summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/i915/intel_guc.c
AgeCommit message (Collapse)AuthorFilesLines
2017-12-14drm/i915/guc: Move GuC workqueue allocations outside of the mutexMichał Winiarski1-0/+57
This gets rid of the following lockdep splat: ====================================================== WARNING: possible circular locking dependency detected 4.15.0-rc2-CI-Patchwork_7428+ #1 Not tainted ------------------------------------------------------ debugfs_test/1351 is trying to acquire lock: (&dev->struct_mutex){+.+.}, at: [<000000009d90d1a3>] i915_mutex_lock_interruptible+0x47/0x130 [i915] but task is already holding lock: (&mm->mmap_sem){++++}, at: [<000000005df01c1e>] __do_page_fault+0x106/0x560 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #6 (&mm->mmap_sem){++++}: __might_fault+0x63/0x90 _copy_to_user+0x1e/0x70 filldir+0x8c/0xf0 dcache_readdir+0xeb/0x160 iterate_dir+0xe6/0x150 SyS_getdents+0xa0/0x130 entry_SYSCALL_64_fastpath+0x1c/0x89 -> #5 (&sb->s_type->i_mutex_key#5){++++}: lockref_get+0x9/0x20 -> #4 ((completion)&req.done){+.+.}: wait_for_common+0x54/0x210 devtmpfs_create_node+0x130/0x150 device_add+0x5ad/0x5e0 device_create_groups_vargs+0xd4/0xe0 device_create+0x35/0x40 msr_device_create+0x22/0x40 cpuhp_invoke_callback+0xc5/0xbf0 cpuhp_thread_fun+0x167/0x210 smpboot_thread_fn+0x17f/0x270 kthread+0x173/0x1b0 ret_from_fork+0x24/0x30 -> #3 (cpuhp_state-up){+.+.}: cpuhp_issue_call+0x132/0x1c0 __cpuhp_setup_state_cpuslocked+0x12f/0x2a0 __cpuhp_setup_state+0x3a/0x50 page_writeback_init+0x3a/0x5c start_kernel+0x393/0x3e2 secondary_startup_64+0xa5/0xb0 -> #2 (cpuhp_state_mutex){+.+.}: __mutex_lock+0x81/0x9b0 __cpuhp_setup_state_cpuslocked+0x4b/0x2a0 __cpuhp_setup_state+0x3a/0x50 page_alloc_init+0x1f/0x26 start_kernel+0x139/0x3e2 secondary_startup_64+0xa5/0xb0 -> #1 (cpu_hotplug_lock.rw_sem){++++}: cpus_read_lock+0x34/0xa0 apply_workqueue_attrs+0xd/0x40 __alloc_workqueue_key+0x2c7/0x4e1 intel_guc_submission_init+0x10c/0x650 [i915] intel_uc_init_hw+0x29e/0x460 [i915] i915_gem_init_hw+0xca/0x290 [i915] i915_gem_init+0x115/0x3a0 [i915] i915_driver_load+0x9a8/0x16c0 [i915] i915_pci_probe+0x2e/0x90 [i915] pci_device_probe+0x9c/0x120 driver_probe_device+0x2a3/0x480 __driver_attach+0xd9/0xe0 bus_for_each_dev+0x57/0x90 bus_add_driver+0x168/0x260 driver_register+0x52/0xc0 do_one_initcall+0x39/0x150 do_init_module+0x56/0x1ef load_module+0x231c/0x2d70 SyS_finit_module+0xa5/0xe0 entry_SYSCALL_64_fastpath+0x1c/0x89 -> #0 (&dev->struct_mutex){+.+.}: lock_acquire+0xaf/0x200 __mutex_lock+0x81/0x9b0 i915_mutex_lock_interruptible+0x47/0x130 [i915] i915_gem_fault+0x201/0x760 [i915] __do_fault+0x15/0x70 __handle_mm_fault+0x85b/0xe40 handle_mm_fault+0x14f/0x2f0 __do_page_fault+0x2d1/0x560 page_fault+0x22/0x30 other info that might help us debug this: Chain exists of: &dev->struct_mutex --> &sb->s_type->i_mutex_key#5 --> &mm->mmap_sem Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&mm->mmap_sem); lock(&sb->s_type->i_mutex_key#5); lock(&mm->mmap_sem); lock(&dev->struct_mutex); *** DEADLOCK *** 1 lock held by debugfs_test/1351: #0: (&mm->mmap_sem){++++}, at: [<000000005df01c1e>] __do_page_fault+0x106/0x560 stack backtrace: CPU: 2 PID: 1351 Comm: debugfs_test Not tainted 4.15.0-rc2-CI-Patchwork_7428+ #1 Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0057.2017.0119.1758 01/19/2017 Call Trace: dump_stack+0x5f/0x86 print_circular_bug+0x230/0x3b0 check_prev_add+0x439/0x7b0 ? lockdep_init_map_crosslock+0x20/0x20 ? unwind_get_return_address+0x16/0x30 ? __lock_acquire+0x1385/0x15a0 __lock_acquire+0x1385/0x15a0 lock_acquire+0xaf/0x200 ? i915_mutex_lock_interruptible+0x47/0x130 [i915] __mutex_lock+0x81/0x9b0 ? i915_mutex_lock_interruptible+0x47/0x130 [i915] ? i915_mutex_lock_interruptible+0x47/0x130 [i915] ? i915_mutex_lock_interruptible+0x47/0x130 [i915] i915_mutex_lock_interruptible+0x47/0x130 [i915] ? __pm_runtime_resume+0x4f/0x80 i915_gem_fault+0x201/0x760 [i915] __do_fault+0x15/0x70 __handle_mm_fault+0x85b/0xe40 handle_mm_fault+0x14f/0x2f0 __do_page_fault+0x2d1/0x560 page_fault+0x22/0x30 RIP: 0033:0x7f98d6f49116 RSP: 002b:00007ffd6ffc3278 EFLAGS: 00010283 RAX: 00007f98d39a2bc0 RBX: 0000000000000000 RCX: 0000000000001680 RDX: 0000000000001680 RSI: 00007ffd6ffc3400 RDI: 00007f98d39a2bc0 RBP: 00007ffd6ffc33a0 R08: 0000000000000000 R09: 00000000000005a0 R10: 000055e847c2a830 R11: 0000000000000002 R12: 0000000000000001 R13: 000055e847c1d040 R14: 00007ffd6ffc3400 R15: 00007f98d6752ba0 v2: Init preempt_work unconditionally (Chris) v3: Mention that we need the enable_guc=1 for lockdep splat (Chris) Testcase: igt/debugfs_test/read_all_entries # with i915.enable_guc=1 Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-2-michal.winiarski@intel.com
2017-12-14drm/i915/guc: Move shared data allocation away from submission pathMichał Winiarski1-0/+51
We need shared data for actions (e.g. guc suspend/resume), and we're using those with GuC submission disabled. Let's introduce intel_guc_init and move shared data alloc there. This fixes GPF during module unload with HuC, but without GuC submission: BUG: unable to handle kernel NULL pointer dereference at 000000005aee7809 IP: intel_guc_suspend+0x34/0x140 [i915] PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP Modules linked in: i915(O-) netconsole x86_pkg_temp_thermal intel_powerclamp coretemp crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mei_me i2c_i801 mei prime_numbers [last unloaded: i915] CPU: 2 PID: 2794 Comm: rmmod Tainted: G U W O 4.15.0-rc2+ #297 Hardware name: /NUC6i5SYB, BIOS SYSKLi35.86A.0054.2016.0930.1102 09/30/2016 task: 0000000055945c61 task.stack: 00000000264ccb43 RIP: 0010:intel_guc_suspend+0x34/0x140 [i915] RSP: 0018:ffffc90000483df8 EFLAGS: 00010286 RAX: 0000000000000000 RBX: ffff880829180000 RCX: 0000000000000000 RDX: 0000000000000006 RSI: ffff880844c2c938 RDI: ffff880844c2c000 RBP: ffff880829180000 R08: 00000000a29c58c1 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa040ba40 R13: ffffffffa040bab0 R14: ffff88084a195060 R15: 000055df3ef357a0 FS: 00007ff43c043740(0000) GS:ffff88084e200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000f9 CR3: 000000083f179005 CR4: 00000000003606e0 Call Trace: i915_gem_suspend+0x9d/0x130 [i915] ? i915_driver_unload+0x68/0x180 [i915] i915_driver_unload+0x70/0x180 [i915] i915_pci_remove+0x15/0x20 [i915] pci_device_remove+0x36/0xb0 device_release_driver_internal+0x15f/0x220 driver_detach+0x3a/0x80 bus_remove_driver+0x58/0xd0 pci_unregister_driver+0x29/0x90 SyS_delete_module+0x150/0x1e0 entry_SYSCALL_64_fastpath+0x23/0x9a RIP: 0033:0x7ff43b51b5c7 RSP: 002b:00007ffe6825a758 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007ff43b51b5c7 RDX: 000000000000000a RSI: 0000000000000800 RDI: 000055df3ef35808 RBP: 0000000000000000 R08: 00007ffe682596d1 R09: 0000000000000000 R10: 00007ff43b594880 R11: 0000000000000206 R12: 000055df3ef357a0 R13: 00007ffe68259740 R14: 000055df3ef35260 R15: 000055df3ef357a0 Code: 00 00 02 74 03 31 c0 c3 53 48 89 fb 48 83 ec 10 e8 52 0f f8 ff 48 b8 01 05 00 00 02 00 00 00 48 89 44 24 04 48 8b 83 00 12 00 00 <f6> 80 f9 00 00 00 01 0f 84 a7 00 00 00 f6 80 98 00 00 00 01 0f RIP: intel_guc_suspend+0x34/0x140 [i915] RSP: ffffc90000483df8 CR2: 00000000000000f9 ---[ end trace 23a192a61d937a3e ]--- Fixes: b8e5eb960b28 ("drm/i915/guc: Allocate separate shared data object for GuC communication") Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171213221352.7173-1-michal.winiarski@intel.com
