summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/apic
AgeCommit message (Collapse)AuthorFilesLines
2011-12-05x86, UV: Fix UV2 hub part numberJack Steiner1-0/+2
There was a mixup when the SGI UV2 hub chip was sent to be fabricated, and it ended up with the wrong part number in the HRP_NODE_ID mmr. Future versions of the chip will (may) have the correct part number. Change the UV infrastructure to recognize both part numbers as valid IDs of a UV2 hub chip. Signed-off-by: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20111129210058.GA20452@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-10x86, ioapic: Only print ioapic debug information for IRQs belonging to an ↵Mathias Nyman1-0/+5
ioapic chip with "apic=verbose" the print_IO_APIC() function tries to print IRQ to pin mappings for every active irq. It assumes chip_data is of type irq_cfg and may cause an oops if not. As the print_IO_APIC() is called from a late_initcall other chained irq chips may already be registered with custom chip_data information, causing an oops. This is the case with intel MID SoC devices with gpio demuxers registered as irq_chips. Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> [ -v2: fixed build failure ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-10x86/apic: Allow use of lapic timer early calibration resultJacob Pan1-7/+26
lapic timer calibration can be combined with tsc in platform specific calibration functions. if such calibration result is obtained early, we can skip the redundant calibration loops. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-11-10x86/apic: Do not clear nr_irqs_gsi if no legacy irqsJacob Pan1-3/+1
nr_legacy_irqs is set in probe_nr_irqs_gsi, we should not clear it after that. Otherwise, the result is that MSI irqs will be allocated from the wrong range for the systems without legacy PIC. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Dirk Brandewie <dirk.brandewie@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-28Merge branch 'x86-uv-for-linus' of ↵Linus Torvalds1-2/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-uv-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: uv2: Workaround for UV2 Hub bug (system global address format)
2011-10-26Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds3-209/+215
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/irq: Standardize on CONFIG_SPARSE_IRQ=y x86, ioapic: Clean up ioapic/apic_id usage x86, ioapic: Factor out print_IO_APIC() to only print one io apic x86, ioapic: Print out irte with right ioapic index x86, ioapic: Split up setup_ioapic_entry() x86, ioapic: Pass struct irq_attr * to setup_ioapic_irq() apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatches
2011-10-26Merge branch 'perf-core-for-linus' of ↵Linus Torvalds2-38/+9
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (121 commits) perf symbols: Increase symbol KSYM_NAME_LEN size perf hists browser: Refuse 'a' hotkey on non symbolic views perf ui browser: Use libslang to read keys perf tools: Fix tracing info recording perf hists browser: Elide DSO column when it is set to just one DSO, ditto for threads perf hists: Don't consider filtered entries when calculating column widths perf hists: Don't decay total_period for filtered entries perf hists browser: Honour symbol_conf.show_{nr_samples,total_period} perf hists browser: Do not exit on tab key with single event perf annotate browser: Don't change selection line when returning from callq perf tools: handle endianness of feature bitmap perf tools: Add prelink suggestion to dso update message perf script: Fix unknown feature comment perf hists browser: Apply the dso and thread filters when merging new batches perf hists: Move the dso and thread filters from hist_browser perf ui browser: Honour the xterm colors perf top tui: Give color hints just on the percentage, like on --stdio perf ui browser: Make the colors configurable and change the defaults perf tui: Remove unneeded call to newtCls on startup perf hists: Don't format the percentage on hist_entry__snprintf ... Fix up conflicts in arch/x86/kernel/kprobes.c manually. Ingo's tree did the insane "add volatile to const array", which just doesn't make sense ("volatile const"?). But we could remove the const *and* make the array volatile to make doubly sure that gcc doesn't optimize it away.. Also fix up kernel/trace/ring_buffer.c non-data-conflicts manually: the reader_lock has been turned into a raw lock by the core locking merge, and there was a new user of it introduced in this perf core merge. Make sure that new use also uses the raw accessor functions.
