summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/rockchip
AgeCommit message (Collapse)AuthorFilesLines
2018-07-18drm/rockchip: Substitute is_yuv_support() with format->is_yuvAyan Kumar Halder1-15/+9
drm_format_info table has a field 'is_yuv' to denote if the format is yuv or not. The driver is expected to use this instead of having a function for the same purpose. Signed-off-by: Ayan Kumar halder <ayan.halder@arm.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1531847626-22248-3-git-send-email-ayan.halder@arm.com
2018-07-13drm: drop _mode_ from drm_mode_connector_attach_encoderDaniel Vetter4-4/+4
Again to align with the usual prefix of just drm_connector_. Again done with sed + manual fixup for indent issues. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-7-daniel.vetter@ffwll.ch
2018-07-13drm: drop _mode_ from update_edit_property()Daniel Vetter2-2/+2
Just makes it longer, and for most things in drm_connector.[hc] we just use the drm_connector_ prefix. Done with sed + a bit of manual fixup for the indenting. Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180709084016.23750-6-daniel.vetter@ffwll.ch
2018-07-10drm/panel: Make of_drm_find_panel() return an ERR_PTR() instead of NULLBoris Brezillon1-1/+1
Right now, the DRM panel logic returns NULL when a panel pointing to the passed OF node is not present in the list of registered panels. Most drivers interpret this NULL value as -EPROBE_DEFER, but we are about to modify the semantic of of_drm_find_panel() and let the framework return -ENODEV when the device node we're pointing to has a status property that is not equal to "okay" or "ok". Let's first patch the of_drm_find_panel() implementation to return ERR_PTR(-EPROBE_DEFER) instead of NULL and patch all callers to replace the '!panel' check by an 'IS_ERR(panel)' one. Signed-off-by: Boris Brezillon <boris.brezillon@bootlin.com> Signed-off-by: Thierry Reding <treding@nvidia.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180509130042.9435-2-boris.brezillon@bootlin.com
2018-06-27drm/rockchip: vop: fixup linebuffer mode calc errorSandy Huang1-10/+13
linebuffer mode should be LB_YUV_3840X5 when width is bigger than 1280 in yuv mode. Separate yuv and rgb case makes the scl_vop_cal_lb_mode() logic clearer. Signed-off-by: Sandy Huang <hjc@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1530001004-25036-1-git-send-email-hjc@rock-chips.com
2018-06-27drm/rockchip: Use drm_crtc_mask()Ville Syrjälä1-1/+1
Use drm_crtc_mask() where appropriate. Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180626194716.12522-7-ville.syrjala@linux.intel.com
2018-06-18drm/rockchip: vop: fix irq disabled after vop driver probedSandy Huang1-8/+17
The vop irq is shared between vop and iommu and irq probing in the iommu driver moved to the probe function recently. This can in some cases lead to a stall if the irq is triggered while the vop driver still has it disabled, but the vop irq handler gets called. But there is no real need to disable the irq, as the vop can simply also track its enabled state and ignore irqs in that case. For this we can simply check the power-domain state of the vop, similar to how the iommu driver does it. So remove the enable/disable handling and add appropriate condition to the irq handler. changes in v2: - move to just check the power-domain state - add clock handling changes in v3: - clarify comment to speak of runtime-pm not power-domain changes in v4: - address Marc's comments (clk-enable WARN_ON and style improvement) Fixes: d0b912bd4c23 ("iommu/rockchip: Request irqs in rk_iommu_probe()") Cc: stable@vger.kernel.org Signed-off-by: Sandy Huang <hjc@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Reviewed-by: Marc Zyngier <marc.zyngier@arm.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180612132028.27490-3-heiko@sntech.de
2018-06-18drm/rockchip: vop: split out core clock enablement into separate functionsHeiko Stuebner1-13/+31
Judging from the iommu code, both the hclk and aclk are necessary for register access. Split them off into separate functions from the regular vop enablement, so that we can use them elsewhere as well. Fixes: d0b912bd4c23 ("iommu/rockchip: Request irqs in rk_iommu_probe()") [prerequisite change for the actual fix] Cc: stable@vger.kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de> Tested-by: Ezequiel Garcia <ezequiel@collabora.com> Reviewed-by: Tomasz Figa <tfiga@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180612132028.27490-2-heiko@sntech.de
