summaryrefslogtreecommitdiff
path: root/drivers/mmc
AgeCommit message (Collapse)AuthorFilesLines
2015-06-01mmc: mmc: Hold re-tuning in mmc_sleep()Adrian Hunter1-2/+8
The sleep command is issued after deselecting the card, but re-tuning won't work on a deselected card so re-tuning must be held. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: core: Hold re-tuning while bkops ongoingAdrian Hunter1-0/+6
Hold re-tuning during bkops to prevent it from conflicting with the busy state. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: core: Hold re-tuning during erase commandsAdrian Hunter1-0/+3
Hold re-tuning during erase commands to prevent it from conflicting with the sequence of commands. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: core: Hold re-tuning during switch commandsAdrian Hunter1-10/+20
Hold re-tuning during switch commands to prevent it from conflicting with the busy state or the CMD13 verification. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: core: Add support for re-tuning before each requestAdrian Hunter1-7/+28
At the start of each request, re-tune if needed and then hold off re-tuning again until the request is done. Note that though there is one function that starts requests (mmc_start_request) there are two that wait for the request to be done (mmc_wait_for_req_done and mmc_wait_for_data_req_done). Also note that mmc_wait_for_data_req_done can return even when the request is not done (which allows the block driver to prepare a newly arrived request while still waiting for the previous request). This patch ensures re-tuning is held for the duration of a request. Subsequent patches will also hold re-tuning at other times when it might cause a conflict. In addition, possibly a command is failing because re-tuning is needed. Use mmc_retune_recheck() to check re-tuning. At that point re-tuning is held, at least by the request, so mmc_retune_recheck() flags host->retune_now if the hold count is 1. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: core: Enable / disable re-tuningAdrian Hunter2-1/+9
Enable re-tuning when tuning is executed and disable re-tuning when card is no longer initialized. In the case of SDIO suspend, the card can keep power. In that case, re-tuning need not be disabled, but, if a re-tuning timer is being used, ensure it is disabled and assume that re-tuning will be needed upon resume since it is not known how long the suspend will last. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: host: Add facility to support re-tuningAdrian Hunter2-0/+74
Currently, there is core support for tuning during initialization. There can also be a need to re-tune periodically (e.g. sdhci) or to re-tune after the host controller is powered off (e.g. after PM runtime suspend / resume) or to re-tune in response to CRC errors. The main requirements for re-tuning are: - ability to enable / disable re-tuning - ability to flag that re-tuning is needed - ability to re-tune before any request - ability to hold off re-tuning if the card is busy - ability to hold off re-tuning if re-tuning is in progress - ability to run a re-tuning timer To support those requirements 7 members are added to struct mmc_host: unsigned int can_retune:1; /* re-tuning can be used */ unsigned int doing_retune:1; /* re-tuning in progress */ unsigned int retune_now:1; /* do re-tuning at next req */ int need_retune; /* re-tuning is needed */ int hold_retune; /* hold off re-tuning */ unsigned int retune_period; /* re-tuning period in secs */ struct timer_list retune_timer; /* for periodic re-tuning */ need_retune is an integer so it can be set without needing synchronization. hold_retune is a integer to allow nesting. Various simple functions are provided to set / clear those variables. Subsequent patches take those functions into use. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: sdhci-{pxav2,pxav3}: Use of_match_ptr() macroAxel Lin2-6/+2
This eliminates having an #ifdef returning NULL for the case when OF is disabled. Signed-off-by: Axel Lin <axel.lin@ingics.com> Acked-by: Jisheng Zhang <jszhang@marvell.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: sdhci-of-arasan: Add the support for sdhci-arasan4.9aSuman Tripathi1-0/+7
