summaryrefslogtreecommitdiff
path: root/arch/sh/mm
AgeCommit message (Collapse)AuthorFilesLines
2009-10-10sh: Get rid of the kmem cache codeMatt Fleming1-55/+26
Unfortunately, at the time during in boot when we want to be setting up the PMB entries, the kmem subsystem hasn't been initialised. We now match pmb_map slots with pmb_entry_list slots. When we find an empty slot in pmb_map, we set the bit, thereby acquiring the corresponding pmb_entry_list entry. There is a benefit in using this static array of struct pmb_entry's; we don't need to acquire any locks in order to traverse the list of struct pmb_entry's. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Make most PMB functions staticMatt Fleming1-9/+8
There's no need to export the internal PMB functions for allocating, freeing and modifying PMB entries, etc. This way we can restrict the interface for PMB. Also remove the static from pmb_init() so that we have more freedom in setting up the initial PMB entries and turning on MMU 32bit mode. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: CONFIG_PMB doesn't mean the MMU is in 32bit modeMatt Fleming1-2/+0
CONFIG_PMB will eventually allow the MMU to be switched between 29-bit and 32-bit mode dynamically at runtime. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Prepare for dynamic PMB supportMatt Fleming2-3/+11
To allow the MMU to be switched between 29bit and 32bit mode at runtime some constants need to swapped for functions that return a runtime value. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Obliterate the P1 area macrosMatt Fleming2-2/+2
Replace the use of PHYSADDR() with __pa(). PHYSADDR() is based on the idea that all addresses in P1SEG are untranslated, so we can access an address's physical page as an offset from P1SEG. This doesn't work for CONFIG_PMB/CONFIG_PMB_FIXED because pages in P1SEG and P2SEG are used for PMB mappings and so can be translated to any physical address. Likewise, replace a P1SEGADDR() use with virt_to_phys(). Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10sh: Allocate PMB entry slot earlierMatt Fleming1-41/+39
Simplify set_pmb_entry() by removing the possibility of not finding a free slot in the PMB. Instead we now allocate a slot in pmb_alloc() so that if there are no free slots we fail at allocation time, rather than in set_pmb_entry(). Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-10Merge branch 'sh/cachetlb'Paul Mundt3-422/+84
2009-10-09sh: Don't allocate smaller sized mappings on every iterationMatt Fleming1-0/+7
Currently, we've got the less than ideal situation where if we need to allocate a 256MB mapping we'll allocate four entries like so, entry 1: 128MB entry 2: 64MB entry 3: 16MB entry 4: 16MB This is because as we execute the loop in pmb_remap() we will progressively try mapping the remaining address space with smaller and smaller sizes. This isn't good because the size we use on one iteration may be the perfect size to use on the next iteration, for instance when the initial size is divisible by one of the PMB mapping sizes. With this patch, we now only need two entries in the PMB to map 256MB of address space, entry 1: 128MB entry 2: 128MB Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09sh: Try PMB mapping based on physical address, not mapping sizeMatt Fleming1-1/+1
We should favour PMB mappings when the physical address cannot be reached with 29-bits. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09sh: Plug PMB alloc memory leakMatt Fleming1-6/+24
If we fail to allocate a PMB entry in pmb_remap() we must remember to clear and free any PMB entries that we may have previously allocated, e.g. if we were allocating a multiple entry mapping. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-10-09sh: Sprinkle __uses_jump_to_uncachedMatt Fleming2-3/+3
Fix some callers of jump_to_uncached() and back_to_cached() that were not annotated with __uses_jump_to_uncached. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-23kcore: use registerd physmem informationKAMEZAWA Hiroyuki1-4/+0
For /proc/kcore, each arch registers its memory range by kclist_add(). In usual, - range of physical memory - range of vmalloc area - text, etc... are registered but "range of physical memory" has some troubles. It doesn't updated at memory hotplug and it tend to include unnecessary memory holes. Now, /proc/iomem (kernel/resource.c) includes required physical memory range information and it's properly updated at memory hotplug. Then, it's good to avoid using its own code(duplicating information) and to rebuild kclist for physical memory based on /proc/iomem. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23kcore: register vmalloc area in generic wayKAMEZAWA Hiroyuki1-3/+1
