summaryrefslogtreecommitdiff
path: root/drivers/media
AgeCommit message (Collapse)AuthorFilesLines
2021-02-22Merge tag 'media/v5.12-1' of ↵Linus Torvalds194-2872/+23944
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - some core fixes in VB2 mem2mem support - some improvements and cleanups in V4L2 async kAPI - newer controls in V4L2 API for H-264 and HEVC codecs - allegro-dvt driver was promoted from staging - new i2c sendor drivers: imx334, ov5648, ov8865 - new automobile camera module: rdacm21 - ipu3 cio2 driver started gained support for some ACPI BIOSes - new ATSC frontend: MaxLinear mxl692 VSB tuner/demod - the SMIA/CCS driver gained more support for CSS standard - several driver fixes, updates and improvements * tag 'media/v5.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (362 commits) media: v4l: async: Fix kerneldoc documentation for async functions media: i2c: max9271: Add MODULE_* macros media: i2c: Kconfig: Make MAX9271 a module media: imx334: 'ret' is uninitialized, should have been PTR_ERR() media: i2c: Add imx334 camera sensor driver media: dt-bindings: media: Add bindings for imx334 media: ov8856: Configure sensor for GRBG Bayer for all modes media: i2c: imx219: Implement V4L2_CID_LINK_FREQ control media: ov5675: fix vflip/hflip control media: ipu3-cio2: Build bridge only if ACPI is enabled media: Remove the legacy v4l2-clk API media: ov6650: Use the generic clock framework media: mt9m111: Use the generic clock framework media: ov9640: Use the generic clock framework media: pxa_camera: Drop the v4l2-clk clock register media: mach-pxa: Register the camera sensor fixed-rate clock media: i2c: imx258: get clock from device properties and enable it via runtime PM media: i2c: imx258: simplify getting state container media: i2c: imx258: add support for binding via device tree media: dt-bindings: media: imx258: add bindings for IMX258 sensor ...
2021-02-11media: i2c: max9271: Add MODULE_* macrosJacopo Mondi1-0/+5
Since commit 7f03d9fefcc5 ("media: i2c: Kconfig: Make MAX9271 a module") the max9271 library is built as a module but no MODULE_*() attributes were specified, causing a build error due to missing license information. ERROR: modpost: missing MODULE_LICENSE() in drivers/media/i2c/max9271.o Fix this by adding MODULE attributes to the driver. Fixes: 7f03d9fefcc5 ("media: i2c: Kconfig: Make MAX9271 a module") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reported-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-09media: i2c: Kconfig: Make MAX9271 a moduleJacopo Mondi2-4/+8
With the introduction of the RDACM21 camera module support in commit a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") the symbols defined by the max9271 library were exported twice if multiple users of the library were compiled in at the same time. In example: WARNING: modpost: drivers/media/i2c/rdacm21-camera_module: 'max9271_set_serial_link' exported twice. Previous export was in drivers/media/i2c/rdacm20-camera_module.ko Fix this by making the max9271 file a module and have the driver using its functions select it. Fixes: a59f853b3b4b ("media: i2c: Add driver for RDACM21 camera module") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Mauro Carvalho Chehab <mchehab@kernel.org> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-09media: imx334: 'ret' is uninitialized, should have been PTR_ERR()Hans Verkuil1-1/+2
Fix this compiler warning: drivers/media/i2c/imx334.c: In function 'imx334_parse_hw_config': include/linux/dev_printk.h:112:2: warning: 'ret' may be used uninitialized in this function [-Wmaybe-uninitialized] 112 | _dev_err(dev, dev_fmt(fmt), ##__VA_ARGS__) | ^~~~~~~~ drivers/media/i2c/imx334.c:783:6: note: 'ret' was declared here 783 | int ret; | ^~~ Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: Add imx334 camera sensor driverMartina Krasteva3-0/+1146
Add a v4l2 sub-device driver for the Sony imx334 image sensor. This is a camera sensor using the i2c bus for control and the csi-2 bus for data. The following features are supported: - manual exposure and analog gain control support - vblank/hblank/pixel rate/link freq control support - supported resolution: - 3840x2160 @ 60fps - supported bayer order output: - SRGGB12 Signed-off-by: Martina Krasteva <martinax.krasteva@intel.com> Reviewed-by: Gjorgji Rosikopulos <gjorgjix.rosikopulos@intel.com> Acked-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com> Acked-by: Paul J. Murphy <paul.j.murphy@intel.com> Reviewed-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: ov8856: Configure sensor for GRBG Bayer for all modesRobert Foss1-2/+2
