summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/arm
AgeCommit message (Collapse)AuthorFilesLines
2017-03-23BackMerge tag 'v4.11-rc3' into drm-nextDave Airlie4-5/+19
Linux 4.11-rc3 as requested by Daniel
2017-03-14drm: Create DEFINE_DRM_GEM_CMA_FOPS and roll it out to driversDaniel Vetter2-22/+2
Less code ftw. This converts all drivers except the tinydrm helper module. That one needs more work, since it gets the THIS_MODULE reference from tinydrm.ko instead of the actual driver module like it should. Probably needs a similar trick like I used here with generating the entire struct with a macro. Cc: Noralf Trønnes <noralf@tronnes.org> Reviewed-by: Sean Paul <seanpaul@chromium.org> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/20170308141257.12119-24-daniel.vetter@ffwll.ch
2017-03-10drm: mali-dp: Fix smart layer not going to compositionMihail Atanassov3-3/+18
Use rectangle 1 as a generic plane. Existing code already sets the smart layer bounding box size + offset. The rectangles' offsets are relative to the bounding box, so there is no need to set R1's offset (reset value is 0), just its size which is the same as the bounding box. Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2017-03-10drm: mali-dp: Remove mclk rate managementMihail Atanassov1-2/+1
The rate of mclk depends on the use-case. If no downscaling is required, then mclk == pxlclk is a valid option; with downscaling however, the rate at which mclk runs determines how much a plane can be downscaled before composition. This is a system integration + power management issue that is more suited to firmware rather than this driver. Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2017-02-12drm: Constify drm_mode_config atomic helper private pointerLaurent Pinchart1-1/+1
The drm_mode_config helper private field points to a structure of function pointers that don't need to be modified at runtime. Make it const. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Acked-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170102091613.6310-1-laurent.pinchart@ideasonboard.com
2017-02-07drm: malidp: use vblank hooks in struct drm_crtc_funcsShawn Guo2-21/+21
The vblank hooks in struct drm_driver are deprecated and only meant for legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks in struct drm_crtc_funcs should be used instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Mali DP Maintainers <malidp@foss.arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-6-git-send-email-shawnguo@kernel.org
2017-02-07drm: hdlcd: use vblank hooks in struct drm_crtc_funcsShawn Guo2-20/+20
The vblank hooks in struct drm_driver are deprecated and only meant for legacy drivers. For modern drivers with DRIVER_MODESET flag, the hooks in struct drm_crtc_funcs should be used instead. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-5-git-send-email-shawnguo@kernel.org
2017-02-07drm: remove drm_vblank_no_hw_counter assignment from driver codeShawn Guo2-2/+0
Core code already makes drm_driver.get_vblank_counter hook optional by letting drm_vblank_no_hw_counter be the default implementation for the function hook. So the drm_vblank_no_hw_counter assignment in the driver code becomes redundant and can be removed now. Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Cc: Alexey Brodkin <abrodkin@synopsys.com> Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Boris Brezillon <boris.brezillon@free-electrons.com> Cc: Inki Dae <inki.dae@samsung.com> Cc: Stefan Agner <stefan@agner.ch> Cc: Xinliang Liu <z.liuxinliang@hisilicon.com> Cc: Daniel Vetter <daniel.vetter@intel.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: CK Hu <ck.hu@mediatek.com> Cc: Neil Armstrong <narmstrong@baylibre.com> Cc: Rob Clark <robdclark@gmail.com> Cc: Marek Vasut <marex@denx.de> Cc: Ben Skeggs <bskeggs@redhat.com> Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Cc: Mark Yao <mark.yao@rock-chips.com> Cc: Benjamin Gaignard <benjamin.gaignard@linaro.org> Cc: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Jyri Sarha <jsarha@ti.com> Cc: Eric Anholt <eric@anholt.net> Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Acked-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Russell King <rmk+kernel@armlinux.org.uk> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Alexey Brodkin <abrodkin@synopsys.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1486458995-31018-3-git-send-email-shawnguo@kernel.org
