summaryrefslogtreecommitdiff
path: root/drivers/base
AgeCommit message (Collapse)AuthorFilesLines
2020-07-31PM: wakeup: Show statistics for deleted wakeup sources againzhuguangqing1-0/+3
commit e976eb4b91e906f20ec25b20c152d53c472fc3fd upstream. After commit 00ee22c28915 (PM / wakeup: Use seq_open() to show wakeup stats), print_wakeup_source_stats(m, &deleted_ws) is not called from wakeup_sources_stats_seq_show() any more. Because deleted_ws is one of the wakeup sources, it should be shown too, so add it to the end of all other wakeup sources. Signed-off-by: zhuguangqing <zhuguangqing@xiaomi.com> [ rjw: Subject & changelog ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Florian Fainelli <f.fainelli@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-31regmap: debugfs: check count when read regmap filePeng Fan1-0/+6
commit 74edd08a4fbf51d65fd8f4c7d8289cd0f392bd91 upstream. When executing the following command, we met kernel dump. dmesg -c > /dev/null; cd /sys; for i in `ls /sys/kernel/debug/regmap/* -d`; do echo "Checking regmap in $i"; cat $i/registers; done && grep -ri "0x02d0" *; It is because the count value is too big, and kmalloc fails. So add an upper bound check to allow max size `PAGE_SIZE << (MAX_ORDER - 1)`. Signed-off-by: Peng Fan <peng.fan@nxp.com> Link: https://lore.kernel.org/r/1584064687-12964-1-git-send-email-peng.fan@nxp.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-29regmap: dev_get_regmap_match(): fix string comparisonMarc Kleine-Budde1-1/+1
[ Upstream commit e84861fec32dee8a2e62bbaa52cded6b05a2a456 ] This function is used by dev_get_regmap() to retrieve a regmap for the specified device. If the device has more than one regmap, the name parameter can be used to specify one. The code here uses a pointer comparison to check for equal strings. This however will probably always fail, as the regmap->name is allocated via kstrdup_const() from the regmap's config->name. Fix this by using strcmp() instead. Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Link: https://lore.kernel.org/r/20200703103315.267996-1-mkl@pengutronix.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-22regmap: debugfs: Don't sleep while atomic for fast_io regmapsDouglas Anderson1-23/+29
[ Upstream commit 299632e54b2e692d2830af84be51172480dc1e26 ] If a regmap has "fast_io" set then its lock function uses a spinlock. That doesn't work so well with the functions: * regmap_cache_only_write_file() * regmap_cache_bypass_write_file() Both of the above functions have the pattern: 1. Lock the regmap. 2. Call: debugfs_write_file_bool() copy_from_user() __might_fault() __might_sleep() Let's reorder things a bit so that we do all of our sleepable functions before we grab the lock. Fixes: d3dc5430d68f ("regmap: debugfs: Allow writes to cache state settings") Signed-off-by: Douglas Anderson <dianders@chromium.org> Link: https://lore.kernel.org/r/20200715164611.1.I35b3533e8a80efde0cec1cc70f71e1e74b2fa0da@changeid Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16regmap: fix alignment issueJens Thoms Toerring1-54/+46
[ Upstream commit 53d860952c8215cf9ae1ea33409c8cb71ad6ad3d ] The assembly and disassembly of data to be sent to or received from a device invoke functions regmap_format_XX() and regmap_parse_XX() that extract or insert data items from or into a buffer, using assignments. In some cases the functions are called with a buffer pointer with an odd address. On architectures with strict alignment requirements this can result in a kernel crash. The assignments have been replaced by functions that take alignment into account. Signed-off-by: Jens Thoms Toerring <jt@toerring.de> Link: https://lore.kernel.org/r/20200531095300.GA27570@toerring.de Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30regmap: Fix memory leak from regmap_register_patchCharles Keepax1-0/+1
[ Upstream commit 95b2c3ec4cb1689db2389c251d39f64490ba641c ] When a register patch is registered the reg_sequence is copied but the memory allocated is never freed. Add a kfree in regmap_exit to clean it up. Fixes: 22f0d90a3482 ("regmap: Support register patch sets") Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20200617152129.19655-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24drivers: base: Fix NULL pointer exception in __platform_driver_probe() if a ↵Kuppuswamy Sathyanarayanan1-0/+2
driver developer is foolish [ Upstream commit 388bcc6ecc609fca1b4920de7dc3806c98ec535e ] If platform bus driver registration is failed then, accessing platform bus spin lock (&drv->driver.bus->p->klist_drivers.k_lock) in __platform_driver_probe() without verifying the return value __platform_driver_register() can lead to NULL pointer exception. So check the return value before attempting the spin lock. One such example is below: For a custom usecase, I have intentionally failed the platform bus registration and I expected all the platform device/driver registrations to fail gracefully. But I came across this panic issue. [ 1.331067] BUG: kernel NULL pointer dereference, address: 00000000000000c8 [ 1.331118] #PF: supervisor write access in kernel mode [ 1.331163] #PF: error_code(0x0002) - not-present page [ 1.331208] PGD 0 P4D 0 [ 1.331233] Oops: 0002 [#1] PREEMPT SMP [ 1.331268] CPU: 3 PID: 1 Comm: swapper/0 Tainted: G W 5.6.0-00049-g670d35fb0144 #165 [ 1.331341] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015 [ 1.331406] RIP: 0010:_raw_spin_lock+0x15/0x30 [ 1.331588] RSP: 0000:ffffc9000001be70 EFLAGS: 00010246 [ 1.331632] RAX: 0000000000000000 RBX: 00000000000000c8 RCX: 0000000000000001 [ 1.331696] RDX: 0000000000000001 RSI: 0000000000000092 RDI: 0000000000000000 [ 1.331754] RBP: 00000000ffffffed R08: 0000000000000501 R09: 0000000000000001 [ 1.331817] R10: ffff88817abcc520 R11: 0000000000000670 R12: 00000000ffffffed [ 1.331881] R13: ffffffff82dbc268 R14: ffffffff832f070a R15: 0000000000000000 [ 1.331945] FS: 0000000000000000(0000) GS:ffff88817bd80000(0000) knlGS:0000000000000000 [ 1.332008] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1.332062] CR2: 00000000000000c8 CR3: 000000000681e001 CR4: 00000000003606e0 [ 1.332126] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1.332189] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1.332252] Call Trace: [ 1.332281] __platform_driver_probe+0x92/0xee [ 1.332323] ? rtc_dev_init+0x2b/0x2b [ 1.332358] cmos_init+0x37/0x67 [ 1.332396] do_one_initcall+0x7d/0x168 [ 1.332428] kernel_init_freeable+0x16c/0x1c9 [ 1.332473] ? rest_init+0xc0/0xc0 [ 1.332508] kernel_init+0x5/0x100 [ 1.332543] ret_from_fork+0x1f/0x30 [ 1.332579] CR2: 00000000000000c8 [ 1.332616] ---[ end trace 3bd87f12e9010b87 ]--- [ 1.333549] note: swapper/0[1] exited with preempt_count 1 [ 1.333592] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000009 [ 1.333736] Kernel Offset: disabled Note, this can only be triggered if a driver errors out from this call, which should never happen. If it does, the driver needs to be fixed. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: https://lore.kernel.org/r/20200408214003.3356-1-sathyanarayanan.kuppuswamy@linux.intel.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-10x86/speculation: Add Special Register Buffer Data Sampling (SRBDS) mitigationMark Gross1-0/+8
commit 7e5b3c267d256822407a22fdce6afdf9cd13f9fb upstream SRBDS is an MDS-like speculative side channel that can leak bits from the random number generator (RNG) across cores and threads. New microcode serializes the processor access during the execution of RDRAND and RDSEED. This ensures that the shared buffer is overwritten before it is released for reuse. While it is present on all affected CPU models, the microcode mitigation is not needed on models that enumerate ARCH_CAPABILITIES[MDS_NO] in the cases where TSX is not supported or has been disabled with TSX_CTRL. The mitigation is activated by default on affected processors and it increases latency for RDRAND and RDSEED instructions. Among other effects this will reduce throughput from /dev/urandom. * Enable administrator to configure the mitigation off when desired using either mitigations=off or srbds=off. * Export vulnerability status via sysfs * Rename file-scoped macros to apply for non-whitelist table initializations. [ bp: Massage, - s/VULNBL_INTEL_STEPPING/VULNBL_INTEL_STEPPINGS/g, - do not read arch cap MSR a second time in tsx_fused_off() - just pass it in, - flip check in cpu_set_bug_bits() to save an indentation level, - reflow comments. jpoimboe: s/Mitigated/Mitigation/ in user-visible strings tglx: Dropped the fused off magic for now ] Signed-off-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-27component: Silence bind error on -EPROBE_DEFERJames Hilliard1-3/+5
