summaryrefslogtreecommitdiff
path: root/drivers/mtd/ubi
AgeCommit message (Collapse)AuthorFilesLines
2021-04-15ubi: Remove unnecessary struct declarationWan Jiabing1-2/+0
struct ubi_wl_entry is defined at 178th line. The declaration here is unnecessary. Remove it. Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Wan Jiabing <wanjiabing@vivo.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-04-15ubi: Fix fall-through warnings for ClangGustavo A. R. Silva1-0/+1
In preparation to enable -Wimplicit-fallthrough for Clang, fix a warning by explicitly adding a break statement instead of letting the code fall through to the next case. Link: https://github.com/KSPP/linux/issues/115 Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-02-12ubi: eba: Delete useless kfree codeZheng Yongjun1-1/+0
The parameter of kfree function is NULL, so kfree code is useless, delete it. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2021-02-12ubi: remove dead code in validate_vid_hdr()Jubin Zhong1-6/+1
data_size is already checked against zero when vol_type matches UBI_VID_STATIC. Remove the following dead code. Signed-off-by: Jubin Zhong <zhongjubin@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-18Merge tag 'for-linus-5.11-rc1' of ↵Linus Torvalds2-6/+9
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull jffs2, ubi and ubifs updates from Richard Weinberger: "JFFS2: - Fix for a remount regression - Fix for an abnormal GC exit - Fix for a possible NULL pointer issue while mounting UBI: - Add support ECC-ed NOR flash - Removal of dead code UBIFS: - Make node dumping debug code more reliable - Various cleanups: less ifdefs, less typos - Fix for an info leak" * tag 'for-linus-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubifs: ubifs_dump_node: Dump all branches of the index node ubifs: ubifs_dump_sleb: Remove unused function ubifs: Pass node length in all node dumping callers Revert "ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len" ubifs: Limit dumping length by size of memory which is allocated for the node ubifs: Remove the redundant return in dbg_check_nondata_nodes_order jffs2: Fix NULL pointer dereference in rp_size fs option parsing ubifs: Fixed print foramt mismatch in ubifs ubi: Do not zero out EC and VID on ECC-ed NOR flashes jffs2: remove trailing semicolon in macro definition ubifs: Fix error return code in ubifs_init_authentication() ubifs: wbuf: Don't leak kernel memory to flash ubi: Remove useless code in bytes_str_to_int ubifs: Fix the printing type of c->big_lpt jffs2: Allow setting rp_size to zero during remounting jffs2: Fix ignoring mounting options problem during remounting jffs2: Fix GC exit abnormally ubifs: Code cleanup by removing ifdef macro surrounding jffs2: Fix if/else empty body warnings ubifs: Delete duplicated words + other fixes
2020-12-13ubi: Do not zero out EC and VID on ECC-ed NOR flashesPratyush Yadav2-4/+9
For NOR flashes EC and VID are zeroed out before an erase is issued to make sure UBI does not mistakenly treat the PEB as used and associate it with an LEB. But on some flashes, like the Cypress Semper S28 SPI NOR flash family, multi-pass page programming is not allowed on the default ECC scheme. This means zeroing out these magic numbers will result in the flash throwing a page programming error. Do not zero out EC and VID for such flashes. A writesize > 1 is an indication of an ECC-ed flash. Signed-off-by: Pratyush Yadav <p.yadav@ti.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-12-13ubi: Remove useless code in bytes_str_to_intk005240211-2/+0
As a local variable, "endp" is neither refered nor returned after this line "endp += 2", it looks like a useless code, suggest to remove it. Signed-off-by: Chengsong Ke <kechengsong@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-11-20mtd: ubi: gluebi: Fix misnamed function parameter documentationLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/mtd/ubi/gluebi.c:446: warning: Function parameter or member 'ns_ptr' not described in 'gluebi_notify' drivers/mtd/ubi/gluebi.c:446: warning: Excess function parameter 'ptr' description in 'gluebi_notify' Cc: Richard Weinberger <richard@nod.at> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-15-lee.jones@linaro.org
2020-11-20mtd: ubi: wl: Fix a couple of kernel-doc issuesLee Jones1-2/+1
Fixes the following W=1 kernel build warning(s): drivers/mtd/ubi/wl.c:584: warning: Function parameter or member 'nested' not described in 'schedule_erase' drivers/mtd/ubi/wl.c:1075: warning: Excess function parameter 'shutdown' description in '__erase_worker' Cc: Richard Weinberger <richard@nod.at> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-13-lee.jones@linaro.org
2020-11-20mtd: ubi: eba: Fix a couple of misdocumentation issuesLee Jones1-1/+2
Fixes the following W=1 kernel build warning(s): drivers/mtd/ubi/eba.c:1304: warning: Function parameter or member 'vidb' not described in 'ubi_eba_copy_leb' drivers/mtd/ubi/eba.c:1304: warning: Excess function parameter 'vid_hdr' description in 'ubi_eba_copy_leb' drivers/mtd/ubi/eba.c:1483: warning: Function parameter or member 'ai' not described in 'print_rsvd_warning' Cc: Richard Weinberger <richard@nod.at> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-12-lee.jones@linaro.org