This patch adds the quirks and compatible string in sdhci-of-arasan.c to support sdhci-arasan4.9a version of controller. Signed-off-by: Suman Tripathi <stripathi@apm.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: sdhci-s3c: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: sdhci-imx: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: s3cmci: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: rtsx: Constify platform_device_idKrzysztof Kozlowski2-2/+2
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: mxs: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: davinci: Constify platform_device_idKrzysztof Kozlowski1-1/+1
The platform_device_id is not modified by the driver and core uses it as const. Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: sdhci-sirf: fake version and capbility registersWeijun Yang2-0/+36
chips have some issues for version and capbility registers, here we fake them. Signed-off-by: Weijun Yang <Weijun.Yang@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: sdhci-sirf: fix the tuning count in platform_execute_tuningWeijun Yang1-4/+5
hardware has 16bit to record the tuning count, so fix it to 16384. at the same time, tuned_phases[SIRF_TUNING_COUNT] is useless as the array is never used, so move it to a variant. Signed-off-by: Weijun Yang <Weijun.Yang@csr.com> Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: TMIO: Use devm_request_irq()Ian Molton1-2/+2
Clean up resource allocation and freeing. Signed-off-by: Ian Molton <ian.molton@codethink.co.uk> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: TMIO: Fix I/O mapping leak on error using devm_ioremap()Ian Molton1-3/+2
Signed-off-by: Ian Molton <ian.molton@codethink.co.uk> [bwh: Forward-ported to 4.0] Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: TMIO: Ensure MFD cell is disabled on probe error pathIan Molton1-2/+4
Signed-off-by: Ian Molton <ian.molton@codethink.co.uk> Signed-off-by: Ben Hutchings <ben.hutchings@codethink.co.uk> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: sdhci_f_sdh30: Fix the size passed to sdhci_alloc_hostAxel Lin1-2/+1
sdhci_alloc_host() takes priv_size rather than sizeof(struct sdhci_host) + priv_size. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: sdhci_f_sdh30: Staticize local functionsAxel Lin1-3/+3
Make local functions static. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-06-01mmc: sdhci-of-esdhc: Pre divider starts at 1Joakim Tjernlund1-2/+2
For PowerPC esdhc pre divider starts at 1, fixing the increases the actual clock from 40KHz to 50 KHz. Signed-off-by: Joakim Tjernlund <joakim.tjernlund@transmode.se> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-25mmc: host: sdhci-esdhc-imx: fix broken email addressWolfram Sang1-2/+2
My Pengutronix address is not valid anymore, redirect people to the Pengutronix kernel team. Reported-by: Harald Geyer <harald@ccbib.org> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Acked-by: Robert Schwebel <r.schwebel@pengutronix.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-25mmc: sh_mmcif: separate sh_mmcif_clk_update() into setup and prepareKuninori Morimoto1-12/+10
Current sh_mmcif_clk_update() is called from probe() and set_ios(), but, the purpose of later one is just clk_prepare_enable(). No need to setup mmc->f_max/f_min in many times. This patch separe sh_mmcif_clk_update() into clk_prepare_enable() and mmc->f_max/f_min setup. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-25mmc: sh_mmcif: remove unnecessary int clk from struct sh_mmcif_hostKuninori Morimoto1-17/+18
struct sh_mmcif_host has 1) int clk, 2) struct clock *hclk, and host->clk = clk_get_rate(host->hclk). This int clk is not necessary. Let's remove it. And, current hclk is confusable naming. Let's rename it to clk. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-25mmc: sh_mmcif: cleanup to use dev instead of &pdev->devKuninori Morimoto1-16/+17
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-25mmc: sh_mmcif: move mmcif_of_match to upsideKuninori Morimoto1-6/+6
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com> Acked-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-25mmc: sdio: add reset callback to bus operationsAndreas Fenkart1-0/+7
