summaryrefslogtreecommitdiff
path: root/arch/s390
AgeCommit message (Collapse)AuthorFilesLines
2020-10-29s390/pci: Mark all VFs as not implementing PCI_COMMAND_MEMORYMatthew Rosato1-2/+3
[ Upstream commit 08b6e22b850c28b6032da1e4d767a33116e23dfb ] For s390 we can have VFs that are passed-through without the associated PF. Firmware provides an emulation layer to allow these devices to operate independently, but is missing emulation of the Memory Space Enable bit. For these as well as linked VFs, set no_command_memory which specifies these devices do not implement PCI_COMMAND_MEMORY. Fixes: abafbc551fdd ("vfio-pci: Invalidate mmaps and block MMIO access on disabled memory") Signed-off-by: Matthew Rosato <mjrosato@linux.ibm.com> Reviewed-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-10-01mm/gup: fix gup_fast with dynamic page table foldingVasily Gorbik1-12/+30
commit d3f7b1bb204099f2f7306318896223e8599bb6a2 upstream. Currently to make sure that every page table entry is read just once gup_fast walks perform READ_ONCE and pass pXd value down to the next gup_pXd_range function by value e.g.: static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) ... pudp = pud_offset(&p4d, addr); This function passes a reference on that local value copy to pXd_offset, and might get the very same pointer in return. This happens when the level is folded (on most arches), and that pointer should not be iterated. On s390 due to the fact that each task might have different 5,4 or 3-level address translation and hence different levels folded the logic is more complex and non-iteratable pointer to a local copy leads to severe problems. Here is an example of what happens with gup_fast on s390, for a task with 3-level paging, crossing a 2 GB pud boundary: // addr = 0x1007ffff000, end = 0x10080001000 static int gup_pud_range(p4d_t p4d, unsigned long addr, unsigned long end, unsigned int flags, struct page **pages, int *nr) { unsigned long next; pud_t *pudp; // pud_offset returns &p4d itself (a pointer to a value on stack) pudp = pud_offset(&p4d, addr); do { // on second iteratation reading "random" stack value pud_t pud = READ_ONCE(*pudp); // next = 0x10080000000, due to PUD_SIZE/MASK != PGDIR_SIZE/MASK on s390 next = pud_addr_end(addr, end); ... } while (pudp++, addr = next, addr != end); // pudp++ iterating over stack return 1; } This happens since s390 moved to common gup code with commit d1874a0c2805 ("s390/mm: make the pxd_offset functions more robust") and commit 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code"). s390 tried to mimic static level folding by changing pXd_offset primitives to always calculate top level page table offset in pgd_offset and just return the value passed when pXd_offset has to act as folded. What is crucial for gup_fast and what has been overlooked is that PxD_SIZE/MASK and thus pXd_addr_end should also change correspondingly. And the latter is not possible with dynamic folding. To fix the issue in addition to pXd values pass original pXdp pointers down to gup_pXd_range functions. And introduce pXd_offset_lockless helpers, which take an additional pXd entry value parameter. This has already been discussed in https://lkml.kernel.org/r/20190418100218.0a4afd51@mschwideX1 Fixes: 1a42010cdc26 ("s390/mm: convert to the generic get_user_pages_fast code") Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Reviewed-by: Alexander Gordeev <agordeev@linux.ibm.com> Reviewed-by: Jason Gunthorpe <jgg@nvidia.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Reviewed-by: John Hubbard <jhubbard@nvidia.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Dave Hansen <dave.hansen@intel.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will@kernel.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jeff Dike <jdike@addtoit.com> Cc: Richard Weinberger <richard@nod.at> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Andrey Ryabinin <aryabinin@virtuozzo.com> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Claudio Imbrenda <imbrenda@linux.ibm.com> Cc: <stable@vger.kernel.org> [5.2+] Link: https://lkml.kernel.org/r/patch.git-943f1e5dcff2.your-ad-here.call-01599856292-ext-8676@work.hours Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-10-01s390/init: add missing __init annotationsIlya Leoshkevich1-3/+3
[ Upstream commit fcb2b70cdb194157678fb1a75f9ff499aeba3d2a ] Add __init to reserve_memory_end, reserve_oldmem and remove_oldmem. Sometimes these functions are not inlined, and then the build complains about section mismatch. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-09-23s390/pci: fix leak of DMA tables on hard unplugNiklas Schnelle2-0/+6
