summaryrefslogtreecommitdiff
path: root/drivers/iommu/intel-iommu.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-17iommu/vt-d: Fix scatterlist offset handlingRobin Murphy1-3/+5
The intel-iommu DMA ops fail to correctly handle scatterlists where sg->offset is greater than PAGE_SIZE - the IOVA allocation is computed appropriately based on the page-aligned portion of the offset, but the mapping is set up relative to sg->page, which means it fails to actually cover the whole buffer (and in the worst case doesn't cover it at all): (sg->dma_address + sg->dma_len) ----+ sg->dma_address ---------+ | iov_pfn------+ | | | | | v v v iova: a b c d e f |--------|--------|--------|--------|--------| <...calculated....> [_____mapped______] pfn: 0 1 2 3 4 5 |--------|--------|--------|--------|--------| ^ ^ ^ | | | sg->page ----+ | | sg->offset --------------+ | (sg->offset + sg->length) ----------+ As a result, the caller ends up overrunning the mapping into whatever lies beyond, which usually goes badly: [ 429.645492] DMAR: DRHD: handling fault status reg 2 [ 429.650847] DMAR: [DMA Write] Request device [02:00.4] fault addr f2682000 ... Whilst this is a fairly rare occurrence, it can happen from the result of intermediate scatterlist processing such as scatterwalk_ffwd() in the crypto layer. Whilst that particular site could be fixed up, it still seems worthwhile to bring intel-iommu in line with other DMA API implementations in handling this robustly. To that end, fix the intel_map_sg() path to line up the mapping correctly (in units of MM pages rather than VT-d pages to match the aligned_nrpages() calculation) regardless of the offset, and use sg_phys() consistently for clarity. Reported-by: Harsh Jain <Harsh@chelsio.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Reviewed by: Ashok Raj <ashok.raj@intel.com> Tested by: Jacob Pan <jacob.jun.pan@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2017-10-13Merge branches 'iommu/fixes', 'arm/omap', 'arm/exynos', 'x86/amd', ↵Joerg Roedel1-11/+17
'x86/vt-d' and 'core' into next
2017-10-12iommu/iova: Make rcache flush optional on IOVA allocation failureTomasz Nowicki1-2/+3
Since IOVA allocation failure is not unusual case we need to flush CPUs' rcache in hope we will succeed in next round. However, it is useful to decide whether we need rcache flush step because of two reasons: - Not scalability. On large system with ~100 CPUs iterating and flushing rcache for each CPU becomes serious bottleneck so we may want to defer it. - free_cpu_cached_iovas() does not care about max PFN we are interested in. Thus we may flush our rcaches and still get no new IOVA like in the commonly used scenario: if (dma_limit > DMA_BIT_MASK(32) && dev_is_pci(dev)) iova = alloc_iova_fast(iovad, iova_len, DMA_BIT_MASK(32) >> shift); if (!iova) iova = alloc_iova_fast(iovad, iova_len, dma_limit >> shift); 1. First alloc_iova_fast() call is limited to DMA_BIT_MASK(32) to get PCI devices a SAC address 2. alloc_iova() fails due to full 32-bit space 3. rcaches contain PFNs out of 32-bit space so free_cpu_cached_iovas() throws entries away for nothing and alloc_iova() fails again 4. Next alloc_iova_fast() call cannot take advantage of rcache since we have just defeated caches. In this case we pick the slowest option to proceed. This patch reworks flushed_rcache local flag to be additional function argument instead and control rcache flush step. Also, it updates all users to do the flush as the last chance. Signed-off-by: Tomasz Nowicki <Tomasz.Nowicki@caviumnetworks.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-10-10iommu/vt-d: Delete unnecessary check in domain_context_mapping_one()Christos Gkekas1-1/+1
Variable did_old is unsigned so checking whether it is greater or equal to zero is not necessary. Signed-off-by: Christos Gkekas <chris.gekas@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-10-06iommu/vt-d: Don't register bus-notifier under dmar_global_lockJoerg Roedel1-0/+10
The notifier function will take the dmar_global_lock too, so lockdep complains about inverse locking order when the notifier is registered under the dmar_global_lock. Reported-by: Jan Kiszka <jan.kiszka@siemens.com> Fixes: 59ce0515cdaf ('iommu/vt-d: Update DRHD/RMRR/ATSR device scope caches when PCI hotplug happens') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-27iommu/iova: Make dma_32bit_pfn implicitZhen Lei1-8/+3
Now that the cached node optimisation can apply to all allocations, the couple of users which were playing tricks with dma_32bit_pfn in order to benefit from it can stop doing so. Conversely, there is also no need for all the other users to explicitly calculate a 'real' 32-bit PFN, when init_iova_domain() can happily do that itself from the page granularity. CC: Thierry Reding <thierry.reding@gmail.com> CC: Jonathan Hunter <jonathanh@nvidia.com> CC: David Airlie <airlied@linux.ie> CC: Sudeep Dutt <sudeep.dutt@intel.com> CC: Ashutosh Dixit <ashutosh.dixit@intel.com> Signed-off-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Tested-by: Zhen Lei <thunder.leizhen@huawei.com> Tested-by: Nate Watterson <nwatters@codeaurora.org> [rm: use iova_shift(), rewrote commit message] Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-09-10Merge tag 'iommu-updates-v4.14' of ↵Linus Torvalds1-190/+90
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "Slightly more changes than usual this time: - KDump Kernel IOMMU take-over code for AMD IOMMU. The code now tries to preserve the mappings of the kernel so that master aborts for devices are avoided. Master aborts cause some devices to fail in the kdump kernel, so this code makes the dump more likely to succeed when AMD IOMMU is enabled. - common flush queue implementation for IOVA code users. The code is still optional, but AMD and Intel IOMMU drivers had their own implementation which is now unified. - finish support for iommu-groups. All drivers implement this feature now so that IOMMU core code can rely on it. - finish support for 'struct iommu_device' in iommu drivers. All drivers now use the interface. - new functions in the IOMMU-API for explicit IO/TLB flushing. This will help to reduce the number of IO/TLB flushes when IOMMU drivers support this interface. - support for mt2712 in the Mediatek IOMMU driver - new IOMMU driver for QCOM hardware - system PM support for ARM-SMMU - shutdown method for ARM-SMMU-v3 - some constification patches - various other small improvements and fixes" * tag 'iommu-updates-v4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (87 commits) iommu/vt-d: Don't be too aggressive when clearing one context entry iommu: Introduce Interface for IOMMU TLB Flushing iommu/s390: Constify iommu_ops iommu/vt-d: Avoid calling virt_to_phys() on null pointer iommu/vt-d: IOMMU Page Request needs to check if address is canonical. arm/tegra: Call bus_set_iommu() after iommu_device_register() iommu/exynos: Constify iommu_ops iommu/ipmmu-vmsa: Make ipmmu_gather_ops const iommu/ipmmu-vmsa: Rereserving a free context before setting up a pagetable iommu/amd: Rename a few flush functions iommu/amd: Check if domain is NULL in get_domain() and return -EBUSY iommu/mediatek: Fix a build warning of BIT(32) in ARM iommu/mediatek: Fix a build fail of m4u_type iommu: qcom: annotate PM functions as __maybe_unused iommu/pamu: Fix PAMU boot crash memory: mtk-smi: Degrade SMI init to module_init iommu/mediatek: Enlarge the validate PA range for 4GB mode iommu/mediatek: Disable iommu clock when system suspend iommu/mediatek: Move pgtable allocation into domain_alloc iommu/mediatek: Merge 2 M4U HWs into one iommu domain ...
