summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2021-01-25Input: iqs5xx - allow device to be a wake-up sourceJeff LaBundy1-2/+2
Avoid placing the device in suspend mode (from which it cannot generate interrupts) if it is defined as a wake-up source. The device is still permitted to enter a low-power sensing mode on its own. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-11-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-25Input: iqs5xx - allow more time for ATI to completeJeff LaBundy1-6/+5
After the device is initialized, it runs ATI (calibration) during which it cannot readily respond to I2C communication. To keep the open and close callbacks from writing to the device too soon, the driver waits 100 ms before returning from probe. The vendor reports that ATI may actually take up to 250 ms to run (including margin), so increase the delay accordingly. Update the comments to clarify the reason for the delay as well. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-9-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-25Input: iqs5xx - eliminate unnecessary register readJeff LaBundy1-19/+12
Instead of relying on firmware to enable important register fields and performing read-modify-write operations to additionally enable the fields the driver cares about, it's much simpler just to write all of the pertinent fields explicitly. This avoids an unnecessary register read operation at start-up and makes way for the iqs5xx_read_byte() helper to be dropped. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-8-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-25Input: iqs5xx - simplify axis setup logicJeff LaBundy1-79/+21
The present implementation manipulates axis swap and inversion fields in the device to more or less duplicate what touchscreen_report_pos() does. The resulting logic is convoluted and difficult to follow. Instead report the maximum X and Y coordinates in earnest as they are read from the device, then let touchscreen_parse_properties() fix the axes up as necessary. Finally, use touchscreen_report_pos() to report the transformed coordinates. Last but not least, the maximum X and Y coordinates are not functions of the number of rows/columns that comprise the touch surface. Either coordinate is simply limited to 1 below what is reported for absolute X or Y coordinates when no fingers are present (0xFFFF). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-7-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-25Input: iqs5xx - re-initialize device upon warm resetJeff LaBundy1-11/+41
The device may be inadvertently reset during runtime in the event of ESD strike, etc. To protect against this case, acknowledge the SHOW_RESET interrupt and re-initialize the device. To facilitate this change, expand the range of registers that are read in the interrupt handler to include the system status fields. Also, update the unrelated (but nearby) SUSPEND register field to use the BIT() macro. The remaining register fields are cleaned up in another patch. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-6-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-25Input: iqs5xx - accommodate bootloader latencyJeff LaBundy1-2/+7
The bootloader NAK's all I2C communication after the first 64-byte bulk write if the bus frequency is equal to 400 kHz. This prevents the platform from pushing updated firmware to the device. The vendor's USB bootloader programming dongle appears to insert a delay between the "open" command and the first 64-byte bulk write. Adding a similar delay to the driver seems to eliminate the issue. Furthermore, the dongle does not access the bootloader immediately after powering up the device. Follow suit by adding a delay before the "open" command to avoid wasted retries at 400 kHz. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-4-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-25Input: iqs5xx - preserve bootloader errorsJeff LaBundy1-1/+5
After user space writes the fw_file attribute to push new firmware to the device, the driver calls iqs5xx_dev_init() to re-initialize the device with the updated firmware or recover the device in case the update failed. In the case of the latter, however, iqs5xx_fw_file_write() returns zero (success) so long as iqs5xx_dev_init() does not fail, and any error encountered during the update process is lost. Solve this by saving the error before calling iqs5xx_dev_init(). Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-3-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-25Input: iqs5xx - minor cosmetic improvementsJeff LaBundy1-4/+4
