summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2017-09-04MIPS: Add __ioread64_copyPaul Burton3-1/+45
We currently have __ioread32_copy, __iowrite32_copy & __iowrite64_copy helpers in lib/iomap_copy.c. This patch adds __ioread64_copy to round out the set, allowing copies from I/O memory using 32 or 64 bit reads. [ralf@linux-mips.org: Changed to move all the code of this patch to be applied to arch/mips temporarily.] Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17025/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04MIPS: CPS: Read GIC_VL_IDENT directly, not via irqchip driverPaul Burton1-1/+1
Rather than calling the gic_read_local_vp_id() function from the GIC irqchip driver, call read_gic_vl_ident() to read the GIC_VL_IDENT register directly. This will allow us to remove gic_read_local_vp_id() from the irqchip driver in a further patch, since that driver doesn't actually care about the register's value. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Cc: Jason Cooper <jason@lakedaemon.net> Cc: Marc Zyngier <marc.zyngier@arm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/17023/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-04net: Remove CONFIG_NETFILTER_DEBUG and _ASSERT() macros.Varsha Rao2-2/+0
This patch removes CONFIG_NETFILTER_DEBUG and _ASSERT() macros as they are no longer required. Replace _ASSERT() macros with WARN_ON(). Signed-off-by: Varsha Rao <rvarsha016@gmail.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2017-09-04powerpc/xive: Fix section __init warningCédric Le Goater1-1/+1
xive_spapr_init() is called from a __init routine and calls __init routines. Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-04powerpc: Fix kernel crash in emulation of vector loads and storesPaul Mackerras1-4/+4
Commit 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code", 2017-08-30) changed the register usage in get_vr and put_vr with the aim of leaving the register number in r3 untouched on return. Unfortunately, r6 was not a good choice, as the callers as of 350779a29f11 store a MSR value in r6. Then, in commit c22435a5f3d8 ("powerpc: Emulate FP/vector/VSX loads/stores correctly when regs not live", 2017-08-30), the saving and restoring of the MSR got moved into get_vr and put_vr. Either way, the effect is that we put a value in MSR that only has the 0x3f8 bits non-zero, meaning that we are switching to 32-bit mode. That leads to a crash like this: Unable to handle kernel paging request for instruction fetch Faulting instruction address: 0x0007bea0 Oops: Kernel access of bad area, sig: 11 [#12] LE SMP NR_CPUS=2048 NUMA PowerNV Modules linked in: vmx_crypto binfmt_misc ip_tables x_tables autofs4 crc32c_vpmsum CPU: 6 PID: 32659 Comm: trashy_testcase Tainted: G D 4.13.0-rc2-00313-gf3026f57e6ed-dirty #23 task: c000000f1bb9e780 task.stack: c000000f1ba98000 NIP: 000000000007bea0 LR: c00000000007b054 CTR: c00000000007be70 REGS: c000000f1ba9b960 TRAP: 0400 Tainted: G D (4.13.0-rc2-00313-gf3026f57e6ed-dirty) MSR: 10000000400010a1 <HV,ME,IR,LE> CR: 48000228 XER: 00000000 CFAR: c00000000007be74 SOFTE: 1 GPR00: c00000000007b054 c000000f1ba9bbe0 c000000000e6e000 000000000000001d GPR04: c000000f1ba9bc00 c00000000007be70 00000000000000e8 9000000002009033 GPR08: 0000000002000000 100000000282f033 000000000b0a0900 0000000000001009 GPR12: 0000000000000000 c00000000fd42100 0706050303020100 a5a5a5a5a5a5a5a5 GPR16: 2e2e2e2e2e2de70c 2e2e2e2e2e2e2e2d 0000000000ff00ff 0606040202020000 GPR20: 000000000000005b ffffffffffffffff 0000000003020100 0000000000000000 GPR24: c000000f1ab90020 c000000f1ba9bc00 0000000000000001 0000000000000001 GPR28: c000000f1ba9bc90 c000000f1ba9bea0 000000000b0a0908 0000000000000001 NIP [000000000007bea0] 0x7bea0 LR [c00000000007b054] emulate_loadstore+0x1044/0x1280 Call Trace: [c000000f1ba9bbe0] [c000000000076b80] analyse_instr+0x60/0x34f0 (unreliable) [c000000f1ba9bc70] [c00000000007b7ec] emulate_step+0x23c/0x544 [c000000f1ba9bce0] [c000000000053424] arch_uprobe_skip_sstep+0x24/0x40 [c000000f1ba9bd00] [c00000000024b2f8] uprobe_notify_resume+0x598/0xba0 [c000000f1ba9be00] [c00000000001c284] do_notify_resume+0xd4/0xf0 [c000000f1ba9be30] [c00000000000bd44] ret_from_except_lite+0x70/0x74 Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace a7ae7a7f3e0256b5 ]--- To fix this, we just revert to using r3 as before, since the callers don't rely on r3 being left unmodified. Fortunately, this can't be triggered by a misaligned load or store, because vector loads and stores truncate misaligned addresses rather than taking an alignment interrupt. It can be triggered using uprobes. Fixes: 350779a29f11 ("powerpc: Handle most loads and stores in instruction emulation code") Reported-by: Anton Blanchard <anton@ozlabs.org> Signed-off-by: Paul Mackerras <paulus@ozlabs.org> Tested-by: Anton Blanchard <anton@samba.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-04Merge branch 'linus' into locking/core, to fix up conflictsIngo Molnar83-581/+347
