summaryrefslogtreecommitdiff
path: root/drivers/media/v4l2-core
AgeCommit message (Collapse)AuthorFilesLines
2020-09-03Merge tag 'media/v5.9-2' of ↵Linus Torvalds1-23/+27
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media fixes from Mauro Carvalho Chehab: - a compilation fix issue with ti-vpe on arm 32 bits - two Kconfig fixes for imx214 and max9286 drivers - a kernel information leak at v4l2-core on time32 compat ioctls - some fixes at rc core unbind logic - a fix at mceusb driver for it to not use GFP_ATOMIC - fixes at cedrus and vicodec drivers at the control handling logic - a fix at gpio-ir-tx to avoid disabling interruts on a spinlock * tag 'media/v5.9-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: media: mceusb: Avoid GFP_ATOMIC where it is not needed media: gpio-ir-tx: spinlock is not needed to disable interrupts media: rc: do not access device via sysfs after rc_unregister_device() media: rc: uevent sysfs file races with rc_unregister_device() media: max9286: Depend on OF_GPIO media: i2c: imx214: select V4L2_FWNODE media: cedrus: Add missing v4l2_ctrl_request_hdl_put() media: vicodec: add missing v4l2_ctrl_request_hdl_put() media: media/v4l2-core: Fix kernel-infoleak in video_put_user() media: ti-vpe: cal: Fix compilation on 32-bit ARM
2020-08-26media: media/v4l2-core: Fix kernel-infoleak in video_put_user()Peilin Ye1-23/+27
video_put_user() is copying uninitialized stack memory to userspace due to the compiler not initializing holes in the structures declared on the stack. Fix it by initializing `ev32` and `vb32` using memset(). Reported-and-tested-by: syzbot+79d751604cb6f29fbf59@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=79d751604cb6f29fbf59 Cc: stable@vger.kernel.org Fixes: 1a6c0b36dd19 ("media: v4l2-core: fix VIDIOC_DQEVENT for time64 ABI") Fixes: 577c89b0ce72 ("media: v4l2-core: fix v4l2_buffer handling for time64 ABI") Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-08-24treewide: Use fallthrough pseudo-keywordGustavo A. R. Silva3-4/+2
Replace the existing /* fall through */ comments and its variants with the new pseudo-keyword macro fallthrough[1]. Also, remove unnecessary fall-through markings when it is the case. [1] https://www.kernel.org/doc/html/v5.7/process/deprecated.html?highlight=fallthrough#implicit-switch-case-fall-through Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
2020-07-19media: v4l2-async: Log message in case of heterogeneous fwnode matchLaurent Pinchart1-1/+23
When a notifier supplies a device fwnode and a subdev supplies an endpoint fwnode, incorrect matches may occur if multiple subdevs correspond to the same device fwnode. This can't be handled transparently in the framework, and requires the notifier to switch to endpoint fwnodes. Log a message to notify of this problem. A second message is added to help accelerating the transition to endpoint matching. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: v4l2-async: Pass notifier pointer to match functionsLaurent Pinchart1-7/+11
The notifier is useful to match functions to access information about the device matching a subdev. This will be used to print messages using the correct struct device and driver name. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: v4l2-async: Accept endpoints and devices for fwnode matchingLaurent Pinchart1-1/+42
fwnode matching was designed to match on nodes corresponding to a device. Some drivers, however, needed to match on endpoints, and have passed endpoint fwnodes to v4l2-async. This works when both the subdev and the notifier use the same fwnode types (endpoint or device), but makes drivers that use different types incompatible. Fix this by extending the fwnode match to handle fwnodes of different types. When the types (deduced from the presence of remote endpoints) are different, retrieve the device fwnode for the side that provides an endpoint fwnode, and compare it with the device fwnode provided by the other side. This allows interoperability between all drivers, regardless of which type of fwnode they use for matching. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Tested-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com> Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Reviewed-by: Jacopo Mondi <jacopo+renesas@jmondi.org> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19media: Add V4L2_TYPE_IS_CAPTURE helperEzequiel Garcia1-3/+3
