summaryrefslogtreecommitdiff
path: root/drivers/gpio
AgeCommit message (Collapse)AuthorFilesLines
2017-01-26gpiolib: Convert fwnode_get_named_gpiod() to configure GPIOAndy Shevchenko2-6/+23
Make fwnode_get_named_gpiod() consistent with the rest of gpiod_get() like API, i.e. configure GPIO pin immediately after request. Besides obvious clean up it will help to configure pins based on firmware provided resources. Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-19gpio: provide lockdep keys for nested/unnested irqchipsLinus Walleij1-9/+9
The helper function for adding a GPIO chip compiles in a lockdep key for debugging, the same key is needed for nested chips as well. The macro construction is unreadable, replace this with two static inlines instead. The _gpiochip_irqchip_add prefixed function is not helpful, rename it with gpiochip_irqchip_add_key() that tell us what the function is actually doing. Fixes: d245b3f9bd36 ("gpio: simplify adding threaded interrupts") Cc: Roger Quadros <rogerq@ti.com> Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com> Reported-by: Roger Quadros <rogerq@ti.com> Reported-by: Grygorii Strashko <grygorii.strashko@ti.com> Tested-by: Clemens Gruber <clemens.gruber@pqgruber.com> Tested-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11gpio: mvebu: fix warning when building on 64-bitRussell King1-1/+1
Casting a pointer to an int is not portable, and provokes a compiler warning. Cast to unsigned long instead to avoid the warning. drivers/gpio/gpio-mvebu.c: In function 'mvebu_gpio_probe': drivers/gpio/gpio-mvebu.c:662:17: warning: cast from pointer to integer of different size [-Wpointer-to-int-cast] soc_variant = (int) match->data; ^ This will be needed when building gpio-mvebu for Armada 7k/8k ARM64 SoCs. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11gpio: pca953x: Add optional reset gpio controlSteve Longerbeam1-0/+9
Add optional reset-gpios pin control. If present, de-assert the specified reset gpio pin to bring the chip out of reset. v2: - Specify that reset signal to PCA953x chip is active low, in binding doc. - reorder includes in gpio-pca953x.c. - remove dev_err() on devm_gpiod_get_optional() error return. Cc: Alexandre Courbot <gnurou@gmail.com> Cc: linux-gpio@vger.kernel.org Cc: linux-kernel@vger.kernel.org Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Reviewed-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11gpio: Remove impossible checks on container_of() resultStephen Boyd1-3/+1
container_of() does pointer math on the pointer that's passed in. If it were to return a NULL pointer the value passed in would need to be perfectly offset from 0 to make that so. Remove these checks because they don't make sense. Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11gpiolib: Update documentation of struct acpi_gpio_infoAndy Shevchenko2-4/+4
It seems the code had been changed, but description left untouched. Update description of the struct acpi_gpio_info and relative comments accordingly. Fixes: commit 52044723cd27 ("ACPI / gpio: Add irq_type when a GPIO is used as an interrupt") Cc: Christophe RICARD <christophe.ricard@gmail.com> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11gpiolib: Switch to for_each_set_bit()Andy Shevchenko1-12/+6
The macro for_each_set_bit() effectively looks up to the next set bit in array of bits. Instead of open coding that switch to for_each_set_bit() in gpio_chip_set_multiple(). While here, make gpio_chip_set_multiple() non-destructive against its parameters. We are safe since all callers, i.e. gpiod_set_array_value_complex(), handle that already. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-11gpio: davinci: Remove redundant members davinci_gpio_controller stuctKeerthy1-3/+0
davinci_gpio_controller struct has set_data, in_data, clr_data members that are assigned and never used. Signed-off-by: Keerthy <j-keerthy@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-01-09gpio: devres: Use global array of gpio suffixesAndy Shevchenko1-4/+5