2017-09-09Merge tag 'pci-v4.14-changes' of ↵Linus Torvalds1-0/+7
git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci Pull PCI updates from Bjorn Helgaas: - add enhanced Downstream Port Containment support, which prints more details about Root Port Programmed I/O errors (Dongdong Liu) - add Layerscape ls1088a and ls2088a support (Hou Zhiqiang) - add MediaTek MT2712 and MT7622 support (Ryder Lee) - add MediaTek MT2712 and MT7622 MSI support (Honghui Zhang) - add Qualcom IPQ8074 support (Varadarajan Narayanan) - add R-Car r8a7743/5 device tree support (Biju Das) - add Rockchip per-lane PHY support for better power management (Shawn Lin) - fix IRQ mapping for hot-added devices by replacing the pci_fixup_irqs() boot-time design with a host bridge hook called at probe-time (Lorenzo Pieralisi, Matthew Minter) - fix race when enabling two devices that results in upstream bridge not being enabled correctly (Srinath Mannam) - fix pciehp power fault infinite loop (Keith Busch) - fix SHPC bridge MSI hotplug events by enabling bus mastering (Aleksandr Bezzubikov) - fix a VFIO issue by correcting PCIe capability sizes (Alex Williamson) - fix an INTD issue on Xilinx and possibly other drivers by unifying INTx IRQ domain support (Paul Burton) - avoid IOMMU stalls by marking AMD Stoney GPU ATS as broken (Joerg Roedel) - allow APM X-Gene device assignment to guests by adding an ACS quirk (Feng Kan) - fix driver crashes by disabling Extended Tags on Broadcom HT2100 (Extended Tags support is required for PCIe Receivers but not Requesters, and we now enable them by default when Requesters support them) (Sinan Kaya) - fix MSIs for devices that use phantom RIDs for DMA by assuming MSIs use the real Requester ID (not a phantom RID) (Robin Murphy) - prevent assignment of Intel VMD children to guests (which may be supported eventually, but isn't yet) by not associating an IOMMU with them (Jon Derrick) - fix Intel VMD suspend/resume by releasing IRQs on suspend (Scott Bauer) - fix a Function-Level Reset issue with Intel 750 NVMe by waiting longer (up to 60sec instead of 1sec) for device to become ready (Sinan Kaya) - fix a Function-Level Reset issue on iProc Stingray by working around hardware defects in the CRS implementation (Oza Pawandeep) - fix an issue with Intel NVMe P3700 after an iProc reset by adding a delay during shutdown (Oza Pawandeep) - fix a Microsoft Hyper-V lockdep issue by polling instead of blocking in compose_msi_msg() (Stephen Hemminger) - fix a wireless LAN driver timeout by clearing DesignWare MSI interrupt status after it is handled, not before (Faiz Abbas) - fix DesignWare ATU enable checking (Jisheng Zhang) - reduce Layerscape dependencies on the bootloader by doing more initialization in the driver (Hou Zhiqiang) - improve Intel VMD performance allowing allocation of more IRQ vectors than present CPUs (Keith Busch) - improve endpoint framework support for initial DMA mask, different BAR sizes, configurable page sizes, MSI, test driver, etc (Kishon Vijay Abraham I, Stan Drozd) - rework CRS support to add periodic messages while we poll during enumeration and after Function-Level Reset and prepare for possible other uses of CRS (Sinan Kaya) - clean up Root Port AER handling by removing unnecessary code and moving error handler methods to struct pcie_port_service_driver (Christoph Hellwig) - clean up error handling paths in various drivers (Bjorn Andersson, Fabio Estevam, Gustavo A. R. Silva, Harunobu Kurokawa, Jeffy Chen, Lorenzo Pieralisi, Sergei Shtylyov) - clean up SR-IOV resource handling by disabling VF decoding before updating the corresponding resource structs (Gavin Shan) - clean up DesignWare-based drivers by unifying quirks to update Class Code and Interrupt Pin and related handling of write-protected registers (Hou Zhiqiang) - clean up by adding empty generic pcibios_align_resource() and pcibios_fixup_bus() and removing empty arch-specific implementations (Palmer Dabbelt) - request exclusive reset control for several drivers to allow cleanup elsewhere (Philipp Zabel) - constify various structures (Arvind Yadav, Bhumika Goyal) - convert from full_name() to %pOF (Rob Herring) - remove unused variables from iProc, HiSi, Altera, Keystone (Shawn Lin) * tag 'pci-v4.14-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci: (170 commits) PCI: xgene: Clean up whitespace PCI: xgene: Define XGENE_PCI_EXP_CAP and use generic PCI_EXP_RTCTL offset PCI: xgene: Fix platform_get_irq() error handling PCI: xilinx-nwl: Fix platform_get_irq() error handling PCI: rockchip: Fix platform_get_irq() error handling PCI: altera: Fix platform_get_irq() error handling PCI: spear13xx: Fix platform_get_irq() error handling PCI: artpec6: Fix platform_get_irq() error handling PCI: armada8k: Fix platform_get_irq() error handling PCI: dra7xx: Fix platform_get_irq() error handling PCI: exynos: Fix platform_get_irq() error handling PCI: iproc: Clean up whitespace PCI: iproc: Rename PCI_EXP_CAP to IPROC_PCI_EXP_CAP PCI: iproc: Add 500ms delay during device shutdown PCI: Fix typos and whitespace errors PCI: Remove unused "res" variable from pci_resource_io() PCI: Correct kernel-doc of pci_vpd_srdt_size(), pci_vpd_srdt_tag() PCI/AER: Reformat AER register definitions iommu/vt-d: Prevent VMD child devices from being remapping targets x86/PCI: Use is_vmd() rather than relying on the domain number ...