commit afdf9550e54627fcf4dd609bdc1153059378cdf5 upstream. commit f606b3ef47c9 ("s390/pci: adapt events for zbus") removed the zpci_disable_device() call for a zPCI event with PEC 0x0304 because the device is already deconfigured by the platform. This however skips the Linux side of the disable in particular it leads to leaking the DMA tables and bitmaps because zpci_dma_exit_device() is never called on the device. If the device transitions to the Reserved state we call zpci_zdev_put() but zpci_release_device() will not call zpci_disable_device() because the state of the zPCI function is already ZPCI_FN_STATE_STANDBY. If the device is put into the Standby state, zpci_disable_device() is not called and the device is assumed to have been put in Standby through platform action. At this point the device may be removed by a subsequent event with PEC 0x0308 or 0x0306 which calls zpci_zdev_put() with the same problem as above or the device may be configured again in which case zpci_disable_device() is also not called. Fix this by calling zpci_disable_device() explicitly for PEC 0x0304 as before. To make it more clear that zpci_disable_device() may be called, even if the lower level device has already been disabled by the platform, add a comment to zpci_disable_device(). Cc: <stable@vger.kernel.org> # 5.8 Fixes: f606b3ef47c9 ("s390/pci: adapt events for zbus") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-23s390: add 3f program exception handlerJanosch Frank3-1/+22
commit cd4d3d5f21ddbfae3f686ac0ff405f21f7847ad3 upstream. Program exception 3f (secure storage violation) can only be detected when the CPU is running in SIE with a format 4 state description, e.g. running a protected guest. Because of this and because user space partly controls the guest memory mapping and can trigger this exception, we want to send a SIGSEGV to the process running the guest and not panic the kernel. Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Cc: <stable@vger.kernel.org> # 5.7 Fixes: 084ea4d611a3 ("s390/mm: add (non)secure page access exceptions handlers") Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09s390: fix GENERIC_LOCKBREAK dependency typo in KconfigEric Farman1-1/+1
commit 114b9df419bf5db097b322ebb03fcf2f502f9380 upstream. Commit fa686453053b ("sched/rt, s390: Use CONFIG_PREEMPTION") changed a bunch of uses of CONFIG_PREEMPT to _PREEMPTION. Except in the Kconfig it used two T's. That's the only place in the system where that spelling exists, so let's fix that. Fixes: fa686453053b ("sched/rt, s390: Use CONFIG_PREEMPTION") Cc: <stable@vger.kernel.org> # 5.6 Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-09-09s390: don't trace preemption in percpu macrosSven Schnelle1-14/+14
[ Upstream commit 1196f12a2c960951d02262af25af0bb1775ebcc2 ] Since commit a21ee6055c30 ("lockdep: Change hardirq{s_enabled,_context} to per-cpu variables") the lockdep code itself uses percpu variables. This leads to recursions because the percpu macros are calling preempt_enable() which might call trace_preempt_on(). Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26s390/ptrace: fix storage key handlingHeiko Carstens1-2/+5
[ Upstream commit fd78c59446b8d050ecf3e0897c5a486c7de7c595 ] The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Since existing user space does not necessarily query and set the access key correctly, just ignore the user space provided key and use the correct one. Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero. Fixes: 262832bc5acd ("s390/ptrace: add runtime instrumention register get/set") Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26s390/runtime_instrumentation: fix storage key handlingHeiko Carstens1-1/+1
[ Upstream commit 9eaba29c7985236e16468f4e6a49cc18cf01443e ] The key member of the runtime instrumentation control block contains only the access key, not the complete storage key. Therefore the value must be shifted by four bits. Note: this is only relevant for debugging purposes in case somebody compiles a kernel with a default storage access key set to a value not equal to zero. Fixes: e4b8b3f33fca ("s390: add support for runtime instrumentation") Reported-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-26s390/pci: ignore stale configuration request eventNiklas Schnelle1-0/+3
commit b76fee1bc56c31a9d2a49592810eba30cc06d61a upstream. A configuration request event may be stale, that is the event may reference a zdev which was already configured. This can happen when a hotplug happens during boot such that the device is discovered and configured in the initial clp_list_pci(), then after initialization we enable events and process the original configuration request which additionally still contains the old disabled function handle leading to a failure during device enablement and subsequent I/O lockout. Fix this by restoring the check that the device to be configured is in standby which was removed in commit f606b3ef47c9 ("s390/pci: adapt events for zbus"). This check does not need serialization as we only enable the events after zPCI has fully initialized, which includes the initial clp_list_pci(), rescan only does updates and events are serialized with respect to each other. Fixes: f606b3ef47c9 ("s390/pci: adapt events for zbus") Cc: <stable@vger.kernel.org> # 5.8 Reported-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com> Tested-by: Shalini Chellathurai Saroja <shalini@linux.ibm.com> Acked-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-26s390/pci: fix PF/VF linking on hot plugNiklas Schnelle3-13/+32