We have already a global array of possible GPIO suffixes. Use it here instead of another copy of them. Unfortunately this will not reduce the memory footprint, though allows to easy maintain list in only one place. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-30gpio: of: Add support for multiple GPIOs in a single GPIO hogGeert Uytterhoeven1-11/+20
When listing multiple GPIOs in the "gpios" property of a GPIO hog, only the first GPIO is affected. The user is left clueless about the dysfunctioning of the other GPIOs specified. Fix this by adding and documenting support for specifying multiple GPIOs in a single GPIO hog. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-30gpio: update my email addressJohn Crispin3-3/+3
This patch updates my email address as I no longer have access to the old one. Signed-off-by: John Crispin <john@phrozen.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-30gpio: Move freeing of GPIO hogs before numbing of the deviceGeert Uytterhoeven1-1/+1
When removing a gpiochip that uses GPIO hogging (e.g. by unloading the chip's DT overlay), a warning is printed: gpio gpiochip8: REMOVING GPIOCHIP WITH GPIOS STILL REQUESTED This happens because gpiochip_free_hogs() is called after the gdev->chip pointer is reset to NULL. Hence __gpiod_free() cannot determine the chip in use, and cannot clear flags nor call the optional chip-specific .free() callback. Move the call to gpiochip_free_hogs() up to fix this. Cc: stable@vger.kernel.org Fixes: ff2b135922992756 ("gpio: make the gpiochip a real device") Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-30gpio: mxs: remove __init annotationArnd Bergmann1-1/+1
Building with an old toolchain, I ran into this warning: WARNING: vmlinux.o(.text+0x63eef0): Section mismatch in reference from the function mxs_gpio_probe() to the function .init.text:mxs_gpio_init_gc() Clearly the annotation is wrong, since the function is called from the non-init probe, so let's remove it. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-28gpio: mockup: coding style fixesBartosz Golaszewski1-7/+4
Fix whitespace errors and arrange local variables for better readability. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-28gpio: mockup: dynamically allocate memory for chip nameBartosz Golaszewski1-3/+7
Currently the chip name buffer is allocated on the stack and the address of the buffer is passed to the gpio framework. It's invalid after probe() returns, so the sysfs label attribute displays garbage. Use devm_kasprintf() for each string instead. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-28gpio: mockup: make pins_name_start staticBartosz Golaszewski1-1/+1
This variable is not used outside this module. Make it static. Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-28gpio: rcar: Fine-grained Runtime PM supportGeert Uytterhoeven1-4/+16
Currently gpio modules are runtime-resumed at probe time. This means the gpio module will be active all the time (except during system suspend, if not configured as a wake-up source). While an R-Car Gen2 gpio module retains pins configured for output at the requested level while put in standby mode, gpio register cannot be accessed while suspended. Unfortunately pm_runtime_get_sync() cannot be called from all contexts where gpio register access is needed. Hence move the Runtime PM handling from probe/remove time to gpio request/free time, which is probably the best we can do. On r8a7791/koelsch, gpio modules 0, 1, 3, and 4 are now suspended during normal use (gpio2 is used for LEDs and regulators, gpio5 for keys, gpio6 for SD-Card CD & WP, gpio7 for keys and regulators). Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> [Niklas: s/gpio_to_priv(chip)/gpiochip_get_data(chip)/] Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-28gpio: rcar: set IRQ chip parent_deviceNiklas Söderlund1-0/+1
