summaryrefslogtreecommitdiff
path: root/drivers/gpu/drm/amd/display/dc
AgeCommit message (Collapse)AuthorFilesLines
2021-10-06drm/amd/display: Skip override for preferred link settings during link trainingGeorge Shen1-6/+0
[Why] Overriding link setting inside override_training_settings result in fallback link settings being ignored. This can potentially cause link training to always fail and consequently result in an infinite loop of link training to occur in dp_verify_link_cap during detection. [How] Since preferred link settings are already considered inside decide_link_settings, skip the check in override_training_settings to avoid infinite link training loops. Reviewed-by: Wenjing Liu <wenjing.liu@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: George Shen <george.shen@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-10-05drm/amd/display: Fix DCN3 B0 DP Alt MappingLiu, Zhan1-0/+6
[Why] DCN3 B0 has a mux, which redirects PHYC and PHYD to PHYF and PHYG. [How] Fix DIG mapping. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit 4b7786d87fb3adf3e534c4f1e4f824d8700b786b)
2021-10-05drm/amd/display: Fix B0 USB-C DP Alt modeLiu, Zhan3-2/+43
[Why] Starting from B0, along with RDPCSTX, RDPCSPIPE registers are also used. [How] Make sure RDPCSPIPE registers are programmed correctly. Reviewed-by: Charlene Liu <charlene.liu@amd.com> Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Signed-off-by: Zhan Liu <Zhan.Liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org (cherry picked from commit bdd1a21b52557ea8f61d0a5dc2f77151b576eb70)
2021-09-28drm/amd/display: Fix Display Flicker on embedded panelsPraful Swarnakar1-8/+7
[Why] ASSR is dependent on Signed PSP Verstage to enable Content Protection for eDP panels. Unsigned PSP verstage is used during development phase causing ASSR to FAIL. As a result, link training is performed with DP_PANEL_MODE_DEFAULT instead of DP_PANEL_MODE_EDP for eDP panels that causes display flicker on some panels. [How] - Do not change panel mode, if ASSR is disabled - Just report and continue to perform eDP link training with right settings further. Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com> Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
2021-09-23drm/amd/display: fix empty debug macrosArnd Bergmann1-2/+2
Using an empty macro expansion as a conditional expression produces a W=1 warning: drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c: In function 'dce_aux_transfer_with_retries': drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:775:156: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 775 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_DEFER"); | ^ drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dce_aux.c:783:155: error: suggest braces around empty body in an 'if' statement [-Werror=empty-body] 783 | "dce_aux_transfer_with_retries: AUX_RET_SUCCESS: AUX_TRANSACTION_REPLY_I2C_OVER_AUX_NACK"); | ^ Expand it to "do { } while (0)" instead to make the expression more robust and avoid the warning. Fixes: 56aca2309301 ("drm/amd/display: Add AUX I2C tracing.") Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amdgpu/display: add a proper license to dc_link_dp.cAlex Deucher1-1/+23
Was missing. Reviewed-by: Harry Wentland <harry.wentland@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Link training retry fix for abort caseMeenakshikumar Somasundaram1-3/+7
[Why] If link training is aborted, it shall be retried if sink is present. [How] Check hpd status to find out whether sink is present or not. If sink is present, then link training shall be tried again with same settings. Otherwise, link training shall be aborted. Reviewed-by: Jimmy Kizito <Jimmy.Kizito@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Meenakshikumar Somasundaram <meenakshikumar.somasundaram@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-16drm/amd/display: Get backlight from PWM if DMCU is not initializedHarry Wentland2-14/+12
