summaryrefslogtreecommitdiff
path: root/arch/x86/include/asm/kvm_host.h
AgeCommit message (Collapse)AuthorFilesLines
2019-11-04kvm: x86: mmu: Recovery of shattered NX large pagesJunaid Shahid1-0/+4
The page table pages corresponding to broken down large pages are zapped in FIFO order, so that the large page can potentially be recovered, if it is not longer being used for execution. This removes the performance penalty for walking deeper EPT page tables. By default, one large page will last about one hour once the guest reaches a steady state. Signed-off-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-11-04kvm: mmu: ITLB_MULTIHIT mitigationPaolo Bonzini1-0/+2
With some Intel processors, putting the same virtual address in the TLB as both a 4 KiB and 2 MiB page can confuse the instruction fetch unit and cause the processor to issue a machine check resulting in a CPU lockup. Unfortunately when EPT page tables use huge pages, it is possible for a malicious guest to cause this situation. Add a knob to mark huge pages as non-executable. When the nx_huge_pages parameter is enabled (and we are using EPT), all huge pages are marked as NX. If the guest attempts to execute in one of those pages, the page is broken down into 4K pages, which are then marked executable. This is not an issue for shadow paging (except nested EPT), because then the host is in control of TLB flushes and the problematic situation cannot happen. With nested EPT, again the nested guest can cause problems shadow and direct EPT is treated in the same way. [ tglx: Fixup default to auto and massage wording a bit ] Originally-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2019-10-22KVM: nVMX: Don't leak L1 MMIO regions to L2Jim Mattson1-1/+1
If the "virtualize APIC accesses" VM-execution control is set in the VMCS, the APIC virtualization hardware is triggered when a page walk in VMX non-root mode terminates at a PTE wherein the address of the 4k page frame matches the APIC-access address specified in the VMCS. On hardware, the APIC-access address may be any valid 4k-aligned physical address. KVM's nVMX implementation enforces the additional constraint that the APIC-access address specified in the vmcs12 must be backed by a "struct page" in L1. If not, L0 will simply clear the "virtualize APIC accesses" VM-execution control in the vmcs02. The problem with this approach is that the L1 guest has arranged the vmcs12 EPT tables--or shadow page tables, if the "enable EPT" VM-execution control is clear in the vmcs12--so that the L2 guest physical address(es)--or L2 guest linear address(es)--that reference the L2 APIC map to the APIC-access address specified in the vmcs12. Without the "virtualize APIC accesses" VM-execution control in the vmcs02, the APIC accesses in the L2 guest will directly access the APIC-access page in L1. When there is no mapping whatsoever for the APIC-access address in L1, the L2 VM just loses the intended APIC virtualization. However, when the APIC-access address is mapped to an MMIO region in L1, the L2 guest gets direct access to the L1 MMIO device. For example, if the APIC-access address specified in the vmcs12 is 0xfee00000, then L2 gets direct access to L1's APIC. Since this vmcs12 configuration is something that KVM cannot faithfully emulate, the appropriate response is to exit to userspace with KVM_INTERNAL_ERROR_EMULATION. Fixes: fe3ef05c7572 ("KVM: nVMX: Prepare vmcs02 from vmcs01 and vmcs12") Reported-by: Dan Cross <dcross@google.com> Signed-off-by: Jim Mattson <jmattson@google.com> Reviewed-by: Peter Shier <pshier@google.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-27KVM: x86: assign two bits to track SPTE kindsPaolo Bonzini1-7/+0
Currently, we are overloading SPTE_SPECIAL_MASK to mean both "A/D bits unavailable" and MMIO, where the difference between the two is determined by mio_mask and mmio_value. However, the next patch will need two bits to distinguish availability of A/D bits from write protection. So, while at it give MMIO its own bit pattern, and move the two bits from bit 62 to bits 52..53 since Intel is allocating EPT page table bits from the top. Reviewed-by: Junaid Shahid <junaids@google.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-25KVM: x86: Don't check kvm_rebooting in __kvm_handle_fault_on_reboot()Sean Christopherson1-7/+1
Remove the kvm_rebooting check from VMX/SVM instruction exception fixup now that kvm_spurious_fault() conditions its BUG() on !kvm_rebooting. Because the 'cleanup_insn' functionally is also gone, deferring to kvm_spurious_fault() means __kvm_handle_fault_on_reboot() can eliminate its .fixup code entirely and have its exception table entry branch directly to the call to kvm_spurious_fault(). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-25KVM: x86: Drop ____kvm_handle_fault_on_reboot()Sean Christopherson1-5/+1
Remove the variation of __kvm_handle_fault_on_reboot() that accepts a post-fault cleanup instruction now that its sole user (VMREAD) uses a different method for handling faults. Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-25KVM: x86: Check kvm_rebooting in kvm_spurious_fault()Sean Christopherson1-1/+1
Explicitly check kvm_rebooting in kvm_spurious_fault() prior to invoking BUG(), as opposed to assuming the caller has already done so. Letting kvm_spurious_fault() be called "directly" will allow VMX to better optimize its low level assembly flows. As a happy side effect, kvm_spurious_fault() no longer needs to be marked as a dead end since it doesn't unconditionally BUG(). Acked-by: Paolo Bonzini <pbonzini@redhat.com> Cc: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-24KVM: x86/mmu: Explicitly track only a single invalid mmu generationSean Christopherson1-2/+2