[ Upstream commit 7706b0a76a9697021e2bf395f3f065c18f51043d ] If a component fails to bind due to -EPROBE_DEFER we should not log an error as this is not a real failure. Fixes messages like: vc4-drm soc:gpu: failed to bind 3f902000.hdmi (ops vc4_hdmi_ops): -517 vc4-drm soc:gpu: master bind failed: -517 Signed-off-by: James Hilliard <james.hilliard1@gmail.com> Link: https://lore.kernel.org/r/20200411190241.89404-1-james.hilliard1@gmail.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-10Revert "software node: Simplify software_node_release() function"Brendan Higgins1-7/+7
commit 7589238a8cf37331607c3222a64ac3140b29532d upstream. This reverts commit 3df85a1ae51f6b256982fe9d17c2dc5bfb4cc402. The reverted commit says "It's possible to release the node ID immediately when fwnode_remove_software_node() is called, no need to wait for software_node_release() with that." However, releasing the node ID before waiting for software_node_release() to be called causes the node ID to be released before the kobject and the underlying sysfs entry; this means there is a period of time where a sysfs entry exists that is associated with an unallocated node ID. Once consequence of this is that there is a race condition where it is possible to call fwnode_create_software_node() with no parent node specified (NULL) and have it fail with -EEXIST because the node ID that was assigned is still associated with a stale sysfs entry that hasn't been cleaned up yet. Although it is difficult to reproduce this race condition under normal conditions, it can be deterministically reproduced with the following minconfig on UML: CONFIG_KUNIT_DRIVER_PE_TEST=y CONFIG_DEBUG_KERNEL=y CONFIG_DEBUG_OBJECTS=y CONFIG_DEBUG_OBJECTS_TIMERS=y CONFIG_DEBUG_KOBJECT_RELEASE=y CONFIG_KUNIT=y Running the tests with this configuration causes the following failure: <snip> kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 400) ok 1 - pe_test_uints sysfs: cannot create duplicate filename '/kernel/software_nodes/node0' CPU: 0 PID: 28 Comm: kunit_try_catch Not tainted 5.6.0-rc3-next-20200227 #14 <snip> kobject_add_internal failed for node0 with -EEXIST, don't try to register things with the same name in the same directory. kobject: 'node0' ((____ptrval____)): kobject_release, parent (____ptrval____) (delayed 100) # pe_test_uint_arrays: ASSERTION FAILED at drivers/base/test/property-entry-test.c:123 Expected node is not error, but is: -17 not ok 2 - pe_test_uint_arrays <snip> Reported-by: Heidi Fahim <heidifahim@google.com> Signed-off-by: Brendan Higgins <brendanhiggins@google.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Cc: 5.3+ <stable@vger.kernel.org> # 5.3+ Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-05-02PM: sleep: core: Switch back to async_schedule_dev()Kai-Heng Feng1-1/+1
commit 09beebd8f93b3c8bf894e342f0a203a5c612478c upstream. Commit 8b9ec6b73277 ("PM core: Use new async_schedule_dev command") introduced a new function for better performance. However commit f2a424f6c613 ("PM / core: Introduce dpm_async_fn() helper") went back to the non-optimized version, async_schedule(). So switch back to the sync_schedule_dev() to improve performance Fixes: f2a424f6c613 ("PM / core: Introduce dpm_async_fn() helper") Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17PM: sleep: wakeup: Skip wakeup_source_sysfs_remove() if device is not thereNeeraj Upadhyay1-1/+3
commit 87de6594dc45dbf6819f3e0ef92f9331c5a9444c upstream. Skip wakeup_source_sysfs_remove() to fix a NULL pinter dereference via ws->dev, if the wakeup source is unregistered before registering the wakeup class from device_add(). Fixes: 2ca3d1ecb8c4 ("PM / wakeup: Register wakeup class kobj after device is added") Signed-off-by: Neeraj Upadhyay <neeraju@codeaurora.org> Cc: 5.4+ <stable@vger.kernel.org> # 5.4+ [ rjw: Subject & changelog, white space ] Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17PM / Domains: Allow no domain-idle-states DT property in genpd when parsingUlf Hansson1-1/+1
commit 56cb26891ea4180121265dc6b596015772c4a4b8 upstream. Commit 2c361684803e ("PM / Domains: Don't treat zero found compatible idle states as an error"), moved of_genpd_parse_idle_states() towards allowing none compatible idle state to be found for the device node, rather than returning an error code. However, it didn't consider that the "domain-idle-states" DT property may be missing as it's optional, which makes of_count_phandle_with_args() to return -ENOENT. Let's fix this to make the behaviour consistent. Fixes: 2c361684803e ("PM / Domains: Don't treat zero found compatible idle states as an error") Reported-by: Benjamin Gaignard <benjamin.gaignard@st.com> Cc: 4.20+ <stable@vger.kernel.org> # 4.20+ Reviewed-by: Sudeep Holla <sudeep.holla@arm.com> Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-04-17firmware: fix a double abort case with fw_load_sysfs_fallbackJunyong Sun1-1/+1
[ Upstream commit bcfbd3523f3c6eea51a74d217a8ebc5463bcb7f4 ] fw_sysfs_wait_timeout may return err with -ENOENT at fw_load_sysfs_fallback and firmware is already in abort status, no need to abort again, so skip it. This issue is caused by concurrent situation like below: when thread 1# wait firmware loading, thread 2# may write -1 to abort loading and wakeup thread 1# before it timeout. so wait_for_completion_killable_timeout of thread 1# would return remaining time which is != 0 with fw_st->status FW_STATUS_ABORTED.And the results would be converted into err -ENOENT in __fw_state_wait_common and transfered to fw_load_sysfs_fallback in thread 1#. The -ENOENT means firmware status is already at ABORTED, so fw_load_sysfs_fallback no need to get mutex to abort again. ----------------------------- thread 1#,wait for loading fw_load_sysfs_fallback ->fw_sysfs_wait_timeout ->__fw_state_wait_common ->wait_for_completion_killable_timeout in __fw_state_wait_common, ... 93 ret = wait_for_completion_killable_timeout(&fw_st->completion, timeout); 94 if (ret != 0 && fw_st->status == FW_STATUS_ABORTED) 95 return -ENOENT; 96 if (!ret) 97 return -ETIMEDOUT; 98 99 return ret < 0 ? ret : 0; ----------------------------- thread 2#, write -1 to abort loading firmware_loading_store ->fw_load_abort ->__fw_load_abort ->fw_state_aborted ->__fw_state_set ->complete_all in __fw_state_set, ... 111 if (status == FW_STATUS_DONE || status == FW_STATUS_ABORTED) 112 complete_all(&fw_st->completion); ------------------------------------------- BTW,the double abort issue would not cause kernel panic or create an issue, but slow down it sometimes.The change is just a minor optimization. Signed-off-by: Junyong Sun <sunjunyong@xiaomi.com> Acked-by: Luis Chamberlain <mcgrof@kernel.org> Link: https://lore.kernel.org/r/1583202968-28792-1-git-send-email-sunjunyong@xiaomi.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-04-01drivers/base/memory.c: indicate all memory blocks as removableDavid Hildenbrand1-20/+3