For /proc/kcore, vmalloc areas are registered per arch. But, all of them registers same range of [VMALLOC_START...VMALLOC_END) This patch unifies them. By this. archs which have no kclist_add() hooks can see vmalloc area correctly. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-23kcore: add kclist typesKAMEZAWA Hiroyuki1-2/+2
Presently, kclist_add() only eats start address and size as its arguments. Considering to make kclist dynamically reconfigulable, it's necessary to know which kclists are for System RAM and which are not. This patch add kclist types as KCORE_RAM KCORE_VMALLOC KCORE_TEXT KCORE_OTHER This "type" is used in a patch following this for detecting KCORE_RAM. Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: WANG Cong <xiyou.wangcong@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-22arches: drop superfluous casts in nr_free_pages() callersGeert Uytterhoeven1-1/+1
Commit 96177299416dbccb73b54e6b344260154a445375 ("Drop free_pages()") modified nr_free_pages() to return 'unsigned long' instead of 'unsigned int'. This made the casts to 'unsigned long' in most callers superfluous, so remove them. [akpm@linux-foundation.org: coding-style fixes] Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com> Reviewed-by: Christoph Lameter <cl@linux-foundation.org> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Russell King <rmk+kernel@arm.linux.org.uk> Acked-by: David S. Miller <davem@davemloft.net> Acked-by: Kyle McMartin <kyle@mcmartin.ca> Acked-by: WANG Cong <xiyou.wangcong@gmail.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Mikael Starvik <starvik@axis.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: David Howells <dhowells@redhat.com> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: Chris Zankel <zankel@tensilica.com> Cc: Michal Simek <monstr@monstr.eu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-21perf: Do the big rename: Performance Counters -> Performance EventsIngo Molnar2-8/+8
Bye-bye Performance Counters, welcome Performance Events! In the past few months the perfcounters subsystem has grown out its initial role of counting hardware events, and has become (and is becoming) a much broader generic event enumeration, reporting, logging, monitoring, analysis facility. Naming its core object 'perf_counter' and naming the subsystem 'perfcounters' has become more and more of a misnomer. With pending code like hw-breakpoints support the 'counter' name is less and less appropriate. All in one, we've decided to rename the subsystem to 'performance events' and to propagate this rename through all fields, variables and API names. (in an ABI compatible fashion) The word 'event' is also a bit shorter than 'counter' - which makes it slightly more convenient to write/handle as well. Thanks goes to Stephane Eranian who first observed this misnomer and suggested a rename. User-space tooling and ABI compatibility is not affected - this patch should be function-invariant. (Also, defconfigs were not touched to keep the size down.) This patch has been generated via the following script: FILES=$(find * -type f | grep -vE 'oprofile|[^K]config') sed -i \ -e 's/PERF_EVENT_/PERF_RECORD_/g' \ -e 's/PERF_COUNTER/PERF_EVENT/g' \ -e 's/perf_counter/perf_event/g' \ -e 's/nb_counters/nb_events/g' \ -e 's/swcounter/swevent/g' \ -e 's/tpcounter_event/tp_event/g' \ $FILES for N in $(find . -name perf_counter.[ch]); do M=$(echo $N | sed 's/perf_counter/perf_event/g') mv $N $M done FILES=$(find . -name perf_event.*) sed -i \ -e 's/COUNTER_MASK/REG_MASK/g' \ -e 's/COUNTER/EVENT/g' \ -e 's/\<event\>/event_id/g' \ -e 's/counter/event/g' \ -e 's/Counter/Event/g' \ $FILES ... to keep it as correct as possible. This script can also be used by anyone who has pending perfcounters patches - it converts a Linux kernel tree over to the new naming. We tried to time this change to the point in time where the amount of pending patches is the smallest: the end of the merge window. Namespace clashes were fixed up in a preparatory patch - and some stylistic fallout will be fixed up in a subsequent patch. ( NOTE: 'counters' are still the proper terminology when we deal with hardware registers - and these sed scripts are a bit over-eager in renaming them. I've undone some of that, but in case there's something left where 'counter' would be better than 'event' we can undo that on an individual basis instead of touching an otherwise nicely automated patch. ) Suggested-by: Stephane Eranian <eranian@google.com> Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Acked-by: Paul Mackerras <paulus@samba.org> Reviewed-by: Arjan van de Ven <arjan@linux.intel.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: David Howells <dhowells@redhat.com> Cc: Kyle McMartin <kyle@mcmartin.ca> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: <linux-arch@vger.kernel.org> LKML-Reference: <new-submission> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-09-15sh: Fix up sh7705 flush_dcache_page() build.Paul Mundt1-1/+2