2020-11-20mtd: ubi: kapi: Correct documentation for 'ubi_leb_read_sg's 'sgl' parameterLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/mtd/ubi/kapi.c:464: warning: Function parameter or member 'sgl' not described in 'ubi_leb_read_sg' drivers/mtd/ubi/kapi.c:464: warning: Excess function parameter 'buf' description in 'ubi_leb_read_sg' Cc: Richard Weinberger <richard@nod.at> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-11-lee.jones@linaro.org
2020-11-20mtd: ubi: build: Document 'ubi_num' in struct mtd_dev_paramLee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/mtd/ubi/build.c:61: warning: Function parameter or member 'ubi_num' not described in 'mtd_dev_param' Cc: Richard Weinberger <richard@nod.at> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: linux-mtd@lists.infradead.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Link: https://lore.kernel.org/linux-mtd/20201109182206.3037326-9-lee.jones@linaro.org
2020-09-17ubi: check kthread_should_stop() after the setting of task stateZhihao Cheng1-0/+13
A detach hung is possible when a race occurs between the detach process and the ubi background thread. The following sequences outline the race: ubi thread: if (list_empty(&ubi->works)... ubi detach: set_bit(KTHREAD_SHOULD_STOP, &kthread->flags) => by kthread_stop() wake_up_process() => ubi thread is still running, so 0 is returned ubi thread: set_current_state(TASK_INTERRUPTIBLE) schedule() => ubi thread will never be scheduled again ubi detach: wait_for_completion() => hung task! To fix that, we need to check kthread_should_stop() after we set the task state, so the ubi thread will either see the stop bit and exit or the task state is reset to runnable such that it isn't scheduled out indefinitely. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Cc: <stable@vger.kernel.org> Fixes: 801c135ce73d5df1ca ("UBI: Unsorted Block Images") Reported-by: syzbot+853639d0cb16c31c7a14@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger <richard@nod.at>
2020-08-11Merge tag 'for-linus-5.9-rc1' of ↵Linus Torvalds2-1/+7
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull JFFS2, UBI and UBIFS updates from Richard Weinberger: "JFFS2: - Fix for a corner case while mounting - Fix for an use-after-free issue UBI: - Fix for a memory load while attaching - Don't produce an anchor PEB with fastmap being disabled UBIFS: - Fix for orphan inode logic - Spelling fixes - New mount option to specify filesystem version" * tag 'for-linus-5.9-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: jffs2: fix UAF problem jffs2: fix jffs2 mounting failure ubifs: Fix wrong orphan node deletion in ubifs_jnl_update|rename ubi: fastmap: Free fastmap next anchor peb during detach ubi: fastmap: Don't produce the initial next anchor PEB when fastmap is disabled ubifs: misc.h: delete a duplicated word ubifs: add option to specify version for new file systems
2020-08-03ubi: fastmap: Free fastmap next anchor peb during detachZhihao Cheng1-0/+5
ubi_wl_entry related with the fm_next_anchor PEB is not freed during detach, which causes a memory leak. Don't forget to release fm_next_anchor PEB while detaching ubi from mtd when CONFIG_MTD_UBI_FASTMAP is enabled. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Fixes: 4b68bf9a69d22d ("ubi: Select fastmap anchor PEBs considering...") Signed-off-by: Richard Weinberger <richard@nod.at>
2020-08-03ubi: fastmap: Don't produce the initial next anchor PEB when fastmap is disabledZhihao Cheng1-1/+2
Following process triggers a memleak caused by forgetting to release the initial next anchor PEB (CONFIG_MTD_UBI_FASTMAP is disabled): 1. attach -> __erase_worker -> produce the initial next anchor PEB 2. detach -> ubi_fastmap_close (Do nothing, it should have released the initial next anchor PEB) Don't produce the initial next anchor PEB in __erase_worker() when fastmap is disabled. Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Suggested-by: Sascha Hauer <s.hauer@pengutronix.de> Fixes: f9c34bb529975fe ("ubi: Fix producing anchor PEBs") Reported-by: syzbot+d9aab50b1154e3d163f5@syzkaller.appspotmail.com Signed-off-by: Richard Weinberger <richard@nod.at>
2020-07-16treewide: Remove uninitialized_var() usageKees Cook1-1/+1
