summaryrefslogtreecommitdiff
path: root/arch/x86/mm/numa.c
AgeCommit message (Collapse)AuthorFilesLines
2015-04-07x86/mm/numa: Fix kernel stack corruption in ↵Dave Young1-2/+9
numa_init()->numa_clear_kernel_node_hotplug() I got below kernel panic during kdump test on Thinkpad T420 laptop: [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000037ba4fff] [ 0.000000] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: ffffffff81d21910 ... [ 0.000000] Call Trace: [ 0.000000] [<ffffffff817c2a26>] dump_stack+0x45/0x57 [ 0.000000] [<ffffffff817bc8d2>] panic+0xd0/0x204 [ 0.000000] [<ffffffff81d21910>] ? numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff8107741b>] __stack_chk_fail+0x1b/0x20 [ 0.000000] [<ffffffff81d21910>] numa_clear_kernel_node_hotplug+0xe6/0xf2 [ 0.000000] [<ffffffff81d21e5d>] numa_init+0x1a5/0x520 [ 0.000000] [<ffffffff81d222b1>] x86_numa_init+0x19/0x3d [ 0.000000] [<ffffffff81d22460>] initmem_init+0x9/0xb [ 0.000000] [<ffffffff81d0d00c>] setup_arch+0x94f/0xc82 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff817bd0bb>] ? printk+0x55/0x6b [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05d9b>] start_kernel+0xe8/0x4d6 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d05120>] ? early_idt_handlers+0x120/0x120 [ 0.000000] [<ffffffff81d055ee>] x86_64_start_reservations+0x2a/0x2c [ 0.000000] [<ffffffff81d05751>] x86_64_start_kernel+0x161/0x184 [ 0.000000] ---[ end Kernel panic - not syncing: stack-protector: Kernel sta This is caused by writing over the end of numa mask bitmap in numa_clear_kernel_node(). numa_clear_kernel_node() tries to set the node id in a mask bitmap, by iterating all reserved regions and assuming that every region has a valid nid. This assumption is not true because there's an exception for some graphic memory quirks. See trim_snb_memory() in arch/x86/kernel/setup.c It is easily to reproduce the bug in the kdump kernel because kdump kernel use pre-reserved memory instead of the whole memory, but kexec pass other reserved memory ranges to 2nd kernel as well. like below in my test: kdump kernel ram 0x2d000000 - 0x37bfffff One of the reserved regions: 0x40000000 - 0x40100000 which includes 0x40004000, a page excluded in trim_snb_memory(). For this memblock reserved region the nid is not set, it is still default value MAX_NUMNODES. later node_set will set bit MAX_NUMNODES thus stack corruption happen. This also happens when booting with mem= kernel commandline during my test. Fixing it by adding a check, do not call node_set in case nid is MAX_NUMNODES. Signed-off-by: Dave Young <dyoung@redhat.com> Reviewed-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Borislav Petkov <bp@alien8.de> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: bhe@redhat.com Cc: qiuxishi@huawei.com Link: http://lkml.kernel.org/r/20150407134132.GA23522@dhcp-16-198.nay.redhat.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2015-02-14x86: use %*pb[l] to print bitmaps including cpumasks and nodemasksTejun Heo1-4/+2
printk and friends can now format bitmaps using '%*pb[l]'. cpumask and nodemask also provide cpumask_pr_args() and nodemask_pr_args() respectively which can be used to generate the two printf arguments necessary to format the specified cpu/nodemask. * Unnecessary buffer size calculation and condition on the lenght removed from intel_cacheinfo.c::show_shared_cpu_map_func(). * uv_nmi_nr_cpus_pr() got overly smart and implemented "..." abbreviation if the output stretched over the predefined 1024 byte buffer. Replaced with plain printk. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Mike Travis <travis@sgi.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-10-14Merge branch 'akpm' (patches from Andrew Morton)Linus Torvalds1-44/+45
Merge second patch-bomb from Andrew Morton: - a few hotfixes - drivers/dma updates - MAINTAINERS updates - Quite a lot of lib/ updates - checkpatch updates - binfmt updates - autofs4 - drivers/rtc/ - various small tweaks to less used filesystems - ipc/ updates - kernel/watchdog.c changes * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (135 commits) mm: softdirty: enable write notifications on VMAs after VM_SOFTDIRTY cleared kernel/param: consolidate __{start,stop}___param[] in <linux/moduleparam.h> ia64: remove duplicate declarations of __per_cpu_start[] and __per_cpu_end[] frv: remove unused declarations of __start___ex_table and __stop___ex_table kvm: ensure hard lockup detection is disabled by default kernel/watchdog.c: control hard lockup detection default staging: rtl8192u: use %*pEn to escape buffer staging: rtl8192e: use %*pEn to escape buffer staging: wlan-ng: use %*pEhp to print SN lib80211: remove unused print_ssid() wireless: hostap: proc: print properly escaped SSID wireless: ipw2x00: print SSID via %*pE wireless: libertas: print esaped string via %*pE lib/vsprintf: add %*pE[achnops] format specifier lib / string_helpers: introduce string_escape_mem() lib / string_helpers: refactoring the test suite lib / string_helpers: move documentation to c-file include/linux: remove strict_strto* definitions arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggable fs: check bh blocknr earlier when searching lru ...
