summaryrefslogtreecommitdiff
path: root/crypto/Kconfig
AgeCommit message (Collapse)AuthorFilesLines
2018-05-30crypto: x86/salsa20 - remove x86 salsa20 implementationsEric Biggers1-28/+0
The x86 assembly implementations of Salsa20 use the frame base pointer register (%ebp or %rbp), which breaks frame pointer convention and breaks stack traces when unwinding from an interrupt in the crypto code. Recent (v4.10+) kernels will warn about this, e.g. WARNING: kernel stack regs at 00000000a8291e69 in syzkaller047086:4677 has bad 'bp' value 000000001077994c [...] But after looking into it, I believe there's very little reason to still retain the x86 Salsa20 code. First, these are *not* vectorized (SSE2/SSSE3/AVX2) implementations, which would be needed to get anywhere close to the best Salsa20 performance on any remotely modern x86 processor; they're just regular x86 assembly. Second, it's still unclear that anyone is actually using the kernel's Salsa20 at all, especially given that now ChaCha20 is supported too, and with much more efficient SSSE3 and AVX2 implementations. Finally, in benchmarks I did on both Intel and AMD processors with both gcc 8.1.0 and gcc 4.9.4, the x86_64 salsa20-asm is actually slightly *slower* than salsa20-generic (~3% slower on Skylake, ~10% slower on Zen), while the i686 salsa20-asm is only slightly faster than salsa20-generic (~15% faster on Skylake, ~20% faster on Zen). The gcc version made little difference. So, the x86_64 salsa20-asm is pretty clearly useless. That leaves just the i686 salsa20-asm, which based on my tests provides a 15-20% speed boost. But that's without updating the code to not use %ebp. And given the maintenance cost, the small speed difference vs. salsa20-generic, the fact that few people still use i686 kernels, the doubt that anyone is even using the kernel's Salsa20 at all, and the fact that a SSE2 implementation would almost certainly be much faster on any remotely modern x86 processor yet no one has cared enough to add one yet, I don't think it's worthwhile to keep. Thus, just remove both the x86_64 and i686 salsa20-asm implementations. Reported-by: syzbot+ffa3a158337bbc01ff09@syzkaller.appspotmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-30crypto: morus - Mark MORUS SIMD glue as x86-specificOndrej Mosnacek1-2/+4
Commit 56e8e57fc3a7 ("crypto: morus - Add common SIMD glue code for MORUS") accidetally consiedered the glue code to be usable by different architectures, but it seems to be only usable on x86. This patch moves it under arch/x86/crypto and adds 'depends on X86' to the Kconfig options and also removes the prompt to hide these internal options from the user. Reported-by: kbuild test robot <lkp@intel.com> Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-18crypto: x86 - Add optimized MORUS implementationsOndrej Mosnacek1-0/+26
This patch adds optimized implementations of MORUS-640 and MORUS-1280, utilizing the SSE2 and AVX2 x86 extensions. For MORUS-1280 (which operates on 256-bit blocks) we provide both AVX2 and SSE2 implementation. Although SSE2 MORUS-1280 is slower than AVX2 MORUS-1280, it is comparable in speed to the SSE2 MORUS-640. Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-18crypto: morus - Add common SIMD glue code for MORUSOndrej Mosnacek1-0/+16
This patch adds a common glue code for optimized implementations of MORUS AEAD algorithms. Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-18crypto: morus - Add generic MORUS AEAD implementationsOndrej Mosnacek1-0/+12
This patch adds the generic implementation of the MORUS family of AEAD algorithms (MORUS-640 and MORUS-1280). The original authors of MORUS are Hongjun Wu and Tao Huang. At the time of writing, MORUS is one of the finalists in CAESAR, an open competition intended to select a portfolio of alternatives to the problematic AES-GCM: https://competitions.cr.yp.to/caesar-submissions.html https://competitions.cr.yp.to/round3/morusv2.pdf Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-18crypto: x86 - Add optimized AEGIS implementationsOndrej Mosnacek1-0/+24
