summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display
AgeCommit message (Collapse)AuthorFilesLines
2021-08-06drm/amd/display: workaround for hard hang on HPD on native DPQingqing Zhuo1-1/+3
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enable, causing DMUB to access an unresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off on native DP. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Fix resetting DCN3.1 HW when resuming from S4Jude Shih1-3/+5
[Why] On S4 resume we also need to fix detection of when to reload DMCUB firmware because we're currently using the VBIOS version which isn't compatible with the driver version. [How] Update the hardware init check for DCN31 since it's the ASIC that has this issue. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jude Shih <jude.shih@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Increase stutter watermark for dcn303Bing Guo1-2/+2
[Why&How] Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent underflow in certain modes. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1XBing Guo1-1/+1
Why: In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X by the number of pipes ODM Combined. How: Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the number of pipes ODM Combined. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Assume LTTPR interop for DCN31+Wesley Chalmers4-19/+40
[WHY] For DCN31 onward, LTTPR is to be enabled and set to Transparent by VBIOS. Driver is to assume that VBIOS has done this without needing to check the VBIOS interop bit. [HOW] Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the interop bit to true for DCN31+. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-03drm/amd/display: Fix typo in commentsCai Huoqing7-8/+8
Remove the repeated word 'the' from comments Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-30Merge tag 'amd-drm-next-5.15-2021-07-29' of ↵Dave Airlie69-702/+1278
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-07-29: amdgpu: - VCN/JPEG power down sequencing fixes - Various navi pcie link handling fixes - Clockgating fixes - Yellow Carp fixes - Beige Goby fixes - Misc code cleanups - S0ix fixes - SMU i2c bus rework - EEPROM handling rework - PSP ucode handling cleanup - SMU error handling rework - AMD HDMI freesync fixes - USB PD firmware update rework - MMIO based vram access rework - Misc display fixes - Backlight fixes - Add initial Cyan Skillfish support - Overclocking fixes suspend/resume amdkfd: - Sysfs leak fix - Add counters for vm faults and migration - GPUVM TLB optimizations radeon: - Misc fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730033455.3852-1-alexander.deucher@amd.com
2021-07-29drm/amdgpu/display: add support for multiple backlightsAlex Deucher2-69/+82
On platforms that support multiple backlights, register each one separately. This lets us manage them independently rather than registering a single backlight and applying the same settings to both. v2: fix typo: Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amdgpu/display: only enable aux backlight control for OLED panelsAlex Deucher1-2/+2
We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Author: Camille Cho <Camille.Cho@amd.com> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715 Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: 3.2.146Aric Cyr1-1/+1
This version brings along following fixed: - Guard DST_Y_PREFETCH register overflow in DCN21 - Add missing DCN21 IP parameter - Fix PSR command version - Add ETW logging for AUX failures - Add ETW log to dmub_psr_get_state - Fixed EdidUtility build errors - Fix missing reg offset for the dmcub test debug registers - Adding update authentication interface - Remove unused functions of opm state query support - Always wait for update lock status - Refactor riommu invalidation wa - Ensure dentist display clock update finished in DCN20 Reviewed-by: Hsieh Mike <Mike.Hsieh@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: [FW Promotion] Release 0.0.76Anthony Koo1-2/+2
Reviewed-by: Cyr Aric <aric.cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: ensure dentist display clock update finished in DCN20Dale Zhao1-1/+1
[Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by: Cyr Aric <aric.cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: refactor riommu invalidation waEric Yang7-50/+28
[Why] A cleaner solution, only done once on boot. [How] Remove previous workaround and configure an extra vmid one time on boot Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: Always wait for update lock statusEric Bernstein1-5/+3
Remove code that would skip wait for lock status for Diags FPGA case Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: remove unused functionsWenjing Liu7-53/+22
[why] It has been decided that opm state query support will be dropped. Therefore link encryption enabled and save current encryption states won't be used anymore and there are no foreseeable usages in the future. We will remove these two interfaces for clean up. Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: add update authentication interfaceWenjing Liu2-6/+69