Using uninitialized_var() is dangerous as it papers over real bugs[1] (or can in the future), and suppresses unrelated compiler warnings (e.g. "unused variable"). If the compiler thinks it is uninitialized, either simply initialize the variable or make compiler changes. In preparation for removing[2] the[3] macro[4], remove all remaining needless uses with the following script: git grep '\buninitialized_var\b' | cut -d: -f1 | sort -u | \ xargs perl -pi -e \ 's/\buninitialized_var\(([^\)]+)\)/\1/g; s:\s*/\* (GCC be quiet|to make compiler happy) \*/$::g;' drivers/video/fbdev/riva/riva_hw.c was manually tweaked to avoid pathological white-space. No outstanding warnings were found building allmodconfig with GCC 9.3.0 for x86_64, i386, arm64, arm, powerpc, powerpc64le, s390x, mips, sparc64, alpha, and m68k. [1] https://lore.kernel.org/lkml/20200603174714.192027-1-glider@google.com/ [2] https://lore.kernel.org/lkml/CA+55aFw+Vbj0i=1TGqCR5vQkCzWJ0QxK6CernOU6eedsudAixw@mail.gmail.com/ [3] https://lore.kernel.org/lkml/CA+55aFwgbgqhbp1fkxvRKEpzyR5J8n1vKT1VZdz9knmPuXhOeg@mail.gmail.com/ [4] https://lore.kernel.org/lkml/CA+55aFz2500WfbKXAx8s67wrm9=yVJu65TpLgN_ybYNv0VEOKA@mail.gmail.com/ Reviewed-by: Leon Romanovsky <leonro@mellanox.com> # drivers/infiniband and mlx4/mlx5 Acked-by: Jason Gunthorpe <jgg@mellanox.com> # IB Acked-by: Kalle Valo <kvalo@codeaurora.org> # wireless drivers Reviewed-by: Chao Yu <yuchao0@huawei.com> # erofs Signed-off-by: Kees Cook <keescook@chromium.org>
2020-06-10Merge tag 'for-linus-5.8-rc1' of ↵Linus Torvalds4-25/+57
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI update from Richard Weinberger: "This contains a single change for UBI: - Select fastmap anchor PEBs considering wear level rules" * tag 'for-linus-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: Select fastmap anchor PEBs considering wear level rules
2020-06-10Merge tag 'mtd/for-5.8' of ↵Linus Torvalds1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux Pull MTD updates from Richard Weinberger: "MTD core changes: - partition parser: Support MTD names containing one or more colons. - mtdblock: clear cache_state to avoid writing to bad blocks repeatedly. Raw NAND core changes: - Stop using nand_release(), patched all drivers. - Give more information about the ECC weakness when not matching the chip's requirement. - MAINTAINERS updates. - Support emulated SLC mode on MLC NANDs. - Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. - Take check_only into account. - Add an invalid ECC mode to discriminate with valid ones. - Return an enum from of_get_nand_ecc_algo(). - Drop OOB_FIRST placement scheme. - Introduce nand_extract_bits(). - Ensure a consistent bitflips numbering. - BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. - Fix nand_gpio_waitrdy(). - Propage CS selection to sub operations. - Add a NAND_NO_BBM_QUIRK flag. - Give the possibility to verify a read operation is supported. - Add a helper to check supported operations. - Avoid indirect access to ->data_buf(). - Rename the use_bufpoi variables. - Fix comments about the use of bufpoi. - Rename a NAND chip option. - Reorder the nand_chip->options flags. - Translate obscure bitfields into readable macros. - Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: - Fixed many error paths. - Arasan - New driver - Au1550nd: - Various cleanups - Migration to ->exec_op() - brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including <linux/version.h>. - Correctly verify erased pages. - Fix Hamming OOB layout. - Cadence - Make cadence_nand_attach_chip static. - Cafe: - Set the NAND_NO_BBM_QUIRK flag - cmx270: - Remove this controller driver. - cs553x: - Misc cleanup - Migration to ->exec_op() - Davinci: - Misc cleanup. - Migration to ->exec_op() - Denali: - Add more delays before latching incoming data - Diskonchip: - Misc cleanup - Migration to ->exec_op() - Fsmc: - Change to non-atomic bit operations. - GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. - Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. - Marvell: - Misc cleanup and small fixes - Nandsim: - Fix the error paths, driver wide. - Omap_elm: - Fix runtime PM imbalance. - STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes). SPI NOR core changes: - Add, update support and fix few flashes. - Prepare BFPT parsing for JESD216 rev D. - Kernel doc fixes. CFI changes: - Support the absence of protection registers for Intel CFI flashes. - Replace zero-length array with flexible-arrays" * tag 'mtd/for-5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (208 commits) mtd: clear cache_state to avoid writing to bad blocks repeatedly mtd: parser: cmdline: Support MTD names containing one or more colons mtd: physmap_of_gemini: remove defined but not used symbol 'syscon_match' mtd: rawnand: Add an invalid ECC mode to discriminate with valid ones mtd: rawnand: Return an enum from of_get_nand_ecc_algo() mtd: rawnand: Drop OOB_FIRST placement scheme mtd: rawnand: Avoid a typedef mtd: Fix typo in mtd_ooblayout_set_databytes() description mtd: rawnand: Stop using nand_release() mtd: rawnand: nandsim: Reorganize ns_cleanup_module() mtd: rawnand: nandsim: Rename a label in ns_init_module() mtd: rawnand: nandsim: Manage lists on error in ns_init_module() mtd: rawnand: nandsim: Fix the label pointing on nand_cleanup() mtd: rawnand: nandsim: Free erase_block_wear on error mtd: rawnand: nandsim: Use an additional label when freeing the nandsim object mtd: rawnand: nandsim: Stop using nand_release() mtd: rawnand: nandsim: Free the partition names in ns_free() mtd: rawnand: nandsim: Free the allocated device on error in ns_init() mtd: rawnand: nandsim: Free partition names on error in ns_init() mtd: rawnand: nandsim: Fix the two ns_alloc_device() error paths ...
