summaryrefslogtreecommitdiff
path: root/drivers/clk
AgeCommit message (Collapse)AuthorFilesLines
2020-12-21Merge tag 'clk-for-linus' of ↵Linus Torvalds99-1380/+8252
git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux Pull clk updates from Stephen Boyd: "The core framework got some nice improvements this time around. We gained the ability to get struct clk pointers from a struct clk_hw so that clk providers can consume the clks they provide, if they need to do something like that. This has been a long missing part of the clk provider API that will help us move away from exposing a struct clk pointer in the struct clk_hw. Tracepoints are added for the clk_set_rate() "range" functions, similar to the tracepoints we already have for clk_set_rate() and we added a column to debugfs to help developers understand the hardware enable state of clks in case firmware or bootloader state is different than what is expected. Overall the core changes are mostly improving the clk driver writing experience. At the driver level, we have the usual collection of driver updates and new drivers for new SoCs. This time around the Qualcomm folks introduced a good handful of clk drivers for various parts of three or four SoCs. The SiFive folks added a new clk driver for their FU740 SoCs, coming in second on the diffstat and then Atmel AT91 and Amlogic SoCs had lots of work done after that for various new features. One last thing to note in the driver area is that the i.MX driver has gained a new binding to support SCU clks after being on the list for many months. It uses a two cell binding which is sort of rare in clk DT bindings. Beyond that we have the usual set of driver fixes and tweaks that come from more testing and finding out that some configuration was wrong or that a driver could support being built as a module. Summary: Core: - Add some trace points for clk_set_rate() "range" functions - Add hardware enable information to clk_summary debugfs - Replace clk-provider.h with of_clk.h when possible - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw New Drivers: - Bindings for Canaan K210 SoC clks - Support for SiFive FU740 PRCI - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs Updates: - DVFS support for AT91 clk driver - Update git repo branch for Renesas clock drivers - Add camera (CSI) and video-in (VIN) clocks on Renesas R-Car V3U - Add RPC (QSPI/HyperFLASH) clocks on Renesas RZ/G2M, RZ/G2N, and RZ/G2E - Stop using __raw_*() I/O accessors in Renesas clk drivers - One more conversion of DT bindings to json-schema - Make i.MX clk-gate2 driver more flexible - New two cell binding for i.MX SCU clks - Drop of_match_ptr() in i.MX8 clk drivers - Add arch dependencies for Rockchip clk drivers - Fix i2s on Rockchip rk3066 - Add MIPI DSI clks on Amlogic axg and g12 SoCs - Support modular builds of Amlogic clk drivers - Fix an Amlogic Video PLL clock dependency - Samsung Kconfig dependencies updates for better compile test coverage - Refactoring of the Samsung PLL clocks driver - Small Tegra driver cleanups - Minor fixes to Ingenic and VC5 clk drivers - Cleanup patches to remove unused variables and plug memory leaks" * tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (134 commits) dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" clk: ingenic: Fix divider calculation with div tables clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9 clk: si5351: Wait for bit clear after PLL reset clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error ...
2020-12-21Merge branches 'clk-ingenic', 'clk-vc5', 'clk-cleanup', 'clk-canaan' and ↵Stephen Boyd7-10/+19
'clk-marvell' into clk-next - Bindings for Canaan K210 SoC clks * clk-ingenic: clk: ingenic: Fix divider calculation with div tables * clk-vc5: clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts" * clk-cleanup: clk: sunxi-ng: Make sure divider tables have sentinel clk: s2mps11: Fix a resource leak in error handling paths in the probe function clk: bcm: dvp: Add MODULE_DEVICE_TABLE() clk: bcm: dvp: drop a variable that is assigned to only * clk-canaan: dt-binding: clock: Document canaan,k210-clk bindings dt-bindings: Add Canaan vendor prefix * clk-marvell: clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9
2020-12-21Merge branches 'clk-ti', 'clk-analog', 'clk-trace', 'clk-at91' and ↵Stephen Boyd20-280/+905
'clk-silabs' into clk-next - Add some trace points for clk_set_rate() "range" functions - DVFS support for AT91 clk driver * clk-ti: clk: ti: omap5: Fix reboot DPLL lock failure when using ABE TIMERs clk: ti: Fix memleak in ti_fapll_synth_setup * clk-analog: clk: axi-clkgen: move the OF table at the bottom of the file clk: axi-clkgen: wrap limits in a struct and keep copy on the state object dt-bindings: clock: adi,axi-clkgen: convert old binding to yaml format * clk-trace: clk: Trace clk_set_rate() "range" functions * clk-at91: clk: at91: sam9x60: remove atmel,osc-bypass support clk: at91: sama7g5: register cpu clock clk: at91: clk-master: re-factor master clock clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHz clk: at91: sama7g5: decrease lower limit for MCK0 rate clk: at91: sama7g5: remove mck0 from parent list of other clocks clk: at91: clk-sam9x60-pll: allow runtime changes for pll clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristics clk: at91: clk-master: add 5th divisor for mck master clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DT dt-bindings: clock: at91: add sama7g5 pll defines clk: at91: sama7g5: fix compilation error * clk-silabs: clk: si5351: Wait for bit clear after PLL reset
2020-12-21Merge branches 'clk-tegra', 'clk-imx', 'clk-sifive', 'clk-mediatek' and ↵Stephen Boyd27-726/+1673