2011-10-13x86/irq: Standardize on CONFIG_SPARSE_IRQ=yYinghai Lu1-23/+0
Sparseirq got introduced in v2.6.28 and Thomas did a huge cleanup around v2.6.38 that eliminated basically all disadvantages of it. So we can remove non-sparseirq support now and simplify our IRQ degrees of freedom a bit. Suggested-and-acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/4E95E21D.6090200@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-12x86, ioapic: Clean up ioapic/apic_id usageYinghai Lu1-97/+97
While looking at the code, apic_id sometime is referred to index of ioapic, but sometime is used for phys apic id. and some even use apic for real apic id. It is very confusing. So try to limit apic_id or ioapic_id to be real apic id for ioapic, and use ioapic_idx for ioapic index in the array. -v2: Suggested by Ingo, use ioapic_idx consistently, instead of ioapic Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542DC.3090509@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-12x86, ioapic: Factor out print_IO_APIC() to only print one io apicYinghai Lu1-22/+24
It is getting too big after the interrupt remaping entries debug print out was added. Original print_IO_APIC() becomes print_IO_APICs(). New print_IO_APIC() will only print one ioapic's registers As a side-effect this clean-up also made checkpatch.pl happier. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542D3.5000008@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-12x86, ioapic: Print out irte with right ioapic indexYinghai Lu1-1/+1
While checking irte dump in dmesg, the print out is confusing ioapic index with real io apic id: IOAPIC[0]: Set routing entry (1-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:1) IOAPIC[1]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:31 Dest:00000001 SID:00FF SQ:0 SVT:1) IOAPIC[0]: Set routing entry (1-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:1) IOAPIC[1]: Set IRTE entry (P:1 FPD:0 Dst_Mode:1 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:1 Avail:0 Vector:30 Dest:00000001 SID:00FF SQ:0 SVT:1) The system's first ioapic id is 1. This commit: | commit 3040db92ee1b6c5b6b6d73f8cdcad54c0da11563 | Author: Naga Chumbalkar <nagananda.chumbalkar@hp.com> | Date: Tue Jul 12 21:17:41 2011 +0000 | | x86, ioapic: Print IRTE when IR is enabled Confused apic_id with the ioapic ID - fix it. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542C8.8040209@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-12x86, ioapic: Split up setup_ioapic_entry()Yinghai Lu1-59/+80
Ingo pointed out that setup_ioapic_entry() is way too big now. Split the intr-remap code out into setup_ir_ioapic_entry(). Also pass struct io_apic_irq_attr * instead of 5 parameters in those two functions. At last in setup_ir_ioapic_entry() we don't need to panic. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542BB.4070807@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-12x86, ioapic: Pass struct irq_attr * to setup_ioapic_irq()Yinghai Lu1-11/+11
Do not expand that struct, and just pass pointer to reduce the number of parameters in related functions. Signed-off-by: Yinghai Lu <yinghai@kernel.org> Cc: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Cc: Suresh Siddha <suresh.b.siddha@intel.com> Link: http://lkml.kernel.org/r/4E9542B1.7050800@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-10-10x86, nmi: Wire up NMI handlers to new routinesDon Zickus2-38/+9
Just convert all the files that have an nmi handler to the new routines. Most of it is straight forward conversion. A couple of places needed some tweaking like kgdb which separates the debug notifier from the nmi handler and mce removes a call to notify_die. [Thanks to Ying for finding out the history behind that mce call https://lkml.org/lkml/2010/5/27/114 And Boris responding that he would like to remove that call because of it https://lkml.org/lkml/2011/9/21/163] The things that get converted are the registeration/unregistration routines and the nmi handler itself has its args changed along with code removal to check which list it is on (most are on one NMI list except for kgdb which has both an NMI routine and an NMI Unknown routine). Signed-off-by: Don Zickus <dzickus@redhat.com> Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Corey Minyard <minyard@acm.org> Cc: Jason Wessel <jason.wessel@windriver.com> Cc: Andi Kleen <ak@linux.intel.com> Cc: Robert Richter <robert.richter@amd.com> Cc: Huang Ying <ying.huang@intel.com> Cc: Corey Minyard <minyard@acm.org> Cc: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/1317409584-23662-4-git-send-email-dzickus@redhat.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-28apic, i386/bigsmp: Fix false warnings regarding logical APIC ID mismatchesJan Beulich2-12/+18