It's all too easy to get confused by the V4L2_TYPE_IS_OUTPUT macro, when it's used as !V4L2_TYPE_IS_OUTPUT. Reduce the risk of confusion with macro to explicitly check for the CAPTURE queue type case. This change does not affect functionality, and it's only intended to make the code more readable. Suggested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> [hverkuil-cisco@xs4all.nl: checkpatch: align with parenthesis] Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-07-19v4l2-core: Print control name in VIDIOC_S/G_(EXT)_CTRL(S)Ezequiel Garcia1-4/+10
While debugging, it's currently really hard to identify controls by their ID. Print the control name making the print more helpful. With this change, the print changes from: video1: VIDIOC_S_EXT_CTRLS: which=0xf010000, count=5, error_idx=4, request_fd=45, id/size=0x990ce8/1048, id/size=0x990ce9/12, id/size=0x990cea/480, id/size=0x990ceb/896, id/size=0x990cec/400 video1: VIDIOC_S_EXT_CTRLS: which=0xf010000, count=5, error_idx=4, request_fd=42, name=H264 Sequence Parameter Set, id/size=0x990ce8/1048, name=H264 Picture Parameter Set, id/size=0x990ce9/12, name=H264 Scaling Matrix, id/size=0x990cea/480, name=H264 Slice Parameters, id/size=0x990ceb/896, name=H264 Decode Parameters, id/size=0x990cec/400 For instance, this is specially helpful when the ioctl fails. Consider the following example: v4l2-ctrls: prepare_ext_ctrls: video1: pointer control id 0x990cec size too small, 400 bytes but 784 bytes needed v4l2-ctrls: try_set_ext_ctrls: video1: video1: try_set_ext_ctrls_common failed (-14) video1: VIDIOC_S_EXT_CTRLS: error -14: which=0xf010000, count=5, error_idx=5, request_fd=39, name=H264 Sequence Parameter Set, id/size=0x990ce8/1048, name=H264 Picture Parameter Set, id/size=0x990ce9/12, name=H264 Scaling Matrix, id/size=0x990cea/480, name=H264 Slice Parameters, id/size=0x990ceb/896, name=H264 Decode Parameters, id/size=0x990cec/400 Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-23media: videobuf2: handle V4L2_FLAG_MEMORY_NON_CONSISTENT flagSergey Senozhatsky2-6/+9
This patch lets user-space to request a non-consistent memory allocation during CREATE_BUFS and REQBUFS ioctl calls. = CREATE_BUFS struct v4l2_create_buffers has seven 4-byte reserved areas, so reserved[0] is renamed to ->flags. The struct, thus, now has six reserved 4-byte regions. = CREATE_BUFS32 struct v4l2_create_buffers32 has seven 4-byte reserved areas, so reserved[0] is renamed to ->flags. The struct, thus, now has six reserved 4-byte regions. = REQBUFS We use one bit of a ->reserved[1] member of struct v4l2_requestbuffers, which is now renamed to ->flags. Unlike v4l2_create_buffers, struct v4l2_requestbuffers does not have enough reserved room. Therefore for backward compatibility ->reserved and ->flags were put into anonymous union. Signed-off-by: Sergey Senozhatsky <senozhatsky@chromium.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-13Merge tag 'media/v5.8-2' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull more media updates from Mauro Carvalho Chehab: - a set of atomisp patches. They remove several abstraction layers, and fixes clang and gcc warnings (that were hidden via some macros that were disabling 4 or 5 types of warnings there). There are also some important fixes and sensor auto-detection on newer BIOSes via ACPI _DCM tables. - some fixes * tag 'media/v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (95 commits) media: rkvdec: Fix H264 scaling list order media: v4l2-ctrls: Unset correct HEVC loop filter flag media: videobuf2-dma-contig: fix bad kfree in vb2_dma_contig_clear_max_seg_size media: v4l2-subdev.rst: correct information about v4l2 events media: s5p-mfc: Properly handle dma_parms for the allocated devices media: medium: cec: Make MEDIA_CEC_SUPPORT default to n if !MEDIA_SUPPORT media: cedrus: Implement runtime PM media: cedrus: Program output format during each run media: atomisp: improve ACPI/DMI detection logs media: Revert "media: atomisp: add Asus Transform T101HA ACPI vars" media: Revert "media: atomisp: Add some ACPI detection info" media: atomisp: improve sensor detection code to use _DSM table media: atomisp: get rid of an iomem abstraction layer media: atomisp: get rid of a string_support.h abstraction layer media: atomisp: use strscpy() instead of less secure variants media: atomisp: set DFS to MAX if sensor doesn't report fps media: atomisp: use different dfs failed messages media: atomisp: change the detection of ISP2401 at runtime media: atomisp: use macros from intel-family.h media: atomisp: don't set hpll_freq twice with different values ...