Copyrights are generally followed by the name of a person or a company (i.e. the copyright holder) but that was not done here. Fix this by squashing the 'copyright' and 'author' lines. Also, trim some leading whitespace ahead of the parameters for the fw_file_store() function and re-align them for readability. Signed-off-by: Jeff LaBundy <jeff@labundy.com> Link: https://lore.kernel.org/r/1611002626-5889-2-git-send-email-jeff@labundy.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-25Input: xpad - sync supported devices with fork on GitHubBenjamin Valentin1-1/+16
There is a fork of this driver on GitHub [0] that has been updated with new device IDs. Merge those into the mainline driver, so the out-of-tree fork is not needed for users of those devices anymore. [0] https://github.com/paroj/xpad Signed-off-by: Benjamin Valentin <benpicco@googlemail.com> Link: https://lore.kernel.org/r/20210121142523.1b6b050f@rechenknecht2k11 Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-25Input: elants_i2c - add support for eKTF3624Michał Mirosław1-17/+135
Add ELAN KTF3624 touchscreen support to the elants_i2c driver. The eKTF3624 TS is found on a series of ASUS Transformer tablet devices, Nexus 7 tablet and etc. The firmware interface of eKTF3624 is nearly identical to eKTH3500, which is already supported by the driver. The minor differences of the firmware interface are now handled by the driver. The eKTF3624 support was tested on ASUS Transformer TF700T, TF300T and Nexus 7 tablets. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20210124195414.27333-1-digetx@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-21Merge branch 'tty-splice' of ↵Greg Kroah-Hartman1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux into tty-next Fixes both the "splice/sendfile to a tty" and "splice/sendfile from a tty" regression from 5.10. * 'tty-splice' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux: tty: teach the n_tty ICANON case about the new "cookie continuations" too tty: teach n_tty line discipline about the new "cookie continuations" tty: clean up legacy leftovers from n_tty line discipline tty: implement read_iter tty: convert tty_ldisc_ops 'read()' function to take a kernel pointer tty: implement write_iter
2021-01-21Input: ads7846 - convert to one messageOleksij Rempel1-183/+193
Convert multiple full duplex transfers in to a single transfer to reduce CPU load. Current driver version support following filtering modes: - ads7846_no_filter() - not filtered - ads7846_debounce_filter() - driver specific debounce filter - pdata->filter - platform specific debounce filter (do any platform provides such filter?) Without filter this HW is not really usable, since the physic of resistive touchscreen can provide some bounce effects. With driver internal filter, we have constant amount of retries + debounce retries if some anomaly was detected. High amount of tiny SPI transfers is the primer reason of high CPU load and interrupt frequency. This patch create one SPI transfer with all fields and not optional retires. If bounce anomaly was detected, we will make more transfer if needed. Without this patch, we will get about 10% CPU load on iMX6S on pen-down event. For example by holding stylus on the screen. With this patch, depending in the amount of retries, the CPU load will be 1% with "ti,debounce-rep = <3>". One buffer transfer allows us to use PIO FIFO or DMA engine, depending on the platform. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> Link: https://lore.kernel.org/r/20201110085041.16303-3-o.rempel@pengutronix.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-21tty: convert tty_ldisc_ops 'read()' function to take a kernel pointerLinus Torvalds1-1/+3
The tty line discipline .read() function was passed the final user pointer destination as an argument, which doesn't match the 'write()' function, and makes it very inconvenient to do a splice method for ttys. This is a conversion to use a kernel buffer instead. NOTE! It does this by passing the tty line discipline ->read() function an additional "cookie" to fill in, and an offset into the cookie data. The line discipline can fill in the cookie data with its own private information, and then the reader will repeat the read until either the cookie is cleared or it runs out of data. The only real user of this is N_HDLC, which can use this to handle big packets, even if the kernel buffer is smaller than the whole packet. Cc: Christoph Hellwig <hch@lst.de> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-01-20Input: stmpe-ts - add description for 'prop' struct memberLee Jones1-0/+1
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/stmpe-ts.c:82: warning: Function parameter or member 'prop' not described in 'stmpe_touch' Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210114152323.2382283-6-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-20Input: surface3_spi - remove set but unused variable 'timestamp'Lee Jones1-2/+0