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport1-1/+1
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-02ubi: Select fastmap anchor PEBs considering wear level rulesArne Edholm4-25/+57
There is a risk that the fastmap anchor PEB is alternating between just two PEBs, the current anchor and the previous anchor that was just deleted. As the fastmap pools gets the first take on free PEBs, the pools may leave no free PEBs to be selected as the new anchor, resulting in the two PEBs alternating behaviour. If the anchor PEBs gets a high erase count the PEBs will not be used by the pools but remain in ubi->free, even more increasing the likelihood they will be used as anchors. Getting stuck using only a couple of PEBs continuously will result in an uneven wear, eventually leading to failure. To fix this: - Choose the fastmap anchor when the most free PEBs are available. This is during rebuilding of the fastmap pools, after the unused pool PEBs are added to ubi->free but before the pools are populated again from the free PEBs. Also reserve an additional second best PEB as a candidate for the next time the fast map anchor is updated. If a better PEB is found the next time the fast map anchor is updated, the candidate is made available for building the pools. - Enable anchor move within the anchor area again as it is useful for distributing wear. - The anchor candidate for the next fastmap update is the most suited free PEB. Check this PEB's erase count during wear leveling. If the wear leveling limit is exceeded, the PEB is considered unsuitable for now. As all other non used anchor area PEBs should be even worse, free up the used anchor area PEB with the lowest erase count. Signed-off-by: Arne Edholm <arne.edholm@axis.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-06-02mm: remove the pgprot argument to __vmallocChristoph Hellwig1-2/+2
The pgprot argument to __vmalloc is always PAGE_KERNEL now, so remove it. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Michael Kelley <mikelley@microsoft.com> [hyperv] Acked-by: Gao Xiang <xiang@kernel.org> [erofs] Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Wei Liu <wei.liu@kernel.org> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Christophe Leroy <christophe.leroy@c-s.fr> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Cc: David Airlie <airlied@linux.ie> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Laura Abbott <labbott@redhat.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Nitin Gupta <ngupta@vflare.org> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Sakari Ailus <sakari.ailus@linux.intel.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Sumit Semwal <sumit.semwal@linaro.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Paul Mackerras <paulus@ozlabs.org> Cc: Vasily Gorbik <gor@linux.ibm.com> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200414131348.444715-22-hch@lst.de Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-01Merge tag 'nand/for-5.8' of ↵Richard Weinberger1-1/+4
git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux into mtd/next Raw NAND core changes: * Stop using nand_release(), patched all drivers. * Give more information about the ECC weakness when not matching the chip's requirement. * MAINTAINERS updates. * Support emulated SLC mode on MLC NANDs. * Support "constrained" controllers, adapt the core and ONFI/JEDEC table parsing and Micron's code. * Take check_only into account. * Add an invalid ECC mode to discriminate with valid ones. * Return an enum from of_get_nand_ecc_algo(). * Drop OOB_FIRST placement scheme. * Introduce nand_extract_bits(). * Ensure a consistent bitflips numbering. * BCH lib: - Allow easy bit swapping. - Rework a little bit the exported function names. * Fix nand_gpio_waitrdy(). * Propage CS selection to sub operations. * Add a NAND_NO_BBM_QUIRK flag. * Give the possibility to verify a read operation is supported. * Add a helper to check supported operations. * Avoid indirect access to ->data_buf(). * Rename the use_bufpoi variables. * Fix comments about the use of bufpoi. * Rename a NAND chip option. * Reorder the nand_chip->options flags. * Translate obscure bitfields into readable macros. * Timings: - Fix default values. - Add mode information to the timings structure. Raw NAND controller driver changes: * Fixed many error paths. * Arasan - New driver * Au1550nd: - Various cleanups - Migration to ->exec_op() * brcmnand: - Misc cleanup. - Support v2.1-v2.2 controllers. - Remove unused including <linux/version.h>. - Correctly verify erased pages. - Fix Hamming OOB layout. * Cadence - Make cadence_nand_attach_chip static. * Cafe: - Set the NAND_NO_BBM_QUIRK flag * cmx270: - Remove this controller driver. * cs553x: - Misc cleanup - Migration to ->exec_op() * Davinci: - Misc cleanup. - Migration to ->exec_op() * Denali: - Add more delays before latching incoming data * Diskonchip: - Misc cleanup - Migration to ->exec_op() * Fsmc: - Change to non-atomic bit operations. * GPMI: - Use nand_extract_bits() - Fix runtime PM imbalance. * Ingenic: - Migration to exec_op() - Fix the RB gpio active-high property on qi, lb60 - Make qi_lb60_ooblayout_ops static. * Marvell: - Misc cleanup and small fixes * Nandsim: - Fix the error paths, driver wide. * Omap_elm: - Fix runtime PM imbalance. * STM32_FMC2: - Misc cleanups (error cases, comments, timeout valus, cosmetic changes).
