summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915
AgeCommit message (Collapse)AuthorFilesLines
2020-07-06Revert "drm/i915/dp: Correctly advertise HBR3 for GEN11+"Matt Atwood1-11/+17
The initial CI results did not include a TGL system which includes a panel that is having issues with patch. Revert while we triage. This reverts commit 680c45c767f63e35f063d3ea04f388a9f7ae7079. Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702230957.30536-1-matthew.s.atwood@intel.com
2020-07-03drm/i915: Export ppgtt_bind_vmaChris Wilson8-60/+58
Reuse the ppgtt_bind_vma() for aliasing_ppgtt_bind_vma() so we can reduce some code near-duplication. The catch is that we need to then pass along the i915_address_space and not rely on vma->vm, as they differ with the aliasing-ppgtt. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200703102519.26539-1-chris@chris-wilson.co.uk
2020-07-03drm/i915/fbc: Allow FBC to recompress after a 3D workload on i85x/i865Ville Syrjälä2-0/+11
Normally i85x/i865 3D activity will block FBC until a 2D blit occurs. I suppose this was meant to avoid recompression while 3D activity is still going on but the frame hasn't yet been presented. Unfortunately that also means that a page flipped 3D workload will permanently block FBC even if it only renders a single frame and then does nothing. Since we are using software render tracking anyway we might as well flip the chicken bit so that 3D does not block FBC. This will avoid the permament FBC blockage in the aforemention use case, but thanks to the software tracking the compressor will not disturb 3D rendering activity. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-5-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-03drm/i915/fbc: Enable fbc on i865Ville Syrjälä2-1/+3
Unlike all the other pre-snb desktop platforms i865 actually supports FBC. Let's enable it. Quote from the spec: "DevSDG provides the same Run-Length Encoded Frame Buffer Compression (RLEFBC) function as exists in DevMGM." As i865 only has the one pipe we want to skip massaging the plane<->pipe assignment aimed at getting FBC+LVDS working on the mobile platforms. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-4-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-03drm/i915/fbc: Fix nuke for pre-snb platformsVille Syrjälä1-1/+33
The MSG_FBC_REND_STATE register only exists on snb+. For older platforms (would also work for snb+) we can simply rewite DSPSURF to trigger a flip nuke. While generally RMW is considered harmful we'll use it here for simplicity. And since FBC doesn't exist in i830 we don't have to worry about the DSPSURF double buffering hardware fails present on that platform. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-3-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-03drm/i915/fbc: Use the correct plane strideVille Syrjälä1-6/+10
Consult the actual plane stride instead of the fb stride. The two will disagree when we remap the gtt. The plane stride is what the hw will be fed so that's what we should look at for the FBC retrictions/cfb allocation. Since we no longer require a fence we are going to attempt using FBC with remapping, and so we should look at correct stride. With 90/270 degree rotation the plane stride is stored in units of pixels, so we need to conver it to bytes for the purposes of calculating the cfb stride. Not entirely sure if this matches the hw behaviour though. Need to reverse engineer that at some point... We also need to reorder the pixel format check vs. stride check to avoid triggering a spurious WARN(stride & 63) with cpp==1 and plane stride==32. v2: Try to deal with rotated stride and related WARN Cc: José Roberto de Souza <jose.souza@intel.com> Fixes: 691f7ba58d52 ("drm/i915/display/fbc: Make fences a nice-to-have for GEN9+") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702153723.24327-2-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-03drm/i915/tgl: Clamp min_cdclk to max_cdclk_freq to unblock 8KStanislav Lisovskiy1-2/+9
We still need "Bump up CDCLK" workaround otherwise getting underruns - however currently it blocks 8K as CDCLK = Pixel rate, in 8K case would require CDCLK to be around 1 Ghz which is not possible. v2: - Convert to expression(max(min_cdclk, min(pixel_rate, max_cdclk)) (Ville Syrjälä) - Use type specific min_t, max_t(Ville Syrjälä) Fixes: 46d53e271cea ("Revert "drm/i915: Remove unneeded hack now for CDCLK"") Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Reviewed-by: Manasi Navare <manasi.d.navare@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702091526.10096-1-stanislav.lisovskiy@intel.com
