summaryrefslogtreecommitdiff
path: root/drivers/media/rc/keymaps
AgeCommit message (Collapse)AuthorFilesLines
2012-01-11[media] rc-videomate-m1f.c Rename to match remote controler nameSamuel Rakitnican1-12/+12
This remote was added with support for card Compro VideoMate M1F. This remote is shipped with various Compro cards, not this one only. Furthermore this remote can be bought separately under name Compro VideoMate K100. http://compro.com.tw/en/product/k100/k100.html So give it a proper name. [mchehab@redhat.com: Fix the Makefile] Signed-off-by: Samuel Rakitničan <samuel.rakitnican@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-12-30Merge tag 'v3.2-rc7' into staging/for_v3.3Mauro Carvalho Chehab3-169/+169
Linux 3.2-rc7 * tag 'v3.2-rc7': (1304 commits) Linux 3.2-rc7 netfilter: xt_connbytes: handle negation correctly Btrfs: call d_instantiate after all ops are setup Btrfs: fix worker lock misuse in find_worker net: relax rcvbuf limits rps: fix insufficient bounds checking in store_rps_dev_flow_table_cnt() net: introduce DST_NOPEER dst flag mqprio: Avoid panic if no options are provided bridge: provide a mtu() method for fake_dst_ops md/bitmap: It is OK to clear bits during recovery. md: don't give up looking for spares on first failure-to-add md/raid5: ensure correct assessment of drives during degraded reshape. md/linear: fix hot-add of devices to linear arrays. sparc64: Fix MSIQ HV call ordering in pci_sun4v_msiq_build_irq(). pata_of_platform: Add missing CONFIG_OF_IRQ dependency. ipv4: using prefetch requires including prefetch.h VFS: Fix race between CPU hotplug and lglocks vfs: __read_cache_page should use gfp argument rather than GFP_KERNEL USB: Fix usb/isp1760 build on sparc net: Add a flow_cache_flush_deferred function ... Conflicts: drivers/media/common/tuners/tda18218.c drivers/media/video/omap3isp/ispccdc.c drivers/staging/media/as102/as102_drv.h
2011-12-20Merge branch 'v4l_for_linus' of ↵Linus Torvalds3-169/+169
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media * 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (31 commits) Revert "[media] af9015: limit I2C access to keep FW happy" [media] s5p-fimc: Fix camera input configuration in subdev operations [media] m5mols: Fix logic in sanity check [media] ati_remote: switch to single-byte scancodes [media] V4L: mt9m111: fix uninitialised mutex [media] V4L: omap1_camera: fix missing <linux/module.h> include [media] V4L: mt9t112: use after free in mt9t112_probe() [media] V4L: soc-camera: fix compiler warnings on 64-bit platforms [media] s5p_mfc_enc: fix s/H264/H263/ typo [media] omap_vout: Fix compile error in 3.1 [media] au0828: add missing models 72101, 72201 & 72261 to the model matrix [media] au0828: add missing USB ID 2040:7213 [media] au0828: add missing USB ID 2040:7260 [media] [trivial] omap24xxcam-dma: Fix logical test [media] omap_vout: fix crash if no driver for a display [media] media: video: s5p-tv: fix build break [media] omap3isp: fix compilation of ispvideo.c [media] m5mols: Fix set_fmt to return proper pixel format code [media] s5p-fimc: Use correct fourcc for RGB565 colour format [media] s5p-fimc: Fail driver probing when sensor configuration is wrong ...
