summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/cavium
AgeCommit message (Collapse)AuthorFilesLines
2018-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds2-14/+38
Pull networking fixes from David Miller: 1) Various netfilter fixlets from Pablo and the netfilter team. 2) Fix regression in IPVS caused by lack of PMTU exceptions on local routes in ipv6, from Julian Anastasov. 3) Check pskb_trim_rcsum for failure in DSA, from Zhouyang Jia. 4) Don't crash on poll in TLS, from Daniel Borkmann. 5) Revert SO_REUSE{ADDR,PORT} change, it regresses various things including Avahi mDNS. From Bart Van Assche. 6) Missing of_node_put in qcom/emac driver, from Yue Haibing. 7) We lack checking of the TCP checking in one special case during SYN receive, from Frank van der Linden. 8) Fix module init error paths of mac80211 hwsim, from Johannes Berg. 9) Handle 802.1ad properly in stmmac driver, from Elad Nachman. 10) Must grab HW caps before doing quirk checks in stmmac driver, from Jose Abreu. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (81 commits) net: stmmac: Run HWIF Quirks after getting HW caps neighbour: skip NTF_EXT_LEARNED entries during forced gc net: cxgb3: add error handling for sysfs_create_group tls: fix waitall behavior in tls_sw_recvmsg tls: fix use-after-free in tls_push_record l2tp: filter out non-PPP sessions in pppol2tp_tunnel_ioctl() l2tp: reject creation of non-PPP sessions on L2TPv2 tunnels mlxsw: spectrum_switchdev: Fix port_vlan refcounting mlxsw: spectrum_router: Align with new route replace logic mlxsw: spectrum_router: Allow appending to dev-only routes ipv6: Only emit append events for appended routes stmmac: added support for 802.1ad vlan stripping cfg80211: fix rcu in cfg80211_unregister_wdev mac80211: Move up init of TXQs mac80211_hwsim: fix module init error paths cfg80211: initialize sinfo in cfg80211_get_station nl80211: fix some kernel doc tag mistakes hv_netvsc: Fix the variable sizes in ipsecv2 and rsc offload rds: avoid unenecessary cong_update in loop transport l2tp: clean up stale tunnel or session in pppol2tp_connect's error path ...
2018-06-13treewide: Use array_size() in vzalloc_node()Kees Cook1-3/+2
The vzalloc_node() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc_node(a * b, node) with: vzalloc_node(array_size(a, b), node) as well as handling cases of: vzalloc_node(a * b * c, node) with: vzalloc_node(array3_size(a, b, c), node) This does, however, attempt to ignore constant size factors like: vzalloc_node(4 * 1024, node) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc_node( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc_node( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc_node( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc_node( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc_node( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc_node( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc_node( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc_node( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc_node( - sizeof(char) * COUNT + COUNT , ...) | vzalloc_node( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc_node( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc_node( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc_node( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc_node( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc_node( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc_node( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc_node( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc_node( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc_node( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc_node( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc_node( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc_node(C1 * C2 * C3, ...) | vzalloc_node( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc_node(C1 * C2, ...) | vzalloc_node( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: Use array_size() in vzalloc()Kees Cook1-2/+2
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: Use array_size() in vmalloc()Kees Cook1-2/+3
The vmalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vmalloc(a * b) with: vmalloc(array_size(a, b)) as well as handling cases of: vmalloc(a * b * c) with: vmalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vmalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vmalloc( - sizeof(u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vmalloc( - sizeof(char) * COUNT + COUNT , ...) | vmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vmalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vmalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vmalloc(C1 * C2 * C3, ...) | vmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vmalloc(C1 * C2, ...) | vmalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-2/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13net: thunderx: prevent concurrent data re-writing by nicvf_set_rx_modeVadim Lomovtsev2-14/+38