'clk-summary' into clk-next - Support for SiFive FU740 PRCI - Add hardware enable information to clk_summary debugfs * clk-tegra: clk: tegra: Fix duplicated SE clock entry clk: tegra: bpmp: Clamp clock rates on requests clk: tegra: Do not return 0 on failure * clk-imx: (24 commits) clk: imx: scu: remove the calling of device_is_bound clk: imx: scu: Make pd_np with static keyword clk: imx8mq: drop of_match_ptr from of_device_id table clk: imx8mp: drop of_match_ptr from of_device_id table clk: imx8mn: drop of_match_ptr from of_device_id table clk: imx8mm: drop of_match_ptr from of_device_id table clk: imx: gate2: Remove unused variable ret clk: imx: gate2: Add locking in is_enabled op clk: imx: gate2: Add cgr_mask for more flexible number of control bits clk: imx: gate2: Check if clock is enabled against cgr_val clk: imx: gate2: Keep the register writing in on place clk: imx: gate2: Remove the IMX_CLK_GATE2_SINGLE_BIT special case clk: imx: scu: fix build break when compiled as modules clk: imx: remove redundant assignment to pointer np clk: imx: remove unneeded semicolon clk: imx: lpcg: add suspend/resume support clk: imx: clk-imx8qxp-lpcg: add runtime pm support clk: imx: lpcg: allow lpcg clk to take device pointer clk: imx: imx8qxp-lpcg: add parsing clocks from device tree clk: imx: scu: add suspend/resume support ... * clk-sifive: clk: sifive: Add clock enable and disable ops clk: sifive: Fix the wrong bit field shift clk: sifive: Add a driver for the SiFive FU740 PRCI IP block clk: sifive: Use common name for prci configuration clk: sifive: Extract prci core to common base dt-bindings: fu740: prci: add YAML documentation for the FU740 PRCI * clk-mediatek: clk: mediatek: Make mtk_clk_register_mux() a static function * clk-summary: clk: Add hardware-enable column to clk summary
2020-12-21Merge branches 'clk-amlogic', 'clk-rockchip', 'clk-of', 'clk-freescale' and ↵Stephen Boyd23-47/+1199
'clk-unused' into clk-next - Replace clk-provider.h with of_clk.h when possible * clk-amlogic: clk: meson: g12a: add MIPI DSI Host Pixel Clock dt-bindings: clk: g12a-clkc: add DSI Pixel clock bindings clk: meson: enable building as modules clk: meson: Kconfig: fix dependency for G12A clk: meson: axg: add MIPI DSI Host clock clk: meson: axg: add Video Clocks dt-bindings: clk: axg-clkc: add MIPI DSI Host clock binding dt-bindings: clk: axg-clkc: add Video Clocks * clk-rockchip: clk: rockchip: fix i2s gate bits on rk3066 and rk3188 clk: rockchip: add CLK_SET_RATE_PARENT to sclk for rk3066a i2s and uart clocks clk: rockchip: Remove redundant null check before clk_prepare_enable clk: rockchip: Add appropriate arch dependencies * clk-of: xtensa: Replace <linux/clk-provider.h> by <linux/of_clk.h> sh: boards: Replace <linux/clk-provider.h> by <linux/of_clk.h> * clk-freescale: clk: fsl-flexspi: new driver dt-bindings: clock: document the fsl-flexspi-clk device clk: divider: add devm_clk_hw_register_divider_table() clk: qoriq: provide constants for the type clk: fsl-sai: use devm_clk_hw_register_composite_pdata() clk: composite: add devm_clk_hw_register_composite_pdata() clk: fsl-sai: fix memory leak clk: qoriq: Add platform dependencies * clk-unused: clk: scpi: mark scpi_clk_match as maybe unused clk: pwm: drop of_match_ptr from of_device_id table
2020-12-21Merge branches 'clk-doc', 'clk-qcom', 'clk-simplify', 'clk-hw', ↵Stephen Boyd25-317/+4456
'clk-renesas' and 'clk-samsung' into clk-next - Camera clks on Qualcomm SC7180 SoCs - GCC and RPMh clks on Qualcomm SDX55 SoCs - RPMh clks on Qualcomm SM8350 SoCs - LPASS clks on Qualcomm SM8250 SoCs - Add devm variant of clk_notifier_register() - Add clk_hw_get_clk() to generate a struct clk from a struct clk_hw * clk-doc: clk: fix a kernel-doc markup * clk-qcom: (27 commits) clk: qcom: rpmh: add support for SM8350 rpmh clocks dt-bindings: clock: Add RPMHCC bindings for SM8350 clk: qcom: lpasscc: Introduce pm autosuspend for SC7180 clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2 clk: qcom: gcc-sc7180: Use floor ops for sdcc clks clk: qcom: Add GDSC support for SDX55 GCC dt-bindings: clock: Add GDSC in SDX55 GCC clk: qcom: Add support for SDX55 RPMh clocks dt-bindings: clock: Introduce RPMHCC bindings for SDX55 clk: qcom: Add SDX55 GCC support dt-bindings: clock: Add SDX55 GCC clock bindings clk: qcom: Kconfig: Fix spelling mistake "dyanmic" -> "dynamic" clk: qcom: rpmh: Add CE clock on sdm845. dt-bindings: clock: Add entry for crypto engine RPMH clock resource clk: qcom: dispcc-sm8250: handle MMCX power domain clk: qcom: camcc-sc7180: Use runtime PM ops instead of clk ones clk: qcom: lpass-sc7180: Clean up on error in lpass_sc7180_init() clk: qcom: Add support to LPASS AON_CC Glitch Free Mux clocks clk: qcom: Add support to LPASS AUDIO_CC Glitch Free Mux clocks dt-bindings: clock: Add support for LPASS Always ON Controller ... * clk-simplify: clk: remove unneeded dead-store initialization * clk-hw: clk: meson: g12: use devm variant to register notifiers clk: add devm variant of clk_notifier_register clk: meson: g12: drop use of __clk_lookup() clk: add api to get clk consumer from clk_hw clk: avoid devm_clk_release name clash * clk-renesas: dt-bindings: clock: renesas: rcar-usb2-clock-sel: Convert bindings to json-schema clk: renesas: sh73a0: Stop using __raw_*() I/O accessors clk: renesas: r8a774c0: Add RPC clocks clk: renesas: r8a779a0: Fix R and OSC clocks clk: renesas: cpg-mssr: fix kerneldoc of cpg_mssr_priv clk: renesas: rcar-usb2-clock-sel: Replace devm_reset_control_array_get() clk: renesas: r8a774b1: Add RPC clocks clk: renesas: r8a774a1: Add RPC clocks clk: renesas: r8a779a0: Add VIN clocks clk: renesas: r8a779a0: Add CSI4[0-3] clocks MAINTAINERS: Update git repo for Renesas clock drivers clk: renesas: r8a779a0: Make rcar_r8a779a0_cpg_clk_register() static clk: renesas: rcar-gen3: Remove stp_ck handling for SDHI * clk-samsung: clk: samsung: Prevent potential endless loop in the PLL ops clk: samsung: Allow compile testing of Exynos, S3C64xx and S5Pv210
2020-12-20clk: vc5: Use "idt,voltage-microvolt" instead of "idt,voltage-microvolts"Geert Uytterhoeven1-2/+2
