summaryrefslogtreecommitdiff
path: root/drivers/input
AgeCommit message (Collapse)AuthorFilesLines
2012-09-19Input: bcm5974 - Convert to MT-BHenrik Rydberg1-45/+28
Use of the in-kernel tracking code to convert the driver to MT-B. With ten fingers on the pad, the in-kernel tracking adds approximately 25 us to the maximum irqsoff latency. Under normal workloads, however, the tracking has no measurable effect. Tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: bcm5974 - Drop the logical dimensionsHenrik Rydberg1-144/+111
The logical scale is used to produce special finger width values to userspace, but has become an unnecessary restriction for everything else. Also, the bcm5974 trackpads are very accurate and work well without hysteresis. This patch simplifies the driver and device data by removing the logical scale, and by moving the special synaptics code out of the main path. Also add the orientation range, needed in a subsequent patch, to the device configuration. Tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: bcm5974 - Preparatory renamesHenrik Rydberg1-12/+13
Rename touch properties to match established nomenclature, and define the maximum number of fingers. Tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: bcm5974 - only setup button urb for TYPE1 devicesHenrik Rydberg1-17/+26
The early generations with this trackpad used the separate mouse interface to produce button events. With the introduction of the button pads, this information was moved to the trackpad interface, leaving the mouse interface unused. The driver is still setting up both interfaces, which has not caused any problems - until now. It turns out that without the CONFIG_USB_EHCI_TT_NEWSCHED option, the driver may return an ENOSPC upon bt_urb submission, resulting in a failure to open the device. This happens everytime on the MacBookPro Retina (and likely on other mid-2012 models), but earlier MacBook models seem to work fine. This patch skips the bt_urb setup for TYPE2 devices, which arguably should have been done in the first place. Tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: MT - Allow legacy pressure computationHenrik Rydberg1-3/+7
Some drivers like to report ABS_PRESSURE in a special way. Allow this when ABS_MT_PRESSURE is not defined. Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: MT - Get slot by keyHenrik Rydberg1-0/+32
Some devices use an internal key for tracking which cannot be directly mapped to slots. This patch provides a key-to-slot mapping, which can be used by drivers of such devices. Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: MT - Add in-kernel trackingHenrik Rydberg1-2/+142
With the INPUT_MT_TRACK flag set, the function input_mt_assign_slots() can be used to match a new set of contacts against the currently used slots. The algorithm used is based on Lagrange relaxation, and performs very well in practice; slower than mtdev for a few corner cases, but faster in most commonly occuring cases. Tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: MT - Handle frame synchronization in coreHenrik Rydberg1-2/+68
Most MT drivers perform the same actions on frame synchronization. Some actions, like dropping unseen contacts, are also unnecessarily complex. Collect common frame synchronization tasks in a new function, input_mt_sync_frame(). Depending on the flags set, it drops unseen contacts and performs pointer emulation. With init flags and frame synchronization in place, most MT drivers can be simplified. First out are the bcm5974 and hid-multitouch drivers, following this patch. Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: MT - Add flags to input_mt_init_slots()Henrik Rydberg15-19/+21
Preparing to move more repeated code into the mt core, add a flags argument to the input_mt_slots_init() function. Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: evdev - Add the events() callbackHenrik Rydberg1-21/+47
By sending a full frame of events at the same time, the irqsoff latency at heavy load is brought down from 200 us to 100 us. Cc: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: Send events one packet at a timeHenrik Rydberg1-53/+123
On heavy event loads, such as a multitouch driver, the irqsoff latency can be as high as 250 us. By accumulating a frame worth of data before passing it on, the latency can be dramatically reduced. As a side effect, the special EV_SYN handling can be removed, since the frame is now atomic. This patch adds the events() handler callback and uses it if it exists. The latency is improved by 50 us even without the callback. Cc: Daniel Kurtz <djkurtz@chromium.org> Tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Tested-by: Sedat Dilek <sedat.dilek@gmail.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: Move autorepeat to the event-passing phaseHenrik Rydberg1-21/+25
Preparing to split event filtering and event passing, move the autorepeat function to the point where the event is actually passed. Tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: Make sure we follow all EV_KEY eventsHenrik Rydberg1-7/+13
For some EV_KEY types, sending a larger-than-one value causes the input state to oscillate. This patch makes sure this cannot happen, clearing up the autorepeat bypass logic in the process. Tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: Improve the events-per-packet estimateHenrik Rydberg2-4/+7
