summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2021-09-22ARM: dts: imx: Fix USB host power regulator polarity on M53MenloMarek Vasut1-2/+1
The MIC2025 switch input signal nEN is active low, describe it as such in the DT. The previous change to this regulator polarity was incorrectly influenced by broken quirks in gpiolib-of.c, which is now long fixed. So fix this regulator polarity setting here once and for all. Fixes: 3c3601cd6a6d3 ("ARM: dts: imx53: Update USB configuration on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: imx: Add missing pinctrl-names for panel on M53MenloMarek Vasut1-0/+1
The panel already contains pinctrl-0 phandle, but it is missing the default pinctrl-names property, so the pin configuration is ignored. Fill in the missing pinctrl-names property, so the pin configuration is applied. Fixes: d81765d693db6 ("ARM: dts: imx53: Update LCD panel node on M53Menlo") Signed-off-by: Marek Vasut <marex@denx.de> Cc: Shawn Guo <shawnguo@kernel.org> Cc: Fabio Estevam <festevam@gmail.com> Cc: NXP Linux Team <linux-imx@nxp.com> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22Revert "ARM: imx6q: drop of_platform_default_populate() from init_machine"Fabio Estevam1-0/+3
This reverts commit cc8870bf4c3ab0af385538460500a9d342ed945f. Since commit cc8870bf4c3a ("ARM: imx6q: drop of_platform_default_populate() from init_machine") the following errors are seen on boot: [ 0.123372] imx6q_suspend_init: failed to find ocram device! [ 0.123537] imx6_pm_common_init: No DDR LPM support with suspend -19! , which break suspend/resume on imx6q/dl. Revert the offeding commit to avoid the regression. Thanks to Tim Harvey for bisecting this problem. Cc: stable@vger.kernel.org Fixes: cc8870bf4c3a ("ARM: imx6q: drop of_platform_default_populate() from init_machine") Signed-off-by: Fabio Estevam <festevam@gmail.com> Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22ARM: dts: aspeed: Add ADC for AST2600 and enable for Rainier and EverestEddie James3-0/+50
Add the ADC nodes to the AST2600 devicetree. Enable ADC1 for Rainier and Everest systems and add an iio-hwmon node for the 7th channel to report the battery voltage. Tested on Rainier: ~# cat /sys/class/hwmon/hwmon11/in1_input 1347 Signed-off-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210916210045.31769-1-eajames@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: everest: Define name for gpio line B6Ben Tyner1-1/+1
gpio-line-names B6 set to checkstop Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-4-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: everest: Define name for gpio line Q2Ben Tyner1-1/+1
gpio-line-names Q2 set to regulator-standby-faulted Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-3-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: rainier: Define name for gpio line Q2Ben Tyner1-1/+1
gpio-line-names Q2 set to regulator-standby-faulted Signed-off-by: Ben Tyner <ben.tyner@ibm.com> Reviewed-by: Eddie James <eajames@linux.ibm.com> Link: https://lore.kernel.org/r/20210920150549.6431-2-bentyner@linux.ibm.com Signed-off-by: Joel Stanley <joel@jms.id.au>
2021-09-22ARM: dts: imx6dl-yapp4: Fix lp5562 LED driver probeMichal Vokáč1-0/+5
Since the LED multicolor framework support was added in commit 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") LEDs on this platform stopped working. Author of the framework attempted to accommodate this DT to the framework in commit b86d3d21cd4c ("ARM: dts: imx6dl-yapp4: Add reg property to the lp5562 channel node") but that is not sufficient. A color property is now required even if the multicolor framework is not used, otherwise the driver probe fails: lp5562: probe of 1-0030 failed with error -22 Add the color property to fix this. Fixes: 92a81562e695 ("leds: lp55xx: Add multicolor framework support to lp55xx") Cc: <stable@vger.kernel.org> Cc: linux-leds@vger.kernel.org Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com> Acked-by: Pavel Machek <pavel@ucw.cz> Reviewed-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Shawn Guo <shawnguo@kernel.org>
2021-09-22s390/qeth: fix deadlock during failing recoveryAlexandra Winter1-1/+1
Commit 0b9902c1fcc5 ("s390/qeth: fix deadlock during recovery") removed taking discipline_mutex inside qeth_do_reset(), fixing potential deadlocks. An error path was missed though, that still takes discipline_mutex and thus has the original deadlock potential. Intermittent deadlocks were seen when a qeth channel path is configured offline, causing a race between qeth_do_reset and ccwgroup_remove. Call qeth_set_offline() directly in the qeth_do_reset() error case and then a new variant of ccwgroup_set_offline(), without taking discipline_mutex. Fixes: b41b554c1ee7 ("s390/qeth: fix locking for discipline setup / removal") Signed-off-by: Alexandra Winter <wintera@linux.ibm.com> Reviewed-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2021-09-21Merge tag 's390-5.15-ebpf-jit-fixes' of ↵Linus Torvalds1-32/+38
