summaryrefslogtreecommitdiff
path: root/drivers/mailbox
AgeCommit message (Collapse)AuthorFilesLines
2018-12-22mailbox: tegra-hsp: Use device-managed registration APIThierry Reding1-24/+6
In order to get rid of a lot of cleanup boilerplate code, use the device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: tegra-hsp: use devm_kstrdup_const()Bartosz Golaszewski1-32/+4
Use devm_kstrdup_const() in the tegra-hsp driver. This mostly serves as an example of how to use this new routine to shrink driver code. Also use devm_kzalloc() instead of regular kzalloc() to shrink the driver even more. Doorbell objects are only removed in the driver's remove callback so it's safe to convert all memory allocations to devres. Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: tegra-hsp: Add suspend/resume supportThierry Reding1-0/+19
Upon resuming from a system sleep state, the interrupts for all active shared mailboxes need to be reenabled, otherwise they will not work. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: tegra-hsp: Add support for shared mailboxesThierry Reding1-61/+443
The Tegra HSP block supports 'shared mailboxes' that are simple 32-bit registers consisting of a FULL bit in MSB position and 31 bits of data. The hardware can be configured to trigger interrupts when a mailbox is empty or full. Add support for these shared mailboxes to the HSP driver. The initial use for the mailboxes is the Tegra Combined UART. For this purpose, we use interrupts to receive data, and spinning to wait for the transmit mailbox to be emptied to minimize unnecessary overhead. Based on work by Mikko Perttunen <mperttunen@nvidia.com>. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: Allow multiple controllers per deviceMikko Perttunen1-1/+2
Look through the whole controller list when mapping device tree phandles to controllers instead of stopping at the first one. Each controller is intended to only contain one kind of mailbox, but some devices (like Tegra HSP) implement multiple kinds and use the same device tree node for all of them. As such, we need to allow multiple mbox_controllers per device tree node. Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: Support blocking transfers in atomic contextThierry Reding1-0/+28
The mailbox framework supports blocking transfers via completions for clients that can sleep. In order to support blocking transfers in cases where the transmission is not permitted to sleep, add a new ->flush() callback that controller drivers can implement to busy loop until the transmission has been completed. A new mbox_flush() function can be called by mailbox consumers in atomic context to make sure a transfer has completed. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: ti-msgmgr: Use device-managed registration APIThierry Reding1-12/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: stm32-ipcc: Use device-managed registration APIThierry Reding1-3/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Ludovic Barre <ludovic.barre@st.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: rockchip: Use device-managed registration APIThierry Reding1-14/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: qcom-apcs: Use device-managed registration APIThierry Reding1-2/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: platform-mhu: Use device-managed registration APIThierry Reding1-11/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Acked-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: omap: Use device-managed registration APIThierry Reding1-3/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: mtk-cmdq: Remove needless devm_kfree() callsThierry Reding1-8/+0
Memory allocated through device-managed functions doesn't need to be explicitly freed, so these calls can be removed. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: mtk-cmdq: Use device-managed registration APIThierry Reding1-2/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: xgene-slimpro: Use device-managed registration APIThierry Reding1-10/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: sti: Use device-managed registration APIThierry Reding1-12/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: altera: Use device-managed registration APIThierry Reding1-14/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: imx: Use device-managed registration APIThierry Reding1-2/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: hi6220: Use device-managed registration APIThierry Reding1-10/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: hi3660: Use device-managed registration APIThierry Reding1-10/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Tested-by: Leo Yan <leo.yan@linaro.org> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: bcm-pdc: Use device-managed registration APIThierry Reding1-3/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: bcm-flexrm: Use device-managed registration APIThierry Reding1-3/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: bcm2835: Use device-managed registration APIThierry Reding1-9/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: arm-mhu: Use device-managed registration APIThierry Reding1-11/+1
Get rid of some boilerplate driver removal code by using the newly added device-managed registration API. Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-22mailbox: Add device-managed registration functionsThierry Reding1-0/+70
Add device-managed equivalents of the mbox_controller_register() and mbox_controller_unregister() functions that can be used to have the devres infrastructure automatically unregister mailbox controllers on driver probe failure or driver removal. This can help remove a lot of boiler plate code from drivers. Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: bcm2835: Switch to SPDX identifierStefan Wahren1-7/+1
