summaryrefslogtreecommitdiff
path: root/drivers/bus
AgeCommit message (Collapse)AuthorFilesLines
2021-08-04bus: fsl-mc: extend fsl_mc_get_endpoint() to pass interface IDIoana Ciornei1-1/+3
In case of a switch DPAA2 object, the interface ID is also needed when querying for the object endpoint. Extend fsl_mc_get_endpoint() so that users can also pass the interface ID that are interested in. Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-08-03Merge tag 'omap-for-v5.14/fixes-rc5-signed' of ↵Arnd Bergmann1-7/+15
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes Fixes for omaps for v5.14-rc series Some fixes for regressions and boot issues for various devices: - Fix gpt12 system timer regression on earlier beagleboard revisions - Fix potential NULL pointer access for omap_hwmod_get_pwrdm() - Disable RNG on secure am335x variants as it's not accessible - Fix flakey DCDC2 voltage causing hangs on am43x-epos-evm by reducing i2c0 bus speed for tps65218 - Fix typo for am437x-l4 can@0 node - Fix omap5 regression caused by vdds_1v8_main fixed-regulator * tag 'omap-for-v5.14/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: omap5-board-common: remove not physically existing vdds_1v8_main fixed-regulator ARM: dts: am437x-l4: fix typo in can@0 node ARM: dts: am43x-epos-evm: Reduce i2c0 bus speed for tps65218 bus: ti-sysc: AM3: RNG is GP only ARM: omap2+: hwmod: fix potential NULL pointer access bus: ti-sysc: Fix gpt12 system timer issue with reserved status Link: https://lore.kernel.org/r/pull-1627995895-406133@atomide.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2021-08-03net: really fix the build...David S. Miller2-4/+7
Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-31Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski2-14/+48
Conflicting commits, all resolutions pretty trivial: drivers/bus/mhi/pci_generic.c 5c2c85315948 ("bus: mhi: pci-generic: configurable network interface MRU") 56f6f4c4eb2a ("bus: mhi: pci_generic: Apply no-op for wake using sideband wake boolean") drivers/nfc/s3fwrn5/firmware.c a0302ff5906a ("nfc: s3fwrn5: remove unnecessary label") 46573e3ab08f ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") 801e541c79bb ("nfc: s3fwrn5: fix undefined parameter values in dev_err()") MAINTAINERS 7d901a1e878a ("net: phy: add Maxlinear GPY115/21x/24x driver") 8a7b46fa7902 ("MAINTAINERS: add Yasushi SHOJI as reviewer for the Microchip CAN BUS Analyzer Tool driver") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-07-27Merge branch 'omap-for-v5.14/ti-sysc' into omap-for-v5.15/ti-syscTony Lindgren1-12/+16
2021-07-27bus: ti-sysc: Add quirk for OMAP4 McASP to disable SIDLE modePeter Ujfalusi1-1/+2
The McASP module in OMAP4 does not work if the SIDLE mode is enabled, most like due to module integration issue that the signaling is not working correctly. Add a quirk for the module to select only NOIDLE mode when it is in use. Suggested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Peter Ujfalusi <peter.ujfalusi@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-07-27Merge branch 'fixes-v5.14' into fixesTony Lindgren12-52/+89
2021-07-27bus: ti-sysc: AM3: RNG is GP onlyKevin Hilman1-0/+2
Make the RNG on AM3 GP only. Based on this patch from TI v5.4 tree which is based on hwmod data which are now removed: | ARM: AM43xx: hwmod: Move RNG to a GP only links table | | On non-GP devices the RNG is controlled by the secure-side software, | like in DRA7xx hwmod we should not control this IP when we are not | a GP device. | | Signed-off-by: Andrew F. Davis <afd@ti.com> Cc: stable@vger.kernel.org # v5.10+ Signed-off-by: Kevin Hilman <khilman@baylibre.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-07-27Merge 5.14-rc3 into driver-core-nextGreg Kroah-Hartman2-14/+48
We need the driver-core fixes in here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-26Merge 5.14-rc3 into char-misc-nextGreg Kroah-Hartman2-14/+48
We need the char-misc fixes from 5.14-rc3 into here as well. Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: fsl-mc: fix mmio base address for child DPRCsLaurentiu Tudor1-2/+22
Some versions of the MC firmware wrongly report 0 for register base address of the DPMCP associated with child DPRC objects thus rendering them unusable. This is particularly troublesome in ACPI boot scenarios where the legacy way of extracting this base address from the device tree does not apply. Given that DPMCPs share the same base address, workaround this by using the base address extracted from the root DPRC container. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20210715140718.8513-8-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: fsl-mc: rescan devices if endpoint not foundLaurentiu Tudor1-2/+20
If the endpoint of a device is not yet probed on the bus, force a rescan of the devices and retry to get a reference to the endpoint device. If the device is still not found then we assume it's in a different isolation context (container/DPRC) thus unavailable and return a permission error. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Robert-Ionut Alexa <robert-ionut.alexa@nxp.com> Link: https://lore.kernel.org/r/20210715140718.8513-7-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: fsl-mc: pause the MC firmware when unloadingLaurentiu Tudor1-0/+10
Pause the MC firmware when unloading the driver so that it doesn't crash in certain scenarios, such as kexec. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20210715140718.8513-6-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: fsl-mc: pause the MC firmware before IOMMU setupLaurentiu Tudor1-1/+43
Add a bus notifier to pause the MC firmware as soon as its device gets discovered. This is needed as the firmware is live thus, as soon as the SMMU gets probed and enabled, it will crash the firmware due to SMMU context faults. The firmware will be resumed at probe time, after the required IOMMU setup was completed. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20210715140718.8513-5-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: fsl-mc: add .shutdown() op for the bus driverLaurentiu Tudor1-0/+6
