summaryrefslogtreecommitdiff
path: root/drivers/char
AgeCommit message (Collapse)AuthorFilesLines
2018-11-15Merge tag 'v4.18.19' into dev-4.18Joel Stanley3-6/+9
This is the 4.18.19 stable release Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-11-13tpm: Restore functionality to xen vtpm driver.Dr. Greg Wettstein1-1/+1
commit e487a0f52301293152a6f8c4e217f2a11dd808e3 upstream. Functionality of the xen-tpmfront driver was lost secondary to the introduction of xenbus multi-page support in commit ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring"). In this commit pointer to location of where the shared page address is stored was being passed to the xenbus_grant_ring() function rather then the address of the shared page itself. This resulted in a situation where the driver would attach to the vtpm-stubdom but any attempt to send a command to the stub domain would timeout. A diagnostic finding for this regression is the following error message being generated when the xen-tpmfront driver probes for a device: <3>vtpm vtpm-0: tpm_transmit: tpm_send: error -62 <3>vtpm vtpm-0: A TPM error (-62) occurred attempting to determine the timeouts This fix is relevant to all kernels from 4.1 forward which is the release in which multi-page xenbus support was introduced. Daniel De Graaf formulated the fix by code inspection after the regression point was located. Fixes: ccc9d90a9a8b ("xenbus_client: Extend interface to support multi-page ring") Signed-off-by: Dr. Greg Wettstein <greg@enjellic.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> [boris: Updated commit message, added Fixes tag] Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: stable@vger.kernel.org # v4.1+ Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-11-13tpm: suppress transmit cmd error logs when TPM 1.2 is disabled/deactivatedJavier Martinez Canillas1-1/+2
[ Upstream commit 0d6d0d62d9505a9816716aa484ebd0b04c795063 ] For TPM 1.2 chips the system setup utility allows to set the TPM device in one of the following states: * Active: Security chip is functional * Inactive: Security chip is visible, but is not functional * Disabled: Security chip is hidden and is not functional When choosing the "Inactive" state, the TPM 1.2 device is enumerated and registered, but sending TPM commands fail with either TPM_DEACTIVATED or TPM_DISABLED depending if the firmware deactivated or disabled the TPM. Since these TPM 1.2 error codes don't have special treatment, inactivating the TPM leads to a very noisy kernel log buffer that shows messages like the following: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: A TPM error (6) occurred attempting to read a pcr value tpm tpm0: TPM is disabled/deactivated (0x6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting to read a pcr value ima: No TPM chip found, activating TPM-bypass! (rc=6) tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random tpm tpm0: A TPM error (6) occurred attempting get random Let's just suppress error log messages for the TPM_{DEACTIVATED,DISABLED} return codes, since this is expected when the TPM 1.2 is set to Inactive. In that case the kernel log is cleaner and less confusing for users, i.e: tpm_tis 00:05: 1.2 TPM (device-id 0x0, rev-id 78) tpm tpm0: TPM is disabled/deactivated (0x6) ima: No TPM chip found, activating TPM-bypass! (rc=6) Reported-by: Hans de Goede <hdegoede@redhat.com> Signed-off-by: Javier Martinez Canillas <javierm@redhat.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-11-13ipmi: Fix timer race with module unloadJan Glauber1-4/+6
commit 0711e8c1b4572d076264e71b0002d223f2666ed7 upstream. Please note that below oops is from an older kernel, but the same race seems to be present in the upstream kernel too. ---8<--- The following panic was encountered during removing the ipmi_ssif module: [ 526.352555] Unable to handle kernel paging request at virtual address ffff000006923090 [ 526.360464] Mem abort info: [ 526.363257] ESR = 0x86000007 [ 526.366304] Exception class = IABT (current EL), IL = 32 bits [ 526.372221] SET = 0, FnV = 0 [ 526.375269] EA = 0, S1PTW = 0 [ 526.378405] swapper pgtable: 4k pages, 48-bit VAs, pgd = 000000008ae60416 [ 526.385185] [ffff000006923090] *pgd=000000bffcffe803, *pud=000000bffcffd803, *pmd=0000009f4731a003, *pte=0000000000000000 [ 526.396141] Internal error: Oops: 86000007 [#1] SMP [ 526.401008] Modules linked in: nls_iso8859_1 ipmi_devintf joydev input_leds ipmi_msghandler shpchp sch_fq_codel ib_iser rdma_cm iw_cm ib_cm ib_core iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi ip_tables x_tables autofs4 btrfs zstd_compress raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor async_tx xor raid6_pq libcrc32c raid1 raid0 multipath linear i2c_smbus hid_generic usbhid uas hid usb_storage ast aes_ce_blk i2c_algo_bit aes_ce_cipher qede ttm crc32_ce ptp crct10dif_ce drm_kms_helper ghash_ce syscopyarea sha2_ce sysfillrect sysimgblt pps_core fb_sys_fops sha256_arm64 sha1_ce mpt3sas qed drm raid_class ahci scsi_transport_sas libahci gpio_xlp i2c_xlp9xx aes_neon_bs aes_neon_blk crypto_simd cryptd aes_arm64 [last unloaded: ipmi_ssif] [ 526.468085] CPU: 125 PID: 0 Comm: swapper/125 Not tainted 4.15.0-35-generic #38~lp1775396+build.1 [ 526.476942] Hardware name: To be filled by O.E.M. Saber/Saber, BIOS 0ACKL022 08/14/2018 [ 526.484932] pstate: 00400009 (nzcv daif +PAN -UAO) [ 526.489713] pc : 0xffff000006923090 [ 526.493198] lr : call_timer_fn+0x34/0x178 [ 526.497194] sp : ffff000009b0bdd0 [ 526.500496] x29: ffff000009b0bdd0 x28: 0000000000000082 [ 526.505796] x27: 0000000000000002 x26: ffff000009515188 [ 526.511096] x25: ffff000009515180 x24: ffff0000090f1018 [ 526.516396] x23: ffff000009519660 x22: dead000000000200 [ 526.521696] x21: ffff000006923090 x20: 0000000000000100 [ 526.526995] x19: ffff809eeb466a40 x18: 0000000000000000 [ 526.532295] x17: 000000000000000e x16: 0000000000000007 [ 526.537594] x15: 0000000000000000 x14: 071c71c71c71c71c [ 526.542894] x13: 0000000000000000 x12: 0000000000000000 [ 526.548193] x11: 0000000000000001 x10: ffff000009b0be88 [ 526.553493] x9 : 0000000000000000 x8 : 0000000000000005 [ 526.558793] x7 : ffff80befc1f8528 x6 : 0000000000000020 [ 526.564092] x5 : 0000000000000040 x4 : 0000000020001b20 [ 526.569392] x3 : 0000000000000000 x2 : ffff809eeb466a40 [ 526.574692] x1 : ffff000006923090 