2017-09-01Merge branches 'arm/exynos', 'arm/renesas', 'arm/rockchip', 'arm/omap', ↵Joerg Roedel1-190/+90
'arm/mediatek', 'arm/tegra', 'arm/qcom', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd', 's390' and 'core' into next
2017-09-01iommu/vt-d: Don't be too aggressive when clearing one context entryFilippo Sironi1-18/+24
Previously, we were invalidating context cache and IOTLB globally when clearing one context entry. This is a tad too aggressive. Invalidate the context cache and IOTLB for the interested device only. Signed-off-by: Filippo Sironi <sironi@amazon.de> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Acked-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-31iommu/vt-d: Prevent VMD child devices from being remapping targetsJon Derrick1-0/+7
VMD child devices must use the VMD endpoint's ID as the requester. Because of this, there needs to be a way to link the parent VMD endpoint's IOMMU group and associated mappings to the VMD child devices such that attaching and detaching child devices modify the endpoint's mappings, while preventing early detaching on a singular device removal or unbinding. The reassignment of individual VMD child devices devices to VMs is outside the scope of VMD, but may be implemented in the future. For now it is best to prevent any such attempts. Prevent VMD child devices from returning an IOMMU, which prevents it from exposing an iommu_group sysfs directory and allowing subsequent binding by userspace-access drivers such as VFIO. Signed-off-by: Jon Derrick <jonathan.derrick@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
2017-08-30iommu/vt-d: Avoid calling virt_to_phys() on null pointerAshok Raj1-1/+2
New kernels with debug show panic() from __phys_addr() checks. Avoid calling virt_to_phys() when pasid_state_tbl pointer is null To: Joerg Roedel <joro@8bytes.org> To: linux-kernel@vger.kernel.org> Cc: iommu@lists.linux-foundation.org Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jacob Pan <jacob.jun.pan@intel.com> Cc: Ashok Raj <ashok.raj@intel.com> Fixes: 2f26e0a9c9860 ('iommu/vt-d: Add basic SVM PASID support') Signed-off-by: Ashok Raj <ashok.raj@intel.com> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-15iommu/vt-d: Make use of iova deferred flushingJoerg Roedel1-159/+38
Remove the deferred flushing implementation in the Intel VT-d driver and use the one from the common iova code instead. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-08-15iommu: Fix wrong freeing of iommu_device->devJoerg Roedel1-1/+3
The struct iommu_device has a 'struct device' embedded into it, not as a pointer, but the whole struct. In the conversion of the iommu drivers to use struct iommu_device it was forgotten that the relase function for that struct device simply calls kfree() on the pointer. This frees memory that was never allocated and causes memory corruption. To fix this issue, use a pointer to struct device instead of embedding the whole struct. This needs some updates in the iommu sysfs code as well as the Intel VT-d and AMD IOMMU driver. Reported-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Fixes: 39ab9555c241 ('iommu: Add sysfs bindings for struct iommu_device') Cc: stable@vger.kernel.org # >= v4.11 Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-07-26iommu/vt-d: Don't free parent pagetable of the PTE we're addingDavid Dillow1-12/+26
When adding a large scatterlist entry that covers more than the L3 superpage size (1GB) but has an alignment such that we must use L2 superpages (2MB) , we give dma_pte_free_level() a range that causes it to free the L3 pagetable we're about to populate. We fix this by telling dma_pte_free_pagetable() about the pagetable level we're about to populate to prevent freeing it. For example, mapping a scatterlist with entry lengths 854MB and 1194MB at IOVA 0xffff80000000 would, when processing the 2MB-aligned second entry, cause pfn_to_dma_pte() to create a L3 directory to hold L2 superpages for the mapping at IOVA 0xffffc0000000. We would previously call dma_pte_free_pagetable(domain, 0xffffc0000, 0xfffffffff), which would free the L3 directory pfn_to_dma_pte() just created for IO PFN 0xffffc0000. Telling dma_pte_free_pagetable() to retain the L3 directories while using L2 superpages avoids the erroneous free. Signed-off-by: David Dillow <dillow@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-07-12Merge tag 'iommu-updates-v4.13' of ↵Linus Torvalds1-21/+5
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "This update comes with: - Support for lockless operation in the ARM io-pgtable code. This is an important step to solve the scalability problems in the common dma-iommu code for ARM - Some Errata workarounds for ARM SMMU implemenations - Rewrite of the deferred IO/TLB flush code in the AMD IOMMU driver. The code suffered from very high flush rates, with the new implementation the flush rate is down to ~1% of what it was before - Support for amd_iommu=off when booting with kexec. The problem here was that the IOMMU driver bailed out early without disabling the iommu hardware, if it was enabled in the old kernel - The Rockchip IOMMU driver is now available on ARM64 - Align the return value of the iommu_ops->device_group call-backs to not miss error values - Preempt-disable optimizations in the Intel VT-d and common IOVA code to help Linux-RT - Various other small cleanups and fixes" * tag 'iommu-updates-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (60 commits) iommu/vt-d: Constify intel_dma_ops iommu: Warn once when device_group callback returns NULL iommu/omap: Return ERR_PTR in device_group call-back iommu: Return ERR_PTR() values from device_group call-backs iommu/s390: Use iommu_group_get_for_dev() in s390_iommu_add_device() iommu/vt-d: Don't disable preemption while accessing deferred_flush() iommu/iova: Don't disable preempt around this_cpu_ptr() iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #126 iommu/arm-smmu-v3: Enable ACPI based HiSilicon CMD_PREFETCH quirk(erratum 161010701) iommu/arm-smmu-v3: Add workaround for Cavium ThunderX2 erratum #74 ACPI/IORT: Fixup SMMUv3 resource size for Cavium ThunderX2 SMMUv3 model iommu/arm-smmu-v3, acpi: Add temporary Cavium SMMU-V3 IORT model number definitions iommu/io-pgtable-arm: Use dma_wmb() instead of wmb() when publishing table iommu/io-pgtable: depend on !GENERIC_ATOMIC64 when using COMPILE_TEST with LPAE iommu/arm-smmu-v3: Remove io-pgtable spinlock iommu/arm-smmu: Remove io-pgtable spinlock iommu/io-pgtable-arm-v7s: Support lockless operation iommu/io-pgtable-arm: Support lockless operation iommu/io-pgtable: Introduce explicit coherency iommu/io-pgtable-arm-v7s: Refactor split_blk_unmap ...