2018-06-16drm/rockchip: cnd-dp: adjust spdif register settingLin Huang1-15/+1
We use jitter bypass mode for spdif, so do not need to set jitter mode related bit in SPDIF_CTRL_ADDR register. But of course we need to keep the SPDIF_ENABLE bit. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Lin Huang <hl@rock-chips.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1526979222-32478-1-git-send-email-hl@rock-chips.com
2018-06-16drm/rockchip: lvds: add missing of_node_putJulia Lawall1-1/+3
The device node iterators perform an of_node_get on each iteration, so a jump out of the loop requires an of_node_put. The semantic patch that fixes this problem is as follows (http://coccinelle.lip6.fr): // <smpl> @@ expression root,e; local idexpression child; iterator name for_each_child_of_node; @@ for_each_child_of_node(root, child) { ... when != of_node_put(child) when != e = child + of_node_put(child); ? break; ... } ... when != child // </smpl> Fixes: 34cc0aa25456 ("drm/rockchip: Add support for Rockchip Soc LVDS") Cc: stable@vger.kernel.org Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1527102436-13447-6-git-send-email-Julia.Lawall@lip6.fr
2018-05-20drm/rockchip: lvds: avoid duplicating drm_bridge_attachPeter Rosin1-2/+0
drm_bridge_attach takes care of these assignments, so there is no need to open-code them a second time. Signed-off-by: Peter Rosin <peda@axentia.se> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180502074025.12421-3-peda@axentia.se
2018-05-18drm/rockchip: rockchip_drm_fb -> drm_framebufferDaniel Stone3-40/+21
Now that rockchip_drm_fb is just a wrapper around drm_framebuffer, we can remove it. Signed-off-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Heiko Stübner <heiko@sntech.de> Tested-by: Heiko Stübner <heiko@sntech.de> Cc: Sandy Huang <hjc@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180330141138.28987-5-daniels@collabora.com
2018-05-18drm/rockchip: Place GEM BOs in drm_framebufferDaniel Stone1-30/+6
Since drm_framebuffer can now store GEM objects directly, place them there rather than in our own subclass. As this makes the framebuffer create_handle and destroy functions the same as the GEM framebuffer helper, we can reuse those. Signed-off-by: Daniel Stone <daniels@collabora.com> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Heiko Stübner <heiko@sntech.de> Tested-by: Heiko Stübner <heiko@sntech.de> Cc: Sandy Huang <hjc@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180330141138.28987-4-daniels@collabora.com
2018-05-01drm/rockchip: Disable blending for win0Kristian H. Kristensen1-1/+12
Blending win0 with the background color doesn't seem to work correctly. We only get the background color, no matter the contents of the win0 framebuffer. However, blending pre-multiplied color with the default opaque black default background color is a no-op, so we can just disable blending to get the correct result. Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org> Cc: Sandy Huang <hjc@rock-chips.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180418173152.93246-1-hoegsberg@chromium.org
2018-04-24drm/rockchip: psr: Remove flush by CRTCTomasz Figa2-36/+0
It is not used anymore after last changes and it was not even correct to begin with as it assumed a 1:1 relation between a CRTC and encoder, while in fact a CRTC can be attached to multiple encoders. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-28-enric.balletbo@collabora.com
2018-04-24drm/rockchip: Disallow PSR for the whole atomic commitTomasz Figa2-8/+60
Currently PSR flush is triggered from CRTC's .atomic_begin() callback, which is executed after modeset disables and enables and before plane updates are committed. Since PSR flush and re-enable can be triggered asynchronously by external sources (input event, delayed work), it can race with hardware programming done in the aforementioned stages. This patch blocks the PSR completely before hardware programming part begins and unblock after it ends. This relies on reference counted PSR disable introduced with previous patch. Cc: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-27-enric.balletbo@collabora.com
