| Age | Commit message (Collapse) | Author | Files | Lines |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool fix from Thomas Gleixner:
"A single objtool fix to handle the PUSHF/POPF validation correctly for
the paravirt changes which modified arch_local_irq_restore not to use
popf"
* tag 'objtool-urgent-2021-03-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool,x86: Fix uaccess PUSHF/POPF validation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull perf fixes from Borislav Petkov:
- Make sure PMU internal buffers are flushed for per-CPU events too and
properly handle PID/TID for large PEBS.
- Handle the case properly when there's no PMU and therefore return an
empty list of perf MSRs for VMX to switch instead of reading random
garbage from the stack.
* tag 'perf_urgent_for_v5.12-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/perf: Use RET0 as default for guest_get_msrs to handle "no PMU" case
perf/x86/intel: Set PERF_ATTACH_SCHED_CB for large PEBS and LBR
perf/core: Flush PMU internal buffers for per-CPU events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Borislav Petkov:
- A couple of SEV-ES fixes and robustifications: verify usermode stack
pointer in NMI is not coming from the syscall gap, correctly track
IRQ states in the #VC handler and access user insn bytes atomically
in same handler as latter cannot sleep.
- Balance 32-bit fast syscall exit path to do the proper work on exit
and thus not confuse audit and ptrace frameworks.
- Two fixes for the ORC unwinder going "off the rails" into KASAN
redzones and when ORC data is missing.
* tag 'x86_urgent_for_v5.12_rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sev-es: Use __copy_from_user_inatomic()
x86/sev-es: Correctly track IRQ states in runtime #VC handler
x86/sev-es: Check regs->sp is trusted before adjusting #VC IST stack
x86/sev-es: Introduce ip_within_syscall_gap() helper
x86/entry: Fix entry/exit mismatch on failed fast 32-bit syscalls
x86/unwind/orc: Silence warnings caused by missing ORC data
x86/unwind/orc: Disable KASAN checking in the ORC unwinder, part 2
|
|
Pull KVM fixes from Paolo Bonzini:
"More fixes for ARM and x86"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: LAPIC: Advancing the timer expiration on guest initiated write
KVM: x86/mmu: Skip !MMU-present SPTEs when removing SP in exclusive mode
KVM: kvmclock: Fix vCPUs > 64 can't be online/hotpluged
kvm: x86: annotate RCU pointers
KVM: arm64: Fix exclusive limit for IPA size
KVM: arm64: Reject VM creation when the default IPA size is unsupported
KVM: arm64: Ensure I-cache isolation between vcpus of a same VM
KVM: arm64: Don't use cbz/adr with external symbols
KVM: arm64: Fix range alignment when walking page tables
KVM: arm64: Workaround firmware wrongly advertising GICv2-on-v3 compatibility
KVM: arm64: Rename __vgic_v3_get_ich_vtr_el2() to __vgic_v3_get_gic_config()
KVM: arm64: Don't access PMSELR_EL0/PMUSERENR_EL0 when no PMU is available
KVM: arm64: Turn kvm_arm_support_pmu_v3() into a static key
KVM: arm64: Fix nVHE hyp panic host context restore
KVM: arm64: Avoid corrupting vCPU context register in guest exit
KVM: arm64: nvhe: Save the SPE context early
kvm: x86: use NULL instead of using plain integer as pointer
KVM: SVM: Connect 'npt' module param to KVM's internal 'npt_enabled'
KVM: x86: Ensure deadline timer has truly expired before posting its IRQ
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two fix series and a single cleanup:
- a small cleanup patch to remove unneeded symbol exports
- a series to cleanup Xen grant handling (avoiding allocations in
some cases, and using common defines for "invalid" values)
- a series to address a race issue in Xen event channel handling"
* tag 'for-linus-5.12b-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
Xen/gntdev: don't needlessly use kvcalloc()
Xen/gnttab: introduce common INVALID_GRANT_{HANDLE,REF}
Xen/gntdev: don't needlessly allocate k{,un}map_ops[]
Xen: drop exports of {set,clear}_foreign_p2m_mapping()
xen/events: avoid handling the same event on two cpus at the same time
xen/events: don't unmask an event channel when an eoi is pending
xen/events: reset affinity of 2-level event when tearing it down
|
|
Advancing the timer expiration should only be necessary on guest initiated
writes. When we cancel the timer and clear .pending during state restore,
clear expired_tscdeadline as well.
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1614818118-965-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
If mmu_lock is held for write, don't bother setting !PRESENT SPTEs to
REMOVED_SPTE when recursively zapping SPTEs as part of shadow page
removal. The concurrent write protections provided by REMOVED_SPTE are
not needed, there are no backing page side effects to record, and MMIO
SPTEs can be left as is since they are protected by the memslot
generation, not by ensuring that the MMIO SPTE is unreachable (which
is racy with respect to lockless walks regardless of zapping behavior).
Skipping !PRESENT drastically reduces the number of updates needed to
tear down sparsely populated MMUs, e.g. when tearing down a 6gb VM that
didn't touch much memory, 6929/7168 (~96.6%) of SPTEs were '0' and could
be skipped.
Avoiding the write itself is likely close to a wash, but avoiding
__handle_changed_spte() is a clear-cut win as that involves saving and
restoring all non-volatile GPRs (it's a subtly big function), as well as
several conditional branches before bailing out.