2020-07-03drm/i915/guc: Expand guc_info debugfs with more informationMichał Winiarski1-7/+16
The information about platform/driver/user view of GuC firmware usage currently requires user to either go through kernel log or parse the combination of "enable_guc" modparam and various debugfs entries. Let's keep things simple and add a "supported/used/wanted" matrix (already used internally by i915) in guc_info debugfs. Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Lukasz Fiedorowicz <lukasz.fiedorowicz@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200701142752.419878-1-michal@hardline.pl
2020-07-03drm/i915: do not read swizzle info if unavailableLucas De Marchi1-5/+9
Since gen8 we don't use swizzle anymore. Don't dump registers related to it: registers may or may not be there. v2: pull the rest of driver state reporting before the read out (Chris) Cc: Matt Roper <matthew.d.roper@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20200702200714.1278-1-lucas.demarchi@intel.com
2020-07-03drm/i915/gem: Split the context's obj:vma lut into its own mutexChris Wilson5-13/+26
Rather than reuse the common ctx->mutex for locking the execbuffer LUT, split it into its own lock to avoid being taken [as part of ctx->mutex] at inappropriate times. In particular to avoid the inversion from taking the timeline->mutex for the whole execbuf submission in the next patch. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200703004306.11117-1-chris@chris-wilson.co.uk
2020-07-03drm/i915: Also drop vm.ref along error paths for vma constructionChris Wilson1-10/+6
Not only do we need to release the vm.ref we acquired for the vma on the duplicate insert branch, but also for the normal error paths, so roll them all into one. Reported-by: Andi Shyti <andi.shyti@intel.com> Suggested-by: Andi Shyti <andi.shyti@intel.com> Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Andi Shyti <andi.shyti@intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702211015.29604-1-chris@chris-wilson.co.uk
2020-07-03drm/i915/gem: Drop forced struct_mutex from shrinker_taints_mutexChris Wilson1-11/+0
Since we no longer always take struct_mutex around everything, and want the freedom to create GEM objects, actually taking struct_mutex inside the lock creation ends up pulling the mutex inside other looks. Since we don't use generally use struct_mutex, we can relax the tainting. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Andi Shyti <andi.shyti@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702083225.20044-3-chris@chris-wilson.co.uk
2020-07-02drm/i915/gem: Only revoke mmap handlers if activeChris Wilson3-28/+24
Avoid waking up the device and taking stale locks if we know that the object is not currently mmapped. This is particularly useful as not many object are actually mmapped and so we can destroy them without waking the device up, and gives us a little more freedom of workqueue ordering during shutdown. v2: Pull the release_mmap() into its single user in freeing the objects, where there can not be any race with a concurrent user of the freed object. Or so one hopes! Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>, Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>, Link: https://patchwork.freedesktop.org/patch/msgid/20200702163623.6402-2-chris@chris-wilson.co.uk
2020-07-02drm/i915/gem: Only revoke the GGTT mmappings on aperture detiling changesChris Wilson3-3/+6
Only a GGTT mmapping will use the aperture detiling registers, so on a tiling change for an object, we only need to revoke those mmappings and not the CPU mmappings (which are always linear irrespective of the tiling). Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702163623.6402-1-chris@chris-wilson.co.uk
2020-07-02drm/i915/display: prefer dig_port to reference intel_digital_portLucas De Marchi18-536/+533
We have a mix of dport, intel_dport, intel_dig_port and dig_port to reference a intel_digital_port struct. Numbers are around 5 intel_dport 36 dport 479 intel_dig_port 352 dig_port Since we already removed the intel_ prefix from most of our other structs, do the same here and prefer dig_port. v2: rename everything in i915, not just a few display sources and reword commit message (from Matt Roper) Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701045054.23357-1-lucas.demarchi@intel.com
2020-07-02drm/i915: Update DRIVER_DATE to 20200702Jani Nikula1-2/+2
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-07-02drm/i915: Drop vm.ref for duplicate vma on constructionChris Wilson1-0/+1
As we allow for parallel threads to create the same vma instance concurrently, and we only filter out the duplicates upon reacquiring the spinlock for the rbtree, we have to free the loser of the constructors' race. When freeing, we should also drop any resource references acquired for the redundant vma. Fixes: 2850748ef876 ("drm/i915: Pull i915_vma_pin under the vm->mutex") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: <stable@vger.kernel.org> # v5.5+ Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702083225.20044-1-chris@chris-wilson.co.uk
2020-07-02drm/i915/gt: Move the heartbeat into the high priority system wqChris Wilson1-1/+1
As we ensure that the heartbeat is reasonably fast (and should not block), move the heartbeat work into the system_highpri_wq to avoid having this essential task be blocked behind other slow work, such as our own retire_work_handler. References: https://gitlab.freedesktop.org/drm/intel/-/issues/2119 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702095219.963-2-chris@chris-wilson.co.uk
2020-07-02drm/i915/gt: Harden the heartbeat against a stuck driverChris Wilson2-2/+13
If the driver gets stuck holding the kernel timeline, we cannot issue a heartbeat and so fail to discover that the driver is indeed stuck and do not issue a GPU reset (which would hopefully unstick the driver!). Switch to using a trylock so that we can query if the heartbeat's timeline mutex is locked elsewhere, and then use the timer to probe if it remains stuck at the same spot for consecutive heartbeats, indicating that the mutex has not been released and the engine has not progressed. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200702095219.963-1-chris@chris-wilson.co.uk
2020-07-02drm/i915: Fix the old vs. new epoch counter check during hotplug detectImre Deak1-1/+3
The old epoch counter was left uninited, so the function returned a changed state always. While at it debug print the old epoch counter as well. Fixes: 35205ee9ba46 ("drm/i915: Send hotplug event if edid had changed") Cc: Kunal Joshi <kunal1.joshi@intel.com> Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701180001.15857-1-imre.deak@intel.com
2020-07-02drm/i915/dp: Correctly advertise HBR3 for GEN11+Matt Atwood1-17/+11
intel_dp_set_source_rates() calls intel_dp_is_edp(), which is unsafe to use before encoder_type is set. This caused GEN11+ to incorrectly strip HBR3 from source rates for edp. Move intel_dp_set_source_rates() to after encoder_type is set. Add comment to intel_dp_is_edp() describing unsafe usages. v2: Alter intel_dp_set_source_rates final position (Ville/Manasi). Remove outdated comment (Ville). Slight optimization of control flow in intel_dp_init_connector. Slight rewording in commit message. Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630233310.10191-1-matthew.s.atwood@intel.com
2020-07-01drm/i915: Fix g4x fbc watermark enableVille Syrjälä1-12/+21
'level' here means the highest level we can't use, so when checking the fbc watermarks we need a -1 to get at the last enabled level. While at if refactor the code a bit to declutter g4x_compute_pipe_wm(). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-12-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-07-01drm/i915/icl+: Simplify combo/TBT PLL calculation call-chainImre Deak1-37/+27
To simplify things, call the combo PHY/TBT PLL calculation functions directly from the corresponding combo/TypeC PLL get functions, instead of calling the same calculation functions after having to recheck if the given PHY is combo or TypeC. Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200629185848.20550-2-imre.deak@intel.com
2020-07-01drm/i915/tgl+: Fix TBT DPLL fractional divider for 38.4MHz ref clockImre Deak1-1/+12