commit 53cdc1cb29e87ce5a61de5bb393eb08925d14ede upstream. We see multiple issues with the implementation/interface to compute whether a memory block can be offlined (exposed via /sys/devices/system/memory/memoryX/removable) and would like to simplify it (remove the implementation). 1. It runs basically lockless. While this might be good for performance, we see possible races with memory offlining that will require at least some sort of locking to fix. 2. Nowadays, more false positives are possible. No arch-specific checks are performed that validate if memory offlining will not be denied right away (and such check will require locking). For example, arm64 won't allow to offline any memory block that was added during boot - which will imply a very high error rate. Other archs have other constraints. 3. The interface is inherently racy. E.g., if a memory block is detected to be removable (and was not a false positive at that time), there is still no guarantee that offlining will actually succeed. So any caller already has to deal with false positives. 4. It is unclear which performance benefit this interface actually provides. The introducing commit 5c755e9fd813 ("memory-hotplug: add sysfs removable attribute for hotplug memory remove") mentioned "A user-level agent must be able to identify which sections of memory are likely to be removable before attempting the potentially expensive operation." However, no actual performance comparison was included. Known users: - lsmem: Will group memory blocks based on the "removable" property. [1] - chmem: Indirect user. It has a RANGE mode where one can specify removable ranges identified via lsmem to be offlined. However, it also has a "SIZE" mode, which allows a sysadmin to skip the manual "identify removable blocks" step. [2] - powerpc-utils: Uses the "removable" attribute to skip some memory blocks right away when trying to find some to offline+remove. However, with ballooning enabled, it already skips this information completely (because it once resulted in many false negatives). Therefore, the implementation can deal with false positives properly already. [3] According to Nathan Fontenot, DLPAR on powerpc is nowadays no longer driven from userspace via the drmgr command (powerpc-utils). Nowadays it's managed in the kernel - including onlining/offlining of memory blocks - triggered by drmgr writing to /sys/kernel/dlpar. So the affected legacy userspace handling is only active on old kernels. Only very old versions of drmgr on a new kernel (unlikely) might execute slower - totally acceptable. With CONFIG_MEMORY_HOTREMOVE, always indicating "removable" should not break any user space tool. We implement a very bad heuristic now. Without CONFIG_MEMORY_HOTREMOVE we cannot offline anything, so report "not removable" as before. Original discussion can be found in [4] ("[PATCH RFC v1] mm: is_mem_section_removable() overhaul"). Other users of is_mem_section_removable() will be removed next, so that we can remove is_mem_section_removable() completely. [1] http://man7.org/linux/man-pages/man1/lsmem.1.html [2] http://man7.org/linux/man-pages/man8/chmem.8.html [3] https://github.com/ibm-power-utilities/powerpc-utils [4] https://lkml.kernel.org/r/20200117105759.27905-1-david@redhat.com Also, this patch probably fixes a crash reported by Steve. http://lkml.kernel.org/r/CAPcyv4jpdaNvJ67SkjyUJLBnBnXXQv686BiVW042g03FUmWLXw@mail.gmail.com Reported-by: "Scargall, Steve" <steve.scargall@intel.com> Suggested-by: Michal Hocko <mhocko@kernel.org> Signed-off-by: David Hildenbrand <david@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Nathan Fontenot <ndfont@gmail.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Badari Pulavarty <pbadari@us.ibm.com> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Karel Zak <kzak@redhat.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/20200128093542.6908-1-david@redhat.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-03-18driver code: clarify and fix platform device DMA mask allocationChristoph Hellwig1-19/+6
commit e3a36eb6dfaeea8175c05d5915dcf0b939be6dab upstream. This does three inter-related things to clarify the usage of the platform device dma_mask field. In the process, fix the bug introduced by cdfee5623290 ("driver core: initialize a default DMA mask for platform device") that caused Artem Tashkinov's laptop to not boot with newer Fedora kernels. This does: - First off, rename the field to "platform_dma_mask" to make it greppable. We have way too many different random fields called "dma_mask" in various data structures, where some of them are actual masks, and some of them are just pointers to the mask. And the structures all have pointers to each other, or embed each other inside themselves, and "pdev" sometimes means "platform device" and sometimes it means "PCI device". So to make it clear in the code when you actually use this new field, give it a unique name (it really should be something even more unique like "platform_device_dma_mask", since it's per platform device, not per platform, but that gets old really fast, and this is unique enough in context). To further clarify when the field gets used, initialize it when we actually start using it with the default value. - Then, use this field instead of the random one-off allocation in platform_device_register_full() that is now unnecessary since we now already have a perfectly fine allocation for it in the platform device structure. - The above then allows us to fix the actual bug, where the error path of platform_device_register_full() would unconditionally free the platform device DMA allocation with 'kfree()'. That kfree() was dont regardless of whether the allocation had been done earlier with the (now removed) kmalloc, or whether setup_pdev_dma_masks() had already been used and the dma_mask pointer pointed to the mask that was part of the platform device. It seems most people never triggered the error path, or only triggered it from a call chain that set an explicit pdevinfo->dma_mask value (and thus caused the unnecessary allocation that was "cleaned up" in the error path) before calling platform_device_register_full(). Robin Murphy points out that in Artem's case the wdat_wdt driver failed in platform_device_add(), and that was the one that had called platform_device_register_full() with pdevinfo.dma_mask = 0, and would have caused that kfree() of pdev.dma_mask corrupting the heap. A later unrelated kmalloc() then oopsed due to the heap corruption. Fixes: cdfee5623290 ("driver core: initialize a default DMA mask for platform device") Reported-bisected-and-tested-by: Artem S. Tashkinov <aros@gmx.com> Reviewed-by: Robin Murphy <robin.murphy@arm.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-24driver core: platform: fix u32 greater or equal to zero comparisonColin Ian King1-1/+1
[ Upstream commit 0707cfa5c3ef58effb143db9db6d6e20503f9dec ] Currently the check that a u32 variable i is >= 0 is always true because the unsigned variable will never be negative, causing the loop to run forever. Fix this by changing the pre-decrement check to a zero check on i followed by a decrement of i. Addresses-Coverity: ("Unsigned compared against 0") Fixes: 39cc539f90d0 ("driver core: platform: Prevent resouce overflow from causing infinite loops") Signed-off-by: Colin Ian King <colin.king@canonical.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20200116175758.88396-1-colin.king@canonical.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24driver core: Print device when resources present in really_probe()Geert Uytterhoeven1-1/+4
[ Upstream commit 7c35e699c88bd60734277b26962783c60e04b494 ] If a device already has devres items attached before probing, a warning backtrace is printed. However, this backtrace does not reveal the offending device, leaving the user uninformed. Furthermore, using WARN_ON() causes systems with panic-on-warn to reboot. Fix this by replacing the WARN_ON() by a dev_crit() message. Abort probing the device, to prevent doing more damage to the device's resources. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/r/20191206132219.28908-1-geert+renesas@glider.be Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-24driver core: platform: Prevent resouce overflow from causing infinite loopsSimon Schwartz1-4/+6
[ Upstream commit 39cc539f90d035a293240c9443af50be55ee81b8 ] num_resources in the platform_device struct is declared as a u32. The for loops that iterate over num_resources use an int as the counter, which can cause infinite loops on architectures with smaller ints. Change the loop counters to u32. Signed-off-by: Simon Schwartz <kern.simon@theschwartz.xyz> Link: https://lore.kernel.org/r/2201ce63a2a171ffd2ed14e867875316efcf71db.camel@theschwartz.xyz Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-02-15regmap: fix writes to non incrementing registersBen Whitten1-5/+12
commit 2e31aab08bad0d4ee3d3d890a7b74cb6293e0a41 upstream. When checking if a register block is writable we must ensure that the block does not start with or contain a non incrementing register. Fixes: 8b9f9d4dc511 ("regmap: verify if register is writeable before writing operations") Signed-off-by: Ben Whitten <ben.whitten@gmail.com> Link: https://lore.kernel.org/r/20200118205625.14532-1-ben.whitten@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-11PM: core: Fix handling of devices deleted during system-wide resumeRafael J. Wysocki1-5/+37
