summaryrefslogtreecommitdiff
path: root/drivers/ide/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2018-03-26treewide: simplify Kconfig dependencies for removed archsArnd Bergmann1-1/+1
A lot of Kconfig symbols have architecture specific dependencies. In those cases that depend on architectures we have already removed, they can be omitted. Acked-by: Kalle Valo <kvalo@codeaurora.org> Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2017-11-02block: fix CDROM dependency on BLK_DEVArnd Bergmann1-0/+1
After the cdrom cleanup, I get randconfig warnings for some configurations: warning: (BLK_DEV_IDECD && BLK_DEV_SR) selects CDROM which has unmet direct dependencies (BLK_DEV) This adds an explicit BLK_DEV dependency for both drivers. The other drivers that select 'CDROM' already have this and don't need a change. Fixes: 2a750166a5be ("block: Rework drivers/cdrom/Makefile") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-11-01block: Rework drivers/cdrom/MakefileBart Van Assche1-0/+1
Instead of referring from inside drivers/cdrom/Makefile to all the drivers that use this driver, let these drivers select the cdrom driver. This change makes the cdrom build code follow the approach that is used for most other drivers, namely refer from the higher layers to the lower layer instead of from the lower layer to the higher layers. Reviewed-by: Hannes Reinecke <hare@suse.com> Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Johannes Thumshirn <jthumshirn@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-01-31block: make scsi_request and scsi ioctl support optionalChristoph Hellwig1-0/+1
We only need this code to support scsi, ide, cciss and virtio. And at least for virtio it's a deprecated feature to start with. This should shrink the kernel size for embedded device that only use, say eMMC a bit. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jens Axboe <axboe@fb.com>
2015-04-14Remove celleb-only SCC PATA driversDaniel Axtens1-9/+0
The SCC PATA interface is only used by celleb. celleb has been dropped [1], so drop the drivers. [1] http://patchwork.ozlabs.org/patch/451730/ CC: "David S. Miller" <davem@davemloft.net> CC: linux-ide@vger.kernel.org CC: Valentin Rothberg <valentinrothberg@gmail.com> CC: mpe@ellerman.id.au CC: linuxppc-dev@lists.ozlab.org Acked-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Tejun Heo <tj@kernel.org>
2014-03-17ide: Fix SC1200 dependenciesJean Delvare1-0/+1
The SC1200 is a SoC based on the Geode GX1 32-bit x86 processor, so its drivers are only needed on this architecture, except for build testing purpose. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2014-03-17ide: Fix CS5520 and CS5530 dependenciesJean Delvare1-1/+3
As far as I know, the CS5520 and CS5530 chipsets were only used with 32-bit x86 Geode processors, so I think their drivers are only needed on this architecture, except for build testing purpose. While we're here, simplify the dependencies for the CS5535 driver. Signed-off-by: Jean Delvare <jdelvare@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-11-12Merge tag 'h8300-for-linus' of ↵Linus Torvalds1-7/+0
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging Pull h8300 platform removal from Guenter Roeck: "The patch series has been in -next for more than one relase cycle. I did get a number of Acks, and no objections. H8/300 has been dead for several years, the kernel for it has not compiled for ages, and recent versions of gcc for it are broken. Remove support for it" * tag 'h8300-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: CREDITS: Add Yoshinori Sato for h8300 fs/minix: Drop dependency on H8300 Drop remaining references to H8/300 architecture Drop MAINTAINERS entry for H8/300 watchdog: Drop references to H8300 architecture net/ethernet: Drop H8/300 Ethernet driver net/ethernet: smsc9194: Drop conditional code for H8/300 ide: Drop H8/300 driver Drop support for Renesas H8/300 (h8300) architecture
2013-09-25ide: drop dependency on ARCH_SHARKLinus Walleij1-2/+2
This drops the selection of default IDE chipset for the Shark machine as it has been deleted. Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2013-09-17ide: Drop H8/300 driverGuenter Roeck1-7/+0
Architecture is gone, so there is no need to keep its ide driver around. Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Guenter Roeck <linux@roeck-us.net>
2013-02-22Merge branch 'for-linus' of ↵Linus Torvalds1-5/+0
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial Pull trivial tree from Jiri Kosina: "Assorted tiny fixes queued in trivial tree" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (22 commits) DocBook: update EXPORT_SYMBOL entry to point at export.h Documentation: update top level 00-INDEX file with new additions ARM: at91/ide: remove unsused at91-ide Kconfig entry percpu_counter.h: comment code for better readability x86, efi: fix comment typo in head_32.S IB: cxgb3: delay freeing mem untill entirely done with it net: mvneta: remove unneeded version.h include time: x86: report_lost_ticks doesn't exist any more pcmcia: avoid static analysis complaint about use-after-free fs/jfs: Fix typo in comment : 'how may' -> 'how many' of: add missing documentation for of_platform_populate() btrfs: remove unnecessary cur_trans set before goto loop in join_transaction sound: soc: Fix typo in sound/codecs treewide: Fix typo in various drivers btrfs: fix comment typos Update ibmvscsi module name in Kconfig. powerpc: fix typo (utilties -> utilities) of: fix spelling mistake in comment h8300: Fix home page URL in h8300/README xtensa: Fix home page URL in Kconfig ...