Toggle mmu_valid_gen between '0' and '1' instead of blindly incrementing the generation. Because slots_lock is held for the entire duration of zapping obsolete pages, it's impossible for there to be multiple invalid generations associated with shadow pages at any given time. Toggling between the two generations (valid vs. invalid) allows changing mmu_valid_gen from an unsigned long to a u8, which reduces the size of struct kvm_mmu_page from 160 to 152 bytes on 64-bit KVM, i.e. reduces KVM's memory footprint by 8 bytes per shadow page. Set sp->mmu_valid_gen before it is added to active_mmu_pages. Functionally this has no effect as kvm_mmu_alloc_page() has a single caller that sets sp->mmu_valid_gen soon thereafter, but visually it is jarring to see a shadow page being added to the list without its mmu_valid_gen first being set. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-24KVM: x86/mmu: Revert "Revert "KVM: MMU: reclaim the zapped-obsolete page first""Sean Christopherson1-0/+1
Now that the fast invalidate mechanism has been reintroduced, restore the performance tweaks for fast invalidation that existed prior to its removal. Paraphrashing the original changelog: Introduce a per-VM list to track obsolete shadow pages, i.e. pages which have been deleted from the mmu cache but haven't yet been freed. When page reclaiming is needed, zap/free the deleted pages first. This reverts commit 52d5dedc79bdcbac2976159a172069618cf31be5. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-24KVM: x86: Add comments to document various emulation typesSean Christopherson1-0/+30
Document the intended usage of each emulation type as each exists to handle an edge case of one kind or another and can be easily misinterpreted at first glance. Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-24KVM: x86: Remove emulation_result enums, EMULATE_{DONE,FAIL,USER_EXIT}Sean Christopherson1-6/+0
Deferring emulation failure handling (in some cases) to the caller of x86_emulate_instruction() has proven fragile, e.g. multiple instances of KVM not setting run->exit_reason on EMULATE_FAIL, largely due to it being difficult to discern what emulation types can return what result, and which combination of types and results are handled where. Now that x86_emulate_instruction() always handles emulation failure, i.e. EMULATION_FAIL is only referenced in callers, remove the emulation_result enums entirely. Per KVM's existing exit handling conventions, return '0' and '1' for "exit to userspace" and "resume guest" respectively. Doing so cleans up many callers, e.g. they can return kvm_emulate_instruction() directly instead of having to interpret its result. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-24KVM: x86: Add explicit flag for forced emulation on #UDSean Christopherson1-0/+1
Add an explicit emulation type for forced #UD emulation and use it to detect that KVM should unconditionally inject a #UD instead of falling into its standard emulation failure handling. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-24KVM: x86: Move #GP injection for VMware into x86_emulate_instruction()Sean Christopherson1-2/+1
Immediately inject a #GP when VMware emulation fails and return EMULATE_DONE instead of propagating EMULATE_FAIL up the stack. This helps pave the way for removing EMULATE_FAIL altogether. Rename EMULTYPE_VMWARE to EMULTYPE_VMWARE_GP to document that the x86 emulator is called to handle VMware #GP interception, e.g. why a #GP is injected on emulation failure for EMULTYPE_VMWARE_GP. Drop EMULTYPE_NO_UD_ON_FAIL as a standalone type. The "no #UD on fail" is used only in the VMWare case and is obsoleted by having the emulator itself reinject #GP. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-24KVM/Hyper-V/VMX: Add direct tlb flush supportVitaly Kuznetsov1-0/+2
Hyper-V provides direct tlb flush function which helps L1 Hypervisor to handle Hyper-V tlb flush request from L2 guest. Add the function support for VMX. Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-24KVM/Hyper-V: Add new KVM capability KVM_CAP_HYPERV_DIRECT_TLBFLUSHTianyu Lan1-0/+1
Hyper-V direct tlb flush function should be enabled for guest that only uses Hyper-V hypercall. User space hypervisor(e.g, Qemu) can disable KVM identification in CPUID and just exposes Hyper-V identification to make sure the precondition. Add new KVM capability KVM_CAP_ HYPERV_DIRECT_TLBFLUSH for user space to enable Hyper-V direct tlb function and this function is default to be disabled in KVM. Signed-off-by: Tianyu Lan <Tianyu.Lan@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-18Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-4/+15
Pull KVM updates from Paolo Bonzini: "s390: - ioctl hardening - selftests ARM: - ITS translation cache - support for 512 vCPUs - various cleanups and bugfixes PPC: - various minor fixes and preparation x86: - bugfixes all over the place (posted interrupts, SVM, emulation corner cases, blocked INIT) - some IPI optimizations" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (75 commits) KVM: X86: Use IPI shorthands in kvm guest when support KVM: x86: Fix INIT signal handling in various CPU states KVM: VMX: Introduce exit reason for receiving INIT signal on guest-mode KVM: VMX: Stop the preemption timer during vCPU reset KVM: LAPIC: Micro optimize IPI latency kvm: Nested KVM MMUs need PAE root too KVM: x86: set ctxt->have_exception in x86_decode_insn() KVM: x86: always stop emulation on page fault KVM: nVMX: trace nested VM-Enter failures detected by H/W KVM: nVMX: add tracepoint for failed nested VM-Enter x86: KVM: svm: Fix a check in nested_svm_vmrun() KVM: x86: Return to userspace with internal error on unexpected exit reason KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM code KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callers doc: kvm: Fix return description of KVM_SET_MSRS KVM: X86: Tune PLE Window tracepoint KVM: VMX: Change ple_window type to unsigned int KVM: X86: Remove tailing newline for tracepoints KVM: X86: Trace vcpu_id for vmexit KVM: x86: Manually calculate reserved bits when loading PDPTRS ...