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/surface3_spi.c: In function ‘surface3_spi_process_touch’: drivers/input/touchscreen/surface3_spi.c:97:6: warning: variable ‘timestamp’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Reviewed-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> Link: https://lore.kernel.org/r/20210114152323.2382283-5-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-20Input: usbtouchscreen - actually check return value of usb_submit_urb()Lee Jones1-0/+3
Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/usbtouchscreen.c: In function ‘nexio_read_data’: drivers/input/touchscreen/usbtouchscreen.c:1052:50: warning: variable ‘ret’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210114152323.2382283-4-lee.jones@linaro.org [dtor: log error code as well] Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-20Input: melfas_mip4 - mark a bunch of variables as __always_unusedLee Jones1-4/+4
Dmitry requested to keep these around for the purposes of documentation. Fixes the following W=1 kernel build warning(s): drivers/input/touchscreen/melfas_mip4.c: In function ‘mip4_report_touch’: drivers/input/touchscreen/melfas_mip4.c:474:5: warning: variable ‘size’ set but not used [-Wunused-but-set-variable] drivers/input/touchscreen/melfas_mip4.c:472:5: warning: variable ‘pressure_stage’ set but not used [-Wunused-but-set-variable] drivers/input/touchscreen/melfas_mip4.c:469:7: warning: variable ‘palm’ set but not used [-Wunused-but-set-variable] drivers/input/touchscreen/melfas_mip4.c:468:7: warning: variable ‘hover’ set but not used [-Wunused-but-set-variable] Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210114152323.2382283-3-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-20Input: synaptics - replace NOOP with suitable commentaryLee Jones1-2/+5
Fixes the following W=1 kernel build warning(s): drivers/input/mouse/synaptics.c: In function ‘synaptics_process_packet’: drivers/input/mouse/synaptics.c:1110:6: warning: suggest braces around empty body in an ‘if’ statement [-Wempty-body] Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210114152323.2382283-2-lee.jones@linaro.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-12Input: ariel-pwrbutton - remove unused variable ariel_pwrbutton_id_tableSouptick Joarder1-6/+0
Kernel test robot throws below warning -> >> drivers/input/misc/ariel-pwrbutton.c:152:35: warning: unused variable >> 'ariel_pwrbutton_id_table' [-Wunused-const-variable] static const struct spi_device_id ariel_pwrbutton_id_table[] = { ^ 1 warning generated. Remove unused variable ariel_pwrbutton_id_table[] if no plan to use it further. Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Lubomir Rintel <lkundrak@v3.sk> Link: https://lore.kernel.org/r/1608581041-4354-1-git-send-email-jrdr.linux@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-11Input: omap4-keypad - implement errata check for lost key-up eventsTony Lindgren1-0/+30
We are still missing handling for errata i689 related issues for the case where we never see a key up interrupt for the last pressed key. To fix the issue, we must scan the key state again after the keyboard controller has idled to check if a key up event was missed. This is described in the omap4 silicon errata documentation for Errata ID i689 "1.32 Keyboard Key Up Event Can Be Missed": "When a key is released for a time shorter than the debounce time, in-between 2 key press (KP1 and KP2), the keyboard state machine will go to idle mode and will never detect the key release (after KP1, and also after KP2), and thus will never generate a new IRQ indicating the key release." We can use PM runtime autosuspend features to check the keyboard state after it enters idle. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/X/vrygoBxzGyXhfc@atomide.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-11Input: omap4-keypad - use PM runtime autosuspendTony Lindgren1-11/+39
Implement PM runtime autosuspend support to prepare for adding handling to clear stuck last pressed key in the following patches. The hardware has support for autoidle and can wake up to keypress events. Let's also update omap4_keypad_probe() to use dev instead of &pdev->dev since we already have it from the earlier changes. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/X/vqCs5/EDURprAJ@atomide.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-11Input: omap4-keypad - move rest of key scanning to a separate functionTony Lindgren1-13/+26