Cc: Ben Gardon <bgardon@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210310003029.1250571-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
# lscpu
Architecture: x86_64
CPU op-mode(s): 32-bit, 64-bit
Byte Order: Little Endian
CPU(s): 88
On-line CPU(s) list: 0-63
Off-line CPU(s) list: 64-87
# cat /proc/cmdline
BOOT_IMAGE=/vmlinuz-5.10.0-rc3-tlinux2-0050+ root=/dev/mapper/cl-root ro
rd.lvm.lv=cl/root rhgb quiet console=ttyS0 LANG=en_US .UTF-8 no-kvmclock-vsyscall
# echo 1 > /sys/devices/system/cpu/cpu76/online
-bash: echo: write error: Cannot allocate memory
The per-cpu vsyscall pvclock data pointer assigns either an element of the
static array hv_clock_boot (#vCPU <= 64) or dynamically allocated memory
hvclock_mem (vCPU > 64), the dynamically memory will not be allocated if
kvmclock vsyscall is disabled, this can result in cpu hotpluged fails in
kvmclock_setup_percpu() which returns -ENOMEM. It's broken for no-vsyscall
and sometimes you end up with vsyscall disabled if the host does something
strange. This patch fixes it by allocating this dynamically memory
unconditionally even if vsyscall is disabled.
Fixes: 6a1cac56f4 ("x86/kvm: Use __bss_decrypted attribute in shared variables")
Reported-by: Zelin Deng <zelin.deng@linux.alibaba.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: stable@vger.kernel.org#v4.19-rc5+
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1614130683-24137-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This patch adds the annotation to fix the following sparse errors:
arch/x86/kvm//x86.c:8147:15: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//x86.c:8147:15: struct kvm_apic_map [noderef] __rcu *
arch/x86/kvm//x86.c:8147:15: struct kvm_apic_map *
arch/x86/kvm//x86.c:10628:16: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//x86.c:10628:16: struct kvm_apic_map [noderef] __rcu *
arch/x86/kvm//x86.c:10628:16: struct kvm_apic_map *
arch/x86/kvm//x86.c:10629:15: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//x86.c:10629:15: struct kvm_pmu_event_filter [noderef] __rcu *
arch/x86/kvm//x86.c:10629:15: struct kvm_pmu_event_filter *
arch/x86/kvm//lapic.c:267:15: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//lapic.c:267:15: struct kvm_apic_map [noderef] __rcu *
arch/x86/kvm//lapic.c:267:15: struct kvm_apic_map *
arch/x86/kvm//lapic.c:269:9: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//lapic.c:269:9: struct kvm_apic_map [noderef] __rcu *
arch/x86/kvm//lapic.c:269:9: struct kvm_apic_map *
arch/x86/kvm//lapic.c:637:15: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//lapic.c:637:15: struct kvm_apic_map [noderef] __rcu *
arch/x86/kvm//lapic.c:637:15: struct kvm_apic_map *
arch/x86/kvm//lapic.c:994:15: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//lapic.c:994:15: struct kvm_apic_map [noderef] __rcu *
arch/x86/kvm//lapic.c:994:15: struct kvm_apic_map *
arch/x86/kvm//lapic.c:1036:15: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//lapic.c:1036:15: struct kvm_apic_map [noderef] __rcu *
arch/x86/kvm//lapic.c:1036:15: struct kvm_apic_map *
arch/x86/kvm//lapic.c:1173:15: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//lapic.c:1173:15: struct kvm_apic_map [noderef] __rcu *
arch/x86/kvm//lapic.c:1173:15: struct kvm_apic_map *
arch/x86/kvm//pmu.c:190:18: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//pmu.c:190:18: struct kvm_pmu_event_filter [noderef] __rcu *
arch/x86/kvm//pmu.c:190:18: struct kvm_pmu_event_filter *
arch/x86/kvm//pmu.c:251:18: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//pmu.c:251:18: struct kvm_pmu_event_filter [noderef] __rcu *
arch/x86/kvm//pmu.c:251:18: struct kvm_pmu_event_filter *
arch/x86/kvm//pmu.c:522:18: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//pmu.c:522:18: struct kvm_pmu_event_filter [noderef] __rcu *
arch/x86/kvm//pmu.c:522:18: struct kvm_pmu_event_filter *
arch/x86/kvm//pmu.c:522:18: error: incompatible types in comparison expression (different address spaces):
arch/x86/kvm//pmu.c:522:18: struct kvm_pmu_event_filter [noderef] __rcu *
arch/x86/kvm//pmu.c:522:18: struct kvm_pmu_event_filter *
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Message-Id: <20210305191123.GA497469@LEGION>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Commit ab234a260b1f ("x86/pv: Rework arch_local_irq_restore() to not
use popf") replaced "push %reg; popf" with something like: "test
$0x200, %reg; jz 1f; sti; 1:", which breaks the pushf/popf symmetry
that commit ea24213d8088 ("objtool: Add UACCESS validation") relies
on.
The result is:
drivers/gpu/drm/amd/amdgpu/si.o: warning: objtool: si_common_hw_init()+0xf36: PUSHF stack exhausted
Meanwhile, commit c9c324dc22aa ("objtool: Support stack layout changes
in alternatives") makes that we can actually use stack-ops in
alternatives, which means we can revert 1ff865e343c2 ("x86,smap: Fix
smap_{save,restore}() alternatives").
That in turn means we can limit the PUSHF/POPF handling of
ea24213d8088 to those instructions that are in alternatives.
Fixes: ab234a260b1f ("x86/pv: Rework arch_local_irq_restore() to not use popf")
Reported-by: Borislav Petkov <bp@alien8.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Link: https://lkml.kernel.org/r/YEY4rIbQYa5fnnEp@hirez.programming.kicks-ass.net
|
|
It's not helpful if every driver has to cook its own. Generalize
xenbus'es INVALID_GRANT_HANDLE and pcifront's INVALID_GRANT_REF (which
shouldn't have expanded to zero to begin with). Use the constants in
p2m.c and gntdev.c right away, and update field types where necessary so
they would match with the constants' types (albeit without touching
struct ioctl_gntdev_grant_ref's ref field, as that's part of the public
interface of the kernel and would require introducing a dependency on
Xen's grant_table.h public header).
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/db7c38a5-0d75-d5d1-19de-e5fe9f0b9c48@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
They're only used internally, and the layering violation they contain
(x86) or imply (Arm) of calling HYPERVISOR_grant_table_op() strongly
advise against any (uncontrolled) use from a module. The functions also
never had users except the ones from drivers/xen/grant-table.c forever
since their introduction in 3.15.
