summaryrefslogtreecommitdiff
path: root/drivers/mmc/host
AgeCommit message (Collapse)AuthorFilesLines
2013-08-25mmc: dw_mmc-pltfm: include 'dw_mmc-pltfm.h'Jingoo Han1-0/+1
Include 'dw_mmc-pltfm.h' header file in order to fix the following sparse warnings: drivers/mmc/host/dw_mmc-pltfm.c:36:5: warning: symbol 'dw_mci_pltfm_register' was not declared. Should it be static? drivers/mmc/host/dw_mmc-pltfm.c:94:1: warning: symbol 'dw_mci_pltfm_pmops' was not declared. Should it be static? drivers/mmc/host/dw_mmc-pltfm.c:118:5: warning: symbol 'dw_mci_pltfm_remove' was not declared. Should it be static? Suggested-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: tmio_mmc_dma: fix PIO fallback on SDHISergei Shtylyov1-2/+2
I'm testing SH-Mobile SDHI driver in DMA mode with a new DMA controller using 'bonnie++' and getting DMA error after which the tmio_mmc_dma.c code falls back to PIO but all commands time out after that. It turned out that the fallback code calls tmio_mmc_enable_dma() with RX/TX channels already freed and pointers to them cleared, so that the function bails out early instead of clearing the DMA bit in the CTL_DMA_ENABLE register. The regression was introduced by commit 162f43e31c5a376ec16336e5d0ac973373d54c89 (mmc: tmio: fix a deadlock). Moving tmio_mmc_enable_dma() calls to the top of the PIO fallback code in tmio_mmc_start_dma_{rx|tx}() helps. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: stable@vger.kernel.org # 3.1+ Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: dw_mmc: add missing MFD_SYSCON dependency for SOCFPGAJingoo Han1-1/+1
Added missing MFD_SYSCON dependency for SOCFPGA in order to fix the following link error. drivers/mmc/host/dw_mmc-socfpga.c:49: undefined reference to `syscon_regmap_lookup_by_compatible' Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: atmel-mci: prepare clk before calling enableBoris BREZILLON1-7/+27
Replace clk_enable/disable with clk_prepare_enable/disable_unprepare to avoid common clk framework warnings. Signed-off-by: Boris BREZILLON <b.brezillon@overkiz.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: host: Remove a duplicate line in MakefileWei WANG1-2/+0
Signed-off-by: Wei WANG <wei_wang@realsil.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: omap_hsmmc: fix dependency on indirect header inclusionFelipe Balbi1-0/+1
omap_hsmmc.c depends on <linux/sizes.h> being included indirectly by another header. Once we enable COMPILE_TEST for this driver, we might compile under architectures which won't include <linux/sizes.h> for us. In fact, one such case is x86. In order to prevent compile breakages, let's explicitly include <linux/sizes.h>. Signed-off-by: Felipe Balbi <balbi@ti.com> Acked-by: Balaji T K <balajitk@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: dw_mmc: Handle DW_MCI_QUIRK_IDMAC_DTO properlyDoug Anderson1-11/+10
In (1fb5f68 mmc: dw_mmc: Don't loop when handling an interrupt), the code for handling DW_MCI_QUIRK_IDMAC_DTO became dead code. Move it to where it ought to live. Found by code inspection and compile-tested only--I don't know of any boards that need DW_MCI_QUIRK_IDMAC_DTO. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: sdhci: request irq after sdhci_init() is calledShawn Guo1-2/+2