2014-10-14arch/x86/mm/numa.c: fix boot failure when all nodes are hotpluggableXishi Qiu1-44/+45
If all the nodes are marked hotpluggable, alloc node data will fail. Because __next_mem_range_rev() will skip the hotpluggable memory regions. numa_clear_kernel_node_hotplug() is called after alloc node data. numa_init() ... ret = init_func(); // this will mark hotpluggable flag from SRAT ... memblock_set_bottom_up(false); ... ret = numa_register_memblks(&numa_meminfo); // this will alloc node data(pglist_data) ... numa_clear_kernel_node_hotplug(); // in case all the nodes are hotpluggable ... numa_register_memblks() setup_node_data() memblock_find_in_range_node() __memblock_find_range_top_down() for_each_mem_range_rev() __next_mem_range_rev() This patch moves numa_clear_kernel_node_hotplug() into numa_register_memblks(), clear kernel node hotpluggable flag before alloc node data, then alloc node data won't fail even all the nodes are hotpluggable. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Xishi Qiu <qiuxishi@huawei.com> Cc: Dave Jones <davej@redhat.com> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Gu Zheng <guz.fnst@cn.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-09-16x86/mm/numa: Drop dead code and rename setup_node_data() to setup_alloc_data()Luiz Capitulino1-20/+14
The setup_node_data() function allocates a pg_data_t object, inserts it into the node_data[] array and initializes the following fields: node_id, node_start_pfn and node_spanned_pages. However, a few function calls later during the kernel boot, free_area_init_node() re-initializes those fields, possibly with setup_node_data() is not used. This causes a small glitch when running Linux as a hyperv numa guest: SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] SRAT: Node 1 PXM 1 [mem 0x80200000-0xf7ffffff] SRAT: Node 1 PXM 1 [mem 0x100000000-0x1081fffff] NUMA: Node 1 [mem 0x80200000-0xf7ffffff] + [mem 0x100000000-0x1081fffff] -> [mem 0x80200000-0x1081fffff] Initmem setup node 0 [mem 0x00000000-0x7fffffff] NODE_DATA [mem 0x7ffdc000-0x7ffeffff] Initmem setup node 1 [mem 0x80800000-0x1081fffff] NODE_DATA [mem 0x1081ea000-0x1081fdfff] crashkernel: memory value expected [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0 [ffffea0002000000-ffffea00043fffff] PMD -> [ffff880105600000-ffff8801077fffff] on node 1 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x1081fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x7ffeffff] node 1: [mem 0x80200000-0xf7ffffff] node 1: [mem 0x100000000-0x1081fffff] On node 0 totalpages: 524174 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 520176 pages, LIFO batch:31 On node 1 totalpages: 524288 DMA32 zone: 7672 pages used for memmap DMA32 zone: 491008 pages, LIFO batch:31 Normal zone: 520 pages used for memmap Normal zone: 33280 pages, LIFO batch:7 In this dmesg, the SRAT table reports that the memory range for node 1 starts at 0x80200000. However, the line starting with "Initmem" reports that node 1 memory range starts at 0x80800000. The "Initmem" line is reported by setup_node_data() and is wrong, because the kernel ends up using the range as reported in the SRAT table. This commit drops all that dead code from setup_node_data(), renames it to alloc_node_data() and adds a printk() to free_area_init_node() so that we report a node's memory range accurately. Here's the same dmesg section with this patch applied: SRAT: PXM 0 -> APIC 0x00 -> Node 0 SRAT: PXM 0 -> APIC 0x01 -> Node 0 SRAT: PXM 1 -> APIC 0x02 -> Node 1 SRAT: PXM 1 -> APIC 0x03 -> Node 1 SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] SRAT: Node 1 PXM 1 [mem 0x80200000-0xf7ffffff] SRAT: Node 1 PXM 1 [mem 0x100000000-0x1081fffff] NUMA: Node 1 [mem 0x80200000-0xf7ffffff] + [mem 0x100000000-0x1081fffff] -> [mem 0x80200000-0x1081fffff] NODE_DATA(0) allocated [mem 0x7ffdc000-0x7ffeffff] NODE_DATA(1) allocated [mem 0x1081ea000-0x1081fdfff] crashkernel: memory value expected [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff88007de00000-ffff88007fdfffff] on node 0 [ffffea0002000000-ffffea00043fffff] PMD -> [ffff880105600000-ffff8801077fffff] on node 1 Zone ranges: DMA [mem 0x00001000-0x00ffffff] DMA32 [mem 0x01000000-0xffffffff] Normal [mem 0x100000000-0x1081fffff] Movable zone start for each node Early memory node ranges node 0: [mem 0x00001000-0x0009efff] node 0: [mem 0x00100000-0x7ffeffff] node 1: [mem 0x80200000-0xf7ffffff] node 1: [mem 0x100000000-0x1081fffff] Initmem setup node 0 [mem 0x00001000-0x7ffeffff] On node 0 totalpages: 524174 DMA zone: 64 pages used for memmap DMA zone: 21 pages reserved DMA zone: 3998 pages, LIFO batch:0 DMA32 zone: 8128 pages used for memmap DMA32 zone: 520176 pages, LIFO batch:31 Initmem setup node 1 [mem 0x80200000-0x1081fffff] On node 1 totalpages: 524288 DMA32 zone: 7672 pages used for memmap DMA32 zone: 491008 pages, LIFO batch:31 Normal zone: 520 pages used for memmap Normal zone: 33280 pages, LIFO batch:7 This commit was tested on a two node bare-metal NUMA machine and Linux as a numa guest on hyperv and qemu/kvm. PS: The wrong memory range reported by setup_node_data() seems to be harmless in the current kernel because it's just not used. However, that bad range is used in kernel 2.6.32 to initialize the old boot memory allocator, which causes a crash during boot. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Acked-by: Rik van Riel <riel@redhat.com> Cc: Andi Kleen <andi@firstfloor.org> Cc: David Rientjes <rientjes@google.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2014-06-05arch/x86/mm/numa.c: use for_each_memblock()Emil Medve1-3/+3
Signed-off-by: Emil Medve <Emilian.Medve@Freescale.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-27x86, platforms: Remove NUMAQH. Peter Anvin1-4/+0
The NUMAQ support seems to be unmaintained, remove it. Cc: Paul Gortmaker <paul.gortmaker@windriver.com> Cc: David Rientjes <rientjes@google.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Link: http://lkml.kernel.org/r/n/530CFD6C.7040705@zytor.com
2014-02-07arch/x86/mm/numa.c: fix array index overflow when synchronizing nid to ↵Tang Chen1-8/+11
memblock.reserved. The following path will cause array out of bound. memblock_add_region() will always set nid in memblock.reserved to MAX_NUMNODES. In numa_register_memblks(), after we set all nid to correct valus in memblock.reserved, we called setup_node_data(), and used memblock_alloc_nid() to allocate memory, with nid set to MAX_NUMNODES. The nodemask_t type can be seen as a bit array. And the index is 0 ~ MAX_NUMNODES-1. After that, when we call node_set() in numa_clear_kernel_node_hotplug(), the nodemask_t got an index of value MAX_NUMNODES, which is out of [0 ~ MAX_NUMNODES-1]. See below: numa_init() |---> numa_register_memblks() | |---> memblock_set_node(memory) set correct nid in memblock.memory | |---> memblock_set_node(reserved) set correct nid in memblock.reserved | |...... | |---> setup_node_data() | |---> memblock_alloc_nid() here, nid is set to MAX_NUMNODES (1024) |...... |---> numa_clear_kernel_node_hotplug() |---> node_set() here, we have an index 1024, and overflowed This patch moves nid setting to numa_clear_kernel_node_hotplug() to fix this problem. Reported-by: Dave Jones <davej@redhat.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Tested-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by: Dave Jones <davej@redhat.com> Cc: David Rientjes <rientjes@google.com> Tested-by: Dave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-02-07arch/x86/mm/numa.c: initialize numa_kernel_nodes in ↵Tang Chen1-1/+1