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Link: https://lore.kernel.org/r/746a5cd6-1446-eda4-8b23-03c1cac30b8d@suse.com
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
|
|
Initialize x86_pmu.guest_get_msrs to return 0/NULL to handle the "nop"
case. Patching in perf_guest_get_msrs_nop() during setup does not work
if there is no PMU, as setup bails before updating the static calls,
leaving x86_pmu.guest_get_msrs NULL and thus a complete nop. Ultimately,
this causes VMX abort on VM-Exit due to KVM putting random garbage from
the stack into the MSR load list.
Add a comment in KVM to note that nr_msrs is valid if and only if the
return value is non-NULL.
Fixes: abd562df94d1 ("x86/perf: Use static_call for x86_pmu.guest_get_msrs")
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reported-by: syzbot+cce9ef2dd25246f815ee@syzkaller.appspotmail.com
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20210309171019.1125243-1-seanjc@google.com
|
|
Pull networking fixes from David Miller:
1) Fix transmissions in dynamic SMPS mode in ath9k, from Felix Fietkau.
2) TX skb error handling fix in mt76 driver, also from Felix.
3) Fix BPF_FETCH atomic in x86 JIT, from Brendan Jackman.
4) Avoid double free of percpu pointers when freeing a cloned bpf prog.
From Cong Wang.
5) Use correct printf format for dma_addr_t in ath11k, from Geert
Uytterhoeven.
6) Fix resolve_btfids build with older toolchains, from Kun-Chuan
Hsieh.
7) Don't report truncated frames to mac80211 in mt76 driver, from
Lorenzop Bianconi.
8) Fix watcdog timeout on suspend/resume of stmmac, from Joakim Zhang.
9) mscc ocelot needs NET_DEVLINK selct in Kconfig, from Arnd Bergmann.
10) Fix sign comparison bug in TCP_ZEROCOPY_RECEIVE getsockopt(), from
Arjun Roy.
11) Ignore routes with deleted nexthop object in mlxsw, from Ido
Schimmel.
12) Need to undo tcp early demux lookup sometimes in nf_nat, from
Florian Westphal.
13) Fix gro aggregation for udp encaps with zero csum, from Daniel
Borkmann.
14) Make sure to always use imp*_ndo_send when necessaey, from Jason A.
Donenfeld.
15) Fix TRSCER masks in sh_eth driver from Sergey Shtylyov.
16) prevent overly huge skb allocationsd in qrtr, from Pavel Skripkin.
17) Prevent rx ring copnsumer index loss of sync in enetc, from Vladimir
Oltean.
18) Make sure textsearch copntrol block is large enough, from Wilem de
Bruijn.
19) Revert MAC changes to r8152 leading to instability, from Hates Wang.
20) Advance iov in 9p even for empty reads, from Jissheng Zhang.
21) Double hook unregister in nftables, from PabloNeira Ayuso.
22) Fix memleak in ixgbe, fropm Dinghao Liu.
23) Avoid dups in pkt scheduler class dumps, from Maximilian Heyne.
24) Various mptcp fixes from Florian Westphal, Paolo Abeni, and Geliang
Tang.
25) Fix DOI refcount bugs in cipso, from Paul Moore.
26) One too many irqsave in ibmvnic, from Junlin Yang.
27) Fix infinite loop with MPLS gso segmenting via virtio_net, from
Balazs Nemeth.
* git://git.kernel.org:/pub/scm/linux/kernel/git/netdev/net: (164 commits)
s390/qeth: fix notification for pending buffers during teardown
s390/qeth: schedule TX NAPI on QAOB completion
s390/qeth: improve completion of pending TX buffers
s390/qeth: fix memory leak after failed TX Buffer allocation
net: avoid infinite loop in mpls_gso_segment when mpls_hlen == 0
net: check if protocol extracted by virtio_net_hdr_set_proto is correct
net: dsa: xrs700x: check if partner is same as port in hsr join
net: lapbether: Remove netif_start_queue / netif_stop_queue
atm: idt77252: fix null-ptr-dereference
atm: uPD98402: fix incorrect allocation
atm: fix a typo in the struct description
net: qrtr: fix error return code of qrtr_sendmsg()
mptcp: fix length of ADD_ADDR with port sub-option
net: bonding: fix error return code of bond_neigh_init()
net: enetc: allow hardware timestamping on TX queues with tc-etf enabled
net: enetc: set MAC RX FIFO to recommended value
net: davicom: Use platform_get_irq_optional()
net: davicom: Fix regulator not turned off on driver removal
net: davicom: Fix regulator not turned off on failed probe
net: dsa: fix switchdev objects on bridge master mistakenly being applied on ports
...
|
|
The #VC handler must run in atomic context and cannot sleep. This is a
problem when it tries to fetch instruction bytes from user-space via
copy_from_user().
Introduce a insn_fetch_from_user_inatomic() helper which uses
__copy_from_user_inatomic() to safely copy the instruction bytes to
kernel memory in the #VC handler.
Fixes: 5e3427a7bc432 ("x86/sev-es: Handle instruction fetches from user-space")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # v5.10+
Link: https://lkml.kernel.org/r/20210303141716.29223-6-joro@8bytes.org
|
|
Call irqentry_nmi_enter()/irqentry_nmi_exit() in the #VC handler to
correctly track the IRQ state during its execution.
Fixes: 0786138c78e79 ("x86/sev-es: Add a Runtime #VC Exception Handler")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # v5.10+
Link: https://lkml.kernel.org/r/20210303141716.29223-5-joro@8bytes.org
|
|
The code in the NMI handler to adjust the #VC handler IST stack is
needed in case an NMI hits when the #VC handler is still using its IST
stack.
But the check for this condition also needs to look if the regs->sp
value is trusted, meaning it was not set by user-space. Extend the check
to not use regs->sp when the NMI interrupted user-space code or the
SYSCALL gap.
