summaryrefslogtreecommitdiff
path: root/drivers/gpio/gpio-zynq.c
AgeCommit message (Collapse)AuthorFilesLines
2021-08-12gpio: Bulk conversion to generic_handle_domain_irq()Marc Zyngier1-6/+2
Wherever possible, replace constructs that match either generic_handle_irq(irq_find_mapping()) or generic_handle_irq(irq_linear_revmap()) to a single call to generic_handle_domain_irq(). Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Marc Zyngier <maz@kernel.org>
2021-06-14gpio: zynq: Check return value of irq_get_irq_dataSrinivas Neeli1-0/+10
In two different instances the return value of "irq_get_irq_data" API was neither captured nor checked. Fixed it by capturing the return value and then checking for any error. Addresses-Coverity: "returned_null" Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-06-14gpio: zynq: Check return value of pm_runtime_get_syncSrinivas Neeli1-1/+4
Return value of "pm_runtime_get_sync" API was neither captured nor checked. Fixed it by capturing the return value and then checking for any warning. Addresses-Coverity: "check_return" Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2021-06-14gpio: zynq: use module_platform_driver to simplify the codeSrinivas Neeli1-16/+1
module_platform_driver() makes the code simpler by eliminating boilerplate code. Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-12-02gpio: zynq: fix reference leak in zynq_gpio functionsQinglang Miao1-2/+2
pm_runtime_get_sync will increment pm usage counter even it failed. Forgetting to putting operation will result in a reference leak here. A new function pm_runtime_resume_and_get is introduced in [0] to keep usage counter balanced. So We fix the reference leak by replacing it with new funtion. [0] dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter") Fixes: c2df3de0d07e ("gpio: zynq: properly support runtime PM for GPIO used as interrupts") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Qinglang Miao <miaoqinglang@huawei.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-08-28gpio: zynq: Simplify with dev_err_probe()Krzysztof Kozlowski1-5/+3
Common pattern of handling deferred probe can be simplified with dev_err_probe(). Less code and also it prints the error value. Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-24gpio: zynq: Remove error prints in EPROBE_DEFERShubhrajyoti Datta1-1/+2
In case of probe is deferred do not print the errors. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-24gpio: zynq: Add pmc gpio supportShubhrajyoti Datta1-0/+16
Add PMC gpio support. Only bank 0,1, 3 and 4 are connected to the multiplexed Input output pins. Bank 0 and 1 to mio and bank 3 and 4 to extended multiplexed input output pins. Versal devices are the industry's first adaptive compute acceleration platforms. https://www.xilinx.com/support/documentation/data_sheets/ds950-versal-overview.pdf On the Versal platform, we are using two customized GPIO controllers(IP) which were used in Zynq/ZynqMp platform. One of them present in the Platform Management Controller(PMC) block and other in Processing System(PS) block. In PMC_GPIO only Bank0,1,3 & 4 are enabled and in PS_GPIO only Bank 0 & 3 are enabled. You can find more details of GPIO IP in ZynqMP TRM General Purpose I/O(Chapter-27). https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-24gpio: zynq: Disable the irq if it is not a wakeup sourceShubhrajyoti Datta1-0/+8
If gpio is not set to wake disable the interrupt. ATF set all slaves with enabled interrupts as wakeup sources and if gpio is used in r5 then it wakes up linux. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-24gpio: zynq: Add Versal supportShubhrajyoti Datta1-1/+27
Add Versal support in gpio. Only bank 0 and 3 are connected to the Multiplexed Input output pins. Bank 0 to mio and bank3 to fabric Multiplexed input output pins. Versal devices are the industry's first adaptive compute acceleration platforms. https://www.xilinx.com/support/documentation/data_sheets/ds950-versal-overview.pdf On the Versal platform, we are using two customized GPIO controllers(IP) which were used in Zynq/ZynqMp platform. One of them present in the Platform Management Controller(PMC) block and other in Processing System(PS) block. In PMC_GPIO only Bank0,1,3 & 4 are enabled and in PS_GPIO only Bank 0 & 3 are enabled. You can find more details of GPIO IP in ZynqMP TRM General Purpose I/O(Chapter-27). https://www.xilinx.com/support/documentation/user_guides/ug1085-zynq-ultrascale-trm.pdf Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-06-24gpio: zynq: protect direction in/out with a spinlockGlenn Langedock1-0/+11