The previously added modes 3264x2448 & 1632x1224 are actually configuring the sensor for BGGR mode, this is an issue since the mode that is exposed through V4L incorrectly is set as GRBG. This patch fixes the issue by moving the output crop window of internal sensor ISP uses by one row, which means that the Bayer pattern of the output is changed. row 1: B G B G B G ... row 2: G R G R G R ... row 3: B G B G B G ... ... row 2: G R G R G R ... row 3: B G B G B G ... ... Signed-off-by: Robert Foss <robert.foss@linaro.org> Suggested-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Andrey Konovalov <andrey.konovalov@linaro.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: imx219: Implement V4L2_CID_LINK_FREQ controlAndrey Konovalov1-1/+14
This control is needed for imx219 driver, as the link frequency is independent from the pixel rate in this case, and can't be calculated from the pixel rate. Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: ov5675: fix vflip/hflip controlShawn Tu1-3/+3
Set/clear the bits to configure the register to expected value to assume the v/hflip state. Signed-off-by: Shawn Tu <shawnx.tu@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: ipu3-cio2: Build bridge only if ACPI is enabledSakari Ailus1-1/+1
ipu3-cio2-bridge uses several features of the ACPI framework that have no meaningful replacement when ACPI is disabled. Instead of adding #ifdefs to the affected places, only build the bridge code if CONFIG_ACPI is enabled. Fixes: 803abec64ef9 ("media: ipu3-cio2: Add cio2-bridge to ipu3-cio2 driver") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reported-by: Randy Dunlap <rdunlap@infradead.org> Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: Remove the legacy v4l2-clk APIEzequiel Garcia2-322/+1
The V4L2 temporary clock helper API, was introduced in late 2012 and, as mentioned in the documentation, meant to be replaced by the generic clock API, once the generic clock framework became available on all relevant architectures. The generic clock API is a well-established API (since a few years now). The last few media capture drivers and sensors using v4l2-clk have been converted to the generic clock framework. We can now remove the v4l2-clk API. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Acked-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: ov6650: Use the generic clock frameworkEzequiel Garcia1-17/+11
Commit ce548396a433 ("media: mach-omap1: board-ams-delta.c: remove soc_camera dependencies") removed the last in-tree user of this sensor. New users will be required to use the generic clock framework, so it's possible to convert the driver to use it. Convert the driver to use the CCF, and drop the legacy v4l2-clk API. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Janusz Krzysztofik <jmkrzyszt@gmail.com> Reviewed-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: mt9m111: Use the generic clock frameworkEzequiel Garcia1-10/+7
This sensor driver has a proper device-tree binding, and also all its platform-data based in-tree users have been converted to use the generic clock framework. Convert the driver to use the CCF, and drop the legacy v4l2-clk API. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: ov9640: Use the generic clock frameworkEzequiel Garcia2-10/+7
Commit 63839882c597 ("media: mach-pxa: palmz72/pcm990: remove soc_camera dependencies") removed the last in-tree user of this sensor. New users will be required to use the generic clock framework, so it's possible to convert the driver to use it. Convert the driver to use the CCF, and drop the legacy v4l2-clk API. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Acked-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: pxa_camera: Drop the v4l2-clk clock registerEzequiel Garcia1-29/+1
