summaryrefslogtreecommitdiff
path: root/drivers/net/ethernet/broadcom
AgeCommit message (Collapse)AuthorFilesLines
2012-12-03bnx2x: remove __dev* attributesBill Pemberton3-35/+35
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03net/broadcom: remove __dev* attributesBill Pemberton3-8/+8
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03tg3: remove __dev* attributesBill Pemberton1-47/+48
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Matt Carlson <mcarlson@broadcom.com> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03bnx2: remove __dev* attributesBill Pemberton1-10/+10
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Michael Chan <mchan@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03b44: remove __dev* attributesBill Pemberton1-4/+4
CONFIG_HOTPLUG is going away as an option. As result the __dev* markings will be going away. Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst, and __devexit. Signed-off-by: Bill Pemberton <wfp5p@virginia.edu> Cc: Gary Zambrano <zambrano@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-12-03bnx2x: recognize fan failureYaniv Rosner2-1/+11
If fan failure is detected, MCP prevents PCI I/O registers from being mapped to the bar, causing a fatal error as driver is unaware. This patch recognizes such an event occurred and gracefully terminates the probe process. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: Correct PFC disablementBarak Witkowski1-2/+5
bnx2x driver could only have enabled pfc via usage of dcbnl; now, it can also correctly disable it. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: fix 'Ethtool -A' when autonegYuval Mintz2-23/+28
When configuring pauses using 'ethtool -A', the requested values have effect when used together with autoneg (up to this point, when configured for autoneg, driver ignored requested pause configuration) Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: prevent DCB if disabled in nvramBarak Witkowski2-2/+14
Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: Handle a rarely missed interruptYaniv Rosner2-0/+16
A rare case of no link due to a missed interrupt may occur due to a race condition between acknowledging the IGU via the BAR and restoring the NIG interrupt mask via the GRC. To solve it, we wait for the IGU ack command to finish prior to restoring the NIG interrupt mask. Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: mask CPL_OF interruptYuval Mintz1-11/+10
Unmasked interrupt caused "FATAL HW block attention set2 0x20" messages to erroneously appear, as the associated interrupt is fully recoverable. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: IGU parse error cause probe failureBarak Witkowski1-5/+12
If IGU parse error is encountered during the probing process, the error propagates and the probe gracefully fails (until now, such errors were ignored, later causing mischief). Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: Ext. config accessed only on non-E1x.Yuval Mintz1-1/+2
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: nvram enables dropless flow controlYuval Mintz3-4/+31
It is now possible to enable dropless flow control via nvram. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: Correct advertised speed/duplexYuval Mintz1-8/+4
If link is down due to management (and not due to actual phy link being lost), driver should still behave as if the link is down; Querying via ethtool about speed/duplex state should result in 'UNKNOWN' (same behaviour as when link is actually down). Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: Filter packets on FCoE ringsDmitry Kravkov4-4/+17
Whenever bnx2x fails to transmit a packet due to a full Tx ring, if the ring size is zero (indicating an FCoE ring) driver filters the packet out and gracefully continues. Driver also gathers statistics on such filtered packets. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: Management can control PFC/ETSBarak Witkowski3-6/+24
If configured for PFC/ETS by management, configure chip regardless of the presence of a remote peer which supports DCBX. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: parity recovery flow enhancementBarak Witkowski1-13/+20
Parity recovery was enhanced in order to handle a few more corner cases. Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-12-03bnx2x: revised and corrected SPIO accessYuval Mintz2-23/+30
Changed naming convention of SPIO macros, and prevented access to invalid SPIOs. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28bnx2x: Change duplex setting in EEE functionYaniv Rosner1-2/+2
This is not a real problem, since the EEE is supported for devices where the actual_phy_selection is zero, such that the req_duplex of params will match the one of the phy struct. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28bnx2x: Add warning message in case of non-10G SFP moduleYaniv Rosner1-2/+8
The string was split to several lines since it reached over 180 chars, which seems too much. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28bnx2x: Cosmetic changesYaniv Rosner2-188/+127
This patch makes some cosmetic changes to the code: 1. Code alignment. 2. Merge read-modify-write into a single function (read_or_write / read_and_write). 3. Merge several write registers into a for-loop write using a static array. 4. Remove empty lines. 5. Fix comments. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28bnx2x: Always take PHY lockYaniv Rosner6-52/+11
Taking PHY lock is not required on some older designs, but we are removing this complication and always taking it since it is always required on newer designs and does not worth the code complication on the older boards. Taking PHY lock was initially required only on specific boards which had their MDC/MDIO bus crossed, but since this lock is now always required, for example, when NCSI is present, the PHY lock will always be taken. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28bnx2x: Add support for BCM84834Yaniv Rosner2-16/+67
Add support for the 10G-baseT PHY - BCM84834, which is the quad-port version of the dual-port BCM84833. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28bnx2x: Fix SFP+ current leakageYaniv Rosner1-46/+45
Per measurements, the SFP+ suffered from small current leakage in two cases: - When no module was plugged and TX laser was disabled. The fix was to enable it, and when module is plugged in, check if it needs to be disabled. - When over-current event occurs due to invalid SFP+ module, the HW basically shuts down the current for this module, but the SW needs to complete this by issuing a power down via a GPIO. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28bnx2x: Change MDIO clock settingsYaniv Rosner4-20/+66