2018-04-24drm/rockchip: psr: Sanitize semantics of allow/inhibit APITomasz Figa3-17/+46
Currently both rockchip_drm_psr_activate() and _deactivate() only set the boolean "active" flag without actually making sure that hardware state complies with it. Since we are going to extend the usage of this API to properly lock PSR for the duration of atomic commits, we change the semantics in following way: - a counter is used to track the number of inhibit requests, - PSR is actually disabled in hardware on first inhibit request, - PSR enable work is scheduled on last allow request. The above allows using the API as a way to deterministically synchronize PSR state changes with other DRM events, i.e. atomic commits and cursor updates. As a nice side effect, the naming is sorted out and we have "inhibit" for stopping the software logic and "enable" for hardware state. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-26-enric.balletbo@collabora.com
2018-04-24drm/rockchip: psr: Avoid redundant calls to .set() callbackTomasz Figa1-56/+24
The first time after we call rockchip_drm_do_flush() after rockchip_drm_psr_register(), we go from PSR_DISABLE to PSR_FLUSH. The difference between PSR_DISABLE and PSR_FLUSH is whether or not we have a delayed work pending - PSR is off in either state. However psr_set_state() only catches the transition from PSR_FLUSH to PSR_DISABLE (which never happens), while going from PSR_DISABLE to PSR_FLUSH triggers a call to psr->set() to disable PSR while it's already disabled. This triggers the eDP PHY power-on sequence without being shut down first and this seems to occasionally leave the encoder unable to later enable PSR. Let's just simplify the state machine and simply consider PSR_DISABLE and PSR_FLUSH the same state. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-25-enric.balletbo@collabora.com
2018-04-24drm/rockchip: analogix_dp: Do not call Analogix code before bindTomasz Figa1-0/+9
Driver callbacks, such as system suspend or resume can be called any time, specifically they can be called before the component bind callback. Let's use dp->adp pointer as a safeguard and skip calling Analogix entry points if it is an ERR_PTR(). Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-24-enric.balletbo@collabora.com
2018-04-24drm/bridge: analogix_dp: Split the platform-specific poweron in two partsDouglas Anderson1-2/+10
Some of the platform-specific stuff in rockchip_dp_poweron() needs to happen before the generic code. Some needs to happen after. Let's split the callback in two. Specifically we can't start doing PSR work until _after_ the whole controller is up, so don't set the enable until the end. Cc: Kristian H. Kristensen <hoegsberg@chromium.org> Signed-off-by: Douglas Anderson <dianders@chromium.org> [seanpaul added exynos change] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-23-enric.balletbo@collabora.com
2018-04-24drm/rockchip: pre dither down when output bpc is 8bitMark Yao5-0/+11
Some encoder have a crc verification check, crc check fail if input and output data is not equal. That means encoder input and output need use same color depth, vop can output 10bit data to encoder, but some panel only support 8bit depth, that would make crc check die. So pre dither down vop data to 8bit if panel's bpc is 8. Signed-off-by: Mark Yao <mark.yao@rock-chips.com> [seanpaul resolved conflict in rockchip_drm_vop.c] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-22-enric.balletbo@collabora.com
2018-04-24drm/rockchip: Restore psr->state when enable/disable psr failedzain wang3-13/+19
If we failed disable psr, it would hang the display until next psr cycle coming. So we should restore psr->state when it failed. Cc: Tomasz Figa <tfiga@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Heiko Stuebner <heiko@sntech.de> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Andrzej Hajda <a.hajda@samsung.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180423105003.9004-14-enric.balletbo@collabora.com
2018-04-17drm/rockchip: fix VOP vblank raceJohn Keeping1-1/+1
