summaryrefslogtreecommitdiff
path: root/drivers/gpu
AgeCommit message (Collapse)AuthorFilesLines
2011-01-07drm/radeon/kms: add bo blit support for NIAlex Deucher1-2/+67
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: always use writeback/events for fences on NIAlex Deucher1-0/+5
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: adjust default clock/vddc tracking for pm on DCE5Alex Deucher3-17/+29
NI chips no longer load the MC ucode in the asic_init sequence so the asic comes up in a basic mode with low engine/memory clocks and a voltage. Once the MC ucode is loaded by the driver the card can be programmed to it's proper default clocks and voltage. As such the default clocks in the firmware info table as the post clocks, not the default running clocks. Track the default post clocks and default running clocks separately to handle this. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add backend map workaround for bartsAlex Deucher1-0/+1
Same as Cypress. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: fill gpu init for NI asicsAlex Deucher1-0/+71
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add disabled vbios accessor for NI asicsAlex Deucher1-0/+41
Some systems disable the vbios on secondary cards or cards that have been posted. This code re-enabled the vbios so the driver can load it. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: handle NI thermal controllerAlex Deucher3-0/+8
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: parse DCE5 encoder caps when setting up encodersAlex Deucher3-10/+41
Needed to tell which DIG encoders are HBR2 capable for DP 1.2. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: dvo dpms updates for DCE5Alex Deucher1-1/+15
The DVOOutputControl table was removed for DCE5. DVOEncoderControl now handles everything. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: dac dpms updates for DCE5Alex Deucher1-6/+22
The DAC1OutputControl table was removed for DCE5. DAC1EncoderControl now handles everything. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom dig encoder updatesAlex Deucher1-5/+26
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom transmitter control updatesAlex Deucher1-5/+14
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom spread spectrum updatesAlex Deucher1-1/+25
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 atom SetPixelClock updatesAlex Deucher2-9/+47
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: DCE5 supports 16k display surfacesAlex Deucher1-1/+4
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: update display watermark calculations for DCE5Alex Deucher1-4/+16
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add NI chip familiesAlex Deucher3-0/+7
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: clean up ASIC_IS_DCE41() macroAlex Deucher2-4/+5
only fusion asics are dce4.1 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: fix some typos in evergreen pm4 definesAlex Deucher1-3/+3
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: set the MSB of the HDP slice sizeAlex Deucher1-1/+1
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add support for gen2 pcie link speedsAlex Deucher7-0/+348
Supported on rv6xx/r7xx/evergreen. Cards come up in gen1 mode. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/radeon/kms: add pcie get/set lane support for r6xx/r7xx/evergreenAlex Deucher6-11/+145
Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-07drm/nouveau: create grctx on the fly on all chipsetsBen Skeggs4-12/+14
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-07drm: Update fbdev fb_fix_screeninfoJames Simmons4-24/+21
If you change the color depth via fbset or some other framebuffer aware userland application struct fb_fix_screeninfo is not updated to this new information. This patch fixes this issue. Also the function is changed to just pass in struct drm_framebuffer so in the future we could use more fields. I'm hoping some day fix->smem* could be set here :-) Signed-off-by: James Simmons <jsimmons@infradead.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/nvc0: fix init without firmware presentBen Skeggs1-5/+3
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2011-01-06drm/radeon/kms: add quirk for Mac Radeon HD 2600 cardAlex Deucher1-0/+11
Reported-by: 屋国遥 <hyagni@gmail.com> Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/radeon: use system_wq instead of dev_priv->wqTejun Heo8-44/+23
With cmwq, there's no reason for radeon to use a dedicated workqueue. Drop dev_priv->wq and use system_wq instead. Because radeon_driver_irq_uninstall_kms() may be called from unsleepable context, the work items can't be flushed from there. Instead, init and flush from radeon_irq_kms_init/fini(). While at it, simplify canceling/flushing of rdev->pm.dynpm_idle_work. Always initialize and sync cancel instead of being unnecessarily smart about it. Signed-off-by: Tejun Heo <tj@kernel.org> Acked-by: Alex Deucher <alexdeucher@gmail.com> Cc: dri-devel@lists.freedesktop.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/radeon/kms: manage r300 CMASK RAM access and allow CMASK clearMarek Olšák5-14/+40
The CMASK RAM is for colorbuffer compression (used in conjunction with MSAA). Only one user (filp) can access it. The CMASK RAM access is managed in the same way as Hyper-Z, but there is a separate ioctl, because an app that uses MSAA does not necessarily have to use zbuffering. Signed-off-by: Marek Olšák <maraeo@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-06drm/radeon/kms: adjust quirk for acer laptopAlex Deucher1-10/+11
