summaryrefslogtreecommitdiff
path: root/arch
AgeCommit message (Collapse)AuthorFilesLines
2011-01-25Merge branch 'msm-sdcc' into for-nextDavid Brown5-5/+314
* msm-sdcc: msm: 8x50: Add initial support for SDCC mmc: msm_sdcc: Add gpio handling function to driver drivers: mmc: msm: remove clock disable in probe mmc: msm: fix dma usage not to use internal APIs
2011-01-24Merge branch 'msm-8960' into for-nextDavid Brown16-90/+582
* msm-8960: msm: Support for the MSM8960 RUMI3 target msm: Support for the MSM8960 Simulator target msm: Makefile cleanup msm: timer: Timer support for MSM8960 msm: Add MSM 8960 cpu_is check msm: irqs-8960: Interrupt map for MSM8960 msm: Physical offset for MSM8960 msm: io: I/O register definitions for MSM8960 msm: Generalize QGIC registers msm: Generalize timer register mappings msm: Add CPU queries
2011-01-24Merge branch 'msm-uart' into for-nextDavid Brown3-2/+7
* msm-uart: serial: msm: Add support for UARTDM cores msm: Add name field to UART resources
2011-01-24ARM: msm: 7x30: don't force a gpiomux table for the whole archDima Zavin3-39/+23
This is completely board specific and therefore must be provided on a per-board basis. Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: 8x50: Add initial support for SDCCSahitya Tummala4-5/+303
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
2011-01-22mmc: msm_sdcc: Add gpio handling function to driverSahitya Tummala1-0/+11
Configure SDCC GPIOs when the host is powered up or powered off. Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
2011-01-22msm: Add name field to UART resourcesStepan Moskovchenko3-2/+7
Add a name field to the I/O resources for the UARTs on MSM targets in preparation for updates to the msm_serial driver. The driver assumed there is one I/O resource per UART, which is not the case on all targets. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: Support for the MSM8960 RUMI3 targetStepan Moskovchenko2-1/+17
Add the machine record, init code, and build support for the MSM8960 RUMI3. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: Support for the MSM8960 Simulator targetStepan Moskovchenko3-0/+79
Add the board file, Kconfig options, and Makefile options needed to build for the MSM8960 Simulator target. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: Makefile cleanupStepan Moskovchenko1-12/+6
Clean up some of the conditionals in the Makefile in preparation for adding build support for MSM8960. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: timer: Timer support for MSM8960Stepan Moskovchenko1-2/+3
Modify the macros in the MSM timer driver to support the MSM8960 chip. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: Add MSM 8960 cpu_is checkDavid Brown1-0/+6
Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: irqs-8960: Interrupt map for MSM8960Stepan Moskovchenko2-0/+296
Add the interrupt map for the Qualcomm MSM8960 chip. This chip has an interrupt map that is different from previous targets. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: Physical offset for MSM8960Stepan Moskovchenko1-0/+2
Add the physical memory offset value for the Qualcomm MSM8960 chip. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: io: I/O register definitions for MSM8960Stepan Moskovchenko4-0/+65
Add the register address definitions for the basic hardware blocks on the Qualcomm MSM8960 chip. Signed-off-by: Stepan Moskovchenko <stepanm@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: Generalize QGIC registersDavid Brown3-8/+8
The QGIC registers are mapped to the same virtual addresses across targets, only the physical address changes. Move the BASE address out of target-specific files, and add a SOC name to the base addresses. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: Generalize timer register mappingsDavid Brown7-70/+55
Allow the timer register to be determined dynamically instead of at compile time. Use common virtual addresses for the registers across all MSM chips, and select the register mappings based on the detected CPU. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22msm: Add CPU queriesDavid Brown1-0/+48
Create runtime queries to distinguish the various MSM targets. Although these would probably be better named soc_is..., use cpu_is... to match convention in the rest of the kernel. Hard code the tests based on config options for now. When runtime device detection is implemented, these can be made dynamic. Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-22Merge branch 'fixes-2.6.38' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu * 'fixes-2.6.38' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: x86,percpu: Move out of place 64 bit ops into X86_64 section
2011-01-22Merge branch 'irq-cleanup-for-linus' of ↵Linus Torvalds31-912/+428
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (37 commits) um: Use generic irq Kconfig tile: Use generic irq Kconfig sparc: Use generic irq Kconfig score: Use generic irq Kconfig powerpc: Use generic irq Kconfig parisc: Use generic irq Kconfig mn10300: Use generic irq Kconfig microblaze: Use generic irq Kconfig m68knommu: Use generic irq Kconfig ia64: Use generic irq Kconfig frv: Use generic irq Kconfig blackfin: Use generic irq Kconfig alpha: Use generic irq Kconfig genirq: Remove __do_IRQ m32r: Convert to generic irq Kconfig m32r: Convert usrv platform irq handling m32r: Convert opsput_lcdpld irq chip m32r: Convert opsput lanpld irq chip m32r: Convert opsput pld irq chip m32r: Convert opsput irq chip ...
