summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_hdmi.c
AgeCommit message (Collapse)AuthorFilesLines
2017-11-24Merge tag 'drm-misc-fixes-2017-11-20' of ↵Dave Airlie1-1/+2
git://anongit.freedesktop.org/drm/drm-misc into drm-next 4.15 merge window fixes 1 * tag 'drm-misc-fixes-2017-11-20' of git://anongit.freedesktop.org/drm/drm-misc: drm/edid: Don't send non-zero YQ in AVI infoframe for HDMI 1.x sinks drm/vc4: Account for interrupts in flight
2017-11-15drm/edid: Don't send non-zero YQ in AVI infoframe for HDMI 1.x sinksVille Syrjälä1-1/+2
Apparently some sinks look at the YQ bits even when receiving RGB, and they get somehow confused when they see a non-zero YQ value. So we can't just blindly follow CEA-861-F and set YQ to match the RGB range. Unfortunately there is no good way to tell whether the sink designer claims to have read CEA-861-F. The CEA extension block revision number has generally been stuck at 3 since forever, and even a very recently manufactured sink might be based on an old design so the manufacturing date doesn't seem like something we can use. In lieu of better information let's follow CEA-861-F only for HDMI 2.0 sinks, since HDMI 2.0 is based on CEA-861-F. For HDMI 1.x sinks we'll always set YQ=0. The alternative would of course be to always set YQ=0. And if we ever encounter a HDMI 2.0+ sink with this bug that's what we'll probably have to do. Cc: stable@vger.kernel.org Cc: Jani Nikula <jani.nikula@intel.com> Cc: Eric Anholt <eric@anholt.net> Cc: Neil Kownacki <njkkow@gmail.com> Reported-by: Neil Kownacki <njkkow@gmail.com> Tested-by: Neil Kownacki <njkkow@gmail.com> Fixes: fcc8a22cc905 ("drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F") Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101639 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171108152504.12596-1-ville.syrjala@linux.intel.com Acked-by: Eric Anholt <eric@anholt.net>
2017-10-17drm/i915: Remove mostly duplicated video DIP handling from PSR codeVille Syrjälä1-10/+16
Now that the infoframe hooks are part of the intel_dig_port, we can use the normal .write_infoframe() hook to update the VSC SDP. We do need to deal with the size difference between the VSC DIP and the others though. Another minor snag is that the compiler will complain to use if we keep using enum hdmi_infoframe_type type and passing in the DP define instead, so et's just change to unsigned int all over for the inforframe type. v2: Rebase due to other PSR changes Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171013194051.19286-1-ville.syrjala@linux.intel.com
2017-08-22drm/i915: Constify states passed to enable/disable/etc. encoder hooksVille Syrjälä1-35/+35
The enable/disable/etc. encoder hooks aren't supposed to alter the state(s), so pass them as const. Unfortunately C lacks any kind of deep const thingy, so this can't catch all abuses. But at least it acts as a hint to the reader telling them not to mess about with the state(s). v2: Update intel_tv_mode_find() and ironlake_edp_pll_on() as well v3: Deal with intel_sdvo_connector_state Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170818134958.15502-9-ville.syrjala@linux.intel.com
2017-08-22drm/i915: Init infoframe vfuncs for DP encoders as wellVille Syrjälä1-22/+30
DP ports may want to use the video DIP for SDP transmission, so let's initialize the vfuncs for DP encoders as well. The only exception is port A eDP prior to HSW as that one doesn't have a video DIP instance. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170818134958.15502-6-ville.syrjala@linux.intel.com
2017-08-22drm/i915: Move infoframe vfuncs into intel_digital_portVille Syrjälä1-31/+34
DP ports will also want to utilize the video DIP for SDP transmission. So let's move the vfuncs into the dig_port. v2: Rebase due to DDI changes Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170818134958.15502-5-ville.syrjala@linux.intel.com
2017-08-22drm/i915: Check has_infoframes when enabling infoframesVille Syrjälä1-3/+3
has_infoframe is what tells us whether infoframes should be enabled, so let's pass that instead of has_hdmi_sink to .set_infoframes(). Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170818134958.15502-3-ville.syrjala@linux.intel.com
2017-08-18drm/i915: Split pin mapping into per platform functionsAnusha Srivatsa1-22/+91
Cleanup the code. Map the pins in accordance to individual platforms rather than according to ports. Create separate functions for platforms. v2: - Add missing condition for CoffeeLake. Make platform specific functions static. Add function i915_ddc_pin_mapping(). v3: - Rename functions to x_port_to_ddc_pin() which directly indicates the purpose. Correct default return values on CNP and BXT. Rename i915_port_to_ to g4x_port_to since that was the first platform to run this. Correct code style. (Paulo) Sugested-by Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Paulo Zanoni <paulo.r.zanoni@intel.com> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Clinton Taylor <clinton.a.taylor@intel.com> Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1502927114-24012-1-git-send-email-anusha.srivatsa@intel.com