This enables Runtime PM handling for interrupts. By setting the parent_device in struct irq_chip genirq will call the pm_runtime_get/put APIs when an IRQ is requested/freed. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-19Merge tag 'mfd-for-linus-4.10' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd Pull MFD updates from Lee Jones: "New Device Support - Add support for Ricoh RC5T619 PMIC to rn5t618 - Add support for PM8821 PMIC to qcom-pm8xxx New Functionality: - Add support for GPIO to lpc_ich - Add support for GPADC to sun4i - Add ability for rk808 to shutdown Fix-ups: - Simplify/strip unnecessary code; tps65218, palmas, tps65217 - Device Tree binding updates; tps65218, altera-a10sr - Provide/export device ID info; tps65218, axp20x-i2c, hi655x-pmic, fsl-imx25-tsadc, intel_soc_pmic_bxtwc - Use MFD API instead of of_platform_populate(); tps65218 - Generalise name-space; pm8xxx - Supply/edit regmap configuration; axp20x, cs47l24-tables, axp20x - Enable compile testing; max77620, max77686, exynos-lpass, abx500-core - Coding style issues; wm8994-core, wm5102-tables - Supply endian support; syscon - Remove module support; ab3100-core, ab8500-debugfs, ab8500-gpadc, abx500-core Bug Fixes: - Fix ordering issues; wm8994 - Fix dependencies (build-time/run-time); exynos_lpass, sun4i-gpadc - Fix compiler warnings; sun4i-gpadc - Fix leaks; mfd-core - Fix page fault during module unload; tps65217" * tag 'mfd-for-linus-4.10' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (49 commits) mfd: tps65217: Support an interrupt pin as the system wakeup mfd: tps65217: Make an interrupt handler simpler mfd: tps65217: Update register interrupt mask bits instead of writing operation mfd: tps65217: Specify the IRQ name mfd: tps65217: Fix page fault on unloading modules mfd: palmas: Remove redundant check in palmas_power_off mfd: arizona: Disable IRQs during driver remove mfd: pm8xxx: add support to pm8821 mfd: intel-lpss: Try to enable Memory-Write-Invalidate mfd: rn5t618: Add Ricoh RC5T619 PMIC support mfd: axp20x: Add address extension registers for AXP806 regmap mfd: intel_soc_pmic_bxtwc: Fix a typo in MODULE_DEVICE_TABLE() mfd: core: Fix device reference leak in mfd_clone_cell mfd: bcm590xx: Simplify a test mfd: sun4i-gpadc: Select regmap-irq mfd: abx500-core: drop unused MODULE_ tags from non-modular code mfd: ab8500: make sysctrl explicitly non-modular mfd: ab8500-gpadc: Make it explicitly non-modular mfd: ab8500-debugfs: Make it explicitly non-modular mfd: ab8500-core: Make it explicitly non-modular ...
2016-12-13Merge tag 'gpio-v4.10-1' of ↵Linus Torvalds31-1152/+670
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio Pull GPIO updates from Luinus Walleij: "Bulk GPIO changes for the v4.10 kernel cycle: Core changes: - Simplify threaded interrupt handling: instead of passing numbed parameters to gpiochip_irqchip_add_chained() we create a new call: gpiochip_irqchip_add_nested() so the two types are clearly semantically different. Also make sure that all nested chips call gpiochip_set_nested_irqchip() which is necessary for IRQ resend to work properly if it happens. - Return error on seek operations for the chardev. - Clamp values set as part of gpio[d]_direction_output() so that anything != 0 will be send down to the driver as "1" not the value passed in. - ACPI can now support naming of GPIO lines, hogs and holes in the GPIO lists. New drivers: - The SX150x driver was deemed unfit for the GPIO subsystem and was moved over to a combined GPIO+pinctrl driver in the pinctrl subsystem. New features: - Various cleanups to various drivers" * tag 'gpio-v4.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (49 commits) gpio: merrifield: Implement gpio_get_direction callback gpio: merrifield: Add support for hardware debouncer gpio: chardev: Return error for seek operations gpio: arizona: Tidy up probe error path gpio: arizona: Remove pointless set of platform drvdata gpio: pl061: delete platform data handling gpio: pl061: move platform data into driver gpio: pl061: rename variable from chip to pl061 gpio: pl061: rename state container struct gpio: pl061: use local state for parent IRQ storage gpio: set explicit nesting on drivers gpio: simplify adding threaded interrupts gpio: vf610: use builtin_platform_driver gpio: axp209: use correct register for GPIO input status gpio: stmpe: fix interrupt handling bug gpio: em: depnd on ARCH_SHMOBILE gpio: zx: depend on ARCH_ZX gpio: x86: update config dependencies for x86 specific hardware gpio: mb86s7x: use builtin_platform_driver gpio: etraxfs: use builtin_platform_driver ...
