| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Since free_engines works for partially constructed engine sets, we can
use the usual goto pattern.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-18-jason@jlekstrand.net
|
|
The current context uAPI allows for two methods of setting context
parameters: SET_CONTEXT_PARAM and CONTEXT_CREATE_EXT_SETPARAM. The
former is allowed to be called at any time while the later happens as
part of GEM_CONTEXT_CREATE. Currently, everything settable via one is
settable via the other. While some params are fairly simple and setting
them on a live context is harmless such the context priority, others are
far trickier such as the VM or the set of engines. In order to swap out
the VM, for instance, we have to delay until all current in-flight work
is complete, swap in the new VM, and then continue. This leads to a
plethora of potential race conditions we'd really rather avoid.
Unfortunately, both methods of setting the VM and the engine set are in
active use today so we can't simply disallow setting the VM or engine
set vial SET_CONTEXT_PARAM. In order to work around this wart, this
commit adds a proto-context struct which contains all the context create
parameters.
v2 (Daniel Vetter):
- Better commit message
- Use __set/clear_bit instead of set/clear_bit because there's no race
and we don't need the atomics
v3 (Daniel Vetter):
- Use manual bitops and BIT() instead of __set_bit
v4 (Daniel Vetter):
- Add a changelog to the commit message
- Better hyperlinking in docs
- Create the default PPGTT in i915_gem_create_context
v5 (Daniel Vetter):
- Hand-roll the initialization of UCONTEXT_PERSISTENCE
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-17-jason@jlekstrand.net
|
|
In order to prevent kernel doc warnings, also fill out docs for any
missing fields and fix those that forgot the "@".
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-16-jason@jlekstrand.net
|
|
With the proto-context stuff added later in this series, we end up
having to duplicate set_priority. This lets us avoid duplicating the
validation logic.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-15-jason@jlekstrand.net
|
|
As far as I can tell, the only real reason for this is to avoid taking a
reference to the i915_gem_context. The cost of those two atomics
probably pales in comparison to the cost of the ioctl itself so we're
really not buying ourselves anything here. We're about to make context
lookup a tiny bit more complicated, so let's get rid of the one hand-
rolled case.
Some usermode drivers such as our Vulkan driver call GET_RESET_STATS on
every execbuf so the perf here could theoretically be an issue. If this
ever does become a performance issue for any such userspace drivers,
they can use set CONTEXT_PARAM_RECOVERABLE to false and look for -EIO
coming from execbuf to check for hangs instead.
v2 (Daniel Vetter):
- Add a comment in the commit message about recoverable contexts
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-14-jason@jlekstrand.net
|
|
There's no sense in allowing userspace to create more engines than it
can possibly access via execbuf.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-13-jason@jlekstrand.net
|
|
This was only ever used for FENCE_SUBMIT automatic engine selection
which was removed in the previous commit.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-12-jason@jlekstrand.net
|
|
Even though FENCE_SUBMIT is only documented to wait until the request in
the in-fence starts instead of waiting until it completes, it has a bit
more magic than that. If FENCE_SUBMIT is used to submit something to a
balanced engine, we would wait to assign engines until the primary
request was ready to start and then attempt to assign it to a different
engine than the primary. There is an IGT test (the bonded-slice subtest
of gem_exec_balancer) which exercises this by submitting a primary batch
to a specific VCS and then using FENCE_SUBMIT to submit a secondary
which can run on any VCS and have i915 figure out which VCS to run it on
such that they can run in parallel.
However, this functionality has never been used in the real world. The
media driver (the only user of FENCE_SUBMIT) always picks exactly two
physical engines to bond and never asks us to pick which to use.
v2 (Daniel Vetter):
- Mention the exact IGT test this breaks
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-11-jason@jlekstrand.net
|
|
This adds a bunch of complexity which the media driver has never
actually used. The media driver does technically bond a balanced engine
to another engine but the balanced engine only has one engine in the
sibling set. This doesn't actually result in a virtual engine.
This functionality was originally added to handle cases where we may
have more than two video engines and media might want to load-balance
their bonded submits by, for instance, submitting to a balanced vcs0-1
as the primary and then vcs2-3 as the secondary. However, no such
hardware has shipped thus far and, if we ever want to enable such
use-cases in the future, we'll use the up-and-coming parallel submit API
which targets GuC submission.
This makes I915_CONTEXT_ENGINES_EXT_BOND a total no-op. We leave the
validation code in place in case we ever decide we want to do something
interesting with the bonding information.
v2 (Jason Ekstrand):
- Don't delete quite as much code.
v3 (Tvrtko Ursulin):
- Add some history to the commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-10-jason@jlekstrand.net
|
|
This has never been used by any userspace except IGT and provides no
real functionality beyond parroting back parameters userspace passed in
as part of context creation or via setparam. If the context is in
legacy mode (where you use I915_EXEC_RENDER and friends), it returns
success with zero data so it's not useful for discovering what engines
are in the context. It's also not a replacement for the recently
removed I915_CONTEXT_CLONE_ENGINES because it doesn't return any of the
balancing or bonding information.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-9-jason@jlekstrand.net
|
|
This API is entirely unnecessary and I'd love to get rid of it. If
userspace wants a single timeline across multiple contexts, they can
either use implicit synchronization or a syncobj, both of which existed
at the time this feature landed. The justification given at the time
was that it would help GL drivers which are inherently single-timeline.