Fixes: 315562c9af3d5 ("x86/sev-es: Adjust #VC IST Stack on entering NMI handler")
Reported-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # 5.10+
Link: https://lkml.kernel.org/r/20210303141716.29223-3-joro@8bytes.org
|
|
Introduce a helper to check whether an exception came from the syscall
gap and use it in the SEV-ES code. Extend the check to also cover the
compatibility SYSCALL entry path.
Fixes: 315562c9af3d5 ("x86/sev-es: Adjust #VC IST Stack on entering NMI handler")
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org # 5.10+
Link: https://lkml.kernel.org/r/20210303141716.29223-2-joro@8bytes.org
|
|
On a 32-bit fast syscall that fails to read its arguments from user
memory, the kernel currently does syscall exit work but not
syscall entry work. This confuses audit and ptrace. For example:
$ ./tools/testing/selftests/x86/syscall_arg_fault_32
...
strace: pid 264258: entering, ptrace_syscall_info.op == 2
...
This is a minimal fix intended for ease of backporting. A more
complete cleanup is coming.
Fixes: 0b085e68f407 ("x86/entry: Consolidate 32/64 bit syscall entry")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/8c82296ddf803b91f8d1e5eac89e5803ba54ab0e.1614884673.git.luto@kernel.org
|
|
The ORC unwinder attempts to fall back to frame pointers when ORC data
is missing for a given instruction. It sets state->error, but then
tries to keep going as a best-effort type of thing. That may result in
further warnings if the unwinder gets lost.
Until we have some way to register generated code with the unwinder,
missing ORC will be expected, and occasionally going off the rails will
also be expected. So don't warn about it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Tested-by: Ivan Babrou <ivan@cloudflare.com>
Link: https://lkml.kernel.org/r/06d02c4bbb220bd31668db579278b0352538efbb.1612534649.git.jpoimboe@redhat.com
|
|
KASAN reserves "redzone" areas between stack frames in order to detect
stack overruns. A read or write to such an area triggers a KASAN
"stack-out-of-bounds" BUG.
Normally, the ORC unwinder stays in-bounds and doesn't access the
redzone. But sometimes it can't find ORC metadata for a given
instruction. This can happen for code which is missing ORC metadata, or
for generated code. In such cases, the unwinder attempts to fall back
to frame pointers, as a best-effort type thing.
This fallback often works, but when it doesn't, the unwinder can get
confused and go off into the weeds into the KASAN redzone, triggering
the aforementioned KASAN BUG.
But in this case, the unwinder's confusion is actually harmless and
working as designed. It already has checks in place to prevent
off-stack accesses, but those checks get short-circuited by the KASAN
BUG. And a BUG is a lot more disruptive than a harmless unwinder
warning.
Disable the KASAN checks by using READ_ONCE_NOCHECK() for all stack
accesses. This finishes the job started by commit 881125bfe65b
("x86/unwind: Disable KASAN checking in the ORC unwinder"), which only
partially fixed the issue.
Fixes: ee9f8fce9964 ("x86/unwind: Add the ORC unwinder")
Reported-by: Ivan Babrou <ivan@cloudflare.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Tested-by: Ivan Babrou <ivan@cloudflare.com>
Cc: stable@kernel.org
Link: https://lkml.kernel.org/r/9583327904ebbbeda399eca9c56d6c7085ac20fe.1612534649.git.jpoimboe@redhat.com
|
|
To supply a PID/TID for large PEBS, it requires flushing the PEBS buffer
in a context switch.
For normal LBRs, a context switch can flip the address space and LBR
entries are not tagged with an identifier, we need to wipe the LBR, even
for per-cpu events.
For LBR callstack, save/restore the stack is required during a context
switch.
Set PERF_ATTACH_SCHED_CB for the event with large PEBS & LBR.
Fixes: 9c964efa4330 ("perf/x86/intel: Drain the PEBS buffer during context switches")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lkml.kernel.org/r/20201130193842.10569-2-kan.liang@linux.intel.com
|
|
Sparse warnings removed:
warning: Using plain integer as NULL pointer
Signed-off-by: Muhammad Usama Anjum <musamaanjum@gmail.com>
Message-Id: <20210305180816.GA488770@LEGION>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Directly connect the 'npt' param to the 'npt_enabled' variable so that
runtime adjustments to npt_enabled are reflected in sysfs. Move the
!PAE restriction to a runtime check to ensure NPT is forced off if the
host is using 2-level paging, and add a comment explicitly stating why
NPT requires a 64-bit kernel or a kernel with PAE enabled.
Opportunistically switch the param to octal permissions.
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305021637.3768573-1-seanjc@google.com>
Reviewed-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When posting a deadline timer interrupt, open code the checks guarding
__kvm_wait_lapic_expire() in order to skip the lapic_timer_int_injected()
check in kvm_wait_lapic_expire(). The injection check will always fail
since the interrupt has not yet be injected. Moving the call after
injection would also be wrong as that wouldn't actually delay delivery
of the IRQ if it is indeed sent via posted interrupt.
Fixes: 010fd37fddf6 ("KVM: LAPIC: Reduce world switch latency caused by timer_advance_ns")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210305021808.3769732-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull KVM fixes from Paolo Bonzini:
- Doc fixes
- selftests fixes
- Add runstate information to the new Xen support
- Allow compiling out the Xen interface
- 32-bit PAE without EPT bugfix
- NULL pointer dereference bugfix
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
KVM: SVM: Clear the CR4 register on reset
KVM: x86/xen: Add support for vCPU runstate information
KVM: x86/xen: Fix return code when clearing vcpu_info and vcpu_time_info
selftests: kvm: Mmap the entire vcpu mmap area
KVM: Documentation: Fix index for KVM_CAP_PPC_DAWR1
KVM: x86: allow compiling out the Xen hypercall interface
KVM: xen: flush deferred static key before checking it
KVM: x86/mmu: Set SPTE_AD_WRPROT_ONLY_MASK if and only if PML is enabled
KVM: x86: hyper-v: Fix Hyper-V context null-ptr-deref
KVM: x86: remove misplaced comment on active_mmu_pages
KVM: Documentation: rectify rst markup in kvm_run->flags
Documentation: kvm: fix messy conversion from .txt to .rst
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Two security issues (XSA-367 and XSA-369)"
* tag 'for-linus-5.12b-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen: fix p2m size in dom0 for disabled memory hotplug case
xen-netback: respect gnttab_map_refs()'s return value
Xen/gnttab: handle p2m update errors on a per-slot basis
|
|
Since commit 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated
memory") foreign mappings are using guest physical addresses allocated
via ZONE_DEVICE functionality.