2016-12-07Merge branch 'thread-irq-simpler' into develLinus Walleij11-72/+117
2016-12-07Merge branch 'pl061' into develLinus Walleij1-114/+94
2016-12-07gpio: merrifield: Implement gpio_get_direction callbackAndy Shevchenko1-0/+9
Implement gpio_get_direction() callback for Intel Merrifield GPIO. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: merrifield: Add support for hardware debouncerAndy Shevchenko1-0/+22
By default all pins are configured to use a glitch filter. Writing 1 to the certain bit of the specific register might be useful in case someone needs to bypass the glitch filter completely for a given GPIO pin. This patch adds support for that in the Intel Merrifield GPIO driver. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: chardev: Return error for seek operationsLars-Peter Clausen1-2/+3
The GPIO chardev is used for management tasks (allocating line and event handles) and does neither support read() nor write() operations. Hence it does not make much sense to allow seek operations. Currently the chardev uses noop_llseek() for its seek implementation. This function does not move the pointer and simply returns the current position (always 0 for the GPIO chardev). noop_llseek() is primarily meant for devices that can not support seek, but where there might be a user that depends on the seek() operation succeeding. For newly added devices that can not support seek operations it is recommended to use no_llseek(), which will return an error. For more information see commit 6038f373a3dc ("llseek: automatically add .llseek fop"). Unfortunately this was overlooked when the GPIO chardev ABI was introduced. But it is highly unlikely that since then userspace applications have appeared that rely on being able to perform non-failing seek operations on a GPIO chardev file descriptor. So it should be safe to change from noop_llseel() to no_seek(). Also use nonseekable_open() in the chardev open() callback to clear the FMODE_SEEK, FMODE_PREAD and FMODE_PWRITE flags from the file. Neither of these should be set on a file that does not support seek operations. Cc: stable@vger.kernel.org Fixes: 3c702e9987e2 ("gpio: add a userspace chardev ABI for GPIOs") Signed-off-by: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: arizona: Tidy up probe error pathCharles Keepax1-5/+2
There is some unnecessary complexity in the error path which now things are converted to devm is actually very simple. This patch simplifies things. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: arizona: Remove pointless set of platform drvdataCharles Keepax1-2/+0
We use the gpio chip private data in all the callbacks so remove this redundant line of code. Signed-off-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: pl061: delete platform data handlingLinus Walleij1-38/+3
Platform data is a remnant of board files and all boards using the PL061 have been migrated to use device tree or ACPI instead. The custom mechanism to set line by default as inputs/outputs has been superceded by the GPIO-internal hogging mechanism. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: pl061: move platform data into driverLinus Walleij1-1/+13
No boardfile defines any PL061 platform data anymore: the Integrator IM/PD-1 includes the file but is not making use of the struct. Let's delete the include and all references, then move the platform data into the driver for later consolidation into the driver state container. The only resource defined by the IM/PD-1 is the IRQ which is passed through the AMBA PrimeCell bus abstraction struct amba_device. Cc: arm@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org Cc: Russell King <linux@armlinux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: pl061: rename variable from chip to pl061Linus Walleij1-93/+93
Rename the local variable "chip" referring to the struct pl061 state container to "pl061": we already have gpio_chip and irq_chip in the driver, we are needlessly adding yet another "chip" to the confusion. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: pl061: rename state container structLinus Walleij1-15/+15
The PL061 state container is named "pl061_gpio", let's rename it to simply pl061. Less is more. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-12-07gpio: pl061: use local state for parent IRQ storageLinus Walleij1-1/+4
The driver is poking around in the struct gpio_chip internals, which is a no-no. Use a variable in the local state container. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-25gpio: set explicit nesting on driversLinus Walleij3-0/+6