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 eBPF fixes from Vasily Gorbik: "Johan Almbladh has implemented a number of new testcases for eBPF [1], which uncovered three miscompilation issues in the s390 eBPF JIT" Link: https://lore.kernel.org/bpf/20210902185229.1840281-1-johan.almbladh@anyfinetworks.com/ [1] * tag 's390-5.15-ebpf-jit-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/bpf: Fix optimizing out zero-extensions s390/bpf: Fix 64-bit subtraction of the -0x80000000 constant s390/bpf: Fix branch shortening during codegen pass
2021-09-21arm64: Mitigate MTE issues with str{n}cmp()Robin Murphy4-2/+9
As with strlen(), the patches importing the updated str{n}cmp() implementations were originally developed and tested before the advent of CONFIG_KASAN_HW_TAGS, and have subsequently revealed not to be MTE-safe. Since in-kernel MTE is still a rather niche case, let it temporarily fall back to the generic C versions for correctness until we can figure out the best fix. Fixes: 758602c04409 ("arm64: Import latest version of Cortex Strings' strcmp") Fixes: 020b199bc70d ("arm64: Import latest version of Cortex Strings' strncmp") Cc: <stable@vger.kernel.org> # 5.14.x Reported-by: Branislav Rankov <branislav.rankov@arm.com> Signed-off-by: Robin Murphy <robin.murphy@arm.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/34dc4d12eec0adae49b0ac927df642ed10089d40.1631890770.git.robin.murphy@arm.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-09-21arm64: add MTE supported check to thread switching and syscall entry/exitPeter Collingbourne2-6/+10
This lets us avoid doing unnecessary work on hardware that does not support MTE, and will allow us to freely use MTE instructions in the code called by mte_thread_switch(). Since this would mean that we do a redundant check in mte_check_tfsr_el1(), remove it and add two checks now required in its callers. This also avoids an unnecessary DSB+ISB sequence on the syscall exit path for hardware not supporting MTE. Fixes: 65812c6921cc ("arm64: mte: Enable async tag check fault") Cc: <stable@vger.kernel.org> # 5.13.x Signed-off-by: Peter Collingbourne <pcc@google.com> Link: https://linux-review.googlesource.com/id/I02fd000d1ef2c86c7d2952a7f099b254ec227a5d Link: https://lore.kernel.org/r/20210915190336.398390-1-pcc@google.com [catalin.marinas@arm.com: adjust the commit log slightly] Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-09-21x86/setup: Call early_reserve_memory() earlierJuergen Gross1-12/+14
Commit in Fixes introduced early_reserve_memory() to do all needed initial memblock_reserve() calls in one function. Unfortunately, the call of early_reserve_memory() is done too late for Xen dom0, as in some cases a Xen hook called by e820__memory_setup() will need those memory reservations to have happened already. Move the call of early_reserve_memory() before the call of e820__memory_setup() in order to avoid such problems. Fixes: a799c2bd29d1 ("x86/setup: Consolidate early memory reservations") Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Signed-off-by: Juergen Gross <jgross@suse.com> Signed-off-by: Borislav Petkov <bp@suse.de> Tested-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com> Tested-by: Nathan Chancellor <nathan@kernel.org> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20210920120421.29276-1-jgross@suse.com
2021-09-21xen/x86: fix PV trap handling on secondary processorsJan Beulich1-6/+9
The initial observation was that in PV mode under Xen 32-bit user space didn't work anymore. Attempts of system calls ended in #GP(0x402). All of the sudden the vector 0x80 handler was not in place anymore. As it turns out up to 5.13 redundant initialization did occur: Once from cpu_initialize_context() (through its VCPUOP_initialise hypercall) and a 2nd time while each CPU was brought fully up. This 2nd initialization is now gone, uncovering that the 1st one was flawed: Unlike for the set_trap_table hypercall, a full virtual IDT needs to be specified here; the "vector" fields of the individual entries are of no interest. With many (kernel) IDT entries still(?) (i.e. at that point at least) empty, the syscall vector 0x80 ended up in slot 0x20 of the virtual IDT, thus becoming the domain's handler for vector 0x20. Make xen_convert_trap_info() fit for either purpose, leveraging the fact that on the xen_copy_trap_info() path the table starts out zero-filled. This includes moving out the writing of the sentinel, which would also have lead to a buffer overrun in the xen_copy_trap_info() case if all (kernel) IDT entries were populated. Convert the writing of the sentinel to clearing of the entire table entry rather than just the address field. (I didn't bother trying to identify the commit which uncovered the issue in 5.14; the commit named below is the one which actually introduced the bad code.) Fixes: f87e4cac4f4e ("xen: SMP guest support") Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com> Link: https://lore.kernel.org/r/7a266932-092e-b68f-f2bb-1473b61adc6e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20x86/fault: Fix wrong signal when vsyscall fails with pkeyJiashuo Liang2-10/+18