Some drivers schedule automatic hw resets. An example is mwifiex, which schedules a card reset if the command handler between driver and card firmware becomes out of sync Signed-off-by: Andreas Fenkart <afenkart@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-18mmc: atmel-mci: fix bad variable type for clkdivLudovic Desroches1-2/+7
clkdiv is declared as an u32 but it can be set to a negative value causing a huge divisor value. Change its type to int to avoid this case. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Cc: <stable@vger.kernel.org> # 3.4 and later Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-08mmc: dw_mmc: dw_mci_get_cd check MMC_CAP_NONREMOVABLEZhangfei Gao1-1/+2
When non-removable is used for emmc, MMC_CAP_NONREMOVABLE should also be checked, otherwise detection fail since present=0 Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-08mmc: dw_mmc: init desc in dw_mci_idmac_initZhangfei Gao1-1/+3
Set 0 to des1 in 32bit case. Otherwise the random value of des1 will be used in dw_mci_translate_sglist: IDMAC_SET_BUFFER1_SIZE(desc, length) Signed-off-by: Fei Wang <w.f@huawei.com> Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org> Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-06mmc: card: Don't access RPMB partitions for normal read/writeChuanxiao Dong3-1/+15
During kernel boot, it will try to read some logical sectors of each block device node for the possible partition table. But since RPMB partition is special and can not be accessed by normal eMMC read / write CMDs, it will cause below error messages during kernel boot: ... mmc0: Got data interrupt 0x00000002 even though no data operation was in progress. mmcblk0rpmb: error -110 transferring data, sector 0, nr 32, cmd response 0x900, card status 0xb00 mmcblk0rpmb: retrying using single block read mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900 end_request: I/O error, dev mmcblk0rpmb, sector 0 Buffer I/O error on device mmcblk0rpmb, logical block 0 end_request: I/O error, dev mmcblk0rpmb, sector 8 Buffer I/O error on device mmcblk0rpmb, logical block 1 end_request: I/O error, dev mmcblk0rpmb, sector 16 Buffer I/O error on device mmcblk0rpmb, logical block 2 end_request: I/O error, dev mmcblk0rpmb, sector 24 Buffer I/O error on device mmcblk0rpmb, logical block 3 ... This patch will discard the access request in eMMC queue if it is RPMB partition access request. By this way, it avoids trigger above error messages. Fixes: 090d25fe224c ("mmc: core: Expose access to RPMB partition") Signed-off-by: Yunpeng Gao <yunpeng.gao@intel.com> Signed-off-by: Chuanxiao Dong <chuanxiao.dong@intel.com> Tested-by: Michael Shigorin <mike@altlinux.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-06mmc: sh_mmcif: Fix timeout value for command requestTakeshi Kihara1-1/+1
f9fd54f22e ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") changed the timeout value from 1000 jiffies to 1s. In the case where HZ is 1000 the values are the same. However, for smaller HZ values the timeout is now smaller, 1s instead of 10s in the case of HZ=100. Since the timeout occurs in spite of a normal data transfer a timeout of 10s seems more appropriate. This restores the previous timeout in the case where HZ=100 and results in an increase over the previous timeout for larger values of HZ. Fixes: f9fd54f22e ("mmc: sh_mmcif: Use msecs_to_jiffies() for host->timeout") Signed-off-by: Takeshi Kihara <takeshi.kihara.df@renesas.com> [horms: rewrote changelog to refer to HZ] Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Yoshihiro Kaneko <ykaneko0929@gmail.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-05-04mmc: core: add missing pm event in mmc_pm_notify to fix hib restoreGrygorii Strashko1-0/+1
The PM_RESTORE_PREPARE is not handled now in mmc_pm_notify(), as result mmc_rescan() could be scheduled and executed at late hibernation restore stages when MMC device is suspended already - which, in turn, will lead to system crash on TI dra7-evm board: WARNING: CPU: 0 PID: 3188 at drivers/bus/omap_l3_noc.c:148 l3_interrupt_handler+0x258/0x374() 44000000.ocp:L3 Custom Error: MASTER MPU TARGET L4_PER1_P3 (Idle): Data Access in User mode during Functional access Hence, add missed PM_RESTORE_PREPARE PM event in mmc_pm_notify(). Fixes: 4c2ef25fe0b8 (mmc: fix all hangs related to mmc/sd card...) Signed-off-by: Grygorii Strashko <Grygorii.Strashko@linaro.org> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-24Merge branch 'for-linus' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds4-40/+13