The fsl-mc bus driver is missing the .shutdown() callback, so add it. The implementation simply calls the .remove() callback. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20210715140718.8513-4-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: fsl-mc: fully resume the firmwareLaurentiu Tudor1-1/+3
The MC firmware has two execution units. Resume them both, as on some Layerscape SoCs not doing so breaks the firmware. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20210715140718.8513-3-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: fsl-mc: handle DMA config deferral in ACPI caseLaurentiu Tudor1-11/+13
ACPI DMA configure API may return a defer status code, so handle it. On top of this, move the MC firmware resume after the DMA setup is completed to avoid crashing due to DMA setup not being done yet or being deferred. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20210715140718.8513-2-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: fsl-mc: fix arg in call to dprc_scan_objects()Laurentiu Tudor1-1/+1
Second parameter of dprc_scan_objects() is a bool not a pointer so change from NULL to false. Signed-off-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Link: https://lore.kernel.org/r/20210715140718.8513-1-laurentiu.tudor@nxp.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: mhi: pci_generic: Fix inbound IPCR channelLoic Poulain1-1/+17
The qrtr-mhi client driver assumes that inbound buffers are automatically allocated and queued by the MHI core, but this doesn't happen for mhi pci devices since IPCR inbound channel is not flagged with auto_queue, causing unusable IPCR (qrtr) feature. Fix that. Link: https://lore.kernel.org/r/1625736749-24947-1-git-send-email-loic.poulain@linaro.org [mani: fixed a spelling mistake in commit description] Fixes: 855a70c12021 ("bus: mhi: Add MHI PCI support for WWAN modems") Cc: stable@vger.kernel.org #5.10 Reviewed-by: Hemant kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <mani@kernel.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210716075106.49938-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: mhi: core: Validate channel ID when processing command completionsBhaumik Bhatt1-5/+12
MHI reads the channel ID from the event ring element sent by the device which can be any value between 0 and 255. In order to prevent any out of bound accesses, add a check against the maximum number of channels supported by the controller and those channels not configured yet so as to skip processing of that event ring element. Link: https://lore.kernel.org/r/1624558141-11045-1-git-send-email-bbhatt@codeaurora.org Fixes: 1d3173a3bae7 ("bus: mhi: core: Add support for processing events from client device") Cc: stable@vger.kernel.org #5.10 Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Jeffrey Hugo <quic_jhugo@quicinc.com> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210716075106.49938-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: mhi: pci_generic: Apply no-op for wake using sideband wake booleanBhaumik Bhatt1-8/+19
Devices such as SDX24 do not have the provision for inband wake doorbell in the form of channel 127 and instead have a sideband GPIO for it. Newer devices such as SDX55 or SDX65 support inband wake method by default. Ensure the functionality is used based on this such that device wake stays held when a client driver uses mhi_device_get() API or the equivalent debugfs entry. Link: https://lore.kernel.org/r/1624560809-30610-1-git-send-email-bbhatt@codeaurora.org Fixes: e3e5e6508fc1 ("bus: mhi: pci_generic: No-Op for device_wake operations") Cc: stable@vger.kernel.org #5.12 Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210716075106.49938-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-21bus: Make remove callback return voidUwe Kleine-König1-3/+1
The driver core ignores the return value of this callback because there is only little it can do when a device disappears. This is the final bit of a long lasting cleanup quest where several buses were converted to also return void from their remove callback. Additionally some resource leaks were fixed that were caused by drivers returning an error code in the expectation that the driver won't go away. With struct bus_type::remove returning void it's prevented that newly implemented buses return an ignored error code and so don't anticipate wrong expectations for driver authors. Reviewed-by: Tom Rix <trix@redhat.com> (For fpga) Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by: Cornelia Huck <cohuck@redhat.com> (For drivers/s390 and drivers/vfio) Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> (For ARM, Amba and related parts) Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Chen-Yu Tsai <wens@csie.org> (for sunxi-rsb) Acked-by: Pali Rohár <pali@kernel.org> Acked-by: Mauro Carvalho Chehab <mchehab@kernel.org> (for media) Acked-by: Hans de Goede <hdegoede@redhat.com> (For drivers/platform) Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com> Acked-By: Vinod Koul <vkoul@kernel.org> Acked-by: Juergen Gross <jgross@suse.com> (For xen) Acked-by: Lee Jones <lee.jones@linaro.org> (For mfd) Acked-by: Johannes Thumshirn <jth@kernel.org> (For mcb) Acked-by: Johan Hovold <johan@kernel.org> Acked-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> (For slimbus) Acked-by: Kirti Wankhede <kwankhede@nvidia.com> (For vfio) Acked-by: Maximilian Luz <luzmaximilian@gmail.com> Acked-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> (For ulpi and typec) Acked-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com> (For ipack) Acked-by: Geoff Levand <geoff@infradead.org> (For ps3) Acked-by: Yehezkel Bernat <YehezkelShB@gmail.com> (For