2020-05-18ubi: Fix seq_file usage in detailed_erase_block_info debugfs fileRichard Weinberger1-10/+2
3bfa7e141b0b ("fs/seq_file.c: seq_read(): add info message about buggy .next functions") showed that we don't use seq_file correctly. So make sure that our ->next function always updates the position. Fixes: 7bccd12d27b7 ("ubi: Add debugfs file for tracking PEB state") Signed-off-by: Richard Weinberger <richard@nod.at>
2020-05-11ubi: Relax the 'no MLC' rule and allow MLCs operating in SLC modeBoris Brezillon1-1/+4
The MTD layer provides an SLC mode (purely software emulation of SLC behavior) addressing the paired-pages corruption issue, which was the main reason for refusing attaching MLC NANDs to UBI. Relax this rule and allow partitions that have the MTD_EMULATE_SLC_ON_MLC flag set to be attached. Signed-off-by: Boris Brezillon <bbrezillon@kernel.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/linux-mtd/20200503155341.16712-9-miquel.raynal@bootlin.com
2020-04-07Merge tag 'for-linus-5.7-rc1' of ↵Linus Torvalds3-4/+16
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI and UBIFS updates from Richard Weinberger: - Fix for memory leaks around UBIFS orphan handling - Fix for memory leaks around UBI fastmap - Remove zero-length array from ubi-media.h - Fix for TNC lookup in UBIFS orphan code * tag 'for-linus-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: ubi: ubi-media.h: Replace zero-length array with flexible-array member ubifs: Fix out-of-bounds memory access caused by abnormal value of node_len ubi: fastmap: Only produce the initial anchor PEB when fastmap is used ubi: fastmap: Free unused fastmap anchor peb during detach ubifs: ubifs_add_orphan: Fix a memory leak bug ubifs: ubifs_jnl_write_inode: Fix a memory leak bug ubifs: Fix ubifs_tnc_lookup() usage in do_kill_orphans()
2020-03-31ubi: ubi-media.h: Replace zero-length array with flexible-array memberGustavo A. R. Silva1-1/+1
The current codebase makes use of the zero-length array language extension to the C90 standard, but the preferred mechanism to declare variable-length types such as these ones is a flexible array member[1][2], introduced in C99: struct foo { int stuff; struct boo array[]; }; By making use of the mechanism above, we will get a compiler warning in case the flexible array does not occur last in the structure, which will help us prevent some kind of undefined behavior bugs from being inadvertently introduced[3] to the codebase from now on. Also, notice that, dynamic memory allocations won't be affected by this change: "Flexible array members have incomplete type, and so the sizeof operator may not be applied. As a quirk of the original implementation of zero-length arrays, sizeof evaluates to zero."[1] This issue was found with the help of Coccinelle. [1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html [2] https://github.com/KSPP/linux/issues/21 [3] commit 76497732932f ("cxgb3/l2t: Fix undefined behaviour") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-03-31ubi: fastmap: Only produce the initial anchor PEB when fastmap is usedHou Tao1-1/+2
Don't produce the initial anchor PEB when ubi device is read-only or fastmap is disabled, else the resulting PEB will be unusable to any volume. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-03-31ubi: fastmap: Free unused fastmap anchor peb during detachHou Tao1-2/+13
When CONFIG_MTD_UBI_FASTMAP is enabled, fm_anchor will be assigned a free PEB during ubi_wl_init() or ubi_update_fastmap(). However if fastmap is not used or disabled on the MTD device, ubi_wl_entry related with the PEB will not be freed during detach. So Fix it by freeing the unused fastmap anchor during detach. Fixes: f9c34bb52997 ("ubi: Fix producing anchor PEBs") Reported-by: syzbot+f317896aae32eb281a58@syzkaller.appspotmail.com Reviewed-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-03-30mtd: Convert fallthrough comments into statementsMiquel Raynal2-3/+3
Use Joe Perches cvt_fallthrough.pl script to convert /* fallthrough */ comments (and its derivatives) into a fallthrough; statement. This automatically drops useless ones. Do it MTD-wide. Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> Acked-by: Vignesh Raghavendra <vigneshr@ti.com> Acked-by: Tudor Ambarus <tudor.ambarus@microchip.com> Acked-by: Richard Weinberger <richard@nod.at> Link: https://lore.kernel.org/linux-mtd/20200325212115.14170-1-miquel.raynal@bootlin.com
2020-02-04treewide: remove redundant IS_ERR() before error code checkMasahiro Yamada1-1/+1