Pull slave-dmaengine updates from Vinod Koul: - new drivers for: - Ingenic JZ4780 controller - APM X-Gene controller - Freescale RaidEngine device - Renesas USB Controller - remove device_alloc_chan_resources dummy handlers - sh driver cleanups for peri peri and related emmc and asoc patches as well - fixes and enhancements spread over the drivers * 'for-linus' of git://git.infradead.org/users/vkoul/slave-dma: (59 commits) dmaengine: dw: don't prompt for DW_DMAC_CORE dmaengine: shdmac: avoid unused variable warnings dmaengine: fix platform_no_drv_owner.cocci warnings dmaengine: pch_dma: fix memory leak on failure path in pch_dma_probe() dmaengine: at_xdmac: unlock spin lock before return dmaengine: xgene: devm_ioremap() returns NULL on error dmaengine: xgene: buffer overflow in xgene_dma_init_channels() dmaengine: usb-dmac: Fix dereferencing freed memory 'desc' dmaengine: sa11x0: report slave capabilities to upper layers dmaengine: vdma: Fix compilation warnings dmaengine: fsl_raid: statify fsl_re_chan_probe dmaengine: Driver support for FSL RaidEngine device. dmaengine: xgene_dma_init_ring_mngr() can be static Documentation: dma: Add documentation for the APM X-Gene SoC DMA device DTS binding arm64: dts: Add APM X-Gene SoC DMA device and DMA clock DTS nodes dmaengine: Add support for APM X-Gene SoC DMA engine driver dmaengine: usb-dmac: Add Renesas USB DMA Controller (USB-DMAC) driver dmaengine: renesas,usb-dmac: Add device tree bindings documentation dmaengine: edma: fixed wrongly initialized data parameter to the edma callback dmaengine: ste_dma40: fix implicit conversion ...
2015-04-22Merge tag 'mmc-4.1-rc1' of git://git.linaro.org/people/ulf.hansson/mmcLinus Torvalds4-37/+58
Pull MMC fixes from Ulf Hansson: "Here is two mmc core fixes for v.4.1 rc1: - fix error code propagation in mmc_pwrseq_simple_alloc() - revert 'mmc: core: Convert mmc_driver to device_driver'" * tag 'mmc-4.1-rc1' of git://git.linaro.org/people/ulf.hansson/mmc: Revert "mmc: core: Convert mmc_driver to device_driver" mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc()
2015-04-22Merge tag 'armsoc-cleanup' of ↵Linus Torvalds4-1739/+0
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC cleanups from Olof Johansson: "We've got a fairly large cleanup branch this time. The bulk of this is removal of non-DT platforms of several flavors: - Atmel at91 platforms go full-DT, with removal of remaining board-file based support - OMAP removes legacy board files for three more platforms - removal of non-DT mach-msm, newer Qualcomm platforms now live in mach-qcom - Freescale i.MX25 also removes non-DT platform support" Most of the rest of the changes here are fallout from the above, i.e. for example removal of drivers that now lack platforms, etc. * tag 'armsoc-cleanup' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (58 commits) mmc: Remove msm_sdcc driver gpio: Remove gpio-msm-v1 driver ARM: Remove mach-msm and associated ARM architecture code ARM: shmobile: cpuidle: Remove the pointless default driver ARM: davinci: dm646x: Add interrupt resource for McASPs ARM: davinci: irqs: Correct McASP1 TX interrupt definition for DM646x ARM: davinci: dm646x: Clean up the McASP DMA resources ARM: davinci: devices-da8xx: Add support for McASP2 on da830 ARM: davinci: devices-da8xx: Clean up and correct the McASP device creation ARM: davinci: devices-da8xx: Add interrupt resource to McASP structs ARM: davinci: devices-da8xx: Add resource name for the McASP DMA request ARM: OMAP2+: Remove legacy support for omap3 TouchBook ARM: OMAP3: Remove legacy support for devkit8000 ARM: OMAP3: Remove legacy support for EMA-Tech Stalker board ARM: shmobile: Consolidate the pm code for R-Car Gen2 ARM: shmobile: r8a7791: Correct SYSCIER value ARM: shmobile: r8a7790: Correct SYSCIER value ARM: at91: remove old setup ARM: at91: sama5d4: remove useless map_io ARM: at91: sama5 use SoC detection infrastructure ...