Generally request_irq() should be called after hardware has been initialized into a sane state. However, sdhci driver currently calls request_irq() before sdhci_init(). At least, the following kernel panic seen on i.MX6 is caused by that. The sdhci controller on i.MX6 may have noisy glitch on DAT1 line, which will trigger SDIO interrupt handling once request_irq() is called. But at this point, the SDIO interrupt handler host->sdio_irq_thread has not been registered yet. Thus, we see the NULL pointer access with wake_up_process(host->sdio_irq_thread) in mmc_signal_sdio_irq(). Fix the panic by simply reverse the calling sequence between request_irq() and sdhci_init(). sdhci-pltfm: SDHCI platform and OF driver helper mmc0: no vqmmc regulator found mmc0: no vmmc regulator found Unable to handle kernel NULL pointer dereference at virtual address 00000000 pgd = 80004000 [00000000] *pgd=00000000 Internal error: Oops: 5 [#1] SMP ARM Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 3.10.0+ #3 task: 9f860000 ti: 9f862000 task.ti: 9f862000 PC is at wake_up_process+0xc/0x44 LR is at sdhci_irq+0x378/0x93c pc : [<8004f768>] lr : [<803fb698>] psr: 40000193 sp : 9f863ba0 ip : 9f863bb8 fp : 9f863bb4 r10: 9f807900 r9 : 80761fbc r8 : 00000000 r7 : 00000000 r6 : 00000000 r5 : 00000001 r4 : 9fa68000 r3 : 00000001 r2 : 00000002 r1 : 20000193 r0 : 00000000 Flags: nZcv IRQs off FIQs on Mode SVC_32 ISA ARM Segment kernel Control: 10c53c7d Table: 8000404a DAC: 00000017 Process swapper/0 (pid: 1, stack limit = 0x9f862238) Stack: (0x9f863ba0 to 0x9f864000) 3ba0: 00000001 9fa68000 9f863c04 9f863bb8 803fb698 8004f768 8011af00 80265aac 3bc0: 00000000 000003d9 00000000 9fa51880 00000001 00000000 9f863c14 9fa53640 3be0: 00000001 00000000 00000000 00000036 80761fbc 9f807900 9f863c3c 9f863c08 3c00: 80075154 803fb32c 802c2b38 802c63d8 802c63cc 9f807900 00000001 9f862000 3c20: 00000036 00000000 9f807930 60000113 9f863c54 9f863c40 800752ec 8007510c 3c40: 9f807900 00000001 9f863c6c 9f863c58 80078324 800752a8 00000036 8071fd64 3c60: 9f863c84 9f863c70 80074ac0 80078294 00000140 8072ab78 9f863cac 9f863c88 3c80: 8000ee34 80074aa4 00000000 a080e10c 8072acbc 9f863cd0 a080e100 00000036 3ca0: 9f863ccc 9f863cb0 80008600 8000edec 805386a8 60000113 ffffffff 9f863d04 3cc0: 9f863d24 9f863cd0 8000e0c0 800085dc 9f807950 60000113 00000007 00000000 3ce0: 9f807900 9fa53640 9f807950 9fa68240 00000036 9f807930 60000113 9f863d24 3d00: 9f863d28 9f863d18 80076834 805386a8 60000113 ffffffff 9f863d64 9f863d28 3d20: 80076834 80538688 00000000 800bfe4c 00002fac 00000001 9f863d54 9fa53640 3d40: 9f807900 803fb320 9fa68240 00000080 00000000 00000036 9f863d94 9f863d68 3d60: 80076b38 80076674 00000080 9fa68240 9fa68000 04000000 9fa6836c 9fa68380 3d80: 806d620c 80700350 9f863dc4 9f863d98 803fce8c 80076a88 9fa532c0 9fa68240 3da0: 9fa51490 9fa51490 9fa68240 00000000 9f8ae600 9f81d080 9f863df4 9f863dc8 3dc0: 803fea0c 803fc808 9f863de4 9f863dd8 80125850 807b1ed8 807576b8 9f8ae610 3de0: 00000000 807576b8 9f863e04 9f863df8 802ee0d4 803fe798 9f863e2c 9f863e08 3e00: 802ecd1c 802ee0c0 00000000 9f8ae610 807576b8 9f8ae644 00000000 000000a9 3e20: 9f863e4c 9f863e30 802ecec0 802ecc30 9f83355c 807576b8 802ece2c 00000000 3e40: 9f863e74 9f863e50 802eb3d8 802ece38 9f83355c 9f8ac3b4 9f833570 807576b8 3e60: 80746e70 9fa51400 9f863e84 9f863e78 802ec838 802eb388 9f863eb4 9f863e88 3e80: 802ec3d0 802ec824 80692748 807620c0 9f863eb4 807576b8 00000006 807620c0 3ea0: 00000000 000000a9 9f863edc 9f863eb8 802ed3e8 802ec2fc 9f862000 00000006 3ec0: 807620c0 00000000 000000a9 80700350 9f863eec 9f863ee0 802ee2f8 802ed374 3ee0: 9f863efc 9f863ef0 80700364 802ee2b8 9f863f54 9f863f00 8000870c 8070035c 3f00: 9f863f54 9f863f10 9f862000 00000000 00000000 00000006 00000006 806d3aa4 3f20: 00000000 80688b18 9f863f54 80713560 00000006 80713540 807620c0 000000a9 3f40: 806d620c 8071ec24 9f863f94 