2013-02-05ARM: at91/ide: remove unsused at91-ide Kconfig entryJohan Hovold1-5/+0
Commit cf844751fb25e ("ARM: at91: drop ide driver in favor of the pata one") removed the at91-ide driver but did not remove the Kconfig entry. Signed-off-by: Johan Hovold <jhovold@gmail.com> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2013-01-11drivers/ide: remove depends on CONFIG_EXPERIMENTALKees Cook1-5/+3
The CONFIG_EXPERIMENTAL config item has not carried much meaning for a while now and is almost always enabled by default. As agreed during the Linux kernel summit, remove it from any "depends on" lines in Kconfigs. CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: Kees Cook <keescook@chromium.org> Acked-by: David S. Miller <davem@davemloft.net>
2011-11-04Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds1-3/+3
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-10-25MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss1-3/+3
Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-13Kconfig: remove redundant CONFIG_ prefix on two symbolsPaul Bolle1-1/+1
Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Acked-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-10-13ide: Fix file references in drivers/ide/Johann Felix Soden1-12/+12
Fix file references in drivers/ide/ There are a lot of file references to now moved or deleted files in the whole tree, especially in documentation and Kconfig files. This patch fixes the references in drivers/ide/. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-11Fix file references in drivers/ide/Johann Felix Soden1-12/+12
There are a lot of file references to now moved or deleted files in the whole tree, especially in documentation and Kconfig files. This patch fixes the references in drivers/ide/. Signed-off-by: Johann Felix Soden <johfel@users.sourceforge.net> Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Acked-by: David S. Miller <davem@davemloft.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-21kconfig: rename CONFIG_EMBEDDED to CONFIG_EXPERTDavid Rientjes1-1/+1
The meaning of CONFIG_EMBEDDED has long since been obsoleted; the option is used to configure any non-standard kernel with a much larger scope than only small devices. This patch renames the option to CONFIG_EXPERT in init/Kconfig and fixes references to the option throughout the kernel. A new CONFIG_EMBEDDED option is added that automatically selects CONFIG_EXPERT when enabled and can be used in the future to isolate options that should only be considered for embedded systems (RISC architectures, SLOB, etc). Calling the option "EXPERT" more accurately represents its intention: only expert users who understand the impact of the configuration changes they are making should enable it. Reviewed-by: Ingo Molnar <mingo@elte.hu> Acked-by: David Woodhouse <david.woodhouse@intel.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Greg KH <gregkh@suse.de> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jens Axboe <axboe@kernel.dk> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Robin Holt <holt@sgi.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-10-29ide: update Kconfig text to mark as deprecatedRobert Hancock1-35/+10
The current Kconfig text for CONFIG_IDE doesn't give a hint to users that this subsystem is currently in maintenance mode and isn't actively developed. Let's correct this by marking it as deprecated, and also get rid of a bunch of unnecessary text that doesn't really have anything to do with what the option is for. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-12trivial: Kconfig: .ko is normally not included in module namesPavel Machek1-1/+1
.ko is normally not included in Kconfig help, make it consistent. Signed-off-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-31ide: be able to build pmac driver without IDE built-inGilles Espinasse1-1/+1
No reason to need IDE built-in to be able to compile pmac driver. Tested to work on 2.6.29-rc8 and 2.6.28.8 with ide and pmac as modules inside an initramfs. Signed-off-by: Gilles Espinasse <g.esp@free.fr> Cc: sam@ravnborg.org Cc: benh@kernel.crashing.org [bart: remove now superfluous IDE check] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide: remove CONFIG_BLK_DEV_IDEDOUBLER config optionBartlomiej Zolnierkiewicz1-15/+8
Nowadays it is not worth having a separate config option for Amiga IDE Doubler support so always include it (it still needs to be explicitly enabled by module parameter). Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-31ide: merge ide_arm and ide_generic host driversBartlomiej Zolnierkiewicz1-6/+2