However, neither of our GL drivers actually wanted the feature. i965
was already in maintenance mode at the time and iris uses syncobj for
everything.
Unfortunately, as much as I'd love to get rid of it, it is used by the
media driver so we can't do that. We can, however, do the next-best
thing which is to embed a syncobj in the context and do exactly what
we'd expect from userspace internally. This isn't an entirely identical
implementation because it's no longer atomic if userspace races with
itself by calling execbuffer2 twice simultaneously from different
threads. It won't crash in that case; it just doesn't guarantee any
ordering between those two submits. It also means that sync files
exported from different engines on a SINGLE_TIMELINE context will have
different fence contexts. This is visible to userspace if it looks at
the obj_name field of sync_fence_info.
Moving SINGLE_TIMELINE to a syncobj emulation has a couple of technical
advantages beyond mere annoyance. One is that intel_timeline is no
longer an api-visible object and can remain entirely an implementation
detail. This may be advantageous as we make scheduler changes going
forward. Second is that, together with deleting the CLONE_CONTEXT API,
we should now have a 1:1 mapping between intel_context and
intel_timeline which may help us reduce locking.
v2 (Tvrtko Ursulin):
- Update the comment on i915_gem_context::syncobj to mention that it's
an emulation and the possible race if userspace calls execbuffer2
twice on the same context concurrently.
v2 (Jason Ekstrand):
- Wrap the checks for eb.gem_context->syncobj in unlikely()
- Drop the dma_fence reference
- Improved commit message
v3 (Jason Ekstrand):
- Move the dma_fence_put() to before the error exit
v4 (Tvrtko Ursulin):
- Add a comment about fence contexts to the commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-8-jason@jlekstrand.net
|
|
This API allows one context to grab bits out of another context upon
creation. It can be used as a short-cut for setparam(getparam()) for
things like I915_CONTEXT_PARAM_VM. However, it's never been used by any
real userspace. It's used by a few IGT tests and that's it. Since it
doesn't add any real value (most of the stuff you can CLONE you can copy
in other ways), drop it.
There is one thing that this API allows you to clone which you cannot
clone via getparam/setparam: timelines. However, timelines are an
implementation detail of i915 and not really something that needs to be
exposed to userspace. Also, sharing timelines between contexts isn't
obviously useful and supporting it has the potential to complicate i915
internally. It also doesn't add any functionality that the client can't
get in other ways. If a client really wants a shared timeline, they can
use a syncobj and set it as an in and out fence on every submit.
v2 (Jason Ekstrand):
- More detailed commit message
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-7-jason@jlekstrand.net
|
|
None of the callbacks we use with it return an error code anymore; they
all return 0 unconditionally.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-6-jason@jlekstrand.net
|
|
Instead of handling it like a context param, unconditionally set it when
intel_contexts are created. For years we've had the idea of a watchdog
uAPI floating about. The aim was for media, so that they could set very
tight deadlines for their transcodes jobs, so that if you have a corrupt
bitstream (especially for decoding) you don't hang your desktop too
hard. But it's been stuck in limbo since forever, and this simplifies
things a bit in preparation for the proto-context work. If we decide to
actually make said uAPI a reality, we can do it through the proto-
context easily enough.
This does mean that we move from reading the request_timeout_ms param
once per engine when engines are created instead of once at context
creation. If someone changes request_timeout_ms between creating a
context and setting engines, it will mean that they get the new timeout.
If someone races setting request_timeout_ms and context creation, they
can theoretically end up with different timeouts. However, since both
of these are fairly harmless and require changing kernel params, we
don't care.
v2 (Tvrtko Ursulin):
- Add a comment about races with request_timeout_ms
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-5-jason@jlekstrand.net
|
|
The idea behind this param is to support OpenCL drivers with relocations
because OpenCL reserves 0x0 for NULL and, if we placed memory there, it
would confuse CL kernels. It was originally sent out as part of a patch
series including libdrm [1] and Beignet [2] support. However, the
libdrm and Beignet patches never landed in their respective upstream
projects so this API has never been used. It's never been used in Mesa
or any other driver, either.
Dropping this API allows us to delete a small bit of code.
[1]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067030.html
[2]: https://lists.freedesktop.org/archives/intel-gfx/2015-May/067031.html
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-4-jason@jlekstrand.net
|
|
Previously, we were storing the ring size in the ring pointer before it
was actually allocated. We would then guard setting the ring size on
checking for CONTEXT_ALLOC_BIT. This is error-prone at best and really
only saves us a few bytes on something that already burns at least 4K.