For each network interface linux network stack issue ndo_set_rx_mode call in order to configure MAC address filters (e.g. for multicast filtering). Currently ThunderX NICVF driver has only one ordered workqueue to process such requests for all VFs. And because of that it is possible that subsequent call to ndo_set_rx_mode would corrupt data which is currently in use by nicvf_set_rx_mode_task. Which in turn could cause following issue: [...] [ 48.978341] Unable to handle kernel paging request at virtual address 1fffff0000000000 [ 48.986275] Mem abort info: [ 48.989058] Exception class = DABT (current EL), IL = 32 bits [ 48.994965] SET = 0, FnV = 0 [ 48.998020] EA = 0, S1PTW = 0 [ 49.001152] Data abort info: [ 49.004022] ISV = 0, ISS = 0x00000004 [ 49.007869] CM = 0, WnR = 0 [ 49.010826] [1fffff0000000000] address between user and kernel address ranges [ 49.017963] Internal error: Oops: 96000004 [#1] SMP [...] [ 49.072138] task: ffff800fdd675400 task.stack: ffff000026440000 [ 49.078051] PC is at prefetch_freepointer.isra.37+0x28/0x3c [ 49.083613] LR is at kmem_cache_alloc_trace+0xc8/0x1fc [...] [ 49.272684] [<ffff0000082738f0>] prefetch_freepointer.isra.37+0x28/0x3c [ 49.279286] [<ffff000008276bc8>] kmem_cache_alloc_trace+0xc8/0x1fc [ 49.285455] [<ffff0000082c0c0c>] alloc_fdtable+0x78/0x134 [ 49.290841] [<ffff0000082c15c0>] dup_fd+0x254/0x2f4 [ 49.295709] [<ffff0000080d1954>] copy_process.isra.38.part.39+0x64c/0x1168 [ 49.302572] [<ffff0000080d264c>] _do_fork+0xfc/0x3b0 [ 49.307524] [<ffff0000080d29e8>] SyS_clone+0x44/0x50 [...] This patch is to prevent such concurrent data write with spinlock. Reported-by: Dean Nelson <dnelson@redhat.com> Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-30drivers/net: Fix various unnecessary characters after logging newlinesJoe Perches1-1/+1
Remove and coalesce formats when there is an unnecessary character after a logging newline. These extra characters cause logging defects. Miscellanea: o Coalesce formats Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11liquidio: bump up driver version to 1.7.2 to match newer NIC firmwareFelix Manlunas1-1/+1
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-11liquidio: monitor all of Octeon's cores in watchdog threadFelix Manlunas1-1/+1
The liquidio_watchdog kernel thread is watching over only 12 cores of the Octeon CN23XX; it's neglecting the other 4 cores that are present in the CN2360. Fix it by defining LIO_MAX_CORES as 16. Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-08liquidio: support use of ethtool to set link speed of CN23XX-225 cardsWeilin Chang7-24/+425
Support setting the link speed of CN23XX-225 cards (which can do 25Gbps or 10Gbps) via ethtool_ops.set_link_ksettings. Also fix the function assigned to ethtool_ops.get_link_ksettings to use the new link_ksettings api completely (instead of partially via ethtool_convert_legacy_u32_to_link_mode). Signed-off-by: Weilin Chang <weilin.chang@cavium.com> Acked-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-05-02liquidio VF: indicate that disabling rx vlan offload is not allowedRaghu Vatsavayi1-0/+1
NIC firmware does not support disabling rx vlan offload, but the VF driver incorrectly indicates that it is supported. The PF driver already does the correct indication by clearing the NETIF_F_HW_VLAN_CTAG_RX bit in its netdev->hw_features. So just do the same thing in the VF. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Acked-by: Prasad Kanneganti <prasad.kanneganti@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30liquidio: fix spelling mistake: "mac_tx_multi_collison" -> ↵Colin Ian King1-1/+1
"mac_tx_multi_collision" Trivial fix to spelling mistake in oct_stats_strings text Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30liquidio: enhanced ethtool --set-channels featureIntiyaz Basha10-58/+316
Enhancing driver to accept max supported queues for ethtool --set-channels Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30liquidio: Moved common function setup_glists to lio_core.cIntiyaz Basha4-163/+87
Moved common function setup_glists to lio_core.c and reamed it to lio_setup_glists Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30liquidio: Moved common definition octnic_gather to octeon_network.hIntiyaz Basha3-39/+21
Moving common definition octnic_gather to octeon_network.h Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30liquidio: Moved common function delete_glists to lio_core.cIntiyaz Basha4-91/+51
Moved common function delete_glists to lio_core.c and renamed it to lio_delete_glists Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30liquidio: Moved common function list_delete_head to octeon_network.hIntiyaz Basha3-43/+24
Moved common function list_delete_head to octeon_network.h and renamed it to lio_list_delete_head Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-30liquidio: Moved common function if_cfg_callback to lio_core.cIntiyaz Basha4-67/+38
Moved common function if_cfg_callback to lio_core.c and renamed it to lio_if_cfg_callback. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27liquidio: add support for ndo_get_stats64 instead of ndo_get_statsPradeep Nalla5-71/+135
Support ndo_get_stats64 instead of ndo_get_stats. Also add stats for multicast and broadcast packets. Signed-off-by: Pradeep Nalla <pradeep.nalla@cavium.com> Acked-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-27liquidio: move a couple of functions to lio_core.cPradeep Nalla3-157/+154
To support the next patch in this series which has code that calls octnet_get_link_stats from two different .c files, move that function (and its dependency octnet_nic_stats_callback) to lio_core.c. Remove octnet_get_link_stats's static declaration and add its function prototype in octeon_network.h. Signed-off-by: Pradeep Nalla <pradeep.nalla@cavium.com> Acked-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-24liquidio: Swap VF representor Tx and Rx statisticsSrinivas Jampala1-7/+8
Swap VF representor tx and rx interface statistics since it is a virtual switchdev port and tx for VM should be rx for VF representor and vice-versa. Signed-off-by: Srinivas Jampala <srinivasa.jampala@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-21Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-nextDavid S. Miller1-1/+1
