| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
Remove unused parameter sent to latest fw.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Many source files in the tree are missing licensing information, which
makes it harder for compliance tools to determine the correct license.
By default all files without license information are under the default
license of the kernel, which is GPL version 2.
Update the files which contain no license information with the 'GPL-2.0'
SPDX license identifier. The SPDX identifier is a legally binding
shorthand, which can be used instead of the full boiler plate text.
This patch is based on work done by Thomas Gleixner and Kate Stewart and
Philippe Ombredanne.
How this work was done:
Patches were generated and checked against linux-4.14-rc6 for a subset of
the use cases:
- file had no licensing information it it.
- file was a */uapi/* one with no licensing information in it,
- file was a */uapi/* one with existing licensing information,
Further patches will be generated in subsequent months to fix up cases
where non-standard license headers were used, and references to license
had to be inferred by heuristics based on keywords.
The analysis to determine which SPDX License Identifier to be applied to
a file was done in a spreadsheet of side by side results from of the
output of two independent scanners (ScanCode & Windriver) producing SPDX
tag:value files created by Philippe Ombredanne. Philippe prepared the
base worksheet, and did an initial spot review of a few 1000 files.
The 4.13 kernel was the starting point of the analysis with 60,537 files
assessed. Kate Stewart did a file by file comparison of the scanner
results in the spreadsheet to determine which SPDX license identifier(s)
to be applied to the file. She confirmed any determination that was not
immediately clear with lawyers working with the Linux Foundation.
Criteria used to select files for SPDX license identifier tagging was:
- Files considered eligible had to be source code files.
- Make and config files were included as candidates if they contained >5
lines of source
- File already had some variant of a license header in it (even if <5
lines).
All documentation files were explicitly excluded.
The following heuristics were used to determine which SPDX license
identifiers to apply.
- when both scanners couldn't find any license traces, file was
considered to have no license information in it, and the top level
COPYING file license applied.
For non */uapi/* files that summary was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 11139
and resulted in the first patch in this series.
If that file was a */uapi/* path one, it was "GPL-2.0 WITH
Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was:
SPDX license identifier # files
---------------------------------------------------|-------
GPL-2.0 WITH Linux-syscall-note 930
and resulted in the second patch in this series.
- if a file had some form of licensing information in it, and was one
of the */uapi/* ones, it was denoted with the Linux-syscall-note if
any GPL family license was found in the file or had no licensing in
it (per prior point). Results summary:
SPDX license identifier # files
---------------------------------------------------|------
GPL-2.0 WITH Linux-syscall-note 270
GPL-2.0+ WITH Linux-syscall-note 169
((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21
((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17
LGPL-2.1+ WITH Linux-syscall-note 15
GPL-1.0+ WITH Linux-syscall-note 14
((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5
LGPL-2.0+ WITH Linux-syscall-note 4
LGPL-2.1 WITH Linux-syscall-note 3
((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3
((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1
and that resulted in the third patch in this series.
- when the two scanners agreed on the detected license(s), that became
the concluded license(s).
- when there was disagreement between the two scanners (one detected a
license but the other didn't, or they both detected different
licenses) a manual inspection of the file occurred.
- In most cases a manual inspection of the information in the file
resulted in a clear resolution of the license that should apply (and
which scanner probably needed to revisit its heuristics).
- When it was not immediately clear, the license identifier was
confirmed with lawyers working with the Linux Foundation.
- If there was any question as to the appropriate license identifier,
the file was flagged for further research and to be revisited later
in time.
In total, over 70 hours of logged manual review was done on the
spreadsheet to determine the SPDX license identifiers to apply to the
source files by Kate, Philippe, Thomas and, in some cases, confirmation
by lawyers working with the Linux Foundation.
Kate also obtained a third independent scan of the 4.13 code base from
FOSSology, and compared selected files where the other two scanners
disagreed against that SPDX file, to see if there was new insights. The
Windriver scanner is based on an older version of FOSSology in part, so
they are related.
Thomas did random spot checks in about 500 files from the spreadsheets
for the uapi headers and agreed with SPDX license identifier in the
files he inspected. For the non-uapi files Thomas did random spot checks
in about 15000 files.
In initial set of patches against 4.14-rc6, 3 files were found to have
copy/paste license identifier errors, and have been fixed to reflect the
correct identifier.
Additionally Philippe spent 10 hours this week doing a detailed manual
inspection and review of the 12,461 patched files from the initial patch
version early this week with:
- a full scancode scan run, collecting the matched texts, detected
license ids and scores
- reviewing anything where there was a license detected (about 500+
files) to ensure that the applied SPDX license was correct
- reviewing anything where there was no detection but the patch license
was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied
SPDX license was correct
This produced a worksheet with 20 files needing minor correction. This
worksheet was then exported into 3 different .csv files for the
different types of files to be modified.
These .csv files were then reviewed by Greg. Thomas wrote a script to
parse the csv files and add the proper SPDX tag to the file, in the
format that the file expected. This script was further refined by Greg
based on the output to detect more types of files automatically and to
distinguish between header and source .c files (which need different
comment types.) Finally Greg ran the script using the .csv files to
generate the patches.
Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org>
Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
to READ_ONCE()/WRITE_ONCE()
Please do not apply this to mainline directly, instead please re-run the
coccinelle script shown below and apply its output.
For several reasons, it is desirable to use {READ,WRITE}_ONCE() in
preference to ACCESS_ONCE(), and new code is expected to use one of the
former. So far, there's been no reason to change most existing uses of
ACCESS_ONCE(), as these aren't harmful, and changing them results in
churn.
However, for some features, the read/write distinction is critical to
correct operation. To distinguish these cases, separate read/write
accessors must be used. This patch migrates (most) remaining
ACCESS_ONCE() instances to {READ,WRITE}_ONCE(), using the following
coccinelle script:
----
// Convert trivial ACCESS_ONCE() uses to equivalent READ_ONCE() and
// WRITE_ONCE()
// $ make coccicheck COCCI=/home/mark/once.cocci SPFLAGS="--include-headers" MODE=patch
virtual patch
@ depends on patch @
expression E1, E2;
@@
- ACCESS_ONCE(E1) = E2
+ WRITE_ONCE(E1, E2)
@ depends on patch @
expression E;
@@
- ACCESS_ONCE(E)
+ READ_ONCE(E)
----
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: davem@davemloft.net
Cc: linux-arch@vger.kernel.org
Cc: mpe@ellerman.id.au
Cc: shuah@kernel.org
Cc: snitzer@redhat.com
Cc: thor.thayer@linux.intel.com
Cc: tj@kernel.org
Cc: viro@zeniv.linux.org.uk
Cc: will.deacon@arm.com
Link: http://lkml.kernel.org/r/1508792849-3115-19-git-send-email-paulmck@linux.vnet.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
|
|
This patch avoids copy of buffered data to hash from bufnext to buf
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
SEC1 doesn't support S/G in descriptors so for hash operations,
the CPU has to build a buffer containing the buffered block and
the incoming data. This generates a lot of memory copies which
represents more than 50% of CPU time of a md5sum operation as
shown below with a 'perf record'.
|--86.24%-- kcapi_md_digest
| |
| |--86.18%-- _kcapi_common_vmsplice_chunk_fd
| | |
| | |--83.68%-- splice
| | | |
| | | |--83.59%-- ret_from_syscall
| | | | |
| | | | |--83.52%-- sys_splice
| | | | | |
| | | | | |--83.49%-- splice_from_pipe
| | | | | | |
| | | | | | |--83.04%-- __splice_from_pipe
| | | | | | | |
| | | | | | | |--80.67%-- pipe_to_sendpage
| | | | | | | | |
| | | | | | | | |--78.25%-- hash_sendpage
| | | | | | | | | |
| | | | | | | | | |--60.08%-- ahash_process_req
| | | | | | | | | | |
| | | | | | | | | | |--56.36%-- sg_copy_buffer
| | | | | | | | | | | |
| | | | | | | | | | | |--55.29%-- memcpy
| | | | | | | | | | | |
However, unlike SEC2+, SEC1 offers the possibility to chain
descriptors. It is therefore possible to build a first descriptor
pointing to the buffered data and a second descriptor pointing to
the incoming data, hence avoiding the memory copy to a single
buffer.