9f863f58 806d6994 800086dc 00000006 00000006 3f60: 806d620c f6bfffff fb7f5df7 00000000 8052da28 00000000 00000000 00000000 3f80: 00000000 00000000 9f863fac 9f863f98 8052da38 806d689c ffffffff 00000000 3fa0: 00000000 9f863fb0 8000e5d8 8052da34 00000000 00000000 00000000 00000000 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 d9cdf5ff 1fff5ffe Backtrace: [<8004f75c>] (wake_up_process+0x0/0x44) from [<803fb698>] (sdhci_irq+0x378/0x93c) r4:9fa68000 r3:00000001 [<803fb320>] (sdhci_irq+0x0/0x93c) from [<80075154>] (handle_irq_event_percpu+0x54/0x19c) [<80075100>] (handle_irq_event_percpu+0x0/0x19c) from [<800752ec>] (handle_irq_event+0x50/0x70) [<8007529c>] (handle_irq_event+0x0/0x70) from [<80078324>] (handle_fasteoi_irq+0x9c/0x170) r5:00000001 r4:9f807900 [<80078288>] (handle_fasteoi_irq+0x0/0x170) from [<80074ac0>] (generic_handle_irq+0x28/0x38) r5:8071fd64 r4:00000036 [<80074a98>] (generic_handle_irq+0x0/0x38) from [<8000ee34>] (handle_IRQ+0x54/0xb4) r4:8072ab78 r3:00000140 [<8000ede0>] (handle_IRQ+0x0/0xb4) from [<80008600>] (gic_handle_irq+0x30/0x64) r8:00000036 r7:a080e100 r6:9f863cd0 r5:8072acbc r4:a080e10c r3:00000000 [<800085d0>] (gic_handle_irq+0x0/0x64) from [<8000e0c0>] (__irq_svc+0x40/0x54) Exception stack(0x9f863cd0 to 0x9f863d18) 3cc0: 9f807950 60000113 00000007 00000000 3ce0: 9f807900 9fa53640 9f807950 9fa68240 00000036 9f807930 60000113 9f863d24 3d00: 9f863d28 9f863d18 80076834 805386a8 60000113 ffffffff r7:9f863d04 r6:ffffffff r5:60000113 r4:805386a8 [<8053867c>] (_raw_spin_unlock_irqrestore+0x0/0x30) from [<80076834>] (__setup_irq+0x1cc/0x414) [<80076668>] (__setup_irq+0x0/0x414) from [<80076b38>] (request_threaded_irq+0xbc/0x140) [<80076a7c>] (request_threaded_irq+0x0/0x140) from [<803fce8c>] (sdhci_add_host+0x690/0xb88) [<803fc7fc>] (sdhci_add_host+0x0/0xb88) from [<803fea0c>] (sdhci_esdhc_imx_probe+0x280/0x4d4) r8:9f81d080 r7:9f8ae600 r6:00000000 r5:9fa68240 r4:9fa51490 [<803fe78c>] (sdhci_esdhc_imx_probe+0x0/0x4d4) from [<802ee0d4>] (platform_drv_probe+0x20/0x24) r8:807576b8 r7:00000000 r6:9f8ae610 r5:807576b8 r4:807b1ed8 [<802ee0b4>] (platform_drv_probe+0x0/0x24) from [<802ecd1c>] (driver_probe_device+0xf8/0x208) [<802ecc24>] (driver_probe_device+0x0/0x208) from [<802ecec0>] (__driver_attach+0x94/0x98) r8:000000a9 r7:00000000 r6:9f8ae644 r5:807576b8 r4:9f8ae610 r3:00000000 [<802ece2c>] (__driver_attach+0x0/0x98) from [<802eb3d8>] (bus_for_each_dev+0x5c/0x90) r6:00000000 r5:802ece2c r4:807576b8 r3:9f83355c [<802eb37c>] (bus_for_each_dev+0x0/0x90) from [<802ec838>] (driver_attach+0x20/0x28) r6:9fa51400 r5:80746e70 r4:807576b8 [<802ec818>] (driver_attach+0x0/0x28) from [<802ec3d0>] (bus_add_driver+0xe0/0x234) [<802ec2f0>] (bus_add_driver+0x0/0x234) from [<802ed3e8>] (driver_register+0x80/0x14c) r8:000000a9 r7:00000000 r6:807620c0 r5:00000006 r4:807576b8 [<802ed368>] (driver_register+0x0/0x14c) from [<802ee2f8>] (platform_driver_register+0x4c/0x60) [<802ee2ac>] (platform_driver_register+0x0/0x60) from [<80700364>] (sdhci_esdhc_imx_driver_init+0x14/0x1c) [<80700350>] (sdhci_esdhc_imx_driver_init+0x0/0x1c) from [<8000870c>] (do_one_initcall+0x3c/0x164) [<800086d0>] (do_one_initcall+0x0/0x164) from [<806d6994>] (kernel_init_freeable+0x104/0x1d0) [<806d6890>] (kernel_init_freeable+0x0/0x1d0) from [<8052da38>] (kernel_init+0x10/0xec) [<8052da28>] (kernel_init+0x0/0xec) from [<8000e5d8>] (ret_from_fork+0x14/0x3c) r4:00000000 r3:ffffffff Code: e89da800 e1a0c00d e92dd818 e24cb004 (e5903000) ---[ end trace e9af3588936b63f0 ]--- Kernel panic - not syncing: Fatal exception in interrupt Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: mxs-mmc: Check the return value from stmp_reset_block()Fabio Estevam1-3/+11
stmp_reset_block() may fail, so let's check its return value and propagate it in the case of error. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: mxs-mmc: Use devm_clk_get()Fabio Estevam1-5/+3
Using devm_clk_get() allows us to remove the clk_put() calls, so let's use it to simplify the code. Rename the 'out_clk_put' label to 'out_clk_disable' now that clk_put is removed. Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: jz4740: fix return value check in jz4740_mmc_probe()Wei Yongjun1-3/+2
In case of error, the function devm_ioremap_resource() returns ERR_PTR() and never returns NULL. The NULL test in the return value check should be replaced with IS_ERR(). Also there is already a error message within devm_ioremap_resource(), so remove the dev_err call to avoid redundant error message. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: vub300: Staticize vub300_init_cardSachin Kamat1-1/+1
'vub300_init_card' is used only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-08-25mmc: sdhci-bcm2835: Staticize bcm2835_sdhci_get_min_clockSachin Kamat1-1/+1
'bcm2835_sdhci_get_min_clock' is used only in this file. Make it static. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-23mmc: tmio: fix compiler warningGuennadi Liakhovetski1-1/+5
This patch fixes a compiler warning: drivers/mmc/host/tmio_mmc_pio.c: In function 'tmio_mmc_power_on': drivers/mmc/host/tmio_mmc_pio.c:798:19: warning: ignoring return value of 'regulator_enable', declared with attribute warn_unused_result [-Wunused-result] Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-10Merge tag 'mmc-updates-for-3.11-rc1' of ↵Linus Torvalds50-472/+1168
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC updates from Chris Ball: "MMC highlights for 3.11: Core: - Add support for eMMC 5.1 devices - Add MMC_CAP_AGGRESSIVE_PM capability for aggressive power management of eMMC/SD between requests, using runtime PM - Add an ioctl to perform the eMMC 4.5 Sanitize command. Sample code at: git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc-utils.git Drivers: - dw_mmc: Add support for Rockchip's Cortex-A9 SoCs - dw_mmc: Add support for Altera SoCFPGAs - sdhci-esdhc-imx: Add support for 8-bit bus width, non-removable cards - sdhci-bcm-kona: New driver for Broadcom Kona (281xx) SoCs - sdhi/tmio: Add DT DMA support" * tag 'mmc-updates-for-3.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (87 commits) mmc: bcm281xx SDHCI driver mmc: sdhci: add card_event callback to sdhci mmc: core: Fixup Oops for SDIO shutdown mmc: sdhci-pci: add another device id mmc: esdhc: Fix bug when writing to SDHCI_HOST_CONTROL register mmc: esdhc: Add support for 8-bit bus width and non-removable card mmc: core: production year for eMMC 4.41 and later mmc: omap: remove unnecessary #if 0's mmc: sdhci: fix ctrl_2 on super-speed selection mmc: dw_mmc-pltfm: add Rockchip variant mmc: dw_mmc-pltfm: move probe and remove below dt match table mmc: dw_mmc-pltfm: remove static from dw_mci_pltfm_remove mmc: sdhci-acpi: add support for eMMC hardware reset for HID 80860F14 mmc: sdhci-pci: add support for eMMC hardware reset for BYT eMMC. mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGA mmc: sdhci: fix caps2 for HS200 sdhci-pxav3: Fix runtime PM initialization mmc: core: Add DT-bindings for MMC_CAP2_FULL_PWR_CYCLE mmc: core: Invent MMC_CAP2_FULL_PWR_CYCLE mmc: core: Enable power_off_notify for eMMC shutdown sequence ...
