summaryrefslogtreecommitdiff
path: root/drivers/mmc/host/tmio_mmc.h
AgeCommit message (Collapse)AuthorFilesLines
2019-09-13mmc: tmio: Fixup runtime PM management during probeUlf Hansson1-0/+1
The tmio_mmc_host_probe() calls pm_runtime_set_active() to update the runtime PM status of the device, as to make it reflect the current status of the HW. This works fine for most cases, but unfortunate not for all. Especially, there is a generic problem when the device has a genpd attached and that genpd have the ->start|stop() callbacks assigned. More precisely, if the driver calls pm_runtime_set_active() during ->probe(), genpd does not get to invoke the ->start() callback for it, which means the HW isn't really fully powered on. Furthermore, in the next phase, when the device becomes runtime suspended, genpd will invoke the ->stop() callback for it, potentially leading to usage count imbalance problems, depending on what's implemented behind the callbacks of course. To fix this problem, convert to call pm_runtime_get_sync() from tmio_mmc_host_probe() rather than pm_runtime_set_active(). Additionally, to avoid bumping usage counters and unnecessary re-initializing the HW the first time the tmio driver's ->runtime_resume() callback is called, introduce a state flag to keeping track of this. Cc: stable@vger.kernel.org Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
2019-04-15mmc: tmio: introduce macro for max block sizeWolfram Sang1-0/+2
We will need it later for other calculations. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-04-15mmc: renesas_sdhi: update copyright informationWolfram Sang1-2/+2
Mostly year updates, but one addition as well. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund@ragnatech.se> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2019-02-26mmc: tmio: fix access width of Block Count RegisterTakeshi Saito1-0/+5
In R-Car Gen2 or later, the maximum number of transfer blocks are changed from 0xFFFF to 0xFFFFFFFF. Therefore, Block Count Register should use iowrite32(). If another system (U-boot, Hypervisor OS, etc) uses bit[31:16], this value will not be cleared. So, SD/MMC card initialization fails. So, check for the bigger register and use apropriate write. Also, mark the register as extended on Gen2. Signed-off-by: Takeshi Saito <takeshi.saito.xv@renesas.com> [wsa: use max_blk_count in if(), add Gen2, update commit message] Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Cc: stable@kernel.org Reviewed-by: Simon Horman <horms+renesas@verge.net.au> [Ulf: Fixed build error] Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: tmio: introduce mask for 'always 1' bitsWolfram Sang1-0/+5
Some variants (namely Renesas SDHI) have bits in the STATS and IRQ_MASK registers which are 'always 1' and should be written as such. Introduce a seperate mask for this and apply it whenever such a register is written. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-12-17mmc: renesas_sdhi: add initial setting of interrupt mask registerNiklas Söderlund1-0/+1
The initial value of the interrupt mask register may be different from the H/W manual at the startup of the kernel by setting from the bootloader. Since the error interrupts may be unmasked, the driver sets initial value. The initial value is only known for R-Car Gen2 and Gen3 platforms so limit the initialization to those platforms. Based on work from Masaharu Hayakawa. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15mmc: tmio: simplify the DMA mode testMasahiro Yamada1-1/+1
host->chan_{rx,tx} represents the DMA capability of the platform. Even if DMA is supported, there are cases where we want to use PIO, for example, data length is short enough as commit 5f52c3552946 ("mmc: tmio: use PIO for short transfers") mentioned. Regarding the hardware control flow, we are interested in whether DMA is currently enabled or not, instead of whether the platform has the DMA capability. Hence, the several conditionals in tmio_mmc_core.c end up with checking host->chan_{rx,tx} and !host->force_pio. This is not nice. Let's flip the flag host->force_pio into host->dma_on. host->dma_on represents whether the DMA is currently enabled or not. This flag is set false in the beginning of each command, then should be set true by tmio_mmc_start_dma() when the DMA is turned on. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15mmc: tmio: remove TMIO_MMC_HAVE_HIGH_REG flagMasahiro Yamada1-3/+0
TMIO_MMC_HAVE_HIGH_REG is confusing due to its counter-intuitive name. All the TMIO MMC variants (TMIO MMC, Renesas SDHI, UniPhier SD) actually have high registers. It is just that each of them implements its own registers there. The original IP from Panasonic only defines registers 0x00-0xff in the bus_shift=1 review. The register area above them is platform-dependent. In fact, TMIO_MMC_HAVE_HIGH_REG is set only by tmio-mmc.c and used to test the accessibility of CTL_SDIO_REGS. Because it is specific to the TMIO MFD variant, the right thing to do is to move such registers to tmio_mmc.c and delete the TMIO_MMC_HAVE_HIGH_REG flag. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-15mmc: tmio: move MFD variant reset to a platform hookMasahiro Yamada1-0/+1