The ADNP, CrystalCove and WhiskeyCove are all nested GPIO irqchips, but were avoiding to connect the parent IRQ to the gpiochip. This works, but is kind of sloppy as the child IRQs are not marked as having the parent IRQ as parent. Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com> Cc: Bin Gao <bin.gao@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-25gpio: simplify adding threaded interruptsLinus Walleij11-72/+111
This tries to simplify the use of CONFIG_GPIOLIB_IRQCHIP when using threaded interrupts: add a new call gpiochip_irqchip_add_nested() to indicate that we're dealing with a nested rather than a chained irqchip, then create a separate gpiochip_set_nested_irqchip() to mirror the gpiochip_set_chained_irqchip() call to connect the parent and child interrupts. In the nested case gpiochip_set_nested_irqchip() does nothing more than call irq_set_parent() on each valid child interrupt, which has little semantic effect in the kernel, but this is probably still formally correct. Update all drivers using nested interrupts to use gpiochip_irqchip_add_nested() so we can now see clearly which these users are. The DLN2 driver can drop its specific hack with .irq_not_threaded as we now recognize whether a chip is threaded or not from its use of gpiochip_irqchip_add_nested() signature rather than from inspecting .can_sleep. We rename the .irq_parent to .irq_chained_parent since this parent IRQ is only really kept around for the chained interrupt handlers. Cc: Lars Poeschel <poeschel@lemonage.de> Cc: Octavian Purdila <octavian.purdila@intel.com> Cc: Daniel Baluta <daniel.baluta@intel.com> Cc: Bin Gao <bin.gao@linux.intel.com> Cc: Mika Westerberg <mika.westerberg@linux.intel.com> Cc: Ajay Thomas <ajay.thomas.david.rajamanickam@intel.com> Cc: Semen Protsenko <semen.protsenko@globallogic.com> Cc: Alexander Stein <alexander.stein@systec-electronic.com> Cc: Phil Reid <preid@electromag.com.au> Cc: Bartosz Golaszewski <bgolaszewski@baylibre.com> Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-24gpio: vf610: use builtin_platform_driverGeliang Tang1-5/+1
Use builtin_platform_driver() helper to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-24gpio: axp209: use correct register for GPIO input statusQuentin Schulz1-6/+2
The GPIO input status was read from control register (AXP20X_GPIO[210]_CTRL) instead of status register (AXP20X_GPIO20_SS). Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-24gpio: stmpe: fix interrupt handling bugLinus Walleij1-1/+1
commit 43db289d00c6 ("gpio: stmpe: Rework registers access") reworked the STMPE register access so as to use [STMPE_IDX_*_LSB + i] to access the 8bit register for a certain bank, assuming the CSB and MSB will follow after the enumerator. For this to work the index needs to go from (size-1) to 0 not 0 to (size-1). However for the GPIO IRQ handler, the status registers we read register MSB + 3 bytes ahead for the 24 bit GPIOs and index registers from MSB upwards and run an index i over the registers UNLESS we are STMPE1600. This is not working when we get to clearing the interrupt EDGE status register STMPE_IDX_GPEDR_[LCM]SB: it is indexed like all other registers [STMPE_IDX_*_LSB + i] but in this loop we index from 0 to get the right bank index for the calculations, and we need to just add i to the MSB. Before this, interrupts on the STMPE2401 were broken, this patch fixes it so it works again. Cc: stable@vger.kernel.org Cc: Patrice Chotard <patrice.chotard@st.com> Fixes: 43db289d00c6 ("gpio: stmpe: Rework registers access") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-24gpio: em: depnd on ARCH_SHMOBILEPeter Robinson1-1/+1
The GPIO_EM is part of the Renesas SoCs so depend on the arch. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> [Changed to depend on ARCH_EMEV2] Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-22gpio: zx: depend on ARCH_ZXPeter Robinson1-0/+1
Set GPIO_ZX to depend on ARCH_ZX as it's SOC specific. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-22gpio: x86: update config dependencies for x86 specific hardwarePeter Robinson1-5/+8
The devices here are specific to x86 so lets depend on x86. Signed-off-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-22gpio: mb86s7x: use builtin_platform_driverGeliang Tang1-5/+1