2017-02-02drm: Rely on mode_config data for fb_helper initializationGabriel Krisman Bertazi2-2/+2
Instead of receiving the num_crts as a parameter, we can read it directly from the mode_config structure. I audited the drivers that invoke this helper and I believe all of them initialize the mode_config struct accordingly, prior to calling the fb_helper. I used the following coccinelle hack to make this transformation, except for the function headers and comment updates. The first and second rules are split because I couldn't find a way to remove the unused temporary variables at the same time I removed the parameter. // <smpl> @r@ expression A,B,D,E; identifier C; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ expression A,B,C,D,E; @@ ( - drm_fb_helper_init(A,B,C,D) + drm_fb_helper_init(A,B,D) | - drm_fbdev_cma_init_with_funcs(A,B,C,D,E) + drm_fbdev_cma_init_with_funcs(A,B,D,E) | - drm_fbdev_cma_init(A,B,C,D) + drm_fbdev_cma_init(A,B,D) ) @@ identifier r.C; type T; expression V; @@ - T C; <... when != C - C = V; ...> // </smpl> Changes since v1: - Rebased on top of the tip of drm-misc-next. - Remove mention to sti since a proper fix got merged. Suggested-by: Daniel Vetter <daniel.vetter@intel.com> Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk> Reviewed-by: Eric Anholt <eric@anholt.net> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170202162640.27261-1-krisman@collabora.co.uk
2017-02-01Merge tag 'drm-misc-next-2017-01-30' of ↵Dave Airlie1-7/+0
git://anongit.freedesktop.org/git/drm-misc into drm-next Another round of -misc stuff: - Noralf debugfs cleanup cleanup (not yet everything, some more driver patches awaiting acks). - More doc work. - edid/infoframe fixes from Ville. - misc 1-patch fixes all over, as usual Noralf needs this for his tinydrm pull request. * tag 'drm-misc-next-2017-01-30' of git://anongit.freedesktop.org/git/drm-misc: (48 commits) drm/vc4: Remove vc4_debugfs_cleanup() dma/fence: Export enable-signaling tracepoint for emission by drivers drm/tilcdc: Remove tilcdc_debugfs_cleanup() drm/tegra: Remove tegra_debugfs_cleanup() drm/sti: Remove drm_debugfs_remove_files() calls drm/radeon: Remove drm_debugfs_remove_files() call drm/omap: Remove omap_debugfs_cleanup() drm/hdlcd: Remove hdlcd_debugfs_cleanup() drm/etnaviv: Remove etnaviv_debugfs_cleanup() drm/etnaviv: allow build with COMPILE_TEST drm/amd/amdgpu: Remove drm_debugfs_remove_files() call drm/prime: Clarify DMA-BUF/GEM Object lifetime drm/ttm: Make sure BOs being swapped out are cacheable drm/atomic: Remove drm_atomic_debugfs_cleanup() drm: drm_minor_register(): Clean up debugfs on failure drm: debugfs: Remove all files automatically on cleanup drm/fourcc: add vivante tiled layout format modifiers drm/edid: Set YQ bits in the AVI infoframe according to CEA-861-F drm/edid: Set AVI infoframe Q even when QS=0 drm/edid: Introduce drm_hdmi_avi_infoframe_quant_range() ...
2017-01-27drm/hdlcd: Remove hdlcd_debugfs_cleanup()Noralf Trønnes1-7/+0
drm_debugfs_cleanup() now removes all minor->debugfs_list entries automatically, so the drm_driver.debugfs_cleanup callback is not needed. Cc: liviu.dudau@arm.com Signed-off-by: Noralf Trønnes <noralf@tronnes.org> Acked-by: Liviu Dudau <liviu.dudau@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/20170126225621.12314-9-noralf@tronnes.org
2017-01-26drm: mali-dp: fix stride setting for multi-plane formatsMihail Atanassov4-10/+50
Hardware has multiple (2 or 3, depending on model) stride registers per layer; add a function that correctly takes that into account. On hardware that only has 2 stride registers, ensure that 3-plane (YUV) content has identical strides for both chroma planes. Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [Removed smart layer stride setup, comment and commit message clarifications] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2017-01-26drm: mali-dp: Add plane offset to the plane's physical start address registerLiviu Dudau1-0/+1
Add the fb->offset[] value to the plane's physical start address registe. Without that, packed formats are rendered incorrectly. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2017-01-26drm: mali-dp: Check for sufficient address spaceMihail Atanassov2-0/+22