With this patch, the time necessary for a md5sum on a 90Mbytes file
is approximately 3 seconds. Without the patch it takes 6 seconds.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
At every request, we map and unmap the same hash hw_context.
This patch moves the dma mapping/unmapping in functions ahash_init()
and ahash_import().
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
dma_map_single() is an heavy operation which doesn't need to
be done at each request as the key doesn't change.
Instead of DMA mapping the key at every request, this patch maps it
once in setkey()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Do (desc->hdr & DESC_HDR_TYPE_IPSEC_ESP) only once.
Limit number of if/else paths
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
to_talitos_ptr() and to_talitos_ptr_len() are always called together
in order to fully set a ptr, so lets merge them into a single
helper.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The number of channels is known from the beginning, no need to
test it everytime.
This patch defines two additional done functions handling only channel 0.
Then the probe registers the correct one based on the number of channels.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use devm_ioremap()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use of_property_read_u32() to simplify DT read
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Replace kmalloc() by devm_kmalloc()
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
talitos_handle_buggy_hash() and talitos_sg_map() are only used
locally, make them static
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch zeroize the descriptor at allocation using memset().
This has two advantages:
- It reduces the number of places where data has to be set to 0
- It avoids reading memory and loading the cache with data that
will be entirely replaced.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
ctr-aes-talitos test fails as follows on SEC2
[ 0.837427] alg: skcipher: Test 1 failed (invalid result) on encryption for ctr-aes-talitos
[ 0.845763] 00000000: 16 36 d5 ee 34 f8 06 25 d7 7f 8e 56 ca 88 43 45
[ 0.852345] 00000010: f9 3f f7 17 2a b2 12 23 30 43 09 15 82 dd e1 97
[ 0.858940] 00000020: a7 f7 32 b5 eb 25 06 13 9a ec f5 29 25 f8 4d 66
[ 0.865366] 00000030: b0 03 5b 8e aa 9a 42 b6 19 33 8a e2 9d 65 96 95
This patch fixes the descriptor type which is special for CTR AES
Fixes: 5e75ae1b3cef6 ("crypto: talitos - add new crypto modes")
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
sg_link_tbl_len shall be used instead of cryptlen, otherwise
SECs which perform HW CICV verification will fail.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
sha224 AEAD test fails with:
[ 2.803125] talitos ff020000.crypto: DEUISR 0x00000000_00000000
[ 2.808743] talitos ff020000.crypto: MDEUISR 0x80100000_00000000
[ 2.814678] talitos ff020000.crypto: DESCBUF 0x20731f21_00000018
[ 2.820616] talitos ff020000.crypto: DESCBUF 0x0628d64c_00000010
[ 2.826554] talitos ff020000.crypto: DESCBUF 0x0631005c_00000018
[ 2.832492] talitos ff020000.crypto: DESCBUF 0x0628d664_00000008
[ 2.838430] talitos ff020000.crypto: DESCBUF 0x061b13a0_00000080
[ 2.844369] talitos ff020000.crypto: DESCBUF 0x0631006c_00000080
[ 2.850307] talitos ff020000.crypto: DESCBUF 0x0631006c_00000018
[ 2.856245] talitos ff020000.crypto: DESCBUF 0x063100ec_00000000
[ 2.884972] talitos ff020000.crypto: failed to reset channel 0
[ 2.890503] talitos ff020000.crypto: done overflow, internal time out, or rngu error: ISR 0x20000000_00020000
[ 2.900652] alg: aead: encryption failed on test 1 for authenc-hmac-sha224-cbc-3des-talitos: ret=22
This is due to SHA224 not being supported by the HW. Allthough for
hash we are able to init the hash context by SW, it is not
possible for AEAD. Therefore SHA224 AEAD has to be deactivated.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Crypto manager test report the following failures:
[ 3.061081] alg: skcipher: setkey failed on test 5 for ecb-des-talitos: flags=100
[ 3.069342] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-talitos: flags=100
[ 3.077754] alg: skcipher-ddst: setkey failed on test 5 for ecb-des-talitos: flags=100
This is due to setkey being expected to detect weak keys.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
On SEC2, when using the old descriptors type (hmac snoop no afeu)
for doing IPsec, the CICV out pointeur points out of the allocated
memory.