This patch adds optimized implementations of AEGIS-128, AEGIS-128L, and AEGIS-256, utilizing the AES-NI and SSE2 x86 extensions. Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-05-18crypto: aegis - Add generic AEGIS AEAD implementationsOndrej Mosnacek1-0/+21
This patch adds the generic implementation of the AEGIS family of AEAD algorithms (AEGIS-128, AEGIS-128L, and AEGIS-256). The original authors of AEGIS are Hongjun Wu and Bart Preneel. At the time of writing, AEGIS is one of the finalists in CAESAR, an open competition intended to select a portfolio of alternatives to the problematic AES-GCM: https://competitions.cr.yp.to/caesar-submissions.html https://competitions.cr.yp.to/round3/aegisv11.pdf Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-04-20crypto: zstd - Add zstd supportNick Terrell1-0/+9
Adds zstd support to crypto and scompress. Only supports the default level. Previously we held off on this patch, since there weren't any users. Now zram is ready for zstd support, but depends on CONFIG_CRYPTO_ZSTD, which isn't defined until this patch is in. I also see a patch adding zstd to pstore [0], which depends on crypto zstd. [0] lkml.kernel.org/r/9c9416b2dff19f05fb4c35879aaa83d11ff72c92.1521626182.git.geliangtang@gmail.com Signed-off-by: Nick Terrell <terrelln@fb.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-04-10Merge tag 'mips_4.17' of ↵Linus Torvalds1-0/+9
git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips Pull MIPS updates from James Hogan: "These are the main MIPS changes for 4.17. Rough overview: (1) generic platform: Add support for Microsemi Ocelot SoCs (2) crypto: Add CRC32 and CRC32C HW acceleration module (3) Various cleanups and misc improvements More detailed summary: Miscellaneous: - hang more efficiently on halt/powerdown/restart - pm-cps: Block system suspend when a JTAG probe is present - expand make help text for generic defconfigs - refactor handling of legacy defconfigs - determine the entry point from the ELF file header to fix microMIPS for certain toolchains - introduce isa-rev.h for MIPS_ISA_REV and use to simplify other code Minor cleanups: - DTS: boston/ci20: Unit name cleanups and correction - kdump: Make the default for PHYSICAL_START always 64-bit - constify gpio_led in Alchemy, AR7, and TXX9 - silence a couple of W=1 warnings - remove duplicate includes Platform support: Generic platform: - add support for Microsemi Ocelot - dt-bindings: Add vendor prefix for Microsemi Corporation - dt-bindings: Add bindings for Microsemi SoCs - add ocelot SoC & PCB123 board DTS files - MAINTAINERS: Add entry for Microsemi MIPS SoCs - enable crc32-mips on r6 configs ath79: - fix AR724X_PLL_REG_PCIE_CONFIG offset BCM47xx: - firmware: Use mac_pton() for MAC address parsing - add Luxul XAP1500/XWR1750 WiFi LEDs - use standard reset button for Luxul XWR-1750 BMIPS: - enable CONFIG_BRCMSTB_PM in bmips_stb_defconfig for build coverage - add STB PM, wake-up timer, watchdog DT nodes Octeon: - drop '.' after newlines in printk calls ralink: - pci-mt7621: Enable PCIe on MT7688" * tag 'mips_4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jhogan/mips: (37 commits) MIPS: BCM47XX: Use standard reset button for Luxul XWR-1750 MIPS: BCM47XX: Add Luxul XAP1500/XWR1750 WiFi LEDs MIPS: Make the default for PHYSICAL_START always 64-bit MIPS: Use the entry point from the ELF file header MAINTAINERS: Add entry for Microsemi MIPS SoCs MIPS: generic: Add support for Microsemi Ocelot MIPS: mscc: Add ocelot PCB123 device tree MIPS: mscc: Add ocelot dtsi dt-bindings: mips: Add bindings for Microsemi SoCs dt-bindings: Add vendor prefix for Microsemi Corporation MIPS: ath79: Fix AR724X_PLL_REG_PCIE_CONFIG offset MIPS: pci-mt7620: Enable PCIe on MT7688 MIPS: pm-cps: Block system suspend when a JTAG probe is present MIPS: VDSO: Replace __mips_isa_rev with MIPS_ISA_REV MIPS: BPF: Replace __mips_isa_rev with MIPS_ISA_REV MIPS: cpu-features.h: Replace __mips_isa_rev with MIPS_ISA_REV MIPS: Introduce isa-rev.h to define MIPS_ISA_REV MIPS: Hang more efficiently on halt/powerdown/restart FIRMWARE: bcm47xx_nvram: Replace mac address parsing MIPS: BMIPS: Add Broadcom STB watchdog nodes ...