thunderbolt) Acked-by: Alexander Shishkin <alexander.shishkin@linux.intel.com> (For intel_th) Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> (For pcmcia) Acked-by: Rafael J. Wysocki <rafael@kernel.org> (For ACPI) Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org> (rpmsg and apr) Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> (For intel-ish-hid) Acked-by: Dan Williams <dan.j.williams@intel.com> (For CXL, DAX, and NVDIMM) Acked-by: William Breathitt Gray <vilhelm.gray@gmail.com> (For isa) Acked-by: Stefan Richter <stefanr@s5r6.in-berlin.de> (For firewire) Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com> (For hid) Acked-by: Thorsten Scherer <t.scherer@eckelmann.de> (For siox) Acked-by: Sven Van Asbroeck <TheSven73@gmail.com> (For anybuss) Acked-by: Ulf Hansson <ulf.hansson@linaro.org> (For MMC) Acked-by: Wolfram Sang <wsa@kernel.org> # for I2C Acked-by: Sudeep Holla <sudeep.holla@arm.com> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Acked-by: Finn Thain <fthain@linux-m68k.org> Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> Link: https://lore.kernel.org/r/20210713193522.1770306-6-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-07-15bus: mhi: pci-generic: configurable network interface MRURichard Laing1-1/+5
The MRU value used by the MHI MBIM network interface affects the throughput performance of the interface. Different modem models use different default MRU sizes based on their bandwidth capabilities. Large values generally result in higher throughput for larger packet sizes. In addition if the MRU used by the MHI device is larger than that specified in the MHI net device the data is fragmented and needs to be re-assembled which generates a (single) warning message about the fragmented packets. Setting the MRU on both ends avoids the extra processing to re-assemble the packets. This patch allows the documented MRU for a modem to be automatically set as the MHI net device MRU avoiding fragmentation and improving throughput performance. Signed-off-by: Richard Laing <richard.laing@alliedtelesis.co.nz> Signed-off-by: David S. Miller <davem@davemloft.net>
2021-07-10Merge tag 'arm-drivers-5.14' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM driver updates from Olof Johansson: - Reset controllers: Adding support for Microchip Sparx5 Switch. - Memory controllers: ARM Primecell PL35x SMC memory controller driver cleanups and improvements. - i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN. - Rockchip: RK3568 power domains support + DT binding updates, cleanups. - Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details, including support for MSM8226, MDM9607, SM6125 and SC8180X. - ARM FFA driver: "Firmware Framework for ARMv8-A", defining management interfaces and communication (including bus model) between partitions both in Normal and Secure Worlds. - Tegra Memory controller changes, including major rework to deal with identity mappings at boot and integration with ARM SMMU pieces. * tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits) firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string firmware: turris-mox-rwtm: show message about HWRNG registration firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng firmware: turris-mox-rwtm: report failures better firmware: turris-mox-rwtm: fix reply status decoding function soc: imx: gpcv2: add support for i.MX8MN power domains dt-bindings: add defines for i.MX8MN power domains firmware: tegra: bpmp: Fix Tegra234-only builds iommu/arm-smmu: Use Tegra implementation on Tegra186 iommu/arm-smmu: tegra: Implement SID override programming iommu/arm-smmu: tegra: Detect number of instances at runtime dt-bindings: arm-smmu: Add Tegra186 compatible string firmware: qcom_scm: Add MDM9607 compatible soc: qcom: rpmpd: Add MDM9607 RPM Power Domains soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml memory: emif: remove unused frequency and voltage notifiers memory: fsl_ifc: fix leak of private memory on probe failure memory: fsl_ifc: fix leak of IO mapping on probe failure ...
2021-07-05Merge tag 'char-misc-5.14-rc1' of ↵Linus Torvalds9-46/+46
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char / misc driver updates from Greg KH: "Here is the big set of char / misc and other driver subsystem updates for 5.14-rc1. Included in here are: - habanalabs driver updates - fsl-mc driver updates - comedi driver updates - fpga driver updates - extcon driver updates - interconnect driver updates - mei driver updates - nvmem driver updates - phy driver updates - pnp driver updates - soundwire driver updates - lots of other tiny driver updates for char and misc drivers This is looking more and more like the "various driver subsystems mushed together" tree... All of these have been in linux-next for a while with no reported issues" * tag 'char-misc-5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (292 commits) mcb: Use DEFINE_RES_MEM() helper macro and fix the end address PNP: moved EXPORT_SYMBOL so that it immediately followed its function/variable bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' calls bus: mhi: Wait for M2 state during system resume bus: mhi: core: Fix power down latency intel_th: Wait until port is in reset before programming it intel_th: msu: Make contiguous buffers uncached intel_th: Remove an unused exit point from intel_th_remove() stm class: Spelling fix nitro_enclaves: Set Bus Master for the NE PCI device misc: ibmasm: Modify matricies to matrices misc: vmw_vmci: return the correct errno code siox: Simplify error handling via dev_err_probe() fpga: machxo2-spi: Address warning about unused variable lkdtm/heap: Add init_on_alloc tests selftests/lkdtm: Enable various testable CONFIGs lkdtm: Add CONFIG hints in errors where possible lkdtm: Enable DOUBLE_FAULT on all architectures lkdtm/heap: Add vmalloc linear overflow test lkdtm/bugs: XFAIL UNALIGNED_LOAD_STORE_WRITE ...