numa_clear_kernel_node_hotplug() On-stack variable numa_kernel_nodes in numa_clear_kernel_node_hotplug() was not initialized. So we need to initialize it. [akpm@linux-foundation.org: use NODE_MASK_NONE, per David] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Tested-by: Gu Zheng <guz.fnst@cn.fujitsu.com> Reported-by: Dave Jones <davej@redhat.com> Reported-by: David Rientjes <rientjes@google.com> Tested-by: Dave Jones <davej@redhat.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22acpi, numa, mem_hotplug: mark all nodes the kernel resides un-hotpluggableTang Chen1-0/+44
At very early time, the kernel have to use some memory such as loading the kernel image. We cannot prevent this anyway. So any node the kernel resides in should be un-hotpluggable. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22acpi, numa, mem_hotplug: mark hotpluggable memory in memblockTang Chen1-0/+2
When parsing SRAT, we know that which memory area is hotpluggable. So we invoke function memblock_mark_hotplug() introduced by previous patch to mark hotpluggable memory in memblock. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2014-01-22memblock: make memblock_set_node() support different memblock_typeTang Chen1-2/+4
[sfr@canb.auug.org.au: fix powerpc build] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: "Rafael J . Wysocki" <rjw@sisk.pl> Cc: Chen Tang <imtangchen@gmail.com> Cc: Gong Chen <gong.chen@linux.intel.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Larry Woodman <lwoodman@redhat.com> Cc: Len Brown <lenb@kernel.org> Cc: Liu Jiang <jiang.liu@huawei.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Prarit Bhargava <prarit@redhat.com> Cc: Rik van Riel <riel@redhat.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Tejun Heo <tj@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Thomas Renninger <trenn@suse.de> Cc: Toshi Kani <toshi.kani@hp.com> Cc: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-12-19x86/mm/numa: Fix 32-bit kernel NUMA bootLans Zhang1-3/+7
When booting a 32-bit x86 kernel on a NUMA machine, node data cannot be allocated from local node if the account of memory for node 0 covers the low memory space entirely: [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x83fffffff] [ 0.000000] NODE_DATA [mem 0x367ed000-0x367edfff] [ 0.000000] Initmem setup node 1 [mem 0x840000000-0xfffffffff] [ 0.000000] Cannot find 4096 bytes in node 1 [ 0.000000] 64664MB HIGHMEM available. [ 0.000000] 871MB LOWMEM available. To fix this issue, node data is allowed to be allocated from other nodes if the memory of local node is still not mapped. The expected result looks like this: [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x83fffffff] [ 0.000000] NODE_DATA [mem 0x367ed000-0x367edfff] [ 0.000000] Initmem setup node 1 [mem 0x840000000-0xfffffffff] [ 0.000000] NODE_DATA [mem 0x367ec000-0x367ecfff] [ 0.000000] NODE_DATA(1) on node 0 [ 0.000000] 64664MB HIGHMEM available. [ 0.000000] 871MB LOWMEM available. Signed-off-by: Lans Zhang <jia.zhang@windriver.com> Cc: <andi@firstfloor.org> Cc: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/1386303510-18574-1-git-send-email-jia.zhang@windriver.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-11-13mem-hotplug: introduce movable_node boot optionTang Chen1-0/+11
The hot-Pluggable field in SRAT specifies which memory is hotpluggable. As we mentioned before, if hotpluggable memory is used by the kernel, it cannot be hot-removed. So memory hotplug users may want to set all hotpluggable memory in ZONE_MOVABLE so that the kernel won't use it. Memory hotplug users may also set a node as movable node, which has ZONE_MOVABLE only, so that the whole node can be hot-removed. But the kernel cannot use memory in ZONE_MOVABLE. By doing this, the kernel cannot use memory in movable nodes. This will cause NUMA performance down. And other users may be unhappy. So we need a way to allow users to enable and disable this functionality. In this patch, we introduce movable_node boot option to allow users to choose to not to consume hotpluggable memory at early boot time and later we can set it as ZONE_MOVABLE. To achieve this, the movable_node boot option will control the memblock allocation direction. That said, after memblock is ready, before SRAT is parsed, we should allocate memory near the kernel image as we explained in the previous patches. So if movable_node boot option is set, the kernel does the following: 1. After memblock is ready, make memblock allocate memory bottom up. 2. After SRAT is parsed, make memblock behave as default, allocate memory top down. Users can specify "movable_node" in kernel commandline to enable this functionality. For those who don't use memory hotplug or who don't want to lose their NUMA performance, just don't specify anything. The kernel will work as before. Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com> Suggested-by: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Suggested-by: Ingo Molnar <mingo@kernel.org> Acked-by: Tejun Heo <tj@kernel.org> Acked-by: Toshi Kani <toshi.kani@hp.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Taku Izumi <izumi.taku@jp.fujitsu.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michal Nazarewicz <mina86@mina86.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Rik van Riel <riel@redhat.com> Cc: Johannes Weiner <hannes@cmpxchg.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-07-15x86: delete __cpuinit usage from all x86 filesPaul Gortmaker1-6/+6
