summaryrefslogtreecommitdiff
path: root/arch/sh
AgeCommit message (Collapse)AuthorFilesLines
2009-01-03Merge branch 'cpus4096-for-linus-3' of ↵Linus Torvalds1-0/+1
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-3' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (77 commits) x86: setup_per_cpu_areas() cleanup cpumask: fix compile error when CONFIG_NR_CPUS is not defined cpumask: use alloc_cpumask_var_node where appropriate cpumask: convert shared_cpu_map in acpi_processor* structs to cpumask_var_t x86: use cpumask_var_t in acpi/boot.c x86: cleanup some remaining usages of NR_CPUS where s/b nr_cpu_ids sched: put back some stack hog changes that were undone in kernel/sched.c x86: enable cpus display of kernel_max and offlined cpus ia64: cpumask fix for is_affinity_mask_valid() cpumask: convert RCU implementations, fix xtensa: define __fls mn10300: define __fls m32r: define __fls h8300: define __fls frv: define __fls cris: define __fls cpumask: CONFIG_DISABLE_OBSOLETE_CPUMASK_FUNCTIONS cpumask: zero extra bits in alloc_cpumask_var_node cpumask: replace for_each_cpu_mask_nr with for_each_cpu in kernel/time/ cpumask: convert mm/ ...
2009-01-03Merge branch 'master' of ↵Mike Travis160-4916/+8695
git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask into merge-rr-cpumask Conflicts: arch/x86/kernel/io_apic.c kernel/rcuclassic.c kernel/sched.c kernel/time/tick-sched.c Signed-off-by: Mike Travis <travis@sgi.com> [ mingo@elte.hu: backmerged typo fix for io_apic.c ] Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-01-02Merge branch 'cpus4096-for-linus-2' of ↵Linus Torvalds5-12/+5
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'cpus4096-for-linus-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (66 commits) x86: export vector_used_by_percpu_irq x86: use logical apicid in x2apic_cluster's x2apic_cpu_mask_to_apicid_and() sched: nominate preferred wakeup cpu, fix x86: fix lguest used_vectors breakage, -v2 x86: fix warning in arch/x86/kernel/io_apic.c sched: fix warning in kernel/sched.c sched: move test_sd_parent() to an SMP section of sched.h sched: add SD_BALANCE_NEWIDLE at MC and CPU level for sched_mc>0 sched: activate active load balancing in new idle cpus sched: bias task wakeups to preferred semi-idle packages sched: nominate preferred wakeup cpu sched: favour lower logical cpu number for sched_mc balance sched: framework for sched_mc/smt_power_savings=N sched: convert BALANCE_FOR_xx_POWER to inline functions x86: use possible_cpus=NUM to extend the possible cpus allowed x86: fix cpu_mask_to_apicid_and to include cpu_online_mask x86: update io_apic.c to the new cpumask code x86: Introduce topology_core_cpumask()/topology_thread_cpumask() x86: xen: use smp_call_function_many() x86: use work_on_cpu in x86/kernel/cpu/mcheck/mce_amd_64.c ... Fixed up trivial conflict in kernel/time/tick-sched.c manually
2009-01-01take init_fs to saner placeAl Viro1-1/+0
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-12-30Merge branch 'master' of ↵Rusty Russell159-4914/+8694
git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6
2008-12-28Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds2-3/+2
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: (85 commits) [S390] provide documentation for hvc_iucv kernel parameter. [S390] convert ctcm printks to dev_xxx and pr_xxx macros. [S390] convert zfcp printks to pr_xxx macros. [S390] convert vmlogrdr printks to pr_xxx macros. [S390] convert zfcp dumper printks to pr_xxx macros. [S390] convert cpu related printks to pr_xxx macros. [S390] convert qeth printks to dev_xxx and pr_xxx macros. [S390] convert sclp printks to pr_xxx macros. [S390] convert iucv printks to dev_xxx and pr_xxx macros. [S390] convert ap_bus printks to pr_xxx macros. [S390] convert dcssblk and extmem printks messages to pr_xxx macros. [S390] convert monwriter printks to pr_xxx macros. [S390] convert s390 debug feature printks to pr_xxx macros. [S390] convert monreader printks to pr_xxx macros. [S390] convert appldata printks to pr_xxx macros. [S390] convert setup printks to pr_xxx macros. [S390] convert hypfs printks to pr_xxx macros. [S390] convert time printks to pr_xxx macros. [S390] convert cpacf printks to pr_xxx macros. [S390] convert cio printks to pr_xxx macros. ...