If the device-tree 'reg' node doesn't reserve enough space for the DP, fail to bind. Reviewed-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> [renamed added function to malidp_has_sufficient_address_space] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2017-01-26drm: mali-dp: Check hw version matches device-treeMihail Atanassov2-0/+54
Refuse to bind if the device-tree compatible string lists a different hardware version. Reviewed-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2017-01-26drm: mali-dp: Rename malidp_input_format to malidp_pixel_formatBrian Starkey3-20/+20
We're going to use the same format list for output formats, so rename everything related to input formats to avoid confusion. Signed-off-by: Brian Starkey <brian.starkey@arm.com> [touched commit title to clarify the final struct name] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2017-01-23drm: mali-dp: fix Lx_CONTROL register fields clobberMihail Atanassov1-1/+2
When updating the rotation fields, one of the assignments zeroes out the rest of the register fields, which include settings for chroma siting, inverse gamma, AMBA AXI caching, and alpha blending. Signed-off-by: Mihail Atanassov <mihail.atanassov@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2017-01-23drm: mali-dp: Fix transposed horizontal/vertical flipBrian Starkey1-2/+2
The horizontal and vertical flip flags were the wrong way around, causing reflect-x to result in reflect-y being applied and vice-versa. Fix them. Fixes: ad49f8602fe8 ("drm/arm: Add support for Mali Display Processors") Signed-off-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2017-01-23drm: mali-dp: Fix destination size handling when rotatingBrian Starkey1-7/+2
The destination rectangle provided by userspace in the CRTC_X/Y/W/H properties is already expressed as the dimensions after rotation. This means we shouldn't swap the width and height ourselves when a 90/270 degree rotation is requested, so remove the code doing the swap. Fixes: ad49f8602fe8 ("drm/arm: Add support for Mali Display Processors") Signed-off-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2017-01-23drm: mali-dp: Don't force source size == crtc sizeBrian Starkey1-2/+1
Remove the check enforcing that src_w and src_h match crtc_w and crtc_h, as this prevents rotation from working. The check was intended to disallow scaling, but drm_plane_helper_check_state() does that for us, while also taking rotation into account, so the removed check was redundant in any case. Signed-off-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>
2017-01-23drm: mali-dp: Check more use cases in the plane's ->atomic_check()Liviu Dudau1-1/+14
Mali DP's plane ->atomic_check() only checks for the new state submitting frame buffers with supported pixel formats and if there is enough rotation memory for rotated planes. Add a call to drm_plane_helper_check_state() to add additional checks for plane state validity and clipping issues. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2017-01-23drm: malidp: Remove event_list member from struct malidp_drmLiviu Dudau2-3/+1
This struct member managed to outlive the submission process without being removed. It is useless. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2017-01-23drm/arm/malidp: Fix possible dereference of NULLShailendra Verma1-7/+8
There is possible deference of NULL pointer on return of malidp_duplicate_plane_state() if kmalloc fails. Check the returned kmalloc pointer before continuing. Signed-off-by: Shailendra Verma <Shailendra.v@samsung.com> [cleaned up the code and re-formatted the commit message] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-12-15drm: Nuke fb->pixel_formatVille Syrjälä2-5/+5
Replace uses of fb->pixel_format with fb->format->format. Less duplicated information is a good thing. Note that coccinelle failed to eliminate the "/* fourcc format */" comment from drm_framebuffer.h, so I had to do that part manually. @@ struct drm_framebuffer *FB; expression E; @@ drm_helper_mode_fill_fb_struct(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ i9xx_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ ironlake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *FB; expression E; @@ skylake_get_initial_plane_config(...) { ... - FB->pixel_format = E; ... } @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - a->pixel_format + a->format->format | - b.pixel_format + b.format->format ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - a->fb->pixel_format + a->fb->format->format | - b.fb->pixel_format + b.fb->format->format ) @@ struct drm_crtc *CRTC; @@ ( - CRTC->primary->fb->pixel_format + CRTC->primary->fb->format->format | - CRTC->primary->state->fb->pixel_format + CRTC->primary->state->fb->format->format ) @@ struct drm_mode_set *set; @@ ( - set->fb->pixel_format + set->fb->format->format | - set->crtc->primary->fb->pixel_format + set->crtc->primary->fb->format->format ) @@ @@ struct drm_framebuffer { ... - uint32_t pixel_format; ... }; v2: Fix commit message (Laurent) Rebase due to earlier removal of many fb->pixel_format uses, including the 'fb->format = drm_format_info(fb->format->format);' snafu v3: Adjusted the semantic patch a bit and regenerated due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> (v1) Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751175-18463-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15drm: Replace drm_format_plane_cpp() with fb->format->cpp[]Ville Syrjälä1-1/+1
Replace drm_format_plane_cpp(fb->pixel_format) with just fb->format->cpp[]. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; expression E; @@ ( - drm_format_plane_cpp(a->pixel_format, E) + a->format->cpp[E] | - drm_format_plane_cpp(b.pixel_format, E) + b.format->cpp[E] ) @@ struct drm_plane_state *a; struct drm_plane_state b; expression E; @@ ( - drm_format_plane_cpp(a->fb->pixel_format, E) + a->fb->format->cpp[E] | - drm_format_plane_cpp(b.fb->pixel_format, E) + b.fb->format->cpp[E] ) @@ struct drm_framebuffer *a; identifier T; expression E; @@ T = a->pixel_format <+... - drm_format_plane_cpp(T, E) + a->format->cpp[E] ...+> @@ struct drm_framebuffer b; identifier T; expression E; @@ T = b.pixel_format <+... - drm_format_plane_cpp(T, E) + b.format->cpp[E] ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751057-18123-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-15drm: Replace drm_format_num_planes() with fb->format->num_planesVille Syrjälä1-1/+1
Replace drm_format_num_planes(fb->pixel_format) with just fb->format->num_planes. Avoids the expensive format info lookup. @@ struct drm_framebuffer *a; struct drm_framebuffer b; @@ ( - drm_format_num_planes(a->pixel_format) + a->format->num_planes | - drm_format_num_planes(b.pixel_format) + b.format->num_planes ) @@ struct drm_plane_state *a; struct drm_plane_state b; @@ ( - drm_format_num_planes(a->fb->pixel_format) + a->fb->format->num_planes | - drm_format_num_planes(b.fb->pixel_format) + b.fb->format->num_planes ) @@ struct drm_framebuffer *a; identifier T; @@ T = a->pixel_format <+... - drm_format_num_planes(T) + a->format->num_planes ...+> @@ struct drm_framebuffer b; identifier T; @@ T = b.pixel_format <+... - drm_format_num_planes(T) + b.format->num_planes ...+> v2: Rerun spatch due to code changes Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Link: http://patchwork.freedesktop.org/patch/msgid/1481751022-18015-1-git-send-email-ville.syrjala@linux.intel.com
2016-12-14drm/arm: Add local 'fb' variablesVille Syrjälä2-11/+13
Add a local 'fb' variable to a few places to get rid of the 'crtc->primary->fb' stuff. Looks neater and helps me with my ppor coccinelle skills later. In some places the local variable was already there, just not used consistently. Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1479498793-31021-10-git-send-email-ville.syrjala@linux.intel.com Reviewed-by: Brian Starkey <brian.starkey@arm.com> Acked-by: Liviu Dudau <liviu.dudau@arm.com>
2016-12-05Backmerge tag 'v4.9-rc8' into drm-nextDave Airlie2-4/+3
Linux 4.9-rc8 Daniel requested this so we could apply some follow on fixes cleanly to -next.
2016-11-25drm: hdlcd: Fix cleanup orderRobin Murphy1-1/+1