2020-06-11media: v4l2-ctrls: Unset correct HEVC loop filter flagJonas Karlman1-1/+1
Wrong loop filter flag is unset when tiles enabled flag is not set, this cause HEVC decoding issues with Rockchip Video Decoder. Fix this by unsetting the loop filter across tiles enabled flag instead of the pps loop filter across slices enabled flag when tiles are disabled. Fixes: 256fa3920874 ("media: v4l: Add definitions for HEVC stateless decoding") Signed-off-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-06-09mmap locking API: convert mmap_sem commentsMichel Lespinasse1-1/+1
Convert comments that reference mmap_sem to reference mmap_lock instead. [akpm@linux-foundation.org: fix up linux-next leftovers] [akpm@linux-foundation.org: s/lockaphore/lock/, per Vlastimil] [akpm@linux-foundation.org: more linux-next fixups, per Michel] Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Laurent Dufour <ldufour@linux.ibm.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-13-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mmap locking API: use coccinelle to convert mmap_sem rwsem call sitesMichel Lespinasse3-6/+6
This change converts the existing mmap_sem rwsem calls to use the new mmap locking API instead. The change is generated using coccinelle with the following rule: // spatch --sp-file mmap_lock_api.cocci --in-place --include-headers --dir . @@ expression mm; @@ ( -init_rwsem +mmap_init_lock | -down_write +mmap_write_lock | -down_write_killable +mmap_write_lock_killable | -down_write_trylock +mmap_write_trylock | -up_write +mmap_write_unlock | -downgrade_write +mmap_write_downgrade | -down_read +mmap_read_lock | -down_read_killable +mmap_read_lock_killable | -down_read_trylock +mmap_read_trylock | -up_read +mmap_read_unlock ) -(&mm->mmap_sem) +(mm) Signed-off-by: Michel Lespinasse <walken@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Daniel Jordan <daniel.m.jordan@oracle.com> Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Davidlohr Bueso <dbueso@suse.de> Cc: David Rientjes <rientjes@google.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Jerome Glisse <jglisse@redhat.com> Cc: John Hubbard <jhubbard@nvidia.com> Cc: Liam Howlett <Liam.Howlett@oracle.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Ying Han <yinghan@google.com> Link: http://lkml.kernel.org/r/20200520052908.204642-5-walken@google.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: reorder includes after introduction of linux/pgtable.hMike Rapoport2-2/+2
The replacement of <asm/pgrable.h> with <linux/pgtable.h> made the include of the latter in the middle of asm includes. Fix this up with the aid of the below script and manual adjustments here and there. import sys import re if len(sys.argv) is not 3: print "USAGE: %s <file> <header>" % (sys.argv[0]) sys.exit(1) hdr_to_move="#include <linux/%s>" % sys.argv[2] moved = False in_hdrs = False with open(sys.argv[1], "r") as f: lines = f.readlines() for _line in lines: line = _line.rstrip(' ') if line == hdr_to_move: continue if line.startswith("#include <linux/"): in_hdrs = True elif not moved and in_hdrs: moved = True print hdr_to_move print line Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-4-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: introduce include/linux/pgtable.hMike Rapoport2-2/+2
The include/linux/pgtable.h is going to be the home of generic page table manipulation functions. Start with moving asm-generic/pgtable.h to include/linux/pgtable.h and make the latter include asm/pgtable.h. Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-3-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-09mm: don't include asm/pgtable.h if linux/mm.h is already includedMike Rapoport1-1/+0
Patch series "mm: consolidate definitions of page table accessors", v2. The low level page table accessors (pXY_index(), pXY_offset()) are duplicated across all architectures and sometimes more than once. For instance, we have 31 definition of pgd_offset() for 25 supported architectures. Most of these definitions are actually identical and typically it boils down to, e.g. static inline unsigned long pmd_index(unsigned long address) { return (address >> PMD_SHIFT) & (PTRS_PER_PMD - 1); } static inline pmd_t *pmd_offset(pud_t *pud, unsigned long address) { return (pmd_t *)pud_page_vaddr(*pud) + pmd_index(address); } These definitions can be shared among 90% of the arches provided XYZ_SHIFT, PTRS_PER_XYZ and xyz_page_vaddr() are defined. For architectures that really need a custom version there is always possibility to override the generic