summaryrefslogtreecommitdiff
path: root/drivers/mtd
AgeCommit message (Collapse)AuthorFilesLines
2010-08-06mtd: m25p80: add support for the Winbond W25Q32 SPI flash chipGabor Juhos1-0/+1
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
2010-08-06mtd: m25p80: add support for the Intel/Numonyx {16,32,64}0S33B SPI flash chipsGabor Juhos1-1/+7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: m25p80: add support for the EON EN25P{32, 64} SPI flash chipsGabor Juhos1-0/+4
Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: cfi_cmdset_0002: consider version 1.4 as a valid primary extension versionGuillaume LECERF1-3/+4
The Spansion S29WS-P device family uses CFI version 1.4 [1]. Consider it as a valid version. [1] http://www.spansion.com/Support/Datasheets/s29ws-p_00_a12_e.pdf Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: atmel_nand: fix warning: 'part_probes' defined but not usedAndreas Bießmann1-1/+1
This patch fixes drivers/mtd/nand/atmel_nand.c:372: warning: 'part_probes' defined but not used which is issued when CONFIG_MTD_PARTITIONS is defined but CONFIG_MTD_CMDLINE_PARTS not. Signed-off-by: Andreas Bießmann <biessmann@corscience.de> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: change struct flchip_shared spinlock locking into mutexStefani Seibold2-20/+20
This patch prevent to schedule while atomic by changing the flchip_shared spinlock into a mutex. This should be save since no atomic path will use this lock. It was suggested by Arnd Bergmann and Vasiliy Kulikov. Signed-off-by: Stefani Seibold <stefani@seibold.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: Missing slab.h includeDavid Miller1-0/+1
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: gen_nand: fix support for multiple chipsMarek Vasut1-1/+1
This patch corrects a problem where gen_nand driver assumed there can be only one chip and ignored the pdata->chip.nr_chips value. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: update description on sm_ftlMaxim Levitsky1-4/+7
I think that scary description can go now... Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06mtd: blkdevs: fix crash related to sysfs attributes.Maxim Levitsky1-3/+4
Remove the attributes group before disk to avoid use after free Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-06Merge branch 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds1-2/+2
* 'next-devicetree' of git://git.secretlab.ca/git/linux-2.6: (63 commits) of/platform: Register of_platform_drivers with an "of:" prefix of/address: Clean up function declarations of/spi: call of_register_spi_devices() from spi core code of: Provide default of_node_to_nid() implementation. of/device: Make of_device_make_bus_id() usable by other code. of/irq: Fix endian issues in parsing interrupt specifiers of: Fix phandle endian issues of/flattree: fix of_flat_dt_is_compatible() to match the full compatible string of: remove of_default_bus_ids of: make of_find_device_by_node generic microblaze: remove references to of_device and to_of_device sparc: remove references to of_device and to_of_device powerpc: remove references to of_device and to_of_device of/device: Replace of_device with platform_device in includes and core code of/device: Protect against binding of_platform_drivers to non-OF devices of: remove asm/of_device.h of: remove asm/of_platform.h of/platform: remove all of_bus_type and of_platform_bus_type references of: Merge of_platform_bus_type with platform_bus_type drivercore/of: Add OF style matching to platform bus ... Fix up trivial conflicts in arch/microblaze/kernel/Makefile due to just some obj-y removals by the devicetree branch, while the microblaze updates added a new file.
2010-08-05mtd: denali: update get nand para functionsChuanxiao Dong1-72/+35
In denali driver, wTotalBlocks variable is useless, so just remove them in get_toshiba_nand_para and get_hynix_nand_para first. Other wTotalBlocks in denali.c and other variables in dev_info struct are also useless, will remove them later. Also add a parameter in get_hynix_nand_para to prepare to remove dev_info struct. This parameter comes by reading NAND ID directly. Reading register will report wrong value for some NAND chips, e.g. some Micron MT29F32G08QAA chips. So update NAND_CMD_READID method as well. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: denali: rename functions which is named by using capitalsChuanxiao Dong2-16/+11
rename these functions' name and remove additional declarations in header file Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05Merge branch 'next' of ↵Linus Torvalds2-44/+1
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (79 commits) powerpc/8xx: Add support for the MPC8xx based boards from TQC powerpc/85xx: Introduce support for the Freescale P1022DS reference board powerpc/85xx: Adding DTS for the STx GP3-SSA MPC8555 board powerpc/85xx: Change deprecated binding for 85xx-based boards powerpc/tqm85xx: add a quirk for ti1520 PCMCIA bridge powerpc/tqm85xx: update PCI interrupt-map attribute powerpc/mpc8308rdb: support for MPC8308RDB board from Freescale powerpc/fsl_pci: add quirk for mpc8308 pcie bridge powerpc/85xx: Cleanup QE initialization for MPC85xxMDS boards powerpc/85xx: Fix booting for P1021MDS boards powerpc/85xx: Fix SWIOTLB initalization for MPC85xxMDS boards powerpc/85xx: kexec for SMP 85xx BookE systems powerpc/5200/i2c: improve i2c bus error recovery of/xilinxfb: update tft compatible versions powerpc/fsl-diu-fb: Support setting display mode using EDID powerpc/5121: doc/dts-bindings: update doc of FSL DIU bindings powerpc/5121: shared DIU framebuffer support powerpc/5121: move fsl-diu-fb.h to include/linux powerpc/5121: fsl-diu-fb: fix issue with re-enabling DIU area descriptor powerpc/512x: add clock structure for Video-IN (VIU) unit ...
2010-08-05Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linusLinus Torvalds3-0/+523
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (150 commits) MIPS: PowerTV: Separate PowerTV USB support from non-USB code MIPS: strip the un-needed sections of vmlinuz MIPS: Clean up the calculation of VMLINUZ_LOAD_ADDRESS MIPS: Clean up arch/mips/boot/compressed/decompress.c MIPS: Clean up arch/mips/boot/compressed/ld.script MIPS: Unify the suffix of compressed vmlinux.bin MIPS: PowerTV: Add Gaia platform definitions. MIPS: BCM47xx: Fix nvram_getenv return value. MIPS: Octeon: Allow more than 3.75GB of memory with PCIe MIPS: Clean up notify_die() usage. MIPS: Remove unused task_struct.trap_no field. Documentation: Mention that KProbes is supported on MIPS SAMPLES: kprobe_example: Make it print something on MIPS. MIPS: kprobe: Add support. MIPS: Add instrunction format for BREAK and SYSCALL MIPS: kprobes: Define regs_return_value() MIPS: Ritually kill stupid printk. MIPS: Octeon: Disallow MSI-X interrupt and fall back to MSI interrupts. MIPS: Octeon: Support 256 MSI on PCIe MIPS: Decode core number for R2 CPUs. ...
