summaryrefslogtreecommitdiff
path: root/drivers/infiniband/ulp
AgeCommit message (Collapse)AuthorFilesLines
2011-08-17Merge branches 'ipoib' and 'iser' into for-nextRoland Dreier3-5/+9
2011-08-17IB/iser: Support iSCSI PDU paddingOr Gerlitz2-4/+8
RFC3270 mandates that iSCSI PDUs are padded to the closest integer number of four byte words. Fix the iser code to support that on both the TX/RX flows. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-08-17IBiser: Fix wrong mask when sizeof (dma_addr_t) > sizeof (unsigned long)Or Gerlitz1-1/+1
The code that prepares the SG associated with SCSI command for FMR was buggy for systems with DMA addresses that don't fit in unsigned long, e.g under the 32-bit based XenServer dom0 sizeof(dma_addr_t) is 8. Fix that by casting to unsigned long long a masking constant used by the code. This resolves a crash in iser_sg_to_page_vec on this system. Signed-off-by: Or Gerlitz <ogerlitz@mellanox.co.il> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-08-16IPoIB: Fix possible NULL dereference in ipoib_start_xmit()Bernd Schubert1-3/+5
Fix a bug introduced in 69cce1d14049 ("net: Abstract dst->neighbour accesses behind helpers.") where we might dereference skb_dst(skb) even if it is NULL, which causes: [ 240.944030] BUG: unable to handle kernel NULL pointer dereference at 0000000000000040 [ 240.948007] IP: [<ffffffffa0366ce9>] ipoib_start_xmit+0x39/0x280 [ib_ipoib] [...] [ 240.948007] Call Trace: [ 240.948007] <IRQ> [ 240.948007] [<ffffffff812cd5e0>] dev_hard_start_xmit+0x2a0/0x590 [ 240.948007] [<ffffffff8131f680>] ? arp_create+0x70/0x200 [ 240.948007] [<ffffffff812e8e1f>] sch_direct_xmit+0xef/0x1c0 Addresses: https://bugzilla.kernel.org/show_bug.cgi?id=41212 Signed-off-by: Bernd Schubert <bernd.schubert@itwm.fraunhofer.de> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-07-28Merge branch 'for-next' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target: Convert to DIV_ROUND_UP_SECTOR_T usage for sectors / dev_max_sectors kernel.h: Add DIV_ROUND_UP_ULL and DIV_ROUND_UP_SECTOR_T macro usage iscsi-target: Add iSCSI fabric support for target v4.1 iscsi: Add Serial Number Arithmetic LT and GT into iscsi_proto.h iscsi: Use struct scsi_lun in iscsi structs instead of u8[8] iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsi
2011-07-27atomic: use <linux/atomic.h>Arun Sharma2-2/+2
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-25iscsi: Resolve iscsi_proto.h naming conflicts with drivers/target/iscsiNicholas Bellinger1-1/+1
This patch renames the following iscsi_proto.h structures to avoid namespace issues with drivers/target/iscsi/iscsi_target_core.h: *) struct iscsi_cmd -> struct iscsi_scsi_req *) struct iscsi_cmd_rsp -> struct iscsi_scsi_rsp *) struct iscsi_login -> struct iscsi_login_req This patch includes useful ISCSI_FLAG_LOGIN_[CURRENT,NEXT]_STAGE*, and ISCSI_FLAG_SNACK_TYPE_* definitions used by iscsi_target_mod, and fixes the incorrect definition of struct iscsi_snack to following RFC-3720 Section 10.16. SNACK Request. Also, this patch updates libiscsi, iSER, be2iscsi, and bn2xi to use the updated structure definitions in a handful of locations. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: Nicholas A. Bellinger <nab@linux-iscsi.org>
2011-07-23Merge branch 'for-linus' of ↵Linus Torvalds1-0/+2
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (26 commits) IB/qib: Defer HCA error events to tasklet mlx4_core: Bump the driver version to 1.0 RDMA/cxgb4: Use printk_ratelimited() instead of printk_ratelimit() IB/mlx4: Support PMA counters for IBoE IB/mlx4: Use flow counters on IBoE ports IB/pma: Add include file for IBA performance counters definitions mlx4_core: Add network flow counters mlx4_core: Fix location of counter index in QP context struct mlx4_core: Read extended capabilities into the flags field mlx4_core: Extend capability flags to 64 bits IB/mlx4: Generate GID change events in IBoE code IB/core: Add GID change event RDMA/cma: Don't allow IPoIB port space for IBoE RDMA: Allow for NULL .modify_device() and .modify_port() methods IB/qib: Update active link width IB/qib: Fix potential deadlock with link down interrupt IB/qib: Add sysfs interface to read free contexts IB/mthca: Remove unnecessary read of PCI_CAP_ID_EXP IB/qib: Remove double define IB/qib: Remove unnecessary read of PCI_CAP_ID_EXP ...