2017-08-11drm/i915: Introduce intel_hpd_pin function.Rodrigo Vivi1-16/+2
The idea is to have an unique place to decide the pin-port per platform. So let's create this function now without any functional change. Just adding together code from hdmi and dp together. v2: Add missing pin for port A. v3: Fix typo on subject. Avoid behaviour change so add WARN_ON and return if port A on HDMI. (by DK). Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170811182650.14327-2-rodrigo.vivi@intel.com
2017-08-10Merge airlied/drm-next into drm-intel-next-queuedDaniel Vetter1-2/+0
Ben Widawsky/Daniel Stone need the extended modifier support from drm-misc to be able to merge CCS support for i915.ko Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-08-08drm: Nuke drm_atomic_helper_connector_dpmsDaniel Vetter1-1/+0
It's dead code, the core handles all this directly now. The only special case is nouveau and tda988x which used one function for both legacy modeset code and -nv50 atomic world instead of 2 vtables. But amounts to exactly the same. v2: Rebase over the panel/brideg refactorings in stm/ltdc. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Archit Taneja <architt@codeaurora.org> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com> Cc: Peter Senna Tschudin <peter.senna@collabora.com> Cc: Martin Donnelly <martin.donnelly@ge.com> Cc: Martyn Welch <martyn.welch@collabora.co.uk> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Inki Dae <inki.dae@samsung.com> Cc: Joonyoung Shim <jy0922.shim@samsung.com> Cc: Seung-Woo Kim <sw0312.kim@samsung.com> Cc: Kyungmin Park <kyungmin.park@samsung.com> Cc: Kukjin Kim <kgene@kernel.org> Cc: Krzysztof Kozlowski <krzk@kernel.org> Cc: Stefan Agner <stefan@agner.ch> Cc: Alison Wang <alison.wang@freescale.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Matthias Brugger <matthias.bgg@gmail.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Carlo Caione <carlo@caione.org> Cc: Kevin Hilman <khilman@baylibre.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Eric Anholt <eric@anholt.net> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Heiko Stuebner <heiko@sntech.de> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Yannick Fertre <yannick.fertre@st.com> Cc: Philippe Cornu <philippe.cornu@st.com> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org> Cc: Thierry Reding <thierry.reding@gmail.com> Cc: Jonathan Hunter <jonathanh@nvidia.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Shawn Guo <shawnguo@kernel.org> Cc: John Stultz <john.stultz@linaro.org> Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Cc: Jeffy Chen <jeffy.chen@rock-chips.com> Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com> Cc: Yakir Yang <kuankuan.y@gmail.com> Cc: Marek Szyprowski <m.szyprowski@samsung.com> Cc: Jose Abreu <Jose.Abreu@synopsys.com> Cc: Romain Perier <romain.perier@collabora.com> Cc: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Rongrong Zou <zourongrong@gmail.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Hai Li <hali@codeaurora.org> Cc: "Noralf Trønnes" <noralf@tronnes.org> Cc: linux-arm-kernel@lists.infradead.org Cc: linux-samsung-soc@vger.kernel.org Cc: intel-gfx@lists.freedesktop.org Cc: linux-mediatek@lists.infradead.org Cc: linux-amlogic@lists.infradead.org Cc: nouveau@lists.freedesktop.org Cc: linux-renesas-soc@vger.kernel.org Cc: linux-rockchip@lists.infradead.org Cc: linux-tegra@vger.kernel.org Cc: virtualization@lists.linux-foundation.org Cc: zain wang <wzz@rock-chips.com> Cc: Baoyou Xie <baoyou.xie@linaro.org> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-8-daniel.vetter@ffwll.ch Acked-by: Neil Armstrong <narmstrong@baylibre.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Philipp Zabel <p.zabel@pengutronix.de> Acked-by: Archit Taneja <architt@codeaurora.org> Tested-by: Philippe Cornu <philippe.cornu@st.com> (on stm) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Shawn Guo <shawnguo@kernel.org> Acked-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Vincent Abriou <vincent.abriou@st.com>
2017-08-08drm: Nuke drm_atomic_helper_connector_set_propertyDaniel Vetter1-1/+0
It's dead code, the core handles all this directly now. This also allows us to unexport drm_atomic_helper_connector_set_property. The only special case is nouveau which used one function for both pre-nv50 legacy modeset code and post-nv50 atomic world instead of 2 vtables. But amounts to exactly the same. What is rather strange here is how few drivers set this up, I suspect the earlier patch to handle properties in the core did end up fixing a pile of possible issues. Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: Sean Paul <seanpaul@chromium.org> Cc: David Airlie <airlied@linux.ie> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Vincent Abriou <vincent.abriou@st.com> Cc: Eric Anholt <eric@anholt.net> Cc: intel-gfx@lists.freedesktop.org Cc: nouveau@lists.freedesktop.org Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20170725080122.20548-7-daniel.vetter@ffwll.ch Acked-by: Vincent Abriou <vincent.abriou@st.com>
2017-07-27drm/i915/glk: set HDMI 2.0 identifierShashank Sharma1-0/+3