2010-08-05mtd: denali.c: fix reserved all check-patch errorsChuanxiao Dong1-49/+53
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: denali.c: fix all "line over 80 characters" warningsChuanxiao Dong1-108/+192
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: denali.c: add and update KERN_ facility level in printk()Chuanxiao Dong1-16/+16
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: denali.c: fixed all open brace { check-patch errorsChuanxiao Dong1-116/+48
Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05nand/denali Clean up all white spaces in code indentChuanxiao1-169/+168
Hi, I have changed the outlook mail cliet to be linux mutt client and use my personal gmail to submit patches. Here are 5 new patches to fix nand/denali check patch errors. The other 4 patches will be sent out after this mail. Thanks for your review. >From d125ad3f57bbf517131dccad6b5933edf8c2632a Mon Sep 17 00:00:00 2001 From: Chuanxiao Dong <chuanxiao.dong@intel.com> Date: Tue, 3 Aug 2010 15:54:48 +0800 Subject: [PATCH 1/5] mtd: denali.c: clean up all whitespaces in code indent Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: fix nand busy detectionBarry Song1-2/+2
The IRQSTAT register is a W1C register used by the interrupt handler and may have its BUSY bit changed. This makes it somewhat unreliable for the polling devready function. So switch it over to use the BUSY bit in the STAT register that always reflects the current state of the hardware. This fixes driver hangs seen when the NAND flash is under heavy system load (like I/O benchmarks). Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: fix handling of page sizesBarry Song1-38/+48
Rather than forcing the platform resources to declare the desired page size, simply use the existing information passed down to us by the higher layers. This way we work out of the box with all flash chips that the kernel knows about. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: wait for the ECC reset to finishBarry Song1-0/+2
When resetting the ECC registers/counters, the bit will automatically clear itself once the reset has actually finished. So make sure we wait for that to occur before doing anything else rather than assuming everything is peachy and proceeding with stale ECC values. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: fix typo for read/write delay setupBarry Song1-1/+1
We used the platform rd_dly field when we meant to use the wr_dly field. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: make sure to check NAND_ALE in cmd_ctrlBarry Song1-1/+1
The NAND base may send some controls which are neither CLE nor ALE, so we need to explicitly check both instead of assuming things are always one or the other. Otherwise, we sometimes send out illegal addresses to the NAND device. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: fix raw page write/read handlingBarry Song1-0/+18
Our write_buf/read_buf funcs always do ECC in HW ECC mode. That is not needed for raw funcs. In fact, write_buf/read_buf should be a pure func for data input/output while chip->ecc.hwctl controls ECC. Unfortunately, we can't separate ECC from normal data input/output in our NFC, so our DMA write_buf/read_buf entries are coupled with ECC operations closely. Thus we need to provide dedicated read_page_raw/write_page_raw funcs where we do non-DMA transactions so as to avoid automatic ECC. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05mtd: Blackfin NFC: delete useless comment about jffs2Barry Song1-3/+0
The low level NAND driver doesn't care about filesystems, so punt the local comment indicating otherwise. Signed-off-by: Barry Song <barry.song@analog.com> Signed-off-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-05MTD: Nand: Add JZ4740 NAND driverLars-Peter Clausen3-0/+523
Add support for the NAND controller on JZ4740 SoCs. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Cc: David Woodhouse <dwmw2@infradead.org> Cc: linux-mtd@lists.infradead.org Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/1470/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-08-04Merge branch 'master' into for-nextJiri Kosina7-100/+205
2010-08-04Merge branch 'devel-map-io' into omap-for-linusTony Lindgren1-26/+7
2010-08-04mtd: cfi_cmdset_0002: fix the check for valid primary extension versionsGuillaume LECERF1-3/+12
Valid primary extension versions are: 1.0, 1.1, 1.2, 1.3 [1][2]. Fix the check in cfi_cmdset_0002 accordingly. [1] http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_r20.pdf, page 19 [2] http://www.amd.com/us-en/assets/content_type/DownloadableAssets/cfi_100_20011201.pdf Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Guillaume LECERF <glecerf@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: m25p80: Make jedec_probe() return proper errno valuesAnton Vorontsov1-12/+6