2021-07-01kernel.h: split out panic and oops helpersAndy Shevchenko1-0/+1
kernel.h is being used as a dump for all kinds of stuff for a long time. Here is the attempt to start cleaning it up by splitting out panic and oops helpers. There are several purposes of doing this: - dropping dependency in bug.h - dropping a loop by moving out panic_notifier.h - unload kernel.h from something which has its own domain At the same time convert users tree-wide to use new headers, although for the time being include new header back to kernel.h to avoid twisted indirected includes for existing users. [akpm@linux-foundation.org: thread_info.h needs limits.h] [andriy.shevchenko@linux.intel.com: ia64 fix] Link: https://lkml.kernel.org/r/20210520130557.55277-1-andriy.shevchenko@linux.intel.com Link: https://lkml.kernel.org/r/20210511074137.33666-1-andriy.shevchenko@linux.intel.com Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org> Co-developed-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Mike Rapoport <rppt@linux.ibm.com> Acked-by: Corey Minyard <cminyard@mvista.com> Acked-by: Christian Brauner <christian.brauner@ubuntu.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Kees Cook <keescook@chromium.org> Acked-by: Wei Liu <wei.liu@kernel.org> Acked-by: Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Sebastian Reichel <sre@kernel.org> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Acked-by: Stephen Boyd <sboyd@kernel.org> Acked-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Acked-by: Helge Deller <deller@gmx.de> # parisc Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-06-24bus: mhi: pci-generic: Add missing 'pci_disable_pcie_error_reporting()' callsChristophe JAILLET1-1/+4
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it must be undone by a corresponding 'pci_disable_pcie_error_reporting()' call Add the missing call in the error handling path of the probe and in the remove function. Cc: <stable@vger.kernel.org> Fixes: b012ee6bfe2a ("mhi: pci_generic: Add PCI error handlers") Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/f70c14701f4922d67e717633c91b6c481b59f298.1623445348.git.christophe.jaillet@wanadoo.fr Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210621161616.77524-6-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24bus: mhi: Wait for M2 state during system resumeBaochen Qiang1-0/+1
During system resume, MHI host triggers M3->M0 transition and then waits for target device to enter M0 state. Once done, the device queues a state change event into ctrl event ring and notifies MHI host by raising an interrupt, where a tasklet is scheduled to process this event. In most cases, the tasklet is served timely and wait operation succeeds. However, there are cases where CPU is busy and cannot serve this tasklet for some time. Once delay goes long enough, the device moves itself to M1 state and also interrupts MHI host after inserting a new state change event to ctrl ring. Later when CPU finally has time to process the ring, there will be two events: 1. For M3->M0 event, which is the first event to be processed queued first. The tasklet handler serves the event, updates device state to M0 and wakes up the task. 2. For M0->M1 event, which is processed later, the tasklet handler triggers M1->M2 transition and updates device state to M2 directly, then wakes up the MHI host (if it is still sleeping on this wait queue). Note that although MHI host has been woken up while processing the first event, it may still has no chance to run before the second event is processed. In other words, MHI host has to keep waiting till timeout causing the M0 state to be missed. kernel log here: ... Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.911251] mhi 0000:06:00.0: Entered with PM state: M3, MHI state: M3 Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917762] mhi 0000:06:00.0: State change event to state: M0 Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4247.917767] mhi 0000:06:00.0: State change event to state: M1 Apr 15 01:45:14 test-NUC8i7HVK kernel: [ 4338.788231] mhi 0000:06:00.0: Did not enter M0 state, MHI state: M2, PM state: M2 ... Fix this issue by simply adding M2 as a valid state for resume. Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-01720.1-QCAHSPSWPL_V1_V2_SILICONZ_LITE-1 Cc: stable@vger.kernel.org Fixes: 0c6b20a1d720 ("bus: mhi: core: Add support for MHI suspend and resume") Signed-off-by: Baochen Qiang <bqiang@codeaurora.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210524040312.14409-1-bqiang@codeaurora.org [mani: slightly massaged the commit message] Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210621161616.77524-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-24bus: mhi: core: Fix power down latencyLoic Poulain1-13/+5