When the reference clock is 38.4MHz, using the current TBT PLL fractional divider value results in a slightly off TBT link frequency. This causes an endless loop of link training success followed by a bad link signaling and retraining at least on a Dell WD19TB TBT dock. The workaround provided by the HW team is to divide the fractional divider value by two. This fixed the link training problem on the ThinkPad dock. The same workaround is needed on some EHL platforms and for combo PHY PLLs, these will be addressed in a follow-up. Bspec: 49204 References: HSDES#22010772725 References: HSDES#14011861142 Reported-and-tested-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: Khaled Almahallawy <khaled.almahallawy@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200629185848.20550-1-imre.deak@intel.com
2020-07-01drm/i915/gem: Move obj->lut_list under its own lockChris Wilson4-12/+20
The obj->lut_list is traversed when the object is closed as the file table is destroyed during process termination. As this occurs before we kill any outstanding context if, due to some bug or another, the closure is blocked, then we fail to shootdown any inflight operations potentially leaving the GPU spinning forever. As we only need to guard the list against concurrent closures and insertions, the hold is short and merits being treated as a simple spinlock. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Michael J. Ruhl <michael.j.ruhl@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200701084439.17025-1-chris@chris-wilson.co.uk
2020-07-01drm/i915/display: remove alias to dig_portLucas De Marchi1-6/+5
We don't need intel_dig_port and dig_port to refer to the same thing. Prefer the latter. v2: fix coding style Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Reviewed-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200626234834.26864-2-lucas.demarchi@intel.com
2020-07-01drm/i915: Add PSR2 selective fetch registersJosé Roberto de Souza1-5/+63
This registers will be used to implement PSR2 manual tracking/selective fetch. v2: - Fixed typo in _PLANE_SEL_FETCH_BASE - Renamed PSR2_MAN_TRK_CTL bits to better match spec names - Renamed _PLANE_SEL_FETCH_* to better match spec names BSpec: 55229 BSpec: 50424 BSpec: 50420 Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200626010151.221388-3-jose.souza@intel.com
2020-07-01drm/i915: Reorder intel_psr2_config_valid()José Roberto de Souza1-25/+25
Future patches will bring PSR2 selective fetch configuration validation but most of the configuration checks will be used for HW tracking and selective fetch so the reoder was necessary. Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200626010151.221388-2-jose.souza@intel.com
2020-07-01drm/i915: Add plane damage clips propertyJosé Roberto de Souza2-0/+8
This property will be used by PSR2 software tracking, adding it to GEN12+. Reviewed-by: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com> Signed-off-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200626010151.221388-1-jose.souza@intel.com
2020-06-30drm/i915/gem: Avoid kmalloc under i915->mm_lockChris Wilson2-68/+65
Rearrange the allocation of the mm_struct registration to avoid allocating underneath the i915->mm_lock, so that we avoid tainting the lock (and in turn many other locks that may be held as i915->mm_lock is taken, and those locks we may want on the free [shrinker] paths). In doing so, we convert the lookup to be RCU protected by courtesy of converting the free-worker to be an rcu_work. v2: Remember to use hash_rcu variants to protect the list iteration from concurrent add/del. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Matthew Auld <matthew.auld@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200619194038.5088-1-chris@chris-wilson.co.uk
2020-06-30drm/i915: Suppress spurious underruns on gen2Ville Syrjälä1-0/+4
Often we seem to detect an underrun right after modeset on gen2. It seems to be a spurious detection (potentially the pipe is still in a wonky state when we enable the planes). An extra vblank wait seems to cure it. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-13-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-06-30drm/i915/fbc: Reduce fbc1 compression interval to 1 secondVille Syrjälä1-2/+2