Commit 45c940184b501fc6 ("dt-bindings: clk: versaclock5: convert to yaml") accidentally changed "idt,voltage-microvolts" to "idt,voltage-microvolt" in the DT bindings, while the driver still used the former. Update the driver to match the bindings, as Documentation/devicetree/bindings/property-units.txt actually recommends using "microvolt". Fixes: 260249f929e81d3d ("clk: vc5: Enable addition output configurations of the Versaclock") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20201218125253.3815567-1-geert+renesas@glider.be Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-20clk: ingenic: Fix divider calculation with div tablesPaul Cercueil1-4/+10
The previous code assumed that a higher hardware value always resulted in a bigger divider, which is correct for the regular clocks, but is an invalid assumption when a divider table is provided for the clock. Perfect example of this is the PLL0_HALF clock, which applies a /2 divider with the hardware value 0, and a /1 divider otherwise. Fixes: a9fa2893fcc6 ("clk: ingenic: Add support for divider tables") Cc: <stable@vger.kernel.org> # 5.2 Signed-off-by: Paul Cercueil <paul@crapouillou.net> Link: https://lore.kernel.org/r/20201212135733.38050-1-paul@crapouillou.net Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-20clk: sunxi-ng: Make sure divider tables have sentinelJernej Skrabec2-0/+2
Two clock divider tables are missing sentinel at the end. Effect of that is that clock framework reads past the last entry. Fix that with adding sentinel at the end. Issue was discovered with KASan. Fixes: 0577e4853bfb ("clk: sunxi-ng: Add H3 clocks") Fixes: c6a0637460c2 ("clk: sunxi-ng: Add A64 clocks") Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net> Link: https://lore.kernel.org/r/20201202203817.438713-1-jernej.skrabec@siol.net Acked-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-20clk: s2mps11: Fix a resource leak in error handling paths in the probe functionChristophe JAILLET1-0/+1
Some resource should be released in the error handling path of the probe function, as already done in the remove function. The remove function was fixed in commit bf416bd45738 ("clk: s2mps11: Add missing of_node_put and of_clk_del_provider") Fixes: 7cc560dea415 ("clk: s2mps11: Add support for s2mps11") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/20201212122818.86195-1-christophe.jaillet@wanadoo.fr Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-20clk: mvebu: a3700: fix the XTAL MODE pin to MPP1_9Terry Zhou1-2/+2
There is an error in the current code that the XTAL MODE pin was set to NB MPP1_31 which should be NB MPP1_9. The latch register of NB MPP1_9 has different offset of 0x8. Signed-off-by: Terry Zhou <bjzhou@marvell.com> [pali: Fix pin name in commit message] Signed-off-by: Pali Rohár <pali@kernel.org> Fixes: 7ea8250406a6 ("clk: mvebu: Add the xtal clock for Armada 3700 SoC") Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20201106100039.11385-1-pali@kernel.org Reviewed-by: Marek Behún <kabel@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-20clk: si5351: Wait for bit clear after PLL resetSascha Hauer1-3/+10
Documentation states that SI5351_PLL_RESET_B and SI5351_PLL_RESET_A bits are self clearing bits, so wait until they are cleared before continuing. This fixes a case when the clock doesn't come up properly after a PLL reset. It worked properly when the frequency was below 900MHz, but with 900MHz it only works when we are waiting for the bit to clear. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Link: https://lore.kernel.org/r/20201130091033.1687-1-s.hauer@pengutronix.de Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-20clk: at91: sam9x60: remove atmel,osc-bypass supportAlexandre Belloni1-5/+1
The sam9x60 doesn't have the MOSCXTBY bit to enable the crystal oscillator bypass. Fixes: 01e2113de9a5 ("clk: at91: add sam9x60 pmc driver") Reported-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Link: https://lore.kernel.org/r/20201202125816.168618-1-alexandre.belloni@bootlin.com Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com> Tested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: register cpu clockClaudiu Beznea1-7/+6
Register CPU clock as being the master clock prescaler. This would be used by DVFS. The block schema of SAMA7G5's PMC contains also a divider between master clock prescaler and CPU (PMC_CPU_RATIO.RATIO) but the frequencies supported by SAMA7G5 could be directly received from CPUPLL + master clock prescaler and the extra divider would do no work in case it would be enabled. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-12-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-master: re-factor master clockClaudiu Beznea14-146/+542
Re-factor master clock driver by splitting it into 2 clocks: prescaller and divider clocks. Based on registered clock flags the prescaler's rate could be changed at runtime. This is necessary for platforms supporting DVFS (e.g. SAMA7G5) where master clock could be changed at run-time. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-11-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: do not allow cpu pll to go higher than 1GHzClaudiu Beznea1-14/+47
Since CPU PLL feeds both CPU clock and MCK0, MCK0 cannot go higher than 200MHz and MCK0 maximum prescaller is 5 limit the CPU PLL at 1GHz to avoid MCK0 overclocking while CPU PLL is changed by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-10-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: decrease lower limit for MCK0 rateClaudiu Beznea1-1/+1
On SAMA7G5 CPU clock is changed at run-time by DVFS. Since MCK0 and CPU clock shares the same parent clock (CPUPLL clock) the MCK0 is also changed by DVFS to avoid over/under clocking of MCK0 consumers. The lower limit is changed to be able to set MCK0 accordingly by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-9-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: remove mck0 from parent list of other clocksClaudiu Beznea1-29/+26
MCK0 is changed at runtime by DVFS. Due to this, since not all IPs are glitch free aware at MCK0 changes, remove MCK0 from parent list of other clocks (e.g. generic clock, programmable/system clock, MCKX). Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-8-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-sam9x60-pll: allow runtime changes for pllClaudiu Beznea4-41/+197