x0 : ffff809eeb466a40 [ 526.579992] Process swapper/125 (pid: 0, stack limit = 0x000000002eb50acc) [ 526.586854] Call trace: [ 526.589289] 0xffff000006923090 [ 526.592419] expire_timers+0xc8/0x130 [ 526.596070] run_timer_softirq+0xec/0x1b0 [ 526.600070] __do_softirq+0x134/0x328 [ 526.603726] irq_exit+0xc8/0xe0 [ 526.606857] __handle_domain_irq+0x6c/0xc0 [ 526.610941] gic_handle_irq+0x84/0x188 [ 526.614679] el1_irq+0xe8/0x180 [ 526.617822] cpuidle_enter_state+0xa0/0x328 [ 526.621993] cpuidle_enter+0x34/0x48 [ 526.625564] call_cpuidle+0x44/0x70 [ 526.629040] do_idle+0x1b8/0x1f0 [ 526.632256] cpu_startup_entry+0x2c/0x30 [ 526.636174] secondary_start_kernel+0x11c/0x130 [ 526.640694] Code: bad PC value [ 526.643800] ---[ end trace d020b0b8417c2498 ]--- [ 526.648404] Kernel panic - not syncing: Fatal exception in interrupt [ 526.654778] SMP: stopping secondary CPUs [ 526.658734] Kernel Offset: disabled [ 526.662211] CPU features: 0x5800c38 [ 526.665688] Memory Limit: none [ 526.668768] ---[ end Kernel panic - not syncing: Fatal exception in interrupt Prevent mod_timer from arming a timer that was already removed by del_timer during module unload. Signed-off-by: Jan Glauber <jglauber@cavium.com> Cc: <stable@vger.kernel.org> # 3.19 Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-10-22/dev/mem: add a devmem kernel parameter to activate the deviceCédric Le Goater2-0/+21
For security reasons, some configuration needs to run without /dev/mem but on some occasions, to debug HW for instance, it's still useful to be able to reboot the system with access to physical memory. Add a kernel parameter which activates the /dev/mem device only when 'mem.devmem' is enabled. OpenBMC-Staging-Count: 1 Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Joel Stanley <joel@jms.id.au>
2018-09-26ipmi: Fix I2C client removal in the SSIF driverCorey Minyard1-11/+6
commit 0745dde62835be7e2afe62fcdb482fcad79cb743 upstream. The SSIF driver was removing any client that came in through the platform interface, but it should only remove clients that it added. On a failure in the probe function, this could result in the following oops when the driver is removed and the client gets unregistered twice: CPU: 107 PID: 30266 Comm: rmmod Not tainted 4.18.0+ #80 Hardware name: Cavium Inc. Saber/Saber, BIOS Cavium reference firmware version 7.0 08/04/2018 pstate: 60400009 (nZCv daif +PAN -UAO) pc : kernfs_find_ns+0x28/0x120 lr : kernfs_find_and_get_ns+0x40/0x60 sp : ffff00002310fb50 x29: ffff00002310fb50 x28: ffff800a8240f800 x27: 0000000000000000 x26: 0000000000000000 x25: 0000000056000000 x24: ffff000009073000 x23: ffff000008998b38 x22: 0000000000000000 x21: ffff800ed86de820 x20: 0000000000000000 x19: ffff00000913a1d8 x18: 0000000000000000 x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000000 x14: 5300737265766972 x13: 643d4d4554535953 x12: 0000000000000030 x11: 0000000000000030 x10: 0101010101010101 x9 : ffff800ea06cc3f9 x8 : 0000000000000000 x7 : 0000000000000141 x6 : ffff000009073000 x5 : ffff800adb706b00 x4 : 0000000000000000 x3 : 00000000ffffffff x2 : 0000000000000000 x1 : ffff000008998b38 x0 : ffff000008356760 Process rmmod (pid: 30266, stack limit = 0x00000000e218418d) Call trace: kernfs_find_ns+0x28/0x120 kernfs_find_and_get_ns+0x40/0x60 sysfs_unmerge_group+0x2c/0x6c dpm_sysfs_remove+0x34/0x70 device_del+0x58/0x30c device_unregister+0x30/0x7c i2c_unregister_device+0x84/0x90 [i2c_core] ssif_platform_remove+0x38/0x98 [ipmi_ssif] platform_drv_remove+0x2c/0x6c device_release_driver_internal+0x168/0x1f8 driver_detach+0x50/0xbc bus_remove_driver+0x74/0xe8 driver_unregister+0x34/0x5c platform_driver_unregister+0x20/0x2c cleanup_ipmi_ssif+0x50/0xd82c [ipmi_ssif] __arm64_sys_delete_module+0x1b4/0x220 el0_svc_handler+0x104/0x160 el0_svc+0x8/0xc Code: aa1e03e0 aa0203f6 aa0103f7 d503201f (7940e280) ---[ end trace 09f0e34cce8e2d8c ]--- Kernel panic - not syncing: Fatal exception SMP: stopping secondary CPUs Kernel Offset: disabled CPU features: 0x23800c38 So track the clients that the SSIF driver adds and only remove those. Reported-by: George Cherian <george.cherian@cavium.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: George Cherian <george.cherian@cavium.com> Cc: <stable@vger.kernel.org> # 4.14.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26ipmi: Move BT capabilities detection to the detect callCorey Minyard1-44/+48
commit c86ba91be75702c013bbf7379542920b6920e98f upstream. The capabilities detection was being done as part of the normal state machine, but it was possible for it to be running while the upper layers of the IPMI driver were initializing the device, resulting in error and failure to initialize. Move the capabilities detection to the the detect function, so it's done before anything else runs on the device. This also simplifies the state machine and removes some code, as a bonus. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reported-by: Andrew Banman <abanman@hpe.com> Tested-by: Andrew Banman <abanman@hpe.com> Cc: <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-26ipmi: Rework SMI registration failureCorey Minyard3-46/+37
commit 2512e40e48d21d8bac09f7e91d2c3ceb2d3b50b2 upstream. There were certain situations where ipmi_register_smi() would return a failure, but the interface would still be registered and would need to be unregistered. This is obviously a bad design and resulted in an oops in certain failure cases. If the interface is started up in ipmi_register_smi(), then an error occurs, shut down the interface there so the cleanup can be done properly. Fix the various smi users, too. Signed-off-by: Corey Minyard <cminyard@mvista.com> Reported-by: Justin Ernst <justin.ernst@hpe.com> Tested-by: Justin Ernst <justin.ernst@hpe.com> Cc: Andrew Banman <abanman@hpe.com> Cc: Russ Anderson <russ.anderson@hpe.com> Cc: <stable@vger.kernel.org> # 4.18.x Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19tpm/tpm_i2c_infineon: switch to i2c_lock_bus(..., I2C_LOCK_SEGMENT)Peter Rosin1-4/+4
[ Upstream commit bb853aac2c478ce78116128263801189408ad2a8 ] Locking the root adapter for __i2c_transfer will deadlock if the device sits behind a mux-locked I2C mux. Switch to the finer-grained i2c_lock_bus with the I2C_LOCK_SEGMENT flag. If the device does not sit behind a mux-locked mux, the two locking variants are equivalent. Signed-off-by: Peter Rosin <peda@axentia.se> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Alexander Steffen <Alexander.Steffen@infineon.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-19tpm_tis_spi: Pass the SPI IRQ down to the driverLinus Walleij1-1/+8
[ Upstream commit 1a339b658d9dbe1471f67b78237cf8fa08bbbeb5 ] An SPI TPM device managed directly on an embedded board using the SPI bus and some GPIO or similar line as IRQ handler will pass the IRQn from the TPM device associated with the SPI device. This is already handled by the SPI core, so make sure to pass this down to the core as well. (The TPM core habit of using -1 to signal no IRQ is dubious (as IRQ 0 is NO_IRQ) but I do not want to mess with that semantic in this patch.) Cc: Mark Brown <broonie@kernel.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Sasha Levin <alexander.levin@microsoft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05tpm: separate cmd_ready/go_idle from runtime_pmTomas Winkler4-92/+88
commit 627448e85c766587f6fdde1ea3886d6615081c77 upstream. Fix tpm ptt initialization error: tpm tpm0: A TPM error (378) occurred get tpm pcr allocation. We cannot use go_idle cmd_ready commands via runtime_pm handles as with the introduction of localities this is no longer an optional feature, while runtime pm can be not enabled. Though cmd_ready/go_idle provides a power saving, it's also a part of TPM2 protocol and should be called explicitly. This patch exposes cmd_read/go_idle via tpm class ops and removes runtime pm support as it is not used by any driver. When calling from nested context always use both flags: TPM_TRANSMIT_UNLOCKED and TPM_TRANSMIT_RAW. Both are needed to resolve tpm spaces and locality request recursive calls to tpm_transmit(). TPM_TRANSMIT_RAW should never be used standalone as it will fail on double locking. While TPM_TRANSMIT_UNLOCKED standalone should be called from non-recursive locked contexts. New wrappers are added tpm_cmd_ready() and tpm_go_idle() to streamline tpm_try_transmit code. tpm_crb no longer needs own power saving functions and can drop using tpm_pm_suspend/resume. This patch cannot be really separated from the locality fix. Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Cc: stable@vger.kernel.org Fixes: 888d867df441 (tpm: cmd_ready command can be issued only after granting locality) Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-09-05tpm: Return the actual size when receiving an unsupported commandRicardo Schwarzmeier1-1/+1
commit 36a11029b07ee30bdc4553274d0efea645ed9d91 upstream. The userpace expects to read the number of bytes stated in the header. Returning the size of the buffer instead would be unexpected. Cc: stable@vger.kernel.org Fixes: 095531f891e6 ("tpm: return a TPM_RC_COMMAND_CODE response if command is not implemented") Signed-off-by: Ricardo Schwarzmeier <Ricardo.Schwarzmeier@infineon.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-07-29Merge tag 'random_for_linus_stable' of ↵Linus Torvalds1-1/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random fixes from Ted Ts'o: "In reaction to the fixes to address CVE-2018-1108, some Linux distributions that have certain systemd versions in some cases combined with patches to libcrypt for FIPS/FEDRAMP compliance, have led to boot-time stalls for some hardware. The reaction by some distros and Linux sysadmins has been to install packages that try to do complicated things with the CPU and hope that leads to randomness. To mitigate this, if RDRAND is available, mix it into entropy provided by userspace. It won't hurt, and it will probably help" * tag 'random_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: random: mix rdrand with entropy sent in from userspace
2018-07-27mm: fix vma_is_anonymous() false-positivesKirill A. Shutemov1-0/+1
vma_is_anonymous() relies on ->vm_ops being NULL to detect anonymous VMA. This is unreliable as ->mmap may not set ->vm_ops. False-positive vma_is_anonymous() may lead to crashes: next ffff8801ce5e7040 prev ffff8801d20eca50 mm ffff88019c1e13c0 prot 27 anon_vma ffff88019680cdd8 vm_ops 0000000000000000 pgoff 0 file ffff8801b2ec2d00 private_data 0000000000000000 flags: 0xff(read|write|exec|shared|mayread|maywrite|mayexec|mayshare) ------------[ cut here ]------------ kernel BUG at mm/memory.c:1422! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 18486 Comm: syz-executor3 Not tainted 4.18.0-rc3+ #136 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:zap_pmd_range mm/memory.c:1421 [inline] RIP: 0010:zap_pud_range mm/memory.c:1466 [inline] RIP: 0010:zap_p4d_range mm/memory.c:1487 [inline] RIP: 0010:unmap_page_range+0x1c18/0x2220 mm/memory.c:1508 Call Trace: unmap_single_vma+0x1a0/0x310 mm/memory.c:1553 zap_page_range_single+0x3cc/0x580 mm/memory.c:1644 unmap_mapping_range_vma mm/memory.c:2792 [inline] unmap_mapping_range_tree mm/memory.c:2813 [inline] unmap_mapping_pages+0x3a7/0x5b0 mm/memory.c:2845 unmap_mapping_range+0x48/0x60 mm/memory.c:2880 truncate_pagecache+0x54/0x90 mm/truncate.c:800 truncate_setsize+0x70/0xb0 mm/truncate.c:826 simple_setattr+0xe9/0x110 fs/libfs.c:409 notify_change+0xf13/0x10f0 fs/attr.c:335 do_truncate+0x1ac/0x2b0 fs/open.c:63 do_sys_ftruncate+0x492/0x560 fs/open.c:205 __do_sys_ftruncate fs/open.c:215 [inline] __se_sys_ftruncate fs/open.c:213 [inline] __x64_sys_ftruncate+0x59/0x80 fs/open.c:213 do_syscall_64+0x1b9/0x820 arch/x86/entry/common.c:290 entry_SYSCALL_64_after_hwframe+0x49/0xbe Reproducer: #include <stdio.h> #include <stddef.h> #include <stdint.h> #include <stdlib.h> #include <string.h> #include <sys/types.h> #include <sys/stat.h> #include <sys/ioctl.h> #include <sys/mman.h> #include <unistd.h> #include <fcntl.h> #define KCOV_INIT_TRACE _IOR('c', 1, unsigned long) #define KCOV_ENABLE _IO('c', 100) #define KCOV_DISABLE _IO('c', 101) #define COVER_SIZE (1024<<10) #define KCOV_TRACE_PC 0 #define KCOV_TRACE_CMP 1 int main(int argc, char **argv) { int fd; unsigned long *cover; system("mount -t debugfs none /sys/kernel/debug"); fd = open("/sys/kernel/debug/kcov", O_RDWR); ioctl(fd, KCOV_INIT_TRACE, COVER_SIZE); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_SHARED, fd, 0); munmap(cover, COVER_SIZE * sizeof(unsigned long)); cover = mmap(NULL, COVER_SIZE * sizeof(unsigned long), PROT_READ | PROT_WRITE, MAP_PRIVATE, fd, 0); memset(cover, 0, COVER_SIZE * sizeof(unsigned long)); ftruncate(fd, 3UL << 20); return 0; } This can be fixed by assigning anonymous VMAs own vm_ops and not relying on it being NULL. If ->mmap() failed to set ->vm_ops, mmap_region() will set it to dummy_vm_ops. This way we will have non-NULL ->vm_ops for all VMAs. Link: http://lkml.kernel.org/r/20180724121139.62570-4-kirill.shutemov@linux.intel.com Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Reported-by: syzbot+3f84280d52be9b7083cc@syzkaller.appspotmail.com Acked-by: Linus Torvalds <torvalds@linux-foundation.org> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-07-18random: mix rdrand with entropy sent in from userspaceTheodore Ts'o1-1/+9