[ 2.502554] =============================================================================
[ 2.510740] BUG dma-kmalloc-256 (Not tainted): Redzone overwritten
[ 2.516907] -----------------------------------------------------------------------------
[ 2.516907]
[ 2.526535] Disabling lock debugging due to kernel taint
[ 2.531845] INFO: 0xde858108-0xde85810b. First byte 0xf8 instead of 0xcc
[ 2.538549] INFO: Allocated in 0x806181a9 age=0 cpu=0 pid=58
[ 2.544229] __kmalloc+0x374/0x564
[ 2.547649] talitos_edesc_alloc+0x17c/0x48c
[ 2.551929] aead_edesc_alloc+0x80/0x154
[ 2.555863] aead_encrypt+0x30/0xe0
[ 2.559368] __test_aead+0x5a0/0x1f3c
[ 2.563042] test_aead+0x2c/0x110
[ 2.566371] alg_test_aead+0x5c/0xf4
[ 2.569958] alg_test+0x1dc/0x5a0
[ 2.573305] cryptomgr_test+0x50/0x70
[ 2.576984] kthread+0xd8/0x134
[ 2.580155] ret_from_kernel_thread+0x5c/0x64
[ 2.584534] INFO: Freed in ipsec_esp_encrypt_done+0x130/0x240 age=6 cpu=0 pid=0
[ 2.591839] ipsec_esp_encrypt_done+0x130/0x240
[ 2.596395] flush_channel+0x1dc/0x488
[ 2.600161] talitos2_done_4ch+0x30/0x200
[ 2.604185] tasklet_action+0xa0/0x13c
[ 2.607948] __do_softirq+0x148/0x6cc
[ 2.611623] irq_exit+0xc0/0x124
[ 2.614869] call_do_irq+0x24/0x3c
[ 2.618292] do_IRQ+0x78/0x108
[ 2.621369] ret_from_except+0x0/0x14
[ 2.625055] finish_task_switch+0x58/0x350
[ 2.629165] schedule+0x80/0x134
[ 2.632409] schedule_preempt_disabled+0x38/0xc8
[ 2.637042] cpu_startup_entry+0xe4/0x190
[ 2.641074] start_kernel+0x3f4/0x408
[ 2.644741] 0x3438
[ 2.646857] INFO: Slab 0xdffbdb00 objects=9 used=1 fp=0xde8581c0 flags=0x0080
[ 2.653978] INFO: Object 0xde858008 @offset=8 fp=0xca4395df
[ 2.653978]
[ 2.661032] Redzone de858000: cc cc cc cc cc cc cc cc ........
[ 2.669029] Object de858008: 00 00 00 02 00 00 00 02 00 6b 6b 6b 1e 83 ea 28 .........kkk...(
[ 2.677628] Object de858018: 00 00 00 70 1e 85 80 64 ff 73 1d 21 6b 6b 6b 6b ...p...d.s.!kkkk
[ 2.686228] Object de858028: 00 20 00 00 1e 84 17 24 00 10 00 00 1e 85 70 00 . .....$......p.
[ 2.694829] Object de858038: 00 18 00 00 1e 84 17 44 00 08 00 00 1e 83 ea 28 .......D.......(
[ 2.703430] Object de858048: 00 80 00 00 1e 84 f0 00 00 80 00 00 1e 85 70 10 ..............p.