commit 0552e05fdfea191a2cf3a0abd33574b5ef9ca818 upstream. If a device is deleted by one of its system-wide resume callbacks (for example, because it does not appear to be present or accessible any more) along with its children, the resume of the children may continue leading to use-after-free errors and other issues (potentially). Namely, if the device's children are resumed asynchronously, their resume may have been scheduled already before the device's callback runs and so the device may be deleted while dpm_wait_for_superior() is being executed for them. The memory taken up by the parent device object may be freed then while dpm_wait() is waiting for the parent's resume callback to complete, which leads to a use-after-free. Moreover, the resume of the children is really not expected to continue after they have been unregistered, so it must be terminated right away in that case. To address this problem, modify dpm_wait_for_superior() to check if the target device is still there in the system-wide PM list of devices and if so, to increment its parent's reference counter, both under dpm_list_mtx which prevents device_del() running for the child from dropping the parent's reference counter prematurely. If the device is not present in the system-wide PM list of devices any more, the resume of it cannot continue, so check that again after dpm_wait() returns, which means that the parent's callback has been completed, and pass the result of that check to the caller of dpm_wait_for_superior() to allow it to abort the device's resume if it is not there any more. Link: https://lore.kernel.org/linux-pm/1579568452-27253-1-git-send-email-chanho.min@lge.com Reported-by: Chanho Min <chanho.min@lge.com> Cc: All applicable <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-01driver core: Fix test_async_driver_probe if NUMA is disabledGuenter Roeck1-1/+2
commit 264d25275a46fce5da501874fa48a2ae5ec571c8 upstream. Since commit 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity"), running the test with NUMA disabled results in warning messages similar to the following. test_async_driver test_async_driver.12: NUMA node mismatch -1 != 0 If CONFIG_NUMA=n, dev_to_node(dev) returns -1, and numa_node_id() returns 0. Both are widely used, so it appears risky to change return values. Augment the check with IS_ENABLED(CONFIG_NUMA) instead to fix the problem. Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com> Fixes: 57ea974fb871 ("driver core: Rewrite test_async_driver_probe to cover serialization and NUMA affinity") Signed-off-by: Guenter Roeck <linux@roeck-us.net> Cc: stable <stable@vger.kernel.org> Acked-by: Alexander Duyck <alexander.h.duyck@linux.intel.com> Link: https://lore.kernel.org/r/20191127202453.28087-1-linux@roeck-us.net Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-02-01component: do not dereference opaque pointer in debugfsLubomir Rintel1-4/+4
commit ef9ffc1e5f1ac73ecd2fb3b70db2a3b2472ff2f7 upstream. The match data does not have to be a struct device pointer, and indeed very often is not. Attempt to treat it as such easily results in a crash. For the components that are not registered, we don't know which device is missing. Once it it is there, we can use the struct component to get the device and whether it's bound or not. Fixes: 59e73854b5fd ('component: add debugfs support') Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Cc: stable <stable@vger.kernel.org> Cc: Arnaud Pouliquen <arnaud.pouliquen@st.com> Link: https://lore.kernel.org/r/20191118115431.63626-1-lkundrak@v3.sk Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-01-26software node: Get reference to parent swnode in get_parent opSakari Ailus1-1/+4
[ Upstream commit 51c100a651a471fcb8ead1ecc1224471eb0d61b9 ] The software_node_get_parent() returned a pointer to the parent swnode, but did not take a reference to it, leading the caller to put a reference that was not taken. Take that reference now. Fixes: 59abd83672f7 ("drivers: base: Introducing software nodes to the firmware node framework") Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com> Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-01-23Fix built-in early-load Intel microcode alignmentJari Ruusu1-1/+1
commit f5ae2ea6347a308cfe91f53b53682ce635497d0d upstream. Intel Software Developer's Manual, volume 3, chapter 9.11.6 says: "Note that the microcode update must be aligned on a 16-byte boundary and the size of the microcode update must be 1-KByte granular" When early-load Intel microcode is loaded from initramfs, userspace tool 'iucode_tool' has already 16-byte aligned those microcode bits in that initramfs image. Image that was created something like this: iucode_tool --write-earlyfw=FOO.cpio microcode-files... However, when early-load Intel microcode is loaded from built-in firmware BLOB using CONFIG_EXTRA_FIRMWARE= kernel config option, that 16-byte alignment is not guaranteed. Fix this by forcing all built-in firmware BLOBs to 16-byte alignment. [ If we end up having other firmware with much bigger alignment requirements, we might need to introduce some method for the firmware to specify it, this is the minimal "just increase the alignment a bit to account for this one special case" patch - Linus ] Signed-off-by: Jari Ruusu <jari.ruusu@gmail.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Luis Chamberlain <mcgrof@kernel.org> Cc: stable@kernel.org Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-12-31firmware_loader: Fix labels with comma for builtin firmwareLinus Walleij1-1/+2
[ Upstream commit 553671b7685972ca671da5f71cf6414b54376e13 ] Some firmware images contain a comma, such as: EXTRA_FIRMWARE "brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt" as Broadcom firmware simply tags the device tree compatible string at the end of the firmware parameter file. And the compatible string contains a comma. This doesn't play well with gas: drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S: Assembler messages: drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S:4: Error: bad instruction `_fw_brcm_brcmfmac4334_sdio_samsung,gt_s7710_txt_bin:' drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S:9: Error: bad instruction `_fw_brcm_brcmfmac4334_sdio_samsung,gt_s7710_txt_name:' drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.S:15: Error: can't resolve `.rodata' {.rodata section} - `_fw_brcm_brcmfmac4334_sdio_samsung' {*UND* section} make[6]: *** [../scripts/Makefile.build:357: drivers/base/firmware_loader/builtin/brcm/brcmfmac4334-sdio.samsung,gt-s7710.txt.gen.o] Error 1 We need to get rid of the comma from the labels used by the assembly stub generator. Replacing a comma using GNU Make subst requires a helper variable. Cc: Stephan Gerhold <stephan@gerhold.net> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Link: https://lore.kernel.org/r/20191115225911.3260-1-linus.walleij@linaro.org Acked-by: Luis Chamberlain <mcgrof@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Signed-off-by: Sasha Levin <sashal@kernel.org>
2019-12-05driver core: platform: use the correct callback type for bus_find_deviceSami Tolvanen1-1/+6
commit 492c88720d36eb662f9f10c1633f7726fbb07fc4 upstream. platform_find_device_by_driver calls bus_find_device and passes platform_match as the callback function. Casting the function to a mismatching type trips indirect call Control-Flow Integrity (CFI) checking. This change adds a callback function with the correct type and instead of casting the function, explicitly casts the second parameter to struct device_driver* as expected by platform_match. Fixes: 36f3313d6bff9 ("platform: Add platform_find_device_by_driver() helper") Signed-off-by: Sami Tolvanen <samitolvanen@google.com> Reviewed-by: Kees Cook <keescook@chromium.org> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20191112214156.3430-1-samitolvanen@google.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-11-16mm/memory_hotplug: fix try_offline_node()David Hildenbrand1-0/+36