If hdlcd_drm_bind() fails at drm_fbdev_cma_init(), its cleanup will call drm_mode_config_cleanup() as if to balance drm_mode_config_reset(). The net result is that drm_connector_cleanup() will clean up the active connectors long before component_unbind_all() gets called, so when the connector later tries to clean up itself after being unbound, Bad Things can happen: [ 4.121888] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 4.129951] pgd = ffffff80091e0000 [ 4.133345] [00000000] *pgd=00000009ffffe003, *pud=00000009ffffe003, *pmd=0000000000000000 [ 4.141613] Internal error: Oops: 96000005 [#1] PREEMPT SMP [ 4.147144] Modules linked in: [ 4.150188] CPU: 0 PID: 122 Comm: kworker/u12:2 Not tainted 4.8.0-rc2+ #989 [ 4.157097] Hardware name: ARM Juno development board (r1) (DT) [ 4.162981] Workqueue: deferwq deferred_probe_work_func [ 4.168173] task: ffffffc975d93200 task.stack: ffffffc975dac000 [ 4.174055] PC is at drm_connector_cleanup+0x58/0x1c0 [ 4.179074] LR is at tda998x_unbind+0x24/0x40 [ 4.183401] pc : [<ffffff80084c46f0>] lr : [<ffffff800850414c>] pstate: 00000045 [ 4.190750] sp : ffffffc975dafa10 [ 4.194041] x29: ffffffc975dafa10 x28: ffffffc9768152a8 [ 4.199325] x27: ffffffc97ff46450 x26: ffffff8008d99000 [ 4.204608] x25: dead000000000100 x24: dead000000000200 [ 4.209891] x23: ffffffc976bf91e8 x22: 0000000000000000 [ 4.215172] x21: ffffffc976bf9170 x20: ffffffc976bf9170 [ 4.220454] x19: ffffffc976bf9018 x18: 0000000000000000 [ 4.225737] x17: 0000000074ce71ee x16: 000000008ff5d35f [ 4.231019] x15: ffffffc97681e91c x14: ffffffffffffffff [ 4.236301] x13: ffffffc97681e185 x12: 0000000000000038 [ 4.241583] x11: 0101010101010101 x10: 0000000000000000 [ 4.246866] x9 : 0000000040000000 x8 : 0000000000210d00 [ 4.252148] x7 : ffffffc97fea8c00 x6 : 000000000000001b [ 4.257430] x5 : ffffff80084b7b8c x4 : 0000000000000080 [ 4.262712] x3 : ffffff8008504128 x2 : ffffffc975df3800 [ 4.267993] x1 : 0000000000000000 x0 : 0000000000000000 ... [ 4.750937] [<ffffff80084c46f0>] drm_connector_cleanup+0x58/0x1c0 [ 4.756990] [<ffffff800850414c>] tda998x_unbind+0x24/0x40 [ 4.762354] [<ffffff8008507918>] component_unbind.isra.4+0x28/0x50 [ 4.768492] [<ffffff8008507a0c>] component_unbind_all+0xcc/0xd8 [ 4.774373] [<ffffff80084d5adc>] hdlcd_drm_bind+0x234/0x418 [ 4.779909] [<ffffff8008507b58>] try_to_bring_up_master+0x140/0x1a0 [ 4.786133] [<ffffff8008507c50>] component_add+0x98/0x170 [ 4.791496] [<ffffff8008504b90>] tda998x_probe+0x18/0x20 [ 4.796774] [<ffffff80086bf914>] i2c_device_probe+0x164/0x258 [ 4.802481] [<ffffff800850d094>] driver_probe_device+0x204/0x2b0 [ 4.808447] [<ffffff800850d28c>] __device_attach_driver+0x9c/0xf8 [ 4.814498] [<ffffff800850b108>] bus_for_each_drv+0x58/0x98 [ 4.820033] [<ffffff800850cd64>] __device_attach+0xc4/0x138 [ 4.825567] [<ffffff800850d338>] device_initial_probe+0x10/0x18 [ 4.831446] [<ffffff800850c124>] bus_probe_device+0x94/0xa0 [ 4.836981] [<ffffff800850c5b0>] deferred_probe_work_func+0x78/0xb0 [ 4.843207] [<ffffff80080d2998>] process_one_work+0x118/0x378 [ 4.848914] [<ffffff80080d2c40>] worker_thread+0x48/0x498 [ 4.854276] [<ffffff80080d8918>] kthread+0xd0/0xe8 [ 4.859036] [<ffffff8008082e90>] ret_from_fork+0x10/0x40 [ 4.864314] Code: f2fbd5b9 f2fbd5b8 f8478ee0 eb17001f (f9400013) [ 4.870472] ---[ end trace a643cfe4ce1d838b ]--- Fix this by moving the drm_mode_config_cleanup() much later such that it correctly balances drm_mode_config_init(). Suggested-by: Russell King <linux@armlinux.org.uk> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-22drm/arm: hdlcd: fix plane base address updateRussell King1-3/+2
While testing HDMI with Xorg on the Juno board, I find that when Xorg starts up or shuts down, the display is shifted significantly to the right and wrapped in the active region. (No sync bars are visible.) The timings are correct, it behaves as if the start address has been shifted many pixels _into_ the framebuffer. This occurs whenever the display mode size is changed - using xrandr in Xorg shows that changing the resolution triggers the problem almost every time, but changing the refresh rate does not. Using devmem2 to disable and re-enable the HDLCD resolves the issue, and repeated disable/enable cycles do not make the issue re-appear. Further debugging shows that we try to update the controller configuration while enabled. Alwys ensure that the HDLCD is disabled prior to updating the controller timings, and use drm_crtc_vblank_off()/drm_crtc_vblank_on() so that DRM knows whether it can expect vblank interrupts. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-17Merge branch 'drm-tda998x-mali' of git://git.armlinux.org.uk/~rmk/linux-arm ↵Dave Airlie2-15/+22
into drm-next Fix conncector registration with tda998x. * 'drm-tda998x-mali' of git://git.armlinux.org.uk/~rmk/linux-arm: drm/i2c: tda998x: mali-dp: hdlcd: refactor connector registration
2016-11-11Merge branch 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld into ↵Dave Airlie5-40/+92