Instead, this patch adds a new ring_size field and makes everything use
that.
v2 (Daniel Vetter):
- Replace 512 * SZ_4K with SZ_2M
v2 (Jason Ekstrand):
- Rebase on top of page migration code
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-3-jason@jlekstrand.net
|
|
This reverts commit 88be76cdafc7 ("drm/i915: Allow userspace to specify
ringsize on construction"). This API was originally added for OpenCL
but the compute-runtime PR has sat open for a year without action so we
can still pull it out if we want. I argue we should drop it for three
reasons:
1. If the compute-runtime PR has sat open for a year, this clearly
isn't that important.
2. It's a very leaky API. Ring size is an implementation detail of the
current execlist scheduler and really only makes sense there. It
can't apply to the older ring-buffer scheduler on pre-execlist
hardware because that's shared across all contexts and it won't
apply to the GuC scheduler that's in the pipeline.
3. Having userspace set a ring size in bytes is a bad solution to the
problem of having too small a ring. There is no way that userspace
has the information to know how to properly set the ring size so
it's just going to detect the feature and always set it to the
maximum of 512K. This is what the compute-runtime PR does. The
scheduler in i915, on the other hand, does have the information to
make an informed choice. It could detect if the ring size is a
problem and grow it itself. Or, if that's too hard, we could just
increase the default size from 16K to 32K or even 64K instead of
relying on userspace to do it.
Let's drop this API for now and, if someone decides they really care
about solving this problem, they can do it properly.
Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708154835.528166-2-jason@jlekstrand.net
|
|
Add ADL-P to the list of supported GuC and HuC firmware versions. For
HuC, it reuses the existing TGL firmware file. For GuC, there is a
dedicated firmware release.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210626004522.1699509-3-John.C.Harrison@Intel.com
|
|
A new HuC is available for TGL and compatible platforms, so switch to
using it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210626004522.1699509-2-John.C.Harrison@Intel.com
|
|
The 'has_cdclk_crawl' field in our device info structure is a boolean
flag and doesn't need a whole u8. Add it as another 1-bit feature flag
and move it to the display section. While we're at it, replace the
has_cdclk_crawl() function with a macro for consistency with our
handling of other feature flags.
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707234206.2002849-1-matthew.d.roper@intel.com
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
|
|
Add a small helper to keep intel_plane_helper_funcs static.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210518132426.7567-1-jani.nikula@intel.com
|
|
46 bit addressing enables you to use 4 bits to support some
MKTME features, and 3 more bits for Optane support that uses
a subset of MTKME for persistent memory.
But GTT addressing sticking to 39 bit addressing, thus setting
dma_mask_size to 39 fixes below tests :
igt@i915_selftest@live@mman
igt@kms_big_fb@linear-32bpp-rotate-0
igt@gem_create@create-clear
igt@gem_mmap_offset@clear
igt@gem_mmap_gtt@cpuset-big-copy
In a way solves Gitlab#3142
https://gitlab.freedesktop.org/drm/intel/-/issues/3142, which had
following errors :
DMAR: DRHD: handling fault status reg 2
DMAR: [DMA Write] Request device [00:02.0] PASID ffffffff fault addr
7effff9000 [fault reason 05] PTE Write access is not set
0x7effff9000 is suspiciously exactly 39 bits, so it seems likely that
the HW just ends up masking off those extra bits hence DMA errors.
Changes since V2 :
- dim checkpatch error solved
Changes since V1 :
- Added more details to commit message - Matthew Auld
Signed-off-by: Tejas Upadhyay <tejaskumarx.surendrakumar.upadhyay@intel.com>
Acked-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210708071222.955455-1-tejaskumarx.surendrakumar.upadhyay@intel.com
|
|
d3_entered flag is used to mark for vgpu_reset a previous power
transition from D3->D0, typically for VM resume from S3, so that gvt
could skip PPGTT invalidation in current vgpu_reset during resuming.
In case S0ix exit, although there is D3->D0, guest driver continue to
use vgpu as normal, with d3_entered set, until next shutdown/reboot or
power transition.
If a reboot follows a S0ix exit, device power state transite as:
D0->D3->D0->D0(reboot), while system power state transites as:
S0->S0 (reboot). There is no vgpu_reset until D0(reboot), thus
d3_entered won't be cleared, the vgpu_reset will skip PPGTT invalidation
however those PPGTT entries are no longer valid. Err appears like:
gvt: vgpu 2: vfio_pin_pages failed for gfn 0xxxxx, ret -22
gvt: vgpu 2: fail: spt xxxx guest entry 0xxxxx type 2
gvt: vgpu 2: fail: shadow page xxxx guest entry 0xxxxx type 2.