The __cpuinit type of throwaway sections might have made sense some time ago when RAM was more constrained, but now the savings do not offset the cost and complications. For example, the fix in commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time") is a good example of the nasty type of bugs that can be created with improper use of the various __init prefixes. After a discussion on LKML[1] it was decided that cpuinit should go the way of devinit and be phased out. Once all the users are gone, we can then finally remove the macros themselves from linux/init.h. Note that some harmless section mismatch warnings may result, since notify_cpu_starting() and cpu_up() are arch independent (kernel/cpu.c) are flagged as __cpuinit -- so if we remove the __cpuinit from arch specific callers, we will also get section mismatch warnings. As an intermediate step, we intend to turn the linux/init.h cpuinit content into no-ops as early as possible, since that will get rid of these warnings. In any case, they are temporary and harmless. This removes all the arch/x86 uses of the __cpuinit macros from all C files. x86 only had the one __CPUINIT used in assembly files, and it wasn't paired off with a .previous or a __FINIT, so we can delete it directly w/o any corresponding additional change there. [1] https://lkml.org/lkml/2013/5/20/589 Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: x86@kernel.org Acked-by: Ingo Molnar <mingo@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: H. Peter Anvin <hpa@linux.intel.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-04-30x86/mm/numa: use setup_nr_node_ids() instead of opencoding.Cody P Schafer1-6/+3
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-03-02x86, ACPI, mm: Revert movablemem_map supportYinghai Lu1-6/+5
Tim found: WARNING: at arch/x86/kernel/smpboot.c:324 topology_sane.isra.2+0x6f/0x80() Hardware name: S2600CP sched: CPU #1's llc-sibling CPU #0 is not on the same node! [node: 1 != 0]. Ignoring dependency. smpboot: Booting Node 1, Processors #1 Modules linked in: Pid: 0, comm: swapper/1 Not tainted 3.9.0-0-generic #1 Call Trace: set_cpu_sibling_map+0x279/0x449 start_secondary+0x11d/0x1e5 Don Morris reproduced on a HP z620 workstation, and bisected it to commit e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") It turns out movable_map has some problems, and it breaks several things 1. numa_init is called several times, NOT just for srat. so those nodes_clear(numa_nodes_parsed) memset(&numa_meminfo, 0, sizeof(numa_meminfo)) can not be just removed. Need to consider sequence is: numaq, srat, amd, dummy. and make fall back path working. 2. simply split acpi_numa_init to early_parse_srat. a. that early_parse_srat is NOT called for ia64, so you break ia64. b. for (i = 0; i < MAX_LOCAL_APIC; i++) set_apicid_to_node(i, NUMA_NO_NODE) still left in numa_init. So it will just clear result from early_parse_srat. it should be moved before that.... c. it breaks ACPI_TABLE_OVERIDE...as the acpi table scan is moved early before override from INITRD is settled. 3. that patch TITLE is total misleading, there is NO x86 in the title, but it changes critical x86 code. It caused x86 guys did not pay attention to find the problem early. Those patches really should be routed via tip/x86/mm. 4. after that commit, following range can not use movable ram: a. real_mode code.... well..funny, legacy Node0 [0,1M) could be hot-removed? b. initrd... it will be freed after booting, so it could be on movable... c. crashkernel for kdump...: looks like we can not put kdump kernel above 4G anymore. d. init_mem_mapping: can not put page table high anymore. e. initmem_init: vmemmap can not be high local node anymore. That is not good. If node is hotplugable, the mem related range like page table and vmemmap could be on the that node without problem and should be on that node. We have workaround patch that could fix some problems, but some can not be fixed. So just remove that offending commit and related ones including: f7210e6c4ac7 ("mm/memblock.c: use CONFIG_HAVE_MEMBLOCK_NODE_MAP to protect movablecore_map in memblock_overlaps_region().") 01a178a94e8e ("acpi, memory-hotplug: support getting hotplug info from SRAT") 27168d38fa20 ("acpi, memory-hotplug: extend movablemem_map ranges to the end of node") e8d195525809 ("acpi, memory-hotplug: parse SRAT before memblock is ready") fb06bc8e5f42 ("page_alloc: bootmem limit with movablecore_map") 42f47e27e761 ("page_alloc: make movablemem_map have higher priority") 6981ec31146c ("page_alloc: introduce zone_movable_limit[] to keep movable limit for nodes") 34b71f1e04fc ("page_alloc: add movable_memmap kernel parameter") 4d59a75125d5 ("x86: get pg_data_t's memory from other node") Later we should have patches that will make sure kernel put page table and vmemmap on local node ram instead of push them down to node0. Also need to find way to put other kernel used ram to local node ram. Reported-by: Tim Gardner <tim.gardner@canonical.com> Reported-by: Don Morris <don.morris@hp.com> Bisected-by: Don Morris <don.morris@hp.com> Tested-by: Don Morris <don.morris@hp.com> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Tejun Heo <tj@kernel.org> Cc: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-27Merge branch 'x86-urgent-for-linus' of ↵Linus Torvalds1-2/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 fixes from Ingo Molnar. * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm/pageattr: Prevent PSE and GLOABL leftovers to confuse pmd/pte_present and pmd_huge Revert "x86, mm: Make spurious_fault check explicitly check explicitly check the PRESENT bit" x86/mm/numa: Don't check if node is NUMA_NO_NODE x86, efi: Make "noefi" really disable EFI runtime serivces x86/apic: Fix parsing of the 'lapic' cmdline option
2013-02-24x86/mm/numa: Don't check if node is NUMA_NO_NODEWen Congyang1-2/+1
If we aren't debugging per_cpu maps, the cpu's node is stored in per_cpu variable numa_node. If `node' is NUMA_NO_NODE, it means the caller wants to clear the cpu's node. So we should also call set_cpu_numa_node() in this case. Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Cc: Len Brown <len.brown@intel.com> Cc: Pavel Machek <pavel@ucw.cz> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-02-24acpi, memory-hotplug: parse SRAT before memblock is readyTang Chen1-2/+4
On linux, the pages used by kernel could not be migrated. As a result, if a memory range is used by kernel, it cannot be hot-removed. So if we want to hot-remove memory, we should prevent kernel from using it. The way now used to prevent this is specify a memory range by movablemem_map boot option and set it as ZONE_MOVABLE. But when the system is booting, memblock will allocate memory, and reserve the memory for kernel. And before we parse SRAT, and know the node memory ranges, memblock is working. And it may allocate memory in ranges to be set as ZONE_MOVABLE. This memory can be used by kernel, and never be freed. So, let's parse SRAT before memblock is called first. And it is early enough. The first call of memblock_find_in_range_node() is in: setup_arch() |-->setup_real_mode() so, this patch add a function early_parse_srat() to parse SRAT, and call it before setup_real_mode() is called. NOTE: 1) early_parse_srat() is called before numa_init(), and has initialized numa_meminfo. So DO NOT clear numa_nodes_parsed in numa_init() and DO NOT zero numa_meminfo in numa_init(), otherwise we will lose memory numa info. 2) I don't know why using count of memory affinities parsed from SRAT as a return value in original acpi_numa_init(). So I add a static variable srat_mem_cnt to remember this count and use it as the return value of the new acpi_numa_init() [mhocko@suse.cz: parse SRAT before memblock is ready fix] Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Reviewed-by: Wen Congyang <wency@cn.fujitsu.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Jiang Liu <jiang.liu@huawei.com> Cc: Jianguo Wu <wujianguo@huawei.com> Cc: Kamezawa Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Lai Jiangshan <laijs@cn.fujitsu.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Len Brown <lenb@kernel.org> Cc: "Brown, Len" <len.brown@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-24x86: get pg_data_t's memory from other nodeYasuaki Ishimatsu1-3/+2