try_offline_node() is pretty much broken right now: - The node span is updated when onlining memory, not when adding it. We ignore memory that was mever onlined. Bad. - We touch possible garbage memmaps. The pfn_to_nid(pfn) can easily trigger a kernel panic. Bad for memory that is offline but also bad for subsection hotadd with ZONE_DEVICE, whereby the memmap of the first PFN of a section might contain garbage. - Sections belonging to mixed nodes are not properly considered. As memory blocks might belong to multiple nodes, we would have to walk all pageblocks (or at least subsections) within present sections. However, we don't have a way to identify whether a memmap that is not online was initialized (relevant for ZONE_DEVICE). This makes things more complicated. Luckily, we can piggy pack on the node span and the nid stored in memory blocks. Currently, the node span is grown when calling move_pfn_range_to_zone() - e.g., when onlining memory, and shrunk when removing memory, before calling try_offline_node(). Sysfs links are created via link_mem_sections(), e.g., during boot or when adding memory. If the node still spans memory or if any memory block belongs to the nid, we don't set the node offline. As memory blocks that span multiple nodes cannot get offlined, the nid stored in memory blocks is reliable enough (for such online memory blocks, the node still spans the memory). Introduce for_each_memory_block() to efficiently walk all memory blocks. Note: We will soon stop shrinking the ZONE_DEVICE zone and the node span when removing ZONE_DEVICE memory to fix similar issues (access of garbage memmaps) - until we have a reliable way to identify whether these memmaps were properly initialized. This implies later, that once a node had ZONE_DEVICE memory, we won't be able to set a node offline - which should be acceptable. Since commit f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") memory that is added is not assoziated with a zone/node (memmap not initialized). The introducing commit 60a5a19e7419 ("memory-hotplug: remove sysfs file of node") already missed that we could have multiple nodes for a section and that the zone/node span is updated when onlining pages, not when adding them. I tested this by hotplugging two DIMMs to a memory-less and cpu-less NUMA node. The node is properly onlined when adding the DIMMs. When removing the DIMMs, the node is properly offlined. Masayoshi Mizuma reported: : Without this patch, memory hotplug fails as panic: : : BUG: kernel NULL pointer dereference, address: 0000000000000000 : ... : Call Trace: : remove_memory_block_devices+0x81/0xc0 : try_remove_memory+0xb4/0x130 : __remove_memory+0xa/0x20 : acpi_memory_device_remove+0x84/0x100 : acpi_bus_trim+0x57/0x90 : acpi_bus_trim+0x2e/0x90 : acpi_device_hotplug+0x2b2/0x4d0 : acpi_hotplug_work_fn+0x1a/0x30 : process_one_work+0x171/0x380 : worker_thread+0x49/0x3f0 : kthread+0xf8/0x130 : ret_from_fork+0x35/0x40 [david@redhat.com: v3] Link: http://lkml.kernel.org/r/20191102120221.7553-1-david@redhat.com Link: http://lkml.kernel.org/r/20191028105458.28320-1-david@redhat.com Fixes: 60a5a19e7419 ("memory-hotplug: remove sysfs file of node") Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") # visiable after d0dc12e86b319 Signed-off-by: David Hildenbrand <david@redhat.com> Tested-by: Masayoshi Mizuma <m.mizuma@jp.fujitsu.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Keith Busch <keith.busch@intel.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: "Peter Zijlstra (Intel)" <peterz@infradead.org> Cc: Jani Nikula <jani.nikula@intel.com> Cc: Nayna Jain <nayna@linux.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-11-04x86/bugs: Add ITLB_MULTIHIT bug infrastructureVineela Tummalapalli1-0/+8
Some processors may incur a machine check error possibly resulting in an unrecoverable CPU lockup when an instruction fetch encounters a TLB multi-hit in the instruction TLB. This can occur when the page size is changed along with either the physical address or cache type. The relevant erratum can be found here: https://bugzilla.kernel.org/show_bug.cgi?id=205195 There are other processors affected for which the erratum does not fully disclose the impact. This issue affects both bare-metal x86 page tables and EPT. It can be mitigated by either eliminating the use of large pages or by using careful TLB invalidations when changing the page size in the page tables. Just like Spectre, Meltdown, L1TF and MDS, a new bit has been allocated in MSR_IA32_ARCH_CAPABILITIES (PSCHANGE_MC_NO) and will be set on CPUs which are mitigated against this issue. Signed-off-by: Vineela Tummalapalli <vineela.tummalapalli@intel.com> Co-developed-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-10-28x86/speculation/taa: Add sysfs reporting for TSX Async AbortPawan Gupta1-0/+9
Add the sysfs reporting file for TSX Async Abort. It exposes the vulnerability and the mitigation state similar to the existing files for the other hardware vulnerabilities. Sysfs file path is: /sys/devices/system/cpu/vulnerabilities/tsx_async_abort Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com> Signed-off-by: Borislav Petkov <bp@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Tested-by: Neelima Krishnan <neelima.krishnan@intel.com> Reviewed-by: Mark Gross <mgross@linux.intel.com> Reviewed-by: Tony Luck <tony.luck@intel.com> Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Reviewed-by: Josh Poimboeuf <jpoimboe@redhat.com>
2019-10-21PM: QoS: Drop frequency QoS types from device PM QoSRafael J. Wysocki1-68/+2
There are no more active users of DEV_PM_QOS_MIN_FREQUENCY and DEV_PM_QOS_MAX_FREQUENCY device PM QoS request types, so drop them along with the code supporting them. Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
2019-10-19drivers/base/memory.c: don't access uninitialized memmaps in ↵David Hildenbrand1-0/+3
soft_offline_page_store() Uninitialized memmaps contain garbage and in the worst case trigger kernel BUGs, especially with CONFIG_PAGE_POISONING. They should not get touched. Right now, when trying to soft-offline a PFN that resides on a memory block that was never onlined, one gets a misleading error with CONFIG_PAGE_POISONING: :/# echo 5637144576 > /sys/devices/system/memory/soft_offline_page [ 23.097167] soft offline: 0x150000 page already poisoned But the actual result depends on the garbage in the memmap. soft_offline_page() can only work with online pages, it returns -EIO in case of ZONE_DEVICE. Make sure to only forward pages that are online (iow, managed by the buddy) and, therefore, have an initialized memmap. Add a check against pfn_to_online_page() and similarly return -EIO. Link: http://lkml.kernel.org/r/20191010141200.8985-1-david@redhat.com Fixes: f1dd2cd13c4b ("mm, memory_hotplug: do not associate hotadded memory to zones until online") [visible after d0dc12e86b319] Signed-off-by: David Hildenbrand <david@redhat.com> Acked-by: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: <stable@vger.kernel.org> [4.13+] Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-10-18Merge branches 'pm-cpufreq' and 'pm-sleep'Rafael J. Wysocki1-0/+3
* pm-cpufreq: ACPI: processor: Avoid NULL pointer dereferences at init time cpufreq: Avoid cpufreq_suspend() deadlock on system shutdown * pm-sleep: PM: sleep: include <linux/pm_runtime.h> for pm_wq ACPI: PM: Drop Dell XPS13 9360 from LPS0 Idle _DSM blacklist
2019-10-10cpufreq: Avoid cpufreq_suspend() deadlock on system shutdownRafael J. Wysocki1-0/+3
It is incorrect to set the cpufreq syscore shutdown callback pointer to cpufreq_suspend(), because that function cannot be run in the syscore stage of system shutdown for two reasons: (a) it may attempt to carry out actions depending on devices that have already been shut down at that point and (b) the RCU synchronization carried out by it may not be able to make progress then. The latter issue has been present since commit 45975c7d21a1 ("rcu: Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds"), but the former one has been there since commit 90de2a4aa9f3 ("cpufreq: suspend cpufreq governors on shutdown") regardless. Fix that by dropping cpufreq_syscore_ops altogether and making device_shutdown() call cpufreq_suspend() directly before shutting down devices, which is along the lines of what system-wide power management does. Fixes: 45975c7d21a1 ("rcu: Define RCU-sched API in terms of RCU for Tree RCU PREEMPT builds") Fixes: 90de2a4aa9f3 ("cpufreq: suspend cpufreq governors on shutdown") Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Tested-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Acked-by: Viresh Kumar <viresh.kumar@linaro.org> Cc: 4.0+ <stable@vger.kernel.org> # 4.0+