2011-07-18net: Abstract dst->neighbour accesses behind helpers.David S. Miller2-21/+40
dst_{get,set}_neighbour() Signed-off-by: David S. Miller <davem@davemloft.net>
2011-07-13IB/srp: Avoid duplicate devices from LUN scanBart Van Assche1-0/+2
SCSI scanning of a channel:id:lun triplet in Linux works as follows (function scsi_scan_target() in drivers/scsi/scsi_scan.c): - If lun == SCAN_WILD_CARD, send a REPORT LUNS command to the target and process the result. - If lun != SCAN_WILD_CARD, send an INQUIRY command to the LUN corresponding to the specified channel:id:lun triplet to verify whether the LUN exists. So a SCSI driver must either take the channel and target id values in account in its quecommand() function or it should declare that it only supports one channel and one target id. Currently the ib_srp driver does neither. As a result scanning the SCSI bus via e.g. rescan-scsi-bus.sh causes many duplicate SCSI devices to be created. For each 0:0:L device, several duplicates are created with the same LUN number and with (C:I) != (0:0). Fix this by declaring that the ib_srp driver only supports one channel and one target id. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Cc: <stable@kernel.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-06-07net: remove interrupt.h inclusion from netdevice.hAlexey Dobriyan1-0/+1
* remove interrupt.g inclusion from netdevice.h -- not needed * fixup fallout, add interrupt.h and hardirq.h back where needed. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-05-26Merge branch 'for-linus' of ↵Linus Torvalds2-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: RDMA/cma: Save PID of ID's owner RDMA/cma: Add support for netlink statistics export RDMA/cma: Pass QP type into rdma_create_id() RDMA: Update exported headers list RDMA/cma: Export enum cma_state in <rdma/rdma_cm.h> RDMA/nes: Add a check for strict_strtoul() RDMA/cxgb3: Don't post zero-byte read if endpoint is going away RDMA/cxgb4: Use completion objects for event blocking IB/srp: Fix integer -> pointer cast warnings IB: Add devnode methods to cm_class and umad_class IB/mad: Return EPROTONOSUPPORT when an RDMA device lacks the QP required IB/uverbs: Add devnode method to set path/mode RDMA/ucma: Add .nodename/.mode to tell userspace where to create device node RDMA: Add netlink infrastructure RDMA: Add error handling to ib_core_init()
2011-05-26Merge branches 'cma', 'cxgb3', 'cxgb4', 'misc', 'nes', 'netlink', 'srp' and ↵Roland Dreier2-3/+3
'uverbs' into for-next
2011-05-26RDMA/cma: Pass QP type into rdma_create_id()Sean Hefty1-1/+1
The RDMA CM currently infers the QP type from the port space selected by the user. In the future (eg with RDMA_PS_IB or XRC), there may not be a 1-1 correspondence between port space and QP type. For netlink export of RDMA CM state, we want to export the QP type to userspace, so it is cleaner to explicitly associate a QP type to an ID. Modify rdma_create_id() to allow the user to specify the QP type, and use it to make our selections of datagram versus connected mode. Signed-off-by: Sean Hefty <sean.hefty@intel.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2011-05-23IB/srp: Fix integer -> pointer cast warningsRoland Dreier1-2/+2
Fix drivers/infiniband/ulp/srp/ib_srp.c: In function 'srp_handle_recv': drivers/infiniband/ulp/srp/ib_srp.c:1150: warning: cast to pointer from integer of different size drivers/infiniband/ulp/srp/ib_srp.c: In function 'srp_send_completion': drivers/infiniband/ulp/srp/ib_srp.c:1234: warning: cast to pointer from integer of different size by adding an intermediate cast to uintptr_t. Signed-off-by: Roland Dreier <roland@purestorage.com> Acked-by: David Dillow <dillowda@ornl.gov>
2011-04-20net: infiniband/ulp/ipoib: convert to hw_featuresMichał Mirosław5-46/+20
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-31Fix common misspellingsLucas De Marchi1-1/+1
Fixes generated by 'codespell' and manually reviewed. Signed-off-by: Lucas De Marchi <lucas.demarchi@profusion.mobi>
2011-03-24Merge branch 'for-linus' of ↵Linus Torvalds2-249/+514
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB: Increase DMA max_segment_size on Mellanox hardware IB/mad: Improve an error message so error code is included RDMA/nes: Don't print success message at level KERN_ERR RDMA/addr: Fix return of uninitialized ret value IB/srp: try to use larger FMR sizes to cover our mappings IB/srp: add support for indirect tables that don't fit in SRP_CMD IB/srp: rework mapping engine to use multiple FMR entries IB/srp: allow sg_tablesize to be set for each target IB/srp: move IB CM setup completion into its own function IB/srp: always avoid non-zero offsets into an FMR