2011-12-11[media] ati_remote: switch to single-byte scancodesAnssi Hannula3-169/+169
The ati_remote driver currently uses 2-byte scancodes. However, one of those bytes is actually a checksum and therefore shouldn't be considered as part of the scancode. Fix the driver to only use the actual data byte as a scancode and to check the checksum itself. Update the bundled keymaps accordingly. Since ati_remote was only migrated to the rc subsystem for 3.2, the previous scancodes weren't emitted on any stable kernel. Reported-by: George Spelvin <linux@horizon.com> Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-24Merge tag 'v3.2-rc2' into staging/for_v3.3Mauro Carvalho Chehab89-0/+89
* tag 'v3.2-rc2': (3068 commits) Linux 3.2-rc2 hfs: add sanity check for file name length fsl-rio: fix compile error blackfin: Fixup export.h includes Blackfin: add serial TX IRQ in individual platform resource virtio-pci: fix use after free ACPI / cpuidle: Remove acpi_idle_suspend (to fix suspend regression) drm/radeon/kms/combios: fix dynamic allocation of PM clock modes [CPUFREQ] db8500: fix build error due to undeclared i variable bma023: Add SFI translation for this device vrtc: change its year offset from 1960 to 1972 ce4100: fix a build error arm/imx: fix imx6q mmc error when mounting rootfs arm/imx: fix AUTO_ZRELADDR selection arm/imx: fix the references to ARCH_MX3 ARM: mx51/53: set pwm clock parent to ipg_perclk btrfs: rename the option to nospace_cache drm/radeon/kms/pm: switch to dynamically allocating clock mode array drm/radeon/kms: optimize r600_pm_profile_init drm/radeon/kms/pm: add a proper pm profile init function for fusion ... Conflicts: drivers/media/radio/Kconfig
2011-11-20[media] em28xx: Add IR support for HVR-930CMauro Carvalho Chehab1-0/+51
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-11-07Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds89-0/+89
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-01drivers/media: Add module.h to all files using it implicitlyPaul Gortmaker89-0/+89
A pending cleanup will mean that module.h won't be implicitly everywhere anymore. Make sure the modular drivers in clocksource are actually calling out for <module.h> explicitly in advance. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-09-23[media] rc tables: include linux/module.hMauro Carvalho Chehab3-0/+3
Prevents errors when merging with -next: drivers/media/rc/keymaps/rc-snapstream-firefly.c:105:16: error: expected declaration specifiers or ‘...’ before string constant drivers/media/rc/keymaps/rc-snapstream-firefly.c:106:15: error: expected declaration specifiers or ‘...’ before string constant Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-22[media] ati_remote: add support for SnapStream Firefly remoteAnssi Hannula2-0/+107
The protocol differs by having two toggle bits in the scancode. Since one of the bits is otherwise unused, we can safely handle the bits unconditionally. [mchehab@redhat.com: Fix some bad whitespacing] Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-22[media] ati_remote: add keymap for Medion X10 RF remoteAnssi Hannula2-0/+117
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-22[media] ati_remote: migrate to the rc subsystemAnssi Hannula2-0/+104
The keycode mangling algorithm is kept the same, so the new external keymap has the same values as the old static table. [mchehab@redhat.com: Fix some bad whitespacing] Signed-off-by: Anssi Hannula <anssi.hannula@iki.fi> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-09-04[media] Add missing OK key to PCTV IR keymapChris Rankin1-0/+1
Hi, The following patch adds the IR code for the missing "OK" key to the Pinnacle PCTV HD map. This map is now used by the PCTV 290e DVB-T2 device, whose remote control has 26 buttons. Signed-off-by: Chris Rankin <rankincj@yahoo.com> Reviewed-by: Devin Heitmueller <dheitmueller@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-28[media] rc-rc6-mce: minor keymap updatesJarod Wilson1-2/+1
Microsoft's Windows Media Center specification and requirements doc from 2011.03.18 now refers to the former Power Toggle button as the Sleep Toggle, and recommends using a new moon sleep icon for it. Its the same key, but its apparently always been meant to put the system to sleep, not power it off. Adjust accordingly. While we're here, lets also remove the duplicate KEY_PLAYPAUSE entry. Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-07-01[media] keymaps: fix table for pinnacle pctv hd devicesJarod Wilson1-31/+27
Both consumers of RC_MAP_PINNACLE_PCTV_HD send along full RC-5 scancodes, so this update makes this keymap actually *have* full scancodes, heisted from rc-dib0700-rc5.c. This should fix out of the box remote functionality for the Pinnacle PCTV HD 800i (cx88 pci card) and PCTV HD Pro 801e (em28xx usb stick). CC: stable@kernel.org Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-26[media] v1.88 DM04/QQBOX Move remote to use rc_core dvb-usb-remoteMalcolm Priestley1-67/+67
driver to use dvb-usb-remote. The remote(s) generates 24 bit NEC codes, lme2510 keymaps redefined. Other minor fixes fix le warning. make sure frontend is detached on firmware change. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] rc-winfast: fix inverted left/right key mappingsJarod Wilson1-2/+2
Reported-by: Douglas Clowes <dclowes1@optusnet.com.au> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] rc: further key name standardizationJarod Wilson5-8/+8
Use the newly introduced KEY_IMAGES where appropriate, and standardize on KEY_MEDIA for media center/application launcher button (such as the Windows logo key on the Windows Media Center Ed. remotes). Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-05-20[media] rc: add tivo/nero liquidtv keymapJarod Wilson2-0/+99
Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-31Fix common misspellingsLucas De Marchi3-4/+4
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-23[media] rc/keymaps: Remove the obsolete rc-rc5-tv keymapMauro Carvalho Chehab2-82/+0
This keymap were used for the Hauppauge Black remote controller only. It also contains some keycodes not found there. As the Hauppauge Black is now part of the hauppauge keymap, just remove it. Also, remove the modprobe hacks to select between the Gray and the Black versions of the remote controller as: - Both are supported by default by the keymap; - If the user just wants one keyboard supported, it is just a matter of changing the keymap via the userspace tool (ir-keytable), removing the keys that he doesn't desire. As ir-keytable auto-loads the keys via udev, this is better than obscure modprobe parameters. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-23[media] remove the old RC_MAP_HAUPPAUGE_NEW RC mapMauro Carvalho Chehab2-101/+0
The rc-hauppauge-new map is a messy thing, as it bundles 3 different remote controllers as if they were just one, discarding the address byte. Also, some key maps are wrong. With the conversion to the new rc-core, it is likely that most of the devices won't be working properly, as the i2c driver and the raw decoders are now providing 16 bits for the remote, instead of just 8. delete mode 100644 drivers/media/rc/keymaps/rc-hauppauge-new.c Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-23[media] rc/keymaps: Rename Hauppauge table as rc-hauppaugeMauro Carvalho Chehab2-4/+10
There are two "hauppauge-new" keymaps, one with protocol unknown, and the other with the protocol marked accordingly. However, both tables are miss-named. Also, the old rc-hauppauge-new is broken, as it mixes three different controllers as if they were just one. This patch solves half of the problem by renaming the correct keycode table as just rc-hauppauge. This table contains the codes for the four different types of remote controllers found on Hauppauge cards, properly mapped with their different addresses. create mode 100644 drivers/media/rc/keymaps/rc-hauppauge.c delete mode 100644 drivers/media/rc/keymaps/rc-rc5-hauppauge-new.c [Jarod: fix up RC_MAP_HAUPPAUGE defines] Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-23[media] rc-rc5-hauppauge-new: Fix Hauppauge Grey mappingMauro Carvalho Chehab1-41/+47
The keys for the old black were messed with the ones for the hauppauge grey. Fix it. Also, fixes some keycodes and order the keys according with the way they appear inside the remote controller. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-23[media] rc-rc5-hauppauge-new: Add support for the old Black RCMauro Carvalho Chehab1-1/+35
Hans borrowed me an old Black Hauppauge RC. Thanks to that, we can fix the RC5 table for Hauppauge. Thanks-to: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-23[media] rc-rc5-hauppauge-new: Add the old control to the tableMauro Carvalho Chehab1-1/+55
Adds the old grey remote controller to Hauppauge table. Hans borrowed me an old gray Hauppauge RC. Thanks to that, we can fix the RC5 table for Hauppauge. Thanks-to: Hans Verkuil <hverkuil@xs4all.nl> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-23[media] rc-winfast: Fix the keycode tablesMauro Carvalho Chehab1-11/+11
One of the remotes has a picture available at: http://lirc.sourceforge.net/remotes/leadtek/Y04G0004.jpg As there's one variant with a set direction keys plus vol/chann keys, and the same table is used for both models, change it to represent all keys, avoiding the usage of weird function keys. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-23[media] rc/keymaps: Use KEY_LEFTMETA were pertinentMauro Carvalho Chehab4-4/+4
Using xev and testing the "Windows" key on a normal keyboard, it is mapped as KEY_LEFTMETA. So, as this is the standard code for it, use it, instead of a generic, meaningless KEY_PROG1. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-23[media] rc/keymaps: Fix most KEY_PROG[n] keycodesMauro Carvalho Chehab4-6/+6
Those KEY_PROG[n] keys were used on places where the developer didn't know for sure what key should be used. On several cases, using KEY_RED, KEY_GREEN, KEY_YELLOW would be enough. On others, there are specific keys for that already. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-23[media] rc/keymaps: Use KEY_VIDEO for Video SourceMauro Carvalho Chehab17-22/+22
Each keyboard map were using a different definition for the Source/Video Source key. Behold Columbus were the only one using KEY_PROPS. As we want to standardize those keys at X11 and at userspace applications, we need to use just one code for it. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-23[media] rc/keymaps: use KEY_CAMERA for snapshotsMauro Carvalho Chehab7-7/+8
On a few places, KEY_MHP were used for snapshots. However, KEY_CAMERA is used for it on all the other keyboards that have a snapshot/Picture button. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com> Signed-off-by: Jarod Wilson <jarod@redhat.com>
2011-03-22[media] Change to 32 bit and add other remote controls for lme2510Malcolm Priestley1-27/+69
These bubble button remote controls appear to be generic from China. These are the three variants known to be supplied with DM04/QQBOX DVB-S They could well be supplied with other devices from the region. Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] add TerraTec remoteAntti Palosaari2-0/+73