[ 2.712030] Object de858058: 00 20 6b 00 1e 85 80 f4 6b 6b 6b 6b 00 80 02 00 . k.....kkkk....
[ 2.720629] Object de858068: 1e 84 f0 00 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b ....kkkkkkkkkkkk
[ 2.729230] Object de858078: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.737830] Object de858088: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.746429] Object de858098: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.755029] Object de8580a8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.763628] Object de8580b8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.772229] Object de8580c8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.780829] Object de8580d8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b kkkkkkkkkkkkkkkk
[ 2.789430] Object de8580e8: 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 6b 73 b0 ea 9f kkkkkkkkkkkks...
[ 2.798030] Object de8580f8: e8 18 80 d6 56 38 44 c0 db e3 4f 71 f7 ce d1 d3 ....V8D...Oq....
[ 2.806629] Redzone de858108: f8 bd 3e 4f ..>O
[ 2.814279] Padding de8581b0: 5a 5a 5a 5a 5a 5a 5a 5a ZZZZZZZZ
[ 2.822283] CPU: 0 PID: 0 Comm: swapper Tainted: G B 4.9.50-g995be12679 #179
[ 2.831819] Call Trace:
[ 2.834301] [dffefd20] [c01aa9a8] check_bytes_and_report+0x100/0x194 (unreliable)
[ 2.841801] [dffefd50] [c01aac3c] check_object+0x200/0x530
[ 2.847306] [dffefd80] [c01ae584] free_debug_processing+0x290/0x690
[ 2.853585] [dffefde0] [c01aec8c] __slab_free+0x308/0x628
[ 2.859000] [dffefe80] [c05057f4] ipsec_esp_encrypt_done+0x130/0x240
[ 2.865378] [dffefeb0] [c05002c4] flush_channel+0x1dc/0x488
[ 2.870968] [dffeff10] [c05007a8] talitos2_done_4ch+0x30/0x200
[ 2.876814] [dffeff30] [c002fe38] tasklet_action+0xa0/0x13c
[ 2.882399] [dffeff60] [c002f118] __do_softirq+0x148/0x6cc
[ 2.887896] [dffeffd0] [c002f954] irq_exit+0xc0/0x124
[ 2.892968] [dffefff0] [c0013adc] call_do_irq+0x24/0x3c
[ 2.898213] [c0d4be00] [c000757c] do_IRQ+0x78/0x108
[ 2.903113] [c0d4be30] [c0015c08] ret_from_except+0x0/0x14
[ 2.908634] --- interrupt: 501 at finish_task_switch+0x70/0x350
[ 2.908634] LR = finish_task_switch+0x58/0x350
[ 2.919327] [c0d4bf20] [c085e1d4] schedule+0x80/0x134
[ 2.924398] [c0d4bf50] [c085e2c0] schedule_preempt_disabled+0x38/0xc8
[ 2.930853] [c0d4bf60] [c007f064] cpu_startup_entry+0xe4/0x190
[ 2.936707] [c0d4bfb0] [c096c434] start_kernel+0x3f4/0x408
[ 2.942198] [c0d4bff0] [00003438] 0x3438
[ 2.946137] FIX dma-kmalloc-256: Restoring 0xde858108-0xde85810b=0xcc
[ 2.946137]
[ 2.954158] FIX dma-kmalloc-256: Object at 0xde858008 not freed
This patch reworks the handling of the CICV out in order
to properly handle all cases.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
AEAD tests fail when destination SG list has more than 1 element.