The function __bad_area_nosemaphore() calls kernelmode_fixup_or_oops() with the parameter @signal being actually @pkey, which will send a signal numbered with the argument in @pkey. This bug can be triggered when the kernel fails to access user-given memory pages that are protected by a pkey, so it can go down the do_user_addr_fault() path and pass the !user_mode() check in __bad_area_nosemaphore(). Most cases will simply run the kernel fixup code to make an -EFAULT. But when another condition current->thread.sig_on_uaccess_err is met, which is only used to emulate vsyscall, the kernel will generate the wrong signal. Add a new parameter @pkey to kernelmode_fixup_or_oops() to fix this. [ bp: Massage commit message, fix build error as reported by the 0day bot: https://lkml.kernel.org/r/202109202245.APvuT8BX-lkp@intel.com ] Fixes: 5042d40a264c ("x86/fault: Bypass no_context() for implicit kernel faults from usermode") Reported-by: kernel test robot <lkp@intel.com> Signed-off-by: Jiashuo Liang <liangjs@pku.edu.cn> Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dave Hansen <dave.hansen@linux.intel.com> Link: https://lkml.kernel.org/r/20210730030152.249106-1-liangjs@pku.edu.cn
2021-09-20sparc64: fix pci_iounmap() when CONFIG_PCI is not setLinus Torvalds1-0/+2
Guenter reported [1] that the pci_iounmap() changes remain problematic, with sparc64 allnoconfig and tinyconfig still not building due to the header file changes and confusion with the arch-specific pci_iounmap() implementation. I'm pretty convinced that sparc should just use GENERIC_IOMAP instead of doing its own thing, since it turns out that the sparc64 version of pci_iounmap() is somewhat buggy (see [2]). But in the meantime, this just fixes the build by avoiding the trivial re-definition of the empty case. Link: https://lore.kernel.org/lkml/20210920134424.GA346531@roeck-us.net/ [1] Link: https://lore.kernel.org/lkml/CAHk-=wgheheFx9myQyy5osh79BAazvmvYURAtub2gQtMvLrhqQ@mail.gmail.com/ [2] Reported-by: Guenter Roeck <linux@roeck-us.net> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-20swiotlb-xen: this is PV-only on x86Jan Beulich1-1/+0
The code is unreachable for HVM or PVH, and it also makes little sense in auto-translated environments. On Arm, with xen_{create,destroy}_contiguous_region() both being stubs, I have a hard time seeing what good the Xen specific variant does - the generic one ought to be fine for all purposes there. Still Arm code explicitly references symbols here, so the code will continue to be included there. Instead of making PCI_XEN's "select" conditional, simply drop it - SWIOTLB_XEN will be available unconditionally in the PV case anyway, and is - as explained above - dead code in non-PV environments. This in turn allows dropping the stubs for xen_{create,destroy}_contiguous_region(), the former of which was broken anyway - it failed to set the DMA handle output. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Link: https://lore.kernel.org/r/5947b8ae-fdc7-225c-4838-84712265fc1e@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20xen/pci-swiotlb: reduce visibility of symbolsJan Beulich2-7/+3
xen_swiotlb and pci_xen_swiotlb_init() are only used within the file defining them, so make them static and remove the stubs. Otoh pci_xen_swiotlb_detect() has a use (as function pointer) from the main pci-swiotlb.c file - convert its stub to a #define to NULL. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Christoph Hellwig <hch@lst.de> Link: https://lore.kernel.org/r/aef5fc33-9c02-4df0-906a-5c813142e13c@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20xen/x86: drop redundant zeroing from cpu_initialize_context()Jan Beulich1-4/+0
Just after having obtained the pointer from kzalloc() there's no reason at all to set part of the area to all zero yet another time. Similarly there's no point explicitly clearing "ldt_ents". Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Boris Ostrovsky <boris.ostrvsky@oracle.com> Link: https://lore.kernel.org/r/14881835-a48e-29fa-0870-e177b10fcf65@suse.com Signed-off-by: Juergen Gross <jgross@suse.com>