On graceful power-down/disable transition, when an MHI reset is performed, the MHI device loses its context, including interrupt configuration. However, the current implementation is waiting for event(irq) driven state change to confirm reset has been completed, which never happens, and causes reset timeout, leading to unexpected high latency of the mhi_power_down procedure (up to 45 seconds). Fix that by moving to the recently introduced poll_reg_field method, waiting for the reset bit to be cleared, in the same way as the power_on procedure. Cc: stable@vger.kernel.org Fixes: a6e2e3522f29 ("bus: mhi: core: Add support for PM state transitions") Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Reviewed-by: Bhaumik Bhatt <bbhatt@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Hemant Kumar <hemantk@codeaurora.org> Link: https://lore.kernel.org/r/1620029090-8975-1-git-send-email-loic.poulain@linaro.org Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210621161616.77524-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17bus: fsl-mc: mc-io: Correct misdocumentation of 'dpmcp_dev' paramLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/bus/fsl-mc/mc-io.c:70: warning: Function parameter or member 'dpmcp_dev' not described in 'fsl_create_mc_io' Cc: Stuart Yoder <stuyoder@gmail.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210617110500.15907-8-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17bus: fsl-mc-msi: Fix a little doc-rot pertaining to 'np' to 'fwnode' conversionLee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/bus/fsl-mc/fsl-mc-msi.c:164: warning: Function parameter or member 'fwnode' not described in 'fsl_mc_msi_create_irq_domain' drivers/bus/fsl-mc/fsl-mc-msi.c:164: warning: Excess function parameter 'np' description in 'fsl_mc_msi_create_irq_domain' Cc: Stuart Yoder <stuyoder@gmail.com> Cc: German Rivera <German.Rivera@freescale.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210617110500.15907-7-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17bus: fsl-mc: fsl-mc-allocator: Fix misspelling of 'new_mc_adev' and demote ↵Lee Jones1-5/+5
non-kernel-doc headers Fixes the following W=1 kernel build warning(s): drivers/bus/fsl-mc/fsl-mc-allocator.c:271: warning: Function parameter or member 'new_mc_adev' not described in 'fsl_mc_object_allocate' drivers/bus/fsl-mc/fsl-mc-allocator.c:271: warning: Excess function parameter 'new_mc_dev' description in 'fsl_mc_object_allocate' drivers/bus/fsl-mc/fsl-mc-allocator.c:417: warning: Function parameter or member 'mc_bus_dev' not described in 'fsl_mc_cleanup_irq_pool' drivers/bus/fsl-mc/fsl-mc-allocator.c:417: warning: expecting prototype for Teardown the interrupt pool associated with an fsl(). Prototype was for fsl_mc_cleanup_irq_pool() instead drivers/bus/fsl-mc/fsl-mc-allocator.c:443: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocate_irqs' drivers/bus/fsl-mc/fsl-mc-allocator.c:443: warning: expecting prototype for Allocate the IRQs required by a given fsl(). Prototype was for fsl_mc_allocate_irqs() instead drivers/bus/fsl-mc/fsl-mc-allocator.c:586: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocator_probe' drivers/bus/fsl-mc/fsl-mc-allocator.c:618: warning: Function parameter or member 'mc_dev' not described in 'fsl_mc_allocator_remove' Cc: Stuart Yoder <stuyoder@gmail.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210617110500.15907-6-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17bus: fsl-mc: dprc-driver: Fix some missing/incorrect function parameter ↵Lee Jones1-3/+5
descriptions Fixes the following W=1 kernel build warning(s): drivers/bus/fsl-mc/dprc-driver.c:360: warning: Function parameter or member 'alloc_interrupts' not described in 'dprc_scan_container' drivers/bus/fsl-mc/dprc-driver.c:383: warning: Function parameter or member 'irq_num' not described in 'dprc_irq0_handler' drivers/bus/fsl-mc/dprc-driver.c:383: warning: Excess function parameter 'irq' description in 'dprc_irq0_handler' drivers/bus/fsl-mc/dprc-driver.c:394: warning: Function parameter or member 'irq_num' not described in 'dprc_irq0_handler_thread' drivers/bus/fsl-mc/dprc-driver.c:394: warning: Excess function parameter 'irq' description in 'dprc_irq0_handler_thread' Cc: Stuart Yoder <stuyoder@gmail.com> Cc: German Rivera <German.Rivera@freescale.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210617110500.15907-5-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17bus: fsl-mc: dprc: Fix a couple of misspelling and formatting issuesLee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/bus/fsl-mc/dprc.c:345: warning: Function parameter or member 'attr' not described in 'dprc_get_attributes' drivers/bus/fsl-mc/dprc.c:521: warning: Function parameter or member 'obj_type' not described in 'dprc_get_obj_region' Cc: Stuart Yoder <stuyoder@gmail.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210617110500.15907-4-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17bus: fsl-mc: fsl-mc-bus: Demote a bunch of non-conformant kernel-doc headers ↵Lee Jones1-9/+10
and help others Fixes the following W=1 kernel build warning(s): drivers/bus/fsl-mc/fsl-mc-bus.c:30: warning: expecting prototype for Default DMA mask for devices on a fsl(). Prototype was for FSL_MC_DEFAULT_DMA_MASK() instead drivers/bus/fsl-mc/fsl-mc-bus.c:45: warning: Function parameter or member 'fsl_mc_regs' not described in 'fsl_mc' drivers/bus/fsl-mc/fsl-mc-bus.c:124: warning: Function parameter or member 'dev' not described in 'fsl_mc_bus_uevent' drivers/bus/fsl-mc/fsl-mc-bus.c:124: warning: Function parameter or member 'env' not described in 'fsl_mc_bus_uevent' drivers/bus/fsl-mc/fsl-mc-bus.c:480: warning: Function parameter or member 'mc_driver' not described in '__fsl_mc_driver_register' drivers/bus/fsl-mc/fsl-mc-bus.c:480: warning: Function parameter or member 'owner' not described in '__fsl_mc_driver_register' drivers/bus/fsl-mc/fsl-mc-bus.c:511: warning: Function parameter or member 'mc_driver' not described in 'fsl_mc_driver_unregister' drivers/bus/fsl-mc/fsl-mc-bus.c:571: warning: Function parameter or member 'dev' not described in 