Remote used for TerraTec Cinergy T Stick RC. Keytable from Martin Groszhauser <mgroszhauser@gmail.com> Signed-off-by: Antti Palosaari <crope@iki.fi> Cc: Martin Groszhauser <mgroszhauser@gmail.com> Cc: TerraTux <TerraTux@terratec.de> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-03-22[media] technisat-usb2: added driver for Technisat's USB2.0 DVB-S/S2 receiverPatrick Boettcher2-0/+94
This patch is adding support for Technisat's new USB2.0 DVB-S/S2 receiver device. The development was sponsored by Technisat. The Green led is toggle depending on the frontend-state. The Red LED is turned on all the time. The MAC address reading from the EEPROM along with the LRC-method to check whether its valid. Support for the IR-receiver of the Technisat USB2 box. The keys of small, black remote-control are built-in, repeated key behaviour are simulated. The i2c-mutex of the dvb-usb-structure is used as a general mutex for USB requests, as there are 3 threads racing for atomic requests consisting of multiple usb-requests. A module option is there which disables the toggling of LEDs by the driver on certain triggers. Useful when being used in a "dark" environment. [mchehab@redhat.com: Fix merge conflicts with RC renaming patches] Signed-off-by: Martin Wilks <m.wilks@technisat.com> Signed-off-by: Patrick Boettcher <pboettcher@kernellabs.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-31[media] rc/mce: add mappings for missing keysJarod Wilson1-0/+6
Per http://mediacenterguides.com/book/export/html/31 and investigation by Erin, we were missing these last three mappings to complete the mce key table. Lets remedy that. Reported-by: Erin Simonds <fisslefink@gmail.com> Signed-off-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2011-01-19[media] rc-dib0700-nec: Fix keytable for Pixelview SBTVDMauro Carvalho Chehab1-26/+26
dib0700 now outputs NEC extended keycodes. Fix the keytable to reflect that. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] saa7134: Add support for Compro VideoMate Vista M1FRamiro Morales2-0/+93
Signed-off-by: Pavel Osnova <pvosnova@gmail.com> Signed-off-by: Ramiro Morales <ramiro@rmorales.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] MEDIA: RC: Provide full scancodes for TT-1500 remote controlDavid Henningsson1-39/+39
Add 0x15 prefix to scancodes for TT-1500 remote control. Signed-off-by: David Henningsson <david.henningsson@canonical.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Add a keymap for Pixelview 002-T remoteMauro Carvalho Chehab2-0/+78
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] keycodes for DSR-0112 remote bundled with Haupauge MiniStickRichard Zidlicky1-0/+38
Add kycodes for DSR-0112 remote that comes together with Haupauge MiniStick http://lirc.sourceforge.net/remotes/hauppauge/DSR-0112.jpg [mchehab@redhat.com: Fix KEY_PREVIOUS to match the definition for the other model] Signed-off-by: Richard Zidlicky <rz@linux-m68k.org> Acked-by: Jarod Wilson <jarod@redhat.com> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] Fix rc-tbs-nec table after converting the cx88 driver to ir-coreMariusz Białończyk1-32/+34
The patch fixes the rc-tbs-nec table after converting drivers/media/video/cx88 to ir-core (commit ba7e90c9f878e0ac3c0614a5446fe5c62ccc33ec). It is also adds two missing buttons (10- and 10+) with its definition (KEY_10CHANNELSUP and KEY_10CHANNELSDOWN). [mchehab@redhat.com: move keycode numbers to 0x1b8/0x1b9 as requested by the input Maintainer] Signed-off-by: Mariusz Białończyk <manio@skyboo.net> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] saa7134: use full keycode for BeholdTVDavid Härdeman1-35/+35
Using the full keycode for BeholdTV hardware makes another module parameter unnecessary. Signed-off-by: David Härdeman <david@hardeman.nu> Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: use rc_map_ prefix for all rc map tablesMauro Carvalho Chehab86-258/+258
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Name RC keymap tables as rc_map_tableMauro Carvalho Chehab86-86/+86
Remote keytables had different names all over the place. Part of the fault is due to a bad naming when rc subsystem was created, but there were lots of old names that were still here. Use a common standard for everything. Patch generated by this script: for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_scancode,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_codes_,rc_map_,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_key_map,rc_map_table,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,rc_map_table_size,rc_map_size,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: Rename remote controller type to rc_type instead of ir_typeMauro Carvalho Chehab86-86/+86
for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,IR_TYPE,RC_TYPE,g <$i >a && mv a $i; done for i in `find drivers/staging -type f -name *.[ch]` `find include/media -type f -name *.[ch]` `find drivers/media -type f -name *.[ch]`; do sed s,ir_type,rc_type,g <$i >a && mv a $i; done Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rc: rename the remaining things to rc_coreMauro Carvalho Chehab2-2/+2
The Remote Controller subsystem is meant to be used not only by Infra Red but also for similar types of Remote Controllers. The core is not specific to Infra Red. As such, rename: - ir-core.h to rc-core.h - IR_CORE to RC_CORE - namespace inside rc-core.c/rc-core.h To be consistent with the other changes. No functional change on this patch. Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-12-29[media] rename drivers/media/IR to drives/media/rcMauro Carvalho Chehab88-0/+7905
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>