2013-07-05mmc: bcm281xx SDHCI driverChristian Daudt3-0/+360
Add SDHCI driver for the Broadcom 281xx SoCs. Still missing: - power managemement Signed-off-by: Christian Daudt <csd@broadcom.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: sdhci: add card_event callback to sdhciChristian Daudt2-0/+5
Add a card_event callback to sdhci so that clients can provide their own card_event to be called when card_detect is triggered. Signed-off-by: Christian Daudt <csd@broadcom.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: sdhci-pci: add another device idAdrian Hunter1-0/+9
Add another PCI device id for an eMMC host controller. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: esdhc: Fix bug when writing to SDHCI_HOST_CONTROL registerOded Gabbay1-0/+17
The P2020 has a non-standard implementation of the SDHCI_HOST_CONTROL register. This patch adds a QUIRK in the SDHCI header to signal that a host controller has a non-standard SDHCI_HOST_CONTROL register. The patch adds a check to the function esdhc_writeb in file sdhci-of-esdhc.c, where it checks if the write is done to the SDHCI_HOST_CONTROL register and th host has the above mentioned QUIRK, then the function simply returns instead of writing to the register. The patch also detects if the processor is P2020 (by looking in dev tree) and if so, adds the QUIRK to the host->quirk2 Signed-off-by: Oded Gabbay <ogabbay@advaoptical.com> Reviewed-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: esdhc: Add support for 8-bit bus width and non-removable cardOded Gabbay2-1/+50
This patch adds support of connecting an MMC media using an 8-bit bus width connection to Freescale's P2020 H/W SDHC controller. During the probe function, the generic function mmc_of_parse is called to detect whether the controller is configured with 8-bit bus width. Also, the generic function detects if the non-removable property is set in the device tree. The function esdhc_pltfm_bus_width was added because the bus width configuration is platform specific. Signed-off-by: Oded Gabbay <ogabbay@advaoptical.com> Reviewed-by: Anton Vorontsov <anton@enomsg.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: omap: remove unnecessary #if 0'sLuciano Coelho1-16/+0
In commit 3451c067 (mmc: omap: add DMA engine support), some #if 0's were used to comment out parts of the code. This has been in the code for over a year and are not needed anymore (and the commented-out code doesn't even compile). Remove them. Signed-off-by: Luciano Coelho <coelho@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: sdhci: fix ctrl_2 on super-speed selectionGiuseppe CAVALLARO1-4/+3
This patch fixes the HC ctrl_2 programming where, in case of SDR104 and HS200, we have to write 100b in the the UHS Mode bits. We wrote 101b that is reserved from Arasan Specs. Reported-by: Youssef Triki <youssef.triki@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: dw_mmc-pltfm: add Rockchip variantHeiko Stübner1-1/+20
Cortex-A9 SoCs from Rockchip use a slightly modified variant of dw_mmc controllers that seems to require the SDMMC_CMD_USE_HOLD_REG bit to always be set. There also seem to be no other modifications (additional register etc) present, so to keep the footprint low, add this small variant to the pltfm driver. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: dw_mmc-pltfm: move probe and remove below dt match tableHeiko Stübner1-14/+14
In a subsquent patch probe will need to do some handling of data from the dt match table. So to prevent the need for forward declarations, move probe and remove below the match table. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: dw_mmc-pltfm: remove static from dw_mci_pltfm_removeHeiko Stübner1-1/+1
dw_mci_pltfm_remove gets exported and used by dw_mmc-exynos, so should not be static. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: sdhci-acpi: add support for eMMC hardware reset for HID 80860F14Adrian Hunter1-1/+27
Add support for eMMC hardware reset for HID 80860F14. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-05mmc: sdhci-pci: add support for eMMC hardware reset for BYT eMMC.Adrian Hunter1-2/+30
Add support for eMMC hardware reset for BYT eMMC. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-07-03Merge branch 'for-linus' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds2-39/+130