Conflicts: mm/page_alloc.c Signed-off-by: Ingo Molnar <mingo@kernel.org>
2017-09-04Merge tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds8-120/+64
Pull drm updates from Dave Airlie: "This is the main drm pull request for 4.14 merge window. I'm sending this early, as my continuing journey into fatherhood is occurring really soon now, I'm going to be mostly useless for the next couple of weeks, though I may be able to read email, I doubt I'll be doing much patch applications or git sending. If anything urgent pops up I've asked Daniel/Jani/Alex/Sean to try and direct stuff towards you. Outside drm changes: Some rcar-du updates that touch the V4L tree, all acks should be in place. It adds one export to the radix tree code for new i915 use case. There are some minor AGP cleanups (don't see that too often). Changes to the vbox driver in staging to avoid breaking compilation. Summary: core: - Atomic helper fixes - Atomic UAPI fixes - Add YCBCR 4:2:0 support - Drop set_busid hook - Refactor fb_helper locking - Remove a bunch of internal APIs - Add a bunch of better default handlers - Format modifier/blob plane property added - More internal header refactoring - Make more internal API names consistent - Enhanced syncobj APIs (wait/signal/reset/create signalled) bridge: - Add Synopsys Designware MIPI DSI host bridge driver tiny: - Add Pervasive Displays RePaper displays - Add support for LEGO MINDSTORMS EV3 LCD i915: - Lots of GEN10/CNL support patches - drm syncobj support - Skylake+ watermark refactoring - GVT vGPU 48-bit ppgtt support - GVT performance improvements - NOA change ioctl - CCS (color compression) scanout support - GPU reset improvements amdgpu: - Initial hugepage support - BO migration logic rework - Vega10 improvements - Powerplay fixes - Stop reprogramming the MC - Fixes for ACP audio on stoney - SR-IOV fixes/improvements - Command submission overhead improvements amdkfd: - Non-dGPU upstreaming patches - Scratch VA ioctl - Image tiling modes - Update PM4 headers for new firmware - Drop all BUG_ONs. nouveau: - GP108 modesetting support. - Disable MSI on big endian. vmwgfx: - Add fence fd support. msm: - Runtime PM improvements exynos: - NV12MT support - Refactor KMS drivers imx-drm: - Lock scanout channel to improve memory bw - Cleanups etnaviv: - GEM object population fixes tegra: - Prep work for Tegra186 support - PRIME mmap support sunxi: - HDMI support improvements - HDMI CEC support omapdrm: - HDMI hotplug IRQ support - Big driver cleanup - OMAP5 DSI support rcar-du: - vblank fixes - VSP1 updates arcgpu: - Minor fixes stm: - Add STM32 DSI controller driver dw_hdmi: - Add support for Rockchip RK3399 - HDMI CEC support atmel-hlcdc: - Add 8-bit color support vc4: - Atomic fixes - New ioctl to attach a label to a buffer object - HDMI CEC support - Allow userspace to dictate rendering order on submit ioctl" * tag 'drm-for-v4.14' of git://people.freedesktop.org/~airlied/linux: (1074 commits) drm/syncobj: Add a signal ioctl (v3) drm/syncobj: Add a reset ioctl (v3) drm/syncobj: Add a syncobj_array_find helper drm/syncobj: Allow wait for submit and signal behavior (v5) drm/syncobj: Add a CREATE_SIGNALED flag drm/syncobj: Add a callback mechanism for replace_fence (v3) drm/syncobj: add sync obj wait interface. (v8) i915: Use drm_syncobj_fence_get drm/syncobj: Add a race-free drm_syncobj_fence_get helper (v2) drm/syncobj: Rename fence_get to find_fence drm: kirin: Add mode_valid logic to avoid mode clocks we can't generate drm/vmwgfx: Bump the version for fence FD support drm/vmwgfx: Add export fence to file descriptor support drm/vmwgfx: Add support for imported Fence File Descriptor drm/vmwgfx: Prepare to support fence fd drm/vmwgfx: Fix incorrect command header offset at restart drm/vmwgfx: Support the NOP_ERROR command drm/vmwgfx: Restart command buffers after errors drm/vmwgfx: Move irq bottom half processing to threads drm/vmwgfx: Don't use drm_irq_[un]install ...
