summaryrefslogtreecommitdiff
path: root/arch/x86
AgeCommit message (Collapse)AuthorFilesLines
2010-05-17KVM: Fix MAXPHYADDR calculation when cpuid does not support itAvi Kivity1-0/+4
MAXPHYADDR is derived from cpuid 0x80000008, but when that isn't present, we get some random value. Fix by checking first that cpuid 0x80000008 is supported. Acked-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: Trace emulated instructionsAvi Kivity2-0/+90
Log emulated instructions in ftrace, especially if they failed. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: Don't overwrite decode cacheAvi Kivity1-9/+10
Currently if we an instruction spans a page boundary, when we fetch the second half we overwrite the first half. This prevents us from tracing the full instruction opcodes. Fix by appending the second half to the first. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: MMU: remove unnecessary NX check in walk_addrXiao Guangrong1-1/+1
After is_rsvd_bits_set() checks, EFER.NXE must be enabled if NX bit is seted Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: MMU: remove unused fieldXiao Guangrong2-3/+0
kvm_mmu_page.oos_link is not used, so remove it Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: MMU: cleanup/fix mmu audit codeXiao Guangrong1-7/+8
This patch does: - 'sp' parameter in inspect_spte_fn() is not used, so remove it - fix 'kvm' and 'slots' is not defined in count_rmaps() - fix a bug in inspect_spte_has_rmap() Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: MMU: Disassociate direct maps from guest levelsAvi Kivity1-0/+2
Direct maps are linear translations for a section of memory, used for real mode or with large pages. As such, they are independent of the guest levels. Teach the mmu about this by making page->role.glevels = 0 for direct maps. This allows direct maps to be shared among real mode and the various paging modes. Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: MMU: check reserved bits only if CR4.PSE=1 or CR4.PAE=1Xiao Guangrong1-3/+9
- Check reserved bits only if CR4.PAE=1 or CR4.PSE=1 when guest #PF occurs - Fix a typo in reset_rsvds_bits_mask() Signed-off-by: Xiao Guangrong <xiaoguangrong@cn.fujitsu.com> Reviewed-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: x86: document KVM_REQ_PENDING_TIMER usageMarcelo Tosatti1-1/+2
Document that KVM_REQ_PENDING_TIMER is implicitly used during guest entry. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: x86 emulator: fix unlocked CMPXCHG8B emulationGleb Natapov1-1/+0
When CMPXCHG8B is executed without LOCK prefix it is racy. Preserve this behaviour in emulator too. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: x86 emulator: add decoding of CMPXCHG8B dst operandGleb Natapov1-14/+10
Decode CMPXCHG8B destination operand in decoding stage. Fixes regression introduced by "If LOCK prefix is used dest arg should be memory" commit. This commit relies on dst operand be decoded at the beginning of an instruction emulation. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: x86 emulator: commit rflags as part of registers commitGleb Natapov3-2/+8
Make sure that rflags is committed only after successful instruction emulation. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: x86: Fix 32-bit build breakage due to typoJan Kiszka1-1/+1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-17KVM: small kvm_arch_vcpu_ioctl_run() cleanup.Gleb Natapov1-26/+6
Unify all conditions that get us back into emulator after returning from userspace. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: introduce pio in string read ahead.Gleb Natapov2-5/+48
To optimize "rep ins" instruction do IO in big chunks ahead of time instead of doing it only when required during instruction emulation. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: restart string instruction without going back to a guest.Gleb Natapov3-12/+42
Currently when string instruction is only partially complete we go back to a guest mode, guest tries to reexecute instruction and exits again and at this point emulation continues. Avoid all of this by restarting instruction without going back to a guest mode, but return to a guest mode each 1024 iterations to allow interrupt injection. Pending exception causes immediate guest entry too. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: remove saved_eipGleb Natapov1-8/+1
c->eip is never written back in case of emulation failure, so no need to set it to old value. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: Move string pio emulation into emulator.cGleb Natapov3-230/+32
Currently emulation is done outside of emulator so things like doing ins/outs to/from mmio are broken it also makes it hard (if not impossible) to implement single stepping in the future. The implementation in this patch is not efficient since it exits to userspace for each IO while previous implementation did 'ins' in batches. Further patch that implements pio in string read ahead address this problem. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix in/out emulation.Gleb Natapov6-133/+178
in/out emulation is broken now. The breakage is different depending on where IO device resides. If it is in userspace emulator reports emulation failure since it incorrectly interprets kvm_emulate_pio() return value. If IO device is in the kernel emulation of 'in' will do nothing since kvm_emulate_pio() stores result directly into vcpu registers, so emulator will overwrite result of emulation during commit of shadowed register. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: during rep emulation decrement ECX only if emulation ↵Gleb Natapov1-7/+8
succeeded Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: add decoding of X,Y parameters from Intel SDMGleb Natapov1-81/+44
Add decoding of X,Y parameters from Intel SDM which are used by string instruction to specify source and destination. Use this new decoding to implement movs, cmps, stos, lods in a generic way. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: populate OP_MEM operand during decoding.Gleb Natapov1-37/+29
All struct operand fields are initialized during decoding for all operand types except OP_MEM, but there is no reason for that. Move OP_MEM operand initialization into decoding stage for consistency. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: Use task switch from emulator.cGleb Natapov2-545/+22
Remove old task switch code from x86.c Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: Use load_segment_descriptor() instead of ↵Gleb Natapov1-5/+5
kvm_load_segment_descriptor() Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: Emulate task switch in emulator.cGleb Natapov2-0/+568
Implement emulation of 16/32 bit task switch in emulator.c Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: Provide more callbacks for x86 emulator.Gleb Natapov2-15/+131