2015-04-17Revert "mmc: core: Convert mmc_driver to device_driver"Ulf Hansson3-36/+57
This reverts commit 6685ac62b2f0 ("mmc: core: Convert mmc_driver to device_driver") The reverted commit went too far in simplifing the device driver parts for mmc. Let's restore the old mmc_driver to enable driver core to sooner or later to remove the ->probe(), ->remove() and ->shutdown() callbacks from the struct device_driver. Note that, the old ->suspend|resume() callbacks in the struct mmc_driver don't need to be restored, since the mmc block layer has converted to the modern system PM ops. Fixes: 6685ac62b2f0 ("mmc: core: Convert mmc_driver to device_driver") Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com>
2015-04-17mmc: pwrseq: Fix error code propagation in mmc_pwrseq_simple_alloc()Javier Martinez Canillas1-1/+1
If the struct mmc_pwrseq_match .alloc function used to allocate a struct mmc_pwrseq fails, the error is propagated to mmc_of_parse(). But instead of returning the error code in pwrseq, host->pwrseq is returned which will always be 0. So mmc_of_parse() succeeds even if the pwrseq .alloc function failed and host->pwrseq is NULL. This makes the SDIO device to not be powered if the power sequencing .alloc functions wants to be deferred due a missing resource because the mmc controller driver probe did wrongly succeed. Fixes: 0f12a0ce4ce4a ("mmc: pwrseq: simplify alloc/free hooks") Signed-off-by: Javier Martinez Canillas <javier.martinez@collabora.co.uk> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-17Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds1-2/+2
Pull SCSI updates from James Bottomley: "This is the usual grab bag of driver updates (lpfc, qla2xxx, storvsc, aacraid, ipr) plus an assortment of minor updates. There's also a major update to aic1542 which moves the driver into this millenium" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (106 commits) change SCSI Maintainer email sd, mmc, virtio_blk, string_helpers: fix block size units ufs: add support to allow non standard behaviours (quirks) ufs-qcom: save controller revision info in internal structure qla2xxx: Update driver version to 8.07.00.18-k qla2xxx: Restore physical port WWPN only, when port down detected for FA-WWPN port. qla2xxx: Fix virtual port configuration, when switch port is disabled/enabled. qla2xxx: Prevent multiple firmware dump collection for ISP27XX. qla2xxx: Disable Interrupt handshake for ISP27XX. qla2xxx: Add debugging info for MBX timeout. qla2xxx: Add serdes read/write support for ISP27XX qla2xxx: Add udev notification to save fw dump for ISP27XX qla2xxx: Add message for sucessful FW dump collected for ISP27XX. qla2xxx: Add support to load firmware from file for ISP 26XX/27XX. qla2xxx: Fix beacon blink for ISP27XX. qla2xxx: Increase the wait time for firmware to be ready for P3P. qla2xxx: Fix crash due to wrong casting of reg for ISP27XX. qla2xxx: Fix warnings reported by static checker. lpfc: Update version to 10.5.0.0 for upstream patch set lpfc: Update copyright to 2015 ...