drm-next Here is the list of fixes that I have for drm/mali-dp. They've been on the mailing lists for a while and merged into linux-next for a few weeks, but due to holiday and travel to Linux Plumbers I did not send the pull request earlier. I don't know if these patches can be pulled into v4.9 still (they will conflict with Ville Syrjälä's cleanup of DRM_ROTATE series that is already in drm-next), but if you do that would be great. * 'for-upstream/mali-dp' of git://linux-arm.org/linux-ld: drm: mali-dp: Clear CVAL when leaving config mode drm/arm: mark symbols static where possible drm: mali-dp: Add support for setting plane's rotation property from userspace. drm: mali-dp: Don't set DRM_PLANE_COMMIT_ACTIVE_ONLY drm: mali-dp: Store internal format and n_planes in plane state drm: mali-dp: Enable alpha blending drm: mali-dp: Refactor plane initialisation arm: mali-dp: Extract mode_config cleanup into malidp_fini drm: mali-dp: Add pitch alignment check for planes drm: mali-dp: Add pitch alignment check function drm: mali-dp: Set the drm->irq_enabled flag to match driver's state. drm: mali-dp: Clear the config_valid flag before using it in wait_event.
2016-11-08drm: mali-dp: Clear CVAL when leaving config modeBrian Starkey1-0/+2
It's possible for CVAL to get set whilst we are in config mode. If this happens, afer we leave config mode the HW will latch whatever configuration is in the registers at the next vsync. Most likely this will be a partial configuration, as we'll be racing against the ongoing atomic_commit. To avoid this, clear CVAL before leaving config mode. Signed-off-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-04drm/arm: mark symbols static where possibleBaoyou Xie1-3/+4
We get 2 warnings when building kernel with W=1: drivers/gpu/drm/arm/malidp_planes.c:49:25: warning: no previous prototype for 'malidp_duplicate_plane_state' [-Wmissing-prototypes] drivers/gpu/drm/arm/malidp_planes.c:66:6: warning: no previous prototype for 'malidp_destroy_plane_state' [-Wmissing-prototypes] In fact, both functions are only used in the file in which they are declared and don't need a declaration, but can be made static. So this patch marks these functions with 'static'. Signed-off-by: Baoyou Xie <baoyou.xie@linaro.org> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-04drm: mali-dp: Add support for setting plane's rotation property from userspace.Liviu Dudau1-0/+1
In order to support DRM_IOCTL_MODE_OBJ_SETPROPERTY for the rotation property we need to have a ->set_property hook defined for the planes. Set the plane's ->set_property hook to drm_atomic_helper_plane_set_property() Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-04drm: mali-dp: Don't set DRM_PLANE_COMMIT_ACTIVE_ONLYBrian Starkey1-2/+1
We need to explicitly disable our planes, so don't set the flag which would otherwise skip the plane disable when the CRTC is disabled. Signed-off-by: Brian Starkey <brian.starkey@arm.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-04drm: mali-dp: Store internal format and n_planes in plane stateBrian Starkey2-15/+15
Save a search through the format lists at commit-time by storing the internal format ID and number of planes in our plane state. Signed-off-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-04drm: mali-dp: Enable alpha blendingBrian Starkey1-6/+27
Always enable pixel-level alpha blending with the background, so that buffers which include an alpha channel are displayed correctly. Signed-off-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-04drm: mali-dp: Refactor plane initialisationBrian Starkey1-13/+8
As we add more features, it makes sense to skip all the features not supported by the smart layer together, instead of checking each one individually. Achieve this by refactoring the plane init loop. Signed-off-by: Brian Starkey <brian.starkey@arm.com> [re-factor code after upstream changed rotation property to be per-plane] Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-04arm: mali-dp: Extract mode_config cleanup into malidp_finiBrian Starkey1-4/+8
Split out malidp_fini as the opposite of malidp_init. This helps keep the cleanup paths neat and easier to manage. Signed-off-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-04drm: mali-dp: Add pitch alignment check for planesBrian Starkey1-1/+14
