Age | Commit message (Expand) | Author | Files | Lines |
2018-05-03 | mmc: core: Add tunable delay before detecting card after card is inserted | Shawn Lin | 2 | -4/+12 |
2018-05-03 | mmc: sdhci-omap: Get IODelay values for 3.3v DDR mode | Kishon Vijay Abraham I | 1 | -1/+8 |
2018-05-03 | mmc: sdhci-omap: Add sdhci_omap specific ops for enable_sdio_irq | Kishon Vijay Abraham I | 1 | -0/+19 |
2018-05-03 | mmc: sdhci-omap: Add support for MMC/SD controller in k2g SoC | Kishon Vijay Abraham I | 1 | -0/+5 |
2018-05-03 | mmc: sdhci-omap: Workaround for Errata i834 | Kishon Vijay Abraham I | 1 | -1/+2 |
2018-05-03 | mmc: sdhci: Program a relatively accurate SW timeout value | Kishon Vijay Abraham I | 2 | -7/+55 |
2018-05-03 | mmc: sdhci: Factor out target_timeout calculation | Adrian Hunter | 1 | -18/+30 |
2018-05-03 | mmc: sdhci: Add quirk to disable HW timeout | Adrian Hunter | 2 | -4/+39 |
2018-05-03 | mmc: sdhci: Disable 1.8v modes (HS200/HS400/UHS) if controller can't support ... | Kishon Vijay Abraham I | 1 | -0/+10 |
2018-05-03 | mmc: sdhci-omap: Invoke sdhci_get_of_property to read sdhci dt properties | Kishon Vijay Abraham I | 1 | -0/+1 |
2018-05-03 | mmc: sdhci-omap: Workaround for Errata i843 | Kishon Vijay Abraham I | 1 | -1/+34 |
2018-05-03 | mmc: sdhci-omap: Remove setting ADMA capability in driver | Kishon Vijay Abraham I | 1 | -3/+0 |
2018-05-03 | mmc: sdhci-omap: Fix when capabilities are obtained from SDHCI_CAPABILITIES reg | Kishon Vijay Abraham I | 1 | -5/+12 |
2018-05-02 | mmc: mediatek: add 64G DRAM DMA support | Chaotian Jing | 1 | -7/+49 |
2018-05-02 | mmc: mmci: Remove bogus local_irq_save() | Thomas Gleixner | 1 | -5/+0 |
2018-05-02 | mmc: sdhci-esdhc-imx: Set maximum watermark levels for PIO access | Andrew Gabbasov | 1 | -0/+22 |
2018-05-02 | mmc: sdhci-msm: support voltage pad switching | Vijay Viswanath | 1 | -2/+55 |
2018-05-02 | mmc: sdhci-msm: Add support to store supported vdd-io voltages | Vijay Viswanath | 1 | -1/+28 |
2018-05-02 | mmc: renesas_sdhi_internal_dmac: add R8A77980 to whitelist | Sergei Shtylyov | 1 | -0/+1 |
2018-05-02 | mmc: sdhci-cadence: fix logically and structurally dead code | Gustavo A. R. Silva | 1 | -2/+2 |
2018-05-02 | mmc: host: simplify getting .drvdata | Wolfram Sang | 3 | -12/+6 |
2018-05-02 | mmc: mediatek: use of_device_get_match_data() | Ryder Lee | 1 | -5/+2 |
2018-05-02 | mmc: sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers | Adrian Hunter | 1 | -7/+27 |
2018-05-02 | mmc: renesas_sdhi_internal_dmac: remove superfluous WARN | Wolfram Sang | 1 | -4/+1 |
2018-05-02 | mmc: renesas_sdhi_internal_dmac: use more generic whitelisting | Wolfram Sang | 1 | -2/+5 |
2018-05-02 | mmc: renesas_sdhi: Fix alignment check of sg buffer | Masaharu Hayakawa | 1 | -7/+8 |
2018-05-02 | mmc: renesas_sdhi: use helpers to access struct scatterlist members | Niklas Söderlund | 1 | -5/+3 |
2018-05-02 | mmc: sdhci-pci: Avoid 3.3V signaling on some NI 904x | Kyle Roeschley | 2 | -0/+5 |
2018-05-02 | mmc: core: Add capability to avoid 3.3V signaling | Kyle Roeschley | 3 | -0/+24 |
2018-05-02 | mmc: Remove depends on HAS_DMA in case of platform dependency | Geert Uytterhoeven | 1 | -8/+2 |
2018-05-02 | mmc: sunxi: Drop the init / reset of the controller from set_ios | Maxime Ripard | 1 | -7/+4 |
2018-05-02 | mmc: sunxi: Add runtime_pm support | Maxime Ripard | 1 | -0/+48 |
2018-05-02 | mmc: sunxi: Move the card power configuration to a function | Maxime Ripard | 1 | -15/+25 |
2018-05-02 | mmc: sunxi: Move clock configuration to a function | Maxime Ripard | 1 | -15/+18 |
2018-05-02 | mmc: sunxi: Move bus width configuration to a function | Maxime Ripard | 1 | -12/+17 |
2018-05-02 | mmc: sunxi: Change sunxi_mmc_init_host argument type | Maxime Ripard | 1 | -3/+2 |
2018-05-02 | mmc: sunxi: Reorder the headers | Maxime Ripard | 1 | -23/+20 |
2018-05-02 | mmc: core: sdio: Set SDIO clock of SDR104 to 150MHz for Marvell 8887 chip | Diwakar Sharma | 1 | -0/+3 |
2018-05-02 | mmc: core: Add a new quirk for limiting clock rate | harish_kandiga@mentor.com | 2 | -1/+11 |
2018-05-02 | mmc: dw_mmc: fix misleading comment in dw_mci_rk3288_set_ios | Shawn Lin | 1 | -3/+2 |
2018-05-02 | mmc: sdhci-cadence: send tune request twice to work around errata | Masahiro Yamada | 1 | -4/+18 |
2018-05-02 | mmc: meson: update doc to support Meson-AXG platform | Nan Li | 2 | -3/+3 |
2018-05-02 | mmc: meson-axg: add support for the Meson-AXG platform | Nan Li | 1 | -10/+51 |
2018-05-02 | mmc: card: Don't show eMMC RPMB and BOOT areas in /proc/partitions | Andrew Gabbasov | 1 | -1/+2 |
2018-05-02 | mmc: jz4740: Use dma_request_chan() | Ezequiel Garcia | 1 | -15/+7 |
2018-05-02 | mmc: jz4740: Add support for the JZ4780 | Alex Smith | 2 | -23/+72 |
2018-05-02 | mmc: jz4740: Set clock rate to mmc->f_max rather than JZ_MMC_CLK_RATE | Alex Smith | 1 | -1/+1 |
2018-05-02 | mmc: jz4740: Introduce devicetree probe | Ezequiel Garcia | 1 | -10/+41 |
2018-05-02 | mmc: jz4740: Reset the device requesting the interrupt | Zubair Lutfullah Kakakhel | 1 | -1/+2 |
2018-05-02 | mmc: jz4740: Use dev_get_platdata | Ezequiel Garcia | 1 | -3/+3 |