version with the usual ifdefs magic. These patches introduce include/linux/pgtable.h that replaces include/asm-generic/pgtable.h and add the definitions of the page table accessors to the new header. This patch (of 12): The linux/mm.h header includes <asm/pgtable.h> to allow inlining of the functions involving page table manipulations, e.g. pte_alloc() and pmd_alloc(). So, there is no point to explicitly include <asm/pgtable.h> in the files that include <linux/mm.h>. The include statements in such cases are remove with a simple loop: for f in $(git grep -l "include <linux/mm.h>") ; do sed -i -e '/include <asm\/pgtable.h>/ d' $f done Signed-off-by: Mike Rapoport <rppt@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Cain <bcain@codeaurora.org> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: "David S. Miller" <davem@davemloft.net> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Greentime Hu <green.hu@gmail.com> Cc: Greg Ungerer <gerg@linux-m68k.org> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Guo Ren <guoren@kernel.org> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Helge Deller <deller@gmx.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Mark Salter <msalter@redhat.com> Cc: Matthew Wilcox <willy@infradead.org> Cc: Matt Turner <mattst88@gmail.com> Cc: Max Filippov <jcmvbkbc@gmail.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Simek <monstr@monstr.eu> Cc: Mike Rapoport <rppt@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Richard Weinberger <richard@nod.at> Cc: Rich Felker <dalias@libc.org> Cc: Russell King <linux@armlinux.org.uk> Cc: Stafford Horne <shorne@gmail.com> Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Tony Luck <tony.luck@intel.com> Cc: Vincent Chen <deanbo422@gmail.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Will Deacon <will@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Link: http://lkml.kernel.org/r/20200514170327.31389-1-rppt@kernel.org Link: http://lkml.kernel.org/r/20200514170327.31389-2-rppt@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-04Merge tag 'media/v5.8-1' of ↵Linus Torvalds13-112/+1320
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media Pull media updates from Mauro Carvalho Chehab: - Media documentation is now split into admin-guide, driver-api and userspace-api books (a longstanding request from Jon); - The media Kconfig was reorganized, in order to make easier to select drivers and their dependencies; - The testing drivers now has a separate directory; - added a new driver for Rockchip Video Decoder IP; - The atomisp staging driver was resurrected. It is meant to work with 4 generations of cameras on Atom-based laptops, tablets and cell phones. So, it seems worth investing time to cleanup this driver and making it in good shape. - Added some V4L2 core ancillary routines to help with h264 codecs; - Added an ov2740 image sensor driver; - The si2157 gained support for Analog TV, which, in turn, added support for some cx231xx and cx23885 boards to also support analog standards; - Added some V4L2 controls (V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION) to help identifying where the camera is located at the device; - VIDIOC_ENUM_FMT was extended to support MC-centric devices; - Lots of drivers improvements and cleanups. * tag 'media/v5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (503 commits) media: Documentation: media: Refer to mbus format documentation from CSI-2 docs media: s5k5baf: Replace zero-length array with flexible-array media: i2c: imx219: Drop <linux/clk-provider.h> and <linux/clkdev.h> media: i2c: Add ov2740 image sensor driver media: ov8856: Implement sensor module revision identification media: ov8856: Add devicetree support media: dt-bindings: ov8856: Document YAML bindings media: dvb-usb: Add Cinergy S2 PCIe Dual Port support media: dvbdev: Fix tuner->demod media controller link media: dt-bindings: phy: phy-rockchip-dphy-rx0: move rockchip dphy rx0 bindings out of staging media: staging: dt-bindings: phy-rockchip-dphy-rx0: remove non-used reg property media: atomisp: unify the version for isp2401 a0 and b0 versions media: atomisp: update TODO with the current data media: atomisp: adjust some code at sh_css that could be broken media: atomisp: don't produce errs for ignored IRQs media: atomisp: print IRQ when debugging media: atomisp: isp_mmu: don't use kmem_cache media: atomisp: add a notice about possible leak resources media: atomisp: disable the dynamic and reserved pools media: atomisp: turn on camera before setting it ...