2015-04-16Merge tag 'powerpc-4.1-1' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux Pull powerpc updates from Michael Ellerman: - Numerous minor fixes, cleanups etc. - More EEH work from Gavin to remove its dependency on device_nodes. - Memory hotplug implemented entirely in the kernel from Nathan Fontenot. - Removal of redundant CONFIG_PPC_OF by Kevin Hao. - Rewrite of VPHN parsing logic & tests from Greg Kurz. - A fix from Nish Aravamudan to reduce memory usage by clamping nodes_possible_map. - Support for pstore on powernv from Hari Bathini. - Removal of old powerpc specific byte swap routines by David Gibson. - Fix from Vasant Hegde to prevent the flash driver telling you it was flashing your firmware when it wasn't. - Patch from Ben Herrenschmidt to add an OPAL heartbeat driver. - Fix for an oops causing get/put_cpu_var() imbalance in perf by Jan Stancek. - Some fixes for migration from Tyrel Datwyler. - A new syscall to switch the cpu endian by Michael Ellerman. - Large series from Wei Yang to implement SRIOV, reviewed and acked by Bjorn. - A fix for the OPAL sensor driver from Cédric Le Goater. - Fixes to get STRICT_MM_TYPECHECKS building again by Michael Ellerman. - Large series from Daniel Axtens to make our PCI hooks per PHB rather than per machine. - Small patch from Sam Bobroff to explicitly abort non-suspended transactions on syscalls, plus a test to exercise it. - Numerous reworks and fixes for the 24x7 PMU from Sukadev Bhattiprolu. - Small patch to enable the hard lockup detector from Anton Blanchard. - Fix from Dave Olson for missing L2 cache information on some CPUs. - Some fixes from Michael Ellerman to get Cell machines booting again. - Freescale updates from Scott: Highlights include BMan device tree nodes, an MSI erratum workaround, a couple minor performance improvements, config updates, and misc fixes/cleanup. * tag 'powerpc-4.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mpe/linux: (196 commits) powerpc/powermac: Fix build error seen with powermac smp builds powerpc/pseries: Fix compile of memory hotplug without CONFIG_MEMORY_HOTREMOVE powerpc: Remove PPC32 code from pseries specific find_and_init_phbs() powerpc/cell: Fix iommu breakage caused by controller_ops change powerpc/eeh: Fix crash in eeh_add_device_early() on Cell powerpc/perf: Cap 64bit userspace backtraces to PERF_MAX_STACK_DEPTH powerpc/perf/hv-24x7: Fail 24x7 initcall if create_events_from_catalog() fails powerpc/pseries: Correct memory hotplug locking powerpc: Fix missing L2 cache size in /sys/devices/system/cpu powerpc: Add ppc64 hard lockup detector support oprofile: Disable oprofile NMI timer on ppc64 powerpc/perf/hv-24x7: Add missing put_cpu_var() powerpc/perf/hv-24x7: Break up single_24x7_request powerpc/perf/hv-24x7: Define update_event_count() powerpc/perf/hv-24x7: Whitespace cleanup powerpc/perf/hv-24x7: Define add_event_to_24x7_request() powerpc/perf/hv-24x7: Rename hv_24x7_event_update powerpc/perf/hv-24x7: Move debug prints to separate function powerpc/perf/hv-24x7: Drop event_24x7_request() powerpc/perf/hv-24x7: Use pr_devel() to log message ... Conflicts: tools/testing/selftests/powerpc/Makefile tools/testing/selftests/powerpc/tm/Makefile
2015-04-14Merge branch 'for-linus' of ↵Linus Torvalds2-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Usual trivial tree updates. Nothing outstanding -- mostly printk() and comment fixes and unused identifier removals" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: goldfish: goldfish_tty_probe() is not using 'i' any more powerpc: Fix comment in smu.h qla2xxx: Fix printks in ql_log message lib: correct link to the original source for div64_u64 si2168, tda10071, m88ds3103: Fix firmware wording usb: storage: Fix printk in isd200_log_config() qla2xxx: Fix printk in qla25xx_setup_mode init/main: fix reset_device comment ipwireless: missing assignment goldfish: remove unreachable line of code coredump: Fix do_coredump() comment stacktrace.h: remove duplicate declaration task_struct smpboot.h: Remove unused function prototype treewide: Fix typo in printk messages treewide: Fix typo in printk messages mod_devicetable: fix comment for match_flags
2015-04-11sd, mmc, virtio_blk, string_helpers: fix block size unitsJames Bottomley1-2/+2