During the implementation of SRAT support, we met a problem. In setup_arch(), we have the following call series: 1) memblock is ready; 2) some functions use memblock to allocate memory; 3) parse ACPI tables, such as SRAT. Before 3), we don't know which memory is hotpluggable, and as a result, we cannot prevent memblock from allocating hotpluggable memory. So, in 2), there could be some hotpluggable memory allocated by memblock. Now, we are trying to parse SRAT earlier, before memblock is ready. But I think we need more investigation on this topic. So in this v5, I dropped all the SRAT support, and v5 is just the same as v3, and it is based on 3.8-rc3. As we planned, we will support getting info from SRAT without users' participation at last. And we will post another patch-set to do so. And also, I think for now, we can add this boot option as the first step of supporting movable node. Since Linux cannot migrate the direct mapped pages, the only way for now is to limit the whole node containing only movable memory. Using SRAT is one way. But even if we can use SRAT, users still need an interface to enable/disable this functionality if they don't want to loose their NUMA performance. So I think, a user interface is always needed. For now, users can disable this functionality by not specifying the boot option. Later, we will post SRAT support, and add another option value "movablecore_map=acpi" to using SRAT. This patch: If system can create movable node which all memory of the node is allocated as ZONE_MOVABLE, setup_node_data() cannot allocate memory for the node's pg_data_t. So, use memblock_alloc_try_nid() instead of memblock_alloc_nid() to retry when the first allocation fails. Signed-off-by: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Signed-off-by: Lai Jiangshan <laijs@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Signed-off-by: Jiang Liu <jiang.liu@huawei.com> Cc: Wu Jianguo <wujianguo@huawei.com> Cc: Wen Congyang <wency@cn.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-24cpu-hotplug,memory-hotplug: clear cpu_to_node() when offlining the nodeWen Congyang1-2/+2
When the node is offlined, there is no memory/cpu on the node. If a sleep task runs on a cpu of this node, it will be migrated to the cpu on the other node. So we can clear cpu-to-node mapping. [akpm@linux-foundation.org: numa_clear_node() and numa_set_node() can no longer be __cpuinit] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-24cpu_hotplug: clear apicid to node when the cpu is hotremovedWen Congyang1-1/+1
When a cpu is hotpluged, we call acpi_map_cpu2node() in _acpi_map_lsapic() to store the cpu's node and apicid's node. But we don't clear the cpu's node in acpi_unmap_lsapic() when this cpu is hotremoved. If the node is also hotremoved, we will get the following messages: kernel BUG at include/linux/gfp.h:329! invalid opcode: 0000 [#1] SMP Modules linked in: ebtable_nat ebtables ipt_MASQUERADE iptable_nat nf_nat xt_CHECKSUM iptable_mangle bridge stp llc sunrpc ipt_REJECT nf_conntrack_ipv4 nf_defrag_ipv4 iptable_filter ip_tables ip6t_REJECT nf_conntrack_ipv6 nf_defrag_ipv6 xt_state nf_conntrack ip6table_filter ip6_tables binfmt_misc dm_mirror dm_region_hash dm_log dm_mod vhost_net macvtap macvlan tun uinput iTCO_wdt iTCO_vendor_support coretemp kvm_intel kvm crc32c_intel microcode pcspkr i2c_i801 i2c_core lpc_ich mfd_core ioatdma e1000e i7core_edac edac_core sg acpi_memhotplug igb dca sd_mod crc_t10dif megaraid_sas mptsas mptscsih mptbase scsi_transport_sas scsi_mod Pid: 3126, comm: init Not tainted 3.6.0-rc3-tangchen-hostbridge+ #13 FUJITSU-SV PRIMEQUEST 1800E/SB RIP: 0010:[<ffffffff811bc3fd>] [<ffffffff811bc3fd>] allocate_slab+0x28d/0x300 RSP: 0018:ffff88078a049cf8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000000000000001 RCX: 0000000000000000 RDX: 0000000000000001 RSI: 0000000000000001 RDI: 0000000000000246 RBP: ffff88078a049d38 R08: 00000000000040d0 R09: 0000000000000001 R10: 0000000000000000 R11: 0000000000000b5f R12: 00000000000052d0 R13: ffff8807c1417300 R14: 0000000000030038 R15: 0000000000000003 FS: 00007fa9b1b44700(0000) GS:ffff8807c3800000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b CR2: 00007fa9b09acca0 CR3: 000000078b855000 CR4: 00000000000007e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process init (pid: 3126, threadinfo ffff88078a048000, task ffff8807bb6f2650) Call Trace: new_slab+0x30/0x1b0 __slab_alloc+0x358/0x4c0 kmem_cache_alloc_node_trace+0xb4/0x1e0 alloc_fair_sched_group+0xd0/0x1b0 sched_create_group+0x3e/0x110 sched_autogroup_create_attach+0x4d/0x180 sys_setsid+0xd4/0xf0 system_call_fastpath+0x16/0x1b Code: 89 c4 e9 73 fe ff ff 31 c0 89 de 48 c7 c7 45 de 9e 81 44 89 45 c8 e8 22 05 4b 00 85 db 44 8b 45 c8 0f 89 4f ff ff ff 0f 0b eb fe <0f> 0b 90 eb fd 0f 0b eb fe 89 de 48 c7 c7 45 de 9e 81 31 c0 44 RIP [<ffffffff811bc3fd>] allocate_slab+0x28d/0x300 RSP <ffff88078a049cf8> ---[ end trace adf84c90f3fea3e5 ]--- The reason is that the cpu's node is not NUMA_NO_NODE, we will call alloc_pages_exact_node() to alloc memory on the node, but the node is offlined. If the node is onlined, we still need cpu's node. For example: a task on the cpu is sleeped when the cpu is hotremoved. We will choose another cpu to run this task when it is waked up. If we know the cpu's node, we will choose the cpu on the same node first. So we should clear cpu-to-node mapping when the node is offlined. This patch only clears apicid-to-node mapping when the cpu is hotremoved. [akpm@linux-foundation.org: fix section error] Signed-off-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Tang Chen <tangchen@cn.fujitsu.com> Cc: Yasuaki Ishimatsu <isimatu.yasuaki@jp.fujitsu.com> Cc: David Rientjes <rientjes@google.com> Cc: Jiang Liu <liuj97@gmail.com> Cc: Minchan Kim <minchan.kim@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-02-01x86-32, mm: Remove reference to alloc_remap()H. Peter Anvin1-18/+11
We have removed the remap allocator for x86-32, and x86-64 never had it (and doesn't need it). Remove residual reference to it. Reported-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: Dave Hansen <dave@linux.vnet.ibm.com> Cc: <stable@vger.kernel.org> Link: http://lkml.kernel.org/r/CAE9FiQVn6_QZi3fNQ-JHYiR-7jeDJ5hT0SyT_%2BzVvfOj=PzF3w@mail.gmail.com