Pull ARM updates from Russell King: "This contains the usual updates from other people (listed below) and the usual random muddle of miscellaneous ARM updates which cover some low priority bug fixes and performance improvements. I've started to put the pull request wording into the merge commits, which are: - NoMMU stuff: This includes the following series sent earlier to the list: - nommu-fixes - R7 Support - MPU support I've left out the ARCH_MULTIPLATFORM/!MMU stuff that Arnd and I were discussing today until we've reached a conclusion/that's had some more review. This is rebased (and re-tested) on your devel-stable branch because otherwise there were going to be conflicts with Uwe's V7M work now that you've merged that. I've included the fix for limiting MPU to CPU_V7. - Huge page support These changes bring both HugeTLB support and Transparent HugePage (THP) support to ARM. Only long descriptors (LPAE) are supported in this series. The code has been tested on an Arndale board (Exynos 5250). - LPAE updates Please pull these miscellaneous LPAE fixes I've been collecting for a while now for 3.11. They've been tested and reviewed by quite a few people, and most of the patches are pretty trivial. -- Will Deacon. - arch_timer cleanups Please pull these arch_timer cleanups I've been holding onto for a while. They're the same as my last posting, but have been rebased to v3.10-rc3. - mpidr linearisation (multiprocessor id register - identifies which CPU number we are in the system) This patch series that implements MPIDR linearization through a simple hashing algorithm and updates current cpu_{suspend}/{resume} code to use the newly created hash structures to retrieve context pointers. It represents a stepping stone for the implementation of power management code on forthcoming multi-cluster ARM systems. It has been tested on TC2 (dual cluster A15xA7 system), iMX6q, OMAP4 and Tegra, with processors hitting low-power states requiring warm-boot resume through the cpu_resume code path" * 'for-linus' of git://git.linaro.org/people/rmk/linux-arm: (77 commits) ARM: 7775/1: mm: Remove do_sect_fault from LPAE code ARM: 7777/1: Avoid extra calls to the C compiler ARM: 7774/1: Fix dtb dependency to use order-only prerequisites ARM: 7770/1: remove residual ARMv2 support from decompressor ARM: 7769/1: Cortex-A15: fix erratum 798181 implementation ARM: 7768/1: prevent risks of out-of-bound access in ASID allocator ARM: 7767/1: let the ASID allocator handle suspended animation ARM: 7766/1: versatile: don't mark pen as __INIT ARM: 7765/1: perf: Record the user-mode PC in the call chain. ARM: 7735/2: Preserve the user r/w register TPIDRURW on context switch and fork ARM: kernel: implement stack pointer save array through MPIDR hashing ARM: kernel: build MPIDR hash function data structure ARM: mpu: Ensure that MPU depends on CPU_V7 ARM: mpu: protect the vectors page with an MPU region ARM: mpu: Allow enabling of the MPU via kconfig ARM: 7758/1: introduce config HAS_BANDGAP ARM: 7757/1: mm: don't flush icache in switch_mm with hardware broadcasting ARM: 7751/1: zImage: don't overwrite ourself with a page table ARM: 7749/1: spinlock: retry trylock operation if strex fails on free lock ARM: 7748/1: oabi: handle faults when loading swi instruction from userspace ...
2013-07-03Merge tag 'late-for-linus' of ↵Linus Torvalds1-1/+13
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC late changes from Arnd Bergmann: "These are changes that arrived a little late before the merge window or that have multiple dependencies on previous branches so they did not fit into one of the earlier ones. There are 10 branches merged here, a total of 39 non-merge commits. Contents are a mixed bag for the above reasons: * Two new SoC platforms: ST microelectronics stixxxx and the TI 'Nspire' graphing calculator. These should have been in the 'soc' branch but were a little late * Support for the Exynos 5420 variant in mach-exynos, which is based on the other exynos branches to avoid conflicts. * Various small changes for sh-mobile, ux500 and davinci * Common clk support for MSM" * tag 'late-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: ux500: bail out on alien cpus ARM: davinci: da850: adopt to pinctrl-single change for configuring multiple pins serial: sh-sci: Initialise variables before access in sci_set_termios() ARM: stih41x: Add B2020 board support ARM: stih41x: Add B2000 board support ARM: sti: Add DEBUG_LL console support ARM: sti: Add STiH416 SOC support ARM: sti: Add STiH415 SOC support ARM: msm: Migrate to common clock framework ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Remove clock-7x30.h include file ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove custom clk_set_flags() API msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() msm: iommu: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare usb: otg: msm: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors msm_serial: Convert to clk_prepare/unprepare ...