Fedora has integrated the jitter entropy daemon to work around slow boot problems, especially on VM's that don't support virtio-rng: https://bugzilla.redhat.com/show_bug.cgi?id=1572944 It's understandable why they did this, but the Jitter entropy daemon works fundamentally on the principle: "the CPU microarchitecture is **so** complicated and we can't figure it out, so it *must* be random". Yes, it uses statistical tests to "prove" it is secure, but AES_ENCRYPT(NSA_KEY, COUNTER++) will also pass statistical tests with flying colors. So if RDRAND is available, mix it into entropy submitted from userspace. It can't hurt, and if you believe the NSA has backdoored RDRAND, then they probably have enough details about the Intel microarchitecture that they can reverse engineer how the Jitter entropy daemon affects the microarchitecture, and attack its output stream. And if RDRAND is in fact an honest DRNG, it will immeasurably improve on what the Jitter entropy daemon might produce. This also provides some protection against someone who is able to read or set the entropy seed file. Signed-off-by: Theodore Ts'o <tytso@mit.edu> Cc: stable@vger.kernel.org Cc: Arnd Bergmann <arnd@arndb.de>
2018-07-10char: amd64-agp: Use 64-bit arithmetic instead of 32-bitGustavo A. R. Silva1-2/+2
Cast *tmp* and *nb_base* to u64 in order to give the compiler complete information about the proper arithmetic to use. Notice that such variables are used in contexts that expect expressions of type u64 (64 bits, unsigned) and the following expressions are currently being evaluated using 32-bit arithmetic: tmp << 25 nb_base << 25 Addresses-Coverity-ID: 200586 ("Unintentional integer overflow") Addresses-Coverity-ID: 200587 ("Unintentional integer overflow") Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-10char: agp: Change return type to vm_fault_tSouptick Joarder1-1/+1
Use new return type vm_fault_t for fault handler. For now, this is just documenting that the function returns a VM_FAULT value rather than an errno. Once all instances are converted, vm_fault_t will become a distinct type. Ref-> commit 1c8f422059ae ("mm: change return type to vm_fault_t") was added in 4.17-rc1 to introduce the new typedef vm_fault_t. Currently we are making change to all drivers to return vm_fault_t for page fault handlers. As part of that char/agp driver is also getting changed to return vm_fault_t type from fault handler. Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com> Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2018-07-08Merge tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmiLinus Torvalds2-23/+14
Pull IPMI fixes from Corey Minyard: "A couple of small fixes: one to the BMC side of things that fixes an interrupt issue, and one oops fix if init fails in a certain way on the client driver" * tag 'for-linus-4.18-2' of git://github.com/cminyard/linux-ipmi: ipmi: kcs_bmc: fix IRQ exception if the channel is not open ipmi: Cleanup oops on initialization failure
2018-06-28Revert changes to convert to ->poll_mask() and aio IOCB_CMD_POLLLinus Torvalds1-16/+13
The poll() changes were not well thought out, and completely unexplained. They also caused a huge performance regression, because "->poll()" was no longer a trivial file operation that just called down to the underlying file operations, but instead did at least two indirect calls. Indirect calls are sadly slow now with the Spectre mitigation, but the performance problem could at least be largely mitigated by changing the "->get_poll_head()" operation to just have a per-file-descriptor pointer to the poll head instead. That gets rid of one of the new indirections. But that doesn't fix the new complexity that is completely unwarranted for the regular case. The (undocumented) reason for the poll() changes was some alleged AIO poll race fixing, but we don't make the common case slower and more complex for some uncommon special case, so this all really needs way more explanations and most likely a fundamental redesign. [ This revert is a revert of about 30 different commits, not reverted individually because that would just be unnecessarily messy - Linus ] Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2018-06-25ipmi: kcs_bmc: fix IRQ exception if the channel is not openHaiyue Wang1-21/+10
When kcs_bmc_handle_event calls kcs_force_abort function to handle the not open (no user running) KCS channel transaction, the returned status value -ENODEV causes the low level IRQ handler indicating that the irq was not for him by returning IRQ_NONE. After some time, this IRQ will be treated to be spurious one, and the exception dump happens. irq 30: nobody cared (try booting with the "irqpoll" option) CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.10.15-npcm750 #1 Hardware name: NPCMX50 Chip family [<c010b264>] (unwind_backtrace) from [<c0106930>] (show_stack+0x20/0x24) [<c0106930>] (show_stack) from [<c03dad38>] (dump_stack+0x8c/0xa0) [<c03dad38>] (dump_stack) from [<c0168810>] (__report_bad_irq+0x3c/0xdc) [<c0168810>] (__report_bad_irq) from [<c0168c34>] (note_interrupt+0x29c/0x2ec) [<c0168c34>] (note_interrupt) from [<c0165c80>] (handle_irq_event_percpu+0x5c/0x68) [<c0165c80>] (handle_irq_event_percpu) from [<c0165cd4>] (handle_irq_event+0x48/0x6c) [<c0165cd4>] (handle_irq_event) from [<c0169664>] (handle_fasteoi_irq+0xc8/0x198) [<c0169664>] (handle_fasteoi_irq) from [<c016529c>] (__handle_domain_irq+0x90/0xe8) [<c016529c>] (__handle_domain_irq) from [<c01014bc>] (gic_handle_irq+0x58/0x9c) [<c01014bc>] (gic_handle_irq) from [<c010752c>] (__irq_svc+0x6c/0x90) Exception