2021-09-20KVM: arm64: Fix PMU probe orderingMarc Zyngier2-4/+8
Russell reported that since 5.13, KVM's probing of the PMU has started to fail on his HW. As it turns out, there is an implicit ordering dependency between the architectural PMU probing code and and KVM's own probing. If, due to probe ordering reasons, KVM probes before the PMU driver, it will fail to detect the PMU and prevent it from being advertised to guests as well as the VMM. Obviously, this is one probing too many, and we should be able to deal with any ordering. Add a callback from the PMU code into KVM to advertise the registration of a host CPU PMU, allowing for any probing order. Fixes: 5421db1be3b1 ("KVM: arm64: Divorce the perf code from oprofile helpers") Reported-by: "Russell King (Oracle)" <linux@armlinux.org.uk> Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/YUYRKVflRtUytzy5@shell.armlinux.org.uk Cc: stable@vger.kernel.org
2021-09-20KVM: arm64: nvhe: Fix missing FORCE for hyp-reloc.S build ruleZenghui Yu1-1/+1
Add FORCE so that if_changed can detect the command line change. We'll otherwise see a compilation warning since commit e1f86d7b4b2a ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk"). arch/arm64/kvm/hyp/nvhe/Makefile:58: FORCE prerequisite is missing Cc: David Brazdil <dbrazdil@google.com> Cc: Masahiro Yamada <masahiroy@kernel.org> Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20210907052137.1059-1-yuzenghui@huawei.com
2021-09-20arm64: dts: qcom: sc7180-trogdor: Fix lpass dai link for HDMIStephen Boyd1-5/+4
This should be the dai for display port. Without this set properly we fail to get audio routed through external displays on trogdor. It looks like we picked up v4[1] of this patch when there was a v7[2]. The v7 patch still had the wrong sound-dai but at least we can fix all this up and audio works. Cc: Srinivasa Rao Mandadapu <srivasam@qti.qualcomm.com> Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org> Cc: Douglas Anderson <dianders@chromium.org> Fixes: b22d313e1772 ("arm64: dts: qcom: sc7180-trogdor: Add lpass dai link for HDMI") Link: https://lore.kernel.org/r/20210721080549.28822-3-srivasam@qti.qualcomm.com [1] Link: https://lore.kernel.org/r/20210726120910.20335-3-srivasam@codeaurora.org [2] Signed-off-by: Stephen Boyd <swboyd@chromium.org> Reviewed-by: Douglas Anderson <dianders@chromium.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210811224141.1110495-1-swboyd@chromium.org
2021-09-20ARM: dts: qcom: apq8064: update Adreno clock namesDavid Heidelberg1-4/+4
The legacy clock names (including the _clk suffix) was dropped from the driver, so update the dts accordingly). Tested on Nexus 7 2013, no functional changes. Signed-off-by: David Heidelberg <david@ixit.cz> [bjorn: Updated commit message] Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210829133918.57780-2-david@ixit.cz
2021-09-20arm64: dts: qcom: sdm850-yoga: Reshuffle IPA memory mappingsAmit Pundir2-8/+47
Upstream commit 2e01e0c21459 ("arm64: dts: qcom: sdm850-yoga: Enable IPA") shuffled reserved memory regions in sdm845.dtsi to make firmware loading succeed and enable the ipa device on sdm845-yoga but it broke the other common users of those memory regions like Xiaomi Pocophone F1. So this patch effectively revert those upstream commit changes and move all the relevant changes to sdm850-lenovo-yoga-c630.dts instead. Fixes: 2e01e0c21459 ("arm64: dts: qcom: sdm850-yoga: Enable IPA") Signed-off-by: Amit Pundir <amit.pundir@linaro.org> Tested-by: Steev Klimaszewski <steev@kali.org> Tested-by: Bjorn Andersson <bjorn.andersson@linaro.org> Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org> Link: https://lore.kernel.org/r/20210916200554.2434439-1-amit.pundir@linaro.org
2021-09-19Merge tag 'x86_urgent_for_v5.15_rc2' of ↵Linus Torvalds4-15/+46
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Borislav Petkov: - Prevent a infinite loop in the MCE recovery on return to user space, which was caused by a second MCE queueing work for the same page and thereby creating a circular work list. - Make kern_addr_valid() handle existing PMD entries, which are marked not present in the higher level page table, correctly instead of blindly dereferencing them. - Pass a valid address to sanitize_phys(). This was caused by the mixture of inclusive and exclusive ranges. memtype_reserve() expect 'end' being exclusive, but sanitize_phys() wants it inclusive. This worked so far, but with end being the end of the physical address space the fail is exposed. - Increase the maximum supported GPIO numbers for 64bit. Newer SoCs exceed the previous maximum. * tag 'x86_urgent_for_v5.15_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Avoid infinite loop for copy from user recovery x86/mm: Fix kern_addr_valid() to cope with existing but not present entries x86/platform: Increase maximum GPIO number for X86_64 x86/pat: Pass valid address to sanitize_phys()