Use builtin_platform_driver() helper to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-22gpio: etraxfs: use builtin_platform_driverGeliang Tang1-6/+1
Use builtin_platform_driver() helper to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-16gpio: max77620: add compatible string to device id listVenkat Reddy Talla1-0/+1
Adding max20024 compatible string to the device id list to support both max77620 and max20024 devices. Signed-off-by: Venkat Reddy Talla <vreddytalla@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-16gpio: Remove GPIO_DEVRES optionKeno Fischer2-5/+1
This option was added in 6a89a314ab107a12af08c71420c19a37a30fc2d3 to allow use of the devm_gpio_* functions without CONFIG_GPIOLIB. However, only a few months later in b69ac52449c658b7ac40034dc3c5f5f4a71a723d, CONFIG_GPIOLIB was added as a dependency, defeating the original purpose of this option. Instead of that patch, the original commit could have just been reverted (and in fact was partially so in 403c1d0be5ccbd750d25c59d8358843a81e52e3b). Further, since this option has a dependency on HAS_IOMEM, even though it does not require it, it causes build failures when !HAS_IOMEM (e.g. in a uml build). Fix that by completely removing the option, in essence completing the reversion of the original commit. Signed-off-by: Keno Fischer <keno@juliacomputing.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-15gpio: intel-mid: use builtin_pci_driverGeliang Tang1-6/+1
Use builtin_pci_driver() helper to simplify the code. Signed-off-by: Geliang Tang <geliangtang@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-15gpio: tc3589x: fix up .get_direction()Linus Walleij1-1/+1
The bit in the TC3589x direction register is 0 for input and 1 for output, but the gpiolib expects the reverse. Fix up the logic. Cc: stable@vger.kernel.org Fixes: 14063d71e5e6 ("gpio: tc3589x: add .get_direction() and small cleanup") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-15gpio: tag line labels used for interruptsLinus Walleij1-2/+18
When a GPIO line is marked as used for an interrupt, it is helpful to set the label to "interrupt" so we know what is going on when inspecting the lines. If a GPIO is already properly named by gpiod_get*() we don't need to do this. It only happens when a line is used from the irqchip side of a GPIO driver without communicating with the GPIO side, such as when gpiochip is used as interrupt provider in the device tree. If the line is still marked as used by "interrupt" when we unmark it as used by an interrupt, also remove this label from the descriptor. Also shape up the code around unmarking IRQ lines. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-15gpio: clamp values on gpio[d]_direction_output()Linus Walleij1-5/+8
I saw weird values != [0,1] being passed down to drivers in their .set_direction_output() callbacks. Go over the gpiolib and make sure to hammer it to [0,1] before hitting the driver to avoid undesired side effects. Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-15gpio: do not double-check direction on sleeping chipsLinus Walleij1-2/+5
When locking a GPIO line as IRQ, we go to lengths to double-check that the line is really set as input before marking it as used for IRQ. This is not good on GPIO chips that can sleep, because this function is called in IRQ-safe context. Just skip this if it can't be checked quickly. Currently this happens on sleeping expanders such as STMPE or TC3589x: BUG: scheduling while atomic: swapper/1/0x00000002 Modules linked in: CPU: 0 PID: 1 Comm: swapper Not tainted 4.9.0-rc1+ #38 Hardware name: Nomadik STn8815 [<c000f2e0>] (unwind_backtrace) from [<c000d244>] (show_stack+0x10/0x14) [<c000d244>] (show_stack) from [<c0037b78>] (__schedule_bug+0x54/0x80) [<c0037b78>] (__schedule_bug) from [<c042df14>] (__schedule+0x3a0/0x460) [<c042df14>] (__schedule) from [<c042e028>] (schedule+0x54/0xb8) (...) This patch fixes that problem and relies on the direction read from the chip when it was added. Cc: stable@vger.kernel.org Fixes: 9c10280d85c1 ("gpio: flush direction status in gpiochip_lock_as_irq()") Cc: Patrice Chotard <patrice.chotard@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-11-13gpio: htc-egpio: read output value from cacheLinus Walleij1-4/+8
When the hardware is in output mode, reading the value from the hardware is not giving the correct value back. Instead read the value from the cache so we get the right value. Suggested-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-02 13:28:41 +0300