Allow runtime frequency changes for PLLs registered with proper flags. This is necessary for CPU PLL on SAMA7G5 which is used by DVFS. Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-7-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: add 5th divisor for mck0 layout and characteristicsEugen Hristev1-2/+2
This SoC has the 5th divisor for the mck0 master clock. Adapt the characteristics accordingly. Reported-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-6-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: clk-master: add 5th divisor for mck masterEugen Hristev2-2/+2
clk-master can have 5 divisors with a field width of 3 bits on some products. Change the mask and number of divisors accordingly. Reported-by: Mihai Sain <mihai.sain@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-5-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: allow SYS and CPU PLLs to be exported and referenced in DTEugen Hristev1-2/+4
Allow SYSPLL and CPUPLL to be referenced as a PMC_TYPE_CORE clock from phandle in DT. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea@microchip.com: adapt commit message, add CPU PLL] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-4-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19dt-bindings: clock: at91: add sama7g5 pll definesEugen Hristev1-3/+3
Add SAMA7G5 specific PLL defines to be referenced in a phandle as a PMC_TYPE_CORE clock. Suggested-by: Claudiu Beznea <claudiu.beznea@microchip.com> Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com> [claudiu.beznea@microchip.com: adapt comit message, adapt sama7g5.c] Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-3-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: at91: sama7g5: fix compilation errorClaudiu Beznea1-2/+4
pmc_data_allocate() has been changed. pmc_data_free() was removed. Adapt the code taking this into consideration. With this the programmable clocks were also saved in sama7g5_pmc so that they could be later referenced. Fixes: cb783bbbcf54 ("clk: at91: sama7g5: add clock support for sama7g5") Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com> Reviewed-by: Tudor Ambarus <tudor.ambarus@microchip.com> Tested-by: Tudor Ambarus <tudor.ambarus@microchip.com> Link: https://lore.kernel.org/r/1605800597-16720-2-git-send-email-claudiu.beznea@microchip.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: Add MODULE_DEVICE_TABLE()Nicolas Saenz Julienne1-0/+1
Add MODULE_DEVICE_TABLE() so as to be able to use the driver as a module. More precisely, for the driver to be loaded automatically at boot. Fixes: 1bc95972715a ("clk: bcm: Add BCM2711 DVP driver") Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Link: https://lore.kernel.org/r/20201202103518.21889-1-nsaenzjulienne@suse.de Reviewed-by: Maxime Ripard <mripard@kernel.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-19clk: bcm: dvp: drop a variable that is assigned to onlyUwe Kleine-König1-2/+1
The third parameter to devm_platform_get_and_ioremap_resource() is used only to provide the used resource. As this variable isn't used afterwards, switch to the function devm_platform_ioremap_resource() which doesn't provide this output parameter. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20201120132121.2678997-1-u.kleine-koenig@pengutronix.de Reviewed-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: Trace clk_set_rate() "range" functionsMaxime Ripard1-0/+6
The clk_set_rate "range" functions don't have any tracepoints even though it might be useful. Add some. Signed-off-by: Maxime Ripard <maxime@cerno.tech> Link: https://lore.kernel.org/r/20201207105050.2096917-1-maxime@cerno.tech [sboyd@kernel.org: Reword commit text] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: axi-clkgen: move the OF table at the bottom of the fileAlexandru Ardelean1-9/+9
The change is mostly cosmetic. No functional changes. Since the driver now uses of_device_get_match_data() to obtain some driver specific info, there is no need to define the OF table before the probe function. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201203074037.26940-2-alexandru.ardelean@analog.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: axi-clkgen: wrap limits in a struct and keep copy on the state objectAlexandru Ardelean1-17/+31
Up until the these limits were global/hard-coded, since they are typically limits of the fabric. However, since this is an FPGA generated clock, this may run on setups where one clock is on a fabric, and another one synthesized on another fabric connected via PCIe (or some other inter-connect, and then these limits need to be adjusted for each instance of the AXI CLKGEN. This change wraps the current constants in 'axi_clkgen_limits' struct and the 'axi_clkgen' instance keeps a copy of these limits, which is initialized at probe from the default limits. The limits are stored on the device-tree OF table, so that we can adjust them via the compatible string. Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Link: https://lore.kernel.org/r/20201203074037.26940-1-alexandru.ardelean@analog.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: ti: omap5: Fix reboot DPLL lock failure when using ABE TIMERsDavid Shah1-1/+11
Having the ABE DPLL ref and bypass muxes set to different inputs was causing the DPLL not to lock when TIMER8 was used, as it is in the Pyra for the backlight. This patch fixes this by setting abe_dpll_bypass_clk_mux to sys_32k_ck in omap5xxx_dt_clk_init. A similar patch may also be needed for OMAP44xx which has similar code in omap4xxx_dt_clk_init, but I have not added this as I have no hardware to test on. Signed-off-by: David Shah <dave@ds0.me> Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com> Link: https://lore.kernel.org/r/1d3abe2512054866cc2ea7b2592238f4fa06502a.1607253531.git.hns@goldelico.com Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: ti: Fix memleak in ti_fapll_synth_setupZhang Qilong1-2/+9