2021-09-19Merge tag 'powerpc-5.15-2' of ↵Linus Torvalds5-47/+94
git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux Pull powerpc fixes from Michael Ellerman: - Fix crashes when scv (System Call Vectored) is used to make a syscall when a transaction is active, on Power9 or later. - Fix bad interactions between rfscv (Return-from scv) and Power9 fake-suspend mode. - Fix crashes when handling machine checks in LPARs using the Hash MMU. - Partly revert a recent change to our XICS interrupt controller code, which broke the recently added Microwatt support. Thanks to Cédric Le Goater, Eirik Fuller, Ganesh Goudar, Gustavo Romero, Joel Stanley, Nicholas Piggin. * tag 'powerpc-5.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux: powerpc/xics: Set the IRQ chip data for the ICS native backend powerpc/mce: Fix access error in mce handler KVM: PPC: Book3S HV: Tolerate treclaim. in fake-suspend mode changing registers powerpc/64s: system call rfscv workaround for TM bugs selftests/powerpc: Add scv versions of the basic TM syscall tests powerpc/64s: system call scv tabort fix for corrupt irq soft-mask state
2021-09-19Merge tag 'kbuild-fixes-v5.15' of ↵Linus Torvalds2-11/+17
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull Kbuild fixes from Masahiro Yamada: - Fix bugs in checkkconfigsymbols.py - Fix missing sys import in gen_compile_commands.py - Fix missing FORCE warning for ARCH=sh builds - Fix -Wignored-optimization-argument warnings for Clang builds - Turn -Wignored-optimization-argument into an error in order to stop building instead of sprinkling warnings * tag 'kbuild-fixes-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: kbuild: Add -Werror=ignored-optimization-argument to CLANG_FLAGS x86/build: Do not add -falign flags unconditionally for clang kbuild: Fix comment typo in scripts/Makefile.modpost sh: Add missing FORCE prerequisites in Makefile gen_compile_commands: fix missing 'sys' package checkkconfigsymbols.py: Remove skipping of help lines in parse_kconfig_file checkkconfigsymbols.py: Forbid passing 'HEAD' to --commit
2021-09-19alpha: enable GENERIC_PCI_IOMAP unconditionallyLinus Torvalds1-1/+1
With the previous commit (9caea0007601: "parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabled") we can now enable GENERIC_PCI_IOMAP unconditionally on alpha, and if PCI is not enabled we will just get the nice empty helper functions that allow mixed-bus drivers to build. Example driver: the old 3com/3c59x.c driver works with either the PCI or the EISA version of the 3x59x card, but wouldn't build in an EISA-only configuration because of missing pci_iomap() and pci_iounmap() dummy wrappers. Most of the other PCI infrastructure just becomes empty wrappers even without GENERIC_PCI_IOMAP, and it's not obvious that the pci_iomap functionality shouldn't do the same, but this works. Cc: Ulrich Teichert <krypton@ulrich-teichert.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-19parisc: Declare pci_iounmap() parisc version only when CONFIG_PCI enabledHelge Deller1-1/+3
Linus noticed odd declaration rules for pci_iounmap() in iomap.h and pci_iomap.h, where it dependend on either NO_GENERIC_PCI_IOPORT_MAP or GENERIC_IOMAP when CONFIG_PCI was disabled. Testing on parisc seems to indicate that we need pci_iounmap() only when CONFIG_PCI is enabled, so the declaration of pci_iounmap() can be moved cleanly into pci_iomap.h in sync with the declarations of pci_iomap(). Link: https://lore.kernel.org/all/CAHk-=wjRrh98pZoQ+AzfWmsTZacWxTJKXZ9eKU2X_0+jM=O8nw@mail.gmail.com/ Signed-off-by: Helge Deller <deller@gmx.de> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Fixes: 97a29d59fc22 ("[PARISC] fix compile break caused by iomap: make IOPORT/PCI mapping functions conditional") Cc: Arnd Bergmann <arnd@arndb.de> Cc: Guenter Roeck <linux@roeck-us.net> Cc: Ulrich Teichert <krypton@ulrich-teichert.org> Cc: James Bottomley <James.Bottomley@hansenpartnership.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-19x86/build: Do not add -falign flags unconditionally for clangNathan Chancellor1-3/+9