This patch sets the is_hdmi2_src identifier in drm connector for GLK platform. GLK contains a native HDMI 2.0 controller. This identifier will help the EDID handling functions to save lot of work which is specific to HDMI 2.0 sources. V3: Added this patch V4: Rebase V4: Rebase V5: Added r-b from Ander V6: Rebase V7: Rebase V8: Rebase V9: Added r-b from Ville V9: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-7-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-27drm/i915: set colorspace for YCBCR420 outputsShashank Sharma1-0/+6
When output colorspace is YCBCR420, we have to load the corresponding colorspace in AVI infoframe. This patch fills the colorspace of AVI infoframe as per the output mode. V2: Rebase V3: Rebase V4: Rebase V5: Added r-b from Ander V6: Checking RGB/YCBCR420 output only (Ville) V7: Add colorspace info in driver(not drm layer) (Ville) V8: Rebase V9: Added r-b from Ville V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-6-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-27drm/i915: prepare pipe for YCBCR420 outputShashank Sharma1-0/+3
To get HDMI YCBCR420 output, the PIPEMISC register should be programmed to: - Generate YCBCR output (bit 11) - In case of YCBCR420 outputs, it should be programmed in full blend mode to use the scaler in 5x3 ratio (bits 26 and 27) This patch: - Adds definition of these bits. - Programs PIPEMISC for YCBCR420 outputs. - Adds readouts to compare HW and SW states. V2: rebase V3: rebase V4: rebase V5: added r-b from Ander V6: Handle only YCBCR420 outputs (ville) V7: rebase V8: Addressed review comments from Ville - Add readouts for state->ycbcr420 and 420 pixel_clock. - Handle warning due to mismatch in clock for ycbcr420 clock. - Rename PIPEMISC macros to match the Bspec. - Add a debug print stating if YCBCR 4:2:0 output enabled. Added r-b from Ville V9: Addressed review comments from Imre: - Add 420 mode clock adjustment in intel_hdmi_mode_valid to prevent 420_only modes getting rejected for high clock. - Add port clock adjustment for ycbcr420 modes in ddi_get_clock - Rename macros as per Ville's suggestion. - Remove unnecessary wl changes. V10: Added r-b from Imre V11: Fixed faulty dotclock handling, and addressed missing comment from previous set of review comments (Imre) V12: Fixed dotclock for 12bpc too, removed 420 check for GEN < 10 Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500904172-31717-1-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-27drm/i915: prepare scaler for YCBCR420 modesetShashank Sharma1-0/+12
To get a YCBCR420 output from intel platforms, we need one scaler to scale down YCBCR444 samples to YCBCR420 samples. This patch: - Does scaler allocation for HDMI ycbcr420 outputs. - Programs PIPE_MISC register for ycbcr420 output. V2: rebase V3: rebase V4: rebase V5: addressed review comments from Ander: - No need to check both scaler_user && hdmi_output. Check for scaler_user is enough. V6: rebase V7: Do not create a new scaler user, use existing pipe scaler user. V8: rebase V9: Addressed review comments from Ville: - Remove leftover comment for HDMI scaler user. - Remove unnecessary blank line. - Make scaler alocation failure a DEBUG log instead of ERROR. Added r-b from Ville V10: Update commit message as per latest code (Imre) Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Ander Conselvan De Oliveira <conselvan2@gmail.com> Cc: Imre Deak <imre.deak@intel.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-3-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-27drm/i915: add config function for YCBCR420 outputsShashank Sharma1-3/+37
This patch checks encoder level support for YCBCR420 outputs. The logic goes as simple as this: If the input mode is YCBCR420-only mode: prepare HDMI for YCBCR420 output, else continue with RGB output mode. It checks if the mode is YCBCR420 and source can support this output then it marks the ycbcr_420 output indicator into crtc state, for further staging in driver. V2: Split the patch into two, kept helper functions in DRM layer. V3: Changed the compute_config function based on new DRM API. V4: Rebase V5: Rebase V6: Check and handle YCBCR420-only modes, discard the property based approach (Ville) V7: Addressed review comments from Ville - add else case in 12BPC check. - extract ycbcr420 state inside hdmi_12bpc_possible function. V8: Addressed review comments from Ville - Remove extra blank lines. - Remove "HDMI" from the description of ycbcr420 state variable. - Remove local variable, use crtc_state->ycbcr420 instead. Added r-b from Ville. V9: Rebase V10: Added r-b from Imre Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com> Reviewed-by: Ville Syrjala <ville.syrjala@linux.intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Imre Deak <imre.deak@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1500650709-14447-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-07-14drm: handle HDMI 2.0 VICs in AVI info-framesShashank Sharma1-1/+4