2019-09-14KVM: x86/mmu: Reintroduce fast invalidate/zap for flushing memslotSean Christopherson1-0/+2
James Harvey reported a livelock that was introduced by commit d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot""). The livelock occurs because kvm_mmu_zap_all() as it exists today will voluntarily reschedule and drop KVM's mmu_lock, which allows other vCPUs to add shadow pages. With enough vCPUs, kvm_mmu_zap_all() can get stuck in an infinite loop as it can never zap all pages before observing lock contention or the need to reschedule. The equivalent of kvm_mmu_zap_all() that was in use at the time of the reverted commit (4e103134b8623, "KVM: x86/mmu: Zap only the relevant pages when removing a memslot") employed a fast invalidate mechanism and was not susceptible to the above livelock. There are three ways to fix the livelock: - Reverting the revert (commit d012a06ab1d23) is not a viable option as the revert is needed to fix a regression that occurs when the guest has one or more assigned devices. It's unlikely we'll root cause the device assignment regression soon enough to fix the regression timely. - Remove the conditional reschedule from kvm_mmu_zap_all(). However, although removing the reschedule would be a smaller code change, it's less safe in the sense that the resulting kvm_mmu_zap_all() hasn't been used in the wild for flushing memslots since the fast invalidate mechanism was introduced by commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages"), back in 2013. - Reintroduce the fast invalidate mechanism and use it when zapping shadow pages in response to a memslot being deleted/moved, which is what this patch does. For all intents and purposes, this is a revert of commit ea145aacf4ae8 ("Revert "KVM: MMU: fast invalidate all pages"") and a partial revert of commit 7390de1e99a70 ("Revert "KVM: x86: use the fast way to invalidate all pages""), i.e. restores the behavior of commit 5304b8d37c2a5 ("KVM: MMU: fast invalidate all pages") and commit 6ca18b6950f8d ("KVM: x86: use the fast way to invalidate all pages") respectively. Fixes: d012a06ab1d23 ("Revert "KVM: x86/mmu: Zap only the relevant pages when removing a memslot"") Reported-by: James Harvey <jamespharvey20@gmail.com> Cc: Alex Willamson <alex.williamson@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-11KVM: x86: Fix INIT signal handling in various CPU statesLiran Alon1-0/+2
Commit cd7764fe9f73 ("KVM: x86: latch INITs while in system management mode") changed code to latch INIT while vCPU is in SMM and process latched INIT when leaving SMM. It left a subtle remark in commit message that similar treatment should also be done while vCPU is in VMX non-root-mode. However, INIT signals should actually be latched in various vCPU states: (*) For both Intel and AMD, INIT signals should be latched while vCPU is in SMM. (*) For Intel, INIT should also be latched while vCPU is in VMX operation and later processed when vCPU leaves VMX operation by executing VMXOFF. (*) For AMD, INIT should also be latched while vCPU runs with GIF=0 or in guest-mode with intercept defined on INIT signal. To fix this: 1) Add kvm_x86_ops->apic_init_signal_blocked() such that each CPU vendor can define the various CPU states in which INIT signals should be blocked and modify kvm_apic_accept_events() to use it. 2) Modify vmx_check_nested_events() to check for pending INIT signal while vCPU in guest-mode. If so, emualte vmexit on EXIT_REASON_INIT_SIGNAL. Note that nSVM should have similar behaviour but is currently left as a TODO comment to implement in the future because nSVM don't yet implement svm_check_nested_events(). Note: Currently KVM nVMX implementation don't support VMX wait-for-SIPI activity state as specified in MSR_IA32_VMX_MISC bits 6:8 exposed to guest (See nested_vmx_setup_ctls_msrs()). If and when support for this activity state will be implemented, kvm_check_nested_events() would need to avoid emulating vmexit on INIT signal in case activity-state is wait-for-SIPI. In addition, kvm_apic_accept_events() would need to be modified to avoid discarding SIPI in case VMX activity-state is wait-for-SIPI but instead delay SIPI processing to vmx_check_nested_events() that would clear pending APIC events and emulate vmexit on SIPI. Reviewed-by: Joao Martins <joao.m.martins@oracle.com> Co-developed-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Signed-off-by: Nikita Leshenko <nikita.leshchenko@oracle.com> Signed-off-by: Liran Alon <liran.alon@oracle.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-10KVM: x86: Add kvm_emulate_{rd,wr}msr() to consolidate VXM/SVM codeSean Christopherson1-0/+2
Move RDMSR and WRMSR emulation into common x86 code to consolidate nearly identical SVM and VMX code. Note, consolidating RDMSR introduces an extra indirect call, i.e. retpoline, due to reaching {svm,vmx}_get_msr() via kvm_x86_ops, but a guest kernel likely has bigger problems if increasing the latency of RDMSR VM-Exits by ~70 cycles has a measurable impact on overall VM performance. E.g. the only recurring RDMSR VM-Exits (after booting) on my system running Linux 5.2 in the guest are for MSR_IA32_TSC_ADJUST via arch_cpu_idle_enter(). No functional change intended. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-10KVM: x86: Refactor up kvm_{g,s}et_msr() to simplify callersSean Christopherson1-2/+2