There is no need for a separate ide_arm host driver nowadays so merge it into ide_generic one. While at it: - return -EBUSY from ide_generic_init() if I/O resources are busy - scale down ide_generic_check_pci_legacy_iobases() for CONFIG_PCI=n Cc: Russell King <rmk@arm.linux.org.uk> Cc: Alexander Schulz <alex@shark-linux.de> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-25ide: move xfer mode tuning code to ide-xfer-mode.cBartlomiej Zolnierkiewicz1-0/+8
* Move xfer mode tuning code to ide-xfer-mode.c. * Add CONFIG_IDE_XFER_MODE config option to be selected by host drivers that support xfer mode tuning. * Add CONFIG_IDE_XFER_MODE=n static inline versions of ide_set_pio() and ide_set_xfer_rate(). * Make IDE_TIMINGS and BLK_DEV_IDEDMA config options select IDE_XFER_MODE, also add explicit selects for few host drivers that need it. * Build/link ide-xfer-mode.o and ide-pio-blacklist.o (it is needed only by ide-xfer-mode.o) only if CONFIG_IDE_XFER_MODE=y. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-03-05ide: add at91_ide driverStanislaw Gruszka1-0/+5
This is IDE host driver for AT91 (SAM9, CAP9, AT572D940HF) Static Memory Controller with Compact Flash True IDE Mode logic. Driver have to switch 8/16 bit bus width when accessing Task Tile or Data Register. Moreover some extra things need to be done when setting PIO mode. Only PIO mode is used, hardware have no DMA support. If interrupt line is connected through GPIO extra quirk is needed to cope with fake interrupts. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Cc: Andrew Victor <avictor.za@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-25ide: ide.c 'clear' fix, update "ide=nodma" documentationDavid Fries1-1/+1
Documentation/kernel-parameters.txt - ide=nodma is no longer valid. drivers/ide/Kconfig - The module is ide-core.ko not ide. drivers/ide/ide.c - It took me a while to figure out what the arguments %d.%d:%d to nodma module parameter ment, so I added a comment to each. - Added a comment to each of the sscanf lines. - There is a bug, if j is 0 it would previously clear all the other bits except the current device, changed in three different places. mask &= (1 << i) should be mask &= ~(1 << i). Signed-off-by: David Fries <david@fries.net> [bart: s/disk/device/ in ide.c, beautify patch description] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-02-02ide: add CS5536 host driver (v3)Bartlomiej Zolnierkiewicz1-0/+10
This is a port of libata's pata_cs5536.c (written by Martin K. Petersen) to IDE subsystem. Changes done while at it: * Reprogram PIO/MWDMA timings if needed before and after DMA transfer (chipset uses shared PIO/MWDMA timings). * Fix cable detection to report 80-wires cable if BIOS set it for any device on a port (IDE core will do drive-side cable detection later). * Don't disable UDMA while programming PIO timings. * Simplify PCI/MSR support. Pros of having IDE host driver in addition to libata's one: * IDE is much lighter than SCSI+libata, the host driver itself is also a bit smaller: text data bss dec hex filename 1261 496 4 1761 6e1 drivers/ata/pata_cs5536.o 1242 128 4 1374 55e drivers/ide/cs5536.o * This allows use of IDE features which are unavailable under libata. v2: * Fixes per review from Sergei: - simplify dependency check in Kconfig - use IDE_DRV_MASK also for ->drive_data - disable UDMA when programming MWDMA - program new DTC timings only when necessary - fix printk() level in cs5536_init_one() * Fix patch description according to comments from Alan and Sergei. v3: * Smarter masking of UDMA bits per Sergei's suggestion. Cc: Martin K. Petersen <mkp@mkp.net> Cc: Karl Auerbach <karl@iwl.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-14ide: remove unused CONFIG_BLK_DEV_IDE_AU1XXX_SEQTS_PER_RQBartlomiej Zolnierkiewicz1-5/+0
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-06Resurrect IT8172 IDE controller driverShane McDonald1-0/+7
Support for the IT8172 IDE controller was removed from the kernel sometime after 2.6.18. Support for the only boards that used the IT8172 was removed from the kernel after 2.6.18, as they had never compiled since 2.6.0. However, there are a couple of platforms that use this chip: the PMC-Sierra Xiao Hu thin-client computer, which is no longer in production, and the Linksys NSS4000 Network Attached Storage box, which is based on the Xiao Hu board. I am attempting to add support for the Xiao Hu to the kernel, and this IT8172 IDE controller is the first bit of code in this effort. This patch resurrects the IT8172 IDE controller code. I began with the 2.6.18 version of the it8172.c file, and have moved it forward so that it works with the latest version of the kernel. I have run this driver on a PMC-Sierra Xiao Hu board with the 2.6.28 kernel, and I have had no problems with it in my configuration. The attached patch applies cleanly against 2.6.28. Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: alan@lxorguk.ukuu.org.uk [bart: s/HWIF(drive)/drive->hwif/] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02ide-atapi: accomodate transfer length calculation for ide-cdBorislav Petkov1-0/+1