We have seen a case of a bad reference count for vblanks with the Rockchip VOP: ------------[ cut here ]------------ WARNING: CPU: 1 PID: 383 at drivers/gpu/drm/drm_irq.c:1198 drm_vblank_put+0x40/0xcc Modules linked in: brcmfmac brcmutil CPU: 1 PID: 383 Comm: kworker/u8:2 Not tainted 4.9.75-rt60 #1 Hardware name: Rockchip (Device Tree) Workqueue: events_unbound flip_worker Backtrace: [<c010b7b0>] (dump_backtrace) from [<c010ba4c>] (show_stack+0x18/0x1c) r7:c0b1b13c r6:600b0013 r5:00000000 r4:c0b1b13c [<c010ba34>] (show_stack) from [<c032d248>] (dump_stack+0x78/0x94) [<c032d1d0>] (dump_stack) from [<c011e6e8>] (__warn+0xe4/0x104) r7:00000009 r6:c03cf26c r5:00000000 r4:00000000 [<c011e604>] (__warn) from [<c011e7c0>] (warn_slowpath_null+0x28/0x30) r9:eeb443a0 r8:eeb443c8 r7:ee8a5ec0 r6:ee8a5ec0 r5:edb47f00 r4:ee096200 [<c011e798>] (warn_slowpath_null) from [<c03cf26c>] (drm_vblank_put+0x40/0xcc) [<c03cf22c>] (drm_vblank_put) from [<c03cf310>] (drm_crtc_vblank_put+0x18/0x1c) r5:edb47f00 r4:ee3c8a80 [<c03cf2f8>] (drm_crtc_vblank_put) from [<c03ef9b4>] (vop_fb_unref_worker+0x18/0x24) [<c03ef99c>] (vop_fb_unref_worker) from [<c03df194>] (flip_worker+0x98/0xb4) r5:edb47f00 r4:eeb443a8 [<c03df0fc>] (flip_worker) from [<c0134808>] (process_one_work+0x1a8/0x2fc) r9:00000000 r8:ee807d00 r7:00000000 r6:ee809c00 r5:eeb443a8 r4:edfe5f80 [<c0134660>] (process_one_work) from [<c01358ec>] (worker_thread+0x2ac/0x458) r10:00000088 r9:edfe5f98 r8:ee809c2c r7:c0b04100 r6:ee809c00 r5:ee809c00 r4:edfe5f80 [<c0135640>] (worker_thread) from [<c013a0bc>] (kthread+0xfc/0x10c) r10:00000000 r9:00000000 r8:c0135640 r7:edfe5f80 r6:00000000 r5:edf0e240 r4:ee8a4000 r3:ed194e00 [<c0139fc0>] (kthread) from [<c0107cb8>] (ret_from_fork+0x14/0x3c) r8:00000000 r7:00000000 r6:00000000 r5:c0139fc0 r4:edf0e240 ---[ end trace 0000000000000002 ]--- It seems that this is caused by unfortunate timing between vop_crtc_atomic_flush() and vop_handle_vblank() given the following ordering: atomic_flush handle_vblank ------------ ------------- drm_flip_work_queue set_bit if (test_and_clear_bit(...)) drm_flip_work_commit drm_vblank_get This results in vop_fb_unref_worker (called as flip work) decrementing the vblank refcount before it has been incremented. Signed-off-by: John Keeping <john@metanate.com> Reviewed-by: Sandy huang <hjc@rock-chips.com> Signed-off-by: Sandy Huang <hjc@rock-chips.com> Link: https://patchwork.freedesktop.org/patch/msgid/20180328160351.23763-1-john@metanate.com
2018-03-28drm/rockchip: fixup comment for gem_free_object_unlockedDaniel Vetter1-2/+2
Just want to clean out all grep hits. gem_free_object is deprecated. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-rockchip@lists.infradead.org Reviewed-by: Sean Paul <seanpaul@chromium.org> Link: https://patchwork.freedesktop.org/patch/msgid/20180327082356.24516-2-daniel.vetter@ffwll.ch
2018-03-16drm/rockchip: cdn-dp: remove the DP phy switchChris Zhong1-7/+0
There are 2 Type-c PHYs in RK3399, but only one DP controller. Hence only one PHY can connect to DP controller at one time, the other should be disconnected. The GRF_SOC_CON26 register has a switch bit to do it, set this bit means enable PHY 1, clear this bit means enable PHY 0. If the board has 2 Type-C ports, the DP driver get the phy id from devm_of_phy_get_by_index, and then control this switch according to this id. But some others board only has one Type-C port, it may be PHY 0 or PHY 1. The dts node id can not tell us the correct PHY id. Hence move this switch to PHY driver, the PHY driver can distinguish between PHY 0 and PHY 1, and then write the correct register bit. Signed-off-by: Chris Zhong <zyw@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> [The phy-changes are in the phy-tree now and the cdn-dp wasn't enabled at all so far, so this change can go through drm-misc alone without causing issues when testing drm-misc] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180216120956.19034-6-enric.balletbo@collabora.com
2018-03-14drm/rockchip: Don't use spin_lock_irqsave in interrupt contextMarc Zyngier1-6/+4
The rockchip DRM driver is quite careful to disable interrupts when taking a lock that is also taken in interrupt context, which is a good thing. What is a bit over the top is to use spin_lock_irqsave when already in interrupt context, as you cannot take another interrupt again, and disabling interrupt is just pure overhead. Switching to the non _irqsave version in interrupt context is more logical, and less heavy handed. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180220130120.5254-4-marc.zyngier@arm.com