Fix race condition when changing the direction (in/out) of the GPIO pin. The read-modify-write sequence (as coded in the driver) isn't atomic and requires synchronization (spinlock). Signed-off-by: Glenn Langedock <Glenn.Langedock@barco.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
2020-01-07gpio: zynq: Fix for bug in zynq_gpio_restore_context APISwapna Manupati1-3/+5
This patch writes the inverse value of Interrupt Mask Status register into the Interrupt Enable register in zynq_gpio_restore_context API to fix the bug. Fixes: e11de4de28c0 ("gpio: zynq: Add support for suspend resume") Signed-off-by: Swapna Manupati <swapna.manupati@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Srinivas Neeli <srinivas.neeli@xilinx.com> Link: https://lore.kernel.org/r/1577362338-28744-2-git-send-email-srinivas.neeli@xilinx.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-11-07gpio: Use new GPIO_LINE_DIRECTIONMatti Vaittinen1-2/+5
It's hard for occasional GPIO code reader/writer to know if values 0/1 equal to IN or OUT. Use defined GPIO_LINE_DIRECTION_IN and GPIO_LINE_DIRECTION_OUT to help them out. NOTE - for gpio-amd-fch and gpio-bd9571mwv: This commit also changes the return value for direction get to equal 1 for direction INPUT. Prior this commit these drivers might have returned some other positive value but 1 for INPUT. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> Acked-by: Scott Branden <scott.branden@broadcom.com> Reviewed-by: Grygorii Strashko <grygorii.strashko@ti.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> Acked-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-08-27gpio: zynq: Pass irqchip when adding gpiochipLinus Walleij1-16/+21
We need to convert all old gpio irqchips to pass the irqchip setup along when adding the gpio_chip. For more info see drivers/gpio/TODO. For chained irqchips this is a pretty straight-forward conversion. Cc: Michal Simek <michal.simek@xilinx.com> Cc: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Cc: Thierry Reding <treding@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20190809132649.25176-1-linus.walleij@linaro.org
2019-08-05gpio: Remove dev_err() usage after platform_get_irq()Stephen Boyd1-3/+1
We don't need dev_err() messages when platform_get_irq() fails now that platform_get_irq() prints an error message itself when something goes wrong. Let's remove these prints with a simple semantic patch. // <smpl> @@ expression ret; struct platform_device *E; @@ ret = ( platform_get_irq(E, ...) | platform_get_irq_byname(E, ...) ); if ( \( ret < 0 \| ret <= 0 \) ) { ( -if (ret != -EPROBE_DEFER) -{ ... -dev_err(...); -... } | ... -dev_err(...); ) ... } // </smpl> While we're here, remove braces on if statements that only have one statement (manually). Cc: linux-gpio@vger.kernel.org Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Stephen Boyd <swboyd@chromium.org> Link: https://lore.kernel.org/r/20190730181557.90391-16-swboyd@chromium.org Acked-by: Bartosz Golaszewski <bgolaszewski@baylibre.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-05-30treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 152Thomas Gleixner1-5/+1
Based on 1 normalized pattern(s): this program is free software you can redistribute it and or modify it under the terms of the gnu general public license as published by the free software foundation either version 2 of the license or at your option any later version extracted by the scancode license scanner the SPDX license identifier GPL-2.0-or-later has been chosen to replace the boilerplate/reference in 3029 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190527070032.746973796@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-04-04gpio: zynq: use devm_platform_ioremap_resource()Enrico Weigelt, metux IT consult1-3/+1
Use the new helper that wraps the calls to platform_get_resource() and devm_ioremap_resource() together. Signed-off-by: Enrico Weigelt, metux IT consult <info@metux.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2019-02-13gpio: zynq: properly support runtime PM for GPIO used as interruptsThomas Petazzoni1-0/+24