2019-10-07driver core: platform: Add platform_get_irq_byname_optional()Hans de Goede1-7/+39
Some drivers (e.g dwc3) first try to get an IRQ byname and then fall back to the one at index 0. In this case we do not want the error(s) printed by platform_get_irq_byname(). This commit adds a new platform_get_irq_byname_optional(), which does not print errors, for this. While at it also improve the kdoc text for platform_get_irq_byname() a bit. BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=205037 Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Link: https://lore.kernel.org/r/20191005210449.3926-2-hdegoede@redhat.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-09-25mm,thp: stats for file backed THPSong Liu1-0/+6
In preparation for non-shmem THP, this patch adds a few stats and exposes them in /proc/meminfo, /sys/bus/node/devices/<node>/meminfo, and /proc/<pid>/task/<tid>/smaps. This patch is mostly a rewrite of Kirill A. Shutemov's earlier version: https://lkml.kernel.org/r/20170126115819.58875-5-kirill.shutemov@linux.intel.com/ Link: http://lkml.kernel.org/r/20190801184244.3169074-5-songliubraving@fb.com Signed-off-by: Song Liu <songliubraving@fb.com> Acked-by: Rik van Riel <riel@surriel.com> Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Acked-by: Johannes Weiner <hannes@cmpxchg.org> Cc: Hillf Danton <hdanton@sina.com> Cc: Hugh Dickins <hughd@google.com> Cc: William Kucharski <william.kucharski@oracle.com> Cc: Oleg Nesterov <oleg@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25drivers/base/memory.c: don't store end_section_nr in memory blocksDavid Hildenbrand2-6/+5
Each memory block spans the same amount of sections/pages/bytes. The size is determined before the first memory block is created. No need to store what we can easily calculate - and the calculations even look simpler now. Michal brought up the idea of variable-sized memory blocks. However, if we ever implement something like this, we will need an API compatibility switch and reworks at various places (most code assumes a fixed memory block size). So let's cleanup what we have right now. While at it, fix the variable naming in register_mem_sect_under_node() - we no longer talk about a single section. Link: http://lkml.kernel.org/r/20190809110200.2746-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25driver/base/memory.c: validate memory block size earlyDavid Hildenbrand1-22/+9
Let's validate the memory block size early, when initializing the memory device infrastructure. Fail hard in case the value is not suitable. As nobody checks the return value of memory_dev_init(), turn it into a void function and fail with a panic in all scenarios instead. Otherwise, we'll crash later during boot when core/drivers expect that the memory device infrastructure (including memory_block_size_bytes()) works as expected. I think long term, we should move the whole memory block size configuration (set_memory_block_size_order() and memory_block_size_bytes()) into drivers/base/memory.c. Link: http://lkml.kernel.org/r/20190806090142.22709-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25drivers/base/memory.c: fixup documentation of ↵David Hildenbrand1-5/+6
removable/phys_index/block_size_bytes Let's rephrase to memory block terminology and add some further clarifications. Link: http://lkml.kernel.org/r/20190806080826.5963-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Andrew Morton <akpm@linux-foundation.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-25drivers/base/node.c: simplify unregister_memory_block_under_nodes()David Hildenbrand2-24/+16
We don't allow to offline memory block devices that belong to multiple numa nodes. Therefore, such devices can never get removed. It is sufficient to process a single node when removing the memory block. No need to iterate over each and every PFN. We already have the nid stored for each memory block. Make sure that the nid always has a sane value. Please note that checking for node_online(nid) is not required. If we would have a memory block belonging to a node that is no longer offline, then we would have a BUG in the node offlining code. Link: http://lkml.kernel.org/r/20190719135244.15242-1-david@redhat.com Signed-off-by: David Hildenbrand <david@redhat.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: "Rafael J. Wysocki" <rafael@kernel.org> Cc: David Hildenbrand <david@redhat.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Cc: Pavel Tatashin <pasha.tatashin@soleen.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Oscar Salvador <osalvador@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2019-09-19Merge branch 'work.mount2' of ↵Linus Torvalds1-9/+29
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc mount API conversions from Al Viro: "Conversions to new API for shmem and friends and for mount_mtd()-using filesystems. As for the rest of the mount API conversions in -next, some of them belong in the individual trees (e.g. binderfs one should definitely go through android folks, after getting redone on top of their changes). I'm going to drop those and send the rest (trivial ones + stuff ACKed by maintainers) in a separate series - by that point they are independent from each other. Some stuff has already migrated into individual trees (NFS conversion, for example, or FUSE stuff, etc.); those presumably will go through the regular merges from corresponding trees." * 'work.mount2' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: vfs: Make fs_parse() handle fs_param_is_fd-type params better vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API shmem_parse_one(): switch to use of fs_parse() shmem_parse_options(): take handling a single option into a helper shmem_parse_options(): don't bother with mpol in separate variable shmem_parse_options(): use a separate structure to keep the results make shmem_fill_super() static make ramfs_fill_super() static devtmpfs: don't mix {ramfs,shmem}_fill_super() with mount_single() vfs: Convert squashfs to use the new mount API mtd: Kill mount_mtd() vfs: Convert jffs2 to use the new mount API vfs: Convert cramfs to use the new mount API vfs: Convert romfs to use the new mount API vfs: Add a single-or-reconfig keying to vfs_get_super()
2019-09-18Merge tag 'usb-5.4-rc1' of ↵Linus Torvalds2-33/+47
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb Pull USB updates from Greg KH: "Here is the big set of USB patches for 5.4-rc1. Two major chunks of code are moving out of the tree and into the staging directory, uwb and wusb (wireless USB support), because there are no devices that actually use this protocol anymore, and what we have today probably doesn't work at all given that the maintainers left many many years ago. So move it to staging where it will be removed in a few releases if no one screams. Other than that, lots of little things. The usual gadget and xhci and usb serial driver updates, along with a bunch of sysfs file cleanups due to the driver core changes to support that. Nothing really major, just constant forward progress. All of these have been in linux-next for a while with no reported issues" * tag 'usb-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (159 commits) USB: usbcore: Fix slab-out-of-bounds bug during device reset usb: cdns3: Remove redundant dev_err call in cdns3_probe() USB: rio500: Fix lockdep violation USB: rio500: simplify locking usb: mtu3: register a USB Role Switch for dual role mode usb: common: add USB GPIO based connection detection driver usb: common: create Kconfig file usb: roles: get usb-role-switch from parent usb: roles: Add fwnode_usb_role_switch_get() function device connection: Add fwnode_connection_find_match() usb: roles: Introduce stubs for the exiting functions in role.h dt-bindings: usb: mtu3: add properties about USB Role Switch dt-bindings: usb: add binding for USB GPIO based connection detection driver dt-bindings: connector: add optional properties for Type-B dt-binding: usb: add usb-role-switch property usbip: Implement SG support to vhci-hcd and stub driver usb: roles: intel: Enable static DRD mode for role switch xhci-ext-caps.c: Add property to disable Intel SW switch usb: dwc3: remove generic PHY calibrate() calls usb: core: phy: add support for PHY calibration ...