2020-05-18media: v4l2-ctrls: Add helper to register propertiesJacopo Mondi1-0/+40
Add an helper function to v4l2-ctrls to register controls associated with a device property. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-18media: v4l2-ctrls: Sort includes alphabeticallyJacopo Mondi1-4/+4
Before adding a new include directive, sort the existing ones in alphabetical order. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-18media: v4l2-fwnode: Add helper to parse device propertiesJacopo Mondi1-0/+42
Add an helper function to parse common device properties in the same way as v4l2_fwnode_endpoint_parse() parses common endpoint properties. Parse the 'rotation' and 'orientation' properties from the firmware interface. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-18media: v4l2-ctrls: Add camera orientation and rotationJacopo Mondi1-0/+13
Add support for the newly defined V4L2_CID_CAMERA_ORIENTATION and V4L2_CID_CAMERA_SENSOR_ROTATION read-only controls used to report the camera device mounting position and orientation respectively. Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-18media: Revert "media: v4l2-fwnode: Add a convenience function for ↵Steve Longerbeam1-62/+0
registering subdevs with notifiers" The users of v4l2_async_register_fwnode_subdev() have switched to parsing their endpoints and setting up async sub-device lists in their notifiers locally, without using the endpoint parsing callbacks. There are no more users of v4l2_async_register_fwnode_subdev() so this convenience function can be removed. This reverts commit 1634f0eded87d1f150e823fa56cd782ea0775eb2. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-18media: v4l2-mc: add v4l2_create_fwnode_links helpersSteve Longerbeam1-0/+95
Add functions to create media links between source and sink subdevices, based on the fwnode endpoint connections between them: v4l2_create_fwnode_links_to_pad() - create links from a source subdev to a single sink pad based on fwnode endpoint connections. v4l2_create_fwnode_links() - create all links from a source to sink subdev based on fwnode endpoint connections. These functions can be used in a sink's v4l2-async notifier subdev bound callback to make the links from the bound subdev. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-18media: v4l2-subdev: add v4l2_subdev_get_fwnode_pad_1_to_1Steve Longerbeam1-0/+22
Add a convenience function that can be used as the .get_fwnode_pad operation for subdevices that map port numbers and pad indexes 1:1. The function verifies the endpoint is owned by the subdevice, and if so returns the endpoint port number. Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-12media: v4l2-subdev: add VIDIOC_SUBDEV_QUERYCAP ioctlHans Verkuil1-0/+11
While normal video/radio/vbi/swradio nodes have a proper QUERYCAP ioctl that apps can call to determine that it is indeed a V4L2 device, there is currently no equivalent for v4l-subdev nodes. Adding this ioctl will solve that, and it will allow utilities like v4l2-compliance to be used with these devices as well. SUBDEV_QUERYCAP currently returns the version and capabilities of the subdevice. Define a capability flag to report if the subdevice is registered in read-only mode. Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-12media: v4l2-subdev: Guard whole fops and ioctl hdlrJacopo Mondi1-8/+31
A sub-device device node can be registered in user space only if the CONFIG_VIDEO_V4L2_SUBDEV_API Kconfig option is selected. Currently the open/close file operations and the ioctl handler have some parts of their implementations guarded by #if defined(CONFIG_VIDEO_V4L2_SUBDEV_API), while they are actually not accessible without a video device node registered to user space. Guard the whole open, close and ioctl handler and provide stubs if the VIDEO_V4L2_SUBDEV_API Kconfig option is not selected. This slightly reduces the kernel size when the option is not selected and simplifies the file ops and ioctl implementations. Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-12media: v4l2-dev: Add v4l2_device_register_ro_subdev_node()Jacopo Mondi2-2/+24
Add to the V4L2 core a function to register device nodes for video subdevices in read-only mode. Registering a device node in read-only mode is useful to expose to userspace the current sub-device configuration, without allowing application to change it by using the V4L2 subdevice ioctls. Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Jacopo Mondi <jacopo@jmondi.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-06media: v4l2: Extend VIDIOC_ENUM_FMT to support MC-centric devicesLaurent Pinchart1-2/+11