... by factoring it out of ide_cd_do_request() into a helper, as suggested by Bart. There should be no functionality change resulting from this patch. Signed-off-by: Borislav Petkov <petkovbb@gmail.com> [bart: BLK_DEV_IDECD needs to select IDE_ATAPI now] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2009-01-02remove ide-scsiFUJITA Tomonori1-17/+0
As planed, this removes ide-scsi. The 2.6 kernel supports direct writing to ide CD drives, which eliminates the need for ide-scsi. ide-scsi has been unmaintained and marked as deprecated. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James.Bottomley@HansenPartnership.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-31Merge branch 'devel' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds1-1/+1
* 'devel' of master.kernel.org:/home/rmk/linux-2.6-arm: (407 commits) [ARM] pxafb: add support for overlay1 and overlay2 as framebuffer devices [ARM] pxafb: cleanup of the timing checking code [ARM] pxafb: cleanup of the color format manipulation code [ARM] pxafb: add palette format support for LCCR4_PAL_FOR_3 [ARM] pxafb: add support for FBIOPAN_DISPLAY by dma braching [ARM] pxafb: allow pxafb_set_par() to start from arbitrary yoffset [ARM] pxafb: allow video memory size to be configurable [ARM] pxa: add document on the MFP design and how to use it [ARM] sa1100_wdt: don't assume CLOCK_TICK_RATE to be a constant [ARM] rtc-sa1100: don't assume CLOCK_TICK_RATE to be a constant [ARM] pxa/tavorevb: update board support (smartpanel LCD + keypad) [ARM] pxa: Update eseries defconfig [ARM] 5352/1: add w90p910-plat config file [ARM] s3c: S3C options should depend on PLAT_S3C [ARM] mv78xx0: implement GPIO and GPIO interrupt support [ARM] Kirkwood: implement GPIO and GPIO interrupt support [ARM] Orion: share GPIO IRQ handling code [ARM] Orion: share GPIO handling code [ARM] s3c: define __io using the typesafe version [ARM] S3C64XX: Ensure CPU_V6 is selected ...
2008-12-29ide: move legacy ISA/VLB ports handling to ide-legacy.c (v2)Bartlomiej Zolnierkiewicz1-0/+8
* Move legacy ISA/VLB ports handling from ide-probe.c to ide-legacy.c. * Add CONFIG_IDE_LEGACY config option to be selected by host drivers needing ide-legacy.c. v2: Fix CONFIG_IDE_LEGACY not being defined in Kconfig. (from Takashi Iwai <tiwai@suse.de>) There should be no functional changes caused by this patch. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-12-16Merge branch 'omap3-upstream' of ↵Russell King1-11/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 into devel
2008-12-08ide: build-fix for CONFIG_BLK_DEV_IDEDMA_PMAC=nBartlomiej Zolnierkiewicz1-11/+3
IDE pmac host driver build fails with CONFIG_BLK_DEV_IDEDMA_PMAC=n as reported by Kamalesh: > drivers/ide/pmac.c: In function 'pmac_ide_set_pio_mode': > drivers/ide/pmac.c:527: error: implicit declaration of function 'kauai_lookup_timing' > drivers/ide/pmac.c:527: error: 'shasta_pio_timings' undeclared (first use in this function) > drivers/ide/pmac.c:527: error: (Each undeclared identifier is reported only once > drivers/ide/pmac.c:527: error: for each function it appears in.) > drivers/ide/pmac.c:534: error: 'kauai_pio_timings' undeclared (first use in this function) > drivers/ide/pmac.c: In function 'pmac_ide_do_resume': > drivers/ide/pmac.c:914: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function) > drivers/ide/pmac.c: At top level: > drivers/ide/pmac.c:1007: error: 'pmac_ide_init_dma' undeclared here (not in a function) > drivers/ide/pmac.c: In function 'pmac_ide_setup_device': > drivers/ide/pmac.c:1107: error: 'IDE_WAKEUP_DELAY' undeclared (first use in this function) > drivers/ide/pmac.c: In function 'pmac_ide_macio_attach': > drivers/ide/pmac.c:1209: error: 'pmac_ide_hwif_t' has no member named 'dma_regs' > drivers/ide/pmac.c:1210: error: 'pmac_ide_hwif_t' has no member named 'dma_regs' > make[2]: *** [drivers/ide/pmac.o] Error 1 Fix it by removing the superfluous config option. Reported-and-tested-by: Kamalesh Babulal <kamalesh@linux.vnet.ibm.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-11-27[ARM] clps7500: remove supportRussell King1-1/+1
The CLPS7500 platform has not built since 2.6.22-git7 and there seems to be no interest in fixing it. So, remove the platform support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-10-24ide: Add tx4938ide driver (v2)Atsushi Nemoto1-0/+5