2017-09-04Merge branch 'for-linus' of ↵Linus Torvalds3-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull misc fixes from Al Viro: "Loose ends and regressions from the last merge window. Strictly speaking, only binfmt_flat thing is a build regression per se - the rest is 'only sparse cares about that' stuff" [ This came in before the 4.13 release and could have gone there, but it was late in the release and nothing seemed critical enough to care, so I'm pulling it in the 4.14 merge window instead - Linus ] * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: binfmt_flat: fix arch/m32r and arch/microblaze flat_put_addr_at_rp() compat_hdio_ioctl: Fix a declaration <linux/uaccess.h>: Fix copy_in_user() declaration annotate RWF_... flags teach SYSCALL_DEFINE/COMPAT_SYSCALL_DEFINE to handle __bitwise arguments
2017-09-04Merge branch 'pm-sleep'Rafael J. Wysocki1-2/+2
* pm-sleep: ACPI / PM: Check low power idle constraints for debug only PM / s2idle: Rename platform operations structure PM / s2idle: Rename ->enter_freeze to ->enter_s2idle PM / s2idle: Rename freeze_state enum and related items PM / s2idle: Rename PM_SUSPEND_FREEZE to PM_SUSPEND_TO_IDLE ACPI / PM: Prefer suspend-to-idle over S3 on some systems platform/x86: intel-hid: Wake up Dell Latitude 7275 from suspend-to-idle PM / suspend: Define pr_fmt() in suspend.c PM / suspend: Use mem_sleep_labels[] strings in messages PM / sleep: Put pm_test under CONFIG_PM_SLEEP_DEBUG PM / sleep: Check pm_wakeup_pending() in __device_suspend_noirq() PM / core: Add error argument to dpm_show_time() PM / core: Split dpm_suspend_noirq() and dpm_resume_noirq() PM / s2idle: Rearrange the main suspend-to-idle loop PM / timekeeping: Print debug messages when requested PM / sleep: Mark suspend/hibernation start and finish PM / sleep: Do not print debug messages by default PM / suspend: Export pm_suspend_target_state
2017-09-04Merge branch 'pm-cpufreq'Rafael J. Wysocki1-1/+0
* pm-cpufreq: (33 commits) cpufreq: imx6q: Fix imx6sx low frequency support cpufreq: speedstep-lib: make several arrays static, makes code smaller cpufreq: ti: Fix 'of_node_put' being called twice in error handling path cpufreq: dt-platdev: Drop few entries from whitelist cpufreq: dt-platdev: Automatically create cpufreq device with OPP v2 ARM: ux500: don't select CPUFREQ_DT cpufreq: Convert to using %pOF instead of full_name cpufreq: Cap the default transition delay value to 10 ms cpufreq: dbx500: Delete obsolete driver mfd: db8500-prcmu: Get rid of cpufreq dependency cpufreq: enable the DT cpufreq driver on the Ux500 cpufreq: Loongson2: constify platform_device_id cpufreq: dt: Add r8a7796 support to to use generic cpufreq driver cpufreq: remove setting of policy->cpu in policy->cpus during init cpufreq: mediatek: add support of cpufreq to MT7622 SoC cpufreq: mediatek: add cleanups with the more generic naming cpufreq: rcar: Add support for R8A7795 SoC cpufreq: dt: Add rk3328 compatible to use generic cpufreq driver cpufreq: s5pv210: add missing of_node_put() cpufreq: Allow dynamic switching with CPUFREQ_ETERNAL latency ...