This will result in problems for the case of no balloon memory hotplug
being configured, as the p2m list will only cover the initial memory
size of the domain. Any ZONE_DEVICE allocated address will be outside
the p2m range and thus a mapping can't be established with that memory
address.
Fix that by extending the p2m size for that case. At the same time add
a check for a to be created mapping to be within the p2m limits in
order to detect errors early.
While changing a comment, remove some 32-bit leftovers.
This is XSA-369.
Fixes: 9e2369c06c8a18 ("xen: add helpers to allocate unpopulated memory")
Cc: <stable@vger.kernel.org> # 5.9
Reported-by: Marek Marczykowski-Górecki <marmarek@invisiblethingslab.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
Bailing immediately from set_foreign_p2m_mapping() upon a p2m updating
error leaves the full batch in an ambiguous state as far as the caller
is concerned. Instead flags respective slots as bad, unmapping what
was mapped there right away.
HYPERVISOR_grant_table_op()'s return value and the individual unmap
slots' status fields get used only for a one-time - there's not much we
can do in case of a failure.
Note that there's no GNTST_enomem or alike, so GNTST_general_error gets
used.
The map ops' handle fields get overwritten just to be on the safe side.
This is part of XSA-367.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Link: https://lore.kernel.org/r/96cccf5d-e756-5f53-b91a-ea269bfb9be0@suse.com
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
This problem was reported on a SVM guest while executing kexec.
Kexec fails to load the new kernel when the PCID feature is enabled.
When kexec starts loading the new kernel, it starts the process by
resetting the vCPU's and then bringing each vCPU online one by one.
The vCPU reset is supposed to reset all the register states before the
vCPUs are brought online. However, the CR4 register is not reset during
this process. If this register is already setup during the last boot,
all the flags can remain intact. The X86_CR4_PCIDE bit can only be
enabled in long mode. So, it must be enabled much later in SMP
initialization. Having the X86_CR4_PCIDE bit set during SMP boot can
cause a boot failures.
Fix the issue by resetting the CR4 register in init_vmcb().
Signed-off-by: Babu Moger <babu.moger@amd.com>
Message-Id: <161471109108.30811.6392805173629704166.stgit@bmoger-ubuntu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is how Xen guests do steal time accounting. The hypervisor records
the amount of time spent in each of running/runnable/blocked/offline
states.
In the Xen accounting, a vCPU is still in state RUNSTATE_running while
in Xen for a hypercall or I/O trap, etc. Only if Xen explicitly schedules
does the state become RUNSTATE_blocked. In KVM this means that even when
the vCPU exits the kvm_run loop, the state remains RUNSTATE_running.
The VMM can explicitly set the vCPU to RUNSTATE_blocked by using the
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT attribute, and can also use
KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST to retrospectively add a given
amount of time to the blocked state and subtract it from the running
state.
The state_entry_time corresponds to get_kvmclock_ns() at the time the
vCPU entered the current state, and the total times of all four states
should always add up to state_entry_time.
Co-developed-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: Joao Martins <joao.m.martins@oracle.com>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-2-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When clearing the per-vCPU shared regions, set the return value to zero
to indicate success. This was causing spurious errors to be returned to
userspace on soft reset.
Also add a paranoid BUILD_BUG_ON() for compat structure compatibility.
Fixes: 0c165b3c01fe ("KVM: x86/xen: Allow reset of Xen attributes")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <20210301125309.874953-1-dwmw2@infradead.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The Xen hypercall interface adds to the attack surface of the hypervisor
and will be used quite rarely. Allow compiling it out.
Suggested-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Pull io_uring thread rewrite from Jens Axboe:
"This converts the io-wq workers to be forked off the tasks in question
instead of being kernel threads that assume various bits of the
original task identity.
This kills > 400 lines of code from io_uring/io-wq, and it's the worst
part of the code. We've had several bugs in this area, and the worry
is always that we could be missing some pieces for file types doing
unusual things (recent /dev/tty example comes to mind, userfaultfd
reads installing file descriptors is another fun one... - both of
which need special handling, and I bet it's not the last weird oddity
we'll find).
With these identical workers, we can have full confidence that we're
never missing anything. That, in itself, is a huge win. Outside of
that, it's also more efficient since we're not wasting space and code
on tracking state, or switching between different states.
I'm sure we're going to find little things to patch up after this
series, but testing has been pretty thorough, from the usual
regression suite to production. Any issue that may crop up should be
manageable.
There's also a nice series of further reductions we can do on top of
this, but I wanted to get the meat of it out sooner rather than later.
The general worry here isn't that it's fundamentally broken. Most of
the little issues we've found over the last week have been related to
just changes in how thread startup/exit is done, since that's the main
difference between using kthreads and these kinds of threads. In fact,
if all goes according to plan, I want to get this into the 5.10 and
5.11 stable branches as well.
That said, the changes outside of io_uring/io-wq are:
- arch setup, simple one-liner to each arch copy_thread()
implementation.