This is the driver for the Toshiba TX4938 SoC EBUS controller ATA mode. It has custom set_pio_mode and some hacks for big endian. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Cc: ralf@linux-mips.org Cc: sshtylyov@ru.mvista.com Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-24ide: Add tx4939ide driver (v6)Atsushi Nemoto1-0/+5
This is the driver for the Toshiba TX4939 SoC ATA controller. This controller has standard ATA taskfile registers and DMA command/status registers, but the register layout is swapped on big endian. There are some other endian issue and some special registers which requires many custom dma_ops/tp_ops routines and build_dmatable. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Cc: ralf@linux-mips.org Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: remove broken hpt34x driverBartlomiej Zolnierkiewicz1-23/+1
No big loss since HPT343/363 controllers are properly supported by pata_hpt3x3 driver from Alan Cox. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-17ide: add generic ATA/ATAPI disk driverBartlomiej Zolnierkiewicz1-34/+30
* Add struct ide_disk_ops containing protocol specific methods. * Add 'struct ide_disk_ops *' to ide_drive_t. * Convert ide-{disk,floppy} drivers to use struct ide_disk_ops. * Merge ide-{disk,floppy} drivers into generic ide-gd driver. While at it: - ide_disk_init_capacity() -> ide_disk_get_capacity() Acked-by: Borislav Petkov <petkovbb@gmail.com> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-16Kconfig: eliminate "def_bool n" constructsJan Beulich1-1/+1
Using "def_bool n" is pointless, simply using bool here appears more appropriate. Further, retaining such options that don't have a prompt and aren't selected by anything seems also at least questionable. Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-10-13ide: remove CONFIG_BLK_DEV_IDE config option (take 2)Bartlomiej Zolnierkiewicz1-36/+2
Because hd.c was moved to drivers/block/ this config option is superfluous now and may be removed. v2: Fix drivers/ide/Makefile (noticed by Adrian Bunk). Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-11ide: remove CONFIG_IDEDISK_MULTI_MODEBartlomiej Zolnierkiewicz1-23/+0
Use multi PIO by default when available and remove no longer needed CONFIG_IDEDISK_MULTI_MODE (it should be safe nowadays, despite to what help entry has been saying). Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-10-05IDE: Fix platform device registration in Swarm IDE driver (v2)Ralf Baechle1-4/+0
The Swarm IDE driver uses a release method which is defined in the driver itself thus potentially oopsable. The simple fix would be to just leak the device but this patch goes the full length and moves the entire handling of the platform device in the platform code and retains only the platform driver code in drivers/ide/mips/swarm.c. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: "Maciej W. Rozycki" <macro@linux-mips.org> Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> [bart: remove no longer needed BLK_DEV_IDE_SWARM from ide/Kconfig] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-09-27ide: note that IDE generic may prevent other drivers from attachingTejun Heo1-0/+14
Enabling IDE generic may prevent ATA controllers located on legacy ports from being attached to more proper driver or can prevent other controllers which share the IRQ from working. Note it in the help message. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: xerces8 <xerces8@butn.net> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: stein@hermes.si [bart: s/will grab/may grab/ since Borislav has fixed PCI-case for .28] Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-09-02ide/Kconfig: mark ide-scsi as deprecatedBartlomiej Zolnierkiewicz1-15/+1
Mark ide-scsi as deprecated and remove stale/bogus documentation. Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-08-05ide: remove CONFIG_IDE_MAX_HWIFSAdrian Bunk1-10/+0
The benefits of a user settable CONFIG_IDE_MAX_HWIFS have become pretty tiny and are no longer considered worth the trouble of an own option. Simply always #define MAX_HWIFS to 10. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-25ide-generic: is no longer needed on ppc32Bartlomiej Zolnierkiewicz1-1/+1
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-07-23ide: mark hpt34x host driver as BROKENBartlomiej Zolnierkiewicz1-0/+1
Alan Cox has noticed some time ago that hpt34x is broken (http://lkml.org/lkml/2007/7/3/257): "No the old driver doesn't even do that. It starts up. It spuriously adjusts some non writable PCI BAR registers, prints a message about resources being in use already then exits." Reported-by: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-22 14:24:27 +0300