stack(0xc0a01de8 to 0xc0a01e30) 1de0: 00002080 c0a6fbc0 00000000 00000000 00000000 c096d294 1e00: 00000000 00000001 dc406400 f03ff100 00000082 c0a01e94 c0a6fbc0 c0a01e38 1e20: 00200102 c01015bc 60000113 ffffffff [<c010752c>] (__irq_svc) from [<c01015bc>] (__do_softirq+0xbc/0x358) [<c01015bc>] (__do_softirq) from [<c011c798>] (irq_exit+0xb8/0xec) [<c011c798>] (irq_exit) from [<c01652a0>] (__handle_domain_irq+0x94/0xe8) [<c01652a0>] (__handle_domain_irq) from [<c01014bc>] (gic_handle_irq+0x58/0x9c) [<c01014bc>] (gic_handle_irq) from [<c010752c>] (__irq_svc+0x6c/0x90) Exception stack(0xc0a01ef8 to 0xc0a01f40) 1ee0: 00000000 000003ae 1f00: dcc0f338 c0111060 c0a00000 c0a0cc44 c0a0cbe4 c0a1c22b c07bc218 00000001 1f20: dcffca40 c0a01f54 c0a01f58 c0a01f48 c0103524 c0103528 60000013 ffffffff [<c010752c>] (__irq_svc) from [<c0103528>] (arch_cpu_idle+0x48/0x4c) [<c0103528>] (arch_cpu_idle) from [<c0681390>] (default_idle_call+0x30/0x3c) [<c0681390>] (default_idle_call) from [<c0156f24>] (do_idle+0xc8/0x134) [<c0156f24>] (do_idle) from [<c015722c>] (cpu_startup_entry+0x28/0x2c) [<c015722c>] (cpu_startup_entry) from [<c067ad74>] (rest_init+0x84/0x88) [<c067ad74>] (rest_init) from [<c0900d44>] (start_kernel+0x388/0x394) [<c0900d44>] (start_kernel) from [<0000807c>] (0x807c) handlers: [<c041c5dc>] npcm7xx_kcs_irq Disabling IRQ #30 It needs to change the returned status from -ENODEV to 0. The -ENODEV was originally used to tell the low level IRQ handler that no user was running, but not consider the IRQ handling desgin. And multiple KCS channels share one IRQ handler, it needs to check the IBF flag before doing force abort. If the IBF is set, after handling, return 0 to low level IRQ handler to indicate that the IRQ is handled. Signed-off-by: Haiyue Wang <haiyue.wang@linux.intel.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-06-25ipmi: Cleanup oops on initialization failureCorey Minyard1-2/+4
Commit 93c303d2045b3 "ipmi_si: Clean up shutdown a bit" didn't copy the behavior of the cleanup in one spot, it needed to check for a non-NULL interface before cleaning it up. Reported-by: Meelis Roos <mroos@linux.ee> Signed-off-by: Corey Minyard <cminyard@mvista.com> Tested-by: Meelis Roos <mroos@linux.ee>
2018-06-24Merge branch 'linus' of ↵Linus Torvalds1-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto fixes from Herbert Xu: - Fix use after free in chtls - Fix RBP breakage in sha3 - Fix use after free in hwrng_unregister - Fix overread in morus640 - Move sleep out of kernel_neon in arm64/aes-blk * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: hwrng: core - Always drop the RNG in hwrng_unregister() crypto: morus640 - Fix out-of-bounds access crypto: don't optimize keccakf() crypto: arm64/aes-blk - fix and move skcipher_walk_done out of kernel_neon_begin, _end crypto: chtls - use after free in chtls_pt_recvmsg()
2018-06-16docs: Fix some broken referencesMauro Carvalho Chehab1-1/+1
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by: Takashi Iwai <tiwai@suse.de> Acked-by: Masami Hiramatsu <mhiramat@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Coly Li <colyli@suse.de> Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by: Jonathan Corbet <corbet@lwn.net>
2018-06-15hwrng: core - Always drop the RNG in hwrng_unregister()Michael Büsch1-2/+9
enable_best_rng() is used in hwrng_unregister() to switch away from the currently active RNG, if that is the one currently being removed. However enable_best_rng() might fail, if the next RNG's init routine fails. In that case enable_best_rng() will return an error code and the currently active RNG will remain active. After unregistering this might lead to crashes due to use-after-free. Fix this by dropping the currently active RNG, if enable_best_rng() failed. This will result in no RNG to be active, if the next-best one failed to initialize. This problem was introduced by 142a27f0a731ddcf467546960a5585970ca98e21 Fixes: 142a27f0a731 ("hwrng: core - Reset user selected rng by...") Reported-by: Wirz <spam@lukas-wirz.de> Tested-by: Wirz <spam@lukas-wirz.de> Signed-off-by: Michael Büsch <m@bues.ch> Cc: stable@vger.kernel.org Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-06-13treewide: Use array_size() in vzalloc()Kees Cook1-1/+2
The vzalloc() function has no 2-factor argument form, so multiplication factors need to be wrapped in array_size(). This patch replaces cases of: vzalloc(a * b) with: vzalloc(array_size(a, b)) as well as handling cases of: vzalloc(a * b * c) with: vzalloc(array3_size(a, b, c)) This does, however, attempt to ignore constant size factors like: vzalloc(4 * 1024) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( vzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | vzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( vzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | vzalloc( - sizeof(u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | vzalloc( - sizeof(char) * COUNT + COUNT , ...) | vzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( vzalloc( - sizeof(TYPE) * (COUNT_ID) + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_ID + array_size(COUNT_ID, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT_CONST + array_size(COUNT_CONST, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT_ID) + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_ID + array_size(COUNT_ID, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT_CONST) + array_size(COUNT_CONST, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT_CONST + array_size(COUNT_CONST, sizeof(THING)) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ vzalloc( - SIZE * COUNT + array_size(COUNT, SIZE) , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( vzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | vzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( vzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | vzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( vzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | vzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( vzalloc(C1 * C2 * C3, ...) | vzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants. @@ expression E1, E2; constant C1, C2; @@ ( vzalloc(C1 * C2, ...) | vzalloc( - E1 * E2 + array_size(E1, E2) , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: devm_kzalloc() -> devm_kcalloc()Kees Cook1-1/+1