Daniel Borkmann says: ==================== pull-request: bpf-next 2018-04-21 The following pull-request contains BPF updates for your *net-next* tree. The main changes are: 1) Initial work on BPF Type Format (BTF) is added, which is a meta data format which describes the data types of BPF programs / maps. BTF has its roots from CTF (Compact C-Type format) with a number of changes to it. First use case is to provide a generic pretty print capability for BPF maps inspection, later work will also add BTF to bpftool. pahole support to convert dwarf to BTF will be upstreamed as well (https://github.com/iamkafai/pahole/tree/btf), from Martin. 2) Add a new xdp_bpf_adjust_tail() BPF helper for XDP that allows for changing the data_end pointer. Only shrinking is currently supported which helps for crafting ICMP control messages. Minor changes in drivers have been added where needed so they recalc the packet's length also when data_end was adjusted, from Nikita. 3) Improve bpftool to make it easier to feed hex bytes via cmdline for map operations, from Quentin. 4) Add support for various missing BPF prog types and attach types that have been added to kernel recently but neither to bpftool nor libbpf yet. Doc and bash completion updates have been added as well for bpftool, from Andrey. 5) Proper fix for avoiding to leak info stored in frame data on page reuse for the two bpf_xdp_adjust_{head,meta} helpers by disallowing to move the pointers into struct xdp_frame area, from Jesper. 6) Follow-up compile fix from BTF in order to include stdbool.h in libbpf, from Björn. 7) Few fixes in BPF sample code, that is, a typo on the netdevice in a comment and fixup proper dump of XDP action code in the tracepoint exception, from Wang and Jesper. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-20liquidio: Added ndo_get_vf_stats supportIntiyaz Basha5-0/+151
Added the ndo to gather VF statistics through the PF. Collect VF statistics via mailbox from VF. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-19bpf: make cavium thunder compatible w/ bpf_xdp_adjust_tailNikita V. Shirokov1-1/+1
w/ bpf_xdp_adjust_tail helper xdp's data_end pointer could be changed as well (only "decrease" of pointer's location is going to be supported). changing of this pointer will change packet's size. for cavium's thunder driver we will just calculate packet's length unconditionally Acked-by: Alexei Starovoitov <ast@kernel.org> Signed-off-by: Nikita V. Shirokov <tehnerd@tehnerd.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
2018-04-17liquidio: Enhanced ethtool statsIntiyaz Basha4-49/+86
1. Added red_drops stats. Inbound packets dropped by RED, buffer exhaustion 2. Included fcs_err, jabber_err, l2_err and frame_err errors under rx_errors 3. Included fifo_err, dmac_drop, red_drops, fw_err_pko, fw_err_link and fw_err_drop under rx_dropped 4. Included max_collision_fail, max_deferral_fail, total_collisions, fw_err_pko, fw_err_link, fw_err_drop and fw_err_pki under tx_dropped 5. Counting dma mapping errors 6. Added some firmware stats description and removed for some Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Acked-by: Satanand Burla <satananda.burla@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-09net: thunderx: rework mac addresses list to u64 arrayVadim Lomovtsev2-24/+11
It is too expensive to pass u64 values via linked list, instead allocate array for them by overall number of mac addresses from netdev. This eventually removes multiple kmalloc() calls, aviod memory fragmentation and allow to put single null check on kmalloc return value in order to prevent a potential null pointer dereference. Addresses-Coverity-ID: 1467429 ("Dereference null return value") Fixes: 37c3347eb247 ("net: thunderx: add ndo_set_rx_mode callback implementation for VF") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-04Merge tag 'kbuild-v4.17' of ↵Linus Torvalds1-35/+16
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - add a shell script to get Clang version - improve portability of build scripts - drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code - rename built-in.o which is now thin archive to built-in.a - process clean/build targets one by one to get along with -j option - simplify ld-option - improve building with CONFIG_TRIM_UNUSED_KSYMS - define KBUILD_MODNAME even for objects shared among multiple modules - avoid linking multiple instances of same objects from composite objects - move <linux/compiler_types.h> to c_flags to include it only for C files - clean-up various Makefiles * tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits) kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h> kbuild: clean up link rule of composite modules kbuild: clean up archive rule of built-in.a kbuild: remove partial section mismatch detection for built-in.a net: liquidio: clean up Makefile for simpler composite object handling lib: zstd: clean up Makefile for simpler composite object handling kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a kbuild: rename real-objs-y/m to real-obj-y/m kbuild: move modname and modname-multi close to modname_flags kbuild: simplify modname calculation kbuild: fix modname for composite modules kbuild: define KBUILD_MODNAME even if multiple modules share objects kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi kbuild: Use ls(1) instead of stat(1) to obtain file size kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS kbuild: move include/config/ksym/* to include/ksym/* kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module kbuild: restore autoksyms.h touch to the top Makefile kbuild: move 'scripts' target below kbuild: remove wrong 'touch' in adjust_autoksyms.sh ...
2018-04-01net: thunderx: add ndo_set_rx_mode callback implementation for VFVadim Lomovtsev1-1/+109
The ndo_set_rx_mode() is called from atomic context which causes messages response timeouts while VF to PF communication via MSIx. To get rid of that we're copy passed mc list, parse flags and queue handling of kernel request to ordered workqueue. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01net: thunderx: add workqueue control structures for handle ndo_set_rx_mode ↵Vadim Lomovtsev1-0/+17
request The kernel calls ndo_set_rx_mode() callback from atomic context which causes messaging timeouts between VF and PF (as they’re implemented via MSIx). So in order to handle ndo_set_rx_mode() we need to get rid of it. This commit implements necessary workqueue related structures to let VF queue kernel request processing in non-atomic context later. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01net: thunderx: add XCAST messages handlers for PFVadim Lomovtsev1-4/+41
This commit is to add message handling for ndo_set_rx_mode() callback at PF side. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01net: thunderx: add new messages for handle ndo_set_rx_mode callbackVadim Lomovtsev1-0/+12
The kernel calls ndo_set_rx_mode() callback supplying it will all necessary info, such as device state flags, multicast mac addresses list and so on. Since we have only 128 bits to communicate with PF we need to initiate several requests to PF with small/short operation each based on input data. So this commit implements following PF messages codes along with new data structures for them: NIC_MBOX_MSG_RESET_XCAST to flush all filters configured for this particular network interface (VF) NIC_MBOX_MSG_ADD_MCAST to add new MAC address to DMAC filter registers for this particular network interface (VF) NIC_MBOX_MSG_SET_XCAST to apply filtering configuration to filter control register Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01net: thunderx: add multicast filter management supportVadim Lomovtsev2-1/+153
The ThunderX NIC could be partitioned to up to 128 VFs and thus represented to system. Each VF is mapped to pair BGX:LMAC, and each of VF is configured by kernel individually. Eventually the bunch of VFs could be mapped onto same pair BGX:LMAC and thus could cause several multicast filtering configuration requests to LMAC with the same MAC addresses. This commit is to add ThunderX NIC BGX filtering manipulation routines. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01net: thunderx: add MAC address filter tracking for LMACVadim Lomovtsev1-14/+30
The ThunderX NIC has two Ethernet Interfaces (BGX) each of them could has up to four Logical MACs configured. Each of BGX has 32 filters to be configured for filtering ingress packets. The number of filters available to particular LMAC is from 8 (if we have four LMACs configured per BGX) up to 32 (in case of only one LMAC is configured per BGX). At the same time the NIC could present up to 128 VFs to OS as network interfaces, each of them kernel will configure with set of MAC addresses for filtering. So to prevent dupes in BGX filter registers from different network interfaces it is required to cache and track all filter configuration requests prior to applying them onto BGX filter registers. This commit is to update LMAC structures with control fields to allocate/releasing filters tracking list along with implementing dmac array allocate/release per LMAC. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-04-01net: thunderx: move filter register related macro into proper placeVadim Lomovtsev2-11/+13
The ThunderX NIC has set of registers which allows to configure filter policy for ingress packets. There are three possible regimes of filtering multicasts, broadcasts and unicasts: accept all, reject all and accept filter allowed only. Current implementation has enum with all of them and two generic macro for enabling filtering et all (CAM_ACCEPT) and enabling/disabling broadcast packets, which also should be corrected in order to represent register bits properly. All these values are private for driver and there is no need to ‘publish’ them via header file. This commit is to move filtering register manipulation values from header file into source with explicit assignment of exact register values to them to be used while register configuring. Signed-off-by: Vadim Lomovtsev <Vadim.Lomovtsev@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-30liquidio: prevent rx queues from getting stalledRaghu Vatsavayi4-19/+53
This commit has fix for RX traffic issues when we stress test the driver with continuous ifconfig up/down under very high traffic conditions. Reason for the issue is that, in existing liquidio_stop function NAPI is disabled even before actual FW/HW interface is brought down via send_rx_ctrl_cmd(lio, 0). Between time frame of NAPI disable and actual interface down in firmware, firmware continuously enqueues rx traffic to host. When interrupt happens for new packets, host irq handler fails in scheduling NAPI as the NAPI is already disabled. After "ifconfig <iface> up", Host re-enables NAPI but cannot schedule it until it receives another Rx interrupt. Host never receives Rx interrupt as it never cleared the Rx interrupt it received during interface down operation. NIC Rx interrupt gets cleared only when Host processes queue and clears the queue counts. Above anomaly leads to other issues like packet overflow in FW/HW queues, backpressure. Fix: This commit fixes this issue by disabling NAPI only after informing firmware to stop queueing packets to host via send_rx_ctrl_cmd(lio, 0). send_rx_ctrl_cmd is not visible in the patch as it is already there in the code. The DOWN command also waits for any pending packets to be processed by NAPI so that the deadlock will not occur. Signed-off-by: Raghu Vatsavayi <raghu.vatsavayi@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29net: cavium: use module_pci_driver to simplify the codeWei Yongjun1-12/+1
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-29liquidio: Prioritize control messagesIntiyaz Basha2-3/+8
During heavy tx traffic, control messages (sent by liquidio driver to NIC firmware) sometimes do not get processed in a timely manner. Reason is: the low-level metadata of control messages and that of egress network packets indicate that they have the same priority. Fix it by setting a higher priority for control messages through the new ctrl_qpg field in the oct_txpciq struct. It is the NIC firmware that does the actual setting of priority by writing to the new ctrl_qpg field; the host driver treats that value as opaque and just assigns it to pki_ih3->qpg Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-27liquidio: Removed duplicate Tx queue status checkIntiyaz Basha2-57/+0
Napi is checking Tx queue status and waking the Tx queue if required. Same operation is being done while freeing every Tx buffer. So removed the duplicate operation of checking Tx queue status from the Tx buffer free functions. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-26ethernet: Use octal not symbolic permissionsJoe Perches1-1/+1
Prefer the direct use of octal for permissions. Done with checkpatch -f --types=SYMBOLIC_PERMS --fix-inplace and some typing. Miscellanea: o Whitespace neatening around these conversions. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25liquidio: Renamed txqs_start to start_txqsIntiyaz Basha3-3/+3
For consistency renaming txqs_start to start_txqs Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25liquidio: Renamed txqs_stop to stop_txqsIntiyaz Basha3-4/+4
For consistency renaming txqs_stop to stop_txqs Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25liquidio: Renamed txqs_wake to wake_txqsIntiyaz Basha3-5/+5
For consistency renaming txqs_wake to wake_txqs Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25liquidio: Function call skb_iq for deriving queue from skbIntiyaz Basha2-4/+2
Using skb_iq function for deriving queue from skb Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25liquidio: Removed one line function wake_qIntiyaz Basha2-23/+3
Removing one line function wake_q Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25liquidio: Removed one line function stop_qIntiyaz Basha2-22/+2
Removing one line function stop_q Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25liquidio: Removed netif_is_multiqueue checkIntiyaz Basha4-152/+64
Removing checks for netif_is_multiqueue. Configuring single queue will be a multiqueue netdev with one queues. Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25liquidio: Removed start_txq functionIntiyaz Basha3-36/+12
Removing start_txq function from VF and PF files Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25liquidio: Removed one line function stop_txqIntiyaz Basha1-10/+1
Removing one line function stop_txq Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25liquidio: Moved common function skb_iq to to octeon_network.hIntiyaz Basha3-20/+10
Moving common function skb_iq to to octeon_network.h Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-03-25liquidio: Moved common function txqs_start to octeon_network.hIntiyaz Basha3-32/+17
Moving common function txqs_start to octeon_network.h Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com> Acked-by: Derek Chickles <derek.chickles@cavium.com> Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 02:47:36 +0300