HDMI 1.4b support the CEA video modes as per range of CEA-861-D (VIC 1-64). For any other mode, the VIC filed in AVI infoframes should be 0. HDMI 2.0 sinks, support video modes range as per CEA-861-F spec, which is extended to (VIC 1-107). This patch adds a bool input variable, which indicates if the connected sink is a HDMI 2.0 sink or not. This will make sure that we don't pass a HDMI 2.0 VIC to a HDMI 1.4 sink. This patch touches all drm drivers, who are callers of this function drm_hdmi_avi_infoframe_from_display_mode but to make sure there is no change in current behavior, is_hdmi2 is kept as false. In case of I915 driver, this patch: - checks if the connected display is HDMI 2.0. - HDMI infoframes carry one of this two type of information: - VIC for 4K modes for HDMI 1.4 sinks - S3D information for S3D modes As CEA-861-F has already defined VICs for 4K videomodes, this patch doesn't allow sending HDMI infoframes for HDMI 2.0 sinks, until the mode is 3D. Cc: Ville Syrjala <ville.syrjala@linux.intel.com> Cc: Jose Abreu <jose.abreu@synopsys.com> Cc: Andrzej Hajda <a.hajda@samsung.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Daniel Vetter <daniel.vetter@intel.com> PS: This patch touches a few lines in few files, which were already above 80 char, so checkpatch gives 80 char warning again. - gpu/drm/omapdrm/omap_encoder.c - gpu/drm/i915/intel_sdvo.c V2: Rebase, Added r-b from Andrzej V3: Addressed review comment from Ville: - Do not send VICs in both AVI-IF and HDMI-IF send only one of it. V4: Rebase V5: Added r-b from Neil. Addressed review comments from Ville - Do not block HDMI vendor IF, instead check for VIC while handling AVI infoframes V6: Rebase V7: Rebase Reviewed-by: Andrzej Hajda <a.hajda@samsung.com> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1499960000-9232-2-git-send-email-shashank.sharma@intel.com Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2017-07-13drm/i915: Use correct iterator macroMaarten Lankhorst1-1/+1
for_each_connector_in_state will be removed, so use the right state here. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@linux.intel.com> Cc: intel-gfx@lists.freedesktop.org Link: http://patchwork.freedesktop.org/patch/msgid/20170712081344.25495-7-maarten.lankhorst@linux.intel.com Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-06-02drm/i915/cnp: add CNP gmbus supportRodrigo Vivi1-3/+5
On CNP PCH based platforms the gmbus is on the south display that is on PCH. The existing implementation for previous platforms already covers the need for CNP expect for the pin pair configuration that follows similar definitions that we had on BXT. v2: Don't drop "_BXT" as the indicator of the first platform supporting this pin numbers. Suggested by Daniel. v3: Add missing else and fix register table since CNP GPIO_CTL starts on 0xC5014. v4: Fix pin number and map according to the current available VBT. Re-add pin 4 for port D. Lost during some rebase. v5: Use table as spec. If VBT is wrong it should be ignored. Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1496434004-29812-5-git-send-email-rodrigo.vivi@intel.com
2017-05-30drm/i915: Convert intel_hdmi connector properties to atomicMaarten Lankhorst1-116/+33
intel_hdmi supports 3 properties, force_audio, broadcast rgb and scaling mode. The last one is only created for eDP, so the is_eDP in set_property is not required. panel fitting and broadcast rgb are straightforward and only requires changing compute_config. force_audio is also used to force DVI mode, which means changes to compute_config and mode_valid. mode_valid is called with connection_mutex held, so it can safely dereference connector->state. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-11-maarten.lankhorst@linux.intel.com
2017-05-30Merge tag 'drm-intel-next-2017-05-29' of ↵Dave Airlie1-1/+6
git://anongit.freedesktop.org/git/drm-intel into drm-next More stuff for 4.13: - skl+ wm fixes from Mahesh Kumar - some refactor and tests for i915_sw_fence (Chris) - tune execlist/scheduler code (Chris) - g4x,g33 gpu reset improvements (Chris, Mika) - guc code cleanup (Michal Wajdeczko, Michał Winiarski) - dp aux backlight improvements (Puthikorn Voravootivat) - buffer based guc/host communication (Michal Wajdeczko) * tag 'drm-intel-next-2017-05-29' of git://anongit.freedesktop.org/git/drm-intel: (253 commits) drm/i915: Update DRIVER_DATE to 20170529 drm/i915: Keep the forcewake timer alive for 1ms past the most recent use drm/i915/guc: capture GuC logs if FW fails to load drm/i915/guc: Introduce buffer based cmd transport drm/i915/guc: Disable send function on fini drm: Add definition for eDP backlight frequency drm/i915: Drop AUX backlight enable check for backlight control drm/i915: Consolidate #ifdef CONFIG_INTEL_IOMMU drm/i915: Only GGTT vma may be pinned and prevent shrinking drm/i915: Serialize GTT/Aperture accesses on BXT drm/i915: Convert i915_gem_object_ops->flags values to use BIT() drm/i915/selftests: Silence compiler warning in igt_ctx_exec drm/i915/guc: Skip port assign on first iteration of GuC dequeue drm/i915: Remove misleading comment in request_alloc drm/i915/g33: Improve reset reliability Revert "drm/i915: Restore lost "Initialized i915" welcome message" drm/i915/huc: Update GLK HuC version drm/i915: Check for allocation failure drm/i915/guc: Remove action status and statistics from debugfs drm/i915/g4x: Improve gpu reset reliability ...