The events-per-packet estimate has so far been used by MT devices only. This patch adjusts the packet buffer size to also accomodate the KEY and MSC events. Keyboards normally send one or two keys at a time. MT devices normally send a number of button keys along with the MT information. The buffer size chosen here covers those cases, and matches the default buffer size in evdev. Since the input estimate is now preferred, remove the special input-mt estimate. Reviewed-and-tested-by: Ping Cheng <pingc@wacom.com> Tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Input: Break out MT dataHenrik Rydberg3-35/+43
Move all MT-related things to a separate place. This saves some bytes for non-mt input devices, and prepares for new MT features. Reviewed-and-tested-by: Benjamin Tissoires <benjamin.tissoires@enac.fr> Tested-by: Ping Cheng <pingc@wacom.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Henrik Rydberg <rydberg@euromail.se>
2012-09-19Revert "input: ab8500-ponkey: Create AB8500 domain IRQ mapping"Dmitry Torokhov1-2/+2
This reverts commit ca3b3faf9bee4dc5df4f10eae2d1e48f7de0a8ad. There was a plan to place ab8500_irq_get_virq() calls in each AB8500 child device prior to requesting an IRQ, but as we're no longer using Device Tree to collect our IRQ numbers, it's actually better to allow the core to do this during device registration time. So the IRQ number we pull from its resource has already been converted to a virtual IRQ. Signed-off-by: Lee Jones <lee.jones@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-19Merge tag 'v3.6-rc5' into for-linusDmitry Torokhov10-15/+200
Sync with mainline so that I can revert an input patch that came in through another subsystem tree.
2012-09-19ARM: spear: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the spear include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Viresh Kumar <viresh.linux@gmail.com> Cc: Shiraz Hashim <shiraz.hashim@st.com> Cc: spear-devel@list.st.com Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-19ARM: samsung: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the samsung include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Cc: Kukjin Kim <kgene.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Bryan Wu <bryan.wu@canonical.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Sylwester Nawrocki <s.nawrocki@samsung.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Felipe Balbi <balbi@ti.com> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Sangbeom Kim <sbkim73@samsung.com> Cc: Liam Girdwood <lrg@ti.com> Cc: linux-samsung-soc@vger.kernel.org
2012-09-19ARM: omap: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the omap include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Tony Lindgren <tony@atomide.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Benoît Cousson" <b-cousson@ti.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Ohad Ben-Cohen <ohad@wizery.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Omar Ramirez Luna <omar.ramirez@ti.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Peter Ujfalusi <peter.ujfalusi@ti.com> Cc: Jarkko Nikula <jarkko.nikula@bitmer.com> Cc: Liam Girdwood <lrg@ti.com> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: Jean Pihet <j-pihet@ti.com> Cc: J Keerthy <j-keerthy@ti.com> Cc: linux-omap@vger.kernel.org
2012-09-19input: rpcmouse: use __iomem pointers for MMIOArnd Bergmann1-1/+1
ARM is moving to stricter checks on readl/write functions, so we need to use the correct types everywhere. Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2012-09-18input: twl4030-vibra: Support for DT booted kernelPeter Ujfalusi1-2/+16
Add support when the kernel has been booted with DT blob. In this case the pdata is NULL, we need to reach up to the core node and check if the codec part has been enabled to determine if we need to coexist with the codec or not. Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2012-09-14ARM: nomadik: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the nomadik include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Felipe Balbi <balbi@ti.com> Acked-by: Alessandro Rubini <rubini@unipv.it> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: STEricsson <STEricsson_nomadik_linux@list.st.com> Cc: Srinidhi Kasagar <srinidhi.kasagar@stericsson.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "David S. Miller" <davem@davemloft.net> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Andreas Westin <andreas.westin@stericsson.com>
2012-09-14ARM: w90x900: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the w90x900 include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Cc: Wan ZongShun <mcuos.com@gmail.com> Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org> Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-09-14ARM: pxa: move platform_data definitionsArnd Bergmann3-3/+3
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the pxa include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Igor Grinberg <grinberg@compulab.co.il> Acked-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: Marek Vasut <marex@denx.de> Acked-by: Robert Jarzmik <robert.jarzmik@free.fr> Acked-by: Paul Parsons <lost.distance@yahoo.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Acked-By: Stefan Schmidt <stefan@openezx.org> Cc: Eric Miao <eric.y.miao@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@gmail.com> Cc: Daniel Ribeiro <drwyrm@gmail.com> Cc: Harald Welte <laforge@openezx.org> Cc: Philipp Zabel <philipp.zabel@gmail.com> Cc: Tomas Cech <sleep_walker@suse.cz> Cc: Sergey Lapin <slapin@ossfans.org> Cc: Jonathan Cameron <jic23@cam.ac.uk> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Samuel Ortiz <samuel@sortiz.org> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Cc: openezx-devel@lists.openezx.org