2018-03-14drm/rockchip: Do not use memcpy for MMIO addressesMarc Zyngier1-4/+7
memcpy is only meant to be used for memory, and only that. MMIO accessors should be used to access MMIO regions, preferably the ones that correspond to the size of the register accessed. Let's convert the bulk register copy to writel/readl_relaxed, which is the correct API. Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180220130120.5254-3-marc.zyngier@arm.com
2018-03-14drm/rockchip: Clear all interrupts before requesting the IRQMarc Zyngier1-11/+12
Calling request_irq() followed by disable_irq() is usually a bad idea, specially if the interrupt can be pending, and you're not yet in a position to handle it. This is exactly what happens on my kevin system when rebooting in a second kernel using kexec: Some interrupt is left pending from the previous kernel, and we take it too early, before disable_irq() could do anything. Let's clear the pending interrupts as we initialize the HW, and move the interrupt request after that point. This ensures that we're in a sane state when the interrupt is requested. Cc: stable@vger.kernel.org Signed-off-by: Marc Zyngier <marc.zyngier@arm.com> [adapted to recent rockchip-drm changes] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180220130120.5254-2-marc.zyngier@arm.com
2018-03-14drm/rockchip: add mutex vop lockzain wang1-6/+24
Add a lock to vop to avoid disabling the crtc while waiting for a line flag while enabling psr. If we disable in the middle of waiting for the line flag, we'll end up timing out or worse. Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222327.18689-5-enric.balletbo@collabora.com
2018-03-14drm/bridge: analogix_dp: Don't change psr while bridge is disabledzain wang1-1/+1
There is a race between AUX CH bring-up and enabling bridge which will cause link training to fail. To avoid hitting it, don't change psr state while enabling the bridge. Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Sean Paul <seanpaul@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> [seanpaul fixed up the commit message a bit and renamed *_supported to *_enabled] Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Tested-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222327.18689-4-enric.balletbo@collabora.com
2018-03-14drm/rockchip: Remove analogix psr workerSean Paul1-29/+2
Now that the spinlocks and timers are gone, we can remove the psr worker located in rockchip's analogix driver and do the enable/disable directly. This should simplify the code and remove races on disable. Cc: 征增 王 <wzz@rock-chips.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180309222327.18689-3-enric.balletbo@collabora.com
2018-03-09drm/rockchip: Don't use atomic constructs for psrSean Paul3-41/+31
Instead of using timer and spinlocks, use delayed_work and mutexes for rockchip psr. This allows us to make blocking calls when enabling/disabling psr (which is sort of important given we're talking over dpcd to the display). Cc: Caesar Wang <wxt@rock-chips.com> Cc: 征增 王 <wzz@rock-chips.com> Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180305222324.5872-3-enric.balletbo@collabora.com
2018-03-09drm/rockchip: analogix_dp: set psr activate/deactivate when enable/disable ↵zain wang4-13/+32
bridge There's a race between when bridge_disable and when vop_crtc_disable are called. If the flush timer triggers a new psr work between these, we will operate eDP without power shutdowned by bridge_disable. In this case, moving activate/deactivate to enable/disable bridge to avoid it. Cc: Stéphane Marchesin <marcheu@chromium.org> Signed-off-by: zain wang <wzz@rock-chips.com> Signed-off-by: Caesar Wang <wxt@rock-chips.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180305222324.5872-2-enric.balletbo@collabora.com
2018-03-08drm/rockchip: dw_hdmi: Move HDMI vpll clock enable to bind()Jeffy Chen1-8/+9
The HDMI vpll clock should be enabled when bind() is called. So move the clk_prepare_enable of that clock to bind() function and add the missing clk_disable_unprepare() required in error handling path and unbind(). Fixes: 12b9f204e804 ("drm: bridge/dw_hdmi: add rockchip rk3288 support") Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180302175757.28192-5-enric.balletbo@collabora.com