2017-07-07Merge tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-0/+3
Pull dma-mapping infrastructure from Christoph Hellwig: "This is the first pull request for the new dma-mapping subsystem In this new subsystem we'll try to properly maintain all the generic code related to dma-mapping, and will further consolidate arch code into common helpers. This pull request contains: - removal of the DMA_ERROR_CODE macro, replacing it with calls to ->mapping_error so that the dma_map_ops instances are more self contained and can be shared across architectures (me) - removal of the ->set_dma_mask method, which duplicates the ->dma_capable one in terms of functionality, but requires more duplicate code. - various updates for the coherent dma pool and related arm code (Vladimir) - various smaller cleanups (me)" * tag 'dma-mapping-4.13' of git://git.infradead.org/users/hch/dma-mapping: (56 commits) ARM: dma-mapping: Remove traces of NOMMU code ARM: NOMMU: Set ARM_DMA_MEM_BUFFERABLE for M-class cpus ARM: NOMMU: Introduce dma operations for noMMU drivers: dma-mapping: allow dma_common_mmap() for NOMMU drivers: dma-coherent: Introduce default DMA pool drivers: dma-coherent: Account dma_pfn_offset when used with device tree dma: Take into account dma_pfn_offset dma-mapping: replace dmam_alloc_noncoherent with dmam_alloc_attrs dma-mapping: remove dmam_free_noncoherent crypto: qat - avoid an uninitialized variable warning au1100fb: remove a bogus dma_free_nonconsistent call MAINTAINERS: add entry for dma mapping helpers powerpc: merge __dma_set_mask into dma_set_mask dma-mapping: remove the set_dma_mask method powerpc/cell: use the dma_supported method for ops switching powerpc/cell: clean up fixed mapping dma_ops initialization tile: remove dma_supported and mapping_error methods xen-swiotlb: remove xen_swiotlb_set_dma_mask arm: implement ->dma_supported instead of ->set_dma_mask mips/loongson64: implement ->dma_supported instead of ->set_dma_mask ...
2017-06-28x86: remove arch specific dma_supported implementationChristoph Hellwig1-0/+3
And instead wire it up as method for all the dma_map_ops instances. Note that this also means the arch specific check will be fully instead of partially applied in the AMD iommu driver. Signed-off-by: Christoph Hellwig <hch@lst.de>
2017-06-28Merge branches 'iommu/fixes', 'arm/rockchip', 'arm/renesas', 'arm/smmu', ↵Joerg Roedel1-21/+5
'arm/core', 'x86/vt-d', 'x86/amd', 's390' and 'core' into next
2017-06-28iommu/vt-d: Constify intel_dma_opsArvind Yadav1-1/+1
Most dma_map_ops structures are never modified. Constify these structures such that these can be write-protected. Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-06-28iommu/vt-d: Don't disable preemption while accessing deferred_flush()Sebastian Andrzej Siewior1-6/+2
get_cpu() disables preemption and returns the current CPU number. The CPU number is only used once while retrieving the address of the local's CPU deferred_flush pointer. We can instead use raw_cpu_ptr() while we remain preemptible. The worst thing that can happen is that flush_unmaps_timeout() is invoked multiple times: once by taskA after seeing HIGH_WATER_MARK and then preempted to another CPU and then by taskB which saw HIGH_WATER_MARK on the same CPU as taskA. It is also likely that ->size got from HIGH_WATER_MARK to 0 right after its read because another CPU invoked flush_unmaps_timeout() for this CPU. The access to flush_data is protected by a spinlock so even if we get migrated to another CPU or preempted - the data structure is protected. While at it, I marked deferred_flush static since I can't find a reference to it outside of this file. Cc: David Woodhouse <dwmw2@infradead.org> Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-05-30iommu/vt-d: Unwrap __get_valid_domain_for_dev()Peter Xu1-14/+2
We do find_domain() in __get_valid_domain_for_dev(), while we do the same thing in get_valid_domain_for_dev(). No need to do it twice. Signed-off-by: Peter Xu <peterx@redhat.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-05-23iommu/vt-d: Adjust system_state checksThomas Gleixner1-2/+2
To enable smp_processor_id() and might_sleep() debug checks earlier, it's required to add system states between SYSTEM_BOOTING and SYSTEM_RUNNING. Adjust the system_state checks in dmar_parse_one_atsr() and dmar_iommu_notify_scope_dev() to handle the extra states. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org> Acked-by: Joerg Roedel <joro@8bytes.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: iommu@lists.linux-foundation.org Link: http://lkml.kernel.org/r/20170516184735.712365947@linutronix.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-05-17iommu/vt-d: Flush the IOTLB to get rid of the initial kdump mappingsKarimAllah Ahmed1-1/+4
Ever since commit 091d42e43d ("iommu/vt-d: Copy translation tables from old kernel") the kdump kernel copies the IOMMU context tables from the previous kernel. Each device mappings will be destroyed once the driver for the respective device takes over. This unfortunately breaks the workflow of mapping and unmapping a new context to the IOMMU. The mapping function assumes that either: 1) Unmapping did the proper IOMMU flushing and it only ever flush if the IOMMU unit supports caching invalid entries. 2) The system just booted and the initialization code took care of flushing all IOMMU caches. This assumption is not true for the kdump kernel since the context tables have been copied from the previous kernel and translations could have been cached ever since. So make sure to flush the IOTLB as well when we destroy these old copied mappings. Cc: Joerg Roedel <joro@8bytes.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: David Woodhouse <dwmw@amazon.co.uk> Cc: Anthony Liguori <aliguori@amazon.com> Signed-off-by: KarimAllah Ahmed <karahmed@amazon.de> Acked-by: David Woodhouse <dwmw@amazon.co.uk> Cc: stable@vger.kernel.org v4.2+ Fixes: 091d42e43d ("iommu/vt-d: Copy translation tables from old kernel") Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-05-04Merge branches 'arm/exynos', 'arm/omap', 'arm/rockchip', 'arm/mediatek', ↵Joerg Roedel1-3/+37