Adopt the SPDX license identifier headers to ease license compliance management. Cc: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com> Reviewed-by: Eric Anholt <eric@anholt.net> Acked-by: Lubomir Rintel <lkundrak@v3.sk> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: ti-msgmgr: Off by one in ti_msgmgr_of_xlate()Dan Carpenter1-1/+1
The > comparison should be >= or we access one element beyond the end of the array. (The inst->qinsts[] array is allocated in the ti_msgmgr_probe() function and it has ->num_valid_queues elements.) Fixes: a2b79838b891 ("mailbox: ti-msgmgr: Add support for Secure Proxy") Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: Hi3660: Fixup mailbox state machine malfunction issueKevin Wangtao1-12/+10
Current mailbox driver of Hi3660 release the mailbox directly before sending a new message which may cause last message lost and next message sending doesn't take effect actually. This patch fixs this issue by following the right progress below, each time before sending a message, mailbox driver will check whether the mailbox is in ready state, if last message has been acknowledged, the mailbox driver will clear the ack state to turn the mailbox to ready state again. Signed-off-by: Kevin Wangtao <kevin.wangtao@hisilicon.com> Reviewed-and-tested-by: Leo Yan <leo.yan@linaro.org> Tested-by: Valentin Schneider <valentin.schneider@arm.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-12-12mailbox: hi3660: constify mbox_chan_ops structureJulia Lawall1-1/+1
The mbox_chan_ops structure can be const as it is only stored in the ops field of an mbox_controller structure and this field is const. Done with the help of Coccinelle. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-10-29Merge tag 'mailbox-v4.20' of ↵Linus Torvalds5-9/+13
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - convert print users to use the %pOFn format specifier - enable ti-msgmr driver for the K3 platform as well - add QCS404 to compatible list of QCOM's APCS IPC driver - minor spelling fixes toogle -> toggle - kzalloc failure catch in Mediatek driver * tag 'mailbox-v4.20' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox: mediatek: Add check for possible failure of kzalloc mailbox: bcm-flexrm-mailbox: fix spelling mistake "toogle" -> "toggle" mailbox: qcom: Add QCS404 APPS Global compatible drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3 mailbox: Convert to using %pOFn instead of device_node.name
2018-09-29mailbox: mediatek: Add check for possible failure of kzallocHoulong Wei1-0/+3
The patch 623a6143a845("mailbox: mediatek: Add Mediatek CMDQ driver") introduce the following static checker warning: drivers/mailbox/mtk-cmdq-mailbox.c:366 cmdq_mbox_send_data() error: potential null dereference 'task'. (kzalloc returns null) Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver") Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Houlong Wei <houlong.wei@mediatek.com> Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29mailbox: bcm-flexrm-mailbox: fix spelling mistake "toogle" -> "toggle"Colin Ian King1-3/+3
Trivial fix to spelling mistake in function name flexrm_flip_header_toogle, rename it to flexrm_flip_header_toggle. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29mailbox: qcom: Add QCS404 APPS Global compatibleBjorn Andersson1-0/+1
Add support for the QCS404 APPS Global block with IPC register at offset 8. Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Reviewed-by: Vinod Koul <vkoul@kernel.org> Reviewed-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29drivers: mailbox: Make ti-msgmr driver depend on ARCH_K3Nishanth Menon1-4/+4
ti-msgmr driver can support K3 platforms as well. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-29mailbox: Convert to using %pOFn instead of device_node.nameRob Herring1-2/+2
In preparation to remove the node name pointer from struct device_node, convert printf users to use the %pOFn format specifier. Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-09-10mailbox: PCC: handle parse errorDavid Arcari1-2/+5
acpi_pcc_probe() calls acpi_table_parse_entries_array() but fails to check for an error return. This in turn can result in calling kcalloc() with a negative count as well as emitting the following misleading erorr message: [ 2.642015] Could not allocate space for PCC mbox channels Fixes: 8f8027c5f935 (mailbox: PCC: erroneous error message when parsing ACPI PCCT) Signed-off-by: David Arcari <darcari@redhat.com> Reviewed-by: Al Stone <ahs3@redhat.com> Cc: 4.18+ <stable@vger.kernel.org> # 4.18+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2018-08-15mailbox: Add support for i.MX messaging unitOleksij Rempel3-0/+366
The i.MX Messaging Unit is a two side block which allows applications implement communication over this sides. The MU includes the following features: - Messaging control by interrupts or by polling - Four general-purpose interrupt requests reflected to the other side - Three general-purpose flags reflected to the other side - Four receive registers with maskable interrupt - Four transmit registers with maskable interrupt Reviewed-by: Vladimir Zapolskiy <vz@mleia.com> Reviewed-by: Dong Aisheng <aisheng.dong@nxp.com> Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-15mailbox: add MODULE_LICENSE() for mtk-cmdq-mailbox.cRandy Dunlap1-0/+2
Fix missing MODULE_LICENSE() in mtk-cmdq-mailbox.c: WARNING: modpost: missing MODULE_LICENSE() in drivers/mailbox/mtk-cmdq-mailbox.o Fixes: 623a6143a845 ("mailbox: mediatek: Add Mediatek CMDQ driver") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: <linux-mediatek@lists.infradead.org> Cc: CK Hu <ck.hu@mediatek.com> Cc: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: mediatek: Add Mediatek CMDQ driverHoulong Wei3-0/+581