Give gvt a chance to clear d3_entered on elsp cmd submission so that the
states before & after S0ix enter/exit are consistent.
Fixes: ba25d977571e ("drm/i915/gvt: Do not destroy ppgtt_mm during vGPU D3->D0.")
Reviewed-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Colin Xu <colin.xu@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20210707004531.4873-1-colin.xu@intel.com
|
|
Now that all the codebase is converted to the new *VER macros, remove
the old GEN ones.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707181325.2130821-4-lucas.demarchi@intel.com
|
|
Commit 161058fb899e ("drm/i915: Add remaining conversions to GRAPHICS_VER")
did the last conversions to the new macros for version checks, but left
one instance behind and some other changes sneaked in to use INTEL_GEN.
Remove the last users so we can remove the macros.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707181325.2130821-3-lucas.demarchi@intel.com
|
|
Commit c816723b6b8a ("drm/i915/gt: replace IS_GEN and friends with
GRAPHICS_VER") converted INTEL_GEN and friends to the new version check
macros. Meanwhile, some changes sneaked in to use INTEL_GEN. Remove the
last users so we can remove the macros.
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210707181325.2130821-2-lucas.demarchi@intel.com
|
|
Earlier HDCP over MST support was added for TGL Platform.
Extending it to all future platfroms.
v2:
- Remove the platform check and commit log changes. [Jani]
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210705122208.25618-1-anshuman.gupta@intel.com
|
|
If mock_region_create fails then mem will be an error pointer. Instead
we just need to use the correct ordering for the onion unwind.
igt_mock_reserve() error: 'mem' dereferencing possible ERR_PTR()
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702104642.1189978-2-matthew.auld@intel.com
|
|
The block here can't be NULL, especially since we already dereferenced
it earlier, so remove the redundant check.
igt_check_blocks() warn: variable dereferenced before check 'block' (see line 126)
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Ramalingam C <ramalingam.c@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702104642.1189978-1-matthew.auld@intel.com
|
|
Remove all references to DRM's IRQ midlayer. i915 uses Linux' interrupt
functions directly.
v2:
* also remove an outdated comment
* move IRQ fix into separate patch
* update Fixes tag (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b318b82455bd ("drm/i915: Nuke drm_driver irq vfuncs")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701173618.10718-3-tzimmermann@suse.de
(cherry picked from commit 91b96f0008a2d66d76b525556e4818f5a4a089e4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
The code in xcs_resume() probably didn't work as intended. It uses
struct drm_device.irq, which is allocated to 0, but never initialized
by i915 to the device's interrupt number.
Change all calls to synchronize_hardirq() to intel_synchronize_irq(),
which uses the correct interrupt. _hardirq() functions are not needed
in this context.
v5:
* go back to _hardirq() after PCI probe reported wrong
context; add rsp comment
v4:
* switch everything to intel_synchronize_irq() (Daniel)
v3:
* also use intel_synchronize_hardirq() at another callsite
v2:
* wrap irq code in intel_synchronize_hardirq() (Ville)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 536f77b1caa0 ("drm/i915/gt: Call stop_ring() from ring resume, again")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701173618.10718-2-tzimmermann@suse.de
(cherry picked from commit 27e4b467d94e216b365da388358c9407af818662)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
_DG1_DPCLKA0_CFGCR0 maps between DPLL 0 and 1 with one bit for phy A
and B while _DG1_DPCLKA1_CFGCR0 maps between DPLL 2 and 3 with one
bit for phy C and D.
Reusing _cnl_ddi_get_pll() don't take that into cosideration returing
DPLL 0 and 1 for phy C and D.
That is a regression introduced in the refactor done in
commit 351221ffc5e5 ("drm/i915: Move DDI clock readout to
encoder->get_config()").
While at it also dropping the macros previously used, not reusing it
to improve readability.
BSpec: 50286
Fixes: 351221ffc5e5 ("drm/i915: Move DDI clock readout to encoder->get_config()")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630210522.162674-1-jose.souza@intel.com
(cherry picked from commit 3352d86dcd3336a117630f0c1cfbc6bb8c93e1cf)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
intel_dp_vsc_sdp_unpack() was using a memset() size (36, struct dp_sdp)
larger than the destination (24, struct drm_dp_vsc_sdp), clobbering
fields in struct intel_crtc_state after infoframes.vsc. Use the actual
target size for the memset().
Fixes: 1b404b7dbb10 ("drm/i915/dp: Read out DP SDPs")
Cc: stable@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210617213301.1824728-1-keescook@chromium.org
(cherry picked from commit c88e2647c5bb45d04dc4302018ebe6ebbf331823)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
|
|
We're not consistently recommending these for developers only.
I stumbled over this due to DRM_I915_LOW_LEVEL_TRACEPOINTS, which was
added in
commit 354d036fcf70654cff2e2cbdda54a835d219b9d2
Author: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Date: Tue Feb 21 11:01:42 2017 +0000
drm/i915/tracepoints: Add request submit and execute tracepoints
to "alleviate the performance impact concerns."