The default fbc1 compression interval we use is 500 frames. That translates to over 8 seconds typically. That's rather excessive so let's drop it to 1 second. The hardware will not attempt recompression unless at least one line has been modified, so a shorter compression interval should not cause extra bandwidth use in the purely idle scenario. Of course in the mostly idle case we are possibly going to recompress a bit more. Should really try to find some kind of sweet spot to minimize the energy usage... Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-11-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-06-30drm/i915/fbc: Store the fbc1 compression interval in the paramsVille Syrjälä2-7/+8
Avoid the FBC_CONTROL rmw and just store the fbc compression interval in the params/ Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-10-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-06-30drm/i915/fbc: Parametrize FBC_CONTROLVille Syrjälä2-11/+15
Parametrize the FBC_CONTROL bits for neater code. Also add the one missing bit: "stop compression on modification". Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-9-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-06-30drm/i915/fbc: Don't clear busy_bits for origin==GTTVille Syrjälä1-1/+9
The hardware host tracking won't nuke the entire cfb (unless the entire fb is written through the gtt) so don't clear the busy_bits for gtt tracking. Not that it really matters anymore since we've lost ORIGIN_GTT usage everywhere. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-7-ville.syrjala@linux.intel.com Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
2020-06-30drm/i915/fbc: Fix fence_y_offset handlingVille Syrjälä4-25/+25
The current fence_y_offset calculation is broken. I think it more or less used to do the right thing, but then I changed the plane code to put the final x/y source offsets back into the src rectangle so now it's just subtraacting the same value from itself. The code would never have worked if we allowed the framebuffer to have a non-zero offset. Let's do this in a better way by just calculating the fence_y_offset from the final plane surface offset. Note that we don't align the plane surface address to fence rows so with horizontal panning there's often a horizontal offset from the fence start to the surface address as well. We have no way to tell the hardware about that so we just ignore it. Based on some quick tests the invlidation still happens correctly. I presume due to the invalidation nuking at least the full line (or a segment of multiple lines). Fixes: 54d4d719fa11 ("drm/i915: Overcome display engine stride limits via GTT remapping") Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200429101034.8208-4-ville.syrjala@linux.intel.com Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
2020-06-30drm/i915: Skip stale object handle for debugfs per-file-statsChris Wilson1-1/+1
As we close a handle GEM object, we update the drm_file's idr with an error^W NULL pointer to indicate the in-progress closure, and finally removing it. If we read the idr directly, we may then see an invalid object pointer, and in our debugfs per_file_stats() we therefore need to protect against the entry being invalid. [ 1016.651637] RIP: 0010:per_file_stats+0xe/0x16e [ 1016.651646] Code: d2 41 0f b6 8e 69 8c 00 00 48 89 df 48 c7 c6 7b 74 8c be 31 c0 e8 0c 89 cf ff eb d2 0f 1f 44 00 00 55 48 89 e5 41 57 41 56 53 <8b> 06 85 c0 0f 84 4d 01 00 00 49 89 d6 48 89 f3 3d ff ff ff 7f 73 [ 1016.651651] RSP: 0018:ffffad3a01337ba0 EFLAGS: 00010293 [ 1016.651656] RAX: 0000000000000018 RBX: ffff96fe040d65e0 RCX: 0000000000000002 [ 1016.651660] RDX: ffffad3a01337c50 RSI: 0000000000000000 RDI: 00000000000001e8 [ 1016.651663] RBP: ffffad3a01337bb8 R08: 0000000000000000 R09: 00000000000001c0 [ 1016.651667] R10: 0000000000000000 R11: ffffffffbdbe5fce R12: 0000000000000000 [ 1016.651671] R13: ffffffffbdbe5fce R14: ffffad3a01337c50 R15: 0000000000000001 [ 1016.651676] FS: 00007a597e2d7480(0000) GS:ffff96ff3bb00000(0000) knlGS:0000000000000000 [ 1016.651680] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1016.651683] CR2: 0000000000000000 CR3: 0000000171fc2001 CR4: 00000000003606e0 [ 1016.651687] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1016.651690] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1016.651693] Call Trace: [ 1016.651693] Call Trace: [ 1016.651703] idr_for_each+0x8a/0xe8 [ 1016.651711] i915_gem_object_info+0x2a3/0x3eb [ 1016.651720] seq_read+0x162/0x3ca [ 1016.651727] full_proxy_read+0x5b/0x8d [ 1016.651733] __vfs_read+0x45/0x1bb [ 1016.651741] vfs_read+0xc9/0x15e [ 1016.651746] ksys_read+0x7e/0xde [ 1016.651752] do_syscall_64+0x54/0x68 [ 1016.651758] entry_SYSCALL_64_after_hwframe+0x44/0xa9 Reported-by: Guenter Roeck <linux@roeck-us.net> Fixes: a8c15954d64a ("drm/i915: Protect debugfs per_file_stats with RCU lock") Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630152724.3734-1-chris@chris-wilson.co.uk
