summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_at91.c
AgeCommit message (Collapse)AuthorFilesLines
2015-05-20ata: at91: use syscon to configure the smcAlexandre Belloni1-21/+71
Use syscon/regmap to configure the smc. This allows to avoid using at91sam9_smc.h and to compile the driver in a multiplatform configuration. The driver will still not probe until the proper DT bindings are added. That binding will include an atmel,smc property that is a phandle to the SMC the CF controller is connected to. Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
2014-10-20ata: drop owner assignment from platform_driversWolfram Sang1-1/+0
A platform_driver does not need to set an owner, it will be populated by the driver core. Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
2014-04-02pata_at91: fix ata_host_activate() failure handlingBartlomiej Zolnierkiewicz1-5/+6
Add missing clk_put() call to ata_host_activate() failure path. Sergei says, "Hm, I have once fixed that (see that *if* (!ret)) but looks like a later commit 477c87e90853d136b188c50c0e4a93d01cad872e (ARM: at91/pata: use gpio_is_valid to check the gpio) broke it again. :-( Would be good if the changelog did mention that..." Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: Jean-Christophe Plagniol-Villard <plagnioj@jcrosoft.com> Cc: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
2014-02-14ata: delete non-required instances of include <linux/init.h>Paul Gortmaker1-1/+0
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. Cc: linux-ide@vger.kernel.org Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-07-30ata: use dev_get_platdata()Jingoo Han1-1/+1
Use the wrapper function for retrieving the platform data instead of accessing dev->platform_data directly. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-05-24ata: use platform_{get,set}_drvdata()Jingoo Han1-1/+1
Use the wrapper functions for getting and setting the driver data using platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev, so we can directly pass a struct platform_device. Also, unnecessary dev_set_drvdata() is removed, because the driver core clears the driver data to NULL after device_release or on probe failure. Signed-off-by: Jingoo Han <jg1.han@samsung.com> Signed-off-by: Tejun Heo <tj@kernel.org>
2013-01-04Drivers: ata: remove __dev* attributes.Greg Kroah-Hartman1-3/+3
CONFIG_HOTPLUG is going away as an option. As a result, the __dev* markings need to be removed. This change removes the use of __devinit, __devexit_p, __devinitdata, and __devexit from these drivers. Based on patches originally written by Bill Pemberton, but redone by me in order to handle some of the coding style issues better, by hand. Cc: Bill Pemberton <wfp5p@virginia.edu> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Viresh Kumar <viresh.linux@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2012-11-06arm: at91: move platfarm_data to include/linux/platform_data/atmel.hJean-Christophe PLAGNIOL-VILLARD1-1/+1
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com>
2012-02-13pata/at91: use newly introduced SMC accessorsJean-Christophe PLAGNIOL-VILLARD1-27/+21
pata_at91 driver is broken since faee0cc: "make smc register base soc independent" Fix it with newly introduced SMC accessors. The overall action of removal of at91_sys_read/write will allow to use the pata_at91 on a single zImage kernel. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: linux-ide@vger.kernel.org
2012-01-10Merge branch 'upstream-linus' of git://github.com/jgarzik/libata-devLinus Torvalds1-14/+1
* 'upstream-linus' of git://github.com/jgarzik/libata-dev: ahci: support the STA2X11 I/O Hub pata_bf54x: fix BMIDE status register emulation ata: add ata port hibernate callbacks ata: update ata port's runtime status during system resume [SCSI] runtime resume parent for child's system-resume ahci: platform support for suspend/resume libata-core: kill duplicate statement in ata_do_set_mode() pata_of_platform: remove direct dependency on OF_IRQ SATA/PATA: convert drivers/ata/* to use module_platform_driver() pata_cs5536: forward port changes from cs5536 libata-sff: use ATAPI_{COD|IO} ata: add ata port runtime PM callbacks ata: add ata port system PM callbacks [SCSI] sd: check runtime PM status in sd_shutdown [SCSI] check runtime PM status in system PM [SCSI] add flag to skip the runtime PM calls on the host ata: make ata port as parent device of scsi host ahci: start engine only during soft/hard resets
2012-01-09SATA/PATA: convert drivers/ata/* to use module_platform_driver()Axel Lin1-14/+1
This patch converts the drivers in drivers/ata/* to use the module_platform_driver() macro which makes the code smaller and a bit simpler. Cc: Viresh Kumar <viresh.kumar@st.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: Arnaud Patard <arnaud.patard@rtp-net.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: Sylvain Munaut <tnt@246tNt.com> Cc: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: Marek Vasut <marek.vasut@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Mark Miesfeld <mmiesfeld@amcc.com> Cc: Ashish Kalra <ashish.kalra@freescale.com> Cc: Paul Mundt <lethal@linux-sh.org> Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-11-29ARM: at91/pata: use gpio_is_valid to check the gpioJean-Christophe PLAGNIOL-VILLARD1-3/+3
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds1-1/+1
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-14pata_at91: call clk_put() on ata_host_activate() failureSergei Shtylyov1-1/+4
