses (8d56b6d), we can see that on reset failure the driver will try to generate a new mac address with both the old and the new code. Furthermore, ixgbe does send reset failure when it detects an empty mac address (35055928c). So I think it's safe to make igb behave the same. With this patch I can successfully run a Windows 8.1 guest with an empty mac address and an assigned igbvf device that has no mac address set by the host. If anyone is aware of a guest driver that chokes on NACK returns of VF RESET commands, please speak up. Signed-off-by: Alexander Graf <agraf@suse.de> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2015-01-23fm10k: Increase the timeout for the data path resetMatthew Vick1-1/+1
Based on feedback from the hardware team, 100us is too short of a time to wait for the data path reset to complete and the recommendation is to increase this timeout to 150us. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Krishneil Singh <Krishneil.k.singh@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 20:41:22 +0300