2018-03-08drm/rockchip: inno_hdmi: reorder clk_disable_unprepare call in unbindJeffy Chen1-1/+1
In bind the clk_prepare_enable of the HDMI pclk is called before adding the i2c_adapter. So it should be the other way around in unbind, first remove the i2c_adapter and then call the clk_disable_unprepare. Fixes: 412d4ae6b7a5 ("drm/rockchip: hdmi: add Innosilicon HDMI support") Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180302175757.28192-4-enric.balletbo@collabora.com
2018-03-08drm/rockchip: inno_hdmi: Fix error handling path.Jeffy Chen1-4/+16
Add missing error handling in bind(). Fixes: 412d4ae6b7a5 ("drm/rockchip: hdmi: add Innosilicon HDMI support") Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> [moved clk_disable_unprepare reordering in unbind to separate patch] Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180302175757.28192-3-enric.balletbo@collabora.com
2018-03-08drm/rockchip: dw-mipi-dsi: Fix connector and encoder cleanup.Jeffy Chen1-2/+6
In bind()'s error handling path call destroy functions instead of cleanup functions for encoder and connector and reorder to match how is called in bind(). In unbind() call the connector and encoder destroy functions. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180302175757.28192-2-enric.balletbo@collabora.com
2018-03-05drm: Don't pass clip to drm_atomic_helper_check_plane_state()Ville Syrjälä1-6/+1
Move the plane clip rectangle handling into drm_atomic_helper_check_plane_state(). Drivers no longer have to worry about such mundane details. v2: Convert armada, rcar, and sun4i as well v3: Resolve simple_kms_helper conflict Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Gustavo Padovan <gustavo@padovan.org> Cc: Sean Paul <seanpaul@chromium.org> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Sandy Huang <hjc@rock-chips.com> Cc: "Heiko Stübner" <heiko@sntech.de> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: VMware Graphics <linux-graphics-maintainer@vmware.com> Cc: Sinclair Yeh <syeh@vmware.com> Cc: Thomas Hellstrom <thellstrom@vmware.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Archit Taneja <architt@codeaurora.org> Cc: linux-amlogic@lists.infradead.org Cc: linux-arm-msm@vger.kernel.org Cc: freedreno@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-tegra@vger.kernel.org Cc: Russell King <rmk+kernel@armlinux.org.uk> Suggested-by: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Thierry Reding <treding@nvidia.com> Reviewed-by: Archit Taneja <architt@codeaurora.org> #msm Link: https://patchwork.freedesktop.org/patch/msgid/20180123170857.13818-5-ville.syrjala@linux.intel.com Acked-by: Liviu Dudau <liviu.dudau@arm.com> #hdlcd,malidp Acked-by: Philipp Zabel <p.zabel@pengutronix.de> #imx,mtk Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Sinclair Yeh <syeh@vmware.com> #vmwgfx Acked-by: Neil Armstrong <narmstrong@baylibre.com> #meson Acked-by: Shawn Guo <shawnguo@kernel.org> #zte
2018-03-01drm/rockchip: analogix_dp: reorder psr_unregister call in unbindJeffy Chen1-1/+1
In bind the psr handler gets registered first before the core analogix_dp_bind() gets called. So it should be the other way around in unbind, first unbind the analogix_dp and then unregister the psr. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/76025075.yWNtk1v57f@phil
2018-03-01drm/rockchip: analogix_dp: Add a sanity check for rockchip_drm_psr_register()Jeffy Chen1-3/+10
The rockchip_drm_psr_register() can fail, so add a sanity check for that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> [moved psr_unregister reordering in unbind to separate patch] Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-4-thierry.escande@collabora.com
2018-03-01drm/bridge: analogix_dp: Fix connector and encoder cleanupJeffy Chen1-7/+5
Since we are initing connector in the core driver and encoder in the plat driver, let's clean them up in the right places. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-3-thierry.escande@collabora.com
2018-03-01drm/bridge: analogix: Do not use device's drvdataJeffy Chen1-20/+28