2013-06-29Merge branches 'fixes', 'mcpm', 'misc' and 'mmci' into for-nextRussell King2-39/+130
2013-06-28Merge tag 'msm-clock-for-3.11b' of ↵Olof Johansson1-1/+13
git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm into next/late From David Brown: MSM clock updates for 3.11. Per Stephen Boyd's coverletter: Resending to collect higher level maintainer acks per Olof's request. The plan is to push this patchset through MSM to the arm-soc tree. This patchset moves the existing MSM clock code and affected drivers to the common clock framework. A prerequisite of moving to the common clock framework is to use clk_prepare() and clk_enable() so the first few patches migrate drivers to that call (clk_prepare() is a no-op on MSM right now). It also removes some custom clock APIs that MSM provides and finally moves the proc_comm clock code to the common struct clk. This patch series will be used as the foundation of the MSM 8660/8960 clock code that I plan to send out after this series. * tag 'msm-clock-for-3.11b' of git://git.kernel.org/pub/scm/linux/kernel/git/davidb/linux-msm: ARM: msm: Migrate to common clock framework ARM: msm: Make proc_comm clock control into a platform driver ARM: msm: Prepare clk_get() users in mach-msm for clock-pcom driver ARM: msm: Remove clock-7x30.h include file ARM: msm: Remove custom clk_set_{max,min}_rate() API ARM: msm: Remove custom clk_set_flags() API msm: iommu: Use clk_set_rate() instead of clk_set_min_rate() msm: iommu: Convert to clk_prepare/unprepare msm_sdcc: Convert to clk_prepare/unprepare usb: otg: msm: Convert to clk_prepare/unprepare msm_serial: Use devm_clk_get() and properly return errors msm_serial: Convert to clk_prepare/unprepare Acked-by: Chris Ball <cjb@laptop.org> # for msm_sdcc.c Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-27mmc: dw_mmc: Add support DW SD/MMC driver on SOCFPGADinh Nguyen5-2/+150
Add platform specific functionality for the DW SD/MMC driver for SoCFPGA. Move SDMMC_CMD_USE_HOLD_REG to dw_mmc.h so other platforms can use this define. Signed-off-by: Dinh Nguyen <dinguyen@altera.com> Reviewed-by: Pavel Machek <pavel@denx.de> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Olof Johansson <olof@lixom.net> Acked-by: Seungwon Jeon <tgih.jun@samsung.com Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: sdhci: fix caps2 for HS200Giuseppe CAVALLARO1-5/+9
Although the HC supports HS200 (eMMC) the caps2 are always zero; this means there's no way to use the super speed mode (when init the card). If the HC support SDR104, for SD3.0, so it also supports HS200 for eMMC and this patch just sets the MMC_CAP2_HS200 in the host caps2 field. Reported-by: Youssef Triki <youssef.triki@st.com> Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com> Reviewed-by: Philip Rakity <prakity@nvidia.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27sdhci-pxav3: Fix runtime PM initializationDaniel Drake1-4/+3
Commit bb691ae464b77d30e74c66480e98d74e88d6b194 breaks boot on OLPC XO-4, it hangs somewhere inside sdhci_add_host. When pm_runtime_set_autosuspend_delay() was being called, the device's usage counter was 0, causing the PM layer to runtime-suspend the device. We then went on to call sdhci_add_host() on a suspended device, which hung. Fix this by making the driver consistent with the omap_hsmmc driver, both in terms of runtime PM initialization and error handling. Now the device is not runtime-suspended until we exit the probe routine. Signed-off-by: Daniel Drake <dsd@laptop.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: jz4740: Use managed resourcesLars-Peter Clausen1-31/+6
Use managed resources for the mmio memory region and the clock. Makes the code a bit shorter. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: jz4740: Use slot-gpio helpersLars-Peter Clausen1-90/+23
Use the slot-gpio helpers to handle the write protect and card detect GPIO pins instead of re-implementing the same functionality in the driver. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: jz4740: Use SIMPLE_DEV_PM_OPSLars-Peter Clausen1-8/+3
It's a bit shorter than open-conding it. While we are at it also make jz4740_mmc_pm_ops static. Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: jz4740: Fix handling of read errors.Paul Cercueil1-0/+8
For no reason, the code handling write errors was implemented while the code handling read errors was missing. Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: jz4740: Remove duplicated code.Paul Cercueil1-5/+0