On Carrizo/Stoney systems we set backlight through panel_cntl, i.e. directly via the PWM registers, if DMCU is not initialized. We always read it back through ABM registers which leads to a mismatch and forces atomic_commit to program the backlight each time. Instead make sure we use the same logic for backlight readback, i.e. read it from panel_cntl if DMCU is not initialized. We also need to remove some extraneous and incorrect calculations at the end of dce_get_16_bit_backlight_from_pwm. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1666 Cc: stable@vger.kernel.org Reviewed-by: Josip Pavic <josip.pavic@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Harry Wentland <harry.wentland@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-09-10Merge tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drmLinus Torvalds4-7/+11
Pull drm fixes from Dave Airlie: "Just an initial bunch of fixes for the merge window, amdgpu is most of them with a few ttm fixes and an fbdev avoid multiply overflow fix. core: - Make some dma-buf config options depend on DMA_SHARED_BUFFER - Handle multiplication overflow of fbdev xres/yres in the core ttm: - Fix ttm_bo_move_memcpy() when ttm_resource is subclassed - Fix ttm deadlock if target BO isn't idle - ttm build fix - ttm docs fix dma-buf: - config option fixes fbdev: - limit resolutions to avoid int overflow i915: - stddef change. amdgpu: - Misc cleanups, typo fixes - EEPROM fix - Add some new PCI IDs - Scatter/Gather display support for Yellow Carp - PCIe DPM fix for RKL platforms - RAS fix amdkfd: - SVM fix vc4: - static function fix mgag200: - fix uninit var panfrost: - lock_region fixes" * tag 'drm-next-2021-09-10' of git://anongit.freedesktop.org/drm/drm: (36 commits) drm/ttm: Fix a deadlock if the target BO is not idle during swap fbmem: don't allow too huge resolutions dma-buf: DMABUF_SYSFS_STATS should depend on DMA_SHARED_BUFFER dma-buf: DMABUF_DEBUG should depend on DMA_SHARED_BUFFER drm/i915: use linux/stddef.h due to "isystem: trim/fixup stdarg.h and other headers" dma-buf: DMABUF_MOVE_NOTIFY should depend on DMA_SHARED_BUFFER drm/amdkfd: drop process ref count when xnack disable drm/amdgpu: enable more pm sysfs under SRIOV 1-VF mode drm/amdgpu: fix fdinfo race with process exit drm/amdgpu: Fix a deadlock if previous GEM object allocation fails drm/amdgpu: stop scheduler when calling hw_fini (v2) drm/amdgpu: Clear RAS interrupt status on aldebaran drm/amd/display: Initialize lt_settings on instantiation drm/amd/display: cleanup idents after a revert drm/amd/display: Fix memory leak reported by coverity drm/ttm: Fix ttm_bo_move_memcpy() for subclassed struct ttm_resource drm/amdgpu/swsmu: fix spelling mistake "minimun" -> "minimum" drm/amdgpu: Disable PCIE_DPM on Intel RKL Platform drm/amdgpu: show both cmd id and name when psp cmd failed drm/amd/display: setup system context for APUs ...
2021-09-04Merge tag 'kbuild-v5.15' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild updates from Masahiro Yamada: - Add -s option (strict mode) to merge_config.sh to make it fail when any symbol is redefined. - Show a warning if a different compiler is used for building external modules. - Infer --target from ARCH for CC=clang to let you cross-compile the kernel without CROSS_COMPILE. - Make the integrated assembler default (LLVM_IAS=1) for CC=clang. - Add <linux/stdarg.h> to the kernel source instead of borrowing <stdarg.h> from the compiler. - Add Nick Desaulniers as a Kbuild reviewer. - Drop stale cc-option tests. - Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG to handle symbols in inline assembly. - Show a warning if 'FORCE' is missing for if_changed rules. - Various cleanups * tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits) kbuild: redo fake deps at include/ksym/*.h kbuild: clean up objtool_args slightly modpost: get the *.mod file path more simply checkkconfigsymbols.py: Fix the '--ignore' option kbuild: merge vmlinux_link() between ARCH=um and other architectures kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh kbuild: merge vmlinux_link() between the ordinary link and Clang LTO kbuild: remove stale *.symversions kbuild: remove unused quiet_cmd_update_lto_symversions gen_compile_commands: extract compiler command from a series of commands x86: remove cc-option-yn test for -mtune= arc: replace cc-option-yn uses with cc-option s390: replace cc-option-yn uses with cc-option ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild sparc: move the install rule to arch/sparc/Makefile security: remove unneeded subdir-$(CONFIG_...) kbuild: sh: remove unused install script kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y kbuild: Switch to 'f' variants of integrated assembler flag kbuild: Shuffle blank line to improve comment meaning ...