Type mismatch caused the page deref to blow up, fix it up as per the sh4 change. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09sh: Factor in cpu id for selection of cache colour fixmap.Paul Mundt1-1/+3
In the SMP VIPT case the page copy/clear ops still perform colouring, care needs to be taken that CPUs don't end up stepping on each other, so we give them a bit of room to work with. At the same time, we reduce the worst-case colouring given that these pages are always consumed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09sh: Fix up redundant cache flushing for PAGE_SIZE > 4k.Paul Mundt1-1/+1
If PAGE_SIZE is presently over 4k we do a lot of extra flushing given that we purge the cache 4k at a time. Make it explicitly 4k per iteration, rather than iterating for PAGE_SIZE before looping over again. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09sh: Rework sh4_flush_cache_page() for coherent kmap mapping.Paul Mundt1-27/+48
This builds on top of the MIPS r4k code that does roughly the same thing. This permits the use of kmap_coherent() for mapped pages with dirty dcache lines and falls back on kmap_atomic() otherwise. This also fixes up a problem with the alias check and defers to shm_align_mask directly. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09sh: Kill off segment-based d-cache flushing on SH-4.Paul Mundt1-271/+20
This kills off the unrolled segment based flushers on SH-4 and switches over to a generic unrolled approach derived from the writethrough segment flusher. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09sh: Kill off broken PHYSADDR() usage in sh4_flush_dcache_page().Paul Mundt1-2/+2
PHYSADDR() runs in to issues in 32-bit mode when we do not have the legacy P1/P2 areas mapped, as such, we need to use page_to_phys() directly, which also happens to do the right thing in legacy 29-bit mode. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09sh: sh4_flush_cache_mm() optimizations.Paul Mundt2-120/+10
The i-cache flush in the case of VM_EXEC was added way back when as a sanity measure, and in practice we only care about evicting aliases from the d-cache. As a result, it's possible to drop the i-cache flush completely here. After careful profiling it's also come up that all of the work associated with hunting down aliases and doing ranged flushing ends up generating more overhead than simply blasting away the entire dcache, particularly if there are many mm's that need to be iterated over. As a result of that, just move back to flush_dcache_all() in these cases, which restores the old behaviour, and vastly simplifies the path. Additionally, on platforms without aliases at all, this can simply be nopped out. Presently we have the alias check in the SH-4 specific version, but this is true for all of the platforms, so move the check up to a generic location. This cuts down quite a bit on superfluous cacheop IPIs. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-09sh: Cleanup whitespace damage in sh4_flush_icache_range().Paul Mundt1-30/+33
There was quite a lot of tab->space damage done here from a former patch, clean it up once and for all. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-08sh: Use more aggressive dcache purging in kmap teardown.Paul Mundt2-5/+9
This fixes up a number of outstanding issues observed with old mappings on the same colour hanging around. This requires some more optimal handling, but is a safe fallback until all of the corner cases have been handled. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-03sh: Fix up and optimize the kmap_coherent() interface.Paul Mundt5-46/+49
This fixes up the kmap_coherent/kunmap_coherent() interface for recent changes both in the page fault path and the shared cache flushers, as well as adding in some optimizations. One of the key things to note here is that the TLB flush itself is deferred until the unmap, and the call in to update_mmu_cache() itself goes away, relying on the regular page fault path to handle the lazy dcache writeback if necessary. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01sh: Fix up UP deadlock with SMP-aware cache ops.Paul Mundt1-9/+18
This builds on top of the previous reversion and implements a special on_each_cpu() variant that simple disables preemption across the call while leaving the interrupt state to the function itself. There were some unintended consequences with IRQ disabling in some of these paths on UP that ran in to a deadlock scenario with IRQs being missed. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01Revert "sh: Kill off now redundant local irq disabling."Paul Mundt4-33/+71
This reverts commit 64a6d72213dd810dd55bd0a503c36150af41c3c3. Unfortunately we can't use on_each_cpu() for all of the cache ops, as some of them only require preempt disabling. This seems to be the same issue that impacts the mips r4k caches, where this code was based on. This fixes up a deadlock that showed up in some IRQ context cases. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-09-01Merge branch 'master' into sh/smpPaul Mundt4-27/+71