2017-09-04Merge branches 'acpi-x86', 'acpi-soc', 'acpi-pmic' and 'acpi-apple'Rafael J. Wysocki7-11/+27
* acpi-x86: ACPI / boot: Add number of legacy IRQs to debug output ACPI / boot: Correct address space of __acpi_map_table() ACPI / boot: Don't define unused variables * acpi-soc: ACPI / LPSS: Don't abort ACPI scan on missing mem resource * acpi-pmic: ACPI / PMIC: xpower: Do pinswitch magic when reading GPADC * acpi-apple: spi: Use Apple device properties in absence of ACPI resources ACPI / scan: Recognize Apple SPI and I2C slaves ACPI / property: Support Apple _DSM properties ACPI / property: Don't evaluate objects for devices w/o handle treewide: Consolidate Apple DMI checks
2017-09-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds3-23/+4
Pull MIPS fixes from Ralf Baechle: "The two indirect syscall fixes have sat in linux-next for a few days. I did check back with a hardware designer to ensure a SYNC is really what's required for the GIC fix and so the GIC fix didn't make it into to linux-next in time for this final pull request. It builds in local build tests and passes Imagination's test system" * 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: irqchip: mips-gic: SYNC after enabling GIC region MIPS: Remove pt_regs adjustments in indirect syscall handler MIPS: seccomp: Fix indirect syscall args
2017-09-03Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds3-8/+10
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Thomas Gleixner: - Expand the space for uncompressing as the LZ4 worst case does not fit into the currently reserved space - Validate boot parameters more strictly to prevent out of bound access in the decompressor/boot code - Fix off by one errors in get_segment_base() * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/boot: Prevent faulty bootparams.screeninfo from causing harm x86/boot: Provide more slack space during decompression x86/ldt: Fix off by one in get_segment_base()
2017-09-02powerpc/xive: improve debugging macrosCédric Le Goater1-2/+6
Having the CPU identifier in the debug logs is helpful when tracking issues. Also add some more logging and fix a compile issue in xive_do_source_eoi(). Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02powerpc/xive: add XIVE Exploitation Mode to CASCédric Le Goater2-2/+37
On POWER9, the Client Architecture Support (CAS) negotiation process determines whether the guest operates in XIVE Legacy compatibility or in XIVE exploitation mode. Now that we have initial guest support for the XIVE interrupt controller, let's inform the hypervisor what we can do. The platform advertises the XIVE Exploitation Mode support using the property "ibm,arch-vec-5-platform-support-vec-5", byte 23 bits 0-1 : - 0b00 XIVE legacy mode Only - 0b01 XIVE exploitation mode Only - 0b10 XIVE legacy or exploitation mode The OS asks for XIVE Exploitation Mode support using the property "ibm,architecture-vec-5", byte 23 bits 0-1: - 0b00 XIVE legacy mode Only - 0b01 XIVE exploitation mode Only Signed-off-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02powerpc/xive: introduce H_INT_ESB hcallCédric Le Goater4-3/+53
The H_INT_ESB hcall() is used to issue a load or store to the ESB page instead of using the MMIO pages. This can be used as a workaround on some HW issues. The OS knows that this hcall should be used on an interrupt source when the ESB hcall flag is set to 1 in the hcall H_INT_GET_SOURCE_INFO. To maintain the frontier between the xive frontend and backend, we introduce a new xive operation 'esb_rw' to be used in the routines doing memory accesses on the ESBs. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02powerpc/xive: add the HW IRQ number under xive_irq_dataCédric Le Goater3-0/+5
It will be required later by the H_INT_ESB hcall. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02powerpc/xive: introduce xive_esb_write()Cédric Le Goater1-1/+10
Some source support MMIO stores on the ESB page to perform EOI. Let's introduce a specific routine for this case even if this should be the only use of it. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02powerpc/xive: rename xive_poke_esb() in xive_esb_read()Cédric Le Goater1-10/+10
xive_poke_esb() is performing a load/read so it is better named as xive_esb_read() as we will need to introduce a xive_esb_write() routine. Also use the XIVE_ESB_LOAD_EOI offset when EOI'ing LSI interrupts. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02powerpc/xive: guest exploitation of the XIVE interrupt controllerCédric Le Goater11-8/+698