2017-05-08drm/atomic: Handle picture_aspect_ratio in atomic coreMaarten Lankhorst1-15/+3
This is only used in i915, which had used its own non-atomic way to deal with the picture aspect ratio. Move selected aspect_ratio to atomic state and use the atomic state in the affected i915 connectors. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170501133804.8116-2-maarten.lankhorst@linux.intel.com [mlankhorst: taomic -> atomic thanks to Manasi's input] Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2017-04-26drm/i915/glk: Don't allow 12 bpc when htotal is too bigAnder Conselvan de Oliveira1-0/+5
Display workaround #1139 for Geminilake instructs us to restrict HDMI to 8 bpc when htotal is greater than 5460. Otherwise, the pipe is unable to generate a proper signal and is left in a state where corruption is seen with other modes. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100440 Cc: Shashank Sharma <shashank.sharma@intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Shashank Sharma <shashank.sharma@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170424104718.26448-1-ander.conselvan.de.oliveira@intel.com
2017-04-05drm/i915: Typo fix - 'pipe bpc' to 'pipe bpp'Dhinakaran Pandiyan1-1/+1
Noticed this while I was looking at some debug output, [drm:intel_hdmi_compute_config [i915]] picking bpc to 12 for HDMI output [drm:intel_hdmi_compute_config [i915]] forcing pipe bpc to 36 for HDMI I believe the second line should be pipe *bpp* Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1491329765-14340-1-git-send-email-dhinakaran.pandiyan@intel.com
2017-03-28drm/i915: allow HDMI 2.0 clock ratesShashank Sharma1-0/+2
Geminilake has a native HDMI 2.0 controller, which is capable of driving clocks upto 594Mhz. This patch updates the max tmds clock limit for the same. V2: rebase V3: rebase V4: added r-b from Ander V5: rebase V6: rebase V7: rebase V8: rebase V9: rebase V10: rebase Cc: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan De Oliveira <ander.conselvan.de.oliveira@intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-7-git-send-email-shashank.sharma@intel.com
2017-03-28drm/i915: enable scramblingShashank Sharma1-0/+63
Geminilake platform sports a native HDMI 2.0 controller, and is capable of driving pixel-clocks upto 594Mhz. HDMI 2.0 spec mendates scrambling for these higher clocks, for reduced RF footprint. This patch checks if the monitor supports scrambling, and if required, enables it during the modeset. V2: Addressed review comments from Ville: - Do not track scrambling status in DRM layer, track somewhere in driver like in intel_crtc_state. - Don't talk to monitor at such a low layer, set monitor scrambling in intel_enable_ddi() before enabling the port. V3: Addressed review comments from Jani - In comments, function names, use "sink" instead of "monitor", so that the implementation could be close to the language of HDMI spec. V4: Addressed review comment from Maarten - scrambling -> hdmi_scrambling - high_tmds_clock_ratio -> hdmi_high_tmds_clock_ratio V5: Addressed review comments from Ville and Ander - Do not modifiy the crtc_state after compute_config. Move all scrambling and tmds_clock_ratio calcutations to compute_config. - While setting scrambling for source/sink, do not check the conditions again, just go by the crtc_state flags. This will simplyfy the condition checks. V6: Addressed review comments from Ville - Do not add IS_GLK check in disable/enable function, instead add it in compute_config, while setting state flags. - Remove unnecessary paranthesis. - Simplyfy handle_sink_scrambling function as suggested. - Add readout code for scrambling status in get_ddi_config and add a check for the same in pipe_config_compare. V7: Addressed review comments from Ander/Ville - No separate function for source scrambling, make it inline - Align the last line of the macro TRANS_DDI_HDMI_SCRAMBLING_MASK - Do not add platform check while setting source scrambling - Use pipe_config instead of crtc->config to set sink scrambling - To readout scrambling status, Compare with SCRAMBLING_MASK not any of its bits - Remove platform check in intel_pipe_config_compare while checking scrambling status V8: Fixed mege conflict, Addressed review comments from Ander - Remove the desciption/comment about scrambling fom the caller, move it to the function - Move the IS_GLK check into scrambling function - Fix alignment V9: Fixed review comments from Ville, Ander - Pass the scrambling state variables as bool input to the sink_scrambling function and let the disable call be unconditional. - Fix alignments in function calls and debug messages. - Add kernel doc for function intel_hdmi_handle_sink_scrambling V10: Rebase Signed-off-by: Shashank Sharma <shashank.sharma@intel.com> Reviewed-by: Ander Conselvan de Oliveira <conselvan2@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-6-git-send-email-shashank.sharma@intel.com
2017-03-13drm/i915: Reject HDMI 12bpc if the sink doesn't indicate supportVille Syrjälä1-3/+21
Check that the sink really declared 12bpc support before we enable it. This should not actually never happen since it's mandatory for HDMI sinks to support 12bpc if they support any deep color modes. But reality disagrees with the theory and there are actually sinks in the wild that violate the spec. v2: Fix the output_types check Update commit message to state that these things are in fact real Cc: stable@vger.kernel.org Cc: Nicholas Sielicki <nicholas.sielicki@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=99250 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170213175818.24958-1-ville.syrjala@linux.intel.com Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