2017-12-06drm/i915/guc: Introduce USES_GUC_xxx helper macrosMichal Wajdeczko1-1/+1
In the upcoming patch we will change the way how to recognize when GuC is in use. Using helper macros will minimize scope of that changes. While here, update dev_info message. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-3-michal.wajdeczko@intel.com
2017-12-06drm/i915/guc: Move firmware selection to init_earlyMichal Wajdeczko1-0/+1
Doing GuC firmware path selection from sanitize_options function is not perfect, while there is no problem with doing so during early init stage as we already have all needed data. Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171206135316.32556-2-michal.wajdeczko@intel.com
2017-12-01drm/i915: Remove unsafe i915.enable_rc6Chris Wilson1-2/+1
It has been many years since the last confirmed sighting (and fix) of an RC6 related bug (usually a system hang). Remove the parameter to stop users from setting dangerous values, as they often set it during triage and end up disabling the entire runtime pm instead (the option is not a fine scalpel!). Furthermore, it allows users to set known dangerous values which were intended for testing and not for production use. For testing, we can always patch in the required setting without having to expose ourselves to random abuse. v2: Fixup NEEDS_WaRsDisableCoarsePowerGating fumble, and document the lack of ilk support better. v3: Clear intel_info->rc6p if we don't support rc6 itself. Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: Rodrigo Vivi <rodrigo.vivi@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Imre Deak <imre.deak@intel.com> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch> Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171201113030.18360-1-chris@chris-wilson.co.uk
2017-11-16drm/i915/guc: Rename i915_guc_submission.c|h to intel_guc_submission.c|hSagar Arun Kamble1-1/+1
With all component structures and functions named appropriately, change the names of GuC submission source files. There were bunch of style issues in guc_submission.c that are highlighted now by checkpatch. Fix those. Update name in Documentation/gpu. (Joonas) v2: Rebase. v3: Rebase. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Michal Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Acked-by: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/1510839162-25197-6-git-send-email-sagar.a.kamble@intel.com Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-11-02drm/i915/guc: Add support for reset engine using GuC commandsMichel Thierry1-0/+24
This patch adds per engine reset and recovery (TDR) support when GuC is used to submit workloads to GPU. In the case of i915 directly submission to ELSP, driver manages hang detection, recovery and resubmission. With GuC submission these tasks are shared between driver and GuC. i915 is still responsible for detecting a hang, and when it does it only requests GuC to reset that Engine. GuC internally manages acquiring forcewake and idling the engine before resetting it. Once the reset is successful, i915 takes over again and handles the resubmission. The scheduler in i915 knows which requests are pending so after resetting a engine, pending workloads/requests are resubmitted again. v2: s/i915_guc_request_engine_reset/i915_guc_reset_engine/ to match the non-guc function names. v3: Removed debug message about engine restarting from which request, since the new baseline do it regardless of submission mode. (Chris) v4: Rebase. v5: Do not pass unnecessary reporting flags to the fw (Jeff); tasklet_schedule(&execlists->irq_tasklet) handles the resubmit; rebase. v6: Rename the existing reset engine function and share a similar interface between guc and non-guc paths (Chris). Signed-off-by: Michel Thierry <michel.thierry@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171031225309.10888-1-michel.thierry@intel.com Reviewed-by: Jeff McGee <jeff.mcgee@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