[why] Previously to toggle authentication, we need to remove and add the same display back with modified adjustment. This method will toggle DTM state without actual hardware changes. This is not per design and would cause potential issues in the long run. [how] We are creating a dedicated interface that does the same thing as remove and add back the display without changing DTM state. Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wenjing Liu <wenjing.liu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: fix missing reg offsetEric Yang1-1/+4
[Why] Initializing was missing reg offsets for the dmcub test debug registers causing assert [How] Add initialization Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-28drm/amd/display: Fixed EdidUtility build errorsMark Morra4-320/+382
[HOW] Added #ifdefs and refactored various parts of dc to allow dc_link to be built by AMD EDID UTILITY [WHY] dc_dsc was refactored moving some of the code that AMD EDID UTILITY needed to dc_link, so now dc_link needs to be included by AMD EDID UTILITY Squash in DCN config fix (Alex) Reviewed-by: Leung Martin <Martin.Leung@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Mark Morra <MarkAlbert.Morra@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amdgpu/display: only enable aux backlight control for OLED panelsAlex Deucher1-2/+2
We've gotten a number of reports about backlight control not working on panels which indicate that they use aux backlight control. A recent patch: commit 2d73eabe2984a435737498ab39bb1500a9ffe9a9 Author: Camille Cho <Camille.Cho@amd.com> Date: Thu Jul 8 18:28:37 2021 +0800 drm/amd/display: Only set default brightness for OLED [Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Changes some other code to only use aux for backlight control on OLED panels. The commit message seems to indicate that PWM should be used for SDR mode on HDR panels. Do something similar for backlight control in general. This may need to be revisited if and when HDR started to get used. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1438 Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213715 Reviewed-by: Roman Li <Roman.Li@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: ensure dentist display clock update finished in DCN20Dale Zhao1-1/+1
[Why] We don't check DENTIST_DISPCLK_CHG_DONE to ensure dentist display clockis updated to target value. In some scenarios with large display clock margin, it will deliver unfinished display clock and cause issues like display black screen. [How] Checking DENTIST_DISPCLK_CHG_DONE to ensure display clock has been update to target value before driver do other clock related actions. Reviewed-by: Cyr Aric <aric.cyr@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Dale Zhao <dale.zhao@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-07-27drm/amd/display: Add missing DCN21 IP parameterVictor Lu1-0/+1
[why] IP parameter min_meta_chunk_size_bytes is read for bandwidth calculations but it was never defined. [how] Define min_meta_chunk_size_bytes and initialize value to 256. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Guard DST_Y_PREFETCH register overflow in DCN21Victor Lu1-0/+3
[why] DST_Y_PREFETCH can overflow when DestinationLinesForPrefetch values are too large due to the former being limited to 8 bits. [how] Set the maximum value of DestinationLinesForPrefetch to be 255 * refclk period. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Add ETW log to dmub_psr_get_stateWyatt Wood1-3/+14
[Why] GPINT commands have the lowest priority in DMCUB, so it's possible that the command isn't processed in time. [How] Add a log to help identify this case. Reviewed-by: Koo Anthony <Anthony.Koo@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Add ETW logging for AUX failuresWyatt Wood1-0/+8
[Why] Would like to identify the cause of AUX transactions failing via ETW logs. [How] Add ETW logging for AUX failures. Reviewed-by: Pavic Josip <Josip.Pavic@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Wyatt Wood <wyatt.wood@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Fix PSR command versionMikita Lipski1-2/+2
[why] For dual eDP when setting the new settings we need to set command version to DMUB_CMD_PSR_CONTROL_VERSION_1, otherwise DMUB will not read panel_inst parameter. [how] Instead of PSR_VERSION_1 pass DMUB_CMD_PSR_CONTROL_VERSION_1 Reviewed-by: Wood Wyatt <Wyatt.Wood@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Add missing DCN21 IP parameterVictor Lu1-0/+1
[why] IP parameter min_meta_chunk_size_bytes is read for bandwidth calculations but it was never defined. [how] Define min_meta_chunk_size_bytes and initialize value to 256. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-27drm/amd/display: Guard DST_Y_PREFETCH register overflow in DCN21Victor Lu1-0/+3