2017-03-08Merge tag 'drm-intel-next-2017-03-06' of ↵Dave Airlie1-12/+5
git://anongit.freedesktop.org/git/drm-intel into drm-next 4 weeks worth of stuff since I was traveling&lazy: - lspcon improvements (Imre) - proper atomic state for cdclk handling (Ville) - gpu reset improvements (Chris) - lots and lots of polish around fences, requests, waiting and everything related all over (both gem and modeset code), from Chris - atomic by default on gen5+ minus byt/bsw (Maarten did the patch to flip the default, really this is a massive joint team effort) - moar power domains, now 64bit (Ander) - big pile of in-kernel unit tests for various gem subsystems (Chris), including simple mock objects for i915 device and and the ggtt manager. - i915_gpu_info in debugfs, for taking a snapshot of the current gpu state. Same thing as i915_error_state, but useful if the kernel didn't notice something is stick. From Chris. - bxt dsi fixes (Umar Shankar) - bxt w/a updates (Jani) - no more struct_mutex for gem object unreference (Chris) - some execlist refactoring (Tvrtko) - color manager support for glk (Ander) - improve the power-well sync code to better take over from the firmware (Imre) - gem tracepoint polish (Tvrtko) - lots of glk fixes all around (Ander) - ctx switch improvements (Chris) - glk dsi support&fixes (Deepak M) - dsi fixes for vlv and clanups, lots of them (Hans de Goede) - switch to i915.ko types in lots of our internal modeset code (Ander) - byt/bsw atomic wm update code, yay (Ville) * tag 'drm-intel-next-2017-03-06' of git://anongit.freedesktop.org/git/drm-intel: (432 commits) drm/i915: Update DRIVER_DATE to 20170306 drm/i915: Don't use enums for hardware engine id drm/i915: Split breadcrumbs spinlock into two drm/i915: Refactor wakeup of the next breadcrumb waiter drm/i915: Take reference for signaling the request from hardirq drm/i915: Add FIFO underrun tracepoints drm/i915: Add cxsr toggle tracepoint drm/i915: Add VLV/CHV watermark/FIFO programming tracepoints drm/i915: Add plane update/disable tracepoints drm/i915: Kill level 0 wm hack for VLV/CHV drm/i915: Workaround VLV/CHV sprite1->sprite0 enable underrun drm/i915: Sanitize VLV/CHV watermarks properly drm/i915: Only use update_wm_{pre,post} for pre-ilk platforms drm/i915: Nuke crtc->wm.cxsr_allowed drm/i915: Compute proper intermediate wms for vlv/cvh drm/i915: Skip useless watermark/FIFO related work on VLV/CHV when not needed drm/i915: Compute vlv/chv wms the atomic way drm/i915: Compute VLV/CHV FIFO sizes based on the PM2 watermarks drm/i915: Plop vlv/chv fifo sizes into crtc state drm/i915: Plop vlv wm state into crtc_state ...
2017-02-27drm/i915: Store encoder power domain in struct intel_encoderAnder Conselvan de Oliveira1-4/+4
The encoder power domain is obviously tied to the encoder, so store it in struct intel_encoder. This avoids some indirection. v2: Rebase Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Imre Deak <imre.deak@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170222063431.10060-3-ander.conselvan.de.oliveira@intel.com
2017-02-24Merge tag 'drm-for-v4.11-less-shouty' of ↵Linus Torvalds1-99/+99
git://people.freedesktop.org/~airlied/linux Pull drm updates from Dave Airlie: "This is the main drm pull request for v4.11. Nothing too major, the tinydrm and mmu-less support should make writing smaller drivers easier for some of the simpler platforms, and there are a bunch of documentation updates. Intel grew displayport MST audio support which is hopefully useful to people, and FBC is on by default for GEN9+ (so people know where to look for regressions). AMDGPU has a lot of fixes that would like new firmware files installed for some GPUs. Other than that it's pretty scattered all over. I may have a follow up pull request as I know BenH has a bunch of AST rework and fixes and I'd like to get those in once they've been tested by AST, and I've got at least one pull request I'm just trying to get the author to fix up. Core: - drm_mm reworked - Connector list locking and iterators - Documentation updates - Format handling rework - MMU-less support for fbdev helpers - drm_crtc_from_index helper - Core CRC API - Remove drm_framebuffer_unregister_private - Debugfs cleanup - EDID/Infoframe fixes - Release callback - Tinydrm support (smaller drivers for simple hw) panel: - Add support for some new simple panels i915: - FBC by default for gen9+ - Shared dpll cleanups and docs - GEN8 powerdomain cleanup - DMC support on GLK - DP MST audio support - HuC loading support - GVT init ordering fixes - GVT IOMMU workaround fix amdgpu/radeon: - Power/clockgating improvements - Preliminary SR-IOV support - TTM buffer priority and eviction fixes - SI DPM quirks removed due to firmware fixes - Powerplay improvements - VCE/UVD powergating fixes - Cleanup SI GFX code to match CI/VI - Support for > 2 displays on 3/5 crtc asics - SI headless fixes nouveau: - Rework securre boot code in prep for GP10x secure boot - Channel recovery improvements - Initial power budget code - MMU rework preperation vmwgfx: - Bunch of fixes and cleanups exynos: - Runtime PM support for MIC driver - Cleanups