2018-03-16crypto: sm4 - introduce SM4 symmetric cipher algorithmGilad Ben-Yossef1-0/+25
Introduce the SM4 cipher algorithms (OSCCA GB/T 32907-2016). SM4 (GBT.32907-2016) is a cryptographic standard issued by the Organization of State Commercial Administration of China (OSCCA) as an authorized cryptographic algorithms for the use within China. SMS4 was originally created for use in protecting wireless networks, and is mandated in the Chinese National Standard for Wireless LAN WAPI (Wired Authentication and Privacy Infrastructure) (GB.15629.11-2003). Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-09crypto: cfb - add support for Cipher FeedBack modeJames Bottomley1-0/+8
TPM security routines require encryption and decryption with AES in CFB mode, so add it to the Linux Crypto schemes. CFB is basically a one time pad where the pad is generated initially from the encrypted IV and then subsequently from the encrypted previous block of ciphertext. The pad is XOR'd into the plain text to get the final ciphertext. https://en.wikipedia.org/wiki/Block_cipher_mode_of_operation#CFB Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: ablk_helper - remove ablk_helperEric Biggers1-4/+0
All users of ablk_helper have been converted over to crypto_simd, so remove ablk_helper. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/camellia-aesni-avx, avx2 - convert to skcipher interfaceEric Biggers1-10/+3
Convert the AESNI AVX and AESNI AVX2 implementations of Camellia from the (deprecated) ablkcipher and blkcipher interfaces over to the skcipher interface. Note that this includes replacing the use of ablk_helper with crypto_simd. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/camellia - convert to skcipher interfaceEric Biggers1-1/+1
Convert the x86 asm implementation of Camellia from the (deprecated) blkcipher interface over to the skcipher interface. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/camellia - remove XTS algorithmEric Biggers1-1/+0
The XTS template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic XTS code themselves via xts_crypt(). Remove the xts-camellia-asm algorithm which did this. Users who request xts(camellia) and previously would have gotten xts-camellia-asm will now get xts(ecb-camellia-asm) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/camellia - remove LRW algorithmEric Biggers1-1/+0
The LRW template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic LRW code themselves via lrw_crypt(). Remove the lrw-camellia-asm algorithm which did this. Users who request lrw(camellia) and previously would have gotten lrw-camellia-asm will now get lrw(ecb-camellia-asm) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/camellia-aesni-avx2 - remove LRW algorithmEric Biggers1-1/+0
The LRW template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic LRW code themselves via lrw_crypt(). Remove the lrw-camellia-aesni-avx2 algorithm which did this. Users who request lrw(camellia) and previously would have gotten lrw-camellia-aesni-avx2 will now get lrw(ecb-camellia-aesni-avx2) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/camellia-aesni-avx - remove LRW algorithmEric Biggers1-1/+0
The LRW template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic LRW code themselves via lrw_crypt(). Remove the lrw-camellia-aesni algorithm which did this. Users who request lrw(camellia) and previously would have gotten lrw-camellia-aesni will now get lrw(ecb-camellia-aesni) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/des3_ede - convert to skcipher interfaceEric Biggers1-1/+1
Convert the x86 asm implementation of Triple DES from the (deprecated) blkcipher interface over to the skcipher interface. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/blowfish: convert to skcipher interfaceEric Biggers1-1/+1
Convert the x86 asm implementation of Blowfish from the (deprecated) blkcipher interface over to the skcipher interface. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/cast6-avx - convert to skcipher interfaceEric Biggers1-5/+4
Convert the AVX implementation of CAST6 from the (deprecated) ablkcipher and blkcipher interfaces over to the skcipher interface. Note that this includes replacing the use of ablk_helper with crypto_simd. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/cast6-avx - remove LRW algorithmEric Biggers1-1/+0
The LRW template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic LRW code themselves via lrw_crypt(). Remove the lrw-cast6-avx algorithm which did this. Users who request lrw(cast6) and previously would have gotten lrw-cast6-avx will now get lrw(ecb-cast6-avx) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/cast5-avx - convert to skcipher interfaceEric Biggers1-4/+3