If clk_register fails, we should goto free branch before function returns to prevent memleak. Fixes: 163152cbbe321 ("clk: ti: Add support for FAPLL on dm816x") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Link: https://lore.kernel.org/r/20201113131623.2098222-1-zhangqilong3@huawei.com Acked-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: Add hardware-enable column to clk summaryDmitry Osipenko1-4/+11
Add "hardware enable" column to the clk summary in order to show actual hardware enable-state of all clocks. The possible states are "Y/N/?", where question mark means that state is unknown, i.e. clock isn't a mux and clk-driver doesn't support is_enabled() callback for this clock. In conjunction with clk_ignore_unused, this tells us what unused clocks are left enabled after bootloader. This is also a useful aid for debugging interactions with firmware which changes clock states without notifying kernel. Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201115203432.13934-1-digetx@gmail.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17clk: mediatek: Make mtk_clk_register_mux() a static functionWeiyi Lu2-5/+1
mtk_clk_register_mux() should be a static function Fixes: a3ae549917f16 ("clk: mediatek: Add new clkmux register API") Signed-off-by: Weiyi Lu <weiyi.lu@mediatek.com> Link: https://lore.kernel.org/r/1605256192-31307-1-git-send-email-weiyi.lu@mediatek.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-17Merge tag 'arm-soc-omap-genpd-5.11' of ↵Linus Torvalds3-1/+16
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC OMAP GenPD updates from Arnd Bergmann: "These are additional updates for the power domain support on OMAP, moving to an implementation based on device tree information instead of SoC specific code. This is the latest step in the ongoing process for moving code out of arch/arm/mach-omap2. I kept this separate from the other driver changes since it touches code in multiple areas" * tag 'arm-soc-omap-genpd-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (51 commits) ARM: OMAP2+: Fix am4 only build after genpd changes ARM: dts: Configure power domain for omap5 dss ARM: dts: omap5: add remaining PRM instances soc: ti: omap-prm: omap5: add genpd support for remaining PRM instances ARM: OMAP2+: Drop legacy platform data for dra7 gpmc ARM: dts: Configure interconnect target module for dra7 iva ARM: dts: dra7: add remaining PRM instances soc: ti: omap-prm: dra7: add genpd support for remaining PRM instances clk: ti: dra7: Drop idlest polling from IVA clkctrl clocks ARM: OMAP2+: Drop legacy platform data for omap4 gpmc ARM: OMAP2+: Drop legacy platform data for omap4 iva ARM: dts: Configure power domain for omap4 dsp ARM: dts: Configure power domain for omap4 dss ARM: dts: omap4: add remaining PRM instances soc: ti: omap-prm: omap4: add genpd support for remaining PRM instances clk: ti: omap4: Drop idlest polling from IVA clkctrl clocks ARM: OMAP2+: Drop legacy remaining legacy platform data for am4 ARM: dts: Use simple-pm-bus for genpd for am4 l3 ARM: dts: Move am4 l3 noc to a separate node ARM: dts: Use simple-pm-bus for genpd for am4 l4_per ...
2020-12-17Merge tag 'arm-soc-drivers-5.11' of ↵Linus Torvalds4-58/+155
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "There are a couple of subsystems maintained by other people that merge their drivers through the SoC tree, those changes include: - The SCMI firmware framework gains support for sensor notifications and for controlling voltage domains. - A large update for the Tegra memory controller driver, integrating it better with the interconnect framework - The memory controller subsystem gains support for Mediatek MT8192 - The reset controller framework gains support for sharing pulsed resets For Soc specific drivers in drivers/soc, the main changes are - The Allwinner/sunxi MBUS gets a rework for the way it handles dma_map_ops and offsets between physical and dma address spaces. - An errata fix plus some cleanups for Freescale Layerscape SoCs - A cleanup for renesas drivers regarding MMIO accesses. - New SoC specific drivers for Mediatek MT8192 and MT8183 power domains - New SoC specific drivers for Aspeed AST2600 LPC bus control and SoC identification. - Core Power Domain support for Qualcomm MSM8916, MSM8939, SDM660 and SDX55. - A rework of the TI AM33xx 'genpd' power domain support to use information from DT instead of platform data - Support for TI AM64x SoCs - Allow building some Amlogic drivers as modules instead of built-in Finally, there are numerous cleanups and smaller bug fixes for Mediatek, Tegra, Samsung, Qualcomm, TI OMAP, Amlogic, Rockchips, Renesas, and Xilinx SoCs" * tag 'arm-soc-drivers-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (222 commits) soc: mediatek: mmsys: Specify HAS_IOMEM dependency for MTK_MMSYS firmware: xilinx: Properly align function parameter firmware: xilinx: Add a blank line after function declaration firmware: xilinx: Remove additional newline firmware: xilinx: Fix kernel-doc warnings firmware: xlnx-zynqmp: fix compilation warning soc: xilinx: vcu: add missing register NUM_CORE soc: xilinx: vcu: use vcu-settings syscon registers dt-bindings: soc: xlnx: extract xlnx, vcu-settings to separate binding soc: xilinx: vcu: drop useless success message clk: samsung: mark PM functions as __maybe_unused soc: samsung: exynos-chipid: initialize later - with arch_initcall soc: samsung: exynos-chipid: order list of SoCs by name memory: jz4780_nemc: Fix potential NULL dereference in jz4780_nemc_probe() memory: ti-emif-sram: only build for ARMv7 memory: tegra30: Support interconnect framework memory: tegra20: Support hardware versioning and clean up OPP table initialization dt-bindings: memory: tegra20-emc: Document opp-supported-hw property soc: rockchip: io-domain: Fix error return code in rockchip_iodomain_probe() reset-controller: ti: force the write operation when assert or deassert ...