When drivers works on top of an old bootcode, it is theoretically subjected to MDC/MDIO failures since the MDIO clock is set in the beginning of each sequence, rather than per CL45 command. On rare cases an old bootcodes may change that in the middle, so to address that, the MDIO clock is set for each CL45 access. In addition, setting the MDIO clock is now done per EMAC base, and not per port number, since a specific port can potentially use both EMACs for different PHY accesses. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28bnx2x: Add support for 20G-KR2Yaniv Rosner4-34/+365
Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-28bnx2x: Activate LFAYaniv Rosner3-1/+22
In case Link Flap Avoidance feature is supported by the MCP, bnx2x will enable it, and will pass the appropriate parameter when load request is sent to the MCP. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller1-4/+7
Conflicts: drivers/net/wireless/iwlwifi/pcie/tx.c Minor iwlwifi conflict in TX queue disabling between 'net', which removed a bogus warning, and 'net-next' which added some status register poking code. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-23bnx2x: remove redundant warning logAriel Elior1-4/+7
fix bug where a register which was only meant to be read in 578xx/57712 devices causes a bogus error message to be logged when read from other devices. Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-20bnx2x: Remove duplicate inclusion of bnx2x_hsi.hSachin Kamat1-1/+0
bnx2x_hsi.h was included twice. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-19treewide: fix typo of "suport" in various comments and KconfigMasanari Iida1-1/+1
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2012-11-15tg3: Use tp->rxq_cnt when checking RSS tables.Michael Chan1-4/+4
irq_cnt is no longer reliable since rxq_cnt can be independently configured. Update version to 3.127. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15tg3: Cleanup hardcoded ethtool test array indexesNithin Nayak Sujir1-29/+41
Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15tg3: Prevent spurious tx timeout by setting carrier off before tx disable.Nithin Nayak Sujir2-42/+57
The watchdog will not trigger when the carrier is off when reconfiguring the device. Because carrier state is now off during reset, we need to introduce a link_up flag to keep track of link state during PHY setup. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-15tg3: Set 10_100_ONLY flag for additional 10/100 Mbps devicesNithin Nayak Sujir2-27/+65
- Also refactor the conditional to use the existing tg3_pci_tbl array. - Set flags in the driver_data field of the pci_device_id structure to identify these devices. - Add PCI_DEVICE_SUB() to pci.h to declare PCI 4-part IDs to match these devices. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-13bnx2x: Add static declaration to several functionsMerav Sicron2-15/+15
This patch adds static declaration to several functions in bnx2x. It eliminates newly introduced sparse warnings reported by Fengguang Wu. Reported-by: Fengguang Wu <fengguang.wu@intel.com> Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-11Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller3-49/+128
Conflicts: drivers/net/ethernet/broadcom/bnx2x/bnx2x_main.c Minor conflict between the BCM_CNIC define removal in net-next and a bug fix added to net. Based upon a conflict resolution patch posted by Stephen Rothwell. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08bnx2x: Support loading cnic resources at run-timeMerav Sicron12-565/+1084
This patch replaces the BCM_CNIC define with a flag which can change at run-time and which does not use the CONFIG_CNIC kconfig option. For the PF/hypervisor driver cnic is always supported, however allocation of cnic resources and configuration of the HW for offload mode is done only when the cnic module registers bnx2x. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08bnx2x: HSI change for 'update' ramrodMerav Sicron1-5/+16
This patch updates the driver-FW HSI to support changes to the 'update' ramrod (FW supports this change since 7.8.2). This ramrod is sent when the cnic module registers bnx2x, to enable changing the nic_mode configuration in HW at run-time. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07tg3: Call tg3_netif_stop() from tg3_stop()Nithin Nayak Sujir1-5/+3
instead of making separate tg3_napi_disable() and netif_tx_disable() calls. Update version to 3.126. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07tg3: Support 5717 C0Michael Chan2-1/+10
Add support for 5717C0 which is a 5720A0 with special bonds-out option. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03net: bnx2x: Fix typo in bnx2x driverMasanari Iida2-3/+3
Correct spelling typo in bnx2x driver Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03bnx2x: fix HW initialization using fw 7.8.xDmitry Kravkov1-1/+2
Since commit 96bed4b9 (use FW 7.8.2) BRB HW block needs to be initialized using fw values for all devices. Otherwise ETS on 57712/578xx will not work. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Disable FCoE for 57840 since not yet supported by FWDmitry Kravkov1-1/+9
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix no link on 577xx 10G-baseTYaniv Rosner1-0/+5
Since the Warpcore supports various link types, need to set only the correct supported modes for XFI which is the serdes interface for the 10G-baseT PHY. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix unrecognized SFP+ module after driver is loadedYaniv Rosner1-7/+15
When SFP+ module is plugged in after driver is already loaded, it may not be recognized, so set SFP module recognition time up to 300ms, without resetting the module power in the middle. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix potential incorrect link speed provisionYaniv Rosner1-10/+12
Fix possible incorrect link speed provision following rapid link speed change. Clear link speed mask after each link change, and not only after link down. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Restore global registers back to default.Yaniv Rosner1-22/+56
Several KR registers were not set correctly back to default after loopback test, so set those global registers over the global WC lane (zero) rather than the current lane. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-01bnx2x: Fix link down in 57712 following LFAYaniv Rosner1-5/+18
In case of link flap avoidance between PXE boot and bnx2x, set the appropriate PHY DEVAD even if LFA kicks in. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Barak Witkowski <barak@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 02:16:45 +0300