These warnings (generally one per CPU) are a result of initializing x86_cpu_to_logical_apicid while apic_default is still in use, but the check in setup_local_APIC() being done when apic_bigsmp was already used as an override in default_setup_apic_routing(): Overriding APIC driver with bigsmp Enabling APIC mode: Physflat. Using 5 I/O APICs ------------[ cut here ]------------ WARNING: at .../arch/x86/kernel/apic/apic.c:1239 ... CPU 1 irqstacks, hard=f1c9a000 soft=f1c9c000 Booting Node 0, Processors #1 smpboot cpu 1: start_ip = 9e000 Initializing CPU#1 ------------[ cut here ]------------ WARNING: at .../arch/x86/kernel/apic/apic.c:1239 setup_local_APIC+0x137/0x46b() Hardware name: ... CPU1 logical APIC ID: 2 != 8 ... Fix this (for the time being, i.e. until x86_32_early_logical_apicid() will get removed again, as Tejun says ought to be possible) by overriding the previously stored values at the point where the APIC driver gets overridden. v2: Move this and the pre-existing override logic into arch/x86/kernel/apic/bigsmp_32.c. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Tejun Heo <tj@kernel.org> Cc: <stable@kernel.org> (2.6.39 and onwards) Link: http://lkml.kernel.org/r/4E835D16020000780005844C@nat28.tlf.novell.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21x86: uv2: Workaround for UV2 Hub bug (system global address format)Jack Steiner1-2/+5
This is a workaround for a UV2 hub bug that affects the format of system global addresses. The GRU API for UV2 was inadvertently broken by a hardware change. The format of the physical address used for TLB dropins and for addresses used with instructions running in unmapped mode has changed. This change was not documented and became apparent only when diags failed running on system simulators. For UV1, TLB and GRU instruction physical addresses are identical to socket physical addresses (although high NASID bits must be OR'ed into the address). For UV2, socket physical addresses need to be converted. The NODE portion of the physical address needs to be shifted so that the low bit is in bit 39 or bit 40, depending on an MMR value. It is not yet clear if this bug will be fixed in a silicon respin. If it is fixed, the hub revision will be incremented & the workaround disabled. Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <stable@kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-09-21x86, ioapic: Consolidate the explicit EOI codeSuresh Siddha1-74/+65
Consolidate the io-apic EOI code in clear_IO_APIC_pin() and eoi_ioapic_irq(). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Thomas Renninger <trenn@suse.de> Cc: Rafael Wysocki <rjw@novell.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: lchiquitto@novell.com Cc: jbeulich@novell.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110825190657.259696697@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21x86, ioapic: Restore the mask bit correctly in eoi_ioapic_irq()Suresh Siddha1-16/+27
For older IO-APIC's, we were clearing the remote-IRR by changing the RTE trigger mode to edge and then back to level. We wanted to mask the RTE during this process, so we were essentially doing mask+edge and then to unmask+level. As part of the commit ca64c47cecd0321b2e0dcbd7aaff44b68ce20654, we moved this EOI process earlier where the IO-APIC RTE is masked. So we were wrongly unmasking it in the eoi_ioapic_irq(). So change the remote-IRR clear sequence in eoi_ioapic_irq() to mask + edge and then restore the previous RTE entry which will restore the mask status as well as the level trigger. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Thomas Renninger <trenn@suse.de> Cc: Rafael Wysocki <rjw@novell.com> Cc: lchiquitto@novell.com Cc: jbeulich@novell.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110825190657.210286410@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21x86, kdump, ioapic: Reset remote-IRR in clear_IO_APICSuresh Siddha1-1/+47
In the kdump scenario mentioned below, we can have a case where the device using level triggered interrupt will not generate any interrupts in the kdump kernel. 1. IO-APIC sends a level triggered interrupt to the CPU's local APIC. 2. Kernel crashed before the CPU services this interrupt, leaving the remote-IRR in the IO-APIC set. 3. kdump kernel boot sequence does clear_IO_APIC() as part of IO-APIC initialization. But this fails to reset remote-IRR bit of the IO-APIC RTE as the remote-IRR bit is read-only. 4. Device using that level triggered entry can't generate any more interrupts because of the remote-IRR bit. In clear_IO_APIC_pin(), check if the remote-IRR bit is set and if so do an explicit attempt to clear it (by doing EOI write on modern io-apic's and changing trigger mode to edge/level on older io-apic's). Also before doing the explicit EOI to the io-apic, ensure that the trigger mode is indeed set to level. This will enable the explicit EOI to the io-apic to reset the remote-IRR bit. Tested-by: Leonardo Chiquitto <lchiquitto@novell.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Fixes: https://bugzilla.novell.com/show_bug.cgi?id=701686 Cc: Rafael Wysocki <rjw@novell.com> Cc: Maciej W. Rozycki <macro@linux-mips.org> Cc: Thomas Renninger <trenn@suse.de> Cc: jbeulich@novell.com Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110825190657.157502602@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21iommu: Rename the DMAR and INTR_REMAP config optionsSuresh Siddha2-5/+5