2021-08-31drm/amd/display: Initialize lt_settings on instantiationMichael Strauss1-3/+3
[WHY] lt_settings' pointers remain uninitialized but nonzero if display fails to light up with no DPCD/EDID info populated, leading to a hang on access Reviewed-by: Nicholas Kazlauskas <Nicholas.Kazlauskas@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Michael Strauss <michael.strauss@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-31drm/amd/display: cleanup idents after a revertAngus Wang1-1/+1
[WHY] The change has caused high idle memory clock speed and power consumption at some resolutions and frame rates for Navi10 [HOW] Reverted change "drm/amd/display: Fixed Intermittent blue screen on OLED panel" Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Angus Wang <angus.wang@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-31drm/amd/display: Fix memory leak reported by coverityAnson Jacob1-1/+5
Free memory allocated if any of the previous allocations failed. >>> CID 1487129: Resource leaks (RESOURCE_LEAK) >>> Variable "vpg" going out of scope leaks the storage it points to. Addresses-Coverity-ID: 1487129: ("Resource leaks") Reviewed-by: Aric Cyr <aric.cyr@amd.com> Acked-by: Mikita Lipski <mikita.lipski@amd.com> Signed-off-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-30drm:dcn31: fix boolreturn.cocci warningsJing Yangyang1-2/+2
./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:112:9-10:WARNING: return of 0/1 in function 'dcn31_is_panel_backlight_on' with return type bool ./drivers/gpu/drm/amd/display/dc/dcn31/dcn31_panel_cntl.c:122:9-10:WARNING: return of 0/1 in function 'dcn31_is_panel_powered_on' with return type bool Return statements in functions returning bool should use true/false instead of 1/0. Generated by: scripts/coccinelle/misc/boolreturn.cocci Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Jing Yangyang <jing.yangyang@zte.com.cn> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Move AllowDRAMSelfRefreshOrDRAMClockChangeInVblank to ↵Nicholas Kazlauskas3-5/+8
bounding box [Why] This is a global parameter, not a per pipe parameter and it's useful for experimenting with the prefetch schedule to be adjustable from the SOC bb. [How] Add a parameter to the SOC bb, default is the existing policy for all DCN. Fill it in when filling SOC bb parameters. Revert the policy to use MinDCFClk at the same time since that's not going to give us P-State in most cases on the spreadsheet. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Tested-by: Daniel Wheeler <Daniel.Wheeler@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Remove duplicate dml initAurabindo Pillai1-5/+0
[Why & How] DML is initialized again unnecessarily after its done conditionally. Remove the duplicate initialization Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Update bounding box states (v2)Jerry (Fangzhi) Zuo1-10/+31
[Why] Drop hardcoded dispclk, dppclk, phyclk [How] Read the corresponding values from clock table entries already populated. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Cc: stable@vger.kernel.org Signed-off-by: Jerry (Fangzhi) Zuo <Jerry.Zuo@amd.com> Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-26drm/amd/display: Update number of DCN3 clock statesAurabindo Pillai1-0/+1
[Why & How] The DCN3 SoC parameter num_states was calculated but not saved into the object. Bug: https://gitlab.freedesktop.org/drm/amd/-/issues/1403 Cc: stable@vger.kernel.org Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amd/display: Add Logging for HDMI color depth informationPraful Swarnakar1-0/+11
[Why] Recent HDMI2.0 HF1-1 V-Swing testing showed that logging deep color status helps in validation of testcase. [How] Add logging based on various color depths and pixel encoding formats. Signed-off-by: Praful Swarnakar <Praful.Swarnakar@amd.com> Reviewed-by: Hersen Wu <hersenwu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-24drm/amd/display: refactor riommu invalidation waEric Yang4-20/+1
[Why] A cleaner solution, only done once on boot. [How] Remove previous workaround and configure an extra vmid one time on boot Reviewed-by: Kazlauskas Nicholas <Nicholas.Kazlauskas@amd.com> Acked-by: Solomon Chiu <solomon.chiu@amd.com> Signed-off-by: Eric Yang <Eric.Yang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-19isystem: ship and use stdarg.hAlexey Dobriyan1-1/+1
Ship minimal stdarg.h (1 type, 4 macros) as <linux/stdarg.h>. stdarg.h is the only userspace header commonly used in the kernel. GPL 2 version of <stdarg.h> can be extracted from http://archive.debian.org/debian/pool/main/g/gcc-4.2/gcc-4.2_4.2.4.orig.tar.gz Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Ard Biesheuvel <ardb@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-08-19drm/amd/display: Use DCN30 watermark calc for DCN301Zhan Liu1-95/+1