The VIDIOC_ENUM_FMT ioctl enumerates all formats supported by a video node. For MC-centric devices, its behaviour has always been ill-defined, with drivers implementing one of the following behaviours: - No support for VIDIOC_ENUM_FMT at all - Enumerating all formats supported by the video node, regardless of the configuration of the pipeline - Enumerating formats supported by the video node for the active configuration of the connected subdevice The first behaviour is obviously useless for applications. The second behaviour provides the most information, but doesn't offer a way to find what formats are compatible with a given pipeline configuration. The third behaviour fixes that, but with the drawback that applications can't enumerate all supported formats anymore, and have to modify the active configuration of the pipeline to enumerate formats. The situation is messy as none of the implemented behaviours are ideal, and userspace can't predict what will happen as the behaviour is driver-specific. To fix this, let's extend the VIDIOC_ENUM_FMT with a missing capability: enumerating pixel formats for a given media bus code. The media bus code is passed through the v4l2_fmtdesc structure in a new mbus_code field (repurposed from the reserved fields). With this capability in place, applications can enumerate pixel formats for a given media bus code without modifying the active configuration of the device. The current behaviour of the ioctl is preserved when the new mbus_code field is set to 0, ensuring compatibility with existing userspace. The API extension is documented as mandatory for MC-centric devices (as advertised through the V4L2_CAP_IO_MC capability), allowing applications and compliance tools to easily determine the availability of the VIDIOC_ENUM_FMT extension. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-05-06media: v4l2-dev/ioctl: Add V4L2_CAP_IO_MCNiklas Söderlund2-10/+72
Add a video device capability flag to indicate that its inputs and/or outputs are controlled by the Media Controller instead of the V4L2 API. When this flag is set, ioctl for enum inputs and outputs are automatically enabled and programmed to call a helper function. Suggested-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Helen Koike <helen.koike@collabora.com> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-21media: v4l2-ctrls: add __v4l2_ctrl_s_ctrl_compound()Hans Verkuil1-5/+5
Rather than creating new compound control helpers for each new type, create one generic function and just create defines on top. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Tested-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-21media: v4l2-ctrls: v4l2_ctrl_g/s_ctrl*(): don't continue when WARN_ONHans Verkuil1-6/+12
If the v4l2_ctrl_g_ctrl*() or __v4l2_ctrl_s_ctrl*() functions are called for the wrong control type then they call WARN_ON since that is a driver error. But they still continue, potentially overwriting data. Change this to return an error (s_ctrl) or 0 (g_ctrl), just to be safe. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-21media: v4l2-core: Add helpers to build the H264 P/B0/B1 reflistsBoris Brezillon3-0/+275
Building those list is a standard procedure described in section '8.2.4 Decoding process for reference picture lists construction' of the H264 specification. We already have 2 drivers needing the same logic (hantro and rkvdec) and I suspect we will soon have more. Let's provide generic helpers to create those lists. Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-21media: v4l2-fh: define v4l2_fh struct regardless of conditionSeungchul Kim1-2/+0
v4l2_fh struct define differently by CONFIG_V4L2_MEM2MEM_DEV. If some vendors use CONFIG_V4L2_MEM2MEM_DEV by module, it can make the mismatch of v4l2_fh sturct. By the mismatch, the following error occurs. =============================== [ 7.533506] v4l2_mem2mem: disagrees about version of symbol video_devdata [ 7.533594] v4l2_mem2mem: Unknown symbol video_devdata (err -22) [ 7.535319] v4l2_mem2mem: disagrees about version of symbol v4l2_event_pending [ 7.542532] v4l2_mem2mem: Unknown symbol v4l2_event_pending (err -22) =============================== So v4l2_fh struct is modified to does not have dependency for CONFIG_V4L2_MEM2MEM_DEV. Signed-off-by: Seungchul Kim <sc377.kim@samsung.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-21media: v4l2-ctrl: Add H264 profile and levelsMaheshwar Ajja1-0/+5