Let's move rest of the key scanning code to omap4_keypad_scan_keys(). We will use omap4_keypad_scan_keys() also for implementing errata handling to clear the stuck last key in the following patch. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210110190529.46135-4-tony@atomide.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-11Input: omap4-keypad - scan keys in two phases and simplify with bitmaskTony Lindgren1-28/+45
Because of errata i689 the keyboard can idle with state where no key up interrupts are seen until after the next key press. This means we need to first check for any lost key up events before scanning for new down events. For example, rapidly pressing shift-shift-j can sometimes produce a J instead of j. Let's fix the issue by scanning the keyboard in two phases. First we scan for any key up events that we may have missed, and then we scan for key down events. Let's also simplify things with for_each_set_bit() as suggested by Dmitry Torokhov <dmitry.torokhov@gmail.com>. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210110190529.46135-3-tony@atomide.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-11Input: omap4-keypad - disable unused long interruptsTony Lindgren1-3/+2
We are not using the long events and they produce extra interrupts. Let's not enable them at all. Note that also the v3.0.8 Linux Android kernel has long interrupts disabled. Signed-off-by: Tony Lindgren <tony@atomide.com> Link: https://lore.kernel.org/r/20210110190529.46135-2-tony@atomide.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-11Input: omap4-keypad - switch to use managed resourcesDmitry Torokhov1-84/+53
Now that input core supports devres-managed input devices we can clean up this driver a bit. Link: https://lore.kernel.org/r/X/qfJKiM21uyksYl@google.com Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-10Input: goodix - add support for Goodix GT9286 chipAngeloGioacchino Del Regno1-0/+2
The Goodix GT9286 is a capacitive touch sensor IC based on GT1x. This chip can be found on a number of smartphones, including the F(x)tec Pro 1 and the Elephone U. This has been tested on F(x)Tec Pro1 (MSM8998). Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org> Link: https://lore.kernel.org/r/20210109135512.149032-2-angelogioacchino.delregno@somainline.org Reviewed-by: Bastien Nocera <hadess@hadess.net> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-04Input: ili210x - implement pressure reporting for ILI251xMarek Vasut1-7/+19
The ILI251x seems to report pressure information in the 5th byte of each per-finger touch data element. On the available hardware, this information has the values ranging from 0x0 to 0xa, which is also matching the downstream example code. Report pressure information on the ILI251x. Signed-off-by: Marek Vasut <marex@denx.de> Link: https://lore.kernel.org/r/20201224071238.160098-1-marex@denx.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-04Input: i8042 - unbreak Pegatron C15BAlexey Dobriyan1-0/+2
g++ reports drivers/input/serio/i8042-x86ia64io.h:225:3: error: ‘.matches’ designator used multiple times in the same initializer list C99 semantics is that last duplicated initialiser wins, so DMI entry gets overwritten. Fixes: a48491c65b51 ("Input: i8042 - add ByteSpeed touchpad to noloop table") Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Po-Hsu Lin <po-hsu.lin@canonical.com> Link: https://lore.kernel.org/r/20201228072335.GA27766@localhost.localdomain Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-02Input: st1232 - wait until device is ready before reading resolutionGeert Uytterhoeven1-0/+35
According to the st1232 datasheet, the host has to wait for the device to change into Normal state before accessing registers other than the Status Register. If the reset GPIO is wired, the device is powered on during driver probe, just before reading the resolution. However, the latter may happen before the device is ready, leading to a probe failure: st1232-ts 1-0055: Failed to read resolution: -6 Fix this by waiting until the device is ready, by trying to read the Status Register until it indicates so, or until timeout. On Armadillo 800 EVA, typically the first read fails with an I2C transfer error, while the second read indicates the device is ready. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201229162601.2154566-4-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-02Input: st1232 - do not read more bytes than neededGeert Uytterhoeven1-4/+5
st1232_ts_read_data() already reads ts->read_buf_len bytes (8 or 20 bytes) from the touchscreen controller. This was fine when it was used to read touch point coordinates only, but is overkill for reading the touchscreen resolution, which just needs 3 bytes. Optimize transfers by passing the wanted number of bytes. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201229162601.2154566-3-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2021-01-02Input: st1232 - fix off-by-one error in resolution handlingGeert Uytterhoeven1-2/+2