[why] dcn301_calculate_wm_and_dl() causes flickering when external monitor is connected. This issue has been fixed before by commit 0e4c0ae59d7e ("drm/amdgpu/display: drop dcn301_calculate_wm_and_dl for now"), however part of the fix was gone after commit 2cbcb78c9ee5 ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next"). [how] Use dcn30_calculate_wm_and_dlg() instead as in the original fix. Fixes: 2cbcb78c9ee5 ("Merge tag 'amd-drm-next-5.13-2021-03-23' of https://gitlab.freedesktop.org/agd5f/linux into drm-next") Signed-off-by: Nikola Cornij <nikola.cornij@amd.com> Reviewed-by: Zhan Liu <zhan.liu@amd.com> Tested-by: Zhan Liu <zhan.liu@amd.com> Tested-by: Oliver Logush <oliver.logush@amd.com> Signed-off-by: Zhan Liu <zhan.liu@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/display: 3.2.149Aric Cyr1-1/+1
This version brings along following fixes: - Ensure DCN save init registers after VM setup - Fix multi-display support for idle opt workqueue - Use vblank control events for PSR enable/disable - Create default dc_sink when fail reading EDID under MST Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-16drm/amd/display: Ensure DCN save after VM setupJake Wang7-0/+25
[Why] DM initializes VM context after DMCUB initialization. This results in loss of DCN_VM_CONTEXT registers after z10. [How] Notify DMCUB when VM setup is complete, and have DMCUB save init registers. v2: squash in CONFIG_DRM_AMD_DC_DCN3_1 fix Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Wayne Lin <wayne.lin@amd.com> Signed-off-by: Jake Wang <haonan.wang2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-12drm/display: fix possible null-pointer dereference in dcn10_set_clock()Tuo Li1-6/+5
The variable dc->clk_mgr is checked in: if (dc->clk_mgr && dc->clk_mgr->funcs->get_clock) This indicates dc->clk_mgr can be NULL. However, it is dereferenced in: if (!dc->clk_mgr->funcs->get_clock) To fix this null-pointer dereference, check dc->clk_mgr and the function pointer dc->clk_mgr->funcs->get_clock earlier, and return if one of them is NULL. Reported-by: TOTE Robot <oslab@tsinghua.edu.cn> Signed-off-by: Tuo Li <islituo@gmail.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: use do-while-0 for DC_TRACE_LEVEL_MESSAGE()Randy Dunlap1-1/+1
Building with W=1 complains about an empty 'else' statement, so use the usual do-nothing-while-0 loop to quieten this warning. ../drivers/gpu/drm/amd/amdgpu/../display/dc/dce/dmub_psr.c:113:53: warning: suggest braces around empty body in an 'else' statement [-Wempty-body] 113 | *state, retry_count); Fixes: b30eda8d416c ("drm/amd/display: Add ETW log to dmub_psr_get_state") Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Cc: Wyatt Wood <wyatt.wood@amd.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: "Pan, Xinhui" <Xinhui.Pan@amd.com> Cc: Harry Wentland <harry.wentland@amd.com> Cc: Leo Li <sunpeng.li@amd.com> Cc: amd-gfx@lists.freedesktop.org Cc: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie> Cc: Daniel Vetter <daniel@ffwll.ch> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: 3.2.148Anthony Koo1-1/+1
This version brings along following fixes: - Fix memory allocation in dm IRQ context to use GFP_ATOMIC - Increase timeout threshold for DMCUB reset - Clear GPINT after DMCUB has reset - Add AUX I2C tracing - Fix code commenting style - Some refactoring - Remove invalid assert for ODM + MPC case Reviewed-by: Wyatt Wood <Wyatt.Wood@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Anthony Koo <Anthony.Koo@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: Add AUX I2C tracing.Ashley Thomas1-9/+183
[Why] Developers can find it useful if the driver can produce AUX traces without special equipment. [How] Add AUX tracing. Reviewed-by: Zhan Liu <zhan.liu@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Ashley Thomas <Ashley.Thomas2@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: fix incorrect CM/TF programming sequence in dwbRoy Chan1-26/+64
[How] the programming sequeune was for old asic. the correct programming sequeunce should be similar to the one used in mpc. the fix is copied from the mpc programming sequeunce. Reviewed-by: Anthony Koo <Anthony.Koo@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Roy Chan <roy.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: refactor the cursor programing codesRoy Chan1-41/+65
Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Roy Chan <roy.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: refactor the codes to centralize the stream/pipe checking logicRoy Chan1-21/+41
Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Roy Chan <roy.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: fix missing writeback disablement if plane is removedRoy Chan2-7/+19