2019-09-18Merge tag 'driver-core-5.4-rc1' of ↵Linus Torvalds5-99/+177
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core Pull driver core updates from Greg Kroah-Hartman: "Here is the big driver core update for 5.4-rc1. There was a bit of a churn in here, with a number of core and OF platform patches being added to the tree, and then after much discussion and review and a day-long in-person meeting, they were decided to be reverted and a new set of patches is currently being reviewed on the mailing list. Other than that churn, there are two "persistent" branches in here that other trees will be pulling in as well during the merge window. One branch to add support for drivers to have the driver core automatically add sysfs attribute files when a driver is bound to a device so that the driver doesn't have to manually do it (and then clean it up, as it always gets it wrong). There's another branch in here for generic lookup helpers for the driver core that lots of busses are starting to use. That's the majority of the non-driver-core changes in this patch series. There's also some on-going debugfs file creation cleanup that has been slowly happening over the past few releases, with the goal to hopefully get that done sometime next year. All of these have been in linux-next for a while now with no reported issues" [ Note that the above-mentioned generic lookup helpers branch was already brought in by the LED merge (commit 4feaab05dc1e) that had shared it. Also note that that common branch introduced an i2c bug due to a bad conversion, which got fixed here. - Linus ] * tag 'driver-core-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (49 commits) coccinelle: platform_get_irq: Fix parse error driver-core: add include guard to linux/container.h sysfs: add BIN_ATTR_WO() macro driver core: platform: Export platform_get_irq_optional() hwmon: pwm-fan: Use platform_get_irq_optional() driver core: platform: Introduce platform_get_irq_optional() Revert "driver core: Add support for linking devices during device addition" Revert "driver core: Add edit_links() callback for drivers" Revert "of/platform: Add functional dependency link from DT bindings" Revert "driver core: Add sync_state driver/bus callback" Revert "of/platform: Pause/resume sync state during init and of_platform_populate()" Revert "of/platform: Create device links for all child-supplier depencencies" Revert "of/platform: Don't create device links for default busses" Revert "of/platform: Fix fn definitons for of_link_is_valid() and of_link_property()" Revert "of/platform: Fix device_links_supplier_sync_state_resume() warning" Revert "of/platform: Disable generic device linking code for PowerPC" devcoredump: fix typo in comment devcoredump: use memory_read_from_buffer of/platform: Disable generic device linking code for PowerPC device.h: Fix warnings for mismatched parameter names in comments ...
2019-09-18Merge tag 'devprop-5.4-rc1' of ↵Linus Torvalds1-1/+38
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull device properties framework updates from Rafael Wysocki: "Improve software node support (Heikki Krogerus) and clean up two assorted pieces of code (Andy Shevchenko, Geert Uytterhoeven)" * tag 'devprop-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: software node: Initialize the return value in software_node_find_by_name() software node: Initialize the return value in software_node_to_swnode() ACPI / property: Fix acpi_graph_get_remote_endpoint() name in kerneldoc device property: Remove duplicate test for NULL platform/x86: intel_cht_int33fe: Use new API to gain access to the role switch usb: roles: intel_xhci: Supplying software node for the role mux software node: Add software_node_find_by_name()
2019-09-18Merge tag 'pm-5.4-rc1' of ↵Linus Torvalds8-66/+308
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management updates from Rafael Wysocki: "These include a rework of the main suspend-to-idle code flow (related to the handling of spurious wakeups), a switch over of several users of cpufreq notifiers to QoS-based limits, a new devfreq driver for Tegra20, a new cpuidle driver and governor for virtualized guests, an extension of the wakeup sources framework to expose wakeup sources as device objects in sysfs, and more. Specifics: - Rework the main suspend-to-idle control flow to avoid repeating "noirq" device resume and suspend operations in case of spurious wakeups from the ACPI EC and decouple the ACPI EC wakeups support from the LPS0 _DSM support (Rafael Wysocki). - Extend the wakeup sources framework to expose wakeup sources as device objects in sysfs (Tri Vo, Stephen Boyd). - Expose system suspend statistics in sysfs (Kalesh Singh). - Introduce a new haltpoll cpuidle driver and a new matching governor for virtualized guests wanting to do guest-side polling in the idle loop (Marcelo Tosatti, Joao Martins, Wanpeng Li, Stephen Rothwell). - Fix the menu and teo cpuidle governors to allow the scheduler tick to be stopped if PM QoS is used to limit the CPU idle state exit latency in some cases (Rafael Wysocki). - Increase the resolution of the play_idle() argument to microseconds for more fine-grained injection of CPU idle cycles (Daniel Lezcano). - Switch over some users of cpuidle notifiers to the new QoS-based frequency limits and drop the CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events (Viresh Kumar). - Add new cpufreq driver based on nvmem for sun50i (Yangtao Li). - Add support for MT8183 and MT8516 to the mediatek cpufreq driver (Andrew-sh.Cheng, Fabien Parent). - Add i.MX8MN support to the imx-cpufreq-dt cpufreq driver (Anson Huang). - Add qcs404 to cpufreq-dt-platdev blacklist (Jorge Ramirez-Ortiz). - Update the qcom cpufreq driver (among other things, to make it easier to extend and to use kryo cpufreq for other nvmem-based SoCs) and add qcs404 support to it (Niklas Cassel, Douglas RAILLARD, Sibi Sankar, Sricharan R). - Fix assorted issues and make assorted minor improvements in the cpufreq code (Colin Ian King, Douglas RAILLARD, Florian Fainelli, Gustavo Silva, Hariprasad Kelam). - Add new devfreq driver for NVidia Tegra20 (Dmitry Osipenko, Arnd Bergmann). - Add new Exynos PPMU events to devfreq events and extend that mechanism (Lukasz Luba). - Fix and clean up the exynos-bus devfreq driver (Kamil Konieczny). - Improve devfreq documentation and governor code, fix spelling typos in devfreq (Ezequiel Garcia, Krzysztof Kozlowski, Leonard Crestez, MyungJoo Ham, Gaël PORTAY). - Add regulators enable and disable to the OPP (operating performance points) framework (Kamil Konieczny). - Update the OPP framework to support multiple opp-suspend properties (Anson Huang). - Fix assorted issues and make assorted minor improvements in the OPP code (Niklas Cassel, Viresh Kumar, Yue Hu). - Clean up the generic power domains (genpd) framework (Ulf Hansson). - Clean up assorted pieces of power management code and documentation (Akinobu Mita, Amit Kucheria, Chuhong Yuan). - Update the pm-graph tool to version 5.5 including multiple fixes and improvements (Todd Brandt). - Update the cpupower utility (Benjamin Weis, Geert Uytterhoeven, Sébastien Szymanski)" * tag 'pm-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (126 commits) cpuidle-haltpoll: Enable kvm guest polling when dedicated physical CPUs are available cpuidle-haltpoll: do not set an owner to allow modunload cpuidle-haltpoll: return -ENODEV on modinit failure cpuidle-haltpoll: set haltpoll as preferred governor cpuidle: allow governor switch on cpuidle_register_driver() PM: runtime: Documentation: add runtime_status ABI document pm-graph: make setVal unbuffered again for python2 and python3 powercap: idle_inject: Use higher resolution for idle injection cpuidle: play_idle: Increase the resolution to usec cpuidle-haltpoll: vcpu hotplug support cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state() PM / Domains: Simplify genpd_lookup_dev() ...