The Zynq GPIO driver currently implements runtime PM by: - Enabling runtime PM support in ->probe() and letting the runtime PM reference counter drop to zero at the end of ->probe(). - Increasing the runtime PM reference counter in ->request() and decreasing it in ->free(). However, the latter is not sufficient: when a GPIO is used as an interrupt, ->request() and ->free() are not called. Due to this, the runtime PM counter remains to zero when the only GPIOs in use are used as interrupts, causing them to simply not work. To address this problem, this commit implement the ->irq_request_resources() and ->irq_release_resources() hooks, ensuring that the runtime PM counter is properly incremented/decremented. Since we override the default hooks, we keep the existing behavior by making sure they call gpiochip_reqres_irq() / gpiochip_relres_irq() respectively. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com> Reviewed-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-12-07gpio: zynq: Report gpio direction at bootBrandon Maier1-0/+23
The Zynq's gpios can be configured by the bootloader. But Linux will erroneously report all gpios as inputs unless we implement get_direction(). Signed-off-by: Brandon Maier <Brandon.Maier@collins.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-11-05gpio: gpio-zynq: simplify getting .driver_dataWolfram Sang1-4/+2
We should get 'driver_data' from 'struct device' directly. Going via platform_device is an unneeded step back and forth. Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: zynq: Setup chip->base based on alias IDMichal Simek1-1/+1
In past Xilinx gpio-zynq driver was setting up gpio chip->base as 0 which was chagned to autodetection when driver was upstreamed. Older systems, which were using this old version, setup SW stack which expects zynq gpio base as 0 and right now there is no way how to set this up. The patch is adding an option to setup chip->base based on aliases which is something what some other drivers are doing too. It means when gpio0 alias is setup then chip->base is 0. When gpio alias is not setup gpiochip_find_base() set it up properly which is current behavior. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: zynq: simplifly getting drvdataShubhrajyoti Datta1-4/+2
Get the driver data directly by dev_get_drvdata. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2018-05-23gpio: zynq: Remove call to platform_get_irqShubhrajyoti Datta1-4/+2
Remove the call to platform_get_irq use the cached one instead. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Reviewed-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-11-08gpio: Move irqdomain into struct gpio_irq_chipThierry Reding1-1/+1
In order to consolidate the multiple ways to associate an IRQ chip with a GPIO chip, move more fields into the new struct gpio_irq_chip. Signed-off-by: Thierry Reding <treding@nvidia.com> Acked-by: Grygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: zynq: Fix driver function parameters alignmentMichal Simek1-8/+9
Fix function parameters alignment reported by checkpatch. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: zynq: Fix warnings in the driverNava kishore Manne1-6/+6
This patch fixes the below warning -->Block comments should align the * on each line. -->suspect code indent for conditional statements. -->Prefer 'unsigned int' to bare use of 'unsigned' Signed-off-by: Nava kishore Manne <navam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: zynq: Fix empty lines in driverMichal Simek1-1/+2
Remove one additional line and add two new. All are reported by checkpatch. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: zynq: Fix kernel doc warningsNava kishore Manne1-2/+3
This patch fixes the kernel doc warnings in the driver. Signed-off-by: Nava kishore Manne <navam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: zynq: Provided workaround for GPIOSwapna Manupati1-4/+37
This patch provides workaround in the gpio driver for Zynq and ZynqMP Platforms by reading pin value of EMIO banks through DATA register as it was unable to read the value of it from DATA_RO register. Signed-off-by: Swapna Manupati <swapnam@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-08-14gpio: zynq: Add support for suspend resumeShubhrajyoti Datta1-3/+79
Add support for suspend resume. Now that we can lose context across a suspend/ resume cycle. Add support for the context restore. Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-06-16gpio: zynq: Clarify quirk and provide helper functionSoren Brinkmann1-6/+15