[Why] If the plane has been removed, the writeback disablement logic doesn't run [How] fix the logic order Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Roy Chan <roy.chan@amd.com> Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-09drm/amd/display: Remove invalid assert for ODM + MPC caseEric Bernstein1-1/+0
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Anson Jacob <Anson.Jacob@amd.com> Signed-off-by: Eric Bernstein <eric.bernstein@amd.com> Cc: stable@vger.kernel.org Tested-by: Daniel Wheeler <daniel.wheeler@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Remove redundant initialization of variable eng_idColin Ian King1-1/+1
The variable eng_id is being initialized with a value that is never read, it is being re-assigned on the next statment. The assignment is redundant and can be removed. Addresses-Coverity: ("Unused value") Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: 3.2.147Aric Cyr1-1/+1
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Aric Cyr <aric.cyr@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Add DC_FP helper to check FPU stateRodrigo Siqueira2-0/+20
To fully isolate FPU operations in a single place, we must avoid situations where compilers spill FP values to registers due to FP enable in a specific C file. Note that even if we isolate all FPU functions in a single file and call its interface from other files, the compiler might enable the use of FPU before we call DC_FP_START. Nevertheless, it is the programmer's responsibility to invoke DC_FP_START/END in the correct place. To highlight situations where developers forgot to use the FP protection before calling the DC FPU interface functions, we introduce a helper that checks if the function is invoked under FP protection. If not, it will trigger a kernel warning. Changes cince V3: - Rebase Changes cince V2 (Christian): - Do not use this_cpu_* between get/put_cpu_ptr(). - In the kernel documentation, better describe restrictions. - Make dc_assert_fp_enabled trigger the ASSERT message. Changes since V1: - Remove fp_enable variables - Rename dc_is_fp_enabled to dc_assert_fp_enabled - Replace wrong variable type Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Add control mechanism for FPU utilizationRodrigo Siqueira1-2/+2
DC invokes DC_FPU_START/END in multiple parts of the code; this can create a situation where we invoke this FPU operation in a nested way or exit too early. For avoiding this situation, this commit adds a mechanism where dc_fpu_begin/end manages the access to kernel_fpu_begin/end. Change since V3: - Rebase Change since V2: - Christian: Do not use this_cpu_* between get/put_cpu_ptr(). Change since V1: - Use a better variable names - Use get_cpu_ptr and put_cpu_ptr to better balance preemption enable and disable Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Add control mechanism for FPURodrigo Siqueira2-32/+6
DC invokes DC_FPU_START/END in multiple parts of the code; this can create a situation where we invoke this FPU operation in a nested way or exit too early. For avoiding this situation, this commit adds a mechanism where dc_fpu_begin/end manages the access to kernel_fpu_begin/end. Change since V3: - Christian: Move PPC64 code to dc_fpu_begin/end. Change since V2: - Christian: Do not use this_cpu_* between get/put_cpu_ptr(). Change since V1: - Use a better variable names - Use get_cpu_ptr and put_cpu_ptr to better balance preemption enable and disable Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Move specific DCN2x code that uses FPU to DMLRodrigo Siqueira6-39/+126
The display core files rely on FPU, which requires to be compiled with special flags. Ideally, we don't want these FPU operations spread around the DC code; nevertheless, it happens in the current source. This commit introduces a new directory inside DML for centralizing shared DCN functions that require FPU and have been used outside DML. For illustrating this process of transferring FPU functions to the DML folder, this commit moves one of the functions dcn20_populate_dml_writeback_from_context) that require FPU access to a single shared file. Notice that this is the first part of the work, and it does not fix the FPU issue yet; we still need other patches for achieving the complete FPU isolation. Changes since V3: - Jun: Instead of creating a new directory to keep the FPU code, let's make the DML folder the only part that requires FPU access. Drop fpu_operation folder. - Christian: Fix function code style. Changes since V2: - Christian: Remove unnecessary wrapper. - lkp: Add missing prototype. - Only compile the FPU operations if the DCN option is enabled. Change since V1: - Update documentation and rebase. Cc: Harry Wentland <harry.wentland@amd.com> Cc: Anson Jacob <Anson.Jacob@amd.com> Cc: Christian König <christian.koenig@amd.com> Cc: Hersen Wu <hersenxs.wu@amd.com> Cc: Aric Cyr <aric.cyr@amd.com> Cc: Jun Lei <jun.lei@amd.com> Cc: Dmytro Laktyushkin <dmytro.laktyushkin@amd.com> Cc: Qingqing Zhuo <qingqing.zhuo@amd.com> Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com> Reviewed-by: Christian König <christian.koenig@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: workaround for hard hang on HPD on native DPQingqing Zhuo1-1/+3