2019-09-18Merge tag 'leds-for-5.4-rc1' of ↵Linus Torvalds4-39/+46
git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds Pull LED updates from Jacek Anaszewski: "In this cycle we've finally managed to contribute the patch set sorting out LED naming issues. Besides that there are many changes scattered among various LED class drivers and triggers. LED naming related improvements: - add new 'function' and 'color' fwnode properties and deprecate 'label' property which has been frequently abused for conveying vendor specific names that have been available in sysfs anyway - introduce a set of standard LED_FUNCTION* definitions - introduce a set of standard LED_COLOR_ID* definitions - add a new {devm_}led_classdev_register_ext() API with the capability of automatic LED name composition basing on the properties available in the passed fwnode; the function is backwards compatible in a sense that it uses 'label' data, if present in the fwnode, for creating LED name - add tools/leds/get_led_device_info.sh script for retrieving LED vendor, product and bus names, if applicable; it also performs basic validation of an LED name - update following drivers and their DT bindings to use the new LED registration API: - leds-an30259a, leds-gpio, leds-as3645a, leds-aat1290, leds-cr0014114, leds-lm3601x, leds-lm3692x, leds-lp8860, leds-lt3593, leds-sc27xx-blt Other LED class improvements: - replace {devm_}led_classdev_register() macros with inlines - allow to call led_classdev_unregister() unconditionally - switch to use fwnode instead of be stuck with OF one LED triggers improvements: - led-triggers: - fix dereferencing of null pointer - fix a memory leak bug - ledtrig-gpio: - GPIO 0 is valid Drop superseeded apu2/3 support from leds-apu since for apu2+ a newer, more complete driver exists, based on a generic driver for the AMD SOCs gpio-controller, supporting LEDs as well other devices: - drop profile field from priv data - drop iosize field from priv data - drop enum_apu_led_platform_types - drop superseeded apu2/3 led support - add pr_fmt prefix for better log output - fix error message on probing failure Other misc fixes and improvements to existing LED class drivers: - leds-ns2, leds-max77650: - add of_node_put() before return - leds-pwm, leds-is31fl32xx: - use struct_size() helper - leds-lm3697, leds-lm36274, leds-lm3532: - switch to use fwnode_property_count_uXX() - leds-lm3532: - fix brightness control for i2c mode - change the define for the fs current register - fixes for the driver for stability - add full scale current configuration - dt: Add property for full scale current. - avoid potentially unpaired regulator calls - move static keyword to the front of declarations - fix optional led-max-microamp prop error handling - leds-max77650: - add of_node_put() before return - add MODULE_ALIAS() - Switch to fwnode property API - leds-as3645a: - fix misuse of strlcpy - leds-netxbig: - add of_node_put() in netxbig_leds_get_of_pdata() - remove legacy board-file support - leds-is31fl319x: - simplify getting the adapter of a client - leds-ti-lmu-common: - fix coccinelle issue - move static keyword to the front of declaration - leds-syscon: - use resource managed variant of device register - leds-ktd2692: - fix a typo in the name of a constant - leds-lp5562: - allow firmware files up to the maximum length - leds-an30259a: - fix typo - leds-pca953x: - include the right header" * tag 'leds-for-5.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds: (72 commits) leds: lm3532: Fix optional led-max-microamp prop error handling led: triggers: Fix dereferencing of null pointer leds: ti-lmu-common: Move static keyword to the front of declaration leds: lm3532: Move static keyword to the front of declarations leds: trigger: gpio: GPIO 0 is valid leds: pwm: Use struct_size() helper leds: is31fl32xx: Use struct_size() helper leds: ti-lmu-common: Fix coccinelle issue in TI LMU leds: lm3532: Avoid potentially unpaired regulator calls leds: syscon: Use resource managed variant of device register leds: Replace {devm_}led_classdev_register() macros with inlines leds: Allow to call led_classdev_unregister() unconditionally leds: lm3532: Add full scale current configuration dt: lm3532: Add property for full scale current. leds: lm3532: Fixes for the driver for stability leds: lm3532: Change the define for the fs current register leds: lm3532: Fix brightness control for i2c mode leds: Switch to use fwnode instead of be stuck with OF one leds: max77650: Switch to fwnode property API led: triggers: Fix a memory leak bug ...
2019-09-17Merge branches 'pm-opp', 'pm-qos', 'acpi-pm', 'pm-domains' and 'pm-tools'Rafael J. Wysocki1-15/+10
* pm-opp: PM / OPP: Correct Documentation about library location opp: of: Support multiple suspend OPPs defined in DT dt-bindings: opp: Support multiple opp-suspend properties opp: core: add regulators enable and disable opp: Don't decrement uninitialized list_kref * pm-qos: PM: QoS: Get rid of unused flags * acpi-pm: ACPI: PM: Print debug messages on device power state changes * pm-domains: PM / Domains: Verify PM domain type in dev_pm_genpd_set_performance_state() PM / Domains: Simplify genpd_lookup_dev() PM / Domains: Align in-parameter names for some genpd functions * pm-tools: pm-graph: make setVal unbuffered again for python2 and python3 cpupower: update German translation tools/power/cpupower: fix 64bit detection when cross-compiling cpupower: Add missing newline at end of file pm-graph v5.5
2019-09-17Merge branch 'pm-cpufreq'Rafael J. Wysocki1-1/+1
* pm-cpufreq: (36 commits) cpufreq: Add qcs404 to cpufreq-dt-platdev blacklist cpufreq: qcom: Add support for qcs404 on nvmem driver cpufreq: qcom: Refactor the driver to make it easier to extend cpufreq: qcom: Re-organise kryo cpufreq to use it for other nvmem based qcom socs dt-bindings: opp: Add qcom-opp bindings with properties needed for CPR dt-bindings: opp: qcom-nvmem: Support pstates provided by a power domain Documentation: cpufreq: Update policy notifier documentation cpufreq: Remove CPUFREQ_ADJUST and CPUFREQ_NOTIFY policy notifier events sched/cpufreq: Align trace event behavior of fast switching ACPI: cpufreq: Switch to QoS requests instead of cpufreq notifier video: pxafb: Remove cpufreq policy notifier video: sa1100fb: Remove cpufreq policy notifier arch_topology: Use CPUFREQ_CREATE_POLICY instead of CPUFREQ_NOTIFY cpufreq: powerpc_cbe: Switch to QoS requests for freq limits cpufreq: powerpc: macintosh: Switch to QoS requests for freq limits cpufreq: Print driver name if cpufreq_suspend() fails cpufreq: mediatek: Add support for mt8183 cpufreq: mediatek: change to regulator_get_optional cpufreq: imx-cpufreq-dt: Add i.MX8MN support cpufreq: Use imx-cpufreq-dt for i.MX8MN's speed grading ...
2019-09-17Merge branch 'pm-sleep'Rafael J. Wysocki6-50/+297
* pm-sleep: (29 commits) ACPI: PM: s2idle: Always set up EC GPE for system wakeup ACPI: PM: s2idle: Avoid rearming SCI for wakeup unnecessarily PM / wakeup: Unexport wakeup_source_sysfs_{add,remove}() PM / wakeup: Register wakeup class kobj after device is added PM / wakeup: Fix sysfs registration error path PM / wakeup: Show wakeup sources stats in sysfs PM / wakeup: Use wakeup_source_register() in wakelock.c PM / wakeup: Drop wakeup_source_init(), wakeup_source_prepare() PM: sleep: Replace strncmp() with str_has_prefix() PM: suspend: Fix platform_suspend_prepare_noirq() intel-hid: Disable button array during suspend-to-idle intel-hid: intel-vbtn: Avoid leaking wakeup_mode set ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message ACPI: EC: PM: Consolidate some code depending on PM_SLEEP ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events() ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter ACPI: PM: s2idle: Rearrange lps0_device_attach() PM/sleep: Expose suspend stats in sysfs ...
2019-09-17Merge suspend-to-idle rework material for v5.4.Rafael J. Wysocki2-24/+13
* pm-s2idle-rework: (21 commits) ACPI: PM: s2idle: Always set up EC GPE for system wakeup ACPI: PM: s2idle: Avoid rearming SCI for wakeup unnecessarily PM: suspend: Fix platform_suspend_prepare_noirq() intel-hid: Disable button array during suspend-to-idle intel-hid: intel-vbtn: Avoid leaking wakeup_mode set ACPI: PM: s2idle: Execute LPS0 _DSM functions with suspended devices ACPI: EC: PM: Make acpi_ec_dispatch_gpe() print debug message ACPI: EC: PM: Consolidate some code depending on PM_SLEEP ACPI: PM: s2idle: Eliminate acpi_sleep_no_ec_events() ACPI: PM: s2idle: Switch EC over to polling during "noirq" suspend ACPI: PM: s2idle: Add acpi.sleep_no_lps0 module parameter ACPI: PM: s2idle: Rearrange lps0_device_attach() ACPI: PM: Set up EC GPE for system wakeup from drivers that need it PM: sleep: Drop dpm_noirq_begin() and dpm_noirq_end() PM: sleep: Integrate suspend-to-idle with generig suspend flow PM: sleep: Simplify suspend-to-idle control flow ACPI: PM: Set s2idle_wakeup earlier and clear it later PM: sleep: Fix possible overflow in pm_system_cancel_wakeup() ACPI: EC: Return bool from acpi_ec_dispatch_gpe() ACPICA: Return u32 from acpi_dispatch_gpe() ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-21 13:03:57 +0300