The one quirk used in the zynq GPIO driver was called FOO which is not very descriptive. Rename the quirk to IS_ZYNQ as it indicates whether the HW is a zynq or zynqmp device to allow handling of device-specific differences of the HW. Also provide a helper function to test whether the HW is zynq or zynqmp. Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2017-05-22gpio: zynq: remove unneeded (void *) casts in of_match_tableMasahiro Yamada1-3/+2
of_device_id::data is an opaque pointer. No explicit cast is needed. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-09-23gpio: Added zynq specific check for special pins on bank zeroNava kishore Manne1-2/+13
This patch adds zynq specific check for bank 0 pins 7 and 8 are special and cannot be used as inputs Signed-off-by: Nava kishore Manne <navam@xilinx.com> Reported-by: Jonas Karlsson <Jonas.d.karlsson@gmail.com> Acked-by: Sören Brinkmann <soren.brinkmann@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-06-08gpio: zynq: initialize clock even without CONFIG_PMHelmut Grohne1-0/+7
When the PM initialization was moved in the commit referenced below, the code enabling the clock was removed from the probe function. On CONFIG_PM=y kernels, this is not a problem as the pm resume hook enables the clock, but when power management is disabled, all those pm_* functions are noops and the clock is never enabled resulting in a dysfunctional gpio controller. Put the clock initialization back to support CONFIG_PM=n. Cc: stable@vger.kernel.org Signed-off-by: Helmut Grohne <h.grohne@intenta.de> Fixes: 3773c195d387 ("gpio: zynq: Do PM initialization earlier to support gpio hogs") Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-04-09gpio: zynq: Fix the error pathShubhrajyoti Datta1-1/+3
pm_runtime_disable is called only in remove it is missed out in the error path. Fix the same. Signed-off-by: Shubhrajyoti Datta <shubhraj@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2016-01-05gpio: zynq: use gpiochip data pointerLinus Walleij1-16/+11
This makes the driver use the data pointer added to the gpio_chip to store a pointer to the state container instead of relying on container_of(). Cc: Michal Simek <michal.simek@xilinx.com> Cc: Sören Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-12-14gpio: zynq: Do PM initialization earlier to support gpio hogsMichal Simek1-10/+9
GPIO hogs registration is call at the end of gpiochip_add() function. Calling sequence is: gpiochip_add -> of_gpiochip_add -> of_gpiochip_scan_hogs -> gpiod_hog -> gpiochip_request_own_desc -> __gpiod_request -> chip->request -> zynq_gpio_request which calls pm_runtime_get_sync() which returns -13 because PM is not initialized yet. Initialize PM before gpiochip_add is called to fix this issue. Signed-off-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-11-19gpio: change member .dev to .parentLinus Walleij1-3/+3
The name .dev in a struct is normally reserved for a struct device that is let us say a superclass to the thing described by the struct. struct gpio_chip stands out by confusingly using a struct device *dev to point to the parent device (such as a platform_device) that represents the hardware. As we want to give gpio_chip:s real devices, this is not working. We need to rename this member to parent. This was done by two coccinelle scripts, I guess it is possible to combine them into one, but I don't know such stuff. They look like this: @@ struct gpio_chip *var; @@ -var->dev +var->parent and: @@ struct gpio_chip var; @@ -var.dev +var.parent and: @@ struct bgpio_chip *var; @@ -var->gc.dev +var->gc.parent Plus a few instances of bgpio that I couldn't figure out how to teach Coccinelle to rewrite. This patch hits all over the place, but I *strongly* prefer this solution to any piecemal approaches that just exercise patch mechanics all over the place. It mainly hits drivers/gpio and drivers/pinctrl which is my own backyard anyway. Cc: Haavard Skinnemoen <hskinnemoen@gmail.com> Cc: Rafał Miłecki <zajec5@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Mauro Carvalho Chehab <mchehab@osg.samsung.com> Cc: Alek Du <alek.du@intel.com> Cc: Jaroslav Kysela <perex@perex.cz> Cc: Takashi Iwai <tiwai@suse.com> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Acked-by: Lee Jones <lee.jones@linaro.org> Acked-by: Jiri Kosina <jkosina@suse.cz> Acked-by: Hans-Christian Egtvedt <egtvedt@samfundet.no> Acked-by: Jacek Anaszewski <j.anaszewski@samsung.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-10-02gpio: zynq: use container_of() to get state containerLinus Walleij1-10/+22