- Removal of net and proc restrictions for io_uring, they are no
longer needed or useful"
* tag 'io_uring-worker.v3-2021-02-25' of git://git.kernel.dk/linux-block: (30 commits)
io-wq: remove now unused IO_WQ_BIT_ERROR
io_uring: fix SQPOLL thread handling over exec
io-wq: improve manager/worker handling over exec
io_uring: ensure SQPOLL startup is triggered before error shutdown
io-wq: make buffered file write hashed work map per-ctx
io-wq: fix race around io_worker grabbing
io-wq: fix races around manager/worker creation and task exit
io_uring: ensure io-wq context is always destroyed for tasks
arch: ensure parisc/powerpc handle PF_IO_WORKER in copy_thread()
io_uring: cleanup ->user usage
io-wq: remove nr_process accounting
io_uring: flag new native workers with IORING_FEAT_NATIVE_WORKERS
net: remove cmsg restriction from io_uring based send/recvmsg calls
Revert "proc: don't allow async path resolution of /proc/self components"
Revert "proc: don't allow async path resolution of /proc/thread-self components"
io_uring: move SQPOLL thread io-wq forked worker
io-wq: make io_wq_fork_thread() available to other users
io-wq: only remove worker from free_list, if it was there
io_uring: remove io_identity
io_uring: remove any grabbing of context
...
|
|
Alexei Starovoitov says:
====================
pull-request: bpf 2021-02-26
1) Fix for bpf atomic insns with src_reg=r0, from Brendan.
2) Fix use after free due to bpf_prog_clone, from Cong.
3) Drop imprecise verifier log message, from Dmitrii.
4) Remove incorrect blank line in bpf helper description, from Hangbin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: No need to drop the packet when there is no geneve opt
bpf: Remove blank line in bpf helper description comment
tools/resolve_btfids: Fix build error with older host toolchains
selftests/bpf: Fix a compiler warning in global func test
bpf: Drop imprecise log message
bpf: Clear percpu pointers in bpf_prog_clone_free()
bpf: Fix a warning message in mark_ptr_not_null_reg()
bpf, x86: Fix BPF_FETCH atomic and/or/xor with r0 as src
====================
Link: https://lore.kernel.org/r/20210226193737.57004-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Pull more KVM updates from Paolo Bonzini:
"x86:
- take into account HVA before retrying on MMU notifier race
- fixes for nested AMD guests without NPT
- allow INVPCID in guest without PCID
- disable PML in hardware when not in use
- MMU code cleanups:
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (28 commits)
KVM: SVM: Fix nested VM-Exit on #GP interception handling
KVM: vmx/pmu: Fix dummy check if lbr_desc->event is created
KVM: x86/mmu: Consider the hva in mmu_notifier retry
KVM: x86/mmu: Skip mmu_notifier check when handling MMIO page fault
KVM: Documentation: rectify rst markup in KVM_GET_SUPPORTED_HV_CPUID
KVM: nSVM: prepare guest save area while is_guest_mode is true
KVM: x86/mmu: Remove a variety of unnecessary exports
KVM: x86: Fold "write-protect large" use case into generic write-protect
KVM: x86/mmu: Don't set dirty bits when disabling dirty logging w/ PML
KVM: VMX: Dynamically enable/disable PML based on memslot dirty logging
KVM: x86: Further clarify the logic and comments for toggling log dirty
KVM: x86: Move MMU's PML logic to common code
KVM: x86/mmu: Make dirty log size hook (PML) a value, not a function
KVM: x86/mmu: Expand on the comment in kvm_vcpu_ad_need_write_protect()
KVM: nVMX: Disable PML in hardware when running L2
KVM: x86/mmu: Consult max mapping level when zapping collapsible SPTEs
KVM: x86/mmu: Pass the memslot to the rmap callbacks
KVM: x86/mmu: Split out max mapping level calculation to helper
KVM: x86/mmu: Expand collapsible SPTE zap for TDP MMU to ZONE_DEVICE and HugeTLB pages
KVM: nVMX: no need to undo inject_page_fault change on nested vmexit
...
|
|
The memtype seq_file iterator allocates a buffer in the ->start and ->next
functions and frees it in the ->show function. The preferred handling for
such resources is to free them in the subsequent ->next or ->stop function
call.
Since Commit 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration
code and interface") there is no guarantee that ->show will be called
after ->next, so this function can now leak memory.
So move the freeing of the buffer to ->next and ->stop.
Link: https://lkml.kernel.org/r/161248539022.21478.13874455485854739066.stgit@noble1
Fixes: 1f4aace60b0e ("fs/seq_file.c: simplify seq_file iteration code and interface")
Signed-off-by: NeilBrown <neilb@suse.de>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add KFENCE test suite, testing various error detection scenarios. Makes
use of KUnit for test organization. Since KFENCE's interface to obtain
error reports is via the console, the test verifies that KFENCE outputs
expected reports to the console.
[elver@google.com: fix typo in test]
Link: https://lkml.kernel.org/r/X9lHQExmHGvETxY4@elver.google.com
[elver@google.com: show access type in report]
Link: https://lkml.kernel.org/r/20210111091544.3287013-2-elver@google.com
Link: https://lkml.kernel.org/r/20201103175841.3495947-9-elver@google.com
Signed-off-by: Alexander Potapenko <glider@google.com>
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Co-developed-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Instead of removing the fault handling portion of the stack trace based on
the fault handler's name, just use struct pt_regs directly.
Change kfence_handle_page_fault() to take a struct pt_regs, and plumb it
through to kfence_report_error() for out-of-bounds, use-after-free, or
invalid access errors, where pt_regs is used to generate the stack trace.
If the kernel is a DEBUG_KERNEL, also show registers for more information.
Link: https://lkml.kernel.org/r/20201105092133.2075331-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Suggested-by: Mark Rutland <mark.rutland@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Jann Horn <jannh@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Add architecture specific implementation details for KFENCE and enable
KFENCE for the x86 architecture. In particular, this implements the
required interface in <asm/kfence.h> for setting up the pool and
providing helper functions for protecting and unprotecting pages.
For x86, we need to ensure that the pool uses 4K pages, which is done
using the set_memory_4k() helper function.