Acer laptop (TravelMate 5730G) has an HDMI connector on the laptop and a DVI connector on the docking station and both share the same encoder, hpd pin, and ddc line. The bios connector table reflects this and is technically correct, however, we drop the DVI connector here since xrandr has no concept of encoders (only crtcs and connectors) and will try and drive both connectors with different crtcs which isn't possible on the hardware side and leaves no crtcs for LVDS or VGA. Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=32732 Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Cc: stable@kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05vga_switcheroo: split switching into two stages.Dave Airlie1-11/+34
stage 1: turn card on, switch boot vga pointer. stage 2: switch fbs, switch mux and power off old card. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05drm/switcheroo: track state of switch in drivers.Dave Airlie9-12/+35
We need to track the state of the switch in drivers, so that after s/r we don't resume the card we've explicitly switched off before. Also don't allow a userspace open to occur if we've switched the gpu off. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05vga_switcheroo: add reprobe hook for fbcon to recheck connected outputs.Dave Airlie4-0/+15
This adds a hook after the mux is switched for the driver to reprobe the connected outputs. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05nouveau/acpi: improve detection of what is IGD and what is DIS.Dave Airlie1-3/+8
This improves the IGD/DIS picking using firstly if Intel, then if the bus is bus 0. There may be a correct way to do this, but I've no idea what it is. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05drm/nouveau: add delayed switch complete callback.Dave Airlie1-0/+1
this just adds the callback on the delayed switch mechanism. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05vga_switcheroo: add debugging mux switch option.Dave Airlie1-0/+16
This allows the mux to be switched from userspace using MIGD/MDIS command to the switch. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05vga_switcheroo: make power switch handler optionalDave Airlie1-4/+4
At least on the nvidia mux the power switch seems to be executed by the ACPI PS0/PS3 methods so need to do it explicitly. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05vga_switcheroo: print the IGD/DIS flag in the debugfs output.Dave Airlie1-1/+2
We really want to see this so we can confirm that we pick the right one. Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05drm/radeon/kms: implement gpu lockup check for evergreenAlex Deucher2-2/+25
Now that soft reset works, we can add this. Signed-off-by: Alex Deucher <alexdeucher@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-01-05Merge branch 'master' of /home/airlied/kernel/linux-2.6 into drm-core-nextDave Airlie16-46/+129
2011-01-03Fix spelling mistakes in commentsStefan Weil1-2/+2
milisecond -> millisecond meassge -> message Cc: Kalle Valo <kvalo@adurom.com> Cc: Jiri Kosina <trivial@kernel.org> Cc: linux-kernel@vger.kernel.org Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2011-01-01drm/nvc0/pgraph: fix 0x406028/0x405870 initBen Skeggs1-3/+7
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-31drm/nvc0/pgraph: more unit namesBen Skeggs1-6/+6
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-31drm/nvc0/pfifo: support for chipsets with only one PSUBFIFO (0xc1)Ben Skeggs1-6/+12
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-30drm/i915/dvo: Report LVDS attached to ch701x as connectedChris Wilson1-1/+1
As we have already detected something attached to the chip during initialisation, always report the LVDS connector status as connected during probing. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-12-30Revert "drm/i915/bios: Reverse order of 100/120 Mhz SSC clocks"Chris Wilson1-1/+1
As I feared, whilst this fixed the clocks for the Lenovo U160, it broke many other machines. So lets reverts commit 448f53a1ede54eb854d036abf and search for the real bug. Reported-and-tested-by: Travis Hume <travis@computoring.org> [et al] Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=25842 Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=32698 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2010-12-30drm/nvc0: reserve only subc 0 for kernel useBen Skeggs2-9/+15
Current 3D driver expects this behaviour. While this could be changed, there's no compelling reason to reserve more than one subchannel for the DRM. If we ever need to use an object other then M2MF, we can just re-bind subchannel 0 as required. Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-30drm/nv50: sync up gr data error names with rnn, use for nvc0 alsoBen Skeggs3-13/+44
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-30drm/nvc0: parse a couple more PGRAPH_INTRBen Skeggs1-0/+16
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-29drm/nvc0: nuke left-over debug messagesBen Skeggs2-3/+0
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2010-12-29drm/nvc0: kill off a couple more magicsBen Skeggs3-19/+21
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-02 05:52:10 +0300