Which is nonsense.
Tvrtko and Joonas pointed out on irc that the real (but undocumented
reason) was stable abi concerns for tracepoints, see
https://lwn.net/Articles/705270/
and the specific change that was blocked around tracepoints:
https://lwn.net/Articles/442113/
Anyway to make it a notch clearer why we have this Kconfig option
consistly add the "Recommended for driver developers only." to it and
all the other debug options we have.
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210702201708.2075793-1-daniel.vetter@ffwll.ch
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core changes from Greg KH:
"Here is the small set of driver core and debugfs updates for 5.14-rc1.
Included in here are:
- debugfs api cleanups (touched some drivers)
- devres updates
- tiny driver core updates and tweaks
Nothing major in here at all, and all have been in linux-next for a
while with no reported issues"
* tag 'driver-core-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (27 commits)
docs: ABI: testing: sysfs-firmware-memmap: add some memmap types.
devres: Enable trace events
devres: No need to call remove_nodes() when there none present
devres: Use list_for_each_safe_from() in remove_nodes()
devres: Make locking straight forward in release_nodes()
kernfs: move revalidate to be near lookup
drivers/base: Constify static attribute_group structs
firmware_loader: remove unneeded 'comma' macro
devcoredump: remove contact information
driver core: Drop helper devm_platform_ioremap_resource_wc()
component: Rename 'dev' to 'parent'
component: Drop 'dev' argument to component_match_realloc()
device property: Don't check for NULL twice in the loops
driver core: auxiliary bus: Fix typo in the docs
drivers/base/node.c: make CACHE_ATTR define static DEVICE_ATTR_RO
debugfs: remove return value of debugfs_create_ulong()
debugfs: remove return value of debugfs_create_bool()
scsi: snic: debugfs: remove local storage of debugfs files
b43: don't save dentries for debugfs
b43legacy: don't save dentries for debugfs
...
|
|
Pull VFIO updates from Alex Williamson:
- Module reference fixes, structure renaming (Max Gurtovoy)
- Export and use common pci_dev_trylock() (Luis Chamberlain)
- Enable direct mdev device creation and probing by parent (Christoph
Hellwig & Jason Gunthorpe)
- Fix mdpy error path leak (Colin Ian King)
- Fix mtty list entry leak (Jason Gunthorpe)
- Enforce mtty device limit (Alex Williamson)
- Resolve concurrent vfio-pci mmap faults (Alex Williamson)
* tag 'vfio-v5.14-rc1' of git://github.com/awilliam/linux-vfio:
vfio/pci: Handle concurrent vma faults
vfio/mtty: Enforce available_instances
vfio/mtty: Delete mdev_devices_list
vfio: use the new pci_dev_trylock() helper to simplify try lock
PCI: Export pci_dev_trylock() and pci_dev_unlock()
vfio/mdpy: Fix memory leak of object mdev_state->vconfig
vfio/iommu_type1: rename vfio_group struck to vfio_iommu_group
vfio/mbochs: Convert to use vfio_register_group_dev()
vfio/mdpy: Convert to use vfio_register_group_dev()
vfio/mtty: Convert to use vfio_register_group_dev()
vfio/mdev: Allow the mdev_parent_ops to specify the device driver to bind
vfio/mdev: Remove CONFIG_VFIO_MDEV_DEVICE
driver core: Export device_driver_attach()
driver core: Don't return EPROBE_DEFER to userspace during sysfs bind
driver core: Flow the return code from ->probe() through to sysfs bind
driver core: Better distinguish probe errors in really_probe
driver core: Pull required checks into driver_probe_device()
vfio/platform: remove unneeded parent_module attribute
vfio: centralize module refcount in subsystem layer
|
|
Remove all references to DRM's IRQ midlayer. i915 uses Linux' interrupt
functions directly.
v2:
* also remove an outdated comment
* move IRQ fix into separate patch
* update Fixes tag (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: b318b82455bd ("drm/i915: Nuke drm_driver irq vfuncs")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701173618.10718-3-tzimmermann@suse.de
|
|
The code in xcs_resume() probably didn't work as intended. It uses
struct drm_device.irq, which is allocated to 0, but never initialized
by i915 to the device's interrupt number.
Change all calls to synchronize_hardirq() to intel_synchronize_irq(),
which uses the correct interrupt. _hardirq() functions are not needed
in this context.
v5:
* go back to _hardirq() after PCI probe reported wrong
context; add rsp comment
v4:
* switch everything to intel_synchronize_irq() (Daniel)
v3:
* also use intel_synchronize_hardirq() at another callsite
v2:
* wrap irq code in intel_synchronize_hardirq() (Ville)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: 536f77b1caa0 ("drm/i915/gt: Call stop_ring() from ring resume, again")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701173618.10718-2-tzimmermann@suse.de
|
|
If we hit the error path here we unconditionally call
i915_gem_stolen_remove_node, even though we only allocate the
compressed_llb on older platforms. Therefore we should first check that
we actually allocated the node before trying to remove it.