Now that mach-based PXA platforms are registering proper fixed-rate clocks through the CCF, the v4l2-clk clock is no longer required. Drop this clock, so the driver no longer depends on the legacy v4l2-clk API. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Acked-by: Petr Cvek <petrcvekcz@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: imx258: get clock from device properties and enable it via ↵Krzysztof Kozlowski1-8/+61
runtime PM The IMX258 sensor driver checked in device properties for a clock-frequency property which actually does not mean that the clock is really running such frequency or is it even enabled. Get the provided clock and check it frequency. If none is provided, fall back to old property. Enable the clock when accessing the IMX258 registers and when streaming starts with runtime PM. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: imx258: simplify getting state containerKrzysztof Kozlowski1-4/+2
The pointer to 'struct v4l2_subdev' is stored in drvdata via v4l2_i2c_subdev_init() so there is no point of a dance like: struct i2c_client *client = to_i2c_client(struct device *dev) struct v4l2_subdev *sd = i2c_get_clientdata(client); This allows to remove local variable 'client' and few pointer dereferences. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: imx258: add support for binding via device treeKrzysztof Kozlowski1-0/+7
The IMX258 can be used also on embedded designs using device tree so allow the sensor to bind to a device tree node. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: rdacm20: Constify static structsRikard Falkeborn1-2/+2
The only usage of rdacm20_video_ops is to assign it to the video field in the v4l2_subdev_ops struct which is a pointer to const, and the only usage of rdacm20_subdev_ops is to pass its address to v4l2_i2c_subdev_init() which accepts a pointer to const. Make them const to allow the compiler to put them in read-only memory. Signed-off-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Acked-by: Jacopo Mondi <jacopo@jmondi.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: max9286: Configure reverse channel amplitudeJacopo Mondi1-1/+22
Adjust the initial reverse channel amplitude parsing from firmware interface the 'maxim,reverse-channel-microvolt' property. This change is required for both rdacm20 and rdacm21 camera modules to be correctly probed when used in combination with the max9286 deserializer. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: max9286: Make channel amplitude programmableJacopo Mondi1-6/+15
Instrument the function that configures the reverse channel with a programmable amplitude value. This change serves to prepare to adjust the reverse channel amplitude depending on the remote end high-threshold configuration. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: max9286: Break-out reverse channel setupJacopo Mondi1-13/+17
Break out the reverse channel setup configuration procedure to its own function. This change prepares for configuring the reverse channel conditionally to the remote side high threshold configuration. No functional changes intended. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesasa@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: Add driver for RDACM21 camera moduleJacopo Mondi3-0/+638
The RDACM21 is a GMSL camera supporting 1280x1080 resolution images developed by IMI based on an Omnivision OV10640 sensor, an Omnivision OV490 ISP and a Maxim MAX9271 GMSL serializer. The driver uses the max9271 library module, to maximize code reuse with other camera module drivers using the same serializer, such as rdacm20. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: marvell-ccic: power up the device on mclk enableLubomir Rintel1-0/+2
Writing to REG_CLKCTRL with the power off causes a hang. Enable the device first. Cc: stable@vger.kernel.org # 5.10+ Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: v4l2-async: Improve v4l2_async_notifier_add_*_subdev() APILaurent Pinchart26-99/+85
The functions that add an async subdev to an async subdev notifier take as an argument the size of the container structure they need to allocate. This is error prone, as passing an invalid size will not be caught by the compiler. Wrap those functions in macros that take a container type instead of a size, and cast the returned pointer to the desired type. The compiler will catch mistakes if the incorrect type is passed to the macro, as the assignment types won't match. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> (core+ti-cal) Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: v4l2-async: Discourage use of v4l2_async_notifier_add_subdevEzequiel Garcia2-5/+5