[why] DST_Y_PREFETCH can overflow when DestinationLinesForPrefetch values are too large due to the former being limited to 8 bits. [how] Set the maximum value of DestinationLinesForPrefetch to be 255 * refclk period. Reviewed-by: Laktyushkin Dmytro <dmytro.laktyushkin@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Fix ASSR regression on embedded panelsStylon Wang1-3/+5
[Why] Regression found in some embedded panels traces back to the earliest upstreamed ASSR patch. The changed code flow are causing problems with some panels. [How] - Change ASSR enabling code while preserving original code flow as much as possible - Simplify the code on guarding with internal display flag Bug: https://bugzilla.kernel.org/show_bug.cgi?id=213779 Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1620 Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Stylon Wang <stylon.wang@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amdgpu: Fix documentaion for dm_dmub_outbox1_low_irqAnson Jacob1-1/+1
Fix make htmldocs complaint: ./drivers/gpu/drm/amd/display/amdgpu_dm/amdgpu_dm.c:628: warning: Excess function parameter 'interrupt_params' description in 'DMUB_TRACE_MAX_READ' v2: Moved DMUB_TRACE_MAX_READ macro above function documentation Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> CC: Harry Wentland <harry.wentland@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/amdgpu: Add a new line to debugfs phy_settings outputAnson Jacob1-1/+1
Add new line to phy_settings output Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/amdgpu: Update debugfs link_settings output link_rate field in hexAnson Jacob1-8/+8
link_rate is updated via debugfs using hex values, set it to output in hex as well. eg: Resolution: 1920x1080@144Hz cat /sys/kernel/debug/dri/0/DP-1/link_settings Current: 4 0x14 0 Verified: 4 0x1e 0 Reported: 4 0x1e 16 Preferred: 0 0x0 0 echo "4 0x1e" > /sys/kernel/debug/dri/0/DP-1/link_settings cat /sys/kernel/debug/dri/0/DP-1/link_settings Current: 4 0x1e 0 Verified: 4 0x1e 0 Reported: 4 0x1e 16 Preferred: 4 0x1e 0 Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: change zstate allow msg conditionEric Yang3-25/+45
[Why] PMFW message which previously thought to only control Z9 controls both Z9 and Z10. Also HW design team requested that Z9 must only be supported on eDP due to content protection interop. [How] Change zstate support condition to match updated policy Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: 3.2.145Aric Cyr1-1/+1
DC version 3.2.145 brings improvements in multiple areas. In summary, we highlight: - Code improvements for passive - Cursor manipulation enhancements - Expand debug in some areas - Fix problems in DML - Other minor code refactors Reviewed-by: Anson Jacob <Anson.Jacob@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: [FW Promotion] Release 0.0.75Anthony Koo1-23/+13
- Add reserved bits for future feature development - Fix issue with mismatch with type const - Replaced problematic code with old memcpy and casted problematic pointers to unsigned char pointers Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Refine condition for cursor visibilityKrunoslav Kovac2-3/+23
[why] There's a special case where upper plane is not the main plane. If it owns the cursor, it will be invisible in the majority of the screen. [How] The condition for disabling cursor is changed: - check if upper viewport completely covers current. This was the previous change that doesn't handle all scenarios with pipe splitting. - if not, show the cursor only if it's not scaled or no upper pipe. Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Populate dtbclk entries for dcn3.02/3.03Bindu Ramamurthy2-2/+10
[Why] Populate dtbclk values from bwparams for dcn302, dcn303. [How] dtbclk values are fetched from bandwidthparams for all DPM levels and for DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: add workaround for riommu invalidation request hangEric Yang3-0/+29
[Why] When an riommu invalidation request come at the same time as a pipe is disabled there can be a case where DCN cannot ACK the request if only one VMID is setup in the inuse list. [How] Setup a second unused VMID will work around the issue. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Line Buffer changesNevenko Stupar4-19/+10
DCN 3x increased Line buffer size for DCHUB latency hiding, from 4 lines of 4K resolution lines to 5 lines of 4K resolution lines. All Line Buffer can be used as extended memory for P State change latency hiding. The maximum number of lines is increased to 32 lines. Finally, LB_MEMORY_CONFIG_1 (LB memory piece 1) and LB_MEMORY _CONFIG_2 (LB memory piece 2) are not affected, no change in size, only 3 pieces is affected, i.e., when all 3 pieces are used in both LB_MEMORY_CONFIG_0 and LB_MEMORY_CONFIG_3 (for 4:2:0) modes. Reviewed-by: Jun Lei <jun.lei@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nevenko Stupar <Nevenko.Stupar@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Remove MALL function from DCN3.1Mikita Lipski1-1/+0