'fsl_mc_get_root_dprc' drivers/bus/fsl-mc/fsl-mc-bus.c:571: warning: Function parameter or member 'root_dprc_dev' not described in 'fsl_mc_get_root_dprc' drivers/bus/fsl-mc/fsl-mc-bus.c:739: warning: Function parameter or member 'dev' not described in 'fsl_mc_is_root_dprc' drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'obj_desc' not described in 'fsl_mc_device_add' drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'mc_io' not described in 'fsl_mc_device_add' drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'parent_dev' not described in 'fsl_mc_device_add' drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: Function parameter or member 'new_mc_dev' not described in 'fsl_mc_device_add' drivers/bus/fsl-mc/fsl-mc-bus.c:767: warning: expecting prototype for Add a newly discovered fsl(). Prototype was for fsl_mc_device_add() instead drivers/bus/fsl-mc/fsl-mc-bus.c:1066: warning: Function parameter or member 'pdev' not described in 'fsl_mc_bus_probe' drivers/bus/fsl-mc/fsl-mc-bus.c:1190: warning: Function parameter or member 'pdev' not described in 'fsl_mc_bus_remove' Cc: Stuart Yoder <stuyoder@gmail.com> Cc: German Rivera <German.Rivera@freescale.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210617110500.15907-3-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17bus: fsl-mc: mc-sys: Supply missing function names in kernel-doc headersLee Jones1-9/+10
Fixes the following W=1 kernel build warning(s): drivers/bus/fsl-mc/mc-sys.c:20: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/bus/fsl-mc/mc-sys.c:151: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/bus/fsl-mc/mc-sys.c:197: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/bus/fsl-mc/mc-sys.c:237: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Stuart Yoder <stuyoder@gmail.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210617110500.15907-2-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-17bus: fsl-mc: mc-io: Supply function names for 'fsl_create_mc_io()' and ↵Lee Jones1-2/+2
'fsl_destroy_mc_io()' Fixes the following W=1 kernel build warning(s): drivers/bus/fsl-mc/mc-io.c:53: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst drivers/bus/fsl-mc/mc-io.c:126: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst Cc: Stuart Yoder <stuyoder@gmail.com> Reviewed-by: Laurentiu Tudor <laurentiu.tudor@nxp.com> Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210617110500.15907-1-lee.jones@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-12Merge tag 'char-misc-5.13-rc6' of ↵Linus Torvalds1-4/+38
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc Pull char/misc driver fixes from Greg KH: "Here are some small misc driver fixes for 5.13-rc6 that fix some reported problems: - Tiny phy driver fixes for reported issues - rtsx regression for when the device suspended - mhi driver fix for a use-after-free All of these have been in linux-next for a few days with no reported issues" * tag 'char-misc-5.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: misc: rtsx: separate aspm mode into MODE_REG and MODE_CFG bus: mhi: pci-generic: Fix hibernation bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove() bus: mhi: pci_generic: T99W175: update channel name from AT to DUN phy: Sparx5 Eth SerDes: check return value after calling platform_get_resource() phy: ralink: phy-mt7621-pci: drop 'of_match_ptr' to fix -Wunused-const-variable phy: ti: Fix an error code in wiz_probe() phy: phy-mtk-tphy: Fix some resource leaks in mtk_phy_init() phy: cadence: Sierra: Fix error return code in cdns_sierra_phy_probe() phy: usb: Fix misuse of IS_ENABLED
2021-06-11bus: ti-sysc: using pm_runtime_resume_and_get instead of pm_runtime_get_syncZhang Qilong1-4/+2
Using pm_runtime_resume_and_get is more appropriate for simplifing code. Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11bus: ti-sysc: Correct misdocumentation of 'sysc_ioremap()'Lee Jones1-1/+1
Fixes the following W=1 kernel build warning(s): drivers/bus/ti-sysc.c:867: warning: expecting prototype for syc_ioremap(). Prototype was for sysc_ioremap() instead Cc: Tony Lindgren <tony@atomide.com> Cc: Philipp Zabel <p.zabel@pengutronix.de> Cc: linux-omap@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-11bus: ti-sysc: Fix gpt12 system timer issue with reserved statusTony Lindgren1-7/+13
Jarkko Nikula <jarkko.nikula@bitmer.com> reported that Beagleboard revision c2 stopped booting. Jarkko bisected the issue down to commit 6cfcd5563b4f ("clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4"). Let's fix the issue by tagging system timers as reserved rather than ignoring them. And let's not probe any interconnect target module child devices for reserved modules. This allows PM runtime to keep track of clocks and clockdomains for the interconnect target module, and prevent the system timer from idling as we already have SYSC_QUIRK_NO_IDLE and SYSC_QUIRK_NO_IDLE_ON_INIT flags set for system timers. Fixes: 6cfcd5563b4f ("clocksource/drivers/timer-ti-dm: Fix suspend and resume for am3 and am4") Reported-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Tested-by: Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-06-09bus: mhi: pci-generic: Fix hibernationLoic Poulain1-1/+35
