summaryrefslogtreecommitdiff
path: root/arch/x86/kernel/apb_timer.c
AgeCommit message (Collapse)AuthorFilesLines
2013-10-18intel_mid: Renamed *mrst* to *intel_mid*Kuppuswamy Sathyanarayanan1-4/+4
mrst is used as common name to represent all intel_mid type soc's. But moorsetwon is just one of the intel_mid soc. So renamed them to use intel_mid. This patch mainly renames the variables and related functions that uses *mrst* prefix with *intel_mid*. To ensure that there are no functional changes, I have compared the objdump of related files before and after rename and found the only difference is symbol and name changes. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: http://lkml.kernel.org/r/1382049336-21316-6-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-10-18intel_mid: Renamed *mrst* to *intel_mid*Kuppuswamy Sathyanarayanan1-1/+1
Following files contains code that is common to all intel mid soc's. So renamed them as below. mrst/mrst.c -> intel-mid/intel-mid.c mrst/vrtc.c -> intel-mid/intel_mid_vrtc.c mrst/early_printk_mrst.c -> intel-mid/intel_mid_vrtc.c pci/mrst.c -> pci/intel_mid_pci.c Also, renamed the corresponding header files and made changes to the driver files that included these header files. To ensure that there are no functional changes, I have compared the objdump of renamed files before and after rename and found that the only difference is file name change. Signed-off-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com> Link: http://lkml.kernel.org/r/1382049336-21316-4-git-send-email-david.a.cohen@linux.intel.com Signed-off-by: David Cohen <david.a.cohen@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2013-02-20Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 platform changes from Ingo Molnar: - Support for the Technologic Systems TS-5500 platform, by Vivien Didelot - Improved NUMA support on AMD systems: Add support for federated systems where multiple memory controllers can exist and see each other over multiple PCI domains. This basically means that AMD node ids can be more than 8 now and the code handling this is taught to incorporate PCI domain into those IDs. - Support for the Goldfish virtual Android emulator, by Jun Nakajima, Intel, Google, et al. - Misc fixlets. * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86: Add TS-5500 platform support x86/srat: Simplify memory affinity init error handling x86/apb/timer: Remove unnecessary "if" goldfish: platform device for x86 amd64_edac: Fix type usage in NB IDs and memory ranges amd64_edac: Fix PCI function lookup x86, AMD, NB: Use u16 for northbridge IDs in amd_get_nb_id x86, AMD, NB: Add multi-domain support
2013-01-24x86/apb/timer: Remove unnecessary "if"Cong Ding1-1/+1
adev has no chance to be NULL, so we don't need to check it. It is also dereferenced just before the check . Signed-off-by: Cong Ding <dinggnu@gmail.com> Cc: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/r/1358199561-15518-1-git-send-email-dinggnu@gmail.com Signed-off-by: Ingo Molnar <mingo@kernel.org>
2012-12-20x86, apb_timer: remove unused variable percpu_timerSasha Levin1-6/+2
Signed-off-by: Sasha Levin <sasha.levin@oracle.com> Link: http://lkml.kernel.org/r/1356030701-16284-28-git-send-email-sasha.levin@oracle.com Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2011-07-23Merge branch 'timers-clocksource-for-linus' of ↵Linus Torvalds1-340/+69
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'timers-clocksource-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: clocksource: apb: Share APB timer code with other platforms
2011-06-28clocksource: apb: Share APB timer code with other platformsJamie Iles1-340/+69
The APB timers are an IP block from Synopsys (DesignWare APB timers) and are also found in other systems including ARM SoC's. This patch adds functions for creating clock_event_devices and clocksources from APB timers but does not do the resource allocation. This is handled in a higher layer to allow the timers to be created from multiple methods such as platform_devices. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: Jamie Iles <jamie@jamieiles.com> Signed-off-by: John Stultz <john.stultz@linaro.org>