The current string_get_size() overflows when the device size goes over 2^64 bytes because the string helper routine computes the suffix from the size in bytes. However, the entirety of Linux thinks in terms of blocks, not bytes, so this will artificially induce an overflow on very large devices. Fix this by making the function string_get_size() take blocks and the block size instead of bytes. This should allow us to keep working until the current SCSI standard overflows. Also fix virtio_blk and mmc (both of which were also artificially multiplying by the block size to pass a byte side to string_get_size()). The mathematics of this is pretty simple: we're taking a product of size in blocks (S) and block size (B) and trying to re-express this in exponential form: S*B = R*N^E (where N, the exponent is either 1000 or 1024) and R < N. Mathematically, S = RS*N^ES and B=RB*N^EB, so if RS*RB < N it's easy to see that S*B = RS*RB*N^(ES+EB). However, if RS*BS > N, we can see that this can be re-expressed as RS*BS = R*N (where R = RS*BS/N < N) so the whole exponent becomes R*N^(ES+EB+1) [jejb: fix incorrect 32 bit do_div spotted by kbuild test robot <fengguang.wu@intel.com>] Acked-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: James Bottomley <JBottomley@Odin.com>
2015-04-10mmc: sdhci-st: Update the quirks for this controller.Peter Griffin1-1/+4
Some additional quirks need to be enabled now we support UHS modes. This avoids some spurious warnings like "Got data interrupt 0x00000002 even though no data operation was in progress" Testing on stih410-b2120 board achieves the following speeds with HS200 eMMC card. max-frequency = 200Mhz /dev/mmcblk0p1: Timing buffered disk reads: 270 MB in 3.02 seconds = 89.54 MB/sec max-frequency = 100Mhz root@debian-armhf:~# hdparm -t /dev/mmcblk0p1 /dev/mmcblk0p1: Timing buffered disk reads: 210 MB in 3.00 seconds = 70.00 MB/sec max-frequency = 50Mhz root@debian-armhf:~# hdparm -t /dev/mmcblk0p1 /dev/mmcblk0p1: Timing buffered disk reads: 118 MB in 3.00 seconds = 39.28 MB/sec This is better than the 3.10 kernel which achieves 77.59 MB/sec at 200Mhz clock (same board/soc/eMMC). Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add sdhci_st_set_uhs_signaling function.Peter Griffin1-0/+51
To allow UHS modes to work properly we need to provide the st specific set_uhs_signaling callback function. This function differs from the generic sdhci_set_uhs_signaling callback in that we need to configure the correct delay depending on the UHS mode, and also set the V18_EN bit. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add st_mmcss_cconfig function to configure mmcss glue registers.Peter Griffin1-0/+88
STiH407 family SoC's have glue registers in the flashSS subsystem which are used to configure the Arasan HC. This patch configures these glue registers according to what has been specified in the DT. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add delay management functions for top registers (eMMC).Peter Griffin1-0/+59
Due to the tight timing constraints in some UHS modes, it is required to have some delay management in the design. Two types of delay management are supported in the HW: - 1) Static delay management 2) Dynamic delay management NB: The delay management is only there when eMMC interface is selected. 1: Static delay management: is used to provide PVT dependent static delay on the clock/data lines to manage setup/hold requirements of the interface. The maximum delay possible is 3.25ns. These delays are PVT dependent, and thus delay values applied are not accurate and vary across provcess voltage and temperature range. Due to this these delays must not be used on the very time critical paths. 2. Dynamic delay locked loop (DLL): is used to provide dynamic delay management. The advantage of DLL is that it provides accurate & PVT indepedent delay. The DLL is used to provide delay on the loopback clock on "Read Path" to capture read data reliably. On TX path the clock on which output data is transmitted is delayed, resulting in delay of TX data. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add support for de-asserting reset signal and top regs resourcePeter Griffin1-3/+57
STiH407 family SoC's can have a reset signal for the controller which needs to be managed. Also the eMMC controller has some additional 'top' memory mapped registers which are used to manage the dynamic and static delay required for UHS modes. This patch adds support for creating the mapping, which will be used by subsequent patches. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2015-04-10mmc: sdhci-st: Add macros for register offsets and bitfields for mmcss glue regsPeter Griffin1-0/+91
The stih407 family SoC's have additional glue registers in the flashSS which are used to configure the Arasan controller. This patch adds macros for the register offsets and bitfields which will be used by subsequent patches to support stih407 family SoC's. Signed-off-by: Peter Griffin <peter.griffin@linaro.org> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Acked-by: Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-03 04:17:50 +0300