Change the CONFIG_DMAR to CONFIG_INTEL_IOMMU to be consistent with the other IOMMU options. Rename the CONFIG_INTR_REMAP to CONFIG_IRQ_REMAP to match the irq subsystem name. And define the CONFIG_DMAR_TABLE for the common ACPI DMAR routines shared by both CONFIG_INTEL_IOMMU and CONFIG_IRQ_REMAP. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: youquan.song@intel.com Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.558630224@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21x86, ioapic: Define irq_remap_modify_chip_defaults()Suresh Siddha1-45/+19
Define irq_remap_modify_chip_defaults() and remove the duplicate code, cleanup the unnecessary ifdefs. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: youquan.song@intel.com Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.499225692@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21x86, msi, intr-remap: Use the ioapic set affinity routineSuresh Siddha1-42/+12
IRQ set affinity routine is same for the IO-APIC IRQ's aswell as the MSI IRQ's in the presence of interrupt-remapping. This is because we modify the interrupt-remapping table entry and doesn't touch the IO-APIC RTE or the MSI entry. So remove the ir_msi_set_affinity() and re-use the ir_ioapic_set_affinity() Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: youquan.song@intel.com Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.452760446@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-09-21x86, x2apic: Enable the bios request for x2apic optoutSuresh Siddha1-16/+15
On the platforms which are x2apic and interrupt-remapping capable, Linux kernel is enabling x2apic even if the BIOS doesn't. This is to take advantage of the features that x2apic brings in. Some of the OEM platforms are running into issues because of this, as their bios is not x2apic aware. For example, this was resulting in interrupt migration issues on one of the platforms. Also if the BIOS SMI handling uses APIC interface to send SMI's, then the BIOS need to be aware of x2apic mode that OS has enabled. On some of these platforms, BIOS doesn't have a HW mechanism to turnoff the x2apic feature to prevent OS from enabling it. To resolve this mess, recent changes to the VT-d2 specification: http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf includes a mechanism that provides BIOS a way to request system software to opt out of enabling x2apic mode. Look at the x2apic optout flag in the DMAR tables before enabling the x2apic mode in the platform. Also print a warning that we have disabled x2apic based on the BIOS request. Kernel boot parameter "intremap=no_x2apic_optout" can be used to override the BIOS x2apic optout request. Signed-off-by: Youquan Song <youquan.song@intel.com> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: yinghai@kernel.org Cc: joerg.roedel@amd.com Cc: tony.luck@intel.com Cc: dwmw2@infradead.org Link: http://lkml.kernel.org/r/20110824001456.171766616@sbsiddha-desk.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-08-06x86, UV: Remove UV delay in starting slave cpusJack Steiner1-1/+0
Delete the 10 msec delay between the INIT and SIPI when starting slave cpus. I can find no requirement for this delay. BIOS also has similar code sequences without the delay. Removing the delay reduces boot time by 40 sec. Every bit helps. Signed-off-by: Jack Steiner <steiner@sgi.com> Cc: <stable@kernel.org> Link: http://lkml.kernel.org/r/20110805140900.GA6774@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-27atomic: use <linux/atomic.h>Arun Sharma2-2/+2
This allows us to move duplicated code in <asm/atomic.h> (atomic_inc_not_zero() for now) to <linux/atomic.h> Signed-off-by: Arun Sharma <asharma@fb.com> Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: David Miller <davem@davemloft.net> Cc: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-07-23Merge branches 'x86-detect-hyper-for-linus', 'x86-fpu-for-linus', ↵Linus Torvalds1-2/+20