Before, the maximum coordinates were fixed to (799, 479) or (319, 479), depending on touchscreen controller type. The driver was changed to read the actual values from the touchscreen controller, but did not take into account the returned values are not the maximum coordinates, but the touchscreen resolution (e.g. 800 and 480). Fix this by subtracting 1. Fixes: 3a54a215410b1650 ("Input: st1232 - add support resolution reading") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201229162601.2154566-2-geert+renesas@glider.be Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-18Input: imx_keypad - add dependency on HAS_IOMEMDmitry Torokhov1-1/+1
devm_platform_ioremap_resource() depends on CONFIG_HAS_IOMEM, so let's add it to the dependencies when COMPILE_TEST is enabled. Reported-by: kernel test robot <lkp@intel.com> Fixes: c8834032ffe2 ("Input: imx_keypad - add COMPILE_TEST support") Link: https://lore.kernel.org/r/X9llpA3w1zlZCHXU@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-18Input: da7280 - protect OF match table with CONFIG_OFDmitry Torokhov1-0/+2
The OF match table is only used when OF is enabled. Fixes: cd3f609823a5 ("Input: new da7280 haptic driver") Reported-by: kernel test robot <lkp@intel.com> Acked-by: Roy Im <roy.im.opensource@diasemi.com> Link: https://lore.kernel.org/r/X9xRLVPt9eBi0CT6@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-16Input: raydium_ts_i2c - do not send zero lengthjeffrey.lin1-1/+2
Add default write command package to prevent i2c quirk error of zero data length as Raydium touch firmware update is executed. Signed-off-by: jeffrey.lin <jeffrey.lin@rad-ic.com> Link: https://lore.kernel.org/r/1608031217-7247-1-git-send-email-jeffrey.lin@raydium.corp-partner.google.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-16Input: da7280 - fix missing error testDmitry Torokhov1-0/+1
An "if" testing for error condition has accidentally been dropped from the code. Reported-by: kernel test robot <lkp@intel.com> Fixes: cd3f609823a5 ("Input: new da7280 haptic driver") Reviewed-by: Roy Im <Roy.Im.Opensource@diasemi.com> Link: https://lore.kernel.org/r/X9j8lGFgijzHyYZZ@google.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-16Merge branch 'for-linus' of ↵Linus Torvalds94-2194/+2550
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input updates from Dmitry Torokhov: - support for inhibiting input devices at request from userspace. If a device implements open/close methods, it can also put device into low power state. This is needed, for example, to disable keyboard and touchpad on convertibles when they are transitioned into tablet mode - now that ordinary input devices can be configured for polling mode, dedicated input polling device implementation has been removed - GTCO tablet driver has been removed, as it used problematic custom HID parser, devices are EOL, and there is no interest from the manufacturer - a new driver for Dialog DA7280 haptic chips has been introduced - a new driver for power button on Dell Wyse 3020 - support for eKTF2132 in ektf2127 driver - support for SC2721 and SC2730 in sc27xx-vibra driver - enhancements for Atmel touchscreens, AD7846 touchscreens, Elan touchpads, ADP5589, ST1232 touchscreen, TM2 touchkey drivers - fixes and cleanups to allow clean builds with W=1 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (86 commits) Input: da7280 - fix spelling mistake "sequemce" -> "sequence" Input: cyapa_gen6 - fix out-of-bounds stack access Input: sc27xx - add support for sc2730 and sc2721 dt-bindings: input: Add compatible string for SC2721 and SC2730 dt-bindings: input: Convert sc27xx-vibra.txt to json-schema Input: stmpe - add axis inversion and swapping capability Input: adp5589-keys - do not explicitly control IRQ for wakeup Input: adp5589-keys - do not unconditionally configure as wakeup source Input: ipx4xx-beeper - convert comma to semicolon Input: parkbd - convert comma to semicolon Input: new da7280 haptic driver dt-bindings: input: Add document bindings for DA7280 MAINTAINERS: da7280 updates to the Dialog Semiconductor search terms Input: elantech - fix protocol errors for some trackpoints in SMBus mode Input: elan_i2c - add new trackpoint report type 0x5F Input: elants - document some registers and values Input: atmel_mxt_ts - simplify the return expression of mxt_send_bootloader_cmd() Input: imx_keypad - add COMPILE_TEST support Input: applespi - use new structure for SPI transfer delays Input: synaptics-rmi4 - use new structure for SPI transfer delays ...