2020-06-30drm/i915: Send hotplug event if edid had changedStanislav Lisovskiy1-10/+14
Added epoch counter checking to intel_encoder_hotplug in order to be able process all the connector changes, besides connection status. Also now any change in connector would result in epoch counter change, so no multiple checks are needed. v2: Renamed change counter to epoch counter. Fixed type name. v3: Fixed rebase conflict v4: Remove duplicate drm_edid_equal checks from hdmi and dp, lets use only once edid property is getting updated and increment epoch counter from there. Also lets now call drm_connector_update_edid_property right after we get edid always to make sure there is a unified way to handle edid change, without having to change tons of source code as currently drm_connector_update_edid_property is called only in certain cases like reprobing and not right after edid is actually updated. v5: Fixed const modifiers, removed blank line v6: Removed drm specific part from this patch, leaving only i915 specific changes here. Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200630002700.5451-4-kunal1.joshi@intel.com Acked-by: Jani Nikula <jani.nikula@intel.com>
2020-06-30drm/i915/display: fix missing null check on allocated dsb objectColin Ian King1-0/+4
Currently there is no null check for a failed memory allocation on the dsb object and without this a null pointer dereference error can occur. Fix this by adding a null check. Note: added a drm_err message in keeping with the error message style in the function. Addresses-Coverity: ("Dereference null return") Fixes: afeda4f3b1c8 ("drm/i915/dsb: Pre allocate and late cleanup of cmd buffer") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200616114221.73971-1-colin.king@canonical.com
2020-06-30iommu/vt-d: Use dev_iommu_priv_get/set()Joerg Roedel1-2/+8
Remove the use of dev->archdata.iommu and use the private per-device pointer provided by IOMMU core code instead. Signed-off-by: Joerg Roedel <jroedel@suse.de> Reviewed-by: Jerry Snitselaar <jsnitsel@redhat.com> Reviewed-by: Lu Baolu <baolu.lu@linux.intel.com> Link: https://lore.kernel.org/r/20200625130836.1916-3-joro@8bytes.org
2020-06-30drm/i915: fix a couple of spelling mistakes in kernel parameter help textColin Ian King1-2/+2
There are a couple of spelling mistakes in kernel parameter help text, namely "helpfull" and "paramters". Fix them. Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200616082129.65517-1-colin.king@canonical.com
2020-06-30drm/i915: HDCP: retry link integrity check on failureOliver Barta1-3/+16
A single Ri mismatch doesn't automatically mean that the link integrity is broken. Update and check of Ri and Ri' are done asynchronously. In case an update happens just between the read of Ri' and the check against Ri there will be a mismatch even if the link integrity is fine otherwise. Signed-off-by: Oliver Barta <oliver.barta@aptiv.com> Reviewed-by: Sean Paul <sean@poorly.run> Reviewed-by: Ramalingam C <ramalingam.c@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200504123524.7731-1-oliver.barta@aptiv.com
2020-06-29drm/i915: Clamp linetime wm to <64usecVille Syrjälä1-6/+12
The linetime watermark is a 9 bit value, which gives us a maximum linetime of just below 64 usec. If the linetime exceeds that value we currently just discard the high bits and program the rest into the register, which angers the state checker. To avoid that let's just clamp the value to the max. I believe it should be perfectly fine to program a smaller linetime wm than strictly required, just means the hardware may fetch data sooner than strictly needed. We are further reassured by the fact that with DRRS the spec tells us to program the smaller of the two linetimes corresponding to the two refresh rates. Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200625200003.12436-1-ville.syrjala@linux.intel.com Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
2020-06-29drm/i915: Include asm sources for {ivb, hsw}_clear_kernel.cRodrigo Vivi3-0/+282
Alexandre Oliva has recently removed these files from Linux Libre with concerns that the sources weren't available. The sources are available on IGT repository, and only open source tools are used to generate the {ivb,hsw}_clear_kernel.c files. However, the remaining concern from Alexandre Oliva was around GPL license and the source not been present when distributing the code. So, it looks like 2 alternatives are possible, the use of linux-firmware.git repository to store the blob or making sure that the source is also present in our tree. Since the goal is to limit the i915 firmware to only the micro-controller blobs let's make sure that we do include the asm sources here in our tree. Btw, I tried to have some diligence here and make sure that the asms that these commits are adding are truly the source for the mentioned files: igt$ ./scripts/generate_clear_kernel.sh -g ivb \ -m ~/mesa/build/src/intel/tools/i965_asm Output file not specified - using default file "ivb-cb_assembled" Generating gen7 CB Kernel assembled file "ivb_clear_kernel.c" for i915 driver... igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/ivb_clear_kernel.c \ ivb_clear_kernel.c < * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:29:32 AM UTC > * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:00:54 AM PDT 61c61 < }; > }; \ No newline at end of file igt$ ./scripts/generate_clear_kernel.sh -g hsw \ -m ~/mesa/build/src/intel/tools/i965_asm Output file not specified - using default file "hsw-cb_assembled" Generating gen7.5 CB Kernel assembled file "hsw_clear_kernel.c" for i915 driver... igt$ diff ~/i915/drm-tip/drivers/gpu/drm/i915/gt/hsw_clear_kernel.c \ hsw_clear_kernel.c 5c5 < * Generated by: IGT Gpu Tools on Fri 21 Feb 2020 05:30:13 AM UTC > * Generated by: IGT Gpu Tools on Mon 08 Jun 2020 10:01:42 AM PDT 61c61 < }; > }; \ No newline at end of file Used IGT and Mesa master repositories from Fri Jun 5 2020) IGT: 53e8c878a6fb ("tests/kms_chamelium: Force reprobe after replugging the connector") Mesa: 5d13c7477eb1 ("radv: set keep_statistic_info with RADV_DEBUG=shaderstats") Mesa built with: meson build -D platforms=drm,x11 -D dri-drivers=i965 \ -D gallium-drivers=iris -D prefix=/usr \ -D libdir=/usr/lib64/ -Dtools=intel \ -Dkulkan-drivers=intel && ninja -C build v2: Header clean-up and include build instructions in a readme (Chris) Modified commit message to respect check-patch Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003374.html Reference: http://www.fsfla.org/pipermail/linux-libre/2020-June/003375.html Fixes: 47f8253d2b89 ("drm/i915/gen7: Clear all EU/L3 residual contexts") Cc: <stable@vger.kernel.org> # v5.7+ Cc: Alexandre Oliva <lxoliva@fsfla.org> Cc: Prathap Kumar Valsan <prathap.kumar.valsan@intel.com> Cc: Akeem G Abodunrin <akeem.g.abodunrin@intel.com> Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Jon Bloomfield <jon.bloomfield@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200610201807.191440-1-rodrigo.vivi@intel.com (cherry picked from commit 5a7eeb8ba143d860050ecea924a8f074f02d8023) Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-06-27drm/i915/gen12: implement Wa_14011508470Matt Atwood2-0/+14
Update code to reflect recent bspec changes Bspec: 52890 Bspec: 53508 Signed-off-by: Matt Atwood <matthew.s.atwood@intel.com> Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com> Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200624215723.2316-1-matthew.s.atwood@intel.com
2020-06-26drm/i915: Extend Wa_14010685332 to all ICP+ PCH'sMatt Roper1-4/+2
This workaround now also applies to TGL and RKL, so extend the PCH test to just capture everthing ICP and beyond. Signed-off-by: Matt Roper <matthew.d.roper@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200617180006.4130501-1-matthew.d.roper@intel.com Reviewed-by: Matt Atwood <matthew.s.atwood@intel.com>
2020-06-26drm/i915: Fix DP_TRAIN_MAX_{PRE_EMPHASIS,SWING}_REACHED handlingVille Syrjälä1-2/+3
The DP spec says: "The transmitter shall support at least three levels of voltage swing (Levels 0, 1, and 2). If only three levels of voltage swing are supported (VOLTAGE SWING SET field (bits 1:0) are programmed to 10 (Level 2)), this bit shall be set to 1, and cleared in all other cases. If all four levels of voltage swing are supported (VOLTAGE SWING SET field (bits 1:0) are programmed to 11 (Level 3)), this bit shall be set to 1,and cleared in all other cases." Let's follow that exactly instead of the current apporach where we can set those also for vswing/preemph levels 0 or 1 (or 2 when the platform max is 3). Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200512174145.3186-7-ville.syrjala@linux.intel.com Reviewed-by: Imre Deak <imre.deak@intel.com>