Add H264 profile "Contrained High" and H264 levels "5.2", "6.0", "6.1" and "6.2". Signed-off-by: Maheshwar Ajja <majja@codeaurora.org> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-21docs: fix broken references for ReST files that moved aroundMauro Carvalho Chehab1-1/+1
Some broken references happened due to shifting files around and ReST renames. Those can't be auto-fixed by the script, so let's fix them manually. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org> Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com> Link: https://lore.kernel.org/r/64773a12b4410aaf3e3be89e3ec7e34de2484eea.1586881715.git.mchehab+huawei@kernel.org Signed-off-by: Jonathan Corbet <corbet@lwn.net>
2020-04-14media: add v4l2 JPEG helpersPhilipp Zabel3-0/+638
Add helpers for JPEG header parsing. They allow both scanning for marker segment positions and later parsing the segments individually, as required by s5p-jpeg, as well as parsing all headers in one go, as required by coda-vpu. The frame header is always parsed, as basically all decoders are interested in width, height, and number of components. For convenience, the JPEG chroma subsampling factors are decoded into a v4l2_jpeg_chroma_subsampling enum. Only baseline and extended sequential DCT encoded JPEGs with 8-bit or 12-bit precision with up to four components are supported. Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-14media: v4l2-common: Add BGR666 to v4l2_format_infoDafna Hirschfeld1-0/+1
Add V4L2_PIX_FMT_BGR666 to the format table. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-14media: v4l2-common: change the pixel_enc of V4L2_PIX_FMT_GREY to YUVDafna Hirschfeld1-1/+1
V4L2_PIX_FMT_GREY format is Ycbcr format without the color data, therefore its pixel_enc should set to V4L2_PIXEL_ENC_YUV. Signed-off-by: Dafna Hirschfeld <dafna.hirschfeld@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-14media: v4l2-mem2mem: return CAPTURE buffer firstEzequiel Garcia1-1/+10
When the request API is used, typically an OUTPUT (src) buffer will be part of a request. A userspace process will be typically blocked, waiting on the request file descriptor. Returning the OUTPUT (src) buffer will wake-up such processes, who will immediately attempt to dequeue the CAPTURE buffer, only to find it's still unavailable. Therefore, change v4l2_m2m_buf_done_and_job_finish returning the CAPTURE (dst) buffer first, to avoid signalling the request file descriptor prematurely, i.e. before the CAPTURE buffer is done. When the request API is not used, this change should have no impact. Tested-by: Nicolas Dufresne <nicolas.dufresne@collabora.com> Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-14media: Kconfig: move V4L2 subdev API to v4l2-core/KconfigMauro Carvalho Chehab1-0/+9
This option is part of V4L2 API extra functionality set. Move it to be at the v4l2-core/Kconfig, where it belongs, cleaning the main Kconfig file. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-04-14media: pci: move VIDEO_PCI_SKELETON to a different KconfigMauro Carvalho Chehab1-10/+0
The V4L2 PCI skeleton is not part of the V4L2 core. Move it to appear together with the other PCI drivers, at the end, as this is something that normal users don't even need to bother. Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-20media: v4l: Add 14-bit raw greyscale pixel formatDaniel Glöckner1-0/+1
The new format is called V4L2_PIX_FMT_Y14. Like V4L2_PIX_FMT_Y10 and V4L2_PIX_FMT_Y12 it is stored in two bytes per pixel but has only two unused bits at the top. Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-20media: v4l: Add 14-bit raw bayer pixel formatsSakari Ailus1-0/+4
The formats added by this patch are: V4L2_PIX_FMT_SBGGR14 V4L2_PIX_FMT_SGBRG14 V4L2_PIX_FMT_SGRBG14 V4L2_PIX_FMT_SRGGB14 Signed-off-by: Jouni Ukkonen <jouni.ukkonen@intel.com> Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> [dg@emlix.com: rebased onto current media_tree] Signed-off-by: Daniel Glöckner <dg@emlix.com> Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: v4l2-fwnode: add initial connector parsing supportMarco Felsch1-0/+165