spi_write_then_read() may return its own return codes (e.g. -EIO), so let's propagate the value down to the probe(). Also, remove jedec == 0 check, it isn't needed as nowadays we use dedicated SPI device IDs for non-JEDEC flashes. Suggested-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: m25p80: Fix false-positive probingAnton Vorontsov1-2/+11
Since commit 18c6182bae0acca220ed6611f741034d563cd19f ("Rework probing/JEDEC code"), m25p80 driver successfully registers chips even if JEDEC probing fails. This was needed to support non-JEDEC flashes. Though, it appears that some platforms (e.g. blackfin bf533 stamp[1]) used the old behavior to detect if there's any flash connected, so the driver have to fail on JEDEC probing errors. This patch restores the old behavior for JEDEC flashes, and adds "-nonjedec" SPI device IDs for M25Pxx flashes, so that the kernel still supports non-JEDEC flashes. [1] http://blackfin.uclinux.org/gf/project/uclinux-dist/tracker/?action=TrackerItemEdit&tracker_item_id=5975 Reported-by: Mingquan Pan Reported-by: Barry Song <21cnbao@gmail.com> Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: mtdchar: fix mmap for MTD RAM/ROM char devicesAnatolij Gustschin1-1/+27
For no-mmu systems mmap() on RAM/ROM devices already works but for systems with mmu it probably was not tested and doesn't work. This patch allows using mmap() on MTD RAM/ROM devices on systems with MMU. It has been tested on mpc5121e based platform with MR0A16A MRAM device attached over LocalBus. Signed-off-by: Anatolij Gustschin <agust@denx.de> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: ixp4xx: add support for static flash partitionsRichard Cochran1-8/+27
This patch adds support for static flash partitioning from a platform device. Also, we clean up some weirdness where statements were separated by commas instead of semicolons. While we are at it, fix some minor bad white space, too. Signed-off-by: Richard Cochran <richard.cochran@omicron.at> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: mxc_nand: dont call suspend and resume explicitlyEric Bénard1-42/+1
The mtd layer is responsible to call mtd->{suspend,resume}. Doing it again in the driver is wrong and results in a warning: nand_resume called for a chip which is not in suspended state at resume time. Removing the calls from the resume and suspend functions makes them empty allowing them to be deleted completely. Signed-off-by: Eric Bénard <eric@eukrea.com> Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: doc2000: fix uninitialized variable in doc_ecc_decode()Mark Ware1-2/+3
The variable 'syn' was being used uninitialized. Also fixed incorrect use of syn[] vs s[]. Tested on powerpc board with 64MiB DOC2000. Signed-off-by: Mark Ware <mware@elphinstone.net> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: OneNAND: Samsung SoCs use own chip_probe functionKyungmin Park1-13/+8
Samsung SoCs use own chip_probe function. Don't touch the memory configuration at probe time. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04mtd: OneNAND: Introduce chip_probe functionKyungmin Park1-12/+30
Samsung SoCs use the own OneNAND controler and detect OneNAND chip at power on. To use this feature, introduce the chip_probe function. Also remove workaround for Samsung SoCs. Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-04Merge branch 'linux-next' of git://git.infradead.org/ubi-2.6Linus Torvalds6-74/+198
* 'linux-next' of git://git.infradead.org/ubi-2.6: UBI: do not warn unnecessarily UBI: do not print message about corruptes PEBs if we have none of them UBI: improve delete-compatible volumes handling UBI: fix error message and compilation warnings UBI: generate random image_seq when formatting MTD devices UBI: improve ECC error message UBI: improve corrupted flash handling UBI: introduce eraseblock counter variables UBI: introduce a new IO return code UBI: simplify IO error codes
2010-08-03pcmcia: use struct resource for PCMCIA devices, part 2Dominik Brodowski1-1/+0
Use struct resource * also for iomem resources. CC: linux-mtd@lists.infradead.org CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-03pcmcia: remove memreq_tDominik Brodowski1-7/+6
Page already had to be set to 0; Offset can easily be passed as parameter to pcmcia_map_mem_page. CC: netdev@vger.kernel.org CC: linux-wireless@vger.kernel.org CC: linux-ide@vger.kernel.org CC: linux-usb@vger.kernel.org CC: laforge@gnumonks.org CC: linux-mtd@lists.infradead.org CC: linux-bluetooth@vger.kernel.org CC: alsa-devel@alsa-project.org CC: linux-serial@vger.kernel.org CC: Michael Buesch <mb@bu3sch.de> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-08-02omap3 nand: cleanup virtual address usagesSukumar Ghorai1-161/+53