'arm/smmu', 'arm/core', 'x86/vt-d', 'x86/amd' and 'core' into next
2017-04-27x86, iommu/vt-d: Add an option to disable Intel IOMMU force onShaohua Li1-0/+18
IOMMU harms performance signficantly when we run very fast networking workloads. It's 40GB networking doing XDP test. Software overhead is almost unaware, but it's the IOTLB miss (based on our analysis) which kills the performance. We observed the same performance issue even with software passthrough (identity mapping), only the hardware passthrough survives. The pps with iommu (with software passthrough) is only about ~30% of that without it. This is a limitation in hardware based on our observation, so we'd like to disable the IOMMU force on, but we do want to use TBOOT and we can sacrifice the DMA security bought by IOMMU. I must admit I know nothing about TBOOT, but TBOOT guys (cc-ed) think not eabling IOMMU is totally ok. So introduce a new boot option to disable the force on. It's kind of silly we need to run into intel_iommu_init even without force on, but we need to disable TBOOT PMR registers. For system without the boot option, nothing is changed. Signed-off-by: Shaohua Li <shli@fb.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-29iommu/vt-d: Make sure IOMMUs are off when intel_iommu=offJoerg Roedel1-1/+17
When booting into a kexec kernel with intel_iommu=off, and the previous kernel had intel_iommu=on, the IOMMU hardware is still enabled and gets not disabled by the new kernel. This causes the boot to fail because DMA is blocked by the hardware. Disable the IOMMUs when we find it enabled in the kexec kernel and boot with intel_iommu=off. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22iommu: Disambiguate MSI region typesRobin Murphy1-1/+1
The introduction of reserved regions has left a couple of rough edges which we could do with sorting out sooner rather than later. Since we are not yet addressing the potential dynamic aspect of software-managed reservations and presenting them at arbitrary fixed addresses, it is incongruous that we end up displaying hardware vs. software-managed MSI regions to userspace differently, especially since ARM-based systems may actually require one or the other, or even potentially both at once, (which iommu-dma currently has no hope of dealing with at all). Let's resolve the former user-visible inconsistency ASAP before the ABI has been baked into a kernel release, in a way that also lays the groundwork for the latter shortcoming to be addressed by follow-up patches. For clarity, rename the software-managed type to IOMMU_RESV_SW_MSI, use IOMMU_RESV_MSI to describe the hardware type, and document everything a little bit. Since the x86 MSI remapping hardware falls squarely under this meaning of IOMMU_RESV_MSI, apply that type to their regions as well, so that we tell the same story to userspace across all platforms. Secondly, as the various region types require quite different handling, and it really makes little sense to ever try combining them, convert the bitfield-esque #defines to a plain enum in the process before anyone gets the wrong impression. Fixes: d30ddcaa7b02 ("iommu: Add a new type field in iommu_resv_region") Reviewed-by: Eric Auger <eric.auger@redhat.com> CC: Alex Williamson <alex.williamson@redhat.com> CC: David Woodhouse <dwmw2@infradead.org> CC: kvm@vger.kernel.org Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-03-22iommu/vt-d: Fix NULL pointer dereference in device_to_iommuKoos Vriezen1-1/+1
The function device_to_iommu() in the Intel VT-d driver lacks a NULL-ptr check, resulting in this oops at boot on some platforms: BUG: unable to handle kernel NULL pointer dereference at 00000000000007ab IP: [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0 PGD 0 [...] Call Trace: ? find_or_alloc_domain.constprop.29+0x1a/0x300 ? dw_dma_probe+0x561/0x580 [dw_dmac_core] ? __get_valid_domain_for_dev+0x39/0x120 ? __intel_map_single+0x138/0x180 ? intel_alloc_coherent+0xb6/0x120 ? sst_hsw_dsp_init+0x173/0x420 [snd_soc_sst_haswell_pcm] ? mutex_lock+0x9/0x30 ? kernfs_add_one+0xdb/0x130 ? devres_add+0x19/0x60 ? hsw_pcm_dev_probe+0x46/0xd0 [snd_soc_sst_haswell_pcm] ? platform_drv_probe+0x30/0x90 ? driver_probe_device+0x1ed/0x2b0 ? __driver_attach+0x8f/0xa0 ? driver_probe_device+0x2b0/0x2b0 ? bus_for_each_dev+0x55/0x90 ? bus_add_driver+0x110/0x210 ? 0xffffffffa11ea000 ? driver_register+0x52/0xc0 ? 0xffffffffa11ea000 ? do_one_initcall+0x32/0x130 ? free_vmap_area_noflush+0x37/0x70 ? kmem_cache_alloc+0x88/0xd0 ? do_init_module+0x51/0x1c4 ? load_module+0x1ee9/0x2430 ? show_taint+0x20/0x20 ? kernel_read_file+0xfd/0x190 ? SyS_finit_module+0xa3/0xb0 ? do_syscall_64+0x4a/0xb0 ? entry_SYSCALL64_slow_path+0x25/0x25 Code: 78 ff ff ff 4d 85 c0 74 ee 49 8b 5a 10 0f b6 9b e0 00 00 00 41 38 98 e0 00 00 00 77 da 0f b6 eb 49 39 a8 88 00 00 00 72 ce eb 8f <41> f6 82 ab 07 00 00 04 0f 85 76 ff ff ff 0f b6 4d 08 88 0e 49 RIP [<ffffffff8132234a>] device_to_iommu+0x11a/0x1a0 RSP <ffffc90001457a78> CR2: 00000000000007ab ---[ end trace 16f974b6d58d0aad ]--- Add the missing pointer check. Fixes: 1c387188c60f53b338c20eee32db055dfe022a9b ("iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions") Signed-off-by: Koos Vriezen <koos.vriezen@gmail.com> Cc: stable@vger.kernel.org # 4.8.15+ Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-28iommu/vt-d: Fix crash when accessing VT-d sysfs entriesJoerg Roedel1-6/+11
The link between the iommu sysfs-device and the struct intel_iommu is no longer stored as driver-data. Update the code to use the new access method. Reported-by: Dave Jones <davej@codemonkey.org.uk> Fixes: 39ab9555c241 ('iommu: Add sysfs bindings for struct iommu_device') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-25mm: wire up GFP flag passing in dma_alloc_from_contiguousLucas Stach1-1/+1