2020-12-16clk: sifive: Add clock enable and disable opsPragnesh Patel4-9/+93
Add new functions "sifive_prci_clock_enable(), sifive_prci_clock_disable() and sifive_clk_is_enabled()" to enable or disable the PRCI clock Signed-off-by: Pragnesh Patel <pragnesh.patel@sifive.com> Tested-by: Zong Li <zong.li@sifive.com> Link: https://lore.kernel.org/r/20201209094916.17383-6-zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-16clk: sifive: Fix the wrong bit field shiftZong Li1-2/+2
The clk enable bit should be 31 instead of 24. Signed-off-by: Zong Li <zong.li@sifive.com> Reported-by: Pragnesh Patel <pragnesh.patel@sifive.com> Link: https://lore.kernel.org/r/20201209094916.17383-5-zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-16clk: sifive: Add a driver for the SiFive FU740 PRCI IP blockZong Li6-3/+346
Add driver code for the SiFive FU740 PRCI IP block. This IP block handles reset and clock control for the SiFive FU740 device and implements SoC-level clock tree controls and dividers. The link of unmatched as follow, and the U740-C000 manual would be present in the same page as soon. https://www.sifive.com/boards/hifive-unmatched This driver contains bug fixes and contributions from Henry Styles <hes@sifive.com> Erik Danie <erik.danie@sifive.com> Pragnesh Patel <pragnesh.patel@sifive.com> Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Cc: Henry Styles <hes@sifive.com> Cc: Erik Danie <erik.danie@sifive.com> Cc: Pragnesh Patel <pragnesh.patel@sifive.com> Link: https://lore.kernel.org/r/20201209094916.17383-4-zong.li@sifive.com [sboyd@kernel.org: Include header to silence sparse] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-16clk: sifive: Use common name for prci configurationZong Li2-4/+4
Use generic name CLK_SIFIVE_PRCI instead of CLK_SIFIVE_FU540_PRCI. This patch is prepared for fu740 support. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> Link: https://lore.kernel.org/r/20201209094916.17383-3-zong.li@sifive.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-16clk: sifive: Extract prci core to common baseZong Li5-571/+641
Extract common core of prci driver to an independent file, it could allow other chips to reuse it. Separate SoCs-dependent code 'fu540' from prci core, then we can easily add 'fu740' later. Almost these changes are code movement. The different is adding the private data for each SoC use, so it needs to get match data in probe callback function, then use the data for initialization. Signed-off-by: Zong Li <zong.li@sifive.com> Reviewed-by: Pragnesh Patel <Pragnesh.patel@sifive.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Link: https://lore.kernel.org/r/20201209094916.17383-2-zong.li@sifive.com [sboyd@kernel.org: Include header to silence sparse] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-16Merge tag 'pm-5.11-rc1' of ↵Linus Torvalds1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These update cpufreq (core and drivers), cpuidle (polling state implementation and the PSCI driver), the OPP (operating performance points) framework, devfreq (core and drivers), the power capping RAPL (Running Average Power Limit) driver, the Energy Model support, the generic power domains (genpd) framework, the ACPI device power management, the core system-wide suspend code and power management utilities. Specifics: - Use local_clock() instead of jiffies in the cpufreq statistics to improve accuracy (Viresh Kumar). - Fix up OPP usage in the cpufreq-dt and qcom-cpufreq-nvmem cpufreq drivers (Viresh Kumar). - Clean up the cpufreq core, the intel_pstate driver and the schedutil cpufreq governor (Rafael Wysocki). - Fix up error code paths in the sti-cpufreq and mediatek cpufreq drivers (Yangtao Li, Qinglang Miao). - Fix cpufreq_online() to return error codes instead of success (0) in all cases when it fails (Wang ShaoBo). - Add mt8167 support to the mediatek cpufreq driver and blacklist mt8516 in the cpufreq-dt-platdev driver (Fabien Parent). - Modify the tegra194 cpufreq driver to always return values from the frequency table as the current frequency and clean up that driver (Sumit Gupta, Jon Hunter). - Modify the arm_scmi cpufreq driver to allow it to discover the power scale present in the performance protocol and provide this information to the Energy Model (Lukasz Luba). - Add missing MODULE_DEVICE_TABLE to several cpufreq drivers (Pali Rohár). - Clean up the CPPC cpufreq driver (Ionela Voinescu). - Fix NVMEM_IMX_OCOTP dependency in the imx cpufreq driver (Arnd Bergmann). - Rework the poling interval selection for the polling state in cpuidle (Mel Gorman). - Enable suspend-to-idle for PSCI OSI mode in the PSCI cpuidle driver (Ulf Hansson). - Modify the OPP framework to support empty (node-less) OPP tables in DT for passing dependency information (Nicola Mazzucato). - Fix potential lockdep issue in the OPP core and clean up the OPP core (Viresh Kumar). - Modify dev_pm_opp_put_regulators() to accept a NULL argument and update its users accordingly (Viresh Kumar). - Add frequency changes tracepoint to devfreq (Matthias Kaehlcke). - Add support for governor feature flags to devfreq, make devfreq sysfs file permissions depend on the governor and clean up the devfreq core (Chanwoo Choi). - Clean up the tegra20 devfreq driver and deprecate it to allow another driver based on EMC_STAT to be used instead of it (Dmitry Osipenko). - Add