The devm_kzalloc() function has a 2-factor argument form, devm_kcalloc(). This patch replaces cases of: devm_kzalloc(handle, a * b, gfp) with: devm_kcalloc(handle, a * b, gfp) as well as handling cases of: devm_kzalloc(handle, a * b * c, gfp) with: devm_kzalloc(handle, array3_size(a, b, c), gfp) as it's slightly less ugly than: devm_kcalloc(handle, array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: devm_kzalloc(handle, 4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. Some manual whitespace fixes were needed in this patch, as Coccinelle really liked to write "=devm_kcalloc..." instead of "= devm_kcalloc...". The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ expression HANDLE; type TYPE; expression THING, E; @@ ( devm_kzalloc(HANDLE, - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | devm_kzalloc(HANDLE, - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression HANDLE; expression COUNT; typedef u8; typedef __u8; @@ ( devm_kzalloc(HANDLE, - sizeof(u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * (COUNT) + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(__u8) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(char) * COUNT + COUNT , ...) | devm_kzalloc(HANDLE, - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ expression HANDLE; type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ expression HANDLE; identifier SIZE, COUNT; @@ - devm_kzalloc + devm_kcalloc (HANDLE, - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression HANDLE; expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression HANDLE; expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | devm_kzalloc(HANDLE, - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ expression HANDLE; identifier STRIDE, SIZE, COUNT; @@ ( devm_kzalloc(HANDLE, - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | devm_kzalloc(HANDLE, - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression HANDLE; expression E1, E2, E3; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | devm_kzalloc(HANDLE, - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression HANDLE; expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( devm_kzalloc(HANDLE, sizeof(THING) * C2, ...) | devm_kzalloc(HANDLE, sizeof(TYPE) * C2, ...) | devm_kzalloc(HANDLE, C1 * C2 * C3, ...) | devm_kzalloc(HANDLE, C1 * C2, ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * E2 + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - (E1) * (E2) + E1, E2 , ...) | - devm_kzalloc + devm_kcalloc (HANDLE, - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kzalloc() -> kcalloc()Kees Cook4-4/+7
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13treewide: kmalloc() -> kmalloc_array()Kees Cook5-14/+22
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-13Convert virtio_console to struct_sizeMatthew Wilcox1-2/+1
Signed-off-by: Matthew Wilcox <mawilcox@microsoft.com> Signed-off-by: Kees Cook <keescook@chromium.org>
2018-06-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds3-0/+252
Pull sparc updates from David Miller: - a FPE signal fix that was also merged upstream - privileged ADI driver from Tom Hromatka * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc: fix compat siginfo ABI regression selftests: sparc64: char: Selftest for privileged ADI driver char: sparc64: Add privileged ADI driver
2018-06-08Merge branch 'next-tpm' of ↵Linus Torvalds17-269/+350
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security Pull TPM updates from James Morris: "From Jarkko: This purely a bug fix release. The only major change is to move the event log code to its own subdirectory because there starts to be so much of it" * 'next-tpm' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/linux-security: tpm: fix race condition in tpm_common_write() tpm: reduce polling time to usecs for even finer granularity tpm: replace kmalloc() + memcpy() with kmemdup() tpm: replace kmalloc() + memcpy() with kmemdup() tpm: fix use after free in tpm2_load_context() tpm: reduce poll sleep time in tpm_transmit() tpm_tis: verify locality released before returning from release_locality tpm: tpm_crb: relinquish locality on error path. tpm/st33zp24: Fix spelling mistake in macro ST33ZP24_TISREGISTER_UKNOWN tpm: Move eventlog declarations to its own header tpm: Move shared eventlog functions to common.c tpm: Move eventlog files to a subdirectory tpm: Add explicit endianness cast tpm: st33zp24: remove redundant null check on chip tpm: move the delay_msec increment after sleep in tpm_transmit()
2018-06-07Merge tag 'for-linus-4.18' of git://github.com/cminyard/linux-ipmiLinus Torvalds10-1765/+1547
Pull IPMI updates from Corey Minyard: "It's been a busy release for the IPMI driver. Some notable changes: - A user was running into timeout issues doing maintenance commands over the IPMB network behind an IPMI controller. Extend the maintenance mode concept to messages over IPMB and allow the timeouts to be tuned. - Lots of cleanup, style fixing, some bugfixes, and such. - At least one user was having trouble with the way the IPMI driver would lock the i2c driver module it used. The IPMI driver was not designed for hotplug. However, hotplug is a reality now, so the IPMI driver was modified to support hotplug. - The proc interface code is now completely removed. Long live sysfs!" * tag 'for-linus-4.18' of git://github.com/cminyard/linux-ipmi: (35 commits) ipmi: Properly release srcu locks on error conditions ipmi: NPCM7xx KCS BMC: enable interrupt to the host ipmi:bt: Set the timeout before doing a capabilities check ipmi: Remove the proc interface ipmi_ssif: Fix uninitialized variable issue ipmi: add an NPCM7xx KCS BMC driver ipmi_si: Clean up shutdown a bit ipmi_si: Rename intf_num to si_num ipmi: Remove smi->intf checks ipmi_ssif: Get rid of unused intf_num ipmi: Get rid of ipmi_user_t and ipmi_smi_t in include files ipmi: ipmi_unregister_smi() cannot fail, have it return void ipmi_devintf: Add an error return on invalid ioctls ipmi: Remove usecount function from interfaces ipmi_ssif: Remove usecount handling ipmi: Remove condition on interface shutdown ipmi_ssif: Convert over to a shutdown handler ipmi_si: Convert over to a shutdown handler ipmi: Rework locking and shutdown for hot remove ipmi: Fix some counter issues ...