'PTR_ERR(p) == -E*' is a stronger condition than IS_ERR(p). Hence, IS_ERR(p) is unneeded. The semantic patch that generates this commit is as follows: // <smpl> @@ expression ptr; constant error_code; @@ -IS_ERR(ptr) && (PTR_ERR(ptr) == - error_code) +PTR_ERR(ptr) == - error_code // </smpl> Link: http://lkml.kernel.org/r/20200106045833.1725-1-masahiroy@kernel.org Signed-off-by: Masahiro Yamada <masahiroy@kernel.org> Cc: Julia Lawall <julia.lawall@lip6.fr> Acked-by: Stephen Boyd <sboyd@kernel.org> [drivers/clk/clk.c] Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> [GPIO] Acked-by: Wolfram Sang <wsa@the-dreams.de> [drivers/i2c] Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> [acpi/scan.c] Acked-by: Rob Herring <robh@kernel.org> Cc: Eric Biggers <ebiggers@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-01-20ubi: Fix an error pointer dereference in error handling codeDan Carpenter1-9/+12
If "seen_pebs = init_seen(ubi);" fails then "seen_pebs" is an error pointer and we try to kfree() it which results in an Oops. This patch re-arranges the error handling so now it only frees things which have been allocated successfully. Fixes: daef3dd1f0ae ("UBI: Fastmap: Add self check to detect absent PEBs") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-17ubi: Free the normal volumes in error paths of ubi_attach_mtd_dev()Hou Tao4-14/+30
The allocated normal volumes saved in ubi->volumes are not freed in the error paths in ubi_attach_mtd_dev() and its callees (e.g. ubi_attach() and ubi_read_volume_table()). These normal volumes should be freed through kill_volumes() and vol_release(), but ubi_attach_mtd_dev() may fail before calling uif_init(), and there will be memory leaks. So adding a new helper ubi_free_all_volumes() to free the normal and the internal volumes. And in order to prevent double-free of volume, reset ubi->volumes[i] to NULL after freeing. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-17ubi: Check the presence of volume before call ubi_fastmap_destroy_checkmap()Hou Tao1-0/+2
Else there may be oops when fastmap is enabled and init_volumes() fails. Signed-off-by: Hou Tao <houtao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-17ubi: wl: Remove set but not used variable 'prev_e'YueHaibing1-2/+1
Fixes gcc '-Wunused-but-set-variable' warning: drivers/mtd/ubi/wl.c: In function 'find_wl_entry': drivers/mtd/ubi/wl.c:322:27: warning: variable 'prev_e' set but not used [-Wunused-but-set-variable] It's not used any more now, so remove it. Fixes: f9c34bb52997 ("ubi: Fix producing anchor PEBs") Signed-off-by: YueHaibing <yuehaibing@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2020-01-17ubi: fastmap: Fix inverted logic in seen selfcheckSascha Hauer1-1/+1
set_seen() sets the bit corresponding to the PEB number in the bitmap, so when self_check_seen() wants to find PEBs that haven't been seen we have to print the PEBs that have their bit cleared, not the ones which have it set. Fixes: 5d71afb00840 ("ubi: Use bitmaps in Fastmap self-check code") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-12-03Merge tag 'upstream-5.5-rc1' of ↵Linus Torvalds6-44/+43
git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs Pull UBI/UBIFS/JFFS2 updates from Richard Weinberger: "This pull request contains mostly fixes for UBI, UBIFS and JFFS2: UBI: - Fix a regression around producing a anchor PEB for fastmap. Due to a change in our locking fastmap was unable to produce fresh anchors an re-used the existing one a way to often. UBIFS: - Fixes for endianness. A few places blindly assumed little endian. - Fix for a memory leak in the orphan code. - Fix for a possible crash during a commit. - Revert a wrong bugfix. JFFS2: - Revert a bad bugfix (false positive from a code checking tool)" * tag 'upstream-5.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/ubifs: Revert "jffs2: Fix possible null-pointer dereferences in jffs2_add_frag_to_fragtree()" ubi: Fix producing anchor PEBs ubifs: ubifs_tnc_start_commit: Fix OOB in layout_in_gaps ubifs: do_kill_orphans: Fix a memory leak bug Revert "ubifs: Fix memory leak bug in alloc_ubifs_info() error path" ubifs: Fix type of sup->hash_algo ubifs: Fixed missed le64_to_cpu() in journal ubifs: Force prandom result to __le32 ubifs: Remove obsolete TODO from dfs_file_write() ubi: Fix warning static is not at beginning of declaration ubi: Print skip_check in ubi_dump_vol_info()
2019-12-02Merge tag 'compat-ioctl-5.5' of ↵Linus Torvalds1-33/+3