Convert the AVX implementation of CAST5 from the (deprecated) ablkcipher and blkcipher interfaces over to the skcipher interface. Note that this includes replacing the use of ablk_helper with crypto_simd. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/twofish-avx - convert to skcipher interfaceEric Biggers1-4/+2
Convert the AVX implementation of Twofish from the (deprecated) ablkcipher and blkcipher interfaces over to the skcipher interface. Note that this includes replacing the use of ablk_helper with crypto_simd. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/twofish-avx - remove LRW algorithmEric Biggers1-1/+0
The LRW template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic LRW code themselves via lrw_crypt(). Remove the lrw-twofish-avx algorithm which did this. Users who request lrw(twofish) and previously would have gotten lrw-twofish-avx will now get lrw(ecb-twofish-avx) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/twofish-3way - convert to skcipher interfaceEric Biggers1-1/+1
Convert the 3-way implementation of Twofish from the (deprecated) blkcipher interface over to the skcipher interface. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/twofish-3way - remove XTS algorithmEric Biggers1-1/+0
The XTS template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic XTS code themselves via xts_crypt(). Remove the xts-twofish-3way algorithm which did this. Users who request xts(twofish) and previously would have gotten xts-twofish-3way will now get xts(ecb-twofish-3way) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/twofish-3way - remove LRW algorithmEric Biggers1-1/+0
The LRW template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic LRW code themselves via lrw_crypt(). Remove the lrw-twofish-3way algorithm which did this. Users who request lrw(twofish) and previously would have gotten lrw-twofish-3way will now get lrw(ecb-twofish-3way) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/serpent-avx,avx2 - convert to skcipher interfaceEric Biggers1-9/+2
Convert the AVX and AVX2 implementations of Serpent from the (deprecated) ablkcipher and blkcipher interfaces over to the skcipher interface. Note that this includes replacing the use of ablk_helper with crypto_simd. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/serpent-avx - remove LRW algorithmEric Biggers1-1/+0
The LRW template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic LRW code themselves via lrw_crypt(). Remove the lrw-serpent-avx algorithm which did this. Users who request lrw(serpent) and previously would have gotten lrw-serpent-avx will now get lrw(ecb-serpent-avx) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/serpent-avx2 - remove LRW algorithmEric Biggers1-1/+0
The LRW template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic LRW code themselves via lrw_crypt(). Remove the lrw-serpent-avx2 algorithm which did this. Users who request lrw(serpent) and previously would have gotten lrw-serpent-avx2 will now get lrw(ecb-serpent-avx2) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/serpent-sse2 - convert to skcipher interfaceEric Biggers1-6/+4
Convert the SSE2 implementation of Serpent from the (deprecated) ablkcipher and blkcipher interfaces over to the skcipher interface. Note that this includes replacing the use of ablk_helper with crypto_simd. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/serpent-sse2 - remove XTS algorithmEric Biggers1-2/+0
The XTS template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic XTS code themselves via xts_crypt(). Remove the xts-serpent-sse2 algorithm which did this. Users who request xts(serpent) and previously would have gotten xts-serpent-sse2 will now get xts(ecb-serpent-sse2) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-03-02crypto: x86/serpent-sse2 - remove LRW algorithmEric Biggers1-2/+0
The LRW template now wraps an ECB mode algorithm rather than the block cipher directly. Therefore it is now redundant for crypto modules to wrap their ECB code with generic LRW code themselves via lrw_crypt(). Remove the lrw-serpent-sse2 algorithm which did this. Users who request lrw(serpent) and previously would have gotten lrw-serpent-sse2 will now get lrw(ecb-serpent-sse2) instead, which is just as fast. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-22crypto: speck - add support for the Speck block cipherEric Biggers1-0/+14