'x86-kexec-for-linus', 'x86-platform-for-linus', 'x86-quirks-for-linus', 'x86-tsc-for-linus' and 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-detect-hyper-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, hyper: Change hypervisor detection order * 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86-32, fpu: Fix DNA exception during check_fpu() * 'x86-kexec-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: kexec, x86: Fix incorrect jump back address if not preserving context * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, config: Introduce an INTEL_MID configuration * 'x86-quirks-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, quirks: Use pci_dev->revision * 'x86-tsc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: tsc: Remove unneeded DMI-based blacklisting * 'x86-smpboot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, boot: Wait for boot cpu to show up if nr_cpus limit is about to hit
2011-07-23Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds2-26/+67
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, ioapic: Print IR_IO_APIC_route_entry when IR is enabled x86, ioapic: Print IRTE when IR is enabled x86, x2apic: Preserve high 32-bits of IA32_APIC_BASE MSR x86, ioapic: Also print Dest field x86, ioapic: Format clean up for IOAPIC output x86: print APIC data a little later during boot
2011-07-23Merge branch 'timers-cleanup-for-linus' of ↵Linus Torvalds1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-cleanup-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: mips: Fix i8253 clockevent fallout i8253: Cleanup outb/inb magic arm: Footbridge: Use common i8253 clockevent mips: Use common i8253 clockevent x86: Use common i8253 clockevent i8253: Create common clockevent implementation i8253: Export i8253_lock unconditionally pcpskr: MIPS: Make config dependencies finer grained pcspkr: Cleanup Kconfig dependencies i8253: Move remaining content and delete asm/i8253.h i8253: Consolidate definitions of PIT_LATCH x86: i8253: Consolidate definitions of global_clock_event i8253: Alpha, PowerPC: Remove unused asm/8253pit.h alpha: i8253: Cleanup remaining users of i8253pit.h i8253: Remove I8253_LOCK config i8253: Make pcsp sound driver use the shared i8253_lock i8253: Make pcspkr input driver use the shared i8253_lock i8253: Consolidate all kernel definitions of i8253_lock i8253: Unify all kernel declarations of i8253_lock i8253: Create linux/i8253.h and use it in all 8253 related files
2011-07-13x86, ioapic: Print IR_IO_APIC_route_entry when IR is enabledNaga Chumbalkar1-20/+49
When IR (interrupt remapping) is enabled print_IO_APIC() displays output according to legacy RTE (redirection table entry) definitons: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 00 1 0 0 0 0 0 0 00 01 00 0 0 0 0 0 0 0 01 02 00 0 0 0 0 0 0 0 02 03 00 1 0 0 0 0 0 0 03 04 00 1 0 0 0 0 0 0 04 05 00 1 0 0 0 0 0 0 05 06 00 1 0 0 0 0 0 0 06 ... The above output is as per Sec 3.2.4 of the IOAPIC datasheet: 82093AA I/O Advanced Programmable Interrupt Controller (IOAPIC): http://download.intel.com/design/chipsets/datashts/29056601.pdf Instead the output should display the fields as discussed in Sec 5.5.1 of the VT-d specification: (Intel Virtualization Technology for Directed I/O: http://download.intel.com/technology/computing/vptech/Intel(r)_VT_for_Direct_IO.pdf) After the fix: NR Indx Fmt Mask Trig IRR Pol Stat Indx2 Zero Vect: 00 0000 0 1 0 0 0 0 0 0 00 01 000F 1 0 0 0 0 0 0 0 01 02 0001 1 0 0 0 0 0 0 0 02 03 0002 1 1 0 0 0 0 0 0 03 04 0011 1 1 0 0 0 0 0 0 04 05 0004 1 1 0 0 0 0 0 0 05 06 0005 1 1 0 0 0 0 0 0 06 ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712211658.2939.93123.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13x86, ioapic: Print IRTE when IR is enabledNaga Chumbalkar1-0/+10
When "apic=debug" is used as a boot parameter, Linux prints the IOAPIC routing entries in "dmesg". Below is output from IOAPIC whose apic_id is 8: # dmesg | grep "routing entry" IOAPIC[8]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) IOAPIC[8]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) IOAPIC[8]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) ... Similarly, when IR (interrupt remapping) is enabled, and the IRTE (interrupt remapping table entry) is set up we should display it. After the fix: # dmesg | grep IRTE IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:31 Dest:00000000 SID:00F1 SQ:0 SVT:1) IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:30 Dest:00000000 SID:00F1 SQ:0 SVT:1) IOAPIC[8]: Set IRTE entry (P:1 FPD:0 Dst_Mode:0 Redir_hint:1 Trig_Mode:0 Dlvry_Mode:0 Avail:0 Vector:33 Dest:00000000 SID:00F1 SQ:0 SVT:1) ... The IRTE is defined in Sec 9.5 of the Intel VT-d Specification. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712211704.2939.71291.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-13x86, x2apic: Preserve high 32-bits of IA32_APIC_BASE MSRNaga Chumbalkar1-1/+1