The callers of the DMA alloc functions already provide the proper context GFP flags. Make sure to pass them through to the CMA allocator, to make the CMA compaction context aware. Link: http://lkml.kernel.org/r/20170127172328.18574-3-l.stach@pengutronix.de Signed-off-by: Lucas Stach <l.stach@pengutronix.de> Acked-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Radim Krcmar <rkrcmar@redhat.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Chris Zankel <chris@zankel.net> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Alexander Graf <agraf@suse.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2017-02-10Merge branches 'iommu/fixes', 'arm/exynos', 'arm/renesas', 'arm/smmu', ↵Joerg Roedel1-28/+88
'arm/mediatek', 'arm/core', 'x86/vt-d' and 'core' into next
2017-02-10iommu: Make iommu_device_link/unlink take a struct iommu_deviceJoerg Roedel1-2/+2
This makes the interface more consistent with iommu_device_sysfs_add/remove. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10iommu: Add sysfs bindings for struct iommu_deviceJoerg Roedel1-6/+9
There is currently support for iommu sysfs bindings, but those need to be implemented in the IOMMU drivers. Add a more generic version of this by adding a struct device to struct iommu_device and use that for the sysfs bindings. Also convert the AMD and Intel IOMMU driver to make use of it. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-02-10iommu: Introduce new 'struct iommu_device'Joerg Roedel1-2/+2
This struct represents one hardware iommu in the iommu core code. For now it only has the iommu-ops associated with it, but that will be extended soon. The register/unregister interface is also added, as well as making use of it in the Intel and AMD IOMMU drivers. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-01-31iommu/vt-d: Don't over-free page table directoriesDavid Dillow1-1/+1
dma_pte_free_level() recurses down the IOMMU page tables and frees directory pages that are entirely contained in the given PFN range. Unfortunately, it incorrectly calculates the starting address covered by the PTE under consideration, which can lead to it clearing an entry that is still in use. This occurs if we have a scatterlist with an entry that has a length greater than 1026 MB and is aligned to 2 MB for both the IOMMU and physical addresses. For example, if __domain_mapping() is asked to map a two-entry scatterlist with 2 MB and 1028 MB segments to PFN 0xffff80000, it will ask if dma_pte_free_pagetable() is asked to PFNs from 0xffff80200 to 0xffffc05ff, it will also incorrectly clear the PFNs from 0xffff80000 to 0xffff801ff because of this issue. The current code will set level_pfn to 0xffff80200, and 0xffff80200-0xffffc01ff fits inside the range being cleared. Properly setting the level_pfn for the current level under consideration catches that this PTE is outside of the range being cleared. This patch also changes the value passed into dma_pte_free_level() when it recurses. This only affects the first PTE of the range being cleared, and is handled by the existing code that ensures we start our cursor no lower than start_pfn. This was found when using dma_map_sg() to map large chunks of contiguous memory, which immediatedly led to faults on the first access of the erroneously-deleted mappings. Fixes: 3269ee0bd668 ("intel-iommu: Fix leaks in pagetable freeing") Reviewed-by: Benjamin Serebrin <serebrin@google.com> Signed-off-by: David Dillow <dillow@google.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-01-31iommu/vt-d: Tylersburg isoch identity map check is done too late.Ashok Raj1-1/+2
The check to set identity map for tylersburg is done too late. It needs to be done before the check for identity_map domain is done. To: Joerg Roedel <joro@8bytes.org> To: David Woodhouse <dwmw2@infradead.org> Cc: iommu@lists.linux-foundation.org Cc: linux-kernel@vger.kernel.org Cc: stable@vger.kernel.org Cc: Ashok Raj <ashok.raj@intel.com> Fixes: 86080ccc22 ("iommu/vt-d: Allocate si_domain in init_dmars()") Signed-off-by: Ashok Raj <ashok.raj@intel.com> Reported-by: Yunhong Jiang <yunhong.jiang@intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-01-23iommu/vt-d: Implement reserved region get/put callbacksEric Auger1-18/+74
This patch registers the [FEE0_0000h - FEF0_000h] 1MB MSI range as a reserved region and RMRR regions as direct regions. This will allow to report those reserved regions in the iommu-group sysfs. Signed-off-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Will Deacon <will.deacon@arm.com>
2017-01-04iommu/vt-d: Fix pasid table size encodingJacob Pan1-1/+22
Different encodings are used to represent supported PASID bits and number of PASID table entries. The current code assigns ecap_pss directly to extended context table entry PTS which is wrong and could result in writing non-zero bits to the reserved fields. IOMMU fault reason 11 will be reported when reserved bits are nonzero. This patch converts ecap_pss to extend context entry pts encoding based on VT-d spec. Chapter 9.4 as follows: - number of PASID bits = ecap_pss + 1 - number of PASID table entries = 2^(pts + 5) Software assigned limit of pasid_max value is also respected to match the allocation limitation of PASID table. cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> cc: Ashok Raj <ashok.raj@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Tested-by: Mika Kuoppala <mika.kuoppala@intel.com> Fixes: 2f26e0a9c9860 ('iommu/vt-d: Add basic SVM PASID support') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2017-01-04iommu/vt-d: Flush old iommu caches for kdump when the device gets context mappedXunlei Pang1-0/+19