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enable, causing DMUB to access an unresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off on native DP. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Add check for validating unsupported ODM plus MPO caseJaehyun Chung1-0/+5
[Why] We do not currently support ODM plus MPO on only one side of the screen. This unsupported case causes validation calculations to divide by zero due to invalid viewport values. [How] Add stopgap for the validation of ODM plus MPO on one side of screen case. Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Jaehyun Chung <jaehyum.chung@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Increase stutter watermark for dcn303Bing Guo1-2/+2
[Why&How] Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent underflow in certain modes. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1XBing Guo1-1/+1
Why: In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X by the number of pipes ODM Combined. How: Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the number of pipes ODM Combined. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Assume LTTPR interop for DCN31+Wesley Chalmers4-19/+40
[WHY] For DCN31 onward, LTTPR is to be enabled and set to Transparent by VBIOS. Driver is to assume that VBIOS has done this without needing to check the VBIOS interop bit. [HOW] Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the interop bit to true for DCN31+. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: workaround for hard hang on HPD on native DPQingqing Zhuo1-1/+3
[Why] HPD disable and enable sequences are not mutually exclusive on Linux. For HPDs that spans over 1s (i.e. HPD low = 1s), part of the disable sequence (specifically, a request to SMU to lower refclk) could come right before the call to PHY enable, causing DMUB to access an unresponsive PHY and thus a hard hang on the system. [How] Disable 48mhz refclk off on native DP. Reviewed-by: Hersen Wu <hersenxs.wu@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Qingqing Zhuo <qingqing.zhuo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Increase stutter watermark for dcn303Bing Guo1-2/+2
[Why&How] Hardware team suggested to use SRExitTime= 35.5us as w/a to prevent underflow in certain modes. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Fix Dynamic bpp issue with 8K30 with Navi 1XBing Guo1-1/+1
Why: In DCN2x, HW doesn't automatically divide MASTER_UPDATE_LOCK_DB_X by the number of pipes ODM Combined. How: Set MASTER_UPDATE_LOCK_DB_X to the value that is adjusted by the number of pipes ODM Combined. Reviewed-by: Martin Leung <martin.leung@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Bing Guo <bing.guo@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-06drm/amd/display: Assume LTTPR interop for DCN31+Wesley Chalmers4-19/+40
[WHY] For DCN31 onward, LTTPR is to be enabled and set to Transparent by VBIOS. Driver is to assume that VBIOS has done this without needing to check the VBIOS interop bit. [HOW] Add LTTPR enable and interop VBIOS bits into dc->caps, and force-set the interop bit to true for DCN31+. Reviewed-by: Jun Lei <Jun.Lei@amd.com> Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com> Signed-off-by: Wesley Chalmers <Wesley.Chalmers@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-08-03drm/amd/display: Fix typo in commentsCai Huoqing7-8/+8
Remove the repeated word 'the' from comments Signed-off-by: Cai Huoqing <caihuoqing@baidu.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
2021-07-30Merge tag 'amd-drm-next-5.15-2021-07-29' of ↵Dave Airlie54-526/+910
https://gitlab.freedesktop.org/agd5f/linux into drm-next amd-drm-next-5.15-2021-07-29: amdgpu: - VCN/JPEG power down sequencing fixes - Various navi pcie link handling fixes - Clockgating fixes - Yellow Carp fixes - Beige Goby fixes - Misc code cleanups - S0ix fixes - SMU i2c bus rework - EEPROM handling rework - PSP ucode handling cleanup - SMU error handling rework - AMD HDMI freesync fixes - USB PD firmware update rework - MMIO based vram access rework - Misc display fixes - Backlight fixes - Add initial Cyan Skillfish support - Overclocking fixes suspend/resume amdkfd: - Sysfs leak fix - Add counters for vm faults and migration - GPUVM TLB optimizations radeon: - Misc fixes Signed-off-by: Dave Airlie <airlied@redhat.com> From: Alex Deucher <alexander.deucher@amd.com> Link: https://patchwork.freedesktop.org/patch/msgid/20210730033455.3852-1-alexander.deucher@amd.com
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-08 09:39:19 +0300