If there's no special reason to zero-out the "high" 32-bits of the IA32_APIC_BASE MSR, let's preserve it. The x2APIC Specification doesn't explicitly state any such requirement. (Sec 2.2 in: http://www.intel.com/Assets/PDF/manual/318148.pdf). Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110712055831.2498.78521.sendpatchset@nchumbalkar.americas.cpqcorp.net Reviewed-by: Cyrill Gorcunov <gorcunov@openvz.org> Reviewed-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-11x86, ioapic: Also print Dest fieldNaga Chumbalkar1-2/+2
The code in setup_ioapic_irq() determines the Destination Field, so why not also include it in the debug printk output that gets displayed when the boot parameter "apic=debug" is used. Before the change, "dmesg" will show: IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0) IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0) IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0) ... After the change, you will see: IOAPIC[0]: Set routing entry (8-1 -> 0x31 -> IRQ 1 Mode:0 Active:0 Dest:0) IOAPIC[0]: Set routing entry (8-2 -> 0x30 -> IRQ 0 Mode:0 Active:0 Dest:0) IOAPIC[0]: Set routing entry (8-3 -> 0x33 -> IRQ 3 Mode:0 Active:0 Dest:0) ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708184603.2734.91071.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-11x86, ioapic: Format clean up for IOAPIC outputNaga Chumbalkar1-3/+5
When IOAPIC data is displayed in "dmesg" with the help of the boot parameter "apic=debug" certain values are not formatted correctly wrt their size. In the "dmesg" snippet below, note that the output for "max redirection entries", and "IO APIC version" which are each defined to be just 8-bits long are displayed as 2 bytes in length. Similarly, "Dst" under the "IRQ redirection table" should only be 8-bits long. IO APIC #0...... ... ... .... register #01: 00170020 ....... : max redirection entries: 0017 ....... : PRQ implemented: 0 ....... : IO APIC version: 0020 ... ... .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 1 0 0 0 0 0 0 33 ... ... Do some formatting clean up, so you will see output like below: IO APIC #0...... ... ... .... register #01: 00170020 ....... : max redirection entries: 17 ....... : PRQ implemented: 0 ....... : IO APIC version: 20 ... ... .... IRQ redirection table: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 00 1 0 0 0 0 0 0 00 01 00 0 0 0 0 0 0 0 31 02 00 0 0 0 0 0 0 0 30 03 00 1 0 0 0 0 0 0 33 ... ... Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708184557.2734.61830.sendpatchset@nchumbalkar.americas.cpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-07-09x86, boot: Wait for boot cpu to show up if nr_cpus limit is about to hitVivek Goyal1-2/+20
nr_cpus allows one to specify number of possible cpus in the system. Current assumption seems to be that first cpu to show up is boot cpu and this assumption will be broken in kdump scenario where we can be booting on a non boot cpu with nr_cpus=1. It might happen that first cpu we parse is not the cpu we boot on and later we ignore boot cpu. Though code later seems to recognize this anomaly and forcibly sets boot cpu in physical cpu map with following warning. if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) { printk(KERN_WARNING "weird, boot CPU (#%d) not listed by the BIOS.\n", hard_smp_processor_id()); physid_set(hard_smp_processor_id(), phys_cpu_present_map); } This patch waits for boot cpu to show up and starts ignoring the cpus once we have hit (nr_cpus - 1) number of cpus. So effectively we are reserving one slot out of nr_cpus for boot cpu explicitly. Signed-off-by: Vivek Goyal <vgoyal@redhat.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Link: http://lkml.kernel.org/r/20110708171926.GF2930@redhat.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-08x86: print APIC data a little later during bootNaga Chumbalkar1-1/+1
To view IOAPIC data you could boot with "apic=debug". When booting in such a way then the kernel will dump the IO-APIC's registers, for example: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 0 0 0 0 0 0 0 33 04 000 0 0 0 0 0 0 0 34 05 000 0 0 0 0 0 0 0 35 06 000 0 0 0 0 0 0 0 36 07 000 0 0 0 0 0 0 0 37 08 000 0 0 0 0 0 0 0 38 09 000 0 1 0 0 0 0 0 39 0a 000 0 0 0 0 0 0 0 3A 0b 000 0 0 0 0 0 0 0 3B 0c 000 0 0 0 0 0 0 0 3C 0d 000 0 0 0 0 0 0 0 3D 0e 000 0 0 0 0 0 0 0 3E 0f 000 0 0 0 0 0 0 0 3F 10 000 1 0 0 0 0 0 0 00 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 1 0 0 0 0 0 0 00 15 000 1 0 0 0 0 0 0 00 16 000 1 0 0 0 0 0 0 00 17 000 1 0 0 0 0 0 0 00 Delaying the call to print_ICs() gives better results: NR Dst Mask Trig IRR Pol Stat Dmod Deli Vect: 00 000 1 0 0 0 0 0 0 00 01 000 0 0 0 0 0 0 0 31 02 000 0 0 0 0 0 0 0 30 03 000 1 0 0 0 0 0 0 33 04 000 1 0 0 0 0 0 0 34 05 000 1 0 0 0 0 0 0 35 06 000 1 0 0 0 0 0 0 36 07 000 1 0 0 0 0 0 0 37 08 000 0 0 0 0 0 0 0 38 09 000 0 1 0 0 0 0 0 39 0a 000 1 0 0 0 0 0 0 3A 0b 000 1 0 0 0 0 0 0 3B 0c 000 0 0 0 0 0 0 0 3C 0d 000 1 0 0 0 0 0 0 3D 0e 000 1 0 0 0 0 0 0 3E 0f 000 1 0 0 0 0 0 0 3F 10 000 1 1 0 1 0 0 0 29 11 000 1 0 0 0 0 0 0 00 12 000 1 0 0 0 0 0 0 00 13 000 1 0 0 0 0 0 0 00 14 000 0 1 0 1 0 0 0 51 15 000 1 0 0 0 0 0 0 00 16 000 0 1 0 1 0 0 0 61 17 000 0 1 0 1 0 0 0 59 Notice that the entries beyond interrupt input signal 0x0f also get populated and arent just the hw-initialization default of all zeroes. Signed-off-by: Naga Chumbalkar <nagananda.chumbalkar@hp.com> Link: http://lkml.kernel.org/r/20110708083555.2598.42216.sendpatchset@nchumbalkar.americas.hpqcorp.net Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-06-14Merge branch 'drm-fixes' of ↵Linus Torvalds1-4/+4