The patch adds the initial connector parsing code, so we can move from a driver specific parsing code to a generic one. Currently only the generic fields and the analog-connector specific fields are parsed. Parsing the other connector specific fields can be added by a simple callbacks. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> [hverkuil-cisco@xs4all.nl: replace ; with break; in a empty case] Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: v4l2-fwnode: add endpoint id field to v4l2_fwnode_linkMarco Felsch1-0/+2
A link is between two endpoints not between two ports to be more precise. Add the local_id/remote_id field which stores the endpoint reg/port property to the link. Now the link holds all necessary information about a link. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: v4l2-fwnode: simplify v4l2_fwnode_parse_linkMarco Felsch1-16/+9
This helper was introduced before those helpers where awailable. Convert it to cleanup the code and improbe readability. Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-12media: v4l2-fwnode: fix v4l2_fwnode_parse_link handlingMarco Felsch1-1/+1
Currently the driver differentiate the port number property handling for ACPI and DT. This is wrong as because ACPI should use the "reg" val too [1]. [1] https://patchwork.kernel.org/patch/11421985/ Fixes: ca50c197bd96 ("[media] v4l: fwnode: Support generic fwnode for parsing standardised properties") Signed-off-by: Marco Felsch <m.felsch@pengutronix.de> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-06media: v4l2-mem2mem: handle draining, stopped and next-buf-is-last statesNeil Armstrong1-2/+219
Since the draining and stop phase of the HW decoder mem2mem bahaviour is now clearly defined, we can move handling of the following states to the common v4l2-mem2mem core code: - draining - stopped - next-buf-is-last By introducing the following v4l2-mem2mem APIs: - v4l2_m2m_encoder_cmd/v4l2_m2m_ioctl_encoder_cmd to handle start/stop command - v4l2_m2m_decoder_cmd/v4l2_m2m_ioctl_decoder_cmd to handle start/stop command - v4l2_m2m_update_start_streaming_state to update state on start of streaming of the de/encoder queue - v4l2_m2m_update_stop_streaming_state to update state on stop of streaming of the de/encoder queue - v4l2_m2m_last_buffer_done to make the current dest buffer as the last one And inline helpers: - v4l2_m2m_mark_stopped to mark the de/encoding process as stopped - v4l2_m2m_clear_state to clear the de/encoding state - v4l2_m2m_dst_buf_is_last to detect the current dequeued dst_buf is the last - v4l2_m2m_has_stopped to detect the de/encoding stopped state - v4l2_m2m_is_last_draining_src_buf to detect the current source buffer should be the last processing before stopping the de/encoding process The special next-buf-is-last when min_buffers != 1 case is also handled in v4l2_m2m_qbuf() by reusing the other introduced APIs. This state management has been stolen from the vicodec implementation, and is no-op for drivers not calling the v4l2_m2m_encoder_cmd or v4l2_m2m_decoder_cmd and v4l2_m2m_update_start/stop_streaming_state. The vicodec will be the first one to be converted as an example. Signed-off-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-06media: v4l2-ctrls: v4l2_ctrl_request_complete() should always set ref->reqHans Verkuil1-2/+9
When the request is completed, all controls are copied to the request object. However, when VIDIOC_G_EXT_CTRLS attempts to read control values from the request it will read the current value instead for any control reference that has a NULL ref->req pointer. But that's wrong: after completing the request *all* controls should have a non-NULL ref->req pointer since they are after all copied to the request. So set ref->req if it wasn't set already. Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Reported-by: Paul Kocialkowski <paul.kocialkowski@bootlin.com> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
2020-03-06media: v4l2-core: fix entity initialization in device_register_subdevEugen Hristev1-5/+2
The entity variable was being initialized in the wrong place, before the parameters have been checked. To solve this, completely removed the entity variable and replaced it with the initialization value : &sd->entity. This will avoid dereferencing 'sd' pointer before it's being checked if it's NULL. Fixes: 61f5db549dde ("[media] v4l: Make v4l2_subdev inherit from media_entity") Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Acked-by: Sakari Ailus <sakari.ailus@linux.intel.com> Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 07:27:31 +0300