2012-09-14ARM: ep93xx: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the ep93xx include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Hartley Sweeten <hsweeten@visionengravers.com> Acked-by: Ryan Mallon <rmallon@gmail.com> Acked-by: Vinod Koul <vinod.koul@linux.intel.com> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Dan Williams <djbw@fb.com> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de> Cc: Liam Girdwood <lrg@ti.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.de> Cc: Mika Westerberg <mika.westerberg@iki.fi> Cc: Axel Lin <axel.lin@gmail.com>
2012-09-14ARM: davinci: move platform_data definitionsArnd Bergmann1-1/+1
Platform data for device drivers should be defined in include/linux/platform_data/*.h, not in the architecture and platform specific directories. This moves such data out of the davinci include directories Signed-off-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Nicolas Pitre <nico@linaro.org> Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com> Acked-by: Felipe Balbi <balbi@ti.com> Cc: Sekhar Nori <nsekhar@ti.com> Cc: Kevin Hilman <khilman@ti.com> Cc: "Ben Dooks" <ben-linux@fluff.org> Cc: "Wolfram Sang" <w.sang@pengutronix.de> Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: Chris Ball <cjb@laptop.org> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Liam Girdwood <lrg@ti.com> Cc: davinci-linux-open-source@linux.davincidsp.com
2012-09-13Input: hgpk - use %*ph to dump small bufferAndy Shevchenko1-6/+3
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-13Input: gpio_keys_polled - fix dt pdata->nbuttonsAlexandre Pereira da Silva1-0/+1
pdata->nbuttons should be updated by the dt code. Signed-off-by: Alexandre Pereira da Silva <aletes.xgr@gmail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-09-13Input: omap-keypad: Remove dependencies to mach includesTony Lindgren2-121/+35
Remove support for omap2+ as it's no longer needed since it's using matrix-keypad. This way we can remove depency to plat and mach headers which is needed for ARM common zImage support. Also remove INT_KEYBOARD by using omap_kp->irq. Note that this patch depends on an earlier patch "ARM: OMAP: Move gpio.h to include/linux/platform_data". Cc: Dmitry Torokhov <dmitry.torokhov@gmail.com> Cc: linux-input@vger.kernel.org Acked-by: Sourav Poddar <sourav.poddar@ti.com> Reviewed-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2012-09-09Merge branch 'for-linus' of ↵Linus Torvalds4-2/+23
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input Pull input subsystem updates from Dmitry Torokhov. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: wacom - add support for EMR on Cintiq 24HD touch Input: i8042 - add Gigabyte T1005 series netbooks to noloop table Input: imx_keypad - reset the hardware before enabling Input: edt-ft5x06 - fix build error when compiling wthout CONFIG_DEBUG_FS
2012-09-05Input: omap-keypad - fixed formattingJosh1-4/+4
Fixed spacing error on if statements and fixed tab error. Signed-off-by: Josh <joshua.taylor0@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-05Merge tag 'v3.6-rc4' into nextDmitry Torokhov12-16/+225
Linux 3.6-rc4 # gpg: Signature made Sat 01 Sep 2012 10:40:33 AM PDT using RSA key ID 00411886 # gpg: Good signature from "Linus Torvalds <torvalds@linux-foundation.org>"
2012-09-05Input: tegra - move platform data headerStephen Warren1-1/+1
Move the Tegra KBC platform data header out of arch/arm/mach-tegra, as a pre-requisite of single zImage. Signed-off-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-05Input: imx_keypad - fix missing clk conversionsFabio Estevam1-2/+2
commit a1e636e6d3 (Input: imx_keypad - use clk_prepare_enable/ clk_disable_unprepare()) missed to update clk_enable/clk_disable in imx_keypad_probe(). Fix it so that we do not get clk warnings at boot. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-05Input: usbtouchscreen - initialize eGalax devicesForest Bond1-0/+40
Certain eGalax devices expose an interface with class HID and protocol None. Some work with usbhid and some work with usbtouchscreen, but there is no easy way to differentiate. Sending an eGalax diagnostic packet seems to kick them all into using the right protocol for usbtouchscreen, so we can continue to bind them all there (as opposed to handing some off to usbhid). This fixes a regression for devices that were claimed by (and worked with) usbhid prior to commit 139ebe8dc80dd74cb2ac9f5603d18fbf5cff049f ("Input: usbtouchscreen - fix eGalax HID ignoring"), which made usbtouchscreen claim them instead. With this patch they will still be claimed by usbtouchscreen, but they will actually report events usbtouchscreen can understand. Note that these devices will be limited to the usbtouchscreen feature set so e.g. dual touch features are not supported. I have the distinct pleasure of needing to support devices of both types and have tested accordingly. Signed-off-by: Forest Bond <forest.bond@rapidrollout.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-09-05Input: wacom - add support for EMR on Cintiq 24HD touchJason Gerecke1-1/+5