2011-03-16IB/srp: try to use larger FMR sizes to cover our mappingsDavid Dillow2-13/+21
Now that we can get larger SG lists, we can take advantage of HCAs that allow us to use larger FMR sizes. In many cases, we can use up to 512 entries, so start there and work our way down. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-16IB/srp: add support for indirect tables that don't fit in SRP_CMDDavid Dillow2-12/+110
This allows us to guarantee the ability to submit up to 8 MB requests based on the current value of SCSI_MAX_SG_CHAIN_SEGMENTS. While FMR will usually condense the requests into 8 SG entries, it is imperative that the target support external tables in case the FMR mapping fails or is not supported. We add a safety valve to allow targets without the needed support to reap the benefits of the large tables, but fail in a manner that lets the user know that the data didn't make it to the device. The user must add "allow_ext_sg=1" to the target parameters to indicate that the target has the needed support. If indirect_sg_entries is not specified in the modules options, then the sg_tablesize for the target will default to cmd_sg_entries unless overridden by the target options. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-16IB/srp: rework mapping engine to use multiple FMR entriesDavid Dillow2-129/+266
Instead of forcing all of the S/G entries to fit in one FMR, and falling back to indirect descriptors if that fails, allow the use of as many FMRs as needed to map the request. This lays the groundwork for allowing indirect descriptor tables that are larger than can fit in the command IU, but should marginally improve performance now by reducing the number of indirect descriptors needed. We increase the minimum page size for the FMR pool to 4K, as larger pages help increase the coverage of each FMR, and it is rare that the kernel would send down a request with scattered 512 byte fragments. This patch also move some of the target initialization code afte the parsing of options, to keep it together with the new code that needs to allocate memory based on the options given. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-16IB/srp: allow sg_tablesize to be set for each targetDavid Dillow2-24/+59
Different configurations of target software allow differing max sizes of the command IU. Allowing this to be changed per-target allows all targets on an initiator to get an optimal setting. We deprecate srp_sg_tablesize and replace it with cmd_sg_entries in preparation for allowing more indirect descriptors than can fit in the IU. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-16IB/srp: move IB CM setup completion into its own functionDavid Dillow1-71/+73
This is to clean up prior to further changes. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-03-16IB/srp: always avoid non-zero offsets into an FMRDavid Dillow1-16/+1
It is unclear exactly how this code works around Mellanox SRP targets, or if the problem is on the target side or in the HCA itself. In an abundance of caution, we should always enable the workaround. Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-02-24[SCSI] iser: export addr and portMike Christie1-0/+26
This pactch has iser export the address and port of the endpoint. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@suse.de>
2011-01-21kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes1-1/+1
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-17Merge branches 'misc', 'mlx4', 'mthca', 'nes' and 'srp' into for-nextRoland Dreier1-8/+7
2011-01-17RDMA: Update workqueue usageTejun Heo1-2/+2
* ib_wq is added, which is used as the common workqueue for infiniband instead of the system workqueue. All system workqueue usages including flush_scheduled_work() callers are converted to use and flush ib_wq. * cancel_delayed_work() + flush_scheduled_work() converted to cancel_delayed_work_sync(). * qib_wq is removed and ib_wq is used instead. This is to prepare for deprecation of flush_scheduled_work(). Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-14IB/srp: Test only once whether iu allocation succeededBart Van Assche1-8/+7
Merge the two tests in srp_queuecommand() of whether information unit allocation succeeded into one. An intended side effect of this change is that we fix the warning: drivers/infiniband/ulp/srp/ib_srp.c: In function 'srp_queuecommand': drivers/infiniband/ulp/srp/ib_srp.c:1116: warning: 'req' may be used uninitialized in this function (seen with CONFIG_CC_OPTIMIZE_FOR_SIZE=y at least with gcc 4.4.4) Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-12RDMA: Use vzalloc() to replace vmalloc()+memset(0)Joe Perches2-9/+4