2020-12-16Merge tag 'spi-v5.11' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi Pull spi updates from Mark Brown: "The big change this release has been some excellent work from Lukas Wunner which closes a bunch of holes in the cleanup paths for drivers, mainly introduced as a result of devm conversions causing bad interactions with the support SPI has for allocating the bus and driver data together. Together with some of the other work done it feels like we've turned the corner on several long standing pain points with the API. Summary: - Many cleanups around probe/remove and error handling from Lukas Wunner and Uwe Kleine-König, and further fixes around PM from Zhang Qilong. - Provide a mask for which bits of the mode can safely be configured by drivers and use that to fix an issue with the ADS7846 driver. - Documentation of the expected interactions between SPI and GPIO level chip select polarity configuration from H. Nikolaus Schaller, hopefully we're pretty much at the end of sorting out the interactions there. Thanks to Nikolaus, Sven Van Asbroeck and Linus Walleij for this. - DMA support for Allwinner sun6i controllers. - Support for Canaan K210 Designware implementations and Intel Adler Lake" * tag 'spi-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (69 commits) spi: dt-bindings: clarify CS behavior for spi-cs-high and gpio descriptors spi: Limit the spi device max speed to controller's max speed spi: spi-geni-qcom: Use the new method of gpio CS control platform/chrome: cros_ec_spi: Drop bits_per_word assignment platform/chrome: cros_ec_spi: Don't overwrite spi::mode spi: dw: Add support for the Canaan K210 SoC SPI spi: dw: Add support for 32-bits max xfer size dt-bindings: spi: dw-apb-ssi: Add Canaan K210 SPI controller spi: Update DT binding docs to support SiFive FU740 SoC spi: atmel-quadspi: Fix use-after-free on unbind spi: npcm-fiu: Disable clock in probe error path spi: ar934x: Don't leak SPI master in probe error path spi: mt7621: Don't leak SPI master in probe error path spi: mt7621: Disable clock in probe error path media: netup_unidvb: Don't leak SPI master in probe error path spi: sc18is602: Don't leak SPI master in probe error path spi: rb4xx: Don't leak SPI master in probe error path spi: gpio: Don't leak SPI master in probe error path spi: spi-mtk-nor: Don't leak SPI master in probe error path spi: mxic: Don't leak SPI master in probe error path ...
2020-12-15Merge branch 'next' into for-linusDmitry Torokhov111-2347/+2566
Prepare input updates for 5.11 merge window.
2020-12-15Input: da7280 - fix spelling mistake "sequemce" -> "sequence"Colin Ian King1-1/+1
There is a spelling mistake in a dev_err message. Fix it. Signed-off-by: Colin Ian King <colin.king@canonical.com> Link: https://lore.kernel.org/r/20201214223109.82924-1-colin.king@canonical.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-15Input: cyapa_gen6 - fix out-of-bounds stack accessArnd Bergmann1-1/+1
gcc -Warray-bounds warns about a serious bug in cyapa_pip_retrieve_data_structure: drivers/input/mouse/cyapa_gen6.c: In function 'cyapa_pip_retrieve_data_structure.constprop': include/linux/unaligned/access_ok.h:40:17: warning: array subscript -1 is outside array bounds of 'struct retrieve_data_struct_cmd[1]' [-Warray-bounds] 40 | *((__le16 *)p) = cpu_to_le16(val); drivers/input/mouse/cyapa_gen6.c:569:13: note: while referencing 'cmd' 569 | } __packed cmd; | ^~~ Apparently the '-2' was added to the pointer instead of the value, writing garbage into the stack next to this variable. Fixes: c2c06c41f700 ("Input: cyapa - add gen6 device module support") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Link: https://lore.kernel.org/r/20201026161332.3708389-1-arnd@kernel.org Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-12Merge branch 'for-linus' of ↵Linus Torvalds6-40/+159