CTL_RESET_SDIO register is specific to the TMIO MFD (tmio_mmc.c). Add a new hook host->reset() for performing a platform-specific reset sequence, and move CTL_RESET_SDIO over there. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-08mmc: tmio: move tmio_mmc_set_clock() to platform hookMasahiro Yamada1-3/+1
tmio_mmc_set_clock() is full of quirks because different SoC vendors extended this in different ways. The original IP defines the divisor range 1/2 ... 1/512. bit 7 is set: 1/512 bit 6 is set: 1/256 ... bit 0 is set: 1/4 all bits clear: 1/2 It is platform-dependent how to achieve the 1/1 clock. I guess the TMIO-MFD variant uses the clock selector outside of this IP, as far as I see tmio_core_mmc_clk_div() in drivers/mfd/tmio_core.c I guess bit[7:0]=0xff is Renesas-specific extension. Socionext (and Panasonic) uses bit 10 (CLKSEL) for 1/1. Also, newer versions of UniPhier SoC variants use bit 16 for 1/1024. host->clk_update() is only used by the Renesas variants, whereas host->set_clk_div() is only used by the TMIO-MFD variants. To cope with this mess, promote tmio_mmc_set_clock() to a new platform hook ->set_clock(), and melt the old two hooks into it. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-10-08mmc: use SPDX identifier for Renesas driversWolfram Sang1-5/+1
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-07-16mmc: tmio: add eMMC HS400 mode supportMasaharu Hayakawa1-0/+6
This patch adds processing for selecting HS400 mode. Signed-off-by: Masaharu Hayakawa <masaharu.hayakawa.ry@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-18mmc: tmio: remove dma_ops from tmio_mmc_host_probe() argumentMasahiro Yamada1-2/+1
Drivers need to set up various struct members for tmio_mmc_host before calling tmio_mmc_host_probe(). Do likewise for host->dma_ops instead of passing it as a function argument. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2018-01-18mmc: tmio: move clk_enable/disable out of tmio_mmc_host_probe()Masahiro Yamada1-2/+2
The clock is enabled in the tmio_mmc_host_probe(). It also prevents drivers from performing platform-specific settings before mmc_add_host() because the register access generally requires a clock. Enable/disable the clock in drivers' probe/remove. Also, I passed tmio_mmc_data to tmio_mmc_host_alloc() because renesas_sdhi_clk_enable() needs it to get the private data from tmio_mmc_host. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-21mmc: tmio: use io* accessors consistentlyWolfram Sang1-6/+6
Because we started using io*_rep accessors previously because they are more widely defined across architectures, let's be consistent and use this family for all accessor wrappers. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-19mmc: tmio: change bus_shift to unsigned intMasahiro Yamada1-1/+1
Sane values for bus_shift are: 0 - for 16 bit bus 1 - for 32 bit bus 2 - for 64 bit bus "unsigned long" is too much. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-19mmc: tmio,renesas_sdhi: move ssc_tappos to renesas_sdhi.hMasahiro Yamada1-1/+0
struct tmio_mmc_host has "scc_tappos", but in fact, it is Renesas private data. Move it to renesas_sdhi.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-19mmc: tmio, renesas_sdhi: move Renesas-specific DMA data to renesas_sdhi.hMasahiro Yamada1-2/+0
struct tmio_mmc_host has "dma_dataend" and "dma_complete", but in fact, they are Renesas private data. Move them to renesas_sdhi.h Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-19mmc: tmio, renesas_sdhi: move struct tmio_mmc_dma to renesas_sdhi.hMasahiro Yamada1-7/+0
struct tmio_mmc_dma looks like TMIO core data, but in fact, Renesas private data. Move it to renesas_sdhi.h (probably, it is better to rename it to renesas_sdhi_dma, or squash it into struct renesas_sdhi). I also moved struct renesas_sdhi and host_to_priv() to that header because they are necessary to convert the tmio_mmc_host pointer into the renesas_sdhi pointer. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio, renesas_sdhi: set mmc_host_ops hooks directlyMasahiro Yamada1-3/+0
Drivers can set any mmc_host_ops hooks between tmio_mmc_host_alloc() and tmio_mmc_host_probe(). Remove duplicated hooks in tmio_mmc_host. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio: move mmc_host_ops to struct tmio_mmc_host from static dataMasahiro Yamada1-0/+1
Currently, tmio_mmc_ops is static data and tmio_mmc_host_probe() updates some hooks in the static data. This is a problem when two or more instances call tmio_mmc_host_probe() and each of them requests to use its own card_busy/start_signal_voltage_switch. We can borrow a solution from sdhci_alloc_host(). Copy the whole ops structure to host->mmc_host_ops, then override the hooks in malloc'ed data. Constify tmio_mmc_ops since it is now a template ops used by default. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-12-18mmc: tmio: use ioread* for repeated access to a registerWolfram Sang1-4/+4