[why] DCN31 doesn't have MALL in DMUB so to avoid sending unknown commands to DMUB just remove the function pointer. [how] Remove apply_idle_power_optimizations from function pointers structure for DCN31 Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: DCN2X Prefer ODM over bottom pipe to find second pipesunglee1-4/+4
[WHY] When finding a second pipe for pipe split, currently will look for bottom pipe in context first to decide the second pipe. This causes issues in 2 plane to 1 plane transitions like fullscreen video where bottom pipe no longer exists in the new configuration. [HOW] If previous context had an ODM pipe, use that to find the secondary pipe first before looking at bottom pipe. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: sunglee <sunglee@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Only set default brightness for OLEDCamille Cho1-3/+1
[Why] We used to unconditionally set backlight path as AUX for panels capable of backlight adjustment via DPCD in set default brightness. [How] This should be limited to OLED panel only since we control backlight via PWM path for SDR mode in LCD HDR panel. Reviewed-by: Krunoslav Kovac <krunoslav.kovac@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Camille Cho <Camille.Cho@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Update bounding box for DCN3.1Nicholas Kazlauskas1-0/+1
[Why & How] We're missing a default value for dram_channel_width_bytes in the DCN3.1 SOC bounding box and we don't currently have the interface in place to query the actual value from VBIOS. Put in a hardcoded default until we have the interface in place. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Query VCO frequency from register for DCN3.1Nicholas Kazlauskas2-55/+42
[Why] Hardcoding the VCO frequency isn't correct since we don't own or control the value. In the case where the hardcode is also missing we can't lightup display. [How] Query from the CLK register instead. Update the DFS frequency to be able to compute the VCO frequency. Reviewed-by: Eric Yang <eric.yang2@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Populate socclk entries for dcn3.02/3.03Bindu Ramamurthy3-4/+14
[Why] Initialize socclk entries in bandwidth params for dcn302, dcn303. [How] Fetch the sockclk values from smu for the DPM levels and for the DPM levels where smu returns 0, previous level values are reported. Reviewed-by: Roman Li <Roman.Li@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Bindu Ramamurthy <bindu.r@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Fix max vstartup calculation for modes with bordersNicholas Kazlauskas1-2/+4
[Why] Vertical and horizontal borders in timings are treated as increasing the active area - vblank and hblank actually shrink. Our input into DML does not include these borders so it incorrectly assumes it has more time than available for vstartup and tmdl calculations for some modes with borders. An example of such a timing would be 640x480@72Hz: h_total: 832 h_border_left: 8 h_addressable: 640 h_border_right: 8 h_front_porch: 16 h_sync_width: 40 v_total: 520 v_border_top: 8 v_addressable: 480 v_border_bottom: 8 v_front_porch: 1 v_sync_width: 3 pix_clk_100hz: 315000 [How] Include borders as part of destination vactive/hactive. This change DCN20+ so it has wide impact, but the destination vactive and hactive are only really used for vstartup calculation anyway. Most modes do not have vertical or horizontal borders. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Enable eDP ILR on DCN2.1Michael Strauss1-1/+2
[WHY] Enable feature for 21.40 Reviewed-by: Sung Lee <Sung.Lee@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: 3.2.144Aric Cyr1-1/+1
Reviewed-by: Shahin Khayyer <Shahin.Khayyer@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Fix comparison error in dcn21 DMLVictor Lu1-1/+1
[why] A comparison error made it possible to not iterate through all the specified prefetch modes. [how] Correct "<" to "<=" Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Reviewed-by: Yongqiang Sun <Yongqiang.Sun@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Victor Lu <victorchengchi.lu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Fixed hardware power down bypass during headless bootJake Wang3-30/+27
[Why] During headless boot, DIG may be on which causes HW/SW discrepancies. To avoid this we power down hardware on boot if DIG is turned on. With introduction of multiple eDP, hardware power down is being bypassed under certain conditions. [How] Fixed hardware power down bypass, and ensured hardware will power down if DIG is on and seamless boot is not enabled. Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-23drm/amd/display: Add copyright notice to new filesWesley Chalmers2-0/+50
Reviewed-by: Shahin Khayyer <Shahin.Khayyer@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-07 04:33:52 +0300