git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground Pull removal of most of fs/compat_ioctl.c from Arnd Bergmann: "As part of the cleanup of some remaining y2038 issues, I came to fs/compat_ioctl.c, which still has a couple of commands that need support for time64_t. In completely unrelated work, I spent time on cleaning up parts of this file in the past, moving things out into drivers instead. After Al Viro reviewed an earlier version of this series and did a lot more of that cleanup, I decided to try to completely eliminate the rest of it and move it all into drivers. This series incorporates some of Al's work and many patches of my own, but in the end stops short of actually removing the last part, which is the scsi ioctl handlers. I have patches for those as well, but they need more testing or possibly a rewrite" * tag 'compat-ioctl-5.5' of git://git.kernel.org:/pub/scm/linux/kernel/git/arnd/playground: (42 commits) scsi: sd: enable compat ioctls for sed-opal pktcdvd: add compat_ioctl handler compat_ioctl: move SG_GET_REQUEST_TABLE handling compat_ioctl: ppp: move simple commands into ppp_generic.c compat_ioctl: handle PPPIOCGIDLE for 64-bit time_t compat_ioctl: move PPPIOCSCOMPRESS to ppp_generic compat_ioctl: unify copy-in of ppp filters tty: handle compat PPP ioctls compat_ioctl: move SIOCOUTQ out of compat_ioctl.c compat_ioctl: handle SIOCOUTQNSD af_unix: add compat_ioctl support compat_ioctl: reimplement SG_IO handling compat_ioctl: move WDIOC handling into wdt drivers fs: compat_ioctl: move FITRIM emulation into file systems gfs2: add compat_ioctl support compat_ioctl: remove unused convert_in_user macro compat_ioctl: remove last RAID handling code compat_ioctl: remove /dev/raw ioctl translation compat_ioctl: remove PCI ioctl translation compat_ioctl: remove joystick ioctl translation ...
2019-11-18ubi: Fix producing anchor PEBsSascha Hauer5-43/+41
When a new fastmap is about to be written UBI must make sure it has a free block for a fastmap anchor available. For this ubi_update_fastmap() calls ubi_ensure_anchor_pebs(). This stopped working with 2e8f08deabbc ("ubi: Fix races around ubi_refill_pools()"), with this commit the wear leveling code is blocked and can no longer produce free PEBs. UBI then more often than not falls back to write the new fastmap anchor to the same block it was already on which means the same erase block gets erased during each fastmap write and wears out quite fast. As the locking prevents us from producing the anchor PEB when we actually need it, this patch changes the strategy for creating the anchor PEB. We no longer create it on demand right before we want to write a fastmap, but instead we create an anchor PEB right after we have written a fastmap. This gives us enough time to produce a new anchor PEB before it is needed. To make sure we have an anchor PEB for the very first fastmap write we call ubi_ensure_anchor_pebs() during initialisation as well. Fixes: 2e8f08deabbc ("ubi: Fix races around ubi_refill_pools()") Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-11-18ubi: Fix warning static is not at beginning of declarationRishi Gupta1-1/+1
Compiler generates following warning when kernel is built with W=1: drivers/mtd/ubi/ubi.h:971:1: warning: ‘static’ is not at beginning of declaration [-Wold-style-declaration] This commit fixes this by correctly ordering keywords. Signed-off-by: Rishi Gupta <gupt21@gmail.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-11-17ubi: Print skip_check in ubi_dump_vol_info()Stefan Roese1-0/+1
It might be interesting, if "skip_check" is set or not, so lets print this flag in ubi_dump_vol_info() as well. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Richard Weinberger <richard@nod.at> Cc: Boris Brezillon <boris.brezillon@collabora.com> Cc: Heiko Schocher <hs@denx.de> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-11-14mtd: no need to check return value of debugfs_create functionsGreg Kroah-Hartman1-88/+43
When calling debugfs functions, there is no need to ever check the return value. The function can work or not, but the code logic should never do something different based on this. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Brian Norris <computersforpeace@gmail.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Miquel Raynal <miquel.raynal@bootlin.com> Cc: Richard Weinberger <richard@nod.at> Cc: Vignesh Raghavendra <vigneshr@ti.com> Cc: Artem Bityutskiy <dedekind1@gmail.com> Cc: linux-mtd@lists.infradead.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
2019-10-23compat_ioctl: move drivers to compat_ptr_ioctlArnd Bergmann1-33/+3
Each of these drivers has a copy of the same trivial helper function to convert the pointer argument and then call the native ioctl handler. We now have a generic implementation of that, so use it. Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jason Gunthorpe <jgg@mellanox.com> Reviewed-by: Jiri Kosina <jkosina@suse.cz> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2019-09-15ubi: block: Warn if volume size is not multiple of 512Richard Weinberger1-8/+35
If volume size is not a multiple of 512, ubi block cuts off the last bytes of an volume since the block layer works on 512 byte sectors. This can happen especially on NOR flash with minimal io size of 1. To avoid unpleasant surprises, print a warning. Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15ubi: ubi_wl_get_peb: Increase the number of attempts while getting PEBZhihao Cheng1-3/+3