2018-06-06Merge tag 'char-misc-4.18-rc1' of ↵Linus Torvalds1-9/+2
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver updates from Greg KH: "Here is the "big" char and misc driver patches for 4.18-rc1. It's not a lot of stuff here, but there are some highlights: - coreboot driver updates - soundwire driver updates - android binder updates - fpga big sync, mostly documentation - lots of minor driver updates All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (81 commits) vmw_balloon: fixing double free when batching mode is off MAINTAINERS: Add driver-api/fpga path fpga: clarify that unregister functions also free documentation: fpga: move fpga-region.txt to driver-api documentation: fpga: add bridge document to driver-api documentation: fpga: move fpga-mgr.txt to driver-api Documentation: fpga: move fpga overview to driver-api fpga: region: kernel-doc fixes fpga: bridge: kernel-doc fixes fpga: mgr: kernel-doc fixes fpga: use SPDX fpga: region: change api, add fpga_region_create/free fpga: bridge: change api, don't use drvdata fpga: manager: change api, don't use drvdata fpga: region: don't use drvdata in common fpga code Drivers: hv: vmbus: Removed an unnecessary cast from void * ver_linux: Drop redundant calls to system() to test if file is readable ver_linux: Move stderr redirection from function parameter to function body misc: IBM Virtual Management Channel Driver (VMC) rpmsg: Correct support for MODULE_DEVICE_TABLE() ...
2018-06-06Merge branch 'linus' of ↵Linus Torvalds4-4/+10
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Decryption test vectors are now automatically generated from encryption test vectors. Algorithms: - Fix unaligned access issues in crc32/crc32c. - Add zstd compression algorithm. - Add AEGIS. - Add MORUS. Drivers: - Add accelerated AEGIS/MORUS on x86. - Add accelerated SM4 on arm64. - Removed x86 assembly salsa implementation as it is slower than C. - Add authenc(hmac(sha*), cbc(aes)) support in inside-secure. - Add ctr(aes) support in crypto4xx. - Add hardware key support in ccree. - Add support for new Centaur CPU in via-rng" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (112 commits) crypto: chtls - free beyond end rspq_skb_cache crypto: chtls - kbuild warnings crypto: chtls - dereference null variable crypto: chtls - wait for memory sendmsg, sendpage crypto: chtls - key len correction crypto: salsa20 - Revert "crypto: salsa20 - export generic helpers" crypto: x86/salsa20 - remove x86 salsa20 implementations crypto: ccp - Add GET_ID SEV command crypto: ccp - Add DOWNLOAD_FIRMWARE SEV command crypto: qat - Add MODULE_FIRMWARE for all qat drivers crypto: ccree - silence debug prints crypto: ccree - better clock handling crypto: ccree - correct host regs offset crypto: chelsio - Remove separate buffer used for DMA map B0 block in CCM crypt: chelsio - Send IV as Immediate for cipher algo crypto: chelsio - Return -ENOSPC for transient busy indication. crypto: caam/qi - fix warning in init_cgr() crypto: caam - fix rfc4543 descriptors crypto: caam - fix MC firmware detection crypto: clarify licensing of OpenSSL asm code ...
2018-06-05char: sparc64: Add privileged ADI driverTom Hromatka3-0/+252
SPARC M7 and newer processors utilize ADI to version and protect memory. This driver is capable of reading/writing ADI/MCD versions from privileged user space processes. Addresses in the adi file are mapped linearly to physical memory at a ratio of 1:adi_blksz. Thus, a read (or write) of offset K in the file operates upon the ADI version at physical address K * adi_blksz. The version information is encoded as one version per byte. Intended consumers are makedumpfile and crash. Signed-off-by: Tom Hromatka <tom.hromatka@oracle.com> Reviewed-by: Khalid Aziz <khalid.aziz@oracle.com> Reviewed-by: Shannon Nelson <shannon.nelson@oracle.com> Reviewed-by: Anthony Yznaga <anthony.yznaga@oracle.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2018-06-04Merge branch 'work.aio-1' of ↵Linus Torvalds1-13/+16
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull aio updates from Al Viro: "Majority of AIO stuff this cycle. aio-fsync and aio-poll, mostly. The only thing I'm holding back for a day or so is Adam's aio ioprio - his last-minute fixup is trivial (missing stub in !CONFIG_BLOCK case), but let it sit in -next for decency sake..." * 'work.aio-1' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (46 commits) aio: sanitize the limit checking in io_submit(2) aio: fold do_io_submit() into callers aio: shift copyin of iocb into io_submit_one() aio_read_events_ring(): make a bit more readable aio: all callers of aio_{read,write,fsync,poll} treat 0 and -EIOCBQUEUED the same way aio: take list removal to (some) callers of aio_complete() aio: add missing break for the IOCB_CMD_FDSYNC case random: convert to ->poll_mask timerfd: convert to ->poll_mask eventfd: switch to ->poll_mask pipe: convert to ->poll_mask crypto: af_alg: convert to ->poll_mask net/rxrpc: convert to ->poll_mask net/iucv: convert to ->poll_mask net/phonet: convert to ->poll_mask net/nfc: convert to ->poll_mask net/caif: convert to ->poll_mask net/bluetooth: convert to ->poll_mask net/sctp: convert to ->poll_mask net/tipc: convert to ->poll_mask ...