This is the framework for using XIVE in a PowerVM guest. The support is very similar to the native one in a much simpler form. Each source is associated with an Event State Buffer (ESB). This is a two bit state machine which is used to trigger events. The bits are named "P" (pending) and "Q" (queued) and can be controlled by MMIO. The Guest OS registers event (or notifications) queues on which the HW will post event data for a target to notify. Instead of OPAL calls, a set of Hypervisors call are used to configure the interrupt sources and the event/notification queues of the guest: - H_INT_GET_SOURCE_INFO used to obtain the address of the MMIO page of the Event State Buffer (PQ bits) entry associated with the source. - H_INT_SET_SOURCE_CONFIG assigns a source to a "target". - H_INT_GET_SOURCE_CONFIG determines to which "target" and "priority" is assigned to a source - H_INT_GET_QUEUE_INFO returns the address of the notification management page associated with the specified "target" and "priority". - H_INT_SET_QUEUE_CONFIG sets or resets the event queue for a given "target" and "priority". It is also used to set the notification config associated with the queue, only unconditional notification for the moment. Reset is performed with a queue size of 0 and queueing is disabled in that case. - H_INT_GET_QUEUE_CONFIG returns the queue settings for a given "target" and "priority". - H_INT_RESET resets all of the partition's interrupt exploitation structures to their initial state, losing all configuration set via the hcalls H_INT_SET_SOURCE_CONFIG and H_INT_SET_QUEUE_CONFIG. - H_INT_SYNC issue a synchronisation on a source to make sure sure all notifications have reached their queue. As for XICS, the XIVE interface for the guest is described in the device tree under the "interrupt-controller" node. A couple of new properties are specific to XIVE : - "reg" contains the base address and size of the thread interrupt managnement areas (TIMA), also called rings, for the User level and for the Guest OS level. Only the Guest OS level is taken into account today. - "ibm,xive-eq-sizes" the size of the event queues. One cell per size supported, contains log2 of size, in ascending order. - "ibm,xive-lisn-ranges" the interrupt numbers ranges assigned to the guest. These are allocated using a simple bitmap. and also : - "/ibm,plat-res-int-priorities" contains a list of priorities that the hypervisor has reserved for its own use. Tested with a QEMU XIVE model for pseries and with the Power hypervisor. Signed-off-by: Cédric Le Goater <clg@kaod.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02powerpc/xive: introduce a common routine xive_queue_page_alloc()Cédric Le Goater3-11/+27
This routine will be used in the spapr backend. Also introduce a short xive_alloc_order() helper. Signed-off-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller54-173/+292
Three cases of simple overlapping changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2017-09-02Merge tag 'armsoc-fixes' of ↵Linus Torvalds19-265/+2
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A couple of late-arriving fixes before final 4.13: - A few reverts of DT bindings on Allwinner for their ethernet driver. Discussion didn't converge, and since bindings are considered ABI it makes sense to revert instead of having to support two bindings long-term. - A fix to enumerate GPIOs properly on Marvell Armada AP806" * tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm64: dts: marvell: fix number of GPIOs in Armada AP806 description arm: dts: sunxi: Revert EMAC changes arm64: dts: allwinner: Revert EMAC changes dt-bindings: net: Revert sun8i dwmac binding
2017-09-02ARM: multi_v7_defconfig: make eSDHC driver built-inYangbo Lu1-1/+1
Sometimes root file system is deployed on SD card. It's proper to build eSDHC driver into kernel. Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-02Merge tag 'at91-ab-4.14-dt2' of ↵Olof Johansson7-12/+769
git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux into next/dt DT for 4.14 - sama5d2: add classD, ISC and QSPI - New SoM and board: sama5d27 SoM1 - at91sam9g45: add AC97 * tag 'at91-ab-4.14-dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: ARM: dts: at91: at91sam9g45: add AC97 ARM: dts: at91: sama5d2_xplained: add pin muxing and enable classd ARM: dts: at91: sama5d2: add classd nodes ARM: dts: at91: sama5d2_xplained: use pin macros instead of numbers ARM: dts: at91: at91-sama5d27_som1_ek: Add sama5d27 SoM1 EK support ARM: dts: at91: at91-sama5d27_som1: add sama5d27 SoM1 support ARM: dts: at91: sama5d2: add isc node ARM: dts: at91: sama5d2: add QSPI nodes Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-02Merge tag 'mvebu-dt64-4.14-4' of git://git.infradead.org/linux-mvebu into ↵Olof Johansson3-6/+74