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11Merge branches 'cxgb4', 'ipath', 'ipoib', 'mlx4', 'mthca', 'nes', 'qib' and ↵Roland Dreier8-363/+210
'srp' into for-next
2011-01-11IPoIB: Add GRO supportOr Gerlitz3-1/+4
Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-11IPoIB: Remove LRO supportOr Gerlitz5-132/+2
As a first step in moving from LRO to GRO, revert commit af40da894e9 ("IPoIB: add LRO support"). Also eliminate the ethtool set_flags callback which isn't needed anymore. Finally, we need to include <linux/sched.h> directly to get the declaration of restart_syscall() (which used to be included implicitly through <linux/inet_lro.h>). Cc: Ben Hutchings <bhutchings@solarflare.com> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Vladimir Sokolovsky <vlad@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@voltaire.com> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2011-01-10IB/srp: consolidate hot-path variables into cache linesDavid Dillow2-17/+26
Put the variables accessed together in the hot-path into common cachelines, and separate them by RW vs RO to avoid false dirtying. We keep a local copy of the lkey and rkey in the target to avoid traversing pointers (and associated cache lines) to find them. Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10IB/srp: stop sharing the host lock with SCSIBart Van Assche2-23/+25
We don't need protection against the SCSI stack, so use our own lock to allow parallel progress on separate CPUs. Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ broken out and small cleanups by David Dillow ] Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10IB/srp: reduce lock coverage of command completionBart Van Assche1-23/+14
We only need the lock to cover list and credit manipulations, so push those into srp_remove_req() and update the call chains. We reorder the request removal and command completion in srp_process_rsp() to avoid the SCSI mid-layer sending another command before we've released our request and added any credits returned by the target. This prevents us from returning HOST_BUSY unneccesarily. Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ broken out, small cleanups, and modified to avoid potential extraneous HOST_BUSY returns by David Dillow ] Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10IB/srp: reduce local coverage for command submission and EHBart Van Assche2-58/+67
We only need locks to protect our lists and number of credits available. By pre-consuming the credit for the request, we can reduce our lock coverage to just those areas. If we don't actually send the request, we'll need to put the credit back into the pool. Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ broken out and small cleanups by David Dillow ] Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-10IB/srp: don't move active requests to their own listBart Van Assche2-11/+13
We use req->scmnd != NULL to indicate an active request, so there's no need to keep a separate list for them. We can afford the array iteration during error handling, and dropping it gives us one less item that needs lock protection. Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ broken out and small cleanups by David Dillow ] Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-05IB/srp: allow lockless work postingBart Van Assche2-44/+28
Only one CPU at a time will own an RX IU, so using the address of the IU as the work request cookie allows us to avoid taking a lock. We can similarly prepare the TX path for lockless posting by moving the free TX IUs to a list. This also removes the requirement that the queue sizes be a power of 2. Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ broken out, small cleanups, and modified to avoid needing an extra field in the IU by David Dillow] Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-05IB/srp: consolidate state change codeBart Van Assche1-21/+24
Signed-off-by: Bart Van Assche <bvanassche@acm.org> [ broken out and small cleanups by David Dillow ] Signed-off-by: David Dillow <dillowda@ornl.gov>
2011-01-05IB/srp: allow task management without a previous requestDavid Dillow2-63/+37
We can only have one task management comment outstanding, so move the completion and status to the target port. This allows us to handle resets of a LUN without a corresponding request having been sent. Meanwhile, we don't need to play games with host_scribble, just use it as the pointer it is. This fixes a crash when we issue a bus reset using sg_reset. Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=13893 Reported-by: Bart Van Assche <bvanassche@acm.org> Reviewed-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Dillow <dillowda@ornl.gov>