2013-02-01x86-32, mm: Rip out x86_32 NUMA remapping codeDave Hansen1-3/+0
This code was an optimization for 32-bit NUMA systems. It has probably been the cause of a number of subtle bugs over the years, although the conditions to excite them would have been hard to trigger. Essentially, we remap part of the kernel linear mapping area, and then sometimes part of that area gets freed back in to the bootmem allocator. If those pages get used by kernel data structures (say mem_map[] or a dentry), there's no big deal. But, if anyone ever tried to use the linear mapping for these pages _and_ cared about their physical address, bad things happen. For instance, say you passed __GFP_ZERO to the page allocator and then happened to get handed one of these pages, it zero the remapped page, but it would make a pte to the _old_ page. There are probably a hundred other ways that it could screw with things. We don't need to hang on to performance optimizations for these old boxes any more. All my 32-bit NUMA systems are long dead and buried, and I probably had access to more than most people. This code is causing real things to break today: https://lkml.org/lkml/2013/1/9/376 I looked in to actually fixing this, but it requires surgery to way too much brittle code, as well as stuff like per_cpu_ptr_to_phys(). [ hpa: Cc: this for -stable, since it is a memory corruption issue. However, an alternative is to simply mark NUMA as depends BROKEN rather than EXPERIMENTAL in the X86_32 subclause... ] Link: http://lkml.kernel.org/r/20130131005616.1C79F411@kernel.stglabs.ibm.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@vger.kernel.org>
2013-01-31x86/numa: Use __pa_nodebug() insteadBorislav Petkov1-1/+1
... and fix the following warning: arch/x86/mm/numa.c: In function ‘setup_node_data’: arch/x86/mm/numa.c:222:3: warning: passing argument 1 of ‘__phys_addr_nodebug’ makes integer from pointer without a cast Signed-off-by: Borislav Petkov <bp@suse.de> Acked-by: Dave Hansen <dave@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/1359245901-8512-1-git-send-email-bp@alien8.de Signed-off-by: Ingo Molnar <mingo@kernel.org>
2013-01-26x86, mm: Make DEBUG_VIRTUAL work earlier in bootDave Hansen1-1/+1
The KVM code has some repeated bugs in it around use of __pa() on per-cpu data. Those data are not in an area on which using __pa() is valid. However, they are also called early enough in boot that __vmalloc_start_set is not set, and thus the CONFIG_DEBUG_VIRTUAL debugging does not catch them. This adds a check to also verify __pa() calls against max_low_pfn, which we can use earler in boot than is_vmalloc_addr(). However, if we are super-early in boot, max_low_pfn=0 and this will trip on every call, so also make sure that max_low_pfn is set before we try to use it. With this patch applied, CONFIG_DEBUG_VIRTUAL will actually catch the bug I was chasing (and fix later in this series). I'd love to find a generic way so that any __pa() call on percpu areas could do a BUG_ON(), but there don't appear to be any nice and easy ways to check if an address is a percpu one. Anybody have ideas on a way to do this? Signed-off-by: Dave Hansen <dave@linux.vnet.ibm.com> Link: http://lkml.kernel.org/r/20130122212430.F46F8159@kernel.stglabs.ibm.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2012-05-30x86: print physical addresses consistently with other parts of kernelBjorn Helgaas1-16/+16
Print physical address info in a style consistent with the %pR style used elsewhere in the kernel. For example: -found SMP MP-table at [ffff8800000fce90] fce90 +found SMP MP-table at [mem 0x000fce90-0x000fce9f] mapped at [ffff8800000fce90] -initial memory mapped : 0 - 20000000 +initial memory mapped: [mem 0x00000000-0x1fffffff] -Base memory trampoline at [ffff88000009c000] 9c000 size 8192 +Base memory trampoline [mem 0x0009c000-0x0009dfff] mapped at [ffff88000009c000] -SRAT: Node 0 PXM 0 0-80000000 +SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff] Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-13cpumask: update setup_node_to_cpumask_map() commentsWanlong Gao1-1/+1
node_to_cpumask() has been replaced by cpumask_of_node(), and wholly removed since commit 29c337a0 ("cpumask: remove obsolete node_to_cpumask now everyone uses cpumask_of_node"). So update the comments for setup_node_to_cpumask_map(). Signed-off-by: Wanlong Gao <gaowanlong@cn.fujitsu.com> Acked-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-01-12Merge branch 'x86-mm-for-linus' of ↵Linus Torvalds1-4/+6
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/numa: Add constraints check for nid parameters mm, x86: Remove debug_pagealloc_enabled x86/mm: Initialize high mem before free_all_bootmem() arch/x86/kernel/e820.c: quiet sparse noise about plain integer as NULL pointer arch/x86/kernel/e820.c: Eliminate bubble sort from sanitize_e820_map() x86: Fix mmap random address range x86, mm: Unify zone_sizes_init() x86, mm: Prepare zone_sizes_init() for unification x86, mm: Use max_low_pfn for ZONE_NORMAL on 64-bit x86, mm: Wrap ZONE_DMA32 with CONFIG_ZONE_DMA32 x86, mm: Use max_pfn instead of highend_pfn x86, mm: Move zone init from paging_init() on 64-bit x86, mm: Use MAX_DMA_PFN for ZONE_DMA on 32-bit
2011-12-09x86/numa: Add constraints check for nid parametersPetr Holasek1-4/+6
This patch adds constraint checks to the numa_set_distance() function. When the check triggers (this should not happen normally) it emits a warning and avoids a store to a negative index in numa_distance[] array - i.e. avoids memory corruption. Negative ids can be passed when the pxm-to-nids mapping is not properly filled while parsing the SRAT. Signed-off-by: Petr Holasek <pholasek@redhat.com> Acked-by: David Rientjes <rientjes@google.com> Cc: Anton Arapov <anton@redhat.com> Link: http://lkml.kernel.org/r/20111208121640.GA2229@dhcp-27-244.brq.redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-14memblock, x86: Replace memblock_x86_reserve/free_range() with generic onesTejun Heo1-3/+2
Other than sanity check and debug message, the x86 specific version of memblock reserve/free functions are simple wrappers around the generic versions - memblock_reserve/free(). This patch adds debug messages with caller identification to the generic versions and replaces x86 specific ones and kills them. arch/x86/include/asm/memblock.h and arch/x86/mm/memblock.c are empty after this change and removed. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-14-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14x86: Use absent_pages_in_range() instead of memblock_x86_hole_size()Tejun Heo1-2/+2