2011-06-09x86: i8253: Consolidate definitions of global_clock_eventRalf Baechle1-0/+1
There are multiple declarations of global_clock_event in header files specific to particular clock event implementations. Consolidate them in <asm/time.h> and make sure all users include that header. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Cc: Venkatesh Pallipadi (Venki) <venki@google.com> Link: http://lkml.kernel.org/r/20110601180610.762763451@duck.linux-mips.net Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-05-14Merge branch 'consolidate-clksrc-i8253' of ↵Thomas Gleixner1-58/+6
master.kernel.org:~rmk/linux-2.6-arm into timers/clocksource Conflicts: arch/ia64/kernel/cyclone.c arch/mips/kernel/i8253.c arch/x86/kernel/i8253.c Reason: Resolve conflicts so further cleanups do not conflict further Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-30x86: apb_timer: Fixup genirq falloutThomas Gleixner1-1/+1
The lonely user of the internal interface was not in the coccinelle script. Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-03-16Merge branch 'x86-platform-for-linus' of ↵Linus Torvalds1-56/+4
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (27 commits) x86: Clean up apic.c and apic.h x86: Remove superflous goal definition of tsc_sync x86: dt: Correct local apic documentation in device tree bindings x86: dt: Cleanup local apic setup x86: dt: Fix OLPC=y/INTEL_CE=n build rtc: cmos: Add OF bindings x86: ce4100: Use OF to setup devices x86: ioapic: Add OF bindings for IO_APIC x86: dtb: Add generic bus probe x86: dtb: Add support for PCI devices backed by dtb nodes x86: dtb: Add device tree support for HPET x86: dtb: Add early parsing of IO_APIC x86: dtb: Add irq domain abstraction x86: dtb: Add a device tree for CE4100 x86: Add device tree support x86: e820: Remove conditional early mapping in parse_e820_ext x86: OLPC: Make OLPC=n build again x86: OLPC: Remove extra OLPC_OPENFIRMWARE_DT indirection x86: OLPC: Cleanup config maze completely x86: OLPC: Hide OLPC_OPENFIRMWARE config switch ... Fix up conflicts in arch/x86/platform/ce4100/ce4100.c
2011-02-24x86/mrst: Fix apb timer rating when lapic timer is usedJacob Pan1-1/+1
Need to adjust the clockevent device rating for the structure that will be registered with clockevent system instead of the temporary structure. Without this fix, APB timer rating will be higher than LAPIC timer such that it can not be released later to be used as the broadcast timer. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Alan Cox <alan@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: John Stultz <john.stultz@linaro.org> LKML-Reference: <1298506046-439-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2011-02-22Merge branch 'devicetree/for-x86' of git://git.secretlab.ca/git/linux-2.6 ↵Thomas Gleixner1-6/+8
into x86/platform Reason: x86 devicetree support for ce4100 depends on those device tree changes scheduled for .39. Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-02-22x86: Convert remaining x86 clocksources to clocksource_register_hz/khzJohn Stultz1-9/+1
This converts the remaining x86 clocksources to use clocksource_register_hz/khz. CC: jacob.jun.pan@intel.com CC: Glauber Costa <glommer@redhat.com> CC: Dimitri Sivanich <sivanich@sgi.com> CC: Rusty Russell <rusty@rustcorp.com.au> CC: Jeremy Fitzhardinge <jeremy@xensource.com> CC: Chris McDermott <lcm@us.ibm.com> CC: Thomas Gleixner <tglx@linutronix.de> Tested-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> [xen] Signed-off-by: John Stultz <johnstul@us.ibm.com>
2011-02-19x86: mrst: Remove apb timer read workaroundjacob.jun.pan@linux.intel.com1-56/+4
APB timer current count was unreliable in the earlier silicon, which could result in time going backwards. This problem has been fixed in the current silicon stepping. This patch removes the workaround which was used to check and prevent timer rolling back when APB timer is used as clocksource device. The workaround code was also flawed by potential race condition around the cached read value last_read. Though a fix can be done by assigning last_read to a local variable at the beginning of apbt_read_clocksource(), but this is not necessary anymore. [ tglx: A sane timer on an Intel chip - I can't believe it ] Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Alan Cox <alan@linux.intel.com> LKML-Reference: <1298065374-25532-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2011-01-14x86, mrst: Set correct APB timer IRQ affinity for secondary cpuJacob Pan1-6/+8