to use atomic helpers - UHD Support for TM2/TM2E boards - Trigger mode fix for Rinato board etnaviv: - Shader performance fix - Command stream validator fixes - Command buffer suballocator rockchip: - CDN DisplayPort support - IOMMU support for arm64 platform imx-drm: - Fix i.MX5 TV encoder probing - Remove lower fb size limits msm: - Support for HW cursor on MDP5 devices - DSI encoder cleanup - GPU DT bindings cleanup sti: - stih410 cleanups - Create fbdev at binding - HQVDP fixes - Remove stih416 chip functionality - DVI/HDMI mode selection fixes - FPS statistic reporting omapdrm: - IRQ code cleanup dwi-hdmi bridge: - Cleanups and fixes adv-bridge: - Updates for nexus sii8520 bridge: - Add interlace mode support - Rework HDMI and lots of fixes qxl: - probing/teardown cleanups ZTE drm: - HDMI audio via SPDIF interface - Video Layer overlay plane support - Add TV encoder output device atmel-hlcdc: - Rework fbdev creation logic tegra: - OF node fix fsl-dcu: - Minor fixes mali-dp: - Assorted fixes sunxi: - Minor fix" [ This was the "fixed" pull, that still had build warnings due to people not even having build tested the result. I'm not a happy camper I've fixed the things I noticed up in this merge. - Linus ] * tag 'drm-for-v4.11-less-shouty' of git://people.freedesktop.org/~airlied/linux: (1177 commits) lib/Kconfig: make PRIME_NUMBERS not user selectable drm/tinydrm: helpers: Properly fix backlight dependency drm/tinydrm: mipi-dbi: Fix field width specifier warning drm/tinydrm: mipi-dbi: Silence: ‘cmd’ may be used uninitialized drm/sti: fix build warnings in sti_drv.c and sti_vtg.c files drm/amd/powerplay: fix PSI feature on Polars12 drm/amdgpu: refuse to reserve io mem for split VRAM buffers drm/ttm: fix use-after-free races in vm fault handling drm/tinydrm: Add support for Multi-Inno MI0283QT display dt-bindings: Add Multi-Inno MI0283QT binding dt-bindings: display/panel: Add common rotation property of: Add vendor prefix for Multi-Inno drm/tinydrm: Add MIPI DBI support drm/tinydrm: Add helper functions drm: Add DRM support for tiny LCD displays drm/amd/amdgpu: post card if there is real hw resetting performed drm/nouveau/tmr: provide backtrace when a timeout is hit drm/nouveau/pci/g92: Fix rearm drm/nouveau/drm/therm/fan: add a fallback if no fan control is specified in the vbios drm/nouveau/hwmon: expose power_max and power_crit ..
2017-02-09drm/i915: Remove WA for swapped HPD pins in broxton A steppingAnder Conselvan de Oliveira1-8/+1
Remove workaround for swapped HPD pins in broxton A stepping, which is pre-production hardware. Cc: Jani Nikula <jani.nikula@linux.intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Jani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170203140316.20792-1-ander.conselvan.de.oliveira@intel.com
2017-01-26drm/edid: Set AVI infoframe Q even when QS=0Ville Syrjälä1-2/+4
HDMI 2.0 recommends that we set the Q bits in the AVI infoframe even when the sink does not support quantization range selection (QS=0). According to CEA-861 we can do that as long as the Q we send matches the default quantization range for the mode. Previously I think I had misread the spec as saying that you can't send a non-zero Q at all when QS=0. But that's not what the spec actually says. v2: Fix typo in commit message (Jani) Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-5-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Eric Anholt <eric@anholt.net>
2017-01-26drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range()Ville Syrjälä1-8/+5
Pull the logic to populate the quantization range information in the AVI infoframe into a small helper. We'll be adding a bit more logic to it, and having it in a central place seems like a good idea since it's based on the CEA-861 spec. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111125725.8086-4-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Eric Anholt <eric@anholt.net>
2017-01-26drm/edid: Introduce drm_default_rgb_quant_range()Ville Syrjälä1-1/+2
Make the code selecting the RGB quantization range a little less magicy by wrapping it up in a small helper. v2: s/adjusted_mode/mode in vc4 to make it actually compile v3: Add a comment proposed by Eric Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170111141835.25369-1-ville.syrjala@linux.intel.com Reviewed-by: Jani Nikula <jani.nikula@intel.com> Acked-by: Eric Anholt <eric@anholt.net>
2017-01-25drm/i915: Add support for audio driver notificationsJerome Anand1-0/+1
Notifiations like mode change, hot plug and edid to the audio driver are added. This is inturn used by the audio driver for its functionality. A new interface file capturing the notifications needed by the audio driver is added Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com> Signed-off-by: Jerome Anand <jerome.anand@intel.com> Acked-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Takashi Iwai <tiwai@suse.de>
2016-12-02drm/i915/glk: Reuse broxton code for geminilakeAnder Conselvan de Oliveira1-3/+3
Geminilake is mostly backwards compatible with broxton, so change most of the IS_BROXTON() checks to IS_GEN9_LP(). Differences between the platforms will be implemented in follow-up patches. v2: Don't reuse broxton's path in intel_update_max_cdclk(). Don't set plane count as in broxton. v3: Rebase v4: Include the check intel_bios_is_port_hpd_inverted(). Commit message. v5: Leave i915_dmc_info() out; glk's csr version != bxt's. (Rodrigo) v6: Rebase. v7: Convert a few mode IS_BROXTON() occurances in pps, ddi, dsi and pll code. (Rodrigo) v8: Squash a couple of DDI patches with more conversions. (Rodrigo) Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com> Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1480667037-11215-2-git-send-email-ander.conselvan.de.oliveira@intel.com