Adds support for the EMR digitizer on the Cintiq 24HD touch. The EMR digitizer should work identically to that found on the Cintiq 24HD. The touch digitizer is a separate USB device similar to how we split apart some other devices. Signed-off-by: Jason Gerecke <killertofu@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-08-31Input: s3c2410_ts - make s3c_ts_pmops constSachin Kamat1-1/+1
Fixes the following warning: WARNING: struct dev_pm_ops should normally be const Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-08-22Input: samsung-keypad - use of_get_child_count() helperTobias Klauser1-4/+2
Use of_get_child_count() instead of custom implementation. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-08-22Input: samsung-keypad - use of_match_ptr()Tobias Klauser1-3/+1
Instead of having to define the match table to NULL if CONFIG_OF isn't set, use the of_match_ptr() macro which will do this for us. Signed-off-by: Tobias Klauser <tklauser@distanz.ch> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-08-22Input: uinput - fix formattingDmitry Torokhov1-10/+18
Reformat the code to keep it within 80 columns. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-08-22Input: uinput - specify exact bit sizes on userspace APIsDmitry Torokhov1-5/+6
Switch to using __u32/__s32 instead of ordinary 'int' in structures forming userspace API. Also internally make request_id unsigned int. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-08-22Input: uinput - mark failed submission requests as freeDmitry Torokhov1-38/+40
If uinput_request_submit() fails after new request ID was allocated we need to mark that request ID as free, otherwise it will always stay occupied and we may run out of available IDs. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-08-22Input: uinput - fix race that can block nonblocking readDmitry Torokhov1-30/+44
Consider two threads calling read() on the same uinput-fd, both non-blocking. Assume there is data-available so both will simultaneously pass: udev->head == udev->tail Then the first thread goes to sleep and the second one pops the message from the queue. Now assume udev->head == udev->tail. If the first thread wakes up it will call wait_event_*() and sleep in the waitq. This effectively turns the non-blocking FD into a blocking one. We fix this by attempting to fetch events from the queue first and only if we fail to retrieve any events we either return -EAGAIN (in case of non-blocing read) or wait until there are more events. This also fixes incorrect return code (we were returning 0 instead of -EAGAIN for non-blocking reads) when an event is "stolen" by another thread. Blocking reads will now continue to wait instead of returning 0 in this scenario. Count of 0 continues to be a special case, as per spec: we will check for device existence and whether there are events in the queue, but no events will be actually retrieved. Reported-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-08-22Input: uinput - return -EINVAL when read buffer size is too smallDavid Herrmann1-0/+3
Let's check whether the user-supplied buffer is actually big enough and return -EINVAL if it is not. This differs from current behavior, which caused 0 to be returned and actually does not make any sense, as broken application will simply repeat the read getting into endless loop. Note that we treat 0 as a special case, according to the standard: "Before any action described below is taken, and if nbyte is zero, the read() function may detect and return errors as described below. In the absence of errors, or if error detection is not performed, the read() function shall return zero and have no other results." Signed-off-by: David Herrmann <dh.herrmann@googlemail.com> Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-08-22Input: uinput - take event lock when fetching events from bufferDmitry Torokhov1-3/+24
When fetching events form device's buffer in uinput_read() we need to take input device's event_lock to avoid racing with new event delivery. Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
2012-08-22Input: get rid of MATCH_BIT() macroDmitry Torokhov1-17/+26
MATCH_BIT() is ugly and stupid, we have much nicer bitmap_subset() which does the same and does not hide control flow. Reported-by: Baodong Chen <chenbdchenbd@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-08-22Input: rotary-encoder - add DT bindingsDaniel Mack1-16/+80
This adds devicetree bindings to the rotary encoder driver and some documentation about how to use them. Tested on a PXA3xx platform. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-08-22Input: rotary-encoder - constify platform data pointersDmitry Torokhov1-6/+6
Drivers should not be changing platform data attached to the device because they do not own it. Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
2012-08-22Input: rotary-encoder - use gpio_request_one()Daniel Mack1-25/+8
Use gpio_request_one() instead of separate calls to gpio_request() and gpio_direction_input() to simplify the code. Signed-off-by: Daniel Mack <zonque@gmail.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-23 17:23:14 +0300