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input fixes from Dmitry Torokhov: - a fix for cm109 stomping on its own control URB if it tries to toggle buzzer immediately after userspace opens input device (found by syzcaller) - another fix for Raydium touchscreens that do not like splitting command transfers - quirks for i8042, soc_button_array, and goodix drivers to make them work better with certain hardware. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: goodix - add upside-down quirk for Teclast X98 Pro tablet Input: cm109 - do not stomp on control URB Input: i8042 - add Acer laptops to the i8042 reset list Input: cros_ec_keyb - send 'scancodes' in addition to key events Input: soc_button_array - add Lenovo Yoga Tablet2 1051L to the dmi_use_low_level_irq list Input: raydium_ts_i2c - do not split tx transactions
2020-12-12Input: sc27xx - add support for sc2730 and sc2721Nemo Han1-12/+59
Add new compatible strings and match data to support sc2730 and sc2721 which are two varieties of SC27XX family. Signed-off-by: Nemo Han <nemo.han@unisoc.com> Signed-off-by: Chunyan Zhang <chunyan.zhang@unisoc.com> Link: https://lore.kernel.org/r/20201117034949.47877-2-zhang.lyra@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-12Input: stmpe - add axis inversion and swapping capabilityStefan Riedmueller1-2/+5
Make use of generic touchscreen_properties structure to add axis inversion and swapping capabilities. It's configurable via devicetree properties: touchscreen-inverted-x touchscreen-inverted-y touchscreen-swapped-x-y Signed-off-by: Stefan Riedmueller <s.riedmueller@phytec.de> Link: https://lore.kernel.org/r/20200922093903.157232-1-s.riedmueller@phytec.de Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-12Input: goodix - add upside-down quirk for Teclast X98 Pro tabletSimon Beginn1-0/+12
The touchscreen on the Teclast x98 Pro is also mounted upside-down in relation to the display orientation. Signed-off-by: Simon Beginn <linux@simonmicro.de> Signed-off-by: Bastien Nocera <hadess@hadess.net> Link: https://lore.kernel.org/r/20201117004253.27A5A27EFD@localhost Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-12Input: cm109 - do not stomp on control URBDmitry Torokhov1-2/+5
We need to make sure we are not stomping on the control URB that was issued when opening the device when attempting to toggle buzzer. To do that we need to mark it as pending in cm109_open(). Reported-and-tested-by: syzbot+150f793ac5bc18eee150@syzkaller.appspotmail.com Cc: stable@vger.kernel.org Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-12Input: adp5589-keys - do not explicitly control IRQ for wakeupDmitry Torokhov1-18/+9
If device is set up as a wakeup source, I2C core configures the interrupt line as wake IRQ and PM core automatically configures it for waking up the system on system suspend transition, so we do not have to explicitly call enable_irq_wake() and disable_irq_wake() in suspend/resume. Link: https://lore.kernel.org/r/20201120073920.3214492-2-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-12Input: adp5589-keys - do not unconditionally configure as wakeup sourceDmitry Torokhov1-2/+0
We should not be configuring the controller as a wakeup source in the driver, but rather rely on I2C core to mark it as such by either instantiating as I2C_CLIENT_WAKEUP or specifying "wakeup-source" device property. Link: https://lore.kernel.org/r/20201120073920.3214492-1-dmitry.torokhov@gmail.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-12Input: ipx4xx-beeper - convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211085032.2598-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-12Input: parkbd - convert comma to semicolonZheng Yongjun1-1/+1
Replace a comma between expression statements by a semicolon. Signed-off-by: Zheng Yongjun <zhengyongjun3@huawei.com> Link: https://lore.kernel.org/r/20201211084957.2540-1-zhengyongjun3@huawei.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2020-12-11Input: new da7280 haptic driverRoy Im3-0/+1342
Adds support for the Dialog DA7280 LRA/ERM Haptic Driver with multiple mode and integrated waveform memory and wideband support. It communicates via an I2C bus to the device. Signed-off-by: Roy Im <roy.im.opensource@diasemi.com> Reviewed-by: Jes Sorensen <Jes.Sorensen@gmail.com>. Link: https://lore.kernel.org/r/1e293e8c4830b09255af3b7e1721b73afaefdfa3.1606320459.git.Roy.Im@diasemi.com Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-18 23:50:06 +0300