This patch is first version of Mediatek Command Queue(CMDQ) driver. The CMDQ is used to help write registers with critical time limitation, such as updating display configuration during the vblank. It controls Global Command Engine (GCE) hardware to achieve this requirement. Currently, CMDQ only supports display related hardwares, but we expect it can be extended to other hardwares for future requirements. Signed-off-by: Houlong Wei <houlong.wei@mediatek.com> Signed-off-by: HS Liao <hs.liao@mediatek.com> Signed-off-by: CK Hu <ck.hu@mediatek.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Add support for Secure ProxyNishanth Menon1-28/+205
Secure Proxy is another communication scheme in Texas Instrument's devices intended to provide an unique communication path from various processors in the System on Chip(SoC) to a central System Controller. Secure proxy is, in effect, an evolution of current generation Message Manager hardware block found in K2G devices. However the following changes have taken place: Secure Proxy instance exposes "threads" or "proxies" which is primary representation of "a" communication channel. Each thread is preconfigured by System controller configuration based on SoC usage requirements. Secure proxy by itself represents a single "queue" of communication but allows the proxies to be independently operated. Each Secure proxy thread can uniquely have their own error and threshold interrupts allowing for more fine control of IRQ handling. Provide the driver support for Secure Proxy and thread instances. NOTE: Secure proxy configuration is only done by System Controller, hence these are assumed to be pre-configured instances. See AM65x Technical Reference Manual (SPRUID7, April 2018) for further details: http://www.ti.com/lit/pdf/spruid7 Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Move the memory region name to descriptorNishanth Menon1-2/+8
For newer generation of the hardware, the naming of the region is decided at integration level and there could be additional regions as well. Hence move the region naming to be described from compatible descriptor. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Change message count mask to be descriptor basedNishanth Menon1-7/+18
Change mask used to extract the message count to be descriptor based. This is to support changes for count location for various SoC solutions. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Allocate Rx channel resources only on requestNishanth Menon1-30/+61
In a much bigger system SoCs, the number of Rx channels can be many and mostly unused based on the system of choice, and not all Rx channels need IRQs and allocating all memory at probe will be inefficient. Some SoCs could have total threads in the 100s and usage would be just 1 Rx thread. Thus, request and map the IRQs and allocate memory only when needed. Since these channels are requested by client drivers on need, our utilization will be optimal. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: ti-msgmgr: Get rid of unused structure membersNishanth Menon1-6/+0
Though q_proxies and q_slices do describe the hardware configuration, they are not necessary for operation given that the values are always default. Hence drop the same. Signed-off-by: Nishanth Menon <nm@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox/omap: use of_device_get_match_data() to get match dataSuman Anna1-7/+14
The OMAP Mailbox driver is directly using an integer value as match data for distinguishing the interrupt register layout between OMAP2 and OMAP4+ SoCs. Introduce a dedicated structure for storing this match data, and simplify the probe function by using the of_device_get_match_data() function. This allows the driver to scale for 64-bit platforms by eliminating the unnecessary type-casting between a u32 and a void pointer types. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox/omap: switch to SPDX license identifierSuman Anna1-9/+1
Use the appropriate SPDX license identifier in the OMAP Mailbox driver source files and drop the previous boilerplate license text. Signed-off-by: Suman Anna <s-anna@ti.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-08-03mailbox: xgene-slimpro: Fix potential NULL pointer dereferenceGustavo A. R. Silva1-3/+3
There is a potential execution path in which function platform_get_resource() returns NULL. If this happens, we will end up having a NULL pointer dereference. Fix this by replacing devm_ioremap with devm_ioremap_resource, which has the NULL check and the memory region request. This code was detected with the help of Coccinelle. Cc: stable@vger.kernel.org Fixes: f700e84f417b ("mailbox: Add support for APM X-Gene platform mailbox driver") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook4-13/+13
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook1-1/+2
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-07Merge tag 'mailbox-v4.18' of ↵Linus Torvalds5-7/+423
git://git.linaro.org/landing-teams/working/fujitsu/integration Pull mailbox updates from Jassi Brar: - Remove HAS_DMA config dependencies - New STMicroelectronics STM32 IPCC driver - Enable QCom driver to run more controllers - Fixed return code from null to ptr-err for Brcm driver - Fix kconfig dependencies for the HiSilicon driver * tag 'mailbox-v4.18' of git://git.linaro.org/landing-teams/working/fujitsu/integration: mailbox/drivers/hisi: Consolidate the Kconfig for the MAILBOX mailbox: Add support for Qualcomm SDM845 SoCs dt-bindings: mailbox: Add APSS shared binding for SDM845 SoCs mailbox: bcm2835: Fix of_xlate return value mailbox: qcom: Add msm8998 hmss compatible mailbox: add STMicroelectronics STM32 IPCC driver dt-bindings: mailbox: add STMicroelectronics STM32 IPCC binding mailbox: Remove depends on HAS_DMA in case of platform dependency
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 07:31:49 +0300