We met the DMAR fault both on hpsa P420i and P421 SmartArray controllers under kdump, it can be steadily reproduced on several different machines, the dmesg log is like: HP HPSA Driver (v 3.4.16-0) hpsa 0000:02:00.0: using doorbell to reset controller hpsa 0000:02:00.0: board ready after hard reset. hpsa 0000:02:00.0: Waiting for controller to respond to no-op DMAR: Setting identity map for device 0000:02:00.0 [0xe8000 - 0xe8fff] DMAR: Setting identity map for device 0000:02:00.0 [0xf4000 - 0xf4fff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6e000 - 0xbdf6efff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf6f000 - 0xbdf7efff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf7f000 - 0xbdf82fff] DMAR: Setting identity map for device 0000:02:00.0 [0xbdf83000 - 0xbdf84fff] DMAR: DRHD: handling fault status reg 2 DMAR: [DMA Read] Request device [02:00.0] fault addr fffff000 [fault reason 06] PTE Read access is not set hpsa 0000:02:00.0: controller message 03:00 timed out hpsa 0000:02:00.0: no-op failed; re-trying After some debugging, we found that the fault addr is from DMA initiated at the driver probe stage after reset(not in-flight DMA), and the corresponding pte entry value is correct, the fault is likely due to the old iommu caches of the in-flight DMA before it. Thus we need to flush the old cache after context mapping is setup for the device, where the device is supposed to finish reset at its driver probe stage and no in-flight DMA exists hereafter. I'm not sure if the hardware is responsible for invalidating all the related caches allocated in the iommu hardware before, but seems not the case for hpsa, actually many device drivers have problems in properly resetting the hardware. Anyway flushing (again) by software in kdump kernel when the device gets context mapped which is a quite infrequent operation does little harm. With this patch, the problematic machine can survive the kdump tests. CC: Myron Stowe <myron.stowe@gmail.com> CC: Joseph Szczypek <jszczype@redhat.com> CC: Don Brace <don.brace@microsemi.com> CC: Baoquan He <bhe@redhat.com> CC: Dave Young <dyoung@redhat.com> Fixes: 091d42e43d21 ("iommu/vt-d: Copy translation tables from old kernel") Fixes: dbcd861f252d ("iommu/vt-d: Do not re-use domain-ids from the old kernel") Fixes: cf484d0e6939 ("iommu/vt-d: Mark copied context entries") Signed-off-by: Xunlei Pang <xlpang@redhat.com> Tested-by: Don Brace <don.brace@microsemi.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-12-13Merge branch 'smp-hotplug-for-linus' of ↵Linus Torvalds1-18/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull smp hotplug updates from Thomas Gleixner: "This is the final round of converting the notifier mess to the state machine. The removal of the notifiers and the related infrastructure will happen around rc1, as there are conversions outstanding in other trees. The whole exercise removed about 2000 lines of code in total and in course of the conversion several dozen bugs got fixed. The new mechanism allows to test almost every hotplug step standalone, so usage sites can exercise all transitions extensively. There is more room for improvement, like integrating all the pointlessly different architecture mechanisms of synchronizing, setting cpus online etc into the core code" * 'smp-hotplug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (60 commits) tracing/rb: Init the CPU mask on allocation soc/fsl/qbman: Convert to hotplug state machine soc/fsl/qbman: Convert to hotplug state machine zram: Convert to hotplug state machine KVM/PPC/Book3S HV: Convert to hotplug state machine arm64/cpuinfo: Convert to hotplug state machine arm64/cpuinfo: Make hotplug notifier symmetric mm/compaction: Convert to hotplug state machine iommu/vt-d: Convert to hotplug state machine mm/zswap: Convert pool to hotplug state machine mm/zswap: Convert dst-mem to hotplug state machine mm/zsmalloc: Convert to hotplug state machine mm/vmstat: Convert to hotplug state machine mm/vmstat: Avoid on each online CPU loops mm/vmstat: Drop get_online_cpus() from init_cpu_node_state/vmstat_cpu_dead() tracing/rb: Convert to hotplug state machine oprofile/nmi timer: Convert to hotplug state machine net/iucv: Use explicit clean up labels in iucv_init() x86/pci/amd-bus: Convert to hotplug state machine x86/oprofile/nmi: Convert to hotplug state machine ...
2016-12-02iommu/vt-d: Convert to hotplug state machineAnna-Maria Gleixner1-18/+6
Install the callbacks via the state machine. Signed-off-by: Anna-Maria Gleixner <anna-maria@linutronix.de> Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: iommu@lists.linux-foundation.org Cc: rt@linutronix.de Cc: David Woodhouse <dwmw2@infradead.org> Link: http://lkml.kernel.org/r/20161126231350.10321-14-bigeasy@linutronix.de Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2016-11-27Merge git://git.infradead.org/intel-iommuLinus Torvalds1-0/+13
Pull IOMMU fixes from David Woodhouse: "Two minor fixes. The first fixes the assignment of SR-IOV virtual functions to the correct IOMMU unit, and the second fixes the excessively large (and physically contiguous) PASID tables used with SVM" * git://git.infradead.org/intel-iommu: iommu/vt-d: Fix PASID table allocation iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual Functions
2016-11-08iommu/vt-d: Fix dead-locks in disable_dmar_iommu() pathJoerg Roedel1-2/+12
It turns out that the disable_dmar_iommu() code-path tried to get the device_domain_lock recursivly, which will dead-lock when this code runs on dmar removal. Fix both code-paths that could lead to the dead-lock. Fixes: 55d940430ab9 ('iommu/vt-d: Get rid of domain->iommu_lock') Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-10-30iommu/vt-d: Fix IOMMU lookup for SR-IOV Virtual FunctionsAshok Raj1-0/+13
The VT-d specification (§8.3.3) says: ‘Virtual Functions’ of a ‘Physical Function’ are under the scope of the same remapping unit as the ‘Physical Function’. The BIOS is not required to list all the possible VFs in the scope tables, and arguably *shouldn't* make any attempt to do so, since there could be a huge number of them. This has been broken basically for ever — the VF is never going to match against a specific unit's scope, so it ends up being assigned to the INCLUDE_ALL IOMMU. Which was always actually correct by coincidence, but now we're looking at Root-Complex integrated devices with SR-IOV support it's going to start being wrong. Fix it to simply use pci_physfn() before doing the lookup for PCI devices. Cc: stable@vger.kernel.org Signed-off-by: Sainath Grandhi <sainath.grandhi@intel.com> Signed-off-by: Ashok Raj <ashok.raj@intel.com> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2016-09-05iommu/vt-d: Make sure RMRRs are mapped before domain goes publicJoerg Roedel1-7/+20