Check that the framebuffer pitches are appropriately aligned when checking planes. Signed-off-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-04drm: mali-dp: Add pitch alignment check functionBrian Starkey2-0/+12
Different hardware versions have different requirements when it comes to pitch alignment. Add a function which can be used to check pitch alignment for a device. Signed-off-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-03drm: mali-dp: Set the drm->irq_enabled flag to match driver's state.Liviu Dudau1-0/+3
Mali DP driver does not use drm_irq_{un,}install() function so the drm->irq_enabled flag does not get set automatically. drm_wait_vblank() checks the value of the flag among other functions. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-03drm: mali-dp: Clear the config_valid flag before using it in wait_event.Liviu Dudau1-0/+1
config_valid variable is used to signal the activation of the CVAL request when the vsync interrupt has fired. malidp_set_and_wait_config_valid() uses the variable in wait_event_interruptible_timeout without clearing it first, so the wait is skipped. Signed-off-by: Liviu Dudau <Liviu.Dudau@arm.com>
2016-11-02drm: define drm_compat_ioctl NULL on CONFIG_COMPAT=n and reduce #ifdefsJani Nikula2-4/+0
If we define drm_compat_ioctl NULL on CONFIG_COMPAT=n, we don't have to check for the config everywhere. Reviewed-by: Patrik Jakobsson <patrik.r.jakobsson@gmail.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/1478014844-27454-1-git-send-email-jani.nikula@intel.com
2016-10-31drm/i2c: tda998x: mali-dp: hdlcd: refactor connector registrationBrian Starkey2-15/+22
Connectors shouldn't be registered until the rest of the whole device is set up, so that consistent state is presented to userspace. As such, remove the calls to drm_connector_register() and drm_connector_unregister() from tda998x, as these are now handled by drm_dev_(un)register() itself. To work with this change, the mali-dp and hdlcd bind and unbind sequences have to be reordered, to ensure that the componentised encoder/connector is bound before drm_dev_register() registers all connectors. Similarly, the device must be unregistered before the component is unbound. Altogether, this allows other drivers using tda998x to be de-midlayered, and to have less racy initialisation of their components. Splitting this commit into three (one per driver) isn't possible without intermediate breakage, so it is all squashed together here. Suggested-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Brian Starkey <brian.starkey@arm.com> Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
2016-10-25drm: convert DT component matching to component_match_add_release()Russell King2-2/+5
Convert DT component matching to use component_match_add_release(). Acked-by: Jyri Sarha <jsarha@ti.com> Reviewed-by: Jyri Sarha <jsarha@ti.com> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Sean Paul <seanpaul@chromium.org> Link: http://patchwork.freedesktop.org/patch/msgid/E1bwo6l-0005Io-Q1@rmk-PC.armlinux.org.uk
2016-10-21drm/arm: Use per-plane rotation propertyVille Syrjälä1-8/+5
The global mode_config.rotation_property is going away, switch over to per-plane rotation_property. v2: Drop the BIT() Cc: Liviu Dudau <liviu.dudau@arm.com> Cc: Brian Starkey <brian.starkey@arm.com> Cc: Mali DP Maintainers <malidp@foss.arm.com> Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Acked-by: Brian Starkey <brian.starkey@arm.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1474907460-10717-5-git-send-email-ville.syrjala@linux.intel.com
2016-10-18drm/arm: mali-dp: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()Laurent Pinchart1-6/+1
The driver doesn't need the color depth, only the number of bits per pixel. Use the right API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-13-git-send-email-laurent.pinchart@ideasonboard.com
2016-10-18drm: hdlcd: Replace drm_fb_get_bpp_depth() with drm_format_plane_cpp()Laurent Pinchart1-3/+2
The driver needs the number of bytes per pixel, not the bpp and depth info meant for fbdev compatibility. Use the right API. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: Liviu Dudau <Liviu.Dudau@arm.com> Signed-off-by: Archit Taneja <architt@codeaurora.org> Link: http://patchwork.freedesktop.org/patch/msgid/1476744081-24485-6-git-send-email-laurent.pinchart@ideasonboard.com
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-05 01:01:34 +0300