2008-12-26cpumask: sh: Introduce cpumask_of_{node,pcibus} to replace ↵Rusty Russell1-0/+1
{node,pcibus}_to_cpumask Impact: New APIs The old node_to_cpumask/node_to_pcibus returned a cpumask_t: these return a pointer to a struct cpumask. Part of removing cpumasks from the stack. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Cc: Paul Mundt <lethal@linux-sh.org>
2008-12-25[S390] arch_setup_additional_pages argumentsMartin Schwidefsky2-3/+2
arch_setup_additional_pages currently gets two arguments, the binary format descripton and an indication if the process uses an executable stack or not. The second argument is not used by anybody, it could be removed without replacement. What actually does make sense is to pass an indication if the process uses the elf interpreter or not. The glibc code will not use anything from the vdso if the process does not use the dynamic linker, so for statically linked binaries the architecture backend can choose not to map the vdso. Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-12-22sh: oprofile: Fix up the module build.Paul Mundt1-5/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add UIO support for JPU on SH7722.Takanari Hayama1-0/+31
Add JPU support on Migo-R via UIO. This make use of Magnus's generic UIO platform driver. Chunk of contiguous memory to hold intermediate image and compressed data during encode and decode. Signed-off-by: Takanari Hayama <taki@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-rsk: Use uImage generation by default for rsk7201/7203.Paul Mundt1-1/+1
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-sh03: Fix up pata_platform build breakage.Paul Mundt1-9/+20
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: enable deferred io LCDC on Migo-RMagnus Damm1-0/+2
Enable LCDC deferred io on Migo-R using 1s delay. As with other deferred io frame buffers user space code should use fsync() on the frame buffer device to trigger an update. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: add LCDC interrupt configuration to AP325 and Migo-RMagnus Damm2-0/+8
Add LCDC interrupt resources for AP325 and Migo-R. The LCDC driver does not require interrupts at this point, but changes such as one-shot SYS mode using deferred io, and wait-for-vblank will both need this. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: split coherent pagesMagnus Damm1-1/+6
Split pages returned by dma_alloc_coherent() and make sure we free them one by one. Signed-off-by: Magnus Damm <damm@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: dma: Kill off ISA DMA wrapper.Paul Mundt3-110/+0
There are no more users for this code, and it has been deprecated for some time, so just kill it off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Conditionalize the code dumper on CONFIG_DUMP_CODE.Paul Mundt3-1/+22
We don't really want this enabled by default, but it is still quite useful for debugging. So, make it conditional and leave it off by default. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off the unused SH_ALPHANUMERIC debug option.Paul Mundt1-8/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Enable skipping of bss on debug platforms for sh32 also.Paul Mundt2-5/+22
This enables the same functionality that sh64 has for sh32. When running on simulated hardware or via remote memory via the debug interface, memory is gauranteed to be zero on boot already, and skipping the zeroing of BSS has measurable boot time benefits. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22doc: Update sh cpufreq documentation.Paul Mundt1-2/+6
The sh cpufreq driver is no longer limited to just the SH-3 and SH-4, update the documentation to reflect this fact accordingly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mrshpc_setup_windows() needs to be inline.Paul Mundt1-1/+1
While no one should be including this file multiple times, flag it inline anyways just in case. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off cf-enabler with extreme prejudice.Paul Mundt8-220/+63
Now that the rest of the boards that were using cf-enabler "generically" have switched to setting up their mappings on their own, only the mach-se boards were left using it. All of the cf-enabler using mach-se boards use a special initialization of the MRSHPC windows rather than going through the special PTE as other SH-4 platforms do. This consolidates the MRSHPC setup logic, hooks it up on the boards that care, and gets rid of any and all remaining references to cf-enabler. This has been long overdue, as cf-enabler has been the bane of arch/sh/kernel for the last 7 years. Good riddance. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add a simple edosk7705_defconfig for build testing.Paul Mundt1-0/+438
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-edosk7705: Fix up edosk7705 so it all builds again.Paul Mundt5-80/+24
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-microdev: Split out the fdc37c93xapm initialization code.Paul Mundt3-181/+167
This makes the microdev code a bit more readable, and moves the setup for the SuperIO out on its own. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-sh03: Use __set_io_port_base(), kill off special ioport_map().Paul Mundt2-10/+2
This also fixes up a long-standing bug for this platform where the PIO base was set to a register offset, rather than the actual PIO offset itself. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: mach-sh03: Move off of cf_enabler to pata_platform, as per landisk.Paul Mundt2-6/+35