pata_at91_probe() forgets to call clk_put() iff ata_host_activate() fails... Signed-off-by: Sergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2011-08-08ARM: gpio: at91: convert drivers to use asm/gpio.h rather than mach/gpio.hRussell King1-1/+1
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-05-14pata_at91: SMC settings calculation bugfixes, support for t6z and IORDYIgor Plyatov1-99/+198
* New code correctly calculates SMC registers values, adjusts calculated to admissible ranges, enlarges cycles when required and converts values into SMC's format. * Support for TDF cycles (ATA t6z) and IORDY line added. * Eliminate need in the initial_timing structure. * Code cleanup. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ata: pata_at91.c bugfix for initial_timing initialisationIgor Plyatov1-2/+12
The "struct ata_timing" must contain 10 members, but ".dmack_hold" member was forgotten for "initial_timing" initialisation. This patch fixes such a problem. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2011-04-24ata: pata_at91.c bugfix for high master clockIgor Plyatov1-1/+7
The AT91SAM9 microcontrollers with master clock higher then 105 MHz and PIO0, have overflow of the NCS_RD_PULSE value in the MSB. This lead to "NCS_RD_PULSE" pulse longer then "NRD_CYCLE" pulse and driver does not detect ATA device. Signed-off-by: Igor Plyatov <plyatov@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2010-05-19libata-sff: clean up BMDMA initializationTejun Heo1-1/+0
When BMDMA initialization failed or BMDMA was not available for whatever reason, bmdma_addr was left at zero and used as an indication that BMDMA shouldn't be used. This leads to the following problems. p1. For BMDMA drivers which don't use traditional BMDMA register, ata_bmdma_mode_filter() incorrectly inhibits DMA modes. Those drivers either have to inherit from ata_sff_port_ops or clear ->mode_filter explicitly. p2. non-BMDMA drivers call into BMDMA PRD table allocation. It doesn't actually allocate PRD table if bmdma_addr is not initialized but is still confusing. p3. For BMDMA drivers which don't use traditional BMDMA register, some methods might not be invoked as expected (e.g. bmdma_stop from ata_sff_post_internal_cmd()). p4. SFF drivers w/ custom DMA interface implement noop BMDMA ops worrying libata core might call into one of them. These problems are caused by the muddy line between SFF and BMDMA and the assumption that all BMDMA controllers initialize bmdma_addr. This patch fixes p1 and p2 by removing the bmdma_addr assumption and moving prd allocation to BMDMA port start. Later patches will fix the remaining issues. This patch improves BMDMA initialization such that * When BMDMA register initialization fails, falls back to PIO instead of failing. ata_pci_bmdma_init() never fails now. * When ata_pci_bmdma_init() falls back to PIO, it clears ap->mwdma_mask and udma_mask instead of depending on ata_bmdma_mode_filter(). This makes ata_bmdma_mode_filter() unnecessary thus resolving p1. * ata_port_start() which actually is BMDMA specific is moved to ata_bmdma_port_start(). ata_port_start() and ata_sff_port_start() are killed. * ata_sff_port_start32() is moved and renamed to ata_bmdma_port_start32(). Drivers which no longer call into PRD table allocation are... pdc_adma, sata_inic162x, sata_qstor, sata_sx4, pata_cmd640 and all drivers which inherit from ata_sff_port_ops. pata_icside sets ->port_start to ATA_OP_NULL as it doesn't need PRD but is a BMDMA controller and doesn't have custom port_start like other such controllers. Note that with the previous patch which makes all and only BMDMA drivers inherit from ata_bmdma_port_ops, this change doesn't break drivers which need PRD table. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-01[libata] pata_at91: fix backslash-continued stringJeff Garzik1-2/+2
Noticed and rough patch by Joe Perches. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-08-12pata_at91: fix resource releaseTejun Heo1-13/+4
Julias Lawall discovered that pata_at91 wasn't freeing a memory region allocated with kzalloc() on init failure paths. Upon review, pata_at91 also seems to be doing unnecessary explicit resource releases for managed resources too. Convert memory allocation to managed one and drop unnecessary explicit resource releases. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Julia Lawall <julia@diku.dk> Cc: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-29libata: Updates and fixes for pata_at91 driverSergey Matyukevich1-31/+36
Please consider the following updates and fixes for pata_at91 driver. * Removed extra headers Here we need only static memory controller properties, which are contained in generic header at91sam9_smc.h. No need to include any specific headers for at91sam9260 SoC. * No harsh BUG_ON for get_clk in set_smc_timing function get_clk is now performed in driver probing function, probing fails if master clock is not available * Fixed uint/ulong mess in calc_mck_cycles function Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-07-15drivers/ata: Move a dereference below a NULL testJulia Lawall1-1/+2
If the NULL test is necessary, then the dereference should be moved below the NULL test. The semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ type T; expression E; identifier i,fld; statement S; @@ - T i = E->fld; + T i; ... when != E when != i if (E == NULL) S + i = E->fld; // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-06-23[libata] PATA driver for CF interface on AT91SAM9260 SoCSergey Matyukevich1-0/+361
This patch provides PATA driver for CompactFlash interface in True IDE mode on AT91SAM9260 SoC. Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>