2020-06-25Merge drm/drm-next into drm-intel-next-queuedJani Nikula31-197/+242
Catch up with upstream, in particular to get c1e8d7c6a7a6 ("mmap locking API: convert mmap_sem comments"). Signed-off-by: Jani Nikula <jani.nikula@intel.com>
2020-06-24drm/i915/dp_mst: Enable VC payload allocation after transcoder is enabledImre Deak2-5/+11
The spec requires enabling the MST Virtual Channel payload allocation - in a separate step - after the transcoder is enabled, follow this. Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Cc: José Roberto de Souza <jose.souza@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Reviewed-by: José Roberto de Souza <jose.souza@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20200623082411.3889-1-imre.deak@intel.com
2020-06-24Merge tag 'drm-misc-next-2020-06-19' of ↵Dave Airlie7-15/+47
git://anongit.freedesktop.org/drm/drm-misc into drm-next drm-misc-next for v5.9: UAPI Changes: - Add DRM_MODE_TYPE_USERDEF for video modes specified in cmdline. Cross-subsystem Changes: - Assorted devicetree binding updates. - Add might_sleep() to dma_fence_wait(). - Fix fbdev's get_user_pages_fast() handling, and use pin_user_pages. - Small cleanup with IS_BUILTIN in video/fbdev drivers. - Fix video/hdmi coding style for infoframe size. Core Changes: - Silence vblank output during init. - Fix DP-MST corruption during send msg timeout. - Clear leak in drm_gem_objecs_lookup(). - Make newlines work with force connector attribute. - Fix module refcounting error in drm_encoder_slave, and use new i2c api. - Header fix for drm_managed.c - More struct_mutex removal for !legacy drivers: - Remove gem_free_object() - Removal of drm_gem_object_put_unlocked(). - Show current->comm alongside pid in debug printfs. - Add drm_client_modeset_check() + drm_client_framebuffer_flush(). - Replace drm_fb_swab16 with drm_fb_swap that also supports 32-bits. - Remove mode->vrefresh, and compactify drm_display_mode. - Use drm_* macros for logging and warnings. - Add WARN when drm_gem_get_pages is used on a private obj. - Handle importing and imported dmabuf better in shmem helpers. - Small fix for drm/mm hole size comparison, and remove invalid entry optimization. - Add a drm/mm selftest. - Set DSI connector type for DSI panels. - Assorted small fixes and documentation updates. - Fix DDI I2C device registration for MST ports, and flushing on destroy. - Fix master_set return type, used by vmwgfx. - Make the drm_set/drop_master ioctl symmetrical. Driver Changes: Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4, i915, omap, fbdev/sm712fb, fbdev/pxafb, console/newport_con, msm, virtio, udl, malidp, hdlcd, bridge/ti-sn65dsi86, panfrost. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE Allow iommu in the sun4i driver and use it for sun8i. - Simplify backlight lookup for omap, amba-clcd and tilcdc. - Hold reg_lock for rockchip. - Add support for bridge gpio and lane reordering + polarity to ti-sn65dsi86, and fix clock choice. - Small assorted fixes to tilcdc, vc4 (multiple), i915. - Remove hw cursor support for mgag200, and use simple kms helper + shmem helpers. - Add support for KOE TX26D202VM0BWA panel. - Use GEM CMA functions in arc, arm, atmel-hlcdc, fsi-dcu, hisilicon, imx, ingenic, komeda, malidp, mcde, meson, msxfb, rcar-du, shmobile, stm, sti, tilcdc, tve200, zte. - Remove gem_print_info. - Improve gem_create_object_helper so udl can use shmem helpers. - Convert vc4 dt bindings to schemas, and add clock properties. - Device initialization cleanups for mgag200. - Add a workaround to fix DP-MST short pulses handling on broken hardware in i915. - Allow build test compiling arm drivers. - Use managed pci functions in mgag200 and ast. - Use dev_groups in malidp. - Add per pixel alpha support for PX30 VOP in rockchip. - Silence deferred probe logs in panfrost. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/001cd9a6-405d-4e29-43d8-354f53ae4e8b@linux.intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-27 05:04:24 +0300