2010-11-17SCSI host lock push-downJeff Garzik1-1/+3
Move the mid-layer's ->queuecommand() invocation from being locked with the host lock to being unlocked to facilitate speeding up the critical path for drivers who don't need this lock taken anyway. The patch below presents a simple SCSI host lock push-down as an equivalent transformation. No locking or other behavior should change with this patch. All existing bugs and locking orders are preserved. Additionally, add one parameter to queuecommand, struct Scsi_Host * and remove one parameter from queuecommand, void (*done)(struct scsi_cmnd *) Scsi_Host* is a convenient pointer that most host drivers need anyway, and 'done' is redundant to struct scsi_cmnd->scsi_done. Minimal code disturbance was attempted with this change. Most drivers needed only two one-line modifications for their host lock push-down. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Acked-by: James Bottomley <James.Bottomley@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27Merge branch 'for-linus' of ↵Linus Torvalds4-77/+197
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (63 commits) IB/qib: clean up properly if pci_set_consistent_dma_mask() fails IB/qib: Allow driver to load if PCIe AER fails IB/qib: Fix uninitialized pointer if CONFIG_PCI_MSI not set IB/qib: Fix extra log level in qib_early_err() RDMA/cxgb4: Remove unnecessary KERN_<level> use RDMA/cxgb3: Remove unnecessary KERN_<level> use IB/core: Add link layer type information to sysfs IB/mlx4: Add VLAN support for IBoE IB/core: Add VLAN support for IBoE IB/mlx4: Add support for IBoE mlx4_en: Change multicast promiscuous mode to support IBoE mlx4_core: Update data structures and constants for IBoE mlx4_core: Allow protocol drivers to find corresponding interfaces IB/uverbs: Return link layer type to userspace for query port operation IB/srp: Sync buffer before posting send IB/srp: Use list_first_entry() IB/srp: Reduce number of BUSY conditions IB/srp: Eliminate two forward declarations IB/mlx4: Signal node desc changes to SM by using FW to generate trap 144 IB: Replace EXTRA_CFLAGS with ccflags-y ...
2010-10-27replace nested max/min macros with {max,min}3 macroHagen Paul Pfeifer1-2/+1
Use the new {max,min}3 macros to save some cycles and bytes on the stack. This patch substitutes trivial nested macros with their counterpart. Signed-off-by: Hagen Paul Pfeifer <hagen@jauu.net> Cc: Joe Perches <joe@perches.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Hartley Sweeten <hsweeten@visionengravers.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: Roland Dreier <rolandd@cisco.com> Cc: Sean Hefty <sean.hefty@intel.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2010-10-27Merge branches 'amso1100', 'cma', 'cxgb3', 'cxgb4', 'ehca', 'iboe', 'ipoib', ↵Roland Dreier4-77/+197
'misc', 'mlx4', 'nes', 'qib' and 'srp' into for-next
2010-10-25IB/srp: Sync buffer before posting sendDavid Dillow1-0/+5
srp_send_tsk_mgmt() was missing the proper DMA sync calls before posting the buffer to the device. Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25IB/srp: Use list_first_entry()Bart Van Assche1-1/+1
Use the list_first_entry() macro in ib_srp instead of open-coding the equivalent, which makes the source code slightly more descriptive. The list_first_entry() macro itself was introduced in kernel 2.6.22. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25IB/srp: Reduce number of BUSY conditionsBart Van Assche1-2/+7
As proposed by the SRP (draft) standard, ib_srp reserves one ring element for SRP_TSK_MGMT requests. This patch makes sure that the SCSI mid-layer never tries to queue more than (SRP request limit) - 1 SCSI commands to ib_srp. This improves performance for targets whose request limit is less than or equal to SRP_NORMAL_REQ_SQ_SIZE by reducing the number of BUSY responses reported by ib_srp to the SCSI mid-layer. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-25IB/srp: Eliminate two forward declarationsDavid Dillow1-73/+69
Signed-off-by: David Dillow <dillowda@ornl.gov> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2010-10-24IPoIB: Set dev_id field of net_deviceEli Cohen1-0/+1
Use the net device's dev_id field to encode the port number of the pci device. This can be used to to associate a net device with the pci device's port. The encoding is: dev_id = port - 1. Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>