next/dt64 mvebu dt64 for 4.14 (part 4) Adding more resources on the network controller ppv2.2 on Armada 7K/8K allowing to use last improvement introduced in the driver. Also enabling more network ports on the mcbin (A8K base board) * tag 'mvebu-dt64-4.14-4' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: mcbin: enable more networking ports arm64: dts: marvell: add a reference to the sysctrl syscon in the ppv2 node arm64: dts: marvell: add TX interrupts for PPv2.2 Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-02Merge tag 'sunxi-fixes-for-4.13-3' of ↵Olof Johansson19-263/+3
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt64 Allwinner fixes for 4.13, take 3 This is a revert of the EMAC bindings. The discussion has not settled down yet on a proper representation of the PHY, and therefore we cannot commit to a binding yet * tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm: dts: sunxi: Revert EMAC changes arm64: dts: allwinner: Revert EMAC changes dt-bindings: net: Revert sun8i dwmac binding arm64: allwinner: h5: fix pinctrl IRQs arm64: allwinner: a64: sopine: add missing ethernet0 alias arm64: allwinner: a64: pine64: add missing ethernet0 alias arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias Signed-off-by: Olof Johansson <olof@lixom.net> Conflicts: arch/arm64/boot/dts/allwinner/sun50i-a64-bananapi-m64.dts arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts arch/arm64/boot/dts/allwinner/sun50i-a64-sopine-baseboard.dts
2017-09-02Merge tag 'sunxi-fixes-for-4.13-3' of ↵Olof Johansson19-260/+3
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into next/dt Allwinner fixes for 4.13, take 3 This is a revert of the EMAC bindings. The discussion has not settled down yet on a proper representation of the PHY, and therefore we cannot commit to a binding yet * tag 'sunxi-fixes-for-4.13-3' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: arm: dts: sunxi: Revert EMAC changes arm64: dts: allwinner: Revert EMAC changes dt-bindings: net: Revert sun8i dwmac binding arm64: allwinner: h5: fix pinctrl IRQs arm64: allwinner: a64: sopine: add missing ethernet0 alias arm64: allwinner: a64: pine64: add missing ethernet0 alias arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-02Merge tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu into fixesOlof Johansson1-2/+2
mvebu fixes for 4.13 (part 3) Fix number of GPIOs in AP806 description for Armada 7K/8K * tag 'mvebu-fixes-4.13-3' of git://git.infradead.org/linux-mvebu: arm64: dts: marvell: fix number of GPIOs in Armada AP806 description Signed-off-by: Olof Johansson <olof@lixom.net>
2017-09-02clk: at91: add audio pll clock driversQuentin Schulz1-0/+4
This new clock driver set allows to have a fractional divided clock that would generate a precise clock particularly suitable for audio applications. The main audio pll clock has two children clocks: one that is connected to the PMC, the other that can directly drive a pad. As these two routes have different enable bits and different dividers and divider formulas, they are handled by two different drivers. Each of them could modify the rate of the main audio pll parent. The main audio pll clock can output 620MHz to 700MHz. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Quentin Schulz <quentin.schulz@free-electrons.com> Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com> Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
2017-09-02powerpc/sstep: Avoid used uninitialized errorMichael Ellerman1-0/+1
Older compilers think val may be used uninitialized: arch/powerpc/lib/sstep.c: In function 'emulate_loadstore': arch/powerpc/lib/sstep.c:2758:23: error: 'val' may be used uninitialized in this function We know better, but initialise val to 0 to avoid breaking the build. Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01MIPS: Malta: Use new GIC accessor functionsPaul Burton1-3/+3
Use the accessor functions provided by asm/mips-gic.h rather than calling functions provided by the GIC irqchip driver, in preparation for those non-IRQ-related functions being removed from the irqchip driver. Signed-off-by: Paul Burton <paul.burton@imgtec.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2017-09-01ARC: Re-enable MMU upon Machine Check exceptionJose Abreu2-3/+6
I recently came upon a scenario where I would get a double fault machine check exception tiriggered by a kernel module. However the ensuing crash stacktrace (ksym lookup) was not working correctly. Turns out that machine check auto-disables MMU while modules are allocated in kernel vaddr spapce. This patch re-enables the MMU before start printing the stacktrace making stacktracing of modules work upon a fatal exception. Cc: stable@kernel.org Signed-off-by: Jose Abreu <joabreu@synopsys.com> Reviewed-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: moved code into low level handler to avoid in 2 places]