This gets rid of the cf enabler use on mach-sh03 and switches to use pata_platform with the proper address directly. cf_enabler is subsequently disabled for mach-sh03. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: board-shmin: Convert shmin to use __set_io_port_base().Paul Mundt1-11/+3
Drop the special mv_ioport_map() implementation, as this can simply use __set_io_port_base() directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off dead mv_init_pci() from machvec.Paul Mundt1-1/+0
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Simplify kernel_thread_helper() for sh32.Paul Mundt1-15/+4
This can use the same implementation as sh64, the generated assembly is the same between the new and old version, so there is not much point in leaving it open coded in inline assembly. This is preparatory work for future consolidation of the _32/_64 variants. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off mv_heartbeat() from the machvec.Paul Mundt3-12/+0
Nothing is using this any more, so get rid of it before anyone gets the bright idea to start using it again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off the cayman and microdev special heartbeat code.Paul Mundt5-166/+0
These can use the generic code instead. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off sh_bios_in_gdb_mode().Paul Mundt2-18/+0
With the reworked kgdb support, we always detach and reinitialize the stub. This was mostly a feature for handoffs between sh-ipl+g and the kgdb stub, but virtually no sh-ipl+g versions ever had this working right in the first place. Given that the sh-ipl+g stubs in general use today don't even support the GDB stub, and we have already killed off the special casing in the sh-sci serial driver, kill off this now unused symbol too. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: export sh_bios_get_node_addr() symbol for stnic module.Paul Mundt1-2/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Run sh_bios through a long overdue Lindent.Paul Mundt1-36/+34
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: oprofile: Convert op_model_sh7750 to new common interface.Paul Mundt1-94/+78
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: oprofile: Backtrace support.Dave Peverley2-0/+127
This patch improves the oprofile support on sh and adds backtrace support. Signed-off-by: Dave Peverley <dpeverley@mpc-data.co.uk> Signed-off-by: Chris Smith <chris.smith@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: oprofile: Refactor common setup code for multiple driver support.Paul Mundt4-30/+178
This re-implements the old op_model_null code in to something more generic, where multiple drivers, backtrace, etc. can all be interfaced. Based largely on arch/mips/oprofile/common.c. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Enable GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH machinesMatt Fleming1-2/+0
After the recent changes to switch SuperH board support over to irq_chip it is now possible to set GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH boards. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Cayman boards from hw_interrupt_type to irq_chipMatt Fleming1-27/+8
I've been unable to even compile-test this change because I don't have an sh5 toolchain. All uses of hw_interrupt_type for SuperH boards have now been converted to use irq_chip. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Dreamcast support from hw_interrupt_type to irq_chipMatt Fleming2-106/+91
Switch the dreamcast IRQ code over to the irq_chip way of doing things, so that we can set GENERIC_HARDIRQS_NO__DO_IRQ for all SuperH boards. Also, whilst I'm here change some things to make checkpatch.pl happy: - Indent with tabs, not with spaces - Include <linux/io.h>, not <asm/io.h> - Fix the multi-line comment style - Fix some typos in the comments Tested-by: Adrian McMenamin <adrian@newgolddream.dyndns.info> Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert SystemH board support from hw_interrupt_type to irq_chipMatt Fleming1-31/+6
... as part of the hw_interrupt_type to irq_chip crusade. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Convert Microdev boards from hw_interrupt_type to irq_chipMatt Fleming1-29/+7
This is part of the SH move to irq_chip. Signed-off-by: Matt Fleming <mjf@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Provide sdivsi3/udivsi3/udivdi3 for sh64, kill off libgcc linking.Paul Mundt6-5/+314
This moves in the necessary libgcc bits and kills off the libgcc linking for sh64 kernels as well. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Add SH-5 optimized memcpy()/memset()/strcpy()/strlen().Paul Mundt8-94/+440
Adopted from the uClibc optimized string versions. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Kill off remaining CONFIG_SH_KGDB bits.Paul Mundt1-1/+0
Now that we use the generic stub, kill off all of the left over references. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Generic kgdb stub support.Paul Mundt15-1244/+328
This migrates from the old bitrotted kgdb stub implementation and moves to the generic stub. In the process support for SH-2/SH-2A is also added, which the old stub never provided. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Enable HAVE_ARCH_TRACEHOOK for all SH, now that SH-5 supports it too.Paul Mundt3-4/+4
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Provide linux/regset.h interface for SH-5.Paul Mundt3-4/+186
Plugs in general and FPU regsets. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2008-12-22sh: Provide asm/syscall.h for SH-5.Paul Mundt3-32/+108
This provides the asm/syscall.h implementation for sh64 parts. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-17 22:51:31 +0300