[ 2.058752] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-aes-talitos
[ 2.066965] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: c0 43 ff 74 c0 43 ff e0 de 83 d1 20 de 84 8e 54
00000020: de 83 d7 c4
[ 2.082138] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-aes-talitos
[ 2.090435] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: de 84 ea 58 c0 93 1a 24 de 84 e8 59 de 84 f1 20
00000020: 00 00 00 00
[ 2.105721] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-3des-talitos
[ 2.114259] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c
[ 2.166410] alg: aead: Test 1 failed on encryption for authenc-hmac-sha1-cbc-3des-talitos
[ 2.174794] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c
[ 2.226486] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-talitos)
[ 2.236459] alg: No test for authenc(hmac(sha224),cbc(aes)) (authenc-hmac-sha224-cbc-aes-talitos)
[ 2.247196] alg: aead: Test 1 failed on encryption for authenc-hmac-sha224-cbc-3des-talitos
[ 2.255555] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8
[ 2.309004] alg: aead: Test 1 failed on encryption for authenc-hmac-sha224-cbc-3des-talitos
[ 2.317562] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8
[ 2.370710] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-aes-talitos
[ 2.379177] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
[ 2.397863] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-aes-talitos
[ 2.406134] 00000000: 53 69 6e 67 6c 65 20 62 6c 6f 63 6b 20 6d 73 67
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
[ 2.424789] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-3des-talitos
[ 2.433491] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8 c0 96 e9 20 c0 00 3d dc
[ 2.488832] alg: aead: Test 1 failed on encryption for authenc-hmac-sha256-cbc-3des-talitos
[ 2.497387] 00000000: 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72 73 74
00000010: 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63 74 65
00000020: 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65 65 72
00000030: 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53 72 63
00000040: 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20 63 65
00000050: 65 72 73 74 54 20 6f 6f 4d 20 6e 61 20 79 65 53
00000060: 72 63 74 65 20 73 6f 54 20 6f 61 4d 79 6e 53 20
00000070: 63 65 65 72 73 74 54 20 6f 6f 4d 20 6e 61 0a 79
00000080: c0 50 f1 ac c0 50 f3 38 c0 50 f3 94 c0 50 f5 30
00000090: c0 99 74 3c c0 96 e5 b8 c0 96 e9 20 c0 00 3d dc
This patch fixes that.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds aes-gcm support to crypto4xx.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch adds aes-ccm support.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch enhances existing interfaces and
functions to support AEAD ciphers in the next
patches.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Thanks to the big overhaul of crypto4xx_build_pd(), the request-local
sa_in, sa_out and state_record allocation can be simplified.
There's no need to setup any dma coherent memory anymore and
much of the support code can be removed.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If the crypto4xx device is continuously loaded by dm-crypt
and ipsec work, it will start to work intermittent after a
few (between 20-30) seconds, hurting throughput and latency.
This patch contains various stability improvements in order
to fix this issue. So far, the hardware has survived more
than a day without suffering any stalls under the continuous
load.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
crypto4xx_core.c:179:6: warning: symbol 'crypto4xx_free_state_record'
was not declared. Should it be static?
crypto4xx_core.c:331:5: warning: symbol 'crypto4xx_get_n_gd'
was not declared. Should it be static?
crypto4xx_core.c:652:6: warning: symbol 'crypto4xx_return_pd'
was not declared. Should it be static?
crypto4xx_return_pd() is not used by anything. Therefore it is removed.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch overhauls and fixes code related to crypto4xx_build_pd()
* crypto4xx_build_pd() did not handle chained source scatterlist.
This is fixed by replacing the buggy indexed-access of &src[idx]
with sg_next() in the gather array setup loop.
* The redundant is_hash, direction, save_iv and pd_ctl members
in the crypto4xx_ctx struct have been removed.
- is_hash can be derived from the crypto_async_request parameter.
- direction is already part of the security association's
bf.dir bitfield.
- save_iv is unused.
- pd_ctl always had the host_ready bit enabled anyway.
(the hash_final case is rather pointless, since the ahash
code has been deactivated).
* make crypto4xx_build_pd()'s caller responsible for converting
the IV to the LE32 format.
* change crypto4xx_ahash_update() and crypto4xx_ahash_digest() to
initialize a temporary destination scatterlist. This allows the
removal of an ugly cast of req->result (which is a pointer to an
u8-array) to a scatterlist pointer.
* change crypto4xx_build_pd() return type to int. After all
it returns -EINPROGRESS/-EBUSY.
* fix crypto4xx_build_pd() thread-unsafe sa handling.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The hardware expects that the keys, IVs (and inner/outer hashes)
are in the le32 format.
This patch changes all hardware interface declarations to use
the correct LE32 data format for each field.
In order to pass __CHECK_ENDIAN__ checks, crypto4xx_memcpy_le
has to be honest about the endianness of its parameters.
The function was split and moved to the common crypto4xx_core.h
header. This allows the compiler to generate better code if the
sizes/len is a constant (various *_IV_LEN).
Please note that the hardware isn't consistent with the endiannes
of the save_digest field in the state record struct though.
The hashes produced by GHASH and CBC (for CCM) will be in LE32.
Whereas md5 and sha{1/,256,...} do not need any conversion.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Previously, If the crypto4xx driver used all available
security contexts, it would simply refuse new requests
with -EAGAIN. CRYPTO_TFM_REQ_MAY_BACKLOG was ignored.
in case of dm-crypt.c's crypt_convert() function this was
causing the following errors to manifest, if the system was
pushed hard enough:
| EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino ..
| EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino ..
| EXT4-fs warning (dm-1): ext4_end_bio:314: I/O error -5 writing to ino ..
| JBD2: Detected IO errors while flushing file data on dm-1-8
| Aborting journal on device dm-1-8.
| EXT4-fs error : ext4_journal_check_start:56: Detected aborted journal
| EXT4-fs (dm-1): Remounting filesystem read-only
| EXT4-fs : ext4_writepages: jbd2_start: 2048 pages, inode 498...; err -30
(This did cause corruptions due to failed writes)
To fix this mess, the crypto4xx driver needs to notifiy the
user to slow down. This can be achieved by returning -EBUSY
on requests, once the crypto hardware was falling behind.
Note: -EBUSY has two different meanings. Setting the flag
CRYPTO_TFM_REQ_MAY_BACKLOG implies that the request was
successfully queued, by the crypto driver. To achieve this
requirement, the implementation introduces a threshold check and
adds logic to the completion routines in much the same way as
AMD's Cryptographic Coprocessor (CCP) driver do.
Note2: Tests showed that dm-crypt starved ipsec traffic.
Under load, ipsec links dropped to 0 Kbits/s. This is because
dm-crypt's callback would instantly queue the next request.
In order to not starve ipsec, the driver reserves a small
portion of the available crypto contexts for this purpose.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
If crypto4xx is used in conjunction with dm-crypt, the available
ring buffer elements are not enough to handle the load properly.
On an aes-cbc-essiv:sha256 encrypted swap partition the read
performance is abyssal: (tested with hdparm -t)
/dev/mapper/swap_crypt:
Timing buffered disk reads: 14 MB in 3.68 seconds = 3.81 MB/sec
The patch increases both PPC4XX_NUM_SD and PPC4XX_NUM_PD to 256.
This improves the performance considerably:
/dev/mapper/swap_crypt:
Timing buffered disk reads: 104 MB in 3.03 seconds = 34.31 MB/sec
Furthermore, PPC4XX_LAST_SD, PPC4XX_LAST_GD and PPC4XX_LAST_PD
can be easily calculated from their respective PPC4XX_NUM_*
constant.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
This patch fixes a type mismatch error that I accidentally
introduced when I moved and refactored the dynamic_contents
helpers.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
I used aes-cbc as a template for ofb. But sadly I forgot
to update set_key method to crypto4xx_setkey_aes_ofb().
this was caught by the testmgr:
alg: skcipher: Test 1 failed (invalid result) on encr. for ofb-aes-ppc4xx
00000000: 76 49 ab ac 81 19 b2 46 ce e9 8e 9b 12 e9 19 7d
00000010: 50 86 cb 9b 50 72 19 ee 95 db 11 3a 91 76 78 b2
00000020: 73 be d6 b8 e3 c1 74 3b 71 16 e6 9e 22 22 95 16
00000030: 3f f1 ca a1 68 1f ac 09 12 0e ca 30 75 86 e1 a7
With the correct set_key method, the aes-ofb cipher passes the test.
name : ofb(aes)
driver : ofb-aes-ppc4xx
module : crypto4xx
priority : 300
refcnt : 1
selftest : passed
internal : no
type : ablkcipher
async : yes
blocksize : 16
min keysize : 16
max keysize : 32
ivsize : 16
geniv : <default>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The hmac_mc parameter of set_dynamic_sa_command_1()
was defined but not used. On closer inspection it
turns out, it was never wired up.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
pr_err() messages should terminated with a new-line to avoid
other messages being concatenated onto the end.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The usage of of_device_get_match_data reduce the code size a bit.