2017-10-26drm/i915/guc: Allocate separate shared data object for GuC communicationMichał Winiarski1-12/+2
We were using first page of kernel context render state for sharing data with GuC. While it's justified by the fact that those pages are not used (note, GuC still enforces this layout and refuses to work if we remove the extra page in front), it's also confusing (why are we using this particular page?). Let's allocate a separate object instead. v2: Drop kernel_context from GuC suspend/resume action handlers (Michel) Suggested-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Michał Winiarski <michal.winiarski@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Cc: Jeff McGee <jeff.mcgee@intel.com> Cc: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Oscar Mateo <oscar.mateo@intel.com> Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171025200020.16636-4-michal.winiarski@intel.com
2017-10-16drm/i915/guc: Small fixups post code moveMichal Wajdeczko1-5/+6
Existing code needs some style fixes. To avoid polluting pure move patch, do it now as separate step. Suggested-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-4-michal.wajdeczko@intel.com
2017-10-16drm/i915/guc: Move GuC boot param initialization out of xferMichal Wajdeczko1-0/+92
We want to keep ucode xfer functions separate from other initialization. Once separated, add explicit forcewake. v2: use BLITTER domain only and add comment (Daniele) Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #1 Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-3-michal.wajdeczko@intel.com
2017-10-16drm/i915: Move intel_guc_wopcm_size to intel_guc.cMichal Wajdeczko1-0/+11
Function intel_guc_wopcm_size didn't fit well in the old place. With this move upcoming cleanup will be simpler. Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171016144724.17244-2-michal.wajdeczko@intel.com
2017-10-11drm/i915: Rename intel_enable_rc6 to intel_rc6_enabledSagar Arun Kamble1-1/+2
This function gives the status of RC6, whether disabled or if enabled then which state. intel_enable_rc6 will be used for enabling RC6 in the next patch. v2: Rebase. v3: Rebase. Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Imre Deak <imre.deak@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Reviewed-by: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com> #1 Reviewed-by: Ewelina Musial <ewelina.musial@intel.com> #1 Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/1507360055-19948-10-git-send-email-sagar.a.kamble@intel.com Acked-by: Imre Deak <imre.deak@intel.com> Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Link: https://patchwork.freedesktop.org/patch/msgid/20171010213010.7415-9-chris@chris-wilson.co.uk
2017-10-06drm/i915/guc: Move GuC core definitions into dedicated filesMichal Wajdeczko1-0/+264
Move GuC core definitions into dedicated files as we want to keep GuC specific code in separated files. v2: move all functions in single patch (Joonas) fix old checkpatch issues (Sagar) v3: rebased Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com> Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com> Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> #1 Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-4-michal.wajdeczko@intel.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-30 06:10:05 +0300