The state container of the Zynq GPIO driver is sometimes extracted from the gpio_chip exploiting the fact that offsetof() the struct gpio_chip inside the struct zynq_gpio is 0, so the container_of() is in practice a noop. However if a member is added to struct zynq_gpio in front of struct gpio_chip, things will break. Using proper container_of() avoids this problem. Semantically this is a noop, the compiler will optimize it away, but syntactically it makes me happier. Also replace some explicit container_of() calls with the helper function. Cc: Lars-Peter Clausen <lars@metafoo.de> Cc: Ezra Savard <ezra.savard@xilinx.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Harini Katakam <harinik@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-09-16genirq: Remove irq argument from irq flow handlersThomas Gleixner1-1/+1
Most interrupt flow handlers do not use the irq argument. Those few which use it can retrieve the irq number from the irq descriptor. Remove the argument. Search and replace was done with coccinelle and some extra helper scripts around it. Thanks to Julia for her help! Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Cc: Jiang Liu <jiang.liu@linux.intel.com>
2015-08-13Merge tag 'v4.2-rc4' into develLinus Walleij1-0/+1
Linux 4.2-rc4
2015-07-17Merge branch 'queue/irq/gpio' of ↵Linus Walleij1-3/+3
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into devel
2015-07-16gpio: zynq: Fix problem with unbalanced pm_runtime_enableMichal Simek1-0/+1
Add missing pm_runtime_disabled to remove(). Error log: root@zynqmp:~# modprobe gpio_zynq root@zynqmp:~# lsmod Not tainted gpio_zynq 7086 0 - Live 0xffffffbffc00a000 root@zynqmp:~# rmmod gpio_zynq root@zynqmp:~# lsmod Not tainted root@zynqmp:~# modprobe gpio_zynq [ 246.924438] zynq-gpio ff0a0000.gpio: Unbalanced pm_runtime_enable! root@zynqmp:~# rmmod gpio_zynq root@zynqmp:~# lsmod Not tainted Signed-off-by: Michal Simek <michal.simek@xilinx.com> Reviewed-by: Alexandre Courbot <acourbot@nvidia.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-16gpio: zynq: add missing module_exit functionMasahiro Yamada1-0/+6
This driver is tristate, so it should be cleanable. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> Tested-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-07-14gpio: Use irq_desc_get_xxx() to avoid redundant lookup of irq_descJiang Liu1-1/+1
Use irq_desc_get_xxx() to avoid redundant lookup of irq_desc while we already have a pointer to corresponding irq_desc. Preparatory patch for the removal of the 'irq' argument from irq flow handlers. Signed-off-by: Jiang Liu <jiang.liu@linux.intel.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Cc: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-07-14gpio/zynq: Use irq_set_chip_handler_name_locked()Thomas Gleixner1-2/+2
Hand in irq_data and avoid the redundant lookup of irq_desc. Originally-from: Jiang Liu <jiang.liu@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2015-06-10gpio: Added support to Zynq Ultrascale+ MPSoCAnurag Kumar Vulisha1-66/+125
Added support to Zynq Ultrascale+ MPSoC on the existing zynq gpio driver. Signed-off-by: Anurag Kumar Vulisha <anuragku@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2015-05-19Drivers: gpio: Fix spelling errorsColin Cronin1-1/+1
Fixed several spelling errors in gpio-lynxpoint, gpio-pca953x, gpio-tegra, gpio-zynq, gpiolib-of, gpiolib. Signed-off-by: Colin Cronin <colinpatrickcronin@gmail.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2014-12-04PM: Merge the SET*_RUNTIME_PM_OPS() macrosRafael J. Wysocki1-1/+1
The SET_PM_RUNTIME_PM_OPS() and SET_RUNTIME_PM_OPS() macros are identical except that one of them is not empty for CONFIG_PM set, while the other one is not empty for CONFIG_PM_RUNTIME set, respectively. However, after commit b2b49ccbdd54 (PM: Kconfig: Set PM_RUNTIME if PM_SLEEP is selected) PM_RUNTIME is always set if PM is set, so one of these macros is now redundant. For this reason, replace SET_PM_RUNTIME_PM_OPS() with SET_RUNTIME_PM_OPS() everywhere and redefine the SET_PM_RUNTIME_PM_OPS symbol as SET_RUNTIME_PM_OPS in case new code is starting to use the macro being removed here. Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org> Acked-by: Kevin Hilman <khilman@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2014-09-23gpio: remove remaining users of gpiochip_remove() retvalLinus Walleij1-7/+1
Some drivers accidentally still use the return value from gpiochip_remove(). Get rid of them so we can simplify this function and get rid of the return value. Cc: Abdoulaye Berthe <berthe.ab@gmail.com> Acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 02:02:19 +0300