Offlining the secondary CPU causes the timer irq affinity to be set to CPU 0. When the secondary CPU is back online again, the wrong irq affinity will be used. This patch ensures secondary per CPU timer always has the correct IRQ affinity when enabled. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> LKML-Reference: <1294963604-18111-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com> Cc: <stable@kernel.org> 2.6.37
2010-12-06x86, apbt: Setup affinity for apb timers acting as per-cpu timerFeng Tang1-0/+1
Commit a5ef2e70 "x86: Sanitize apb timer interrupt handling" forgot the affinity setup when cleaning up the code, this patch just adds the forgotten part Signed-off-by: Feng Tang <feng.tang@intel.com> Cc: Jacob Pan <jacob.jun.pan@intel.com> Cc: Alan Cox <alan@linux.intel.com> LKML-Reference: <1291348298-21263-2-git-send-email-feng.tang@intel.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2010-10-22Merge branch 'irq-core-for-linus' of ↵Linus Torvalds1-30/+24
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (96 commits) apic, x86: Use BIOS settings for IBS and MCE threshold interrupt LVT offsets apic, x86: Check if EILVT APIC registers are available (AMD only) x86: ioapic: Call free_irte only if interrupt remapping enabled arm: Use ARCH_IRQ_INIT_FLAGS genirq, ARM: Fix boot on ARM platforms genirq: Fix CONFIG_GENIRQ_NO_DEPRECATED=y build x86: Switch sparse_irq allocations to GFP_KERNEL genirq: Switch sparse_irq allocator to GFP_KERNEL genirq: Make sparse_lock a mutex x86: lguest: Use new irq allocator genirq: Remove the now unused sparse irq leftovers genirq: Sanitize dynamic irq handling genirq: Remove arch_init_chip_data() x86: xen: Sanitise sparse_irq handling x86: Use sane enumeration x86: uv: Clean up the direct access to irq_desc x86: Make io_apic.c local functions static genirq: Remove irq_2_iommu x86: Speed up the irq_remapped check in hot pathes intr_remap: Simplify the code further ... Fix up trivial conflicts in arch/x86/Kconfig
2010-10-22Merge branch 'x86-debug-for-linus' of ↵Linus Torvalds1-2/+2
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-debug-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: x86: Remove pr_<level> uses of KERN_<level> therm_throt.c: Trivial printk message fix for a unsuitable abbreviation of 'thermal' x86: Use {push,pop}{l,q}_cfi in more places i386: Add unwind directives to syscall ptregs stubs x86-64: Use symbolics instead of raw numbers in entry_64.S x86-64: Adjust frame type at paranoid_exit: x86-64: Fix unwind annotations in syscall stubs
2010-10-12x86: Sanitize apb timer interrupt handlingThomas Gleixner1-30/+24
Disable the interrupt in CPU_DEAD where it belongs. Remove the open coded irq_desc manipulation. Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Ingo Molnar <mingo@elte.hu> Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
2010-09-12x86: Remove pr_<level> uses of KERN_<level>Joe Perches1-2/+2
Signed-off-by: Joe Perches <joe@perches.com> Cc: Jiri Kosina <trivial@kernel.org> LKML-Reference: <d40c60f4b036a26db8492848695bdafaa3b42791.1284267142.git.joe@perches.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2010-08-13x86, cleanup: Remove obsolete boot_cpu_id variableRobert Richter1-1/+1
boot_cpu_id is there for historical reasons and was renamed to boot_cpu_physical_apicid in patch: c70dcb7 x86: change boot_cpu_id to boot_cpu_physical_apicid However, there are some remaining occurrences of boot_cpu_id that are never touched in the kernel and thus its value is always 0. This patch removes boot_cpu_id completely. Signed-off-by: Robert Richter <robert.richter@amd.com> LKML-Reference: <1279731838-1522-8-git-send-email-robert.richter@amd.com> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-05-20x86, mrst: add more timer config optionsJacob Pan1-29/+8