2017-09-01ARC: Show fault information passed to show_kernel_fault_diag()Jose Abreu2-2/+5
Currently we pass a string argument to show_kernel_fault_diag() which describes the reason for the fault. This is not being used so just add a pr_info() which outputs the fault information. With this change we get from: | | Path: /bin/busybox | CPU: 0 PID: 92 Comm: modprobe Not tainted 4.12.0-rc6 #30 | task: 9a254780 task.stack: 9a212000 | | [ECR ]: 0x00200400 => Other Fatal Err | to: | | Unhandled Machine Check Exception | Path: /bin/busybox | CPU: 0 PID: 92 Comm: modprobe Not tainted 4.12.0-rc6 #37 | task: 9a240780 task.stack: 9a226000 | |[ECR ]: 0x00200400 => Machine Check (Other Fatal Err) | Which can help debugging. Cc: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Jose Abreu <joabreu@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: [plat-hsdk] initial port for HSDK boardAlexey Brodkin8-2/+358
This initial port adds support of ARC HS Development Kit board with some basic features such serial port, USB, SD/MMC and Ethernet. Essentially we run Linux kernel on all 4 cores (i.e. utilize SMP) and heavily use IO Coherency for speeding-up DMA-aware peripherals. Note as opposed to other ARC boards we link Linux kernel to 0x9000_0000 intentionally because cores 1 and 3 configured with DCCM situated at our more usual link base 0x8000_0000. We still can use memory region starting at 0x8000_0000 as we reallocate DCCM in our platform code. Note that PAE remapping for DMA clients does not work due to an RTL bug, so CREG_PAE register must be programmed to all zeroes, otherwise it will cause problems with DMA to/from peripherals even if PAE40 is not used. Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com> Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: mm: Decouple RAM base address from kernel link addressEugeniy Paltsev8-10/+18
[Needed for HSDK] Currently the first page of system (hence RAM base) is assumed to be @ CONFIG_LINUX_LINK_BASE, where kernel itself is linked. However is case of HSDK platform, for reasons explained in that patch, this is not true. kernel needs to be linked @ 0x9000_0000 while DDR is still wired at 0x8000_0000. To properly account for this 256M of RAM, we need to introduce a new option and base page frame accountiing off of it. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: renamed CONFIG_KERNEL_RAM_BASE_ADDRESS => CONFIG_LINUX_RAM_BASE : simplified changelog]
2017-09-01ARCv2: IOC: Tighten up the contraints (specifically base / size alignment)Eugeniy Paltsev1-8/+19
[Needed for HSDK] - Currently IOC base is hardcoded to 0x8000_0000 which is default value of LINUX_LINK_BASE, but may not always be the case - IOC programming model imposes the constraint that IOC aperture size needs to be aligned to IOC base address, which we were not checking so far. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: reworked the changelog]
2017-09-01ARC: [plat-axs103] refactor the DT fudging codeVineet Gupta1-24/+22
with clk frequency setting code gone by prev commits, we can elide the unconditonal DT parsing to the specific case of quad core config where we possibly need to fudge the DT value. Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: [plat-axs103] use clk driver #2: Add core pll node to DT to manage cpu clkEugeniy Paltsev2-4/+18
Add core pll node (core_clk) to manage cpu frequency. core_clk represents pll itself. input_clk represents clock signal source (basically xtal) which comes to pll input. Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2017-09-01ARC: [plat-axs103] use clk driver #1: Get rid of platform specific cpu clk ↵Eugeniy Paltsev1-113/+5
setting historically axs103 platform code used to set the cpu clk by writing to PLL registers directly. however the axs10x clk driver is now upstream so no need to do this amymore. Driver is selected automatically when CONFIG_ARC_PLAT_AXS10X is set Signed-off-by: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com> Signed-off-by: Vineet Gupta <vgupta@synopsys.com> [vgupta: deleted more code not needed anymore]
2017-09-01Merge branch 'for-linus' of ↵Linus Torvalds2-2/+9