Not all archs define reads* and writes*. Switch to ioread*_rep and friends which is defined everywhere, so we can enable COMPILE_TEST after that. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio: no magic values when enabling DMAWolfram Sang1-0/+3
Use a proper define. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio: add references to bit defines in the headerWolfram Sang1-0/+2
When defining bits, make sure we always have a reference to the register they belong to. For now, renaming all bits properly seems too intrusive, so at least make sure we have proper documentation. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio: remove obsolete TMIO_BBSWolfram Sang1-2/+0
Since commit 10c7fcbd0f00a0 ("ARM: shmobile: sh7372: Remove ZBOOT MMC/SDHI support"), this define is not needed anymore. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: renesas-sdhi: add support for R-Car Gen3 SDHI DMACSimon Horman1-0/+1
Add a new variant of the SDHI driver to support R-Car Gen3 with DMA via on-chip bus mastering. Since the DMAC is in a part of the SDHI module it is not suitable to be used via DMA Engine. Clearing of DM_CM_INFO1 after DMA thanks to Dirk Behme Cc: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com> Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-08-30mmc: tmio, renesas-sdhi: add dataend to DMA opsSimon Horman1-0/+1
Add dataend to DMA ops to allow DMAC implementation dependent handling of DMA data end. Also implement the operation for SDHI. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: tmio: improve checkpatch cleannessSimon Horman1-7/+10
Trivial updates to improve checkpatch cleanness. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: tmio, renesas-sdhi: update Renesas related copyrightsSimon Horman1-2/+3
Update copyrights to reflect work by Wolfram Sang and myself since last year. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: renesas-sdhi: rename tmio_mmc_dma.c => renesas_sdhi_sys_dmac.cSimon Horman1-9/+0
Rename the source file for DMA for SDHI as a follow-up to attaching DMA code to the SDHI driver rather than the tmio_core driver. The name "renesas" is chosen as the SDHI driver is applicable to a wider range of SoCs than SH-Mobile it seems to be a more appropriate name. However, the SDHI driver source itself, is left as sh_mobile_sdhi to avoid unnecessary churn. The name sys_dmac was chosen to reflect the type of DMA used. Internal symbols have also been renamed to reflect the filename change. A follow-up patch will re-organise the SDHI driver removing the need for renesas_sdhi_get_dma_ops(). Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: renesas-sdhi, tmio: make dma more modularSimon Horman1-33/+22
Refactor DMA support to allow it to be provided by a set of call-backs that are provided by a host driver. The motivation is to allow multiple DMA implementations to be provided and instantiated at run-time. Instantiate the existing DMA implementation from the sh_mobile_sdhi driver which appears to match the current use-case. This has the side effect of moving the DMA code from the tmio_core to the sh_mobile_sdhi driver. A follow-up patch will change the source file for the SDHI DMA implementation accordingly. Another follow-up patch will re-organise the SDHI driver removing the need for tmio_mmc_get_dma_ops(). Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-06-20mmc: tmio: drop filenames from comment at top of sourceSimon Horman1-4/+3
Reshuffle the comment at the top of the source dropping filenames and moving up human readable strings. This seems to be somewhat more useful information to start the source file with. It is also less fragile, f.e. to file renames. Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Arnd Bergmann <arnd@arndb.de> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: host: tmio: fix minor typos in commentsWolfram Sang1-3/+3
Making sure we match the actual register names. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: host: tmio: use defines for CTL_STOP_INTERNAL_ACTION valuesWolfram Sang1-0/+4
Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-04-24mmc: tmio: ensure end of DMA and SD access are in syncWolfram Sang1-1/+1