This patch fixes crash after resuming from hibernation. The issue occurs when mhi stack is builtin and so part of the 'restore-kernel', causing the device to be resumed from 'restored kernel' with a no more valid context (memory mappings etc...) and leading to spurious crashes. This patch fixes the issue by implementing proper freeze/restore callbacks. Link: https://lore.kernel.org/r/1622571445-4505-1-git-send-email-loic.poulain@linaro.org Reported-by: Shujun Wang <wsj20369@163.com> Cc: stable <stable@vger.kernel.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-4-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09bus: mhi: pci_generic: Fix possible use-after-free in mhi_pci_remove()Wei Yongjun1-1/+1
This driver's remove path calls del_timer(). However, that function does not wait until the timer handler finishes. This means that the timer handler may still be running after the driver's remove function has finished, which would result in a use-after-free. Fix by calling del_timer_sync(), which makes sure the timer handler has finished, and unable to re-schedule itself. Link: https://lore.kernel.org/r/20210413160318.2003699-1-weiyongjun1@huawei.com Fixes: 8562d4fe34a3 ("mhi: pci_generic: Add health-check") Cc: stable <stable@vger.kernel.org> Reported-by: Hulk Robot <hulkci@huawei.com> Reviewed-by: Hemant kumar <hemantk@codeaurora.org> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Reviewed-by: Loic Poulain <loic.poulain@linaro.org> Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-3-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-06-09bus: mhi: pci_generic: T99W175: update channel name from AT to DUNJarvis Jiang1-2/+2
According to MHI v1.1 specification, change the channel name of T99W175 from "AT" to "DUN" (Dial-up networking) for both channel 32 and 33, so that the channels can be bound to the Qcom WWAN control driver, and device node such as /dev/wwan0p3DUN will be generated, which is very useful for debugging modem Link: https://lore.kernel.org/r/20210429014226.21017-1-jarvis.w.jiang@gmail.com [mani: changed the dev node to /dev/wwan0p3DUN] Fixes: aac426562f56 ("bus: mhi: pci_generic: Introduce Foxconn T99W175 support") Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jarvis Jiang <jarvis.w.jiang@gmail.com> Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Link: https://lore.kernel.org/r/20210606153741.20725-2-manivannan.sadhasivam@linaro.org Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2021-05-27bus: qcom-ebi2: Fix incorrect documentation for '{slow,fast}_cfg'Lee Jones1-2/+2
Fixes the following W=1 kernel build warning(s): drivers/bus/qcom-ebi2.c:112: warning: Function parameter or member 'slow_cfg' not described in 'cs_data' drivers/bus/qcom-ebi2.c:112: warning: Function parameter or member 'fast_cfg' not described in 'cs_data' Reviewed-by: Linus Walleij <linus.walleij@linaro.org Cc: Andy Gross <agross@kernel.org> Cc: Bjorn Andersson <bjorn.andersson@linaro.org> Cc: Linus Walleij <linus.walleij@linaro.org> Cc: linux-arm-msm@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Link: https://lore.kernel.org/r/20210526081038.544942-8-lee.jones@linaro.org Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
2021-05-25bus: ti-sysc: Fix flakey idling of uarts and stop using swsup_sidle_actTony Lindgren1-2/+2
Looks like the swsup_sidle_act quirk handling is unreliable for serial ports. The serial ports just eventually stop idling until woken up and re-idled again. As the serial port not idling blocks any deeper SoC idle states, it's adds an annoying random flakeyness for power management. Let's just switch to swsup_sidle quirk instead like we already do for omap3 uarts. This means we manually idle the port instead of trying to use the hardware autoidle features when not in use. For more details on why the serial ports have been using swsup_idle_act, see commit 66dde54e978a ("ARM: OMAP2+: hwmod-data: UART IP needs software control to manage sidle modes"). It seems that the swsup_idle_act quirk handling is not enough though, and for example the TI Android kernel changed to using swsup_sidle with commit 77c34c84e1e0 ("OMAP4: HWMOD: UART1: disable smart-idle."). Fixes: b4a9a7a38917 ("bus: ti-sysc: Handle swsup idle mode quirks") Cc: Carl Philipp Klemm <philipp@uvos.xyz> Cc: Ivan Jelincic <parazyd@dyne.org> Cc: Merlijn Wajer <merlijn@wizzup.org> Cc: Pavel Machek <pavel@ucw.cz> Cc: Sebastian Reichel <sre@kernel.org> Cc: Sicelo A. Mhlongo <absicsz@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-18bus: ti-sysc: Fix am335x resume hang for usb otg moduleTony Lindgren1-3/+50
On am335x, suspend and resume only works once, and the system hangs if suspend is attempted again. However, turns out suspend and resume works fine multiple times if the USB OTG driver for musb controller is loaded. The issue is caused my the interconnect target module losing context during suspend, and it needs a restore on resume to be reconfigure again as debugged earlier by Dave Gerlach <d-gerlach@ti.com>. There are also other modules that need a restore on resume, like gpmc as noted by Dave. So let's add a common way to restore an interconnect target module based on a quirk flag. For now, let's enable the quirk for am335x otg only to fix the suspend and resume issue. As gpmc is not causing hangs based on tests with BeagleBone, let's patch gpmc separately. For gpmc, we also need a hardware reset done before restore according to Dave. To reinit the modules, we decouple system suspend from PM runtime. We replace calls to pm_runtime_force_suspend() and pm_runtime_force_resume() with direct calls to internal functions and rely on the driver internal state. There no point trying to handle complex system suspend and resume quirks via PM runtime. This is issue should have already been noticed with commit 1819ef2e2d12 ("bus: ti-sysc: Use swsup quirks also for am335x musb") when quirk handling was added for am335x otg for swsup. But the issue went unnoticed as having musb driver loaded hides the issue, and suspend and resume works once without the driver loaded. Fixes: 1819ef2e2d12 ("bus: ti-sysc: Use swsup quirks also for am335x musb") Suggested-by: Dave Gerlach <d-gerlach@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-05-18Merge branch 'fixes-rc1' into fixesTony Lindgren11-273/+763