Refactor the top-level MSR accessors to take/return the index and value directly instead of requiring the caller to dump them into a msr_data struct. No functional change intended. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-09-10KVM: x86: Disable posted interrupts for non-standard IRQs delivery modesAlexander Graf1-0/+7
We can easily route hardware interrupts directly into VM context when they target the "Fixed" or "LowPriority" delivery modes. However, on modes such as "SMI" or "Init", we need to go via KVM code to actually put the vCPU into a different mode of operation, so we can not post the interrupt Add code in the VMX and SVM PI logic to explicitly refuse to establish posted mappings for advanced IRQ deliver modes. This reflects the logic in __apic_accept_irq() which also only ever passes Fixed and LowPriority interrupts as posted interrupts into the guest. This fixes a bug I have with code which configures real hardware to inject virtual SMIs into my guest. Signed-off-by: Alexander Graf <graf@amazon.com> Reviewed-by: Liran Alon <liran.alon@oracle.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Wanpeng Li <wanpengli@tencent.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-22KVM: x86: Rename access permissions cache member in struct kvm_vcpu_archSean Christopherson1-1/+1
Rename "access" to "mmio_access" to match the other MMIO cache members and to make it more obvious that it's tracking the access permissions for the MMIO cache. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-22x86: kvm: svm: propagate errors from skip_emulated_instruction()Vitaly Kuznetsov1-1/+1
On AMD, kvm_x86_ops->skip_emulated_instruction(vcpu) can, in theory, fail: in !nrips case we call kvm_emulate_instruction(EMULTYPE_SKIP). Currently, we only do printk(KERN_DEBUG) when this happens and this is not ideal. Propagate the error up the stack. On VMX, skip_emulated_instruction() doesn't fail, we have two call sites calling it explicitly: handle_exception_nmi() and handle_task_switch(), we can just ignore the result. On SVM, we also have two explicit call sites: svm_queue_exception() and it seems we don't need to do anything there as we check if RIP was advanced or not. In task_switch_interception(), however, we are better off not proceeding to kvm_task_switch() in case skip_emulated_instruction() failed. Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-09Merge tag 'kvmarm-fixes-for-5.3' of ↵Paolo Bonzini1-15/+19
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.3 - A bunch of switch/case fall-through annotation, fixing one actual bug - Fix PMU reset bug - Add missing exception class debug strings
2019-08-05KVM: remove kvm_arch_has_vcpu_debugfs()Paolo Bonzini1-0/+2
There is no need for this function as all arches have to implement kvm_arch_create_vcpu_debugfs() no matter what. A #define symbol let us actually simplify the code. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-08-05KVM: Fix leak vCPU's VMCS value into other pCPUWanpeng Li1-0/+1
After commit d73eb57b80b (KVM: Boost vCPUs that are delivering interrupts), a five years old bug is exposed. Running ebizzy benchmark in three 80 vCPUs VMs on one 80 pCPUs Skylake server, a lot of rcu_sched stall warning splatting in the VMs after stress testing: INFO: rcu_sched detected stalls on CPUs/tasks: { 4 41 57 62 77} (detected by 15, t=60004 jiffies, g=899, c=898, q=15073) Call Trace: flush_tlb_mm_range+0x68/0x140 tlb_flush_mmu.part.75+0x37/0xe0 tlb_finish_mmu+0x55/0x60 zap_page_range+0x142/0x190 SyS_madvise+0x3cd/0x9c0 system_call_fastpath+0x1c/0x21 swait_active() sustains to be true before finish_swait() is called in kvm_vcpu_block(), voluntarily preempted vCPUs are taken into account by kvm_vcpu_on_spin() loop greatly increases the probability condition kvm_arch_vcpu_runnable(vcpu) is checked and can be true, when APICv is enabled the yield-candidate vCPU's VMCS RVI field leaks(by vmx_sync_pir_to_irr()) into spinning-on-a-taken-lock vCPU's current VMCS. This patch fixes it by checking conservatively a subset of events. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Marc Zyngier <Marc.Zyngier@arm.com> Cc: stable@vger.kernel.org Fixes: 98f4a1467 (KVM: add kvm_arch_vcpu_runnable() test to kvm_vcpu_on_spin() loop) Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-22KVM: X86: Dynamically allocate user_fpuWanpeng Li1-1/+1
After reverting commit 240c35a3783a (kvm: x86: Use task structs fpu field for user), struct kvm_vcpu is 19456 bytes on my server, PAGE_ALLOC_COSTLY_ORDER(3) is the order at which allocations are deemed costly to service. In serveless scenario, one host can service hundreds/thoudands firecracker/kata-container instances, howerver, new instance will fail to launch after memory is too fragmented to allocate kvm_vcpu struct on host, this was observed in some cloud provider product environments. This patch dynamically allocates user_fpu, kvm_vcpu is 15168 bytes now on my Skylake server. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-22Revert "kvm: x86: Use task structs fpu field for user"Paolo Bonzini1-3/+4