Always-on local APIC timer (ARAT) has been introduced to Medfield, along with the platform APB timers we have more timer configuration options between Moorestown and Medfield. This patch adds run-time detection of avaiable timer features so that we can treat Medfield as a variant of Moorestown and set up the optimal timer options for each platform. i.e. Medfield: per cpu always-on local APIC timer Moorestown: per cpu APB timer Manual override is possible via cmdline option x86_mrst_timer. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> LKML-Reference: <1274295685-6774-4-git-send-email-jacob.jun.pan@linux.intel.com> Acked-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>
2010-04-21x86, mrst: Conditionally register cpu hotplug notifier for apbtJacob Pan1-1/+1
APB timer is used on Moorestown platforms but not on a standard PC. If APB timer code is compiled in but not initialized at run-time due to lack of FW reported SFI table, kernel would panic when the non-boot CPUs are offlined and notifier is called. https://bugzilla.kernel.org/show_bug.cgi?id=15786 This patch ensures CPU hotplug notifier for APB timer is only registered when the APBT timer block is initialized. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> LKML-Reference: <1271701423-1162-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo1-0/+1
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-08Merge branch 'x86-mrst-for-linus' of ↵Linus Torvalds1-0/+784
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'x86-mrst-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (30 commits) x86, mrst: Fix whitespace breakage in apb_timer.c x86, mrst: Fix APB timer per cpu clockevent x86, mrst: Remove X86_MRST dependency on PCI_IOAPIC x86, olpc: Use pci subarch init for OLPC x86, pci: Add arch_init to x86_init abstraction x86, mrst: Add Kconfig dependencies for Moorestown x86, pci: Exclude Moorestown PCI code if CONFIG_X86_MRST=n x86, numaq: Make CONFIG_X86_NUMAQ depend on CONFIG_PCI x86, pci: Add sanity check for PCI fixed bar probing x86, legacy_irq: Remove duplicate vector assigment x86, legacy_irq: Remove left over nr_legacy_irqs x86, mrst: Platform clock setup code x86, apbt: Moorestown APB system timer driver x86, mrst: Add vrtc platform data setup code x86, mrst: Add platform timer info parsing code x86, mrst: Fill in PCI functions in x86_init layer x86, mrst: Add dummy legacy pic to platform setup x86/PCI: Moorestown PCI support x86, ioapic: Add dummy ioapic functions x86, ioapic: Early enable ioapic for timer irq ... Fixed up semantic conflict of new clocksources due to commit 17622339af25 ("clocksource: add argument to resume callback").
2010-03-04x86, mrst: Fix whitespace breakage in apb_timer.cH. Peter Anvin1-534/+534
Checkin bb24c4716185f6e116c440462c65c1f56649183b: "Moorestown APB system timer driver" suffered from severe whitespace damage in arch/x86/kernel/apb_timer.c due to using Microsoft Lookout to send a patch. Fix the whitespace breakage. Reported-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-03-03x86, mrst: Fix APB timer per cpu clockeventJacob Pan1-4/+8
The current APB timer code incorrectly registers a static copy of the clockevent device for the boot CPU. The per cpu clockevent should be used instead. This bug was hidden by zero-initialized data; as such it did not get exposed in testing, but was discovered by code review. Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> LKML-Reference: <1267592494-7723-1-git-send-email-jacob.jun.pan@linux.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>
2010-02-24x86, apbt: Moorestown APB system timer driverJacob Pan1-0/+780
Moorestown platform does not have PIT or HPET platform timers. Instead it has a bank of eight APB timers. The number of available timers to the os is exposed via SFI mtmr tables. All APB timer interrupts are routed via ioapic rtes and delivered as MSI. Currently, we use timer 0 and 1 for per cpu clockevent devices, timer 2 for clocksource. Signed-off-by: Jacob Pan <jacob.jun.pan@intel.com> LKML-Reference: <43F901BD926A4E43B106BF17856F0755A318D2D2@orsmsx508.amr.corp.intel.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com>