Furthermore, it prevents an improbable dereference when
of_match_device() return NULL.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The usage of of_device_get_match_data reduce the code size a bit.
Furthermore, it prevents an improbable dereference when
of_match_device() return NULL.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
The usage of of_device_get_match_data reduce the code size a bit.
Furthermore, it prevents an improbable dereference when
of_match_device() return NULL.
Signed-off-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Signed-off-by: Allen Pais <allen.lkml@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use the provided mechanism in dmaengine.h to invoke the
completion callback.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Clean up the mapped pages and the unmap object once we are done with
it. This enables the final clean-up of the object once the transfer
is complete.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
gcc warns that the length for the extra unaligned data in the hash
function may be used unaligned. In theory this could happen if
we pass a zero-length sg_list, or if sg_is_last() was never true:
In file included from drivers/crypto/stm32/stm32-hash.c:23:
drivers/crypto/stm32/stm32-hash.c: In function 'stm32_hash_one_request':
include/uapi/linux/kernel.h:12:49: error: 'ncp' may be used uninitialized in this function [-Werror=maybe-uninitialized]
#define __KERNEL_DIV_ROUND_UP(n, d) (((n) + (d) - 1) / (d))
Neither of these can happen in practice, so the warning is harmless.
However while trying to suppress the warning, I noticed multiple
problems with that code:
- On big-endian kernels, we byte-swap the data like we do for
register accesses, however this is a data stream and almost
certainly needs to use a single writesl() instead of series
of writel() to give the correct hash.
- If the length is not a multiple of four bytes, we skip the
last word entirely, since we write the truncated length
using stm32_hash_set_nblw().
- If we change the code to round the length up rather than
down, the last bytes contain stale data, so it needs some
form of padding.
This tries to address all four problems, by correctly
initializing the length to zero, using endian-safe copy
functions, adding zero-padding and passing the padded length.
I have done no testing on this patch, so please review
carefully and if possible test with an unaligned length
and big-endian kernel builds.
Fixes: 8a1012d3f2ab ("crypto: stm32 - Support for STM32 HASH module")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Add support to explicity ACK mailbox message
because after sending message we can know
the send status via error attribute of brcm_message.
This is needed to support "txdone_ack" supported in
mailbox controller driver.
Fixes: 9d12ba86f818 ("crypto: brcm - Add Broadcom SPU driver")
Signed-off-by: Raveendra Padasalagi <raveendra.padasalagi@broadcom.com>
Reviewed-by: Anup Patel <anup.patel@broadcom.com>
Reviewed-by: Scott Branden <scott.branden@broadcom.com>
Cc: stable@vger.kernel.org
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Fix checkpatch.pl warnings:
WARNING: void function return statements are not generally useful
FILE: crypto/rmd128.c:218:
FILE: crypto/rmd160.c:261:
FILE: crypto/rmd256.c:233:
FILE: crypto/rmd320.c:280:
FILE: crypto/tcrypt.c:385:
FILE: drivers/crypto/ixp4xx_crypto.c:538:
FILE: drivers/crypto/marvell/cesa.c:81:
FILE: drivers/crypto/ux500/cryp/cryp_core.c:1755:
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Use PTR_ERROR_ZERO rather than if(IS_ERR(...)) + PTR_ERR.
Build successfully.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
|
Kfree on NULL pointer is a no-op and therefore checking is redundant.
Signed-off-by: Himanshu Jha <himanshujha199640@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
|