Most -if not all- use-cases are expected to be covered by one of: v4l2_async_notifier_add_fwnode_subdev, v4l2_async_notifier_add_fwnode_remote_subdev or v4l2_async_notifier_add_i2c_subdev. We'd like to discourage drivers from using v4l2_async_notifier_add_subdev, so rename it as __v4l2_async_notifier_add_subdev. This is typically a good hint for drivers to avoid using the function. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: davinci: vpif_display: Remove unused v4l2-async codeEzequiel Garcia2-72/+15
There are no users for vpif_display_config.asd_sizes and vpif_display_config.asd members, which means the v4l2-async subdevices aren't being defined anywhere. Remove the v4l2-async, leaving only the synchronous setup. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: pxa-camera: Use v4l2_async_notifier_add_*_subdevEzequiel Garcia1-34/+23
The use of v4l2_async_notifier_add_subdev will be discouraged. Drivers are instead encouraged to use a helper such as v4l2_async_notifier_add_fwnode_remote_subdev. This fixes a misuse of the API, as v4l2_async_notifier_add_subdev should get a kmalloc'ed struct v4l2_async_subdev. Use the appropriate helper: v4l2_async_notifier_add_i2c_subdev or v4l2_async_notifier_add_fwnode_remote_subdev, which handles the needed setup, instead of open-coding it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: renesas-ceu: Use v4l2_async_notifier_add_*_subdevEzequiel Garcia1-33/+27
The use of v4l2_async_notifier_add_subdev will be discouraged. Drivers are instead encouraged to use a helper such as v4l2_async_notifier_add_i2c_subdev. This fixes a misuse of the API, as v4l2_async_notifier_add_subdev should get a kmalloc'ed struct v4l2_async_subdev, removing some boilerplate code while at it. Use the appropriate helper: v4l2_async_notifier_add_i2c_subdev or v4l2_async_notifier_add_fwnode_remote_subdev, which handles the needed setup, instead of open-coding it. Using v4l2-async to allocate the driver-specific structs, requires to change struct ceu_subdev so the embedded struct v4l2_async_subdev is now the first element. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: marvell-ccic: Use v4l2_async_notifier_add_*_subdevEzequiel Garcia4-17/+19
The use of v4l2_async_notifier_add_subdev will be discouraged. Drivers are instead encouraged to use a helper such as v4l2_async_notifier_add_fwnode_remote_subdev. This fixes a misuse of the API, as v4l2_async_notifier_add_subdev should get a kmalloc'ed struct v4l2_async_subdev, removing some boilerplate code while at it. Use the appropriate helper: v4l2_async_notifier_add_i2c_subdev or v4l2_async_notifier_add_fwnode_remote_subdev, which handles the needed setup, instead of open-coding it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: cadence: Use v4l2_async_notifier_add_fwnode_remote_subdevEzequiel Garcia1-10/+6
The use of v4l2_async_notifier_add_subdev will be discouraged. Drivers are instead encouraged to use a helper such as v4l2_async_notifier_add_fwnode_remote_subdev. This fixes a misuse of the API, as v4l2_async_notifier_add_subdev should get a kmalloc'ed struct v4l2_async_subdev, removing some boilerplate code while at it. Use the appropriate helper v4l2_async_notifier_add_fwnode_remote_subdev, which handles the needed setup, instead of open-coding it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: st-mipid02: Use v4l2_async_notifier_add_fwnode_remote_subdevEzequiel Garcia1-11/+10
The use of v4l2_async_notifier_add_subdev will be discouraged. Drivers are instead encouraged to use a helper such as v4l2_async_notifier_add_fwnode_remote_subdev. This fixes a misuse of the API, as v4l2_async_notifier_add_subdev should get a kmalloc'ed struct v4l2_async_subdev, removing some boilerplate code while at it. Use the appropriate helper v4l2_async_notifier_add_fwnode_remote_subdev, which handles the needed setup, instead of open-coding it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: exynos4-is: Use v4l2_async_notifier_add_fwnode_remote_subdevEzequiel Garcia2-12/+14