2018-05-30tpm: fix race condition in tpm_common_write()Tadeusz Struk2-23/+19
There is a race condition in tpm_common_write function allowing two threads on the same /dev/tpm<N>, or two different applications on the same /dev/tpmrm<N> to overwrite each other commands/responses. Fixed this by taking the priv->buffer_mutex early in the function. Also converted the priv->data_pending from atomic to a regular size_t type. There is no need for it to be atomic since it is only touched under the protection of the priv->buffer_mutex. Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-26random: convert to ->poll_maskChristoph Hellwig1-13/+16
The big change is that random_read_wait and random_write_wait are merged into a single waitqueue that uses keyed wakeups. Because wait_event_* doesn't know about that this will lead to occassional spurious wakeups in _random_read and add_hwgenerator_randomness, but wait_event_* is designed to handle these and were are not in a a hot path there. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Theodore Ts'o <tytso@mit.edu> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2018-05-24ipmi: Properly release srcu locks on error conditionsCorey Minyard1-18/+25
When SRCU was added for handling hotplug, some error conditions were not handled properly. Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-05-23ipmi: NPCM7xx KCS BMC: enable interrupt to the hostAvi Fishman1-3/+14
Original kcs_bmc_npcm7xx.c was missing enabling to send interrupt to the host on writes to output buffer. This patch fixes it by setting the bits that enables the generation of IRQn events by hardware control based on the status of the OBF flag. Signed-off-by: Avi Fishman <AviFishman70@gmail.com> Reviewed-by: Haiyue Wang <haiyue.wang@linux.intel.com> Signed-off-by: Corey Minyard <cminyard@mvista.com>
2018-05-22ipmi:bt: Set the timeout before doing a capabilities checkCorey Minyard1-1/+2
There was one place where the timeout value for an operation was not being set, if a capabilities request was done from idle. Move the timeout value setting to before where that change might be requested. IMHO the cause here is the invisible returns in the macros. Maybe that's a job for later, though. Reported-by: Nordmark Claes <Claes.Nordmark@tieto.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Cc: stable@vger.kernel.org
2018-05-18hwrng: n2 - fix spelling mistake: "restesting" -> "retesting"Colin Ian King1-1/+1
Trivial fix to spelling mistake in dev_err error message Signed-off-by: Colin Ian King <colin.king@canonical.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-18tpm: reduce polling time to usecs for even finer granularityNayna Jain2-3/+6
The TPM burstcount and status commands are supposed to return very quickly [2][3]. This patch further reduces the TPM poll sleep time to usecs in get_burstcount() and wait_for_tpm_stat() by calling usleep_range() directly. After this change, performance on a system[1] with a TPM 1.2 with an 8 byte burstcount for 1000 extends improved from ~10.7 sec to ~7 sec. [1] All tests are performed on an x86 based, locked down, single purpose closed system. It has Infineon TPM 1.2 using LPC Bus. [2] From the TCG Specification "TCG PC Client Specific TPM Interface Specification (TIS), Family 1.2": "NOTE : It takes roughly 330 ns per byte transfer on LPC. 256 bytes would take 84 us, which is a long time to stall the CPU. Chipsets may not be designed to post this much data to LPC; therefore, the CPU itself is stalled for much of this time. Sending 1 kB would take 350 μs. Therefore, even if the TPM_STS_x.burstCount field is a high value, software SHOULD be interruptible during this period." [3] From the TCG Specification 2.0, "TCG PC Client Platform TPM Profile (PTP) Specification": "It takes roughly 330 ns per byte transfer on LPC. 256 bytes would take 84 us. Chipsets may not be designed to post this much data to LPC; therefore, the CPU itself is stalled for much of this time. Sending 1 kB would take 350 us. Therefore, even if the TPM_STS_x.burstCount field is a high value, software should be interruptible during this period. For SPI, assuming 20MHz clock and 64-byte transfers, it would take about 120 usec to move 256B of data. Sending 1kB would take about 500 usec. If the transactions are done using 4 bytes at a time, then it would take about 1 msec. to transfer 1kB of data." Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Reviewed-by: Mimi Zohar <zohar@linux.vnet.ibm.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Acked-by: Jay Freyensee <why2jjj.linux@gmail.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-16tty: replace ->proc_fops with ->proc_showChristoph Hellwig1-14/+1
Just set up the show callback in the tty_operations, and use proc_create_single_data to create the file without additional boilerplace code. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16proc: introduce proc_create_single{,_data}Christoph Hellwig6-86/+7
Variants of proc_create{,_data} that directly take a seq_file show callback and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-16proc: introduce proc_create_seq{,_data}Christoph Hellwig1-14/+1
Variants of proc_create{,_data} that directly take a struct seq_operations argument and drastically reduces the boilerplate code in the callers. All trivial callers converted over. Signed-off-by: Christoph Hellwig <hch@lst.de>
2018-05-14tpm: replace kmalloc() + memcpy() with kmemdup()Ji-Hun Kim1-2/+1
Use kmemdup rather than duplicating its implementation. Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com> Reviewed-by: James Morris <james.morris@microsoft.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkine@linux.intel.com>
2018-05-14tpm: replace kmalloc() + memcpy() with kmemdup()Ji-Hun Kim1-3/+1
Use kmemdup rather than duplicating its implementation. Signed-off-by: Ji-Hun Kim <ji_hun.kim@samsung.com> Reviewed-by: James Morris <james.morris@microsoft.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-14tpm: fix use after free in tpm2_load_context()Tadeusz Struk1-1/+2
If load context command returns with TPM2_RC_HANDLE or TPM2_RC_REFERENCE_H0 then we have use after free in line 114 and double free in 117. Fixes: 4d57856a21ed2 ("tpm2: add session handle context saving and restoring to the space code") Cc: stable@vger.kernel.org Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off--by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
2018-05-14tpm: reduce poll sleep time in tpm_transmit()Nayna Jain3-10/+5
tpm_try_transmit currently checks TPM status every 5 msecs between send and recv. It does so in a loop for the maximum timeout as defined in the TPM Interface Specification. However, the TPM may return before 5 msecs. Thus the polling interval for each iteration can be reduced, which improves overall performance. This patch changes the polling sleep time from 5 msecs to 1 msec. Additionally, this patch renames TPM_POLL_SLEEP to TPM_TIMEOUT_POLL and moves it to tpm.h as an enum value. After this change, performance on a system[1] with a TPM 1.2 with an 8 byte burstcount for 1000 extends improved from ~14 sec to ~10.7 sec. [1] All tests are performed on an x86 based, locked down, single purpose closed system. It has Infineon TPM 1.2 using LPC Bus. Signed-off-by: Nayna Jain <nayna@linux.vnet.ibm.com> Acked-by: Jay Freyensee <why2jjj.linux@gmail.com> Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Tested-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com> Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
generated by cgit v1.2.3 (git 2.39.0) at 2026-10-12 20:21:22 +0300