2011-01-22Merge branch 'stable/bug-fixes-rc1' of ↵Linus Torvalds2-2/+20
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/bug-fixes-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen: p2m: correctly initialize partial p2m leaf xen: fix non-ANSI function warning in irq.c
2011-01-22Merge branch 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds2-4/+4
* 'devicetree/merge' of git://git.secretlab.ca/git/linux-2.6: powerpc/83xx: fix build failures on dt compatible list.
2011-01-22Merge branch 'merge' of ↵Linus Torvalds34-344/+332
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc * 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: (34 commits) powerpc/mpic: Fix mask/unmask timeout message powerpc/pseries: Add BNX2=m to defconfig powerpc: Enable 64kB pages and 1024 threads in pseries config powerpc: Disable mcount tracers in pseries defconfig powerpc/boot/dts: Install dts from the right directory powerpc: machine_check_generic is wrong on 64bit powerpc: Check RTAS extended log flag before checking length powerpc: Fix corruption when grabbing FWNMI data powerpc: Rework pseries machine check handler powerpc: Don't silently handle machine checks from userspace powerpc: Remove duplicate debugger hook in machine_check_exception powerpc: Never halt RTAS error logging after receiving an unrecoverable machine check powerpc: Don't force MSR_RI in machine_check_exception powerpc: Print 32 bits of DSISR in show_regs powerpc/kdump: Disable ftrace during kexec powerpc/kdump: Move crash_kexec_stop_spus to kdump crash handler powerpc/kexec: Remove empty ppc_md.machine_kexec_prepare powerpc/kexec: Don't initialise kexec hooks to default handlers powerpc/kdump: Remove ppc_md.machine_crash_shutdown powerpc/kexec: Remove ppc_md.machine_kexec ...