2021-05-07bus: ti-sysc: Fix missing quirk flags for sataTony Lindgren1-1/+2
Naresh Kamboju <naresh.kamboju@linaro.org> reported that Beaglebone-X15 does not detect sata drives any longer after dra7 was flipped to boot with device tree data only. Turns out we are now missing the sata related quirk flags in ti-sysc that we used to have earlier. Fixes: 98feab31ac49 ("ARM: OMAP2+: Drop legacy platform data for dra7 sata") Fixes: 21206c8f2cb5 ("ARM: OMAP2+: Drop legacy platform data for omap5 sata") Link: https://lore.kernel.org/regressions/CA+G9fYtTN6ug3eBAW3wMcDeESUo+ebj7L5HBe5_fj4uqDExFQg@mail.gmail.com/ Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org> Tested-by: Naresh Kamboju <naresh.kamboju@linaro.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2021-04-26Merge tag 'arm-drivers-5.13' of ↵Linus Torvalds2-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc Pull ARM SoC driver updates from Arnd Bergmann: "Updates for SoC specific drivers include a few subsystems that have their own maintainers but send them through the soc tree: TEE/OP-TEE: - Add tracepoints around calls to secure world Memory controller drivers: - Minor fixes for Renesas, Exynos, Mediatek and Tegra platforms - Add debug statistics to Tegra20 memory controller - Update Tegra bindings and convert to dtschema ARM SCMI Firmware: - Support for modular SCMI protocols and vendor specific extensions - New SCMI IIO driver - Per-cpu DVFS The other driver changes are all from the platform maintainers directly and reflect the drivers that don't fit into any other subsystem as well as treewide changes for a particular platform. SoCFPGA: - Various cleanups contributed by Krzysztof Kozlowski Mediatek: - add MT8183 support to mutex driver - MMSYS: use per SoC array to describe the possible routing - add MMSYS support for MT8183 and MT8167 - add support for PMIC wrapper with integrated arbiter - add support for MT8192/MT6873 Tegra: - Bug fixes to PMC and clock drivers NXP/i.MX: - Update SCU power domain driver to keep console domain power on. - Add missing ADC1 power domain to SCU power domain driver. - Update comments for single global power domain in SCU power domain driver. - Add i.MX51/i.MX53 unique id support to i.MX SoC driver. NXP/FSL SoC driver updates for v5.13 - Add ACPI support for RCPM driver - Use generic io{read,write} for QE drivers after performance optimized for PowerPC - Fix QBMAN probe to cleanup HW states correctly for kexec - Various cleanup and style fix for QBMAN/QE/GUTS drivers OMAP: - Preparation to use devicetree for genpd - ti-sysc needs iorange check improved when the interconnect target module has no control registers listed - ti-sysc needs to probe l4_wkup and l4_cfg interconnects first to avoid issues with missing resources and unnecessary deferred probe - ti-sysc debug option can now detect more devices - ti-sysc now warns if an old incomplete devicetree data is found as we now rely on it being complete for am3 and 4 - soc init code needs to check for prcm and prm nodes for omap4/5 and dra7 - omap-prm driver needs to enable autoidle retention support for omap4 - omap5 clocks are missing gpmc and ocmc clock registers - pci-dra7xx now needs to use builtin_platform_driver instead of using builtin_platform_driver_probe for deferred probe to work Raspberry Pi: - Fix-up all RPi firmware drivers so as for unbind to happen in an orderly fashion - Support for RPi's PoE hat PWM bus Qualcomm - Improved detection for SCM calling conventions - Support for OEM specific wifi firmware path - Added drivers for SC7280/SM8350: RPMH, LLCC< AOSS QMP" * tag 'arm-drivers-5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (165 commits) soc: aspeed: fix a ternary sign expansion bug memory: mtk-smi: Add device-link between smi-larb and smi-common memory: samsung: exynos5422-dmc: handle clk_set_parent() failure memory: renesas-rpc-if: fix possible NULL pointer dereference of resource clk: socfpga: fix iomem pointer cast on 64-bit soc: aspeed: Adapt to new LPC device tree layout pinctrl: aspeed-g5: Adapt to new LPC device tree layout ipmi: kcs: aspeed: Adapt to new LPC DTS layout ARM: dts: Remove LPC BMC and Host partitions dt-bindings: aspeed-lpc: Remove LPC partitioning soc: fsl: enable acpi support in RCPM driver soc: qcom: mdt_loader: Detect truncated read of segments soc: qcom: mdt_loader: Validate that p_filesz < p_memsz soc: qcom: pdr: Fix error return code in pdr_register_listener firmware: qcom_scm: Fix kernel-doc function names to match firmware: qcom_scm: Suppress sysfs bind attributes firmware: qcom_scm: Workaround lack of "is available" call on SC7180 firmware: qcom_scm: Reduce locking section for __get_convention() firmware: qcom_scm: Make __qcom_scm_is_call_available() return bool Revert "soc: fsl: qe: introduce qe_io{read,write}* wrappers" ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-03-14 15:56:51 +0300