Provide get_cached_descriptor(), set_cached_descriptor(), get_segment_selector(), set_segment_selector(), get_gdt(), write_std() callbacks. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: cleanup grp3 return valueGleb Natapov1-8/+4
When x86_emulate_insn() does not know how to emulate instruction it exits via cannot_emulate label in all cases except when emulating grp3. Fix that. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: If LOCK prefix is used dest arg should be memory.Gleb Natapov1-1/+1
If LOCK prefix is used dest arg should be memory, otherwise instruction should generate #UD. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: do not call writeback if msr access fails.Gleb Natapov1-2/+2
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix return values of syscall/sysenter/sysexit emulationsGleb Natapov1-6/+11
Return X86EMUL_PROPAGATE_FAULT is fault was injected. Also inject #UD for those instruction when appropriate. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix mov dr to inject #UD when needed.Gleb Natapov1-6/+12
If CR4.DE=1 access to registers DR4/DR5 cause #UD. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: inject #UD on access to non-existing CRGleb Natapov1-0/+7
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: 0f (20|21|22|23) ignore mod bits.Gleb Natapov1-8/+0
Resent spec says that for 0f (20|21|22|23) the 2 bits in the mod field are ignored. Interestingly enough older spec says that 11 is only valid encoding. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix 0f 01 /5 emulationGleb Natapov1-0/+3
It is undefined and should generate #UD. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix mov r/m, sreg emulation.Gleb Natapov1-4/+3
mov r/m, sreg generates #UD ins sreg is incorrect. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: Provide current eip as part of emulator context.Gleb Natapov3-7/+9
Eliminate the need to call back into KVM to get it from emulator. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: Provide x86_emulate_ctxt callback to get current cplGleb Natapov3-7/+15
Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: remove realmode_lmsw function.Gleb Natapov3-11/+2
Use (get|set)_cr callback to emulate lmsw inside emulator. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: Provide callback to get/set control registers in emulator ops.Gleb Natapov4-63/+63
Use this callback instead of directly call kvm function. Also rename realmode_(set|get)_cr to emulator_(set|get)_cr since function has nothing to do with real mode. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: VMX: change to use bool return valuesGui Jianfeng1-27/+27
Make use of bool as return values, and remove some useless bool value converting. Thanks Avi to point this out. Signed-off-by: Gui Jianfeng <guijianfeng@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: Remove pointer to rflags from realmode_set_cr parameters.Gleb Natapov3-7/+3
Mov reg, cr instruction doesn't change flags in any meaningful way, so no need to update rflags after instruction execution. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: check return value against correct defineGleb Natapov1-1/+1
Check return value against correct define instead of open code the value. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: fix RCX access during rep emulationGleb Natapov1-2/+2
During rep emulation access length to RCX depends on current address mode. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86 emulator: Fix DstAcc decoding.Gleb Natapov1-2/+5
Set correct operation length. Add RAX (64bit) handling. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: MMU: Reinstate pte prefetch on invlpgAvi Kivity3-14/+39
Commit fb341f57 removed the pte prefetch on guest invlpg, citing guest races. However, the SDM is adamant that prefetch is allowed: "The processor may create entries in paging-structure caches for translations required for prefetches and for accesses that are a result of speculative execution that would never actually occur in the executed code path." And, in fact, there was a race in the prefetch code: we picked up the pte without the mmu lock held, so an older invlpg could install the pte over a newer invlpg. Reinstate the prefetch logic, but this time note whether another invlpg has executed using a counter. If a race occured, do not install the pte. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: MMU: Do not instantiate nontrapping spte on unsync pageAvi Kivity1-2/+8
The update_pte() path currently uses a nontrapping spte when a nonpresent (or nonaccessed) gpte is written. This is fine since at present it is only used on sync pages. However, on an unsync page this will cause an endless fault loop as the guest is under no obligation to invlpg a gpte that transitions from nonpresent to present. Needed for the next patch which reinstates update_pte() on invlpg. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: Don't follow an atomic operation by a non-atomic oneAvi Kivity1-6/+24
Currently emulated atomic operations are immediately followed by a non-atomic operation, so that kvm_mmu_pte_write() can be invoked. This updates the mmu but undoes the whole point of doing things atomically. Fix by only performing the atomic operation and the mmu update, and avoiding the non-atomic write. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: Make locked operations truly atomicAvi Kivity1-21/+48
Once upon a time, locked operations were emulated while holding the mmu mutex. Since mmu pages were write protected, it was safe to emulate the writes in a non-atomic manner, since there could be no other writer, either in the guest or in the kernel. These days emulation takes place without holding the mmu spinlock, so the write could be preempted by an unshadowing event, which exposes the page to writes by the guest. This may cause corruption of guest page tables. Fix by using an atomic cmpxchg for these operations. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: MMU: Consolidate two guest pte reads in kvm_mmu_pte_write()Avi Kivity1-38/+31
kvm_mmu_pte_write() reads guest ptes in two different occasions, both to allow a 32-bit pae guest to update a pte with 4-byte writes. Consolidate these into a single read, which also allows us to consolidate another read from an invlpg speculating a gpte into the shadow page table. Signed-off-by: Avi Kivity <avi@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-05-17KVM: x86: fix the error of ioctl KVM_IRQ_LINE if no irq chipWei Yongjun1-0/+2
If no irq chip in kernel, ioctl KVM_IRQ_LINE will return -EFAULT. But I see in other place such as KVM_[GET|SET]IRQCHIP, -ENXIO is return. So this patch used -ENXIO instead of -EFAULT. Signed-off-by: Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-16 08:34:16 +0300