References: https://gitlab.freedesktop.org/drm/intel/-/issues/3709
Fixes: 46b2c40e0af3 ("drm/i915/fbc: Allocate llb before cfb")
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210701090326.1056452-1-matthew.auld@intel.com
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- AMD enables two more GPUs, with resulting header files
- i915 has started to move to TTM for discrete GPU and enable DG1
discrete GPU support (not by default yet)
- new HyperV drm driver
- vmwgfx adds arm64 support
- TTM refactoring ongoing
- 16bpc display support for AMD hw
Otherwise it's just the usual insane amounts of work all over the
place in lots of drivers and the core, as mostly summarised below:
Core:
- mark AGP ioctls as legacy
- disable force probing for non-master clients
- HDR metadata property helpers
- HDMI infoframe signal colorimetry support
- remove drm_device.pdev pointer
- remove DRM_KMS_FB_HELPER config option
- remove drm_pci_alloc/free
- drm_err_*/drm_dbg_* helpers
- use drm driver names for fbdev
- leaked DMA handle fix
- 16bpc fixed point format fourcc
- add prefetching memcpy for WC
- Documentation fixes
aperture:
- add aperture ownership helpers
dp:
- aux fixes
- downstream 0 port handling
- use extended base receiver capability DPCD
- Rename DP_PSR_SELECTIVE_UPDATE to better mach eDP spec
- mst: use khz as link rate during init
- VCPI fixes for StarTech hub
ttm:
- provide tt_shrink file via debugfs
- warn about freeing pinned BOs
- fix swapping error handling
- move page alignment into BO
- cleanup ttm_agp_backend
- add ttm_sys_manager
- don't override vm_ops
- ttm_bo_mmap removed
- make ttm_resource base of all managers
- remove VM_MIXEDMAP usage
panel:
- sysfs_emit support
- simple: runtime PM support
- simple: power up panel when reading EDID + caching
bridge:
- MHDP8546: HDCP support + DT bindings
- MHDP8546: Register DP AUX channel with userspace
- TI SN65DSI83 + SN65DSI84: add driver
- Sil8620: Fix module dependencies
- dw-hdmi: make CEC driver loading optional
- Ti-sn65dsi86: refclk fixes, subdrivers, runtime pm
- It66121: Add driver + DT bindings
- Adv7511: Support I2S IEC958 encoding
- Anx7625: fix power-on delay
- Nwi-dsi: Modesetting fixes; Cleanups
- lt6911: add missing MODULE_DEVICE_TABLE
- cdns: fix PM reference leak
hyperv:
- add new DRM driver for HyperV graphics
efifb:
- non-PCI device handling fixes
i915:
- refactor IP/device versioning
- XeLPD Display IP preperation work
- ADL-P enablement patches
- DG1 uAPI behind BROKEN
- disable mmap ioctl for discerte GPUs
- start enabling HuC loading for Gen12+
- major GuC backend rework for new platforms
- initial TTM support for Discrete GPUs
- locking rework for TTM prep
- use correct max source link rate for eDP
- %p4cc format printing
- GLK display fixes
- VLV DSI panel power fixes
- PSR2 disabled for RKL and ADL-S
- ACPI _DSM invalid access fixed
- DMC FW path abstraction
- ADL-S PCI ID update
- uAPI headers converted to kerneldoc
- initial LMEM support for DG1
- x86/gpu: add Jasperlake to gen11 early quirks
amdgpu:
- Aldebaran updates + initial SR-IOV
- new GPU: Beige Goby and Yellow Carp support
- more LTTPR display work
- Vangogh updates
- SDMA 5.x GCR fixes
- PCIe ASPM support
- Renoir TMZ enablement
- initial multiple eDP panel support
- use fdinfo to track devices/process info
- pin/unpin TTM fixes
- free resource on fence usage query
- fix fence calculation
- fix hotunplug/suspend issues
- GC/MM register access macro cleanup for SR-IOV
- W=1 fixes
- ACPI ATCS/ATIF handling rework
- 16bpc fixed point format support
- Initial smartshift support
- RV/PCO power tuning fixes
- new INFO query for additional vbios info
amdkfd:
- SR-IOV aldebaran support
- HMM SVM support
radeon:
- SMU regression fixes
- Oland flickering fix
vmwgfx:
- enable console with fbdev emulation
- fix cpu updates of coherent multisample surfaces
- remove reservation semaphore
- add initial SVGA3 support
- support arm64
msm:
- devcoredump support for display errors
- dpu/dsi: yaml bindings conversion
- mdp5: alpha/blend_mode/zpos support
- a6xx: cached coherent buffer support
- gpu iova fault improvement
- a660 support
rockchip:
- RK3036 win1 scaling support
- RK3066/3188 missing register support
- RK3036/3066/3126/3188 alpha support
mediatek:
- MT8167 HDMI support
- MT8183 DPI dual edge support
tegra:
- fixed YUV support/scaling on Tegra186+
ast:
- use pcim_iomap
- fix DP501 EDID
bochs:
- screen blanking support
etnaviv:
- export more GPU ID values to userspace
- add HWDB entry for GPU on i.MX8MP
- rework linear window calcs
exynos:
- pm runtime changes
imx:
- Annotate dma_fence critical section
- fix PRG modifiers after drmm conversion
- Add 8 pixel alignment fix for 1366x768
- fix YUV advertising
- add color properties
ingenic:
- IPU planes fix
panfrost:
- Mediatek MT8183 support + DT bindings
- export AFBC_FEATURES register to userspace
simpledrm:
- %pr for printing resources
nouveau:
- pin/unpin TTM fixes
qxl:
- unpin shadow BO
virtio:
- create dumb BOs as guest blob
vkms:
- drmm_universal_plane_alloc
- add XRGB plane composition
- overlay support"
* tag 'drm-next-2021-07-01' of git://anongit.freedesktop.org/drm/drm: (1570 commits)
drm/i915: Reinstate the mmap ioctl for some platforms
drm/i915/dsc: abstract helpers to get bigjoiner primary/secondary crtc
Revert "drm/msm/mdp5: provide dynamic bandwidth management"
drm/msm/mdp5: provide dynamic bandwidth management
drm/msm/mdp5: add perf blocks for holding fudge factors
drm/msm/mdp5: switch to standard zpos property
drm/msm/mdp5: add support for alpha/blend_mode properties
drm/msm/mdp5: use drm_plane_state for pixel blend mode
drm/msm/mdp5: use drm_plane_state for storing alpha value
drm/msm/mdp5: use drm atomic helpers to handle base drm plane state
drm/msm/dsi: do not enable PHYs when called for the slave DSI interface
drm/msm: Add debugfs to trigger shrinker
drm/msm/dpu: Avoid ABBA deadlock between IRQ modules
drm/msm: devcoredump iommu fault support
iommu/arm-smmu-qcom: Add stall support
drm/msm: Improve the a6xx page fault handler
iommu/arm-smmu-qcom: Add an adreno-smmu-priv callback to get pagefault info
iommu/arm-smmu: Add support for driver IOMMU fault handlers
drm/msm: export hangcheck_period in debugfs
drm/msm/a6xx: add support for Adreno 660 GPU
...
|
|
_DG1_DPCLKA0_CFGCR0 maps between DPLL 0 and 1 with one bit for phy A
and B while _DG1_DPCLKA1_CFGCR0 maps between DPLL 2 and 3 with one
bit for phy C and D.
Reusing _cnl_ddi_get_pll() don't take that into cosideration returing
DPLL 0 and 1 for phy C and D.
That is a regression introduced in the refactor done in
commit 351221ffc5e5 ("drm/i915: Move DDI clock readout to
encoder->get_config()").
While at it also dropping the macros previously used, not reusing it
to improve readability.
BSpec: 50286
Fixes: 351221ffc5e5 ("drm/i915: Move DDI clock readout to encoder->get_config()")
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210630210522.162674-1-jose.souza@intel.com
|
|
Bring drm-intel-next closer to drm-next and drm-intel-gt-next for a more
feasible baseline for topic branches.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
|
|
Print the name of the DRM driver when taking over fbdev devices. Makes
the output to dmesg more consistent. Note that the driver name is only
used for printing a string to the kernel log. No UAPI is affected by this
change.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Nirmoy Das <nirmoy.das@amd.com>
Acked-by: Chen-Yu Tsai <wens@csie.org> # sun4i
Acked-by: Neil Armstrong <narmstrong@baylibre.com> # meson
Link: https://patchwork.freedesktop.org/patch/msgid/20210629135833.22679-1-tzimmermann@suse.de
|
|
The min_page_size is only needed for pages inserted into the GTT, and
for our paging structures we only need at most 4K bytes, so simply
ignore the min_page_size restrictions here, otherwise we might see some
severe overallocation on some devices.
v2(Thomas): add some commentary
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625103824.558481-2-matthew.auld@intel.com
|
|
For some specialised objects we might need something larger than the
regions min_page_size due to some hw restriction, and slightly more
hairy is needing something smaller with the guarantee that such objects
will never be inserted into any GTT, which is the case for the paging
structures.