The use of v4l2_async_notifier_add_subdev will be discouraged. Drivers are instead encouraged to use a helper such as v4l2_async_notifier_add_fwnode_remote_subdev. This fixes a misuse of the API, as v4l2_async_notifier_add_subdev should get a kmalloc'ed struct v4l2_async_subdev, removing some boilerplate code while at it. Use the appropriate helper v4l2_async_notifier_add_fwnode_remote_subdev, which handles the needed setup, instead of open-coding it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: stm32: Use v4l2_async_notifier_add_fwnode_remote_subdevEzequiel Garcia1-56/+30
The use of v4l2_async_notifier_add_subdev will be discouraged. Drivers are instead encouraged to use a helper such as v4l2_async_notifier_add_fwnode_remote_subdev. This fixes a misuse of the API, as v4l2_async_notifier_add_subdev should get a kmalloc'ed struct v4l2_async_subdev, removing some boilerplate code while at it. Use the appropriate helper v4l2_async_notifier_add_fwnode_remote_subdev, which handles the needed setup, instead of open-coding it. This results in removal of the now unneeded driver-specific state struct dcmi_graph_entity, keeping track of just the source subdevice. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: atmel: Use v4l2_async_notifier_add_fwnode_remote_subdevEzequiel Garcia3-62/+29
The use of v4l2_async_notifier_add_subdev will be discouraged. Drivers are instead encouraged to use a helper such as v4l2_async_notifier_add_fwnode_remote_subdev. This fixes a misuse of the API, as v4l2_async_notifier_add_subdev should get a kmalloc'ed struct v4l2_async_subdev, removing some boilerplate code while at it. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: v4l2-async: Clean v4l2_async_notifier_add_fwnode_remote_subdevEzequiel Garcia7-91/+68
Change v4l2_async_notifier_add_fwnode_remote_subdev semantics so it allocates the struct v4l2_async_subdev pointer. This makes the API consistent: the v4l2-async subdevice addition functions have now a unified usage model. This model is simpler, as it makes v4l2-async responsible for the allocation and release of the subdevice descriptor, and no longer something the driver has to worry about. On the user side, the change makes the API simpler for the drivers to use and less error-prone. Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: ov5648: remove unnecessary NULL checkDan Carpenter1-1/+1
The "mode_index == ARRAY_SIZE(ov5648_modes)" check ensures that we exited the loop via a break statement so we know that "mode" must be valid. Delete this unnecessary NULL check. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: max9286: fix access to unallocated memoryTomi Valkeinen1-1/+1
The asd allocated with v4l2_async_notifier_add_fwnode_subdev() must be of size max9286_asd, otherwise access to max9286_asd->source will go to unallocated memory. Fixes: 86d37bf31af6 ("media: i2c: max9286: Allocate v4l2_async_subdev dynamically") Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com> Cc: stable@vger.kernel.org # v5.10+ Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Tested-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: ipu3-cio2: Do not zero reserved fieldsRicardo Ribalda1-3/+0
Core code already clears reserved fields of struct v4l2_pix_format_mplane, check commit 4e1e0eb0e074 ("media: v4l2-ioctl: Zero v4l2_plane_pix_format reserved fields"). Signed-off-by: Ricardo Ribalda <ribalda@chromium.org> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: v4l2-async: Remove V4L2_ASYNC_MATCH_DEVNAMEEzequiel Garcia1-41/+0
The last user for this type of match was the soc-camera/sh_mobile_csi2 driver, which was removed in v4.9. If the support is ever needed, it can always be restored. [Sakari Ailus: Also drop DEVNAME from debug prints recently added.] Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: i2c: fix spelling mistakes: "enpoint" -> "endpoint"Colin Ian King2-2/+2
There are two spelling mistakes in dev_err messages. Fix these. Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: uvc: strncpy -> strscpyHans Verkuil1-1/+1
The use of strncpy is discouraged, use strscpy instead. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: vidtv: adapter->mdev was set too lateHans Verkuil1-8/+10