Add a generic implementation of Speck, including the Speck128 and Speck64 variants. Speck is a lightweight block cipher that can be much faster than AES on processors that don't have AES instructions. We are planning to offer Speck-XTS (probably Speck128/256-XTS) as an option for dm-crypt and fscrypt on Android, for low-end mobile devices with older CPUs such as ARMv7 which don't have the Cryptography Extensions. Currently, such devices are unencrypted because AES is not fast enough, even when the NEON bit-sliced implementation of AES is used. Other AES alternatives such as Twofish, Threefish, Camellia, CAST6, and Serpent aren't fast enough either; it seems that only a modern ARX cipher can provide sufficient performance on these devices. This is a replacement for our original proposal (https://patchwork.kernel.org/patch/10101451/) which was to offer ChaCha20 for these devices. However, the use of a stream cipher for disk/file encryption with no space to store nonces would have been much more insecure than we thought initially, given that it would be used on top of flash storage as well as potentially on top of F2FS, neither of which is guaranteed to overwrite data in-place. Speck has been somewhat controversial due to its origin. Nevertheless, it has a straightforward design (it's an ARX cipher), and it appears to be the leading software-optimized lightweight block cipher currently, with the most cryptanalysis. It's also easy to implement without side channels, unlike AES. Moreover, we only intend Speck to be used when the status quo is no encryption, due to AES not being fast enough. We've also considered a novel length-preserving encryption mode based on ChaCha20 and Poly1305. While theoretically attractive, such a mode would be a brand new crypto construction and would be more complicated and difficult to implement efficiently in comparison to Speck-XTS. There is confusion about the byte and word orders of Speck, since the original paper doesn't specify them. But we have implemented it using the orders the authors recommended in a correspondence with them. The test vectors are taken from the original paper but were mapped to byte arrays using the recommended byte and word orders. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-02-19MIPS: crypto: Add crc32 and crc32c hw accelerated moduleMarcin Nowakowski1-0/+9
This module registers crc32 and crc32c algorithms that use the optional CRC32[bhwd] and CRC32C[bhwd] instructions in MIPSr6 cores. Signed-off-by: Marcin Nowakowski <marcin.nowakowski@mips.com> Signed-off-by: James Hogan <jhogan@kernel.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: linux-mips@linux-mips.org Cc: linux-crypto@vger.kernel.org Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Patchwork: https://patchwork.linux-mips.org/patch/18601/ [jhogan@kernel.org: Add CRYPTO_ALG_OPTIONAL_KEY flag on Eric Biggers' suggestion, due to commit a208fa8f3303 ("crypto: hash - annotate algorithms taking optional key") in v4.16-rc1]
2018-02-01Merge branch 'linus' of ↵Linus Torvalds1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "API: - Enforce the setting of keys for keyed aead/hash/skcipher algorithms. - Add multibuf speed tests in tcrypt. Algorithms: - Improve performance of sha3-generic. - Add native sha512 support on arm64. - Add v8.2 Crypto Extentions version of sha3/sm3 on arm64. - Avoid hmac nesting by requiring underlying algorithm to be unkeyed. - Add cryptd_max_cpu_qlen module parameter to cryptd. Drivers: - Add support for EIP97 engine in inside-secure. - Add inline IPsec support to chelsio. - Add RevB core support to crypto4xx. - Fix AEAD ICV check in crypto4xx. - Add stm32 crypto driver. - Add support for BCM63xx platforms in bcm2835 and remove bcm63xx. - Add Derived Key Protocol (DKP) support in caam. - Add Samsung Exynos True RNG driver. - Add support for Exynos5250+ SoCs in exynos PRNG driver" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (166 commits) crypto: picoxcell - Fix error handling in spacc_probe() crypto: arm64/sha512 - fix/improve new v8.2 Crypto Extensions code crypto: arm64/sm3 - new v8.2 Crypto Extensions implementation crypto: arm64/sha3 - new v8.2 Crypto Extensions implementation crypto: testmgr - add new testcases for sha3 crypto: sha3-generic - export init/update/final routines crypto: sha3-generic - simplify code crypto: sha3-generic - rewrite KECCAK transform to help the compiler optimize crypto: sha3-generic - fixes for alignment and big endian operation crypto: aesni - handle zero length dst buffer crypto: artpec6 - remove select on non-existing CRYPTO_SHA384 hwrng: bcm2835 - Remove redundant dev_err call in bcm2835_rng_probe() crypto: stm32 - remove redundant dev_err call in stm32_cryp_probe() crypto: axis - remove unnecessary platform_get_resource() error check crypto: testmgr - test misuse of result in ahash crypto: inside-secure - make function safexcel_try_push_requests static crypto: aes-generic - fix aes-generic regression on powerpc crypto: chelsio - Fix indentation warning crypto: arm64/sha1-ce - get rid of literal pool crypto: arm64/sha2-ce - move the round constant table to .rodata section ...