The current code assumes that DMA is finished before SD access end is flagged. Thus, it schedules the 'dma_complete' tasklet in the SD card interrupt routine when DATAEND is set. The assumption is not safe, though. Even by mounting an SD card, it can be seen that sometimes DMA complete is first, sometimes DATAEND. It seems they are usually close enough timewise to not cause problems. However, a customer reported that with CMD53 sometimes things really break apart. As a result, the BSP has a patch which introduces flags for both events and makes sure both flags are set before scheduling the tasklet. The customer accepted the patch, yet it doesn't seem a proper upstream solution to me. This patch refactors the code to replace the tasklet with already existing and more lightweight mechanisms. First of all, we set the callback in a DMA descriptor to automatically get notified when DMA is done. In the callback, we then use a completion to make sure the SD access has already ended. Then, we proceed as before. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: tmio: discard obsolete SDIO irqs before enabling irqsWolfram Sang1-0/+2
Before enabling SDIO irqs, clear the status bit, so we discard old and stale interrupts. Needed to get two wireless cards working. Use the newly introduced macro in all places. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2017-02-13mmc: host: Include interrupt.h in mmc host drivers that depends on itUlf Hansson1-0/+1
An mmc host driver shouldn't rely on interrupt.h being included by another public mmc header. Instead make that dependency explicit by including interrupt.h in those host drivers that depends on it. Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-29mmc: tmio: Add tuning supportAi Kyuse1-0/+14
Add tuning support for use with SDR104 mode Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: tmio: Add hw reset supportAi Kyuse1-0/+1
Add hw reset support. Signed-off-by: Ai Kyuse <ai.kyuse.uw@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: tmio: document mandatory and optional callbacksSimon Horman1-1/+4
Signed-off-by: Simon Horman <horms+renesas@verge.net.au> Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-11-29mmc: tmio-mmc: add support for 32bit data portChris Brandt1-0/+12
For the r7s72100 SOC, the DATA_PORT register was changed to 32-bits wide. Therefore a new flag has been created that will allow 32-bit reads/writes to the DATA_PORT register instead of 16-bit (because 16-bits accesses are not supported). Signed-off-by: Chris Brandt <chris.brandt@renesas.com> Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-26mmc: tmio: add eMMC supportWolfram Sang1-0/+3
We need to add R1 without CRC support, refactor the bus width routine a little and extend a quirk check. To support "non-removable;" we need a workaround which will be hopefully removed when reworking PM soon. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-09-26mmc: host: sh_mobile_sdhi: move card_busy from tmio to sdhiWolfram Sang1-0/+1
card_busy is only used/tested on SDHI for R-Car Gen2 and later. Move it to the SDHI driver, so we can then activate it conditionally depending on the SDHI type. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Tested-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-07-25mmc: tmio: make a cast explicitWolfram Sang1-1/+1
Sparse complains about the implicit cast. Making it explicit is indeed better coding style. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-02mmc: tmio: document CTL_STATUS handlingWolfram Sang1-1/+2
Now that reading CTL_STATUS is consistent, we can remove CTL_STATUS2 and document how this is handled internally. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-02mmc: tmio/sdhi: distinguish between SCLKDIVEN and ILL_FUNCWolfram Sang1-1/+2
This bit has a different meaning in SDHI and original TMIO. Document that and use the proper naming. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-02mmc: tmio: use CTL_STATUS consistentlyWolfram Sang1-2/+1
To prevent confusion, use the virtual u32 CTL_STATUS in card_busy() the same way as in other parts of this driver. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-02mmc: tmio: use BIT() within definesWolfram Sang1-21/+23
BIT() makes it easier to match the bits to the datasheet. This is especially important here, since some variants have different names in their datasheets (like with Renesas R-Car). Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-02mmc: tmio: give read32/write32 functions more descriptive namesWolfram Sang1-3/+2
Looking at the backlogs, I am not the only one who missed that the above functions do not read u32 from one register, but create a virtual u32 from reading to adjacent u16 registers (which depending on 'bus_shift' can be up to 8 byte apart). Because this driver supports old hardware for which we don't have documentation, I first wrongly assumed there was a variant which had a few u32 registers. Let's give the functions more descriptive names to make it more obvious what is happening. Reviewed-by: Simon Horman <horms+renesas@verge.net.au> Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
2016-05-02mmc: tmio: merge distributed include filesWolfram Sang1-1/+55
There is no reason to have a public and private header file. Merge them into a private one, so looking up symbols is less confusing. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-20 22:08:47 +0300