interconnect support to the tegra30 devfreq driver, allow it to take the interconnect and OPP information from DT and clean it up (Dmitry Osipenko). - Add interconnect support to the exynos-bus devfreq driver along with interconnect properties documentation (Sylwester Nawrocki). - Add suport for AMD Fam17h and Fam19h processors to the RAPL power capping driver (Victor Ding, Kim Phillips). - Fix handling of overly long constraint names in the powercap framework (Lukasz Luba). - Fix the wakeup configuration handling for bridges in the ACPI device power management core (Rafael Wysocki). - Add support for using an abstract scale for power units in the Energy Model (EM) and document it (Lukasz Luba). - Add em_cpu_energy() micro-optimization to the EM (Pavankumar Kondeti). - Modify the generic power domains (genpd) framwework to support suspend-to-idle (Ulf Hansson). - Fix creation of debugfs nodes in genpd (Thierry Strudel). - Clean up genpd (Lina Iyer). - Clean up the core system-wide suspend code and make it print driver flags for devices with debug enabled (Alex Shi, Patrice Chotard, Chen Yu). - Modify the ACPI system reboot code to make it prepare for system power off to avoid confusing the platform firmware (Kai-Heng Feng). - Update the pm-graph (multiple changes, mostly usability-related) and cpupower (online and offline CPU information support) PM utilities (Todd Brandt, Brahadambal Srinivasan)" * tag 'pm-5.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (86 commits) cpufreq: Fix cpufreq_online() return value on errors cpufreq: Fix up several kerneldoc comments cpufreq: stats: Use local_clock() instead of jiffies cpufreq: schedutil: Simplify sugov_update_next_freq() cpufreq: intel_pstate: Simplify intel_cpufreq_update_pstate() PM: domains: create debugfs nodes when adding power domains opp: of: Allow empty opp-table with opp-shared dt-bindings: opp: Allow empty OPP tables media: venus: dev_pm_opp_put_*() accepts NULL argument drm/panfrost: dev_pm_opp_put_*() accepts NULL argument drm/lima: dev_pm_opp_put_*() accepts NULL argument PM / devfreq: exynos: dev_pm_opp_put_*() accepts NULL argument cpufreq: qcom-cpufreq-nvmem: dev_pm_opp_put_*() accepts NULL argument cpufreq: dt: dev_pm_opp_put_regulators() accepts NULL argument opp: Allow dev_pm_opp_put_*() APIs to accept NULL opp_table opp: Don't create an OPP table from dev_pm_opp_get_opp_table() cpufreq: dt: Don't (ab)use dev_pm_opp_get_opp_table() to create OPP table opp: Reduce the size of critical section in _opp_kref_release() PM / EM: Micro optimization in em_cpu_energy cpufreq: arm_scmi: Discover the power scale in performance protocol ...
2020-12-11Merge tag 'devfreq-next-for-5.11' of ↵Rafael J. Wysocki1-0/+3
git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux Pull devfreq updates for 5.11 from Chanwoo Choi: 1. Update devfreq core - Add new devfreq_frequency tracepoint to show the frequency change information. - Add governor feature flag. The devfreq governor is able to set the specific flag in order to support a non-common feature. For example, if the governor supports the 'immutable' feature, don't allow user space to change the governor via sysfs. - Add governor sysfs attribute flag for each sysfs file. Prior to that the devfreq subsystem allowed all of the sysfs files to be accessed regardless of the governor type. But some sysfs fils are not supported by specific devfreq governors. In order to only allow the sysfs files supported by the governor to be accessed, clarify the access permissions of sysfs attributes according to the governor. When adding the devfreq governor, specify the available attribute information by using DEVFREQ_GOV_ATTR_* symbols. The user can read or write the sysfs attributes in accordance to the specified access permissions. - Clean-up the code to reduce duplication for the devfreq tracepoint and to remove redundant governor_name field from struct devfreq. 2. Update exynos-bus.c devfreq driver - Add interconnect API support to the Samsung Exynos Bus Frequency driver, exynos-bus.c. Complementing the devfreq driver with interconnect functionality allows to ensure that the QoS requirements regarding devices accessing the system memory (e.g. video processing devices) will be met and allows to avoid issues like DMA underrun. 3. Update tegra devfreq driver - Add interconnect support and OPP interface to tegra30-devfreq.c. Also, it is to guarantee the QoS requirement of some devices like the display controller. - Move tegra20-devfreq.c from drivers/devfreq/ into drivers/memory/tegra/ in order to use the more proper monitoring feature such as EMC_STAT which is located in drivers/memory/tegra/. - Separate the configuration information for different SoCs in tegra30-devfrqe.c. The tegra30-devfreq.c had been supporting both tegra30-actmon and tegra124-actmon devices. In order to use the more correct configuration data, separate them. - Use dev_err_probe() to handle the deferred probe error in tegra30-devfreq.c. 4. Pull the request of 'Tegra SoC and clock controller changes for v5.11' sent by Krzysztof Kozlowski <krzk@kernel.org> in order to avoid a build error." * tag 'devfreq-next-for-5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/chanwoo/linux: PM / devfreq: tegra30: Separate configurations per-SoC generation PM / devfreq: tegra30: Support interconnect and OPPs from device-tree PM / devfreq: tegra20: Deprecate in a favor of emc-stat based driver PM / devfreq: exynos-bus: Add registration of interconnect child device dt-bindings: devfreq: Add documentation for the interconnect properties soc/tegra: fuse: Add stub for tegra_sku_info soc/tegra: fuse: Export tegra_read_ram_code() clk: tegra: Export Tegra20 EMC kernel symbols PM / devfreq: tegra30: Silence deferred probe error PM / devfreq: tegra20: Relax Kconfig dependency PM / devfreq: tegra20: Silence deferred probe error PM / devfreq: Remove redundant governor_name from struct devfreq PM / devfreq: Add governor attribute flag for specifc sysfs nodes PM / devfreq: Add governor feature flag PM / devfreq: Add tracepoint for frequency changes PM / devfreq: Unify frequency change to devfreq_update_target func trace: events: devfreq: Use fixed indentation size to improve readability
2020-12-10clk: tegra: Fix duplicated SE clock entryDmitry Osipenko2-1/+2
The periph_clks[] array contains duplicated entry for Security Engine clock which was meant to be defined for T210, but it wasn't added properly. This patch corrects the T210 SE entry and fixes the following error message on T114/T124: "Tegra clk 127: register failed with -17". Fixes: dc37fec48314 ("clk: tegra: periph: Add new periph clks and muxes for Tegra210") Tested-by Nicolas Chauvet <kwizart@gmail.com> Reported-by Nicolas Chauvet <kwizart@gmail.com> Signed-off-by: Dmitry Osipenko <digetx@gmail.com> Link: https://lore.kernel.org/r/20201025224212.7790-1-digetx@gmail.com Acked-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: rpmh: add support for SM8350 rpmh clocksVinod Koul1-12/+46
This adds the RPMH clocks present in SM8350 SoC Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Vinod Koul <vkoul@kernel.org> Link: https://lore.kernel.org/r/20201208064702.3654324-3-vkoul@kernel.org [sboyd@kernel.org: Move sdx55 to the right place] Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: lpasscc: Introduce pm autosuspend for SC7180Taniya Das1-1/+9
The LPASSCC driver's suspend/resume is invoked multiple number of times and thus allow the device to autosuspend for 500ms. Signed-off-by: Taniya Das <tdas@codeaurora.org> Link: https://lore.kernel.org/r/1605890417-721-1-git-send-email-tdas@codeaurora.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2Douglas Anderson1-0/+1
50 MHz is an incredibly common clock rate for SD cards to run at. It's "high speed" mode in SD (not very fast these days, but it used to be) or: #define HIGH_SPEED_MAX_DTR 50000000 If we don't support this then older "high speed" cards can only run at 25 MHz or at half their normal speed. There doesn't seem to be any reason to skip this clock rate, so add it. Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20201210102234.2.I26dcc0cee374f5571d9929c9985f463773167e68@changeid Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: qcom: gcc-sc7180: Use floor ops for sdcc clksDouglas Anderson1-2/+2
I would repeat the same commit message that was in commit 5e4b7e82d497 ("clk: qcom: gcc-sdm845: Use floor ops for sdcc clks") but it seems silly to do so when you could just go read that commit. NOTE: this is actually extra terrible because we're missing the 50 MHz rate in the table (see the next patch AKA ("clk: qcom: gcc-sc7180: Add 50 MHz clock rate for SDC2")). That means then when you run an older SD card it'll try to clock it at 100 MHz when it's only specced to run at 50 MHz max. As you can probably guess that doesn't work super well. Signed-off-by: Douglas Anderson <dianders@chromium.org> Fixes: 17269568f726 ("clk: qcom: Add Global Clock controller (GCC) driver for SC7180") Link: https://lore.kernel.org/r/20201210102234.1.I096779f219625148900fc984dd0084ed1ba87c7f@changeid Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: scpi: mark scpi_clk_match as maybe unusedKrzysztof Kozlowski1-1/+1
The scpi_clk_match (struct of_device_id) is referenced only with CONFIG_OF builds thus mark it as __maybe_unused: drivers/clk/clk-scpi.c:132:34: warning: ‘scpi_clk_match’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201103162435.13689-8-krzk@kernel.org Acked-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: pwm: drop of_match_ptr from of_device_id tableKrzysztof Kozlowski1-1/+1
The driver can match only via the DT table so the table should be always used and the of_match_ptr does not have any sense (this also allows ACPI matching via PRP0001, even though it might be not relevant here). This fixes compile warning (!CONFIG_OF && !CONFIG_MODULES): drivers/clk/clk-pwm.c:139:34: warning: ‘clk_pwm_dt_ids’ defined but not used [-Wunused-const-variable=] Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Link: https://lore.kernel.org/r/20201103162435.13689-1-krzk@kernel.org Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-12-10clk: renesas: sh73a0: Stop using __raw_*() I/O accessorsGeert Uytterhoeven1-1/+1
There is no reason to keep on using the __raw_{read,write}l() I/O accessors in Renesas ARM driver code. Switch to using the plain {read,write}l() I/O accessors, to have a chance that this works on big-endian. Suggested-by: Arnd Bergmann <arnd@kernel.org> Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Stephen Boyd <sboyd@kernel.org> Link: https://lore.kernel.org/r/20201119125053.4065746-1-geert+renesas@glider.be
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-24 06:07:18 +0300