[elver@google.com: add missing copyright and description header]
Link: https://lkml.kernel.org/r/20210118092159.145934-2-elver@google.com
Link: https://lkml.kernel.org/r/20201103175841.3495947-3-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Signed-off-by: Alexander Potapenko <glider@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Co-developed-by: Marco Elver <elver@google.com>
Reviewed-by: Jann Horn <jannh@google.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Christopher Lameter <cl@linux.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Eric Dumazet <edumazet@google.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hillf Danton <hdanton@sina.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Joern Engel <joern@purestorage.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Paul E. McKenney <paulmck@kernel.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: SeongJae Park <sjpark@amazon.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
A missing flush would cause the static branch to trigger incorrectly.
Cc: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Check that PML is actually enabled before setting the mask to force a
SPTE to be write-protected. The bits used for the !AD_ENABLED case are
in the upper half of the SPTE. With 64-bit paging and EPT, these bits
are ignored, but with 32-bit PAE paging they are reserved. Setting them
for L2 SPTEs without checking PML breaks NPT on 32-bit KVM.
Fixes: 1f4e5fc83a42 ("KVM: x86: fix nested guest live migration with PML")
Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210225204749.1512652-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reported by syzkaller:
KASAN: null-ptr-deref in range [0x0000000000000140-0x0000000000000147]
CPU: 1 PID: 8370 Comm: syz-executor859 Not tainted 5.11.0-syzkaller #0
RIP: 0010:synic_get arch/x86/kvm/hyperv.c:165 [inline]
RIP: 0010:kvm_hv_set_sint_gsi arch/x86/kvm/hyperv.c:475 [inline]
RIP: 0010:kvm_hv_irq_routing_update+0x230/0x460 arch/x86/kvm/hyperv.c:498
Call Trace:
kvm_set_irq_routing+0x69b/0x940 arch/x86/kvm/../../../virt/kvm/irqchip.c:223
kvm_vm_ioctl+0x12d0/0x2800 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3959
vfs_ioctl fs/ioctl.c:48 [inline]
__do_sys_ioctl fs/ioctl.c:753 [inline]
__se_sys_ioctl fs/ioctl.c:739 [inline]
__x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
entry_SYSCALL_64_after_hwframe+0x44/0xae
Hyper-V context is lazily allocated until Hyper-V specific MSRs are accessed
or SynIC is enabled. However, the syzkaller testcase sets irq routing table
directly w/o enabling SynIC. This results in null-ptr-deref when accessing
SynIC Hyper-V context. This patch fixes it.
syzkaller source: https://syzkaller.appspot.com/x/repro.c?x=163342ccd00000
Reported-by: syzbot+6987f3b2dbd9eda95f12@syzkaller.appspotmail.com
Fixes: 8f014550dfb1 ("KVM: x86: hyper-v: Make Hyper-V emulation enablement conditional")
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1614326399-5762-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The 'mmu_page_hash' is used as hash table while 'active_mmu_pages' is a
list. Remove the misplaced comment as it's mostly stating the obvious
anyways.
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210226061945.1222-1-dongli.zhang@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Fix false-positive build warnings for ARCH=ia64 builds
- Optimize dictionary size for module compression with xz
- Check the compiler and linker versions in Kconfig
- Fix misuse of extra-y
- Support DWARF v5 debug info
- Clamp SUBLEVEL to 255 because stable releases 4.4.x and 4.9.x
exceeded the limit
- Add generic syscall{tbl,hdr}.sh for cleanups across arches
- Minor cleanups of genksyms
- Minor cleanups of Kconfig
* tag 'kbuild-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (38 commits)
initramfs: Remove redundant dependency of RD_ZSTD on BLK_DEV_INITRD
kbuild: remove deprecated 'always' and 'hostprogs-y/m'
kbuild: parse C= and M= before changing the working directory
kbuild: reuse this-makefile to define abs_srctree
kconfig: unify rule of config, menuconfig, nconfig, gconfig, xconfig
kconfig: omit --oldaskconfig option for 'make config'
kconfig: fix 'invalid option' for help option
kconfig: remove dead code in conf_askvalue()
kconfig: clean up nested if-conditionals in check_conf()
kconfig: Remove duplicate call to sym_get_string_value()
Makefile: Remove # characters from compiler string
Makefile: reuse CC_VERSION_TEXT
kbuild: check the minimum linker version in Kconfig
kbuild: remove ld-version macro
scripts: add generic syscallhdr.sh
scripts: add generic syscalltbl.sh
arch: syscalls: remove $(srctree)/ prefix from syscall tables
arch: syscalls: add missing FORCE and fix 'targets' to make if_changed work
gen_compile_commands: prune some directories
kbuild: simplify access to the kernel's version
...
|
|
Fix the interpreation of nested_svm_vmexit()'s return value when
synthesizing a nested VM-Exit after intercepting an SVM instruction while
L2 was running. The helper returns '0' on success, whereas a return
value of '0' in the exit handler path means "exit to userspace". The
incorrect return value causes KVM to exit to userspace without filling
the run state, e.g. QEMU logs "KVM: unknown exit, hardware reason 0".
Fixes: 14c2bf81fcd2 ("KVM: SVM: Fix #GP handling for doubly-nested virtualization")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210224005627.657028-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 irq entry updates from Thomas Gleixner:
"The irq stack switching was moved out of the ASM entry code in course
of the entry code consolidation. It ended up being suboptimal in
various ways.
This reworks the X86 irq stack handling:
- Make the stack switching inline so the stackpointer manipulation is
not longer at an easy to find place.
- Get rid of the unnecessary indirect call.
- Avoid the double stack switching in interrupt return and reuse the
interrupt stack for softirq handling.