When a domain is allocated through the get_valid_domain_for_dev path, it will be context-mapped before the RMRR regions are mapped in the page-table. This opens a short time window where device-accesses to these regions fail and causing DMAR faults. Fix this by mapping the RMRR regions before the domain is context-mapped. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-09-05iommu/vt-d: Split up get_domain_for_dev functionJoerg Roedel1-21/+55
Split out the search for an already existing domain and the context mapping of the device to the new domain. This allows to map possible RMRR regions into the domain before it is context mapped. Signed-off-by: Joerg Roedel <jroedel@suse.de>
2016-08-04dma-mapping: use unsigned long for dma_attrsKrzysztof Kozlowski1-6/+6
The dma-mapping core and the implementations do not change the DMA attributes passed by pointer. Thus the pointer can point to const data. However the attributes do not have to be a bitfield. Instead unsigned long will do fine: 1. This is just simpler. Both in terms of reading the code and setting attributes. Instead of initializing local attributes on the stack and passing pointer to it to dma_set_attr(), just set the bits. 2. It brings safeness and checking for const correctness because the attributes are passed by value. Semantic patches for this change (at least most of them): virtual patch virtual context @r@ identifier f, attrs; @@ f(..., - struct dma_attrs *attrs + unsigned long attrs , ...) { ... } @@ identifier r.f; @@ f(..., - NULL + 0 ) and // Options: --all-includes virtual patch virtual context @r@ identifier f, attrs; type t; @@ t f(..., struct dma_attrs *attrs); @@ identifier r.f; @@ f(..., - NULL + 0 ) Link: http://lkml.kernel.org/r/1468399300-5399-2-git-send-email-k.kozlowski@samsung.com Signed-off-by: Krzysztof Kozlowski <k.kozlowski@samsung.com> Acked-by: Vineet Gupta <vgupta@synopsys.com> Acked-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> Acked-by: Mark Salter <msalter@redhat.com> [c6x] Acked-by: Jesper Nilsson <jesper.nilsson@axis.com> [cris] Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> [drm] Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com> Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Fabien Dessenne <fabien.dessenne@st.com> [bdisp] Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com> [vb2-core] Acked-by: David Vrabel <david.vrabel@citrix.com> [xen] Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen swiotlb] Acked-by: Joerg Roedel <jroedel@suse.de> [iommu] Acked-by: Richard Kuo <rkuo@codeaurora.org> [hexagon] Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> [m68k] Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> [s390] Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> Acked-by: Hans-Christian Noren Egtvedt <egtvedt@samfundet.no> [avr32] Acked-by: Vineet Gupta <vgupta@synopsys.com> [arc] Acked-by: Robin Murphy <robin.murphy@arm.com> [arm64 and dma-iommu] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2016-08-01Merge tag 'iommu-updates-v4.8' of ↵Linus Torvalds1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: - big-endian support and preparation for defered probing for the Exynos IOMMU driver - simplifications in iommu-group id handling - support for Mediatek generation one IOMMU hardware - conversion of the AMD IOMMU driver to use the generic IOVA allocator. This driver now also benefits from the recent scalability improvements in the IOVA code. - preparations to use generic DMA mapping code in the Rockchip IOMMU driver - device tree adaption and conversion to use generic page-table code for the MSM IOMMU driver - an iova_to_phys optimization in the ARM-SMMU driver to greatly improve page-table teardown performance with VFIO - various other small fixes and conversions * tag 'iommu-updates-v4.8' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (59 commits) iommu/amd: Initialize dma-ops domains with 3-level page-table iommu/amd: Update Alias-DTE in update_device_table() iommu/vt-d: Return error code in domain_context_mapping_one() iommu/amd: Use container_of to get dma_ops_domain iommu/amd: Flush iova queue before releasing dma_ops_domain iommu/amd: Handle IOMMU_DOMAIN_DMA in ops->domain_free call-back iommu/amd: Use dev_data->domain in get_domain() iommu/amd: Optimize map_sg and unmap_sg iommu/amd: Introduce dir2prot() helper iommu/amd: Implement timeout to flush unmap queues iommu/amd: Implement flush queue iommu/amd: Allow NULL pointer parameter for domain_flush_complete() iommu/amd: Set up data structures for flush queue iommu/amd: Remove align-parameter from __map_single() iommu/amd: Remove other remains of old address allocator iommu/amd: Make use of the generic IOVA allocator iommu/amd: Remove special mapping code for dma_ops path iommu/amd: Pass gfp-flags to iommu_map_page() iommu/amd: Implement apply_dm_region call-back iommu/amd: Create a list of reserved iova addresses ...
2016-07-28Add braces to avoid "ambiguous ‘else’" compiler warningsLinus Torvalds1-1/+2
Some of our "for_each_xyz()" macro constructs make gcc unhappy about lack of braces around if-statements inside or outside the loop, because the loop construct itself has a "if-then-else" statement inside of it. The resulting warnings look something like this: drivers/gpu/drm/i915/i915_debugfs.c: In function ‘i915_dump_lrc’: drivers/gpu/drm/i915/i915_debugfs.c:2103:6: warning: suggest explicit braces to avoid ambiguous ‘else’ [-Wparentheses] if (ctx != dev_priv->kernel_context) ^ even if the code itself is fine. Since the warning is fairly easy to avoid by adding a braces around the if-statement near the for_each_xyz() construct, do so, rather than disabling the otherwise potentially useful warning. (The if-then-else statements used in the "for_each_xyz()" constructs are designed to be inherently safe even with no braces, but in this case it's quite understandable that gcc isn't really able to tell that). This finally leaves the standard "allmodconfig" build with just a handful of remaining warnings, so new and valid warnings hopefully will stand out. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 03:11:52 +0300