2011-01-21xen: p2m: correctly initialize partial p2m leafStefan Bader1-1/+19
After changing the p2m mapping to a tree by commit 58e05027b530ff081ecea68e38de8d59db8f87e0 xen: convert p2m to a 3 level tree and trying to boot a DomU with 615MB of memory, the following crash was observed in the dump: kernel direct mapping tables up to 26f00000 @ 1ec4000-1fff000 BUG: unable to handle kernel NULL pointer dereference at (null) IP: [<c0107397>] xen_set_pte+0x27/0x60 *pdpt = 0000000000000000 *pde = 0000000000000000 Adding further debug statements showed that when trying to set up pfn=0x26700 the returned mapping was invalid. pfn=0x266ff calling set_pte(0xc1fe77f8, 0x6b3003) pfn=0x26700 calling set_pte(0xc1fe7800, 0x3) Although the last_pfn obtained from the startup info is 0x26700, which should in turn not be hit, the additional 8MB which are added as extra memory normally seem to be ok. This lead to looking into the initial p2m tree construction, which uses the smaller value and assuming that there is other code handling the extra memory. When the p2m tree is set up, the leaves are directly pointed to the array which the domain builder set up. But if the mapping is not on a boundary that fits into one p2m page, this will result in the last leaf being only partially valid. And as the invalid entries are not initialized in that case, things go badly wrong. I am trying to fix that by checking whether the current leaf is a complete map and if not, allocate a completely new page and copy only the valid pointers there. This may not be the most efficient or elegant solution, but at least it seems to allow me booting DomUs with memory assignments all over the range. BugLink: http://bugs.launchpad.net/bugs/686692 [v2: Redid a bit of commit wording and fixed a compile warning] Signed-off-by: Stefan Bader <stefan.bader@canonical.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2011-01-21um: Use generic irq KconfigThomas Gleixner1-5/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jeff Dike <jdike@addtoit.com>
2011-01-21tile: Use generic irq KconfigThomas Gleixner1-29/+21
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Chris Metcalf <cmetcalf@tilera.com>
2011-01-21sparc: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: "David S. Miller" <davem@davemloft.net>
2011-01-21score: Use generic irq KconfigThomas Gleixner1-3/+4
No functional change Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Chen Liqin <liqin.chen@sunplusct.com>
2011-01-21powerpc: Use generic irq KconfigThomas Gleixner1-21/+3
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
2011-01-21parisc: Use generic irq KconfigThomas Gleixner1-10/+4
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2011-01-21mn10300: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Howells <dhowells@redhat.com>
2011-01-21microblaze: Use generic irq KconfigThomas Gleixner1-6/+2
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michal Simek <monstr@monstr.eu>
2011-01-21m68knommu: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Greg Ungerer <gerg@uclinux.org>
2011-01-21ia64: Use generic irq KconfigThomas Gleixner1-19/+4
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Tony Luck <tony.luck@intel.com>
2011-01-21frv: Use generic irq KconfigThomas Gleixner1-4/+1
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: David Howells <dhowells@redhat.com>
2011-01-21blackfin: Use generic irq KconfigThomas Gleixner1-11/+3
No functional change. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Mike Frysinger <vapier@gentoo.org>
2011-01-21alpha: Use generic irq KconfigThomas Gleixner1-13/+3
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Henderson <rth@twiddle.net>
2011-01-21genirq: Remove __do_IRQThomas Gleixner14-47/+0
All architectures are finally converted. Remove the cruft. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Richard Henderson <rth@twiddle.net> Cc: Mike Frysinger <vapier@gentoo.org> Cc: David Howells <dhowells@redhat.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Greg Ungerer <gerg@uclinux.org> Cc: Michal Simek <monstr@monstr.eu> Acked-by: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Chen Liqin <liqin.chen@sunplusct.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Jeff Dike <jdike@addtoit.com>
2011-01-21m32r: Convert to generic irq KconfigThomas Gleixner1-8/+3
Use the generic irq Kconfig. Select GENERIC_HARDIRQS_NO_DEPRECATED as we have converted all irq_chip functions. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert usrv platform irq handlingThomas Gleixner1-48/+40
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput_lcdpld irq chipThomas Gleixner1-26/+16
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput lanpld irq chipThomas Gleixner1-20/+12
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput pld irq chipThomas Gleixner1-26/+20
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert opsput irq chipThomas Gleixner1-31/+27
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert oaks32r irq chipsThomas Gleixner1-25/+22
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert mappi3 irq chipThomas Gleixner1-31/+31
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert mappi2 irq chipThomas Gleixner1-29/+30
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert mappi irq chipsThomas Gleixner1-27/+26
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32700ut lcdpld irq chipThomas Gleixner1-20/+12
Convert the irq chip to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
2011-01-21m32r: Convert m32700ut lanpld irq chipThomas Gleixner1-20/+12
Convert the irq chips to the new functions and use proper flow handlers. handle_level_irq is appropriate. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.0) at 2025-08-26 18:53:51 +0300