memblock_x86_hole_size() calculates the total size of holes in a given range according to memblock and is used by numa emulation code and numa_meminfo_cover_memory(). Since conversion to MEMBLOCK_NODE_MAP, absent_pages_in_range() also uses memblock and gives the same result. This patch replaces memblock_x86_hole_size() uses with absent_pages_in_range(). After the conversion the x86 function doesn't have any user left and is killed. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310462166-31469-12-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14x86: Use HAVE_MEMBLOCK_NODE_MAPTejun Heo1-8/+7
From 5732e1247898d67cbf837585150fe9f68974671d Mon Sep 17 00:00:00 2001 From: Tejun Heo <tj@kernel.org> Date: Thu, 14 Jul 2011 11:22:16 +0200 Convert x86 to HAVE_MEMBLOCK_NODE_MAP. The only difference in memory handling is that allocations can't no longer cross node boundaries whether they're node affine or not, which shouldn't matter at all. This conversion will enable further simplification of boot memory handling. -v2: Fix build failure on !NUMA configurations discovered by hpa. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20110714094423.GG3455@htj.dyndns.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14memblock, x86: Replace memblock_x86_find_in_range_node() with generic ↵Tejun Heo1-8/+1
memblock calls With the previous changes, generic NUMA aware memblock API has feature parity with memblock_x86_find_in_range_node(). There currently are two users - x86 setup_node_data() and __alloc_memory_core_early() in nobootmem.c. This patch converts the former to use memblock_alloc_nid() and the latter memblock_find_range_in_node(), and kills memblock_x86_find_in_range_node() and related functions including find_memory_early_core_early() in page_alloc.c. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310460395-30913-9-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-14memblock: Kill MEMBLOCK_ERRORTejun Heo1-3/+3
25818f0f28 (memblock: Make MEMBLOCK_ERROR be 0) thankfully made MEMBLOCK_ERROR 0 and there already are codes which expect error return to be 0. There's no point in keeping MEMBLOCK_ERROR around. End its misery. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/1310457490-3356-6-git-send-email-tj@kernel.org Cc: Yinghai Lu <yinghai@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13x86, numa: Implement pfn -> nid mapping granularity checkTejun Heo1-0/+15
SPARSEMEM w/o VMEMMAP and DISCONTIGMEM, both used only on 32bit, use sections array to map pfn to nid which is limited in granularity. If NUMA nodes are laid out such that the mapping cannot be accurate, boot will fail triggering BUG_ON() in mminit_verify_page_links(). On 32bit, it's 512MiB w/ PAE and SPARSEMEM. This seems to have been granular enough until commit 2706a0bf7b (x86, NUMA: Enable CONFIG_AMD_NUMA on 32bit too). Apparently, there is a machine which aligns NUMA nodes to 128MiB and has only AMD NUMA but not SRAT. This led to the following BUG_ON(). On node 0 totalpages: 2096615 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 3927 pages, LIFO batch:0 Normal zone: 1740 pages used for memmap Normal zone: 220978 pages, LIFO batch:31 HighMem zone: 16405 pages used for memmap HighMem zone: 1853533 pages, LIFO batch:31 BUG: Int 6: CR2 (null) EDI (null) ESI 00000002 EBP 00000002 ESP c1543ecc EBX f2400000 EDX 00000006 ECX (null) EAX 00000001 err (null) EIP c16209aa CS 00000060 flg 00010002 Stack: f2400000 00220000 f7200800 c1620613 00220000 01000000 04400000 00238000 (null) f7200000 00000002 f7200b58 f7200800 c1620929 000375fe (null) f7200b80 c16395f0 00200a02 f7200a80 (null) 000375fe 00000002 (null) Pid: 0, comm: swapper Not tainted 2.6.39-rc5-00181-g2706a0b #17 Call Trace: [<c136b1e5>] ? early_fault+0x2e/0x2e [<c16209aa>] ? mminit_verify_page_links+0x12/0x42 [<c1620613>] ? memmap_init_zone+0xaf/0x10c [<c1620929>] ? free_area_init_node+0x2b9/0x2e3 [<c1607e99>] ? free_area_init_nodes+0x3f2/0x451 [<c1601d80>] ? paging_init+0x112/0x118 [<c15f578d>] ? setup_arch+0x791/0x82f [<c15f43d9>] ? start_kernel+0x6a/0x257 This patch implements node_map_pfn_alignment() which determines maximum internode alignment and update numa_register_memblks() to reject NUMA configuration if alignment exceeds the pfn -> nid mapping granularity of the memory model as determined by PAGES_PER_SECTION. This makes the problematic machine boot w/ flatmem by rejecting the NUMA config and provides protection against crazy NUMA configurations. Signed-off-by: Tejun Heo <tj@kernel.org> Link: http://lkml.kernel.org/r/20110712074534.GB2872@htj.dyndns.org LKML-Reference: <20110628174613.GP478@escobedo.osrc.amd.com> Reported-and-Tested-by: Hans Rosenfeld <hans.rosenfeld@amd.com> Cc: Conny Seidel <conny.seidel@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-05-02x86, NUMA: Trim numa meminfo with max_pfn in a separate loopYinghai Lu1-5/+10
During testing 32bit numa unifying code from tj, found one system with more than 64g fails to use numa. It turns out we do not trim numa meminfo correctly against max_pfn in case start address of a node is higher than 64GiB. Bug fix made it to tip tree. This patch moves the checking and trimming to a separate loop. So we don't need to compare low/high in following merge loops. It makes the code more readable. Also it makes the node merge printouts less strange. On a 512GiB numa system with 32bit, before: > NUMA: Node 0 [0,a0000) + [100000,80000000) -> [0,80000000) > NUMA: Node 0 [0,80000000) + [100000000,1080000000) -> [0,1000000000) after: > NUMA: Node 0 [0,a0000) + [100000,80000000) -> [0,80000000) > NUMA: Node 0 [0,80000000) + [100000000,1000000000) -> [0,1000000000) Signed-off-by: Yinghai Lu <yinghai@kernel.org> [Updated patch description and comment slightly.] Signed-off-by: Tejun Heo <tj@kernel.org>
2011-05-02x86, NUMA: Rename setup_node_bootmem() to setup_node_data()Yinghai Lu1-3/+3
After using memblock to replace bootmem, that function only sets up node_data now. Change the name to reflect what it actually does. tj: Minor adjustment to the patch description. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Tejun Heo <tj@kernel.org>
2011-05-02x86, NUMA: Make numa_init_array() staticTejun Heo1-1/+1
numa_init_array() no longer has users outside of numa.c. Make it static. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02x86, NUMA: Make 32bit use common NUMA init pathTejun Heo1-5/+5
With both _numa_init() methods converted and the rest of init code adjusted, numa_32.c now can switch from the 32bit only init code to the common one in numa.c. * Shim get_memcfg_*()'s are dropped and initmem_init() calls x86_numa_init(), which is updated to handle NUMAQ. * All boilerplate operations including node range limiting, pgdat alloc/init are handled by numa_init(). 32bit only implementation is removed. * 32bit numa_add_memblk(), numa_set_distance() and memory_add_physaddr_to_nid() removed and common versions in numa_32.c enabled for 32bit. This change causes the following behavior changes. * NODE_DATA()->node_start_pfn/node_spanned_pages properly initialized for 32bit too. * Much more sanity checks and configuration cleanups. * Proper handling of node distances. * The same NUMA init messages as 64bit. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02x86, NUMA: Initialize and use remap allocator from setup_node_bootmem()Tejun Heo1-14/+27