This also fixes how we setup the BO page_alignment, if we later migrate
the object somewhere else. For example if the placements are {SMEM,
LMEM}, then we might get this wrong. Pushing the min_page_size behaviour
into the manager should fix this.
v2(Thomas): push the default page size behaviour into buddy_man, and let
the user override it with the page-alignment, which looks cleaner
v3: rebase on ttm sys changes
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210625103824.558481-1-matthew.auld@intel.com
|
|
Objects intended to be used as display framebuffers must reside in
LMEM for discrete. If they happen to not do that, migrate them to
LMEM before pinning.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629151203.209465-4-thomas.hellstrom@linux.intel.com
|
|
A selftest for the gem object migrate functionality. Slightly adapted
from the original by Matthew to the new interface and new fill blit
code.
v4:
- Initialize buffers and check contents after migration
(Suggested by Matthew Auld)
- Perform async migration (if implemented) in the igt_lmem_pages_migrate
test
- Test also migration to the current region.
Co-developed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> #v3
Link: https://patchwork.freedesktop.org/patch/msgid/20210629151203.209465-3-thomas.hellstrom@linux.intel.com
|
|
Introduce an interface to migrate objects between regions.
This is primarily intended to migrate objects to LMEM for display and
to SYSTEM for dma-buf, but might be reused in one form or another for
performance-based migration.
v2:
- Verify that the memory region given as an id really exists.
(Reported by Matthew Auld)
- Call i915_gem_object_{init,release}_memory_region() when switching region
to handle also switching region lists. (Reported by Matthew Auld)
v3:
- Fix i915_gem_object_can_migrate() to return true if object is already in
the correct region, even if the object ops doesn't have a migrate()
callback.
- Update typo in commit message.
- Fix kerneldoc of i915_gem_object_wait_migration().
v4:
- Improve documentation (Suggested by Mattew Auld and Michael Ruhl)
- Always assume TTM migration hits a TTM move and unsets the pages through
move_notify. (Reported by Matthew Auld)
- Add a dma_fence_might_wait() annotation to
i915_gem_object_wait_migration() (Suggested by Daniel Vetter)
v5:
- Re-add might_sleep() instead of __dma_fence_might_wait(), Sent
v4 with the wrong version, didn't compile and __dma_fence_might_wait()
is not exported.
- Added an R-B.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210629151203.209465-2-thomas.hellstrom@linux.intel.com
|
|
While reading the SDP infoframe, we are getting filtered with
the encoder type INTEL_OUTPUT_DDI which causes the infoframe
mismatch. This patch will drop encoder->type check as we can
mask individual infoframe type.
[1025.606556] i915 0000:00:02.0: [drm] *ERROR* mismatch in drm infoframe
[1025.607865] i915 0000:00:02.0: [drm] *ERROR* expected:
[1025.607879] i915 0000:00:02.0: HDMI infoframe: Dynamic Range and Mastering, version 1, length 26
[1025.607889] i915 0000:00:02.0: length: 26
[1025.607898] i915 0000:00:02.0: metadata type: 0
[1025.608292] i915 0000:00:02.0: eotf: 2
[1025.608302] i915 0000:00:02.0: x[0]: 35400
[1025.608312] i915 0000:00:02.0: y[0]: 14599
[1025.609115] i915 0000:00:02.0: x[1]: 8500
[1025.609947] i915 0000:00:02.0: y[1]: 39850
[1025.609959] i915 0000:00:02.0: x[2]: 6550
[1025.609970] i915 0000:00:02.0: y[2]: 2300
[1025.609980] i915 0000:00:02.0: white point x: 15634
[1025.609989] i915 0000:00:02.0: white point y: 16450
[1025.610381] i915 0000:00:02.0: max_display_mastering_luminance: 1000
[1025.610392] i915 0000:00:02.0: min_display_mastering_luminance: 500
[1025.610401] i915 0000:00:02.0: max_cll: 500
[1025.610816] i915 0000:00:02.0: max_fall: 1000
[1025.612457] i915 0000:00:02.0: [drm] *ERROR* found:
[1025.614354] ------------[ cut here ]------------
[1025.616244] pipe state doesn't match!
[1025.617640] WARNING: CPU: 6 PID: 2114 at drivers/gpu/drm/i915/display/intel_display.c:9332 intel_atomic_commit_tail+0x14d4/0x17c0 [i915]
V2:
* Drop encoder->type check
V3:
* Remove internal reviews
Cc: Uma Shankar <uma.shankar@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Bhanuprakash Modem <bhanuprakash.modem@intel.com>
Reviewed-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423141609.28568-1-bhanuprakash.modem@intel.com
|
|
vma_lookup() will look up the vma at a specific address. find_vma() will
start the search for a specific address and continue upwards. This fixes
an issue with the selftest as the returned vma may not be the newly
created vma, but simply the vma at a higher address.
objects
Link: https://lkml.kernel.org/r/20210521174745.2219620-3-Liam.Howlett@Oracle.com
Fixes: 6fedafacae1b (drm/i915/selftests: Wrap vm_mmap() around GEM
Signed-off-by: Liam R. Howlett <Liam.Howlett@Oracle.com>
Reviewed-by: Laurent Dufour <ldufour@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