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: Compare only lower 32 bits of framebuffer map offsets drm/i915: Don't leak in i915_gem_shmem_pread_slow() drm/radeon/kms: do bounds checking for 3D_LOAD_VBPNTR and bump array limit drm/radeon/kms: fix mac g5 quirk x86/uv/x2apic: update for change in pci bridge handling. alpha, drm: Remove obsolete Alpha support in MGA DRM code alpha/drm: Cleanup Alpha support in DRM generic code savage: remove unnecessary if statement drm/radeon: fix GUI idle IH debug statements drm/radeon/kms: check modes against max pixel clock drm: fix fbs in DRM_IOCTL_MODE_GETRESOURCES ioctl
2011-06-14x86/uv/x2apic: update for change in pci bridge handling.Dave Airlie1-4/+4
When I added 3448a19da479b6bd1e28e2a2be9fa16c6a6feb39 I forgot about the special uv handling code for this, so this patch fixes it up. Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org> Acked-by: Ingo Molnar Signed-off-by: Dave Airlie <airlied@redhat.com>
2011-06-09x86: i8253: Consolidate definitions of global_clock_eventRalf Baechle1-0/+1
There are multiple declarations of global_clock_event in header files specific to particular clock event implementations. Consolidate them in <asm/time.h> and make sure all users include that header. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Venkatesh Pallipadi (Venki) <venki@google.com> Link: http://lkml.kernel.org/r/20110601180610.762763451@duck.linux-mips.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-06-09i8253: Create linux/i8253.h and use it in all 8253 related filesRalf Baechle1-1/+1
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: linux-mips@linux-mips.org Link: http://lkml.kernel.org/r/20110601180610.054254048@duck.linux-mips.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de> arch/arm/mach-footbridge/isa-timer.c | 2 +- arch/mips/cobalt/time.c | 2 +- arch/mips/jazz/irq.c | 2 +- arch/mips/kernel/i8253.c | 2 +- arch/mips/mti-malta/malta-time.c | 2 +- arch/mips/sgi-ip22/ip22-time.c | 2 +- arch/mips/sni/time.c | 2 +- arch/x86/kernel/apic/apic.c | 2 +- arch/x86/kernel/apm_32.c | 2 +- arch/x86/kernel/hpet.c | 2 +- arch/x86/kernel/i8253.c | 2 +- arch/x86/kernel/time.c | 2 +- drivers/block/hd.c | 2 +- drivers/clocksource/i8253.c | 2 +- drivers/input/gameport/gameport.c | 2 +- drivers/input/joystick/analog.c | 2 +- drivers/input/misc/pcspkr.c | 2 +- include/linux/i8253.h | 11 +++++++++++ sound/drivers/pcsp/pcsp.h | 2 +- 19 files changed, 29 insertions(+), 18 deletions(-)
2011-06-08Merge branch 'urgent' of ↵Ingo Molnar1-1/+2
git://git.kernel.org/pub/scm/linux/kernel/git/rric/oprofile into perf/urgent
2011-05-30oprofile, x86: Add comments to IBS LVT offset initializationRobert Richter1-1/+2
Adding a comment in the code as IBS LVT setup is not obvious at all ... Signed-off-by: Robert Richter <robert.richter@amd.com>
2011-05-25x86, UV: Add support for SGI UV2 hub chipJack Steiner1-9/+31
This patch adds support for a new version of the SGI UV hub chip. The hub chip is the node controller that connects multiple blades into a larger coherent SSI. For the most part, UV2 is compatible with UV1. The majority of the changes are in the addresses of MMRs and in a few cases, the contents of MMRs. These changes are the result in changes in the system topology such as node configuration, processor types, maximum nodes, physical address sizes, etc. Signed-off-by: Jack Steiner <steiner@sgi.com> Link: http://lkml.kernel.org/r/20110511175028.GA18006@sgi.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-24x86, ioapic: Restore ioapic entries during resume properlySuresh Siddha1-2/+2
In mask/restore_ioapic_entries() we should be restoring ioapic entries when ioapics[apic].saved_registers is not NULL. Fix the typo and address the resume hang regression reported by Linus. This was not found sooner because the systems where these changes were tested on kept the IO-APIC entries intact over resume. Reported-and-tested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Cc: Daniel J Blueman <daniel.blueman@gmail.com> Link: http://lkml.kernel.org/r/1306259131.7171.7.camel@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-23Merge branch 'x86-apic-for-linus' of ↵Linus Torvalds13-530/+430