clang does not support -falign-jumps and only recently gained support for -falign-loops. When one of the configuration options that adds these flags is enabled, clang warns and all cc-{disable-warning,option} that follow fail because -Werror gets added to test for the presence of this warning: clang-14: warning: optimization flag '-falign-jumps=0' is not supported [-Wignored-optimization-argument] To resolve this, add a couple of cc-option calls when building with clang; gcc has supported these options since 3.2 so there is no point in testing for their support. -falign-functions was implemented in clang-7, -falign-loops was implemented in clang-14, and -falign-jumps has not been implemented yet. Link: https://lore.kernel.org/r/YSQE2f5teuvKLkON@Ryzen-9-3900X.localdomain/ Link: https://lore.kernel.org/r/20210824022640.2170859-2-nathan@kernel.org/ Reported-by: kernel test robot <lkp@intel.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> Acked-by: Borislav Petkov <bp@suse.de> Signed-off-by: Nathan Chancellor <nathan@kernel.org> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-09-19sh: Add missing FORCE prerequisites in MakefileGeert Uytterhoeven1-8/+8
make: arch/sh/boot/Makefile:87: FORCE prerequisite is missing Add the missing FORCE prerequisites for all build targets identified by "make help". Fixes: e1f86d7b4b2a5213 ("kbuild: warn if FORCE is missing for if_changed(_dep,_rule) and filechk") Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2021-09-19alpha: move __udiv_qrnnd library function to arch/alpha/lib/Linus Torvalds5-3/+5
We already had the implementation for __udiv_qrnnd (unsigned divide for multi-precision arithmetic) as part of the alpha math emulation code. But you can disable the math emulation code - even if you shouldn't - and then the MPI code that actually wants this functionality (and is needed by various crypto functions) will fail to build. So move the extended-precision divide code to be a regular library function, just like all the regular division code is. That way ie is available regardless of math-emulation. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-19alpha: mark 'Jensen' platform as no longer brokenLinus Torvalds2-6/+5
Ok, it almost certainly is still broken on actual hardware, but the immediate reason for it having been marked BROKEN was a build error that is fixed by just making sure the low-level IO header file is included sufficiently early that the __EXTERN_INLINE hackery takes effect. This was marked broken back in 2017 by commit 1883c9f49d02 ("alpha: mark jensen as broken"), but Ulrich Teichert made me look at it as part of my cross-build work to make sure -Werror actually does the right thing. There are lots of alpha configurations that do not build cleanly, but now it's no longer because Jensen wouldn't be buildable. That said, because the Jensen platform doesn't force PCI to be enabled (Jensen only had EISA), it ends up being somewhat interesting as a source of odd configs. Reported-by: Ulrich Teichert <krypton@ulrich-teichert.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-18Merge tag 's390-5.15-3' of ↵Linus Torvalds5-23/+11
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Fix potential out-of-range access during secure boot facility detection. - Fully validate the VMA before calling follow_pte() in pci code. - Remove arch specific WARN_DYNAMIC_STACK config option. - Fix zcrypto kernel doc comments. - Update defconfigs. * tag 's390-5.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: remove WARN_DYNAMIC_STACK s390/ap: fix kernel doc comments s390: update defconfigs s390/sclp: fix Secure-IPL facility detection s390/pci_mmio: fully validate the VMA before calling follow_pte()
2021-09-18alpha: make 'Jensen' IO functions build againLinus Torvalds2-5/+5
The Jensen IO functions are overly copmplicated because some of the IO addresses refer to special 'local IO' ports, and they get accessed differently. That then makes gcc not actually inline them, and since they were marked "extern inline" when included through the regular <asm/io.h> path, and then only marked "inline" when included from sys_jensen.c, you never necessarily got a body for the IO functions at all. The intent of the sys_jensen.c code is to actually get the non-inlined copy generated, so remove the 'inline' from the magic macro that is supposed to sort this all out. Also, do not mix 'extern inline' functions (that may or may not be inlined and will not generate a function body if they are not) with 'static inline' (that _will_ generate a function body when not inlined). Because gcc will complain about this situation: error: ‘jensen_bus_outb’ is static but used in inline function ‘jensen_outb’ which is not static because gcc basically doesn't know whether to generate a body for that static inline function or not for that call site. So make all of these use that __EXTERN_INLINE marker. Gcc will generally not inline these things on use, and then generate the function body out-of-line in sys_jensen.c. This makes the core IO functions build for the alpha Jensen config. Not that the rest then builds, because it turns out Jensen also doesn't enable PCI, which then makes other drievrs very unhappy, but that's a separate issue. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-17Merge tag 'dma-mapping-5.15-1' of git://git.infradead.org/users/hch/dma-mappingLinus Torvalds1-1/+3