Conflicts: arch/sh/mm/cache-sh4.c
2009-09-01sh: Fix dcache flushing for N-way write-through caches.Matt Fleming1-21/+27
This adopts the special-cased 2-way write-through dcache flusher for N-ways and moves it in to the generic path. Assignment is done at runtime via the check for the CCR_CACHE_WT bit in the same path as the per-way writeback flushers. Signed-off-by: Matt Fleming <matt@console-pimps.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-27sh: Fix up sh4_flush_dcache_page() build on UP.Paul Mundt1-1/+2
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Fix problems with cache flushing when cache is in write-through modeStuart Menefy1-0/+34
Change the method used to flush the cache in write-through mode to avoid corrupted data being written back to memory. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Fix overzealous checking in __ioremap()Stuart Menefy1-8/+0
Allow peripherals before the start of RAM to be remapped. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-24sh: Improve comments int SH4 cache flushing codeStuart Menefy1-0/+11
This is a pure documentation, to try to explain why the cache flushing code for the SH4 is implemented the way it is. Signed-off-by: Stuart Menefy <stuart.menefy@st.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21sh: Kill off now redundant local irq disabling.Paul Mundt4-71/+33
on_each_cpu() takes care of IRQ and preempt handling, the localized handling in each of the called functions can be killed off. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21sh: Add initial support for SH7757 CPU subtypeYoshihiro Shimoda1-3/+4
Signed-off-by: Yoshihiro Shimoda <shimoda.yoshihiro@renesas.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-21sh: Make cache flushers SMP-aware.Paul Mundt5-148/+184
This does a bit of rework for making the cache flushers SMP-aware. The function pointer-based flushers are renamed to local variants with the exported interface being commonly implemented and wrapping as necessary. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20sh: Fix up cache-sh4 build on SMP.Paul Mundt1-1/+1
mapping is unused on the SMP build, trigger a build error. Move it under the ifdef. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-20sh: Better description of SH-4 PTEA register update.Michael Trimarchi1-3/+6
Signed-off-by: Michael Trimarchi <trimarchimichael@yahoo.it> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-19sh: Build fix for disabled caches.Paul Mundt1-2/+0
This fixes up the build when caches are disabled, by linking in all of the cache routines directly. This paves the way for splitting out separate I and D cache disabling, similar to what sh64 had, and which we want for SH-X3 anyways. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Merge the _32/_64 variants of arch/sh/mm/Makefile.Paul Mundt3-89/+66
Now that there is sufficient shared infrastructure, merge the Makefiles. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Wire up sh5_cache_init().Paul Mundt1-0/+6
Now that the SH-5 code is more or less behaving with the new cacheflush interface, wire up the initialization code. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh64: Kill off dead i/d-cache disabled bits.Paul Mundt1-12/+0
These will be handled through the shared cache interface instead, and they are presently undefined anyways. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Fix up the SH-5 build with caches enabled.Paul Mundt2-282/+48
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Convert cache disabled SH-5 over to new cache interface.Paul Mundt2-6/+1
The caches enabled case needs more work, but is presently broken regardless, so this can be done incrementally. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Convert SH7705 extended mode to new cacheflush interface.Paul Mundt2-10/+30
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Convert SH-3 to new cacheflush interface.Paul Mundt2-10/+21
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Convert SH-2A to new cacheflush interface.Paul Mundt2-4/+19
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Convert SH-2 to new cacheflush interface.Paul Mundt2-3/+16
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2009-08-15sh: Migrate SH-4 cacheflush ops to function pointers.Paul Mundt5-46/+133
This paves the way for allowing individual CPUs to overload the individual flushing routines that they care about without having to depend on weak aliases. SH-4 is converted over initially, as it wires up pretty much everything. The majority of the other CPUs will simply use the default no-op implementation with their own region flushers wired up. Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v1.2.3 (git 2.39.0) at 2024-11-06 03:55:35 +0300