2018-01-12crypto: x86/salsa20 - cleanup and convert to skcipher APIEric Biggers1-0/+2
Convert salsa20-asm from the deprecated "blkcipher" API to the "skcipher" API, in the process fixing it up to use the generic helpers. This allows removing the salsa20_keysetup() and salsa20_ivsetup() assembly functions, which aren't performance critical; the C versions do just fine. This also fixes the same bug that salsa20-generic had, where the state array was being maintained directly in the transform context rather than on the stack or in the request context. Thus, if multiple threads used the same Salsa20 transform concurrently they produced the wrong results. Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2018-01-06crypto: scompress - use sgl_alloc() and sgl_free()Bart Van Assche1-0/+1
Use the sgl_alloc() and sgl_free() functions instead of open coding these functions. Signed-off-by: Bart Van Assche <bart.vanassche@wdc.com> Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Jens Axboe <axboe@kernel.dk>
2017-12-11crypto: ecdh - fix typo in KPP dependency of CRYPTO_ECDHHauke Mehrtens1-1/+1
This fixes a typo in the CRYPTO_KPP dependency of CRYPTO_ECDH. Fixes: 3c4b23901a0c ("crypto: ecdh - Add ECDH software support") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-11-14Merge branch 'linus' of ↵Linus Torvalds1-0/+11
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 Pull crypto updates from Herbert Xu: "Here is the crypto update for 4.15: API: - Disambiguate EBUSY when queueing crypto request by adding ENOSPC. This change touches code outside the crypto API. - Reset settings when empty string is written to rng_current. Algorithms: - Add OSCCA SM3 secure hash. Drivers: - Remove old mv_cesa driver (replaced by marvell/cesa). - Enable rfc3686/ecb/cfb/ofb AES in crypto4xx. - Add ccm/gcm AES in crypto4xx. - Add support for BCM7278 in iproc-rng200. - Add hash support on Exynos in s5p-sss. - Fix fallback-induced error in vmx. - Fix output IV in atmel-aes. - Fix empty GCM hash in mediatek. Others: - Fix DoS potential in lib/mpi. - Fix potential out-of-order issues with padata" * 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (162 commits) lib/mpi: call cond_resched() from mpi_powm() loop crypto: stm32/hash - Fix return issue on update crypto: dh - Remove pointless checks for NULL 'p' and 'g' crypto: qat - Clean up error handling in qat_dh_set_secret() crypto: dh - Don't permit 'key' or 'g' size longer than 'p' crypto: dh - Don't permit 'p' to be 0 crypto: dh - Fix double free of ctx->p hwrng: iproc-rng200 - Add support for BCM7278 dt-bindings: rng: Document BCM7278 RNG200 compatible crypto: chcr - Replace _manual_ swap with swap macro crypto: marvell - Add a NULL entry at the end of mv_cesa_plat_id_table[] hwrng: virtio - Virtio RNG devices need to be re-registered after suspend/resume crypto: atmel - remove empty functions crypto: ecdh - remove empty exit() MAINTAINERS: update maintainer for qat crypto: caam - remove unused param of ctx_map_to_sec4_sg() crypto: caam - remove unneeded edesc zeroization crypto: atmel-aes - Reset the controller before each use crypto: atmel-aes - properly set IV after {en,de}crypt hwrng: core - Reset user selected rng by writing "" to rng_current ...
2017-11-02License cleanup: add SPDX GPL-2.0 license identifier to files with no licenseGreg Kroah-Hartman1-0/+1
Many source files in the tree are missing licensing information, which makes it harder for compliance tools to determine the correct license. By default all files without license information are under the default license of the kernel, which is GPL version 2. Update the files which contain no license information with the 'GPL-2.0' SPDX license identifier. The SPDX identifier is a legally binding shorthand, which can be used instead of the full boiler plate text. This patch is based on work done by Thomas Gleixner and Kate Stewart and Philippe Ombredanne. How this work was done: Patches were generated and checked against linux-4.14-rc6 for a subset of the use cases: - file had no licensing information it it. - file was a */uapi/* one with no licensing information in it, - file was a */uapi/* one with existing licensing information, Further patches will be generated in subsequent months to fix up cases where non-standard license headers were used, and references to license had to be inferred by heuristics based on keywords. The analysis to determine which SPDX License Identifier to be applied to a file was done in a spreadsheet of side by side results from of the output of two independent scanners (ScanCode & Windriver) producing SPDX tag:value files created by Philippe Ombredanne. Philippe prepared the base worksheet, and did an initial spot review of a few 1000 files. The 4.13 kernel was the starting point of the analysis with 60,537 files assessed. Kate Stewart did a file by file