Pull dma-mapping fixes from Christoph Hellwig: - page align size in sparc32 arch_dma_alloc (Andreas Larsson) - tone down a new dma-debug message (Hamza Mahfooz) - fix the kerneldoc for dma_map_sg_attrs (me) * tag 'dma-mapping-5.15-1' of git://git.infradead.org/users/hch/dma-mapping: sparc32: page align size in arch_dma_alloc dma-debug: prevent an error message from causing runtime problems dma-mapping: fix the kerneldoc for dma_map_sg_attrs
2021-09-17Merge tag 'arm64-fixes' of ↵Linus Torvalds2-3/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux Pull arm64 fixes and cleanups from Catalin Marinas: - Fix the memset() size when re-initialising the SVE state. - Mark __stack_chk_guard as __ro_after_init. - Remove duplicate include. * tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: arm64: Mark __stack_chk_guard as __ro_after_init arm64/kernel: remove duplicate include in process.c arm64/sve: Use correct size when reinitialising SVE state
2021-09-17Merge tag 'for-linus-5.15b-rc2-tag' of ↵Linus Torvalds2-2/+12
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip Pull xen fixes from Juergen Gross: - The first hunk of a Xen swiotlb fixup series fixing multiple minor issues and doing some small cleanups - Some further Xen related fixes avoiding WARN() splats when running as Xen guests or dom0 - A Kconfig fix allowing the pvcalls frontend to be built as a module * tag 'for-linus-5.15b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip: swiotlb-xen: drop DEFAULT_NSLABS swiotlb-xen: arrange to have buffer info logged swiotlb-xen: drop leftover __ref swiotlb-xen: limit init retries swiotlb-xen: suppress certain init retries swiotlb-xen: maintain slab count properly swiotlb-xen: fix late init retry swiotlb-xen: avoid double free xen/pvcalls: backend can be a module xen: fix usage of pmd_populate in mremap for pv guests xen: reset legacy rtc flag for PV domU PM: base: power: don't try to use non-existing RTC for storing data xen/balloon: use a kernel thread instead a workqueue
2021-09-17arm: dts: vexpress: Fix addressing issues with 'motherboard-bus' nodesRob Herring13-92/+52
The 'motherboard-bus' node in Arm Ltd boards fails schema checks as 'simple-bus' child nodes must have a unit-address. The 'ranges' handling is also wrong (or at least strange) as the mapping of SMC chip selects should be in the 'arm,vexpress,v2m-p1' node rather than a generic 'simple-bus' node. Either there's 1 too many levels of 'simple-bus' nodes or 'ranges' should be moved down a level. The latter change is more simple, so let's do that. As the 'ranges' value doesn't vary for a given motherboard instance, we can move 'ranges' into the motherboard dtsi files. Link: https://lore.kernel.org/r/20210819184239.1192395-6-robh@kernel.org Cc: Andre Przywara <andre.przywara@arm.com> Cc: Sudeep Holla <sudeep.holla@arm.com> Cc: Linus Walleij <linus.walleij@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Rob Herring <robh@kernel.org> Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
2021-09-16alpha: Declare virt_to_phys and virt_to_bus parameter as pointer to volatileGuenter Roeck1-3/+3
Some drivers pass a pointer to volatile data to virt_to_bus() and virt_to_phys(), and that works fine. One exception is alpha. This results in a number of compile errors such as drivers/net/wan/lmc/lmc_main.c: In function 'lmc_softreset': drivers/net/wan/lmc/lmc_main.c:1782:50: error: passing argument 1 of 'virt_to_bus' discards 'volatile' qualifier from pointer target type drivers/atm/ambassador.c: In function 'do_loader_command': drivers/atm/ambassador.c:1747:58: error: passing argument 1 of 'virt_to_bus' discards 'volatile' qualifier from pointer target type Declare the parameter of virt_to_phys and virt_to_bus as pointer to volatile to fix the problem. Signed-off-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-16Merge tag 'for-5.15/parisc-4' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux Pull parisc fix from Helge Deller: "Fix a build warning when using the PAGE0 pointer" * tag 'for-5.15/parisc-4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux: parisc: Use absolute_pointer() to define PAGE0
2021-09-16Merge tag 'm68k-for-v5.15-tag2' of ↵Linus Torvalds3-12/+16