2016-11-25drm/i915: Pass dev_priv to intel_setup_outputs()Ander Conselvan de Oliveira1-4/+4
Pass dev_priv to intel_setup_outputs() and functions called by it, since those are all intel i915 specific functions. Also, in the majority of the functions dev_priv is used more often than dev. In the rare cases where there are a few calls back into drm core, a local dev variable was added. v2: Don't convert dev to &dev_priv->drm in intel_dsi_init. (Ville) Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479910904-11005-1-git-send-email-ander.conselvan.de.oliveira@intel.com
2016-11-24drm/i915: Remove all ->config dereferences from intel_hdmi, v2.Maarten Lankhorst1-85/+85
In all cases we can now obtain the relevant crtc_state/conn_state from the relevant callbacks, which means all the ->config accesses can be removed and the code cleaned up. Changes since v1: - cstate -> crtc_state Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/8b02a6b4-606a-e43a-b357-ad17f491525b@linux.intel.com [mlankhorst: Reinstate missing comment] Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-11-09drm/i915: Pass atomic state to intel_audio_codec_enable, v2.Maarten Lankhorst1-1/+1
drm_select_eld requires mode_config.mutex and connection_mutex because it looks at the connector list and at the legacy encoders. This is not required, because when we call audio_codec_enable we know which connector it was called for, so pass the state. This also removes having to look at crtc->config. Changes since v1: - Use intel_crtc->pipe instead of drm_crtc_index. (Ville) Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-8-git-send-email-maarten.lankhorst@linux.intel.com Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
2016-11-09drm/i915: Convert intel_hdmi to use atomic stateMaarten Lankhorst1-27/+21
This is the last connector still looking at crtc->config. Fix this. Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1478609742-13603-7-git-send-email-maarten.lankhorst@linux.intel.com
2016-11-01drm/i915: Pass dev_priv to intel_wait_for_vblank()Ville Syrjälä1-1/+1
Unify our approach to things by passing around dev_priv instead of dev. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1477946245-14134-8-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
2016-10-21drm/i915: Respect alternate_ddc_pin for all DDI portsVille Syrjälä1-36/+48
The VBT provides the platform a way to mix and match the DDI ports vs. GMBUS pins. Currently we only trust the VBT for DDI E, which I suppose has no standard GMBUS pin assignment. However, there are machines out there that use a non-standard mapping for the other ports as well. Let's start trusting the VBT on this one for all ports on DDI platforms. I've structured the code such that other platforms could easily start using this as well, by simply filling in the ddi_port_info. IIRC there may be CHV system that might actually need this. v2: Include a commit message, include a debug message during init Cc: stable@vger.kernel.org Cc: Maarten Maathuis <madman2003@gmail.com> Tested-by: Maarten Maathuis <madman2003@gmail.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97877 Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1476208368-5710-3-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Jim Bride <jim.bride@linux.intel.com>
2016-10-14drm/i915: Make IS_VALLEYVIEW only take dev_privTvrtko Ursulin1-1/+1
Saves 944 bytes of .rodata strings and 128 bytes of .text. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_CHERRYVIEW only take dev_privTvrtko Ursulin1-5/+5
Saves 864 bytes of .rodata strings and ~100 of .text. v2: Add parantheses around dev_priv. (Ville Syrjala) v3: Rebase. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_G4X only take dev_privTvrtko Ursulin1-2/+2
Saves 472 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make IS_BROXTON only take dev_privTvrtko Ursulin1-3/+3
Saves 1392 bytes of .rodata strings. Also change a few function/macro prototypes in i915_gem_gtt.c from dev to dev_priv where it made more sense to do so. v2: Add parantheses around dev_priv. (Ville Syrjala) v3: Mention function prototype changes. (David Weinehall) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Cc: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com>
2016-10-14drm/i915: Make INTEL_DEVID only take dev_privTvrtko Ursulin1-1/+1
Saves 4472 bytes of .rodata strings. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make HAS_GMCH_DISPLAY only take dev_privTvrtko Ursulin1-2/+3
More .rodata string saving by avoid __I915__ magic inside WARNs. v2: Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
2016-10-14drm/i915: Make INTEL_PCH_TYPE & co only take dev_privTvrtko Ursulin1-9/+10
This saves 1872 bytes of .rodata strings. v2: * Rebase. * Add parantheses around dev_priv. (Ville Syrjala) Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com> Reviewed-by: David Weinehall <david.weinehall@linux.intel.com> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Jani Nikula <jani.nikula@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-27 01:57:35 +0300