setup_node_bootmem() is taken from 64bit and doesn't use remap allocator. It's about to be shared with 32bit so add support for it. If NODE_DATA is remapped, it's noted in the debug message and node locality check is skipped as the __pa() of the remapped address doesn't reflect the actual physical address. On 64bit, remap allocator becomes noop and doesn't affect the behavior. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02x86, NUMA: Remove long 64bit assumption from numa.cTejun Heo1-23/+22
Code moved from numa_64.c has assumption that long is 64bit in several places. This patch removes the assumption by using {s|u}64_t explicity, using PFN_PHYS() for page number -> addr conversions and adjusting printf formats. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02x86, NUMA: Enable build of generic NUMA init code on 32bitTejun Heo1-6/+4
Generic NUMA init code was moved to numa.c from numa_64.c but is still guaraded by CONFIG_X86_64. This patch removes the compile guard and enables compiling on 32bit. * numa_add_memblk() and numa_set_distance() clash with the shim implementation in numa_32.c and are left out. * memory_add_physaddr_to_nid() clashes with 32bit implementation and is left out. * MAX_DMA_PFN definition in dma.h moved out of !CONFIG_X86_32. * node_data definition in numa_32.c removed in favor of the one in numa.c. There are places where ulong is assumed to be 64bit. The next patch will fix them up. Note that although the code is compiled it isn't used yet and this patch doesn't cause any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02x86, NUMA: Move NUMA init logic from numa_64.c to numa.cTejun Heo1-3/+520
Move the generic 64bit NUMA init machinery from numa_64.c to numa.c. * node_data[], numa_mem_info and numa_distance * numa_add_memblk[_to](), numa_remove_memblk[_from]() * numa_set_distance() and friends * numa_init() and all the numa_meminfo handling helpers called from it * dummy_numa_init() * memory_add_physaddr_to_nid() A new function x86_numa_init() is added and the content of numa_64.c::initmem_init() is moved into it. initmem_init() now simply calls x86_numa_init(). Constants and numa_off declaration are moved from numa_{32|64}.h to numa.h. This is code reorganization and doesn't involve any functional change. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02x86, NUMA: Move numa_nodes_parsed to numa.[hc]Tejun Heo1-0/+1
Move numa_nodes_parsed from numa_64.[hc] to numa.[hc] to prepare for NUMA init path unification. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-05-02x86, NUMA: Unify 32/64bit numa_cpu_node() implementationTejun Heo1-0/+9
Currently, the only meaningful user of apic->x86_32_numa_cpu_node() is NUMAQ which returns valid mapping only after CPU is initialized during SMP bringup; thus, the previous patch to set apicid -> node in setup_local_APIC() makes __apicid_to_node[] always contain the correct mapping whether custom apic->x86_32_numa_cpu_node() is used or not. So, there is no reason to keep separate 32bit implementation. We can always consult __apicid_to_node[]. Move 64bit implementation from numa_64.c to numa.c and remove 32bit implementation from numa_32.c. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Yinghai Lu <yinghai@kernel.org> Cc: David Rientjes <rientjes@google.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com>
2011-04-21x86, numa: Fix cpu nodemasks for NUMA emulation and CONFIG_DEBUG_PER_CPU_MAPSDavid Rientjes1-18/+13
The cpu<->node mappings under CONFIG_DEBUG_PER_CPU_MAPS=y when NUMA emulation is enabled is currently broken because it does not iterate through every emulated node and bind cpus that have affinity to it. NUMA emulation should bind each cpu to every local node to accurately represent the true NUMA topology of the underlying machine. debug_cpumask_set_cpu() needs to be fixed at the same time so that the debugging information that it emits shows the new cpumask of the node being assigned when the cpu is being added or removed. It can now take responsibility of setting or clearing the cpu itself to remove the need for duplicate code. Also change its last parameter, "enable", to have the correct bool type since it can only be true or false. -v2: Fix the return statements, by Kosaki Motohiro Acked-and-Tested-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Andreas Herrmann <herrmann.der.user@googlemail.com> Cc: Tejun Heo <tj@kernel.org> Cc: Linus Torvalds <torvalds@linux-foundation.org> Link: http://lkml.kernel.org/r/alpine.DEB.2.00.1104201918470.12634@chino.kir.corp.google.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-14x86, numa: Add error handling for bad cpu-to-node mappingsDavid Rientjes1-0/+4
CONFIG_DEBUG_PER_CPU_MAPS may return NUMA_NO_NODE when an early_cpu_to_node() mapping hasn't been initialized. In such a case, it emits a warning and continues without an issue but callers may try to use the return value to index into an array. We can catch those errors and fail silently since a warning has already been emitted. No current user of numa_add_cpu() requires this error checking to avoid a crash, but it's better to be proactive in case a future user happens to have a bug and a user tries to diagnose it with CONFIG_DEBUG_PER_CPU_MAPS. Reported-by: Jesper Juhl <jj@chaosbits.net> Signed-off-by: David Rientjes <rientjes@google.com> Cc: Tejun Heo <tj@kernel.org> LKML-Reference: <alpine.DEB.2.00.1102071407250.7812@chino.kir.corp.google.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-01-28x86: Unify NUMA initialization between 32 and 64bitTejun Heo1-4/+72
Now that everything else is unified, NUMA initialization can be unified too. * numa_init_array() and init_cpu_to_node() are moved from numa_64 to numa. * numa_32::initmem_init() is updated to call numa_init_array() and setup_arch() to call init_cpu_to_node() on 32bit too. * x86_cpu_to_node_map is now initialized to NUMA_NO_NODE on 32bit too. This is safe now as numa_init_array() will initialize it early during boot. This makes NUMA mapping fully initialized before setup_per_cpu_areas() on 32bit too and thus makes the first percpu chunk which contains all the static variables and some of dynamic area allocated with NUMA affinity correctly considered. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: yinghai@kernel.org Cc: brgerst@gmail.com Cc: gorcunov@gmail.com Cc: shaohui.zheng@intel.com Cc: rientjes@google.com LKML-Reference: <1295789862-25482-17-git-send-email-tj@kernel.org> Signed-off-by: Ingo Molnar <mingo@elte.hu> Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Pekka Enberg <penberg@kernel.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-04 04:31:46 +0300