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86, apic: Include module.h header in apic_flat_64.c x86, apic: Make apic drivers static x86, apic: Clean up bigsmp apic selection code x86, apic: Use .apicdrivers section for the apic drivers list x86, apic: Introduce .apicdrivers section to find the list of apic drivers x86, x2apic: Move the common bits to x2apic.h x86, x2apic: Minimize IPI register writes using cluster groups x86, x2apic: Track the x2apic cluster sibling map x86, x2apic: Remove duplicate code for IPI mask routines x86, apic: Use probe routines to simplify apic selection x86, ioapic: Consolidate mp_ioapic_routing[] into 'struct ioapic' x86, ioapic: Consolidate gsi routing info into 'struct ioapic' x86, ioapic: Consolidate mp_ioapics[] into 'struct ioapic' x86, ioapic: Consolidate ioapic_saved_data[] into 'struct ioapic' x86, ioapic: Add struct ioapic x86, ioapic: Remove duplicate code for saving/restoring RTEs x86, ioapic: Use ioapic_saved_data while enabling intr-remapping x86, ioapic: Allocate ioapic_saved_data early x86, ioapic: Fix potential resume deadlock
2011-05-23x86, apic: Include module.h header in apic_flat_64.cRandy Dunlap1-0/+1
apic_flat_64.c needs to include module.h because it uses EXPORT_SYMBOL_GPL(). This fixes these warnings on some !SMP randconfigs: arch/x86/kernel/apic/apic_flat_64.c:31: warning: data definition has no type or storage class arch/x86/kernel/apic/apic_flat_64.c:31: warning: type defaults to 'int' in declaration of 'EXPORT_SYMBOL_GPL' arch/x86/kernel/apic/apic_flat_64.c:31: warning: parameter names (without types) in function declaration Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stephen Rothwell <sfr@canb.auug.org.au> Link: http://lkml.kernel.org/r/20110523104300.dd532a99.randy.dunlap@oracle.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-23watchdog: Change the default timeout and configure nmi watchdog period based ↵Mandeep Singh Baines1-2/+2
on watchdog_thresh Before the conversion of the NMI watchdog to perf event, the watchdog timeout was 5 seconds. Now it is 60 seconds. For my particular application, netbooks, 5 seconds was a better timeout. With a short timeout, we catch faults earlier and are able to send back a panic. With a 60 second timeout, the user is unlikely to wait and will instead hit the power button, causing us to lose the panic info. This change configures the NMI period to watchdog_thresh and sets the softlockup_thresh to watchdog_thresh * 2. In addition, watchdog_thresh was reduced to 10 seconds as suggested by Ingo Molnar. Signed-off-by: Mandeep Singh Baines <msb@chromium.org> Cc: Marcin Slusarz <marcin.slusarz@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Frederic Weisbecker <fweisbec@gmail.com> Link: http://lkml.kernel.org/r/1306127423-3347-4-git-send-email-msb@chromium.org Signed-off-by: Ingo Molnar <mingo@elte.hu> LKML-Reference: <20110517071642.GF22305@elte.hu>
2011-05-22x86, apic: Make apic drivers staticSuresh Siddha10-57/+22
Apic probe now looks at the apic drivers listed in the .apicdrivers section. Remove apic_probe[] and make each apic driver static. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.341718626@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-22x86, apic: Clean up bigsmp apic selection codeSuresh Siddha2-29/+31
Make generic_bigsmp_probe() return struct apic *. This will avoid exporting apic_bigsmp, which will be consistent with others. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.252703851@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-22x86, apic: Use .apicdrivers section for the apic drivers listSuresh Siddha2-31/+36
This will eliminate the need for apic_probe[], as the probing now will happen based on the apic drivers order in the .apcidrivers section. Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.164277071@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-05-22x86, apic: Introduce .apicdrivers section to find the list of apic driversSuresh Siddha10-6/+36
This will pave the way for each apic driver to be self-contained and eliminate the need for apic_probe[]. Order in which apic drivers are listed in the .apicdrivers section is important, as this determines the apic probe order. And this is enforced by the ordering of apic driver files in the Makefile and the macros apic_driver()/apic_drivers(). Signed-off-by: Suresh Siddha <suresh.b.siddha@intel.com> Tested-by: Cyrill Gorcunov <gorcunov@openvz.org> Cc: steiner@sgi.com Cc: gorcunov@openvz.org Cc: yinghai@kernel.org Link: http://lkml.kernel.org/r/20110521005526.068775085@sbsiddha-MOBL3.sc.intel.com Signed-off-by: Ingo Molnar <mingo@elte.hu>
generated by cgit v1.2.3 (git 2.39.0) at 2024-12-05 03:55:11 +0300