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Martin Schwidefsky: "Three more bug fixes for v4.13. The two memory management related fixes are quite new, they fix kernel crashes that can be triggered by user space. The third commit fixes a bug in the vfio ccw translation code" * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/mm: fix BUG_ON in crst_table_upgrade s390/mm: fork vs. 5 level page tabel vfio: ccw: fix bad ptr math for TIC cda translation
2017-09-01Merge tag 'nand/for-4.14' of git://git.infradead.org/l2-mtd into mtd/nextBoris Brezillon51-51/+51
From Boris: " This pull request contains the following core changes: * Fix memory leaks in the core * Remove unused NAND locking support * Rename nand.h into rawnand.h (preparing support for spi NANDs) * Use NAND_MAX_ID_LEN where appropriate * Fix support for 20nm Hynix chips * Fix support for Samsung and Hynix SLC NANDs and the following driver changes: * Various cleanup, improvements and fixes in the qcom driver * Fixes for bugs detected by various static code analysis tools * Fix mxc ooblayout definition * Add a new part_parsers to tmio and sharpsl platform data in order to define a custom list of partition parsers * Request the reset line in exclusive mode in the sunxi driver * Fix a build error in the orion-nand driver when compiled for ARMv4 * Allow 64-bit mvebu platforms to select the PXA3XX driver "
2017-09-01dma-coherent: remove the DMA_MEMORY_MAP and DMA_MEMORY_IO flagsChristoph Hellwig3-35/+24
DMA_MEMORY_IO was never used in the tree, so remove it. That means there is no need for the DMA_MEMORY_MAP flag either now, so remove it as well and change dma_declare_coherent_memory to return a normal errno value. Signed-off-by: Christoph Hellwig <hch@lst.de> Reviewed-by: Marek Szyprowski <m.szyprowski@samsung.com>
2017-09-01Merge branches 'arm/exynos', 'arm/renesas', 'arm/rockchip', 'arm/omap', ↵Joerg Roedel2-1/+15
'arm/mediatek', 'arm/tegra', 'arm/qcom', 'arm/smmu', 'ppc/pamu', 'x86/vt-d', 'x86/amd', 's390' and 'core' into next
2017-09-01x86/idt: Fix the X86_TRAP_BP gateIngo Molnar1-1/+5
Andrei Vagin reported a CRIU regression and bisected it back to: 90f6225fba0c ("x86/idt: Move IST stack based traps to table init") This table init conversion loses the system-gate property of X86_TRAP_BP and erroneously moves it from DPL3 to DPL0. Fix it. Reported-by: Andrei Vagin <avagin@virtuozzo.com> Signed-off-by: Ingo Molnar <mingo@kernel.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: dvlasenk@redhat.com Cc: linux-tip-commits@vger.kernel.org Cc: peterz@infradead.org Cc: brgerst@gmail.com Cc: rostedt@goodmis.org Cc: bp@alien8.de Cc: luto@kernel.org Cc: jpoimboe@redhat.com Cc: Cyrill Gorcunov <gorcunov@openvz.org> Cc: torvalds@linux-foundation.org Cc: tip-bot for Jacob Shin <tipbot@zytor.com> Link: http://lkml.kernel.org/r/20170901082630.xvyi5bwk6etmppqc@gmail.com
2017-09-01axonram: Return directly after a failed kzalloc() in axon_ram_probe()Markus Elfring1-22/+17
* Return directly after a call of the function "kzalloc" failed at the beginning. * Delete a repeated check for the local variable "bank" which became unnecessary with this refactoring. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01axonram: Improve a size determination in axon_ram_probe()Markus Elfring1-1/+1
Replace the specification of a data structure by a pointer dereference as the parameter for the operator "sizeof" to make the corresponding size determination a bit safer according to the Linux coding style convention. Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01axonram: Delete an error message for a failed memory allocation in ↵Markus Elfring1-1/+0
axon_ram_probe() Omit an extra message for a memory allocation failure in this function. This issue was detected by using the Coccinelle software. Link: http://events.linuxfoundation.org/sites/events/files/slides/LCJ16-Refactor_Strings-WSang_0.pdf Signed-off-by: Markus Elfring <elfring@users.sourceforge.net> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01powerpc/powernv/npu: Move tlb flush before launching ATSDAlistair Popple1-6/+6
The nest MMU tlb flush needs to happen before the GPU translation shootdown is launched to avoid the GPU refilling its tlb with stale nmmu translations prior to the nmmu flush completing. Fixes: 1ab66d1fbada ("powerpc/powernv: Introduce address translation services for Nvlink2") Cc: stable@vger.kernel.org # v4.12+ Signed-off-by: Alistair Popple <alistair@popple.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
2017-09-01powerpc/iommu: Use permission-specific DEVICE_ATTR variantsJulia Lawall1-2/+1
Use DEVICE_ATTR_RW for read-write attributes. This simplifies the source code, improves readbility, and reduces the chance of inconsistencies. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
generated by cgit v1.2.3 (git 2.39.0) at 2025-10-03 18:51:09 +0300