This reverts commit 240c35a3783ab9b3a0afaba0dde7291295680a6b ("kvm: x86: Use task structs fpu field for user", 2018-11-06). The commit is broken and causes QEMU's FPU state to be destroyed when KVM_RUN is preempted. Fixes: 240c35a3783a ("kvm: x86: Use task structs fpu field for user") Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-07-18x86/kvm: Don't call kvm_spurious_fault() from .fixupJosh Poimboeuf1-15/+19
After making a change to improve objtool's sibling call detection, it started showing the following warning: arch/x86/kvm/vmx/nested.o: warning: objtool: .fixup+0x15: sibling call from callable instruction with modified stack frame The problem is the ____kvm_handle_fault_on_reboot() macro. It does a fake call by pushing a fake RIP and doing a jump. That tricks the unwinder into printing the function which triggered the exception, rather than the .fixup code. Instead of the hack to make it look like the original function made the call, just change the macro so that the original function actually does make the call. This allows removal of the hack, and also makes objtool happy. I triggered a vmx instruction exception and verified that the stack trace is still sane: kernel BUG at arch/x86/kvm/x86.c:358! invalid opcode: 0000 [#1] SMP PTI CPU: 28 PID: 4096 Comm: qemu-kvm Not tainted 5.2.0+ #16 Hardware name: Lenovo THINKSYSTEM SD530 -[7X2106Z000]-/-[7X2106Z000]-, BIOS -[TEE113Z-1.00]- 07/17/2017 RIP: 0010:kvm_spurious_fault+0x5/0x10 Code: 00 00 00 00 00 8b 44 24 10 89 d2 45 89 c9 48 89 44 24 10 8b 44 24 08 48 89 44 24 08 e9 d4 40 22 00 0f 1f 40 00 0f 1f 44 00 00 <0f> 0b 66 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 41 55 49 89 fd 41 RSP: 0018:ffffbf91c683bd00 EFLAGS: 00010246 RAX: 000061f040000000 RBX: ffff9e159c77bba0 RCX: ffff9e15a5c87000 RDX: 0000000665c87000 RSI: ffff9e15a5c87000 RDI: ffff9e159c77bba0 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff9e15a5c87000 R10: 0000000000000000 R11: fffff8f2d99721c0 R12: ffff9e159c77bba0 R13: ffffbf91c671d960 R14: ffff9e159c778000 R15: 0000000000000000 FS: 00007fa341cbe700(0000) GS:ffff9e15b7400000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007fdd38356804 CR3: 00000006759de003 CR4: 00000000007606e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: loaded_vmcs_init+0x4f/0xe0 alloc_loaded_vmcs+0x38/0xd0 vmx_create_vcpu+0xf7/0x600 kvm_vm_ioctl+0x5e9/0x980 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? __switch_to_asm+0x40/0x70 ? __switch_to_asm+0x34/0x70 ? free_one_page+0x13f/0x4e0 do_vfs_ioctl+0xa4/0x630 ksys_ioctl+0x60/0x90 __x64_sys_ioctl+0x16/0x20 do_syscall_64+0x55/0x1c0 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fa349b1ee5b Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org> Link: https://lkml.kernel.org/r/64a9b64d127e87b6920a97afde8e96ea76f6524e.1563413318.git.jpoimboe@redhat.com
2019-07-11Merge tag 'kvm-arm-for-5.3' of ↵Paolo Bonzini1-4/+1
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm updates for 5.3 - Add support for chained PMU counters in guests - Improve SError handling - Handle Neoverse N1 erratum #1349291 - Allow side-channel mitigation status to be migrated - Standardise most AArch64 system register accesses to msr_s/mrs_s - Fix host MPIDR corruption on 32bit
2019-07-11KVM: x86: PMU Event FilterEric Hankland1-0/+2
Some events can provide a guest with information about other guests or the host (e.g. L3 cache stats); providing the capability to restrict access to a "safe" set of events would limit the potential for the PMU to be used in any side channel attacks. This change introduces a new VM ioctl that sets an event filter. If the guest attempts to program a counter for any blacklisted or non-whitelisted event, the kernel counter won't be created, so any RDPMC/RDMSR will show 0 instances of that event. Signed-off-by: Eric Hankland <ehankland@google.com> [Lots of changes. All remaining bugs are probably mine. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-19treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 499Thomas Gleixner1-4/+1
Based on 1 normalized pattern(s): this work is licensed under the terms of the gnu gpl version 2 see the copying file in the top level directory extracted by the scancode license scanner the SPDX license identifier GPL-2.0-only has been chosen to replace the boilerplate/reference in 35 file(s). Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Kate Stewart <kstewart@linuxfoundation.org> Reviewed-by: Enrico Weigelt <info@metux.net> Reviewed-by: Allison Randal <allison@lohutok.net> Cc: linux-spdx@vger.kernel.org Link: https://lkml.kernel.org/r/20190604081206.797835076@linutronix.de Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2019-06-18KVM: VMX: Handle NMIs, #MCs and async #PFs in common irqs-disabled fnSean Christopherson1-1/+1