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k Pull m68k fixes from Geert Uytterhoeven: - Warning fixes to mitigate CONFIG_WERROR=y * tag 'm68k-for-v5.15-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: m68k: mvme: Remove overdue #warnings in RTC handling m68k: Double cast io functions to unsigned long
2021-09-16arm64: Mark __stack_chk_guard as __ro_after_initDan Li1-1/+1
__stack_chk_guard is setup once while init stage and never changed after that. Although the modification of this variable at runtime will usually cause the kernel to crash (so does the attacker), it should be marked as __ro_after_init, and it should not affect performance if it is placed in the ro_after_init section. Signed-off-by: Dan Li <ashimida@linux.alibaba.com> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/1631612642-102881-1-git-send-email-ashimida@linux.alibaba.com Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-09-16arm64/kernel: remove duplicate include in process.cLv Ruyi1-1/+0
Remove all but the first include of linux/sched.h from process.c Reported-by: Zeal Robot <zealci@zte.com.cn> Signed-off-by: Lv Ruyi <lv.ruyi@zte.com.cn> Acked-by: Mark Rutland <mark.rutland@arm.com> Link: https://lore.kernel.org/r/20210902011126.29828-1-lv.ruyi@zte.com.cn Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-09-16arm64/sve: Use correct size when reinitialising SVE stateMark Brown1-1/+1
When we need a buffer for SVE register state we call sve_alloc() to make sure that one is there. In order to avoid repeated allocations and frees we keep the buffer around unless we change vector length and just memset() it to ensure a clean register state. The function that deals with this takes the task to operate on as an argument, however in the case where we do a memset() we initialise using the SVE state size for the current task rather than the task passed as an argument. This is only an issue in the case where we are setting the register state for a task via ptrace and the task being configured has a different vector length to the task tracing it. In the case where the buffer is larger in the traced process we will leak old state from the traced process to itself, in the case where the buffer is smaller in the traced process we will overflow the buffer and corrupt memory. Fixes: bc0ee4760364 ("arm64/sve: Core task context handling") Cc: <stable@vger.kernel.org> # 4.15.x Signed-off-by: Mark Brown <broonie@kernel.org> Link: https://lore.kernel.org/r/20210909165356.10675-1-broonie@kernel.org Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
2021-09-16s390/bpf: Fix optimizing out zero-extensionsIlya Leoshkevich1-28/+30
Currently the JIT completely removes things like `reg32 += 0`, however, the BPF_ALU semantics requires the target register to be zero-extended in such cases. Fix by optimizing out only the arithmetic operation, but not the subsequent zero-extension. Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-09-16s390/bpf: Fix 64-bit subtraction of the -0x80000000 constantIlya Leoshkevich1-2/+7
The JIT uses agfi for subtracting constants, but -(-0x80000000) cannot be represented as a 32-bit signed binary integer. Fix by using algfi in this particular case. Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Fixes: 054623105728 ("s390/bpf: Add s390x eBPF JIT compiler backend") Reviewed-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-09-16s390/bpf: Fix branch shortening during codegen passIlya Leoshkevich1-2/+1
EMIT6_PCREL() macro assumes that the previous pass generated 6 bytes of code, which is not the case if branch shortening took place. Fix by using jit->prg, like all the other EMIT6_PCREL_*() macros. Reported-by: Johan Almbladh <johan.almbladh@anyfinetworks.com> Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2021-09-16parisc: Use absolute_pointer() to define PAGE0Helge Deller1-1/+1
Use absolute_pointer() wrapper for PAGE0 to avoid this compiler warning: arch/parisc/kernel/setup.c: In function 'start_parisc': error: '__builtin_memcmp_eq' specified bound 8 exceeds source size 0 Signed-off-by: Helge Deller <deller@gmx.de> Co-Developed-by: Guenter Roeck <linux@roeck-us.net> Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
2021-09-16Merge tag 'hyperv-fixes-signed-20210915' of ↵Linus Torvalds1-17/+26
git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux Pull hyperv fixes from Wei Liu: - Fix kernel crash caused by uio driver (Vitaly Kuznetsov) - Remove on-stack cpumask from HV APIC code (Wei Liu) * tag 'hyperv-fixes-signed-20210915' of git://git.kernel.org/pub/scm/linux/kernel/git/hyperv/linux: x86/hyperv: remove on-stack cpumask from hv_send_ipi_mask_allbutself asm-generic/hyperv: provide cpumask_to_vpset_noself Drivers: hv: vmbus: Fix kernel crash upon unbinding a device from uio_hv_generic driver
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-01 04:51:07 +0300