- A objtool fix for CONFIG_FRAME_POINTER=y builds where it got
confused about the stack pointer manipulation"
* tag 'x86-entry-2021-02-24' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix stack-swizzle for FRAME_POINTER=y
um: Enforce the usage of asm-generic/softirq_stack.h
x86/softirq/64: Inline do_softirq_own_stack()
softirq: Move do_softirq_own_stack() to generic asm header
softirq: Move __ARCH_HAS_DO_SOFTIRQ to Kconfig
x86: Select CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK
x86/softirq: Remove indirection in do_softirq_own_stack()
x86/entry: Use run_sysvec_on_irqstack_cond() for XEN upcall
x86/entry: Convert device interrupts to inline stack switching
x86/entry: Convert system vectors to irq stack macro
x86/irq: Provide macro for inlining irq stack switching
x86/apic: Split out spurious handling code
x86/irq/64: Adjust the per CPU irq stack pointer by 8
x86/irq: Sanitize irq stack tracking
x86/entry: Fix instrumentation annotation
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull Simple Firmware Interface (SFI) support removal from Rafael Wysocki:
"Drop support for depercated platforms using SFI, drop the entire
support for SFI that has been long deprecated too and make some
janitorial changes on top of that (Andy Shevchenko)"
* tag 'sfi-removal-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
x86/platform/intel-mid: Update Copyright year and drop file names
x86/platform/intel-mid: Remove unused header inclusion in intel-mid.h
x86/platform/intel-mid: Drop unused __intel_mid_cpu_chip and Co.
x86/platform/intel-mid: Get rid of intel_scu_ipc_legacy.h
x86/PCI: Describe @reg for type1_access_ok()
x86/PCI: Get rid of custom x86 model comparison
sfi: Remove framework for deprecated firmware
cpufreq: sfi-cpufreq: Remove driver for deprecated firmware
media: atomisp: Remove unused header
mfd: intel_msic: Remove driver for deprecated platform
x86/apb_timer: Remove driver for deprecated platform
x86/platform/intel-mid: Remove unused leftovers (vRTC)
x86/platform/intel-mid: Remove unused leftovers (msic)
x86/platform/intel-mid: Remove unused leftovers (msic_thermal)
x86/platform/intel-mid: Remove unused leftovers (msic_power_btn)
x86/platform/intel-mid: Remove unused leftovers (msic_gpio)
x86/platform/intel-mid: Remove unused leftovers (msic_battery)
x86/platform/intel-mid: Remove unused leftovers (msic_ocd)
x86/platform/intel-mid: Remove unused leftovers (msic_audio)
platform/x86: intel_scu_wdt: Drop mistakenly added const
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver updates from Greg KH:
"Here is the large set of char/misc/whatever driver subsystem updates
for 5.12-rc1. Over time it seems like this tree is collecting more and
more tiny driver subsystems in one place, making it easier for those
maintainers, which is why this is getting larger.
Included in here are:
- coresight driver updates
- habannalabs driver updates
- virtual acrn driver addition (proper acks from the x86 maintainers)
- broadcom misc driver addition
- speakup driver updates
- soundwire driver updates
- fpga driver updates
- amba driver updates
- mei driver updates
- vfio driver updates
- greybus driver updates
- nvmeem driver updates
- phy driver updates
- mhi driver updates
- interconnect driver udpates
- fsl-mc bus driver updates
- random driver fix
- some small misc driver updates (rtsx, pvpanic, etc.)
All of these have been in linux-next for a while, with the only
reported issue being a merge conflict due to the dfl_device_id
addition from the fpga subsystem in here"
* tag 'char-misc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (311 commits)
spmi: spmi-pmic-arb: Fix hw_irq overflow
Documentation: coresight: Add PID tracing description
coresight: etm-perf: Support PID tracing for kernel at EL2
coresight: etm-perf: Clarify comment on perf options
ACRN: update MAINTAINERS: mailing list is subscribers-only
regmap: sdw-mbq: use MODULE_LICENSE("GPL")
regmap: sdw: use no_pm routines for SoundWire 1.2 MBQ
regmap: sdw: use _no_pm functions in regmap_read/write
soundwire: intel: fix possible crash when no device is detected
MAINTAINERS: replace my with email with replacements
mhi: Fix double dma free
uapi: map_to_7segment: Update example in documentation
uio: uio_pci_generic: don't fail probe if pdev->irq equals to IRQ_NOTCONNECTED
drivers/misc/vmw_vmci: restrict too big queue size in qp_host_alloc_queue
firewire: replace tricky statement by two simple ones
vme: make remove callback return void
firmware: google: make coreboot driver's remove callback return void
firmware: xilinx: Use explicit values for all enum values
sample/acrn: Introduce a sample of HSM ioctl interface usage
virt: acrn: Introduce an interface for Service VM to control vCPU
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull more clang LTO updates from Kees Cook:
"Clang LTO x86 enablement.
Full disclosure: while this has _not_ been in linux-next (since it
initially looked like the objtool dependencies weren't going to make
v5.12), it has been under daily build and runtime testing by Sami for
quite some time. These x86 portions have been discussed on lkml, with
Peter, Josh, and others helping nail things down.
The bulk of the changes are to get objtool working happily. The rest
of the x86 enablement is very small.
Summary:
- Generate __mcount_loc in objtool (Peter Zijlstra)
- Support running objtool against vmlinux.o (Sami Tolvanen)
- Clang LTO enablement for x86 (Sami Tolvanen)"
Link: https://lore.kernel.org/lkml/20201013003203.4168817-26-samitolvanen@google.com/
Link: https://lore.kernel.org/lkml/cover.1611263461.git.jpoimboe@redhat.com/
* tag 'clang-lto-v5.12-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
kbuild: lto: force rebuilds when switching CONFIG_LTO
x86, build: allow LTO to be selected
x86, cpu: disable LTO for cpu.c
x86, vdso: disable LTO only for vDSO
kbuild: lto: postpone objtool
objtool: Split noinstr validation from --vmlinux
x86, build: use objtool mcount
tracing: add support for objtool mcount
objtool: Don't autodetect vmlinux.o
objtool: Fix __mcount_loc generation with Clang's assembler
objtool: Add a pass for generating __mcount_loc
|