Per commit 1b6269db3f833 ("KVM: VMX: Handle NMIs before enabling interrupts and preemption"), NMIs are handled directly in vmx_vcpu_run() to "make sure we handle NMI on the current cpu, and that we don't service maskable interrupts before non-maskable ones". The other exceptions handled by complete_atomic_exit(), e.g. async #PF and #MC, have similar requirements, and are located there to avoid extra VMREADs since VMX bins hardware exceptions and NMIs into a single exit reason. Clean up the code and eliminate the vaguely named complete_atomic_exit() by moving the interrupts-disabled exception and NMI handling into the existing handle_external_intrs() callback, and rename the callback to a more appropriate name. Rename VMexit handlers throughout so that the atomic and non-atomic counterparts have similar names. In addition to improving code readability, this also ensures the NMI handler is run with the host's debug registers loaded in the unlikely event that the user is debugging NMIs. Accuracy of the last_guest_tsc field is also improved when handling NMIs (and #MCs) as the handler will run after updating said field. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> [Naming cleanups. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-18KVM: x86: move MSR_IA32_POWER_CTL handling to common codePaolo Bonzini1-0/+1
Make it available to AMD hosts as well, just in case someone is trying to use an Intel processor's CPUID setup. Suggested-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-18kvm: x86: add host poll control msrsMarcelo Tosatti1-0/+2
Add an MSRs which allows the guest to disable host polling (specifically the cpuidle-haltpoll, when performing polling in the guest, disables host side polling). Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-04KVM: X86: Provide a capability to disable cstate msr read interceptsWanpeng Li1-0/+1
Allow guest reads CORE cstate when exposing host CPU power management capabilities to the guest. PKG cstate is restricted to avoid a guest to get the whole package information in multi-tenant scenario. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by: Wanpeng Li <wanpengli@tencent.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-04kvm: x86: refine kvm_get_arch_capabilities()Xiaoyao Li1-1/+0
1. Using X86_FEATURE_ARCH_CAPABILITIES to enumerate the existence of MSR_IA32_ARCH_CAPABILITIES to avoid using rdmsrl_safe(). 2. Since kvm_get_arch_capabilities() is only used in this file, making it static. Signed-off-by: Xiaoyao Li <xiaoyao.li@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-06-04KVM: Directly return result from kvm_arch_check_processor_compat()Sean Christopherson1-1/+1
Add a wrapper to invoke kvm_arch_check_processor_compat() so that the boilerplate ugliness of checking virtualization support on all CPUs is hidden from the arch specific code. x86's implementation in particular is quite heinous, as it unnecessarily propagates the out-param pattern into kvm_x86_ops. While the x86 specific issue could be resolved solely by changing kvm_x86_ops, make the change for all architectures as returning a value directly is prettier and technically more robust, e.g. s390 doesn't set the out param, which could lead to subtle breakage in the (highly unlikely) scenario where the out-param was not pre-initialized by the caller. Opportunistically annotate svm_check_processor_compat() with __init. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-05-17Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-1/+6
Pull KVM updates from Paolo Bonzini: "ARM: - support for SVE and Pointer Authentication in guests - PMU improvements POWER: - support for direct access to the POWER9 XIVE interrupt controller - memory and performance optimizations x86: - support for accessing memory not backed by struct page - fixes and refactoring Generic: - dirty page tracking improvements" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (155 commits) kvm: fix compilation on aarch64 Revert "KVM: nVMX: Expose RDPMC-exiting only when guest supports PMU" kvm: x86: Fix L1TF mitigation for shadow MMU KVM: nVMX: Disable intercept for FS/GS base MSRs in vmcs02 when possible KVM: PPC: Book3S: Remove useless checks in 'release' method of KVM device KVM: PPC: Book3S HV: XIVE: Fix spelling mistake "acessing" -> "accessing" KVM: PPC: Book3S HV: Make sure to load LPID for radix VCPUs kvm: nVMX: Set nested_run_pending in vmx_set_nested_state after checks complete tests: kvm: Add tests for KVM_SET_NESTED_STATE KVM: nVMX: KVM_SET_NESTED_STATE - Tear down old EVMCS state before setting new state tests: kvm: Add tests for KVM_CAP_MAX_VCPUS and KVM_CAP_MAX_CPU_ID tests: kvm: Add tests to .gitignore KVM: Introduce KVM_CAP_MANUAL_DIRTY_LOG_PROTECT2 KVM: Fix kvm_clear_dirty_log_protect off-by-(minus-)one KVM: Fix the bitmap range to copy during clear dirty KVM: arm64: Fix ptrauth ID register masking logic KVM: x86: use direct accessors for RIP and RSP KVM: VMX: Use accessors for GPRs outside of dedicated caching logic KVM: x86: Omit caching logic for always-available GPRs kvm, x86: Properly check whether a pfn is an MMIO or not ...
2019-04-30x86/kvm: Implement HWCR supportBorislav Petkov1-0/+3
The hardware configuration register has some useful bits which can be used by guests. Implement McStatusWrEn which can be used by guests when injecting MCEs with the in-kernel mce-inject module. For that, we need to set bit 18 - McStatusWrEn - first, before writing the MCi_STATUS registers (otherwise we #GP). Add the required machinery to do so. Signed-off-by: Borislav Petkov <bp@suse.de> Cc: Jim Mattson <jmattson@google.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: KVM <kvm@vger.kernel.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Sean Christopherson <sean.j.christopherson@intel.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Tony Luck <tony.luck@intel.com> Cc: Yazen Ghannam <Yazen.Ghannam@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-30KVM: lapic: Refactor ->set_hv_timer to use an explicit expired paramSean Christopherson1-1/+2
Refactor kvm_x86_ops->set_hv_timer to use an explicit parameter for stating that the timer has expired. Overloading the return value is unnecessarily clever, e.g. can lead to confusion over the proper return value from start_hv_timer() when r==1. Cc: Wanpeng Li <wanpengli@tencent.com> Cc: Liran Alon <liran.alon@oracle.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-30KVM: x86: Add support of clear Trace_ToPA_PMI statusLuwei Kang1-0/+1
Let guests clear the Intel PT ToPA PMI status (bit 55 of MSR_CORE_PERF_GLOBAL_OVF_CTRL). Signed-off-by: Luwei Kang <luwei.kang@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-30x86/kvm/mmu: reset MMU context when 32-bit guest switches PAEVitaly Kuznetsov1-0/+1
Commit 47c42e6b4192 ("KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'") introduced a regression: 32-bit PAE guests stopped working. The issue appears to be: when guest switches (enables) PAE we need to re-initialize MMU context (set context->root_level, do reset_rsvds_bits_mask(), ...) but init_kvm_tdp_mmu() doesn't do that because we threw away is_pae(vcpu) flag from mmu role. Restore it to kvm_mmu_extended_role (as we now don't need it in base role) to fix the issue. Fixes: 47c42e6b4192 ("KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'") Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16KVM: x86: Load SMRAM in a single shot when leaving SMMSean Christopherson1-1/+4
RSM emulation is currently broken on VMX when the interrupted guest has CR4.VMXE=1. Rather than dance around the issue of HF_SMM_MASK being set when loading SMSTATE into architectural state, ideally RSM emulation itself would be reworked to clear HF_SMM_MASK prior to loading non-SMM architectural state. Ostensibly, the only motivation for having HF_SMM_MASK set throughout the loading of state from the SMRAM save state area is so that the memory accesses from GET_SMSTATE() are tagged with role.smm. Load all of the SMRAM save state area from guest memory at the beginning of RSM emulation, and load state from the buffer instead of reading guest memory one-by-one. This paves the way for clearing HF_SMM_MASK prior to loading state, and also aligns RSM with the enter_smm() behavior, which fills a buffer and writes SMRAM save state in a single go. Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-04-16kvm: mmu: Fix overflow on kvm mmu page limit calculationBen Gardon1-6/+6
KVM bases its memory usage limits on the total number of guest pages across all memslots. However, those limits, and the calculations to produce them, use 32 bit unsigned integers. This can result in overflow if a VM has more guest pages that can be represented by a u32. As a result of this overflow, KVM can use a low limit on the number of MMU pages it will allocate. This makes KVM unable to map all of guest memory at once, prompting spurious faults. Tested: Ran all kvm-unit-tests on an Intel Haswell machine. This patch introduced no new failures. Signed-off-by: Ben Gardon <bgardon@google.com> Cc: stable@vger.kernel.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28KVM: x86: update %rip after emulating IOSean Christopherson1-0/+1
Most (all?) x86 platforms provide a port IO based reset mechanism, e.g. OUT 92h or CF9h. Userspace may emulate said mechanism, i.e. reset a vCPU in response to KVM_EXIT_IO, without explicitly announcing to KVM that it is doing a reset, e.g. Qemu jams vCPU state and resumes running. To avoid corruping %rip after such a reset, commit 0967b7bf1c22 ("KVM: Skip pio instruction when it is emulated, not executed") changed the behavior of PIO handlers, i.e. today's "fast" PIO handling to skip the instruction prior to exiting to userspace. Full emulation doesn't need such tricks becase re-emulating the instruction will naturally handle %rip being changed to point at the reset vector. Updating %rip prior to executing to userspace has several drawbacks: - Userspace sees the wrong %rip on the exit, e.g. if PIO emulation fails it will likely yell about the wrong address. - Single step exits to userspace for are effectively dropped as KVM_EXIT_DEBUG is overwritten with KVM_EXIT_IO. - Behavior of PIO emulation is different depending on whether it goes down the fast path or the slow path. Rather than skip the PIO instruction before exiting to userspace, snapshot the linear %rip and cancel PIO completion if the current value does not match the snapshot. For a 64-bit vCPU, i.e. the most common scenario, the snapshot and comparison has negligible overhead as VMCS.GUEST_RIP will be cached regardless, i.e. there is no extra VMREAD in this case. All other alternatives to snapshotting the linear %rip that don't rely on an explicit reset announcenment suffer from one corner case or another. For example, canceling PIO completion on any write to %rip fails if userspace does a save/restore of %rip, and attempting to avoid that issue by canceling PIO only if %rip changed then fails if PIO collides with the reset %rip. Attempting to zero in on the exact reset vector won't work for APs, which means adding more hooks such as the vCPU's MP_STATE, and so on and so forth. Checking for a linear %rip match technically suffers from corner cases, e.g. userspace could theoretically rewrite the underlying code page and expect a different instruction to execute, or the guest hardcodes a PIO reset at 0xfffffff0, but those are far, far outside of what can be considered normal operation. Fixes: 432baf60eee3 ("KVM: VMX: use kvm_fast_pio_in for handling IN I/O") Cc: <stable@vger.kernel.org> Reported-by: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28KVM: x86: Emulate MSR_IA32_ARCH_CAPABILITIES on AMD hostsSean Christopherson1-0/+1
The CPUID flag ARCH_CAPABILITIES is unconditioinally exposed to host userspace for all x86 hosts, i.e. KVM advertises ARCH_CAPABILITIES regardless of hardware support under the pretense that KVM fully emulates MSR_IA32_ARCH_CAPABILITIES. Unfortunately, only VMX hosts handle accesses to MSR_IA32_ARCH_CAPABILITIES (despite KVM_GET_MSRS also reporting MSR_IA32_ARCH_CAPABILITIES for all hosts). Move the MSR_IA32_ARCH_CAPABILITIES handling to common x86 code so that it's emulated on AMD hosts. Fixes: 1eaafe91a0df4 ("kvm: x86: IA32_ARCH_CAPABILITIES is always supported") Cc: stable@vger.kernel.org Reported-by: Xiaoyao Li <xiaoyao.li@linux.intel.com> Cc: Jim Mattson <jmattson@google.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28KVM: x86: remove check on nr_mmu_pages in kvm_arch_commit_memory_region()Wei Yang1-1/+1
* nr_mmu_pages would be non-zero only if kvm->arch.n_requested_mmu_pages is non-zero. * nr_mmu_pages is always non-zero, since kvm_mmu_calculate_mmu_pages() never return zero. Based on these two reasons, we can merge the two *if* clause and use the return value from kvm_mmu_calculate_mmu_pages() directly. This simplify the code and also eliminate the possibility for reader to believe nr_mmu_pages would be zero. Signed-off-by: Wei Yang <richard.weiyang@gmail.com> Reviewed-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28KVM: SVM: Workaround errata#1096 (insn_len maybe zero on SMAP violation)Singh, Brijesh1-0/+2
Errata#1096: On a nested data page fault when CR.SMAP=1 and the guest data read generates a SMAP violation, GuestInstrBytes field of the VMCB on a VMEXIT will incorrectly return 0h instead the correct guest instruction bytes . Recommend Workaround: To determine what instruction the guest was executing the hypervisor will have to decode the instruction at the instruction pointer. The recommended workaround can not be implemented for the SEV guest because guest memory is encrypted with the guest specific key, and instruction decoder will not be able to decode the instruction bytes. If we hit this errata in the SEV guest then log the message and request a guest shutdown. Reported-by: Venkatesh Srinivas <venkateshs@google.com> Cc: Jim Mattson <jmattson@google.com> Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Radim Krčmář" <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Brijesh Singh <brijesh.singh@amd.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2019-03-28KVM: x86: fix handling of role.cr4_pae and rename it to 'gpte_size'Sean Christopherson1-2/+2
The cr4_pae flag is a bit of a misnomer, its purpose is really to track whether the guest PTE that is being shadowed is a 4-byte entry or an 8-byte entry. Prior to supporting nested EPT, the size of the gpte was reflected purely by CR4.PAE. KVM fudged things a bit for direct sptes, but it was mostly harmless since the size of the gpte never mattered. Now that a spte may be tracking an indirect EPT entry, relying on CR4.PAE is wrong and ill-named. For direct shadow pages, force the gpte_size to '1' as they are always 8-byte entries; EPT entries can only be 8-bytes and KVM always uses 8-byte entries for NPT and its identity map (when running with EPT but not unrestricted guest). Likewise, nested EPT entries are always 8-bytes. Nested EPT presents a unique scenario as the size of the entries are not dictated by CR4.PAE, but neither is the shadow page a direct map. To handle this scenario, set cr0_wp=1 and smap_andnot_wp=1, an otherwise impossible combination, to denote a nested EPT shadow page. Use the information to avoid incorrectly zapping an unsync'd indirect page in __kvm_sync_page(). Providing a consistent and accurate gpte_size fixes a bug reported by Vitaly where fast_cr3_switch() always fails when switching from L2 to L1 as kvm_mmu_get_page() would force role.cr4_pae=0 for direct pages, whereas kvm_calc_mmu_role_common() would set it according to CR4.PAE. Fixes: 7dcd575520082 ("x86/kvm/mmu: check if tdp/shadow MMU reconfiguration is needed") Reported-by: Vitaly Kuznetsov <vkuznets@redhat.com> Tested-by: Vitaly Kuznetsov <vkuznets@redhat.com> Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-21 20:33:33 +0300