The media device has to be initialized and assigned to adapter->mdev before the dvb devices are created, since that will trigger the automatic creation of the topology. Rework this code to achieve this. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: media/pci: fix spelling typo of frimwaredingsenjie1-1/+1
frimware -> firmware Signed-off-by: dingsenjie <dingsenjie@yulong.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: smipcie: fix interrupt handling and IR timeoutSean Young1-20/+26
After the first IR message, interrupts are no longer received. In addition, the code generates a timeout IR message of 10ms but sets the timeout value to 100ms, so no timeout was ever generated. Link: https://bugzilla.kernel.org/show_bug.cgi?id=204317 Fixes: a49a7a4635de ("media: smipcie: add universal ir capability") Tested-by: Laz Lev <lazlev@web.de> Cc: stable@vger.kernel.org # v5.1+ Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: em28xx: Add support for Hauppauge USB QuadHDBrad Love4-0/+74
Hauppauge USB QuadHD contains two two-tuner em28xx devices behind a usb hub. Each of the four dvb adapters contains a MaxLinear 692 combo ATSC demod/tuner. Bus 003 Device 006: ID 2040:846d Hauppauge Bus 003 Device 005: ID 2040:846d Hauppauge Bus 003 Device 004: ID 04e2:0404 Exar Corp. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: em28xx-core: Fix i2c error debugBrad Love1-1/+5
Read errors are currently reported as write errors. An incorrectly received read operation is never reported at all. Add a debug statement indicating the request mismatch. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: em28xx-core: Fix TS2 active ledBrad Love1-1/+3
TS2 active led is completely igored, fix that. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-06media: mxl692: MaxLinear 692 ATSC demod/tuner driverBrad Love5-0/+1974
MaxLinear 692 is a combo demod/tuner which has ATSC and QAM capabilities. Only ATSC is currently advertised via DVB properties. QAM still has issues. Confirmed working on both big and little endian. Big endian verified on PowerPC Mac mini. Signed-off-by: Brad Love <brad@nextdimension.cc> Signed-off-by: Sean Young <sean@mess.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2021-02-01Merge tag 'v5.11-rc6' into patchworkMauro Carvalho Chehab12-21/+17
Linux 5.11-rc6 * tag 'v5.11-rc6': (1466 commits) Linux 5.11-rc6 leds: rt8515: Add Richtek RT8515 LED driver dt-bindings: leds: Add DT binding for Richtek RT8515 leds: trigger: fix potential deadlock with libata leds: leds-ariel: convert comma to semicolon leds: leds-lm3533: convert comma to semicolon dt-bindings: Cleanup standard unit properties soc: litex: Properly depend on HAS_IOMEM tty: avoid using vfs_iocb_iter_write() for redirected console writes null_blk: cleanup zoned mode initialization cifs: fix dfs domain referrals drm/nouveau/kms/gk104-gp1xx: Fix > 64x64 cursors drm/nouveau/kms/nv50-: Report max cursor size to userspace drivers/nouveau/kms/nv50-: Reject format modifiers for cursor planes drm/nouveau/svm: fail NOUVEAU_SVM_INIT ioctl on unsupported devices drm/nouveau/dispnv50: Restore pushing of all data. io_uring: reinforce cancel on flush during exit cifs: returning mount parm processing errors correctly rxrpc: Fix memory leak in rxrpc_lookup_local mlxsw: spectrum_span: Do not overwrite policer configuration ...
2021-01-28media: rockchip: rkisp1: extend uapi array sizesHeiko Stuebner2-3/+3
Later variants of the rkisp1 block use more entries in some arrays: RKISP1_CIF_ISP_AE_MEAN_MAX 25 -> 81 RKISP1_CIF_ISP_HIST_BIN_N_MAX 16 -> 32 RKISP1_CIF_ISP_GAMMA_OUT_MAX_SAMPLES 17 -> 34 RKISP1_CIF_ISP_HISTOGRAM_WEIGHT_GRIDS_SIZE 25 -> 81 and we can still extend the uapi during the 5.11-rc cycle, so do that now to be on the safe side. V10 and V11 only need the smaller sizes, while V12 and V13 needed the larger sizes. When adding the bigger sizes make sure, values filled from hardware values and transmitted to userspace don't leak kernel data by zeroing them beforehand. Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Ezequiel Garcia <ezequiel@collabora.com> Acked-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-02-18 21:52:06 +0300