Running stress test io_paral (A pressure ubi test in mtd-utils) on an UBI device with fewer PEBs (fastmap enabled) may cause ENOSPC errors and make UBI device read-only, but there are still free PEBs on the UBI device. This problem can be easily reproduced by performing the following steps on a 2-core machine: $ modprobe nandsim first_id_byte=0x20 second_id_byte=0x33 parts=80 $ modprobe ubi mtd="0,0" fm_autoconvert $ ./io_paral /dev/ubi0 We may see the following verbose: (output) [io_paral] update_volume():108: failed to write 380 bytes at offset 95920 of volume 2 [io_paral] update_volume():109: update: 97088 bytes [io_paral] write_thread():227: function pwrite() failed with error 28 (No space left on device) [io_paral] write_thread():229: cannot write 15872 bytes to offs 31744, wrote -1 (dmesg) ubi0 error: ubi_wl_get_peb [ubi]: Unable to get a free PEB from user WL pool ubi0 warning: ubi_eba_write_leb [ubi]: switch to read-only mode CPU: 0 PID: 2027 Comm: io_paral Not tainted 5.3.0-rc2-00001-g5986cd0 #9 ubi0 warning: try_write_vid_and_data [ubi]: failed to write VID header to LEB 2:5, PEB 18 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0 -0-ga698c8995f-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x85/0xba ubi_eba_write_leb+0xa1e/0xa40 [ubi] vol_cdev_write+0x307/0x520 [ubi] vfs_write+0xfa/0x280 ksys_pwrite64+0xc5/0xe0 __x64_sys_pwrite64+0x22/0x30 do_syscall_64+0xbf/0x440 In function ubi_wl_get_peb, the operation of filling the pool (ubi_update_fastmap) with free PEBs and fetching a free PEB from the pool is not atomic. After thread A filling the pool with free PEB, free PEB may be taken away by thread B. When thread A checks the expression again, the condition is still unsatisfactory. At this time, there may still be free PEBs on UBI that can be filled into the pool. This patch increases the number of attempts to obtain PEB. An extreme case (No free PEBs left after creating test volumes) has been tested on different type of machines for 100 times. The biggest number of attempts are shown below: x86_64 arm64 2-core 4 4 4-core 8 4 8-core 4 4 Signed-off-by: Zhihao Cheng <chengzhihao1@huawei.com> Signed-off-by: Richard Weinberger <richard@nod.at>
2019-09-15ubi: Don't do anchor move within fastmap areaRichard Weinberger1-0/+6
To make sure that Fastmap can use a PEB within the first 64 PEBs, UBI moves blocks away from that area. It uses regular wear-leveling for that job. An anchor move can be triggered if no PEB is free in this area or because of anticipation. In the latter case it can happen that UBI decides to move a block but finds a free PEB within the same area. This case is in vain an increases only erase counters. Catch this case and cancel wear-leveling if this happens. Signed-off-by: Richard Weinberger <richard@nod.at>
2019-06-05treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 286Thomas Gleixner3-29/+3
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation version 2 this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 97 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Alexios Zavras <alexios.zavras@intel.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190529141901.025053186@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 156Thomas Gleixner15-210/+15
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version this program is distributed in the hope that it will be useful but without any warranty without even the implied warranty of merchantability or fitness for a particular purpose see the gnu general public license for more details you should have received a copy of the gnu general public license along with this program if not write to the free software foundation inc 59 temple place suite 330 boston ma 02111 1307 usa extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 1334 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Reviewed-by: Richard Fontana <rfontana@redhat.com> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070033.113240726@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-21treewide: Add SPDX license identifier - Makefile/KconfigThomas Gleixner1-0/+1
Add SPDX license identifiers to all Make/Kconfig files which: - Have no license information of any form These files fall under the project license, GPL v2 only. The resulting SPDX license identifier is: GPL-2.0-only Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-05-07ubi: wl: Fix uninitialized variableGustavo A. R. Silva1-1/+1
There is a potential execution path in which variable *err* is compared against UBI_IO_BITFLIPS without being properly initialized previously. Fix this by initializing variable *err* to 0. Addresses-Coverity-ID: 1477298 "(Uninitialized scalar variable") Fixes: 663586c0a892 ("ubi: Expose the bitrot interface") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Richard Weinberger <richard@nod.at>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-25 13:12:35 +0300