Signed-off-by: Paul Cercueil <paul@crapouillou.net> Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: sdhci: improve card removal check in sdhci_card_event()Shawn Guo1-2/+1
The following error randomly appears on an imx6q board where gpio is used to implement card-detection when mounting EXT4 rootfs during boot. mmc1: Card removed during transfer! mmc1: Resetting controller. mmcblk0: unknown error -123 sending read/write command, card status 0x900 end_request: I/O error, dev mmcblk0, sector 106744 EXT4-fs error (device mmcblk0p2): ext4_find_entry:1312: inode #5011: comm swapper/0: reading directory lblock 0 It turns out that the error message comes from the card removal check in function sdhci_card_event(). While we have a well implemented function sdhci_do_get_cd() handling all the possible cases of CD, the current code only checks controller internal CD case. That causes problem for other CD cases like gpio on above imx6q board. Improve the check by using sdhci_do_get_cd() to cover all possible CD cases, so that above error on the imx6q board gets fixed. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: dw_mmc: Add the ability to set the ciu clock frequencyDoug Anderson1-4/+13
As of now we rely on code outside of the driver to set the ciu clock frequency. There's no reason to do that. Add support for setting up the clock in the driver during probe. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: dw_mmc: Handle late vmmc regulators with EPROBE_DEFERDoug Anderson1-14/+20
It is possible to specify a regulator that should be turned on when dw_mmc is probed. At the moment dw_mmc will fail to use the regulator properly if the regulator probes after dw_mmc. Fix this problem by honoring EPROBE_DEFER. At the same time move the regulator code out of the slot init code. We only specify one regulator for the whole device and other parts of the code (like suspend/resume) assume that the regulator has only been enabled once. Signed-off-by: Doug Anderson <dianders@chromium.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: esdhc-imx: parse max-frequency from devicetreeLucas Stach1-1/+17
In order to make it possible to reduce the SD bus frequency, parse the optional "max-frequency" attribute as documented in devicetree/bindings/mmc/mmc.txt Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: sdhci-esdhc: calculate sdclk divider from controller clockLucas Stach3-6/+15
The SDCLK is divided down from the host controller clock. Host controller clock may be different from the maximum SDCLK, so get it from the platform, instead of just using the max SDCLK. Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: atmel-mci: remove include <mach/cpu.h>Nicolas Ferre1-2/+0
Header file not needed anymore as we have removed the calls to cpu_is_xxx() macro. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: dw_mmc-pci: convert to use pcim_* and devm_*Andy Shevchenko1-35/+15
The PCI driver is getting simplier and tidier with pcim_* and devm_* functions in use. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: dw_mmc: eliminate useless usage of retAndy Shevchenko2-20/+5
In few places usage of ret variable is not needed. This patch simplifies those pieces of code. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: dw_mmc-pltfm: don't check resource with devm_ioremap_resourceAndy Shevchenko1-5/+3
devm_ioremap_resource does sanity checks on the given resource. No need to duplicate this in the driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: sirf: fix sdhci_pltfm_init sequenceArnd Bergmann1-28/+23
Patch "mmc: sdhci: Add size for caller in init+register" changed the interface for sdhci_pltfm_init, while patch "mmc: sdhci-sirf: add mmc host sdhci-pltfm based driver for SiRF SoCs" added a new driver with the old interface. This changes the sirf driver to use the new interface, avoiding one warning, and simplifying the init sequence. Since we're here already, this also adds an error path for failed clk_prepare_enable. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Christian Daudt <csd@broadcom.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2013-06-27mmc: host: use platform_{get,set}_drvdata()Jingoo Han3-5/+5
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Acked-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Chris Ball <cjb@laptop.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-02 06:22:24 +0300