This patch removes direct reference of gpmc address from generic nand platform code. Nand platform code now uses wrapper functions which are implemented in gpmc module. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02omap3 gpmc: functionality enhancementSukumar Ghorai1-2/+2
few functions added in gpmc module and to be used by other drivers like NAND. Signed-off-by: Sukumar Ghorai <s-ghorai@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02mtd: onenand:fix for page addr calculation based on device typeRohit Hassan Sathyanarayan1-2/+5
Sending the patch for page address calculation based on device type. This resolves the OneNAND DDP device read problem as pointed by Enric. http://lists.infradead.org/pipermail/linux-mtd/2010-July/030920.html Signed-off-by: Rohit HS <rohit.hs@samsung.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02mtd: nand: update nand_default_block_markbad()Brian Norris1-10/+24
This is an update that depends on the previous patches I sent. We can now write to all the appropriate BB marker locations (i.e. pages 1 AND 2, bytes 1 AND 6) with nand_default_block_markbad() if necessary, according to the flags marked in chip->options. Note that I removed the line: ofs += mtd->oobsize; Unless I am wrong, this line was completely unnecessary in the first place. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02mtd: denali.h: fixed checkpatch errorsDong, Chuanxiao1-82/+78
Fix all checkpatch.pl complaints. Artem: tweaked a little and fix tab indentations, so now this is not only about checkpatch, but also about making indentations look sane. Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02mtd: nand: davinci: correct 4-bit error correctionSudhakar Rajashekhara1-0/+17
On TI's DA830/OMAP-L137, DA850/OMAP-L138 and DM365, after setting the 4BITECC_ADD_CALC_START bit in the NAND Flash control register to 1 and before waiting for the NAND Flash status register to be equal to 1, 2 or 3, we have to wait till the ECC HW goes to correction state. Without this wait, ECC correction calculations will not be proper. This has been tested on DA830/OMAP-L137, DA850/OMAP-L138, DM355 and DM365 EVMs. Signed-off-by: Sudhakar Rajashekhara <sudhakar.raj@ti.com> Acked-by: Sneha Narnakaje <nsnehaprabha@ti.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02mtd: nand: more BB Detection refactoring and dynamic scan optionsBrian Norris2-55/+86
This is a revision to PATCH 2/2 that I sent. Link: http://lists.infradead.org/pipermail/linux-mtd/2010-July/030911.html Added new flag for scanning of both bytes 1 and 6 of the OOB for a BB marker (instead of simply one or the other). The "check_pattern" and "check_short_pattern" functions were updated to include support for scanning the two different locations in the OOB. In order to handle increases in variety of necessary scanning patterns, I implemented dynamic memory allocation of nand_bbt_descr structs in new function 'nand_create_default_bbt_descr()'. This replaces some increasingly-unwieldy, statically-declared descriptors. It can replace several more (e.g. "flashbased" structs). However, I do not test the flashbased options personally. How this was tested: I referenced 30+ data sheets (covering 100+ parts), and I tested a selection of 10 different chips to varying degrees. Particularly, I tested the creation of bad-block descriptors and basic BB scanning on three parts: ST NAND04GW3B2D, 2K page ST NAND128W3A, 512B page Samsung K9F1G08U0A, 2K page To test these, I wrote some fake bad block markers to the flash (in OOB bytes 1, 6, and elsewhere) to see if the scanning routine would detect them properly. However, this method was somewhat limited because the driver I am using has some bugs in its OOB write functionality. Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2010-08-02mtd: nand: refactor BB marker detectionBrian Norris2-11/+58
Some level of support for various scanning locations was already built in, but this required clean-up. First, BB marker location cannot be determined _only_ by the page size. Instead, I implemented some heuristic detection based on data sheets from various manufacturers (all found in nand_base.c:nand_get_flash_type()). Second, once these options were identified, they were not handled properly by nand_bbt.c:nand_default_bbt(). I updated the static nand_bbt_desc structs to reflect the need for more combinations of detection. The memory allocation here probably needs to be done dynamically in the very near future (see next patches). Signed-off-by: Brian Norris <norris@broadcom.com> Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-28 14:16:16 +0300