The driver that instantiates the bridge should own the drvdata, as all driver model callbacks (probe, remove, shutdown, PM ops, etc.) are also owned by its driver struct. Moreover, storing two different pointer types in driver data depending on driver initialization status is barely a good practice and in fact has led to many bugs in this driver. Let's clean up this mess and change Analogix entry points to simply accept some opaque struct pointer, adjusting their users at the same time to avoid breaking the compilation. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Acked-by: Jingoo Han <jingoohan1@gmail.com> Acked-by: Archit Taneja <architt@codeaurora.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180110162348.22765-2-thierry.escande@collabora.com
2018-03-01drm/rockchip: vop: Init vskiplines in scl_vop_cal_scale()Jeffy Chen1-1/+4
Currently we are calling scl_vop_cal_scale() to get vskiplines for yrgb and cbcr. So the cbcr's vskiplines might be an unexpected value if the second scl_vop_cal_scale() didn't update it. Init vskiplines in scl_vop_cal_scale() to avoid that. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Reviewed-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180223062250.10470-1-jeffy.chen@rock-chips.com
2018-03-01drm/rockchip: Add device links for master and componentsJeffy Chen1-1/+22
Since we are trying to access components' resources in the master's suspend/resume PM callbacks(e.g. panel), add device links to correct the suspend/resume and shutdown ordering. Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com> Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180207175309.21095-1-enric.balletbo@collabora.com
2018-02-18drm/rockchip: Respect page offset for PRIME mmap callsØrjan Eide1-1/+6
When mapping external DMA-bufs through the PRIME mmap call, we might be given an offset which has to be respected. However for the internal DRM GEM mmap path, we have to ignore the fake mmap offset used to identify the buffer only. Currently the code always zeroes out vma->vm_pgoff, which breaks the former. This patch fixes the problem by moving the vm_pgoff assignment to a function that is used only for GEM mmap path, so that the PRIME path retains the original offset. Cc: Daniel Kurtz <djkurtz@chromium.org> Signed-off-by: Ørjan Eide <orjan.eide@arm.com> Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180130202913.28724-4-thierry.escande@collabora.com
2018-02-18drm/rockchip: support prime import sg tableHaixia Shi3-9/+115
The prime fd to handle ioctl was not used with rockchip before. Support was added in order to pass graphics_Gbm and to support potential uses within Chrome OS (e.g. zero-copy video decode, camera). Signed-off-by: Haixia Shi <hshi@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Tested-by: Heiko Stuebner <heiko@sntech.de> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180130202913.28724-3-thierry.escande@collabora.com
2018-02-18drm/rockchip: Get rid of unnecessary struct fieldsTomasz Figa1-5/+0
This patch removes unused fields from vop structure. Signed-off-by: Tomasz Figa <tfiga@chromium.org> Signed-off-by: Sean Paul <seanpaul@chromium.org> Signed-off-by: Thierry Escande <thierry.escande@collabora.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/20180130202913.28724-2-thierry.escande@collabora.com
2018-02-18drm/rockchip: inno_hdmi: Remove unnecessary platform_get_resource() error checkFabio Estevam1-3/+0
devm_ioremap_resource() already checks if the resource is NULL, so remove the unnecessary platform_get_resource() error check. Cc: Heiko Stübner <heiko@sntech.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1513602150-7542-4-git-send-email-festevam@gmail.com
2018-02-18drm/rockchip: dsi: Remove unnecessary platform_get_resource() error checkFabio Estevam1-3/+0
devm_ioremap_resource() already checks if the resource is NULL, so remove the unnecessary platform_get_resource() error check. Cc: Heiko Stübner <heiko@sntech.de> Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://patchwork.freedesktop.org/patch/msgid/1513602150-7542-3-git-send-email-festevam@gmail.com
2018-02-16Merge airlied/drm-next into drm-misc-nextSean Paul1-0/+1
Backmerge 4.15 and hdcp topic branch Signed-off-by: Sean Paul <seanpaul@chromium.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 22:52:07 +0300