comparison of the scanner results in the spreadsheet to determine which SPDX license identifier(s) to be applied to the file. She confirmed any determination that was not immediately clear with lawyers working with the Linux Foundation. Criteria used to select files for SPDX license identifier tagging was: - Files considered eligible had to be source code files. - Make and config files were included as candidates if they contained >5 lines of source - File already had some variant of a license header in it (even if <5 lines). All documentation files were explicitly excluded. The following heuristics were used to determine which SPDX license identifiers to apply. - when both scanners couldn't find any license traces, file was considered to have no license information in it, and the top level COPYING file license applied. For non */uapi/* files that summary was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 11139 and resulted in the first patch in this series. If that file was a */uapi/* path one, it was "GPL-2.0 WITH Linux-syscall-note" otherwise it was "GPL-2.0". Results of that was: SPDX license identifier # files ---------------------------------------------------|------- GPL-2.0 WITH Linux-syscall-note 930 and resulted in the second patch in this series. - if a file had some form of licensing information in it, and was one of the */uapi/* ones, it was denoted with the Linux-syscall-note if any GPL family license was found in the file or had no licensing in it (per prior point). Results summary: SPDX license identifier # files ---------------------------------------------------|------ GPL-2.0 WITH Linux-syscall-note 270 GPL-2.0+ WITH Linux-syscall-note 169 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-2-Clause) 21 ((GPL-2.0 WITH Linux-syscall-note) OR BSD-3-Clause) 17 LGPL-2.1+ WITH Linux-syscall-note 15 GPL-1.0+ WITH Linux-syscall-note 14 ((GPL-2.0+ WITH Linux-syscall-note) OR BSD-3-Clause) 5 LGPL-2.0+ WITH Linux-syscall-note 4 LGPL-2.1 WITH Linux-syscall-note 3 ((GPL-2.0 WITH Linux-syscall-note) OR MIT) 3 ((GPL-2.0 WITH Linux-syscall-note) AND MIT) 1 and that resulted in the third patch in this series. - when the two scanners agreed on the detected license(s), that became the concluded license(s). - when there was disagreement between the two scanners (one detected a license but the other didn't, or they both detected different licenses) a manual inspection of the file occurred. - In most cases a manual inspection of the information in the file resulted in a clear resolution of the license that should apply (and which scanner probably needed to revisit its heuristics). - When it was not immediately clear, the license identifier was confirmed with lawyers working with the Linux Foundation. - If there was any question as to the appropriate license identifier, the file was flagged for further research and to be revisited later in time. In total, over 70 hours of logged manual review was done on the spreadsheet to determine the SPDX license identifiers to apply to the source files by Kate, Philippe, Thomas and, in some cases, confirmation by lawyers working with the Linux Foundation. Kate also obtained a third independent scan of the 4.13 code base from FOSSology, and compared selected files where the other two scanners disagreed against that SPDX file, to see if there was new insights. The Windriver scanner is based on an older version of FOSSology in part, so they are related. Thomas did random spot checks in about 500 files from the spreadsheets for the uapi headers and agreed with SPDX license identifier in the files he inspected. For the non-uapi files Thomas did random spot checks in about 15000 files. In initial set of patches against 4.14-rc6, 3 files were found to have copy/paste license identifier errors, and have been fixed to reflect the correct identifier. Additionally Philippe spent 10 hours this week doing a detailed manual inspection and review of the 12,461 patched files from the initial patch version early this week with: - a full scancode scan run, collecting the matched texts, detected license ids and scores - reviewing anything where there was a license detected (about 500+ files) to ensure that the applied SPDX license was correct - reviewing anything where there was no detection but the patch license was not GPL-2.0 WITH Linux-syscall-note to ensure that the applied SPDX license was correct This produced a worksheet with 20 files needing minor correction. This worksheet was then exported into 3 different .csv files for the different types of files to be modified. These .csv files were then reviewed by Greg. Thomas wrote a script to parse the csv files and add the proper SPDX tag to the file, in the format that the file expected. This script was further refined by Greg based on the output to detect more types of files automatically and to distinguish between header and source .c files (which need different comment types.) Finally Greg ran the script using the .csv files to generate the patches. Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Philippe Ombredanne <pombredanne@nexb.com> Reviewed-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-09-22crypto: sm3 - add OSCCA SM3 secure hashGilad Ben-Yossef1-0/+11
Add OSCCA SM3 secure hash (OSCCA GM/T 0004-2012 SM3) generic hash transformation. Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-08-09crypto: algif_aead - copy AAD from src to dstStephan Mueller1-0/+2
Use the NULL cipher to copy the AAD and PT/CT from the TX SGL to the RX SGL. This allows an in-place crypto operation on the RX SGL for encryption, because the TX data is always smaller or equal to the RX data (the RX data will hold the tag). For decryption, a per-request TX SGL is created which will only hold the tag value. As the RX SGL will have no space for the tag value and an in-place operation will not write the tag buffer, the TX SGL with the tag value is chained to the RX SGL. This now allows an in-place crypto operation. For example: * without the patch: kcapi -x 2 -e -c "gcm(aes)" -p 89154d0d4129d322e4487bafaa4f6b46 -k c0ece3e63198af382b5603331cc23fa8 -i 7e489b83622e7228314d878d -a afcd7202d621e06ca53b70c2bdff7fb2 -l 16 -u -s 00000000000000000000000000000000f4a3eacfbdadd3b1a17117b1d67ffc1f1e21efbbc6d83724a8c296e3bb8cda0c * with the patch: kcapi -x 2 -e -c "gcm(aes)" -p 89154d0d4129d322e4487bafaa4f6b46 -k c0ece3e63198af382b5603331cc23fa8 -i 7e489b83622e7228314d878d -a afcd7202d621e06ca53b70c2bdff7fb2 -l 16 -u -s afcd7202d621e06ca53b70c2bdff7fb2f4a3eacfbdadd3b1a17117b1d67ffc1f1e21efbbc6d83724a8c296e3bb8cda0c Tests covering this functionality have been added to libkcapi. Signed-off-by: Stephan Mueller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-06-10crypto: ecdh - add privkey generation supportTudor-Dan Ambarus1-0/+1
Add support for generating ecc private keys. Generation of ecc private keys is helpful in a user-space to kernel ecdh offload because the keys are not revealed to user-space. Private key generation is also helpful to implement forward secrecy. If the user provides a NULL ecc private key, the kernel will generate it and further use it for ecdh. Move ecdh's object files below drbg's. drbg must be present in the kernel at the time of calling. Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com> Reviewed-by: Stephan Müller <smueller@chronox.de> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-04-05crypto: xts - drop gf128mul dependencyOndrej Mosnáček1-1/+0
Since the gf128mul_x_ble function used by xts.c is now defined inline in the header file, the XTS module no longer depends on gf128mul. Therefore, the 'select CRYPTO_GF128MUL' line can be safely removed. Signed-off-by: Ondrej Mosnacek <omosnacek@gmail.com> Reviewd-by: Eric Biggers <ebiggers@google.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24crypto: powerpc - Stress test for vpmsum implementationsDaniel Axtens1-0/+8
vpmsum implementations often don't kick in for short test vectors. This is a simple test module that does a configurable number of random tests, each up to 64kB and each with random offsets. Both CRC-T10DIF and CRC32C are tested. Cc: Anton Blanchard <anton@samba.org> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-03-24crypto: powerpc - Add CRC-T10DIF accelerationDaniel Axtens1-0/+9
T10DIF is a CRC16 used heavily in NVMe. It turns out we can accelerate it with a CRC32 library and a few little tricks. Provide the accelerator based the refactored CRC32 code. Cc: Anton Blanchard <anton@samba.org> Thanks-to: Hong Bo Peng <penghb@cn.ibm.com> Signed-off-by: Daniel Axtens <dja@axtens.net> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-23crypto: xts - Add ECB dependencyMilan Broz1-0/+1
Since the commit f1c131b45410a202eb45cc55980a7a9e4e4b4f40 crypto: xts - Convert to skcipher the XTS mode is based on ECB, so the mode must select ECB otherwise it can fail to initialize. Signed-off-by: Milan Broz <gmazyland@gmail.com> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2017-02-11crypto: ccm - switch to separate cbcmac driverArd Biesheuvel1-0/+1
Update the generic CCM driver to defer CBC-MAC processing to a dedicated CBC-MAC ahash transform rather than open coding this transform (and much of the associated scatterwalk plumbing) in the CCM driver itself. This cleans up the code considerably, but more importantly, it allows the use of alternative CBC-MAC implementations that don't suffer from performance degradation due to significant setup time (e.g., the NEON based AES code needs to enable/disable the NEON, and load the S-box into 16 SIMD registers, which cannot be amortized over the entire input when using the cipher interface) Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>