commit b97bf44f99155e57088e16974afb1f2d7b5287aa upstream. Currently there are four places in which a PCI function is scanned and made available to drivers: 1. In pci_scan_root_bus() as part of the initial zbus creation. 2. In zpci_bus_add_devices() when registering a device in configured state on a zbus that has already been scanned. 3. When a function is already known to zPCI (in reserved/standby state) and configuration is triggered through firmware by PEC 0x301. 4. When a device is already known to zPCI (in standby/reserved state) and configuration is triggered from within Linux using enable_slot(). The PF/VF linking step and setting of pdev->is_virtfn introduced with commit e5794cf1a270 ("s390/pci: create links between PFs and VFs") was only triggered for the second case, which is where VFs created through sriov_numvfs usually land. However unlike some other platforms but like POWER VFs can be individually enabled/disabled through /sys/bus/pci/slots. Fix this by doing VF setup as part of pcibios_bus_add_device() which is called in all of the above cases. Finally to remove the PF/VF links call the common code pci_iov_remove_virtfn() function to remove linked VFs. This takes care of the necessary sysfs cleanup. Fixes: e5794cf1a270 ("s390/pci: create links between PFs and VFs") Cc: <stable@vger.kernel.org> # 5.8: 2f0230b2f2d5: s390/pci: re-introduce zpci_remove_device() Cc: <stable@vger.kernel.org> # 5.8 Acked-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-26s390/pci: re-introduce zpci_remove_device()Niklas Schnelle2-9/+14
commit 2f0230b2f2d5fd287a85583eefb5aed35b6fe510 upstream. For fixing the PF to VF link removal we need to perform some action on every removal of a zdev from the common PCI subsystem. So in preparation re-introduce zpci_remove_device() and use that instead of directly calling the common code functions. This was actually still declared from earlier code but no longer implemented. Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-26s390/pci: fix zpci_bus_link_virtfn()Niklas Schnelle1-10/+15
commit 3cddb79afc60bcdb5fd9dd7a1c64a8d03bdd460f upstream. We were missing the pci_dev_put() for candidate PFs. Furhtermore in discussion with upstream it turns out that somewhat counterintuitively some common code, in particular the vfio-pci driver, assumes that pdev->is_virtfn always implies that pdev->physfn is set, i.e. that VFs are always linked. While POWER does seem to set pdev->is_virtfn even for unlinked functions (see comments in arch/powerpc/kernel/eeh.c:eeh_debugfs_break_device()) for now just be safe and only set pdev->is_virtfn on linking. Also make sure that we only search for parent PFs if the zbus is multifunction and we thus know the devfn values supplied by firmware come from the RID. Fixes: e5794cf1a270 ("s390/pci: create links between PFs and VFs") Cc: <stable@vger.kernel.org> # 5.8 Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-21s390/Kconfig: add missing ZCRYPT dependency to VFIO_APKrzysztof Kozlowski1-0/+1
[ Upstream commit 929a343b858612100cb09443a8aaa20d4a4706d3 ] The VFIO_AP uses ap_driver_register() (and deregister) functions implemented in ap_bus.c (compiled into ap.o). However the ap.o will be built only if CONFIG_ZCRYPT is selected. This was not visible before commit e93a1695d7fb ("iommu: Enable compile testing for some of drivers") because the CONFIG_VFIO_AP depends on CONFIG_S390_AP_IOMMU which depends on the missing CONFIG_ZCRYPT. After adding COMPILE_TEST, it is possible to select a configuration with VFIO_AP and S390_AP_IOMMU but without the ZCRYPT. Add proper dependency to the VFIO_AP to fix build errors: ERROR: modpost: "ap_driver_register" [drivers/s390/crypto/vfio_ap.ko] undefined! ERROR: modpost: "ap_driver_unregister" [drivers/s390/crypto/vfio_ap.ko] undefined! Reported-by: kernel test robot <lkp@intel.com> Fixes: e93a1695d7fb ("iommu: Enable compile testing for some of drivers") Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-21s390/test_unwind: fix possible memleak in test_unwind()Wang Hai1-0/+1
[ Upstream commit 75d3e7f4769d276a056efa1cc7f08de571fc9b4b ] test_unwind() misses to call kfree(bt) in an error path. Add the missed function call to fix it. Fixes: 0610154650f1 ("s390/test_unwind: print verbose unwinding results") Reported-by: Hulk Robot <hulkci@huawei.com> Signed-off-by: Wang Hai <wanghai38@huawei.com> Acked-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19s390/gmap: improve THP splittingGerald Schaefer1-7/+20
commit ba925fa35057a062ac98c3e8138b013ce4ce351c upstream. During s390_enable_sie(), we need to take care of splitting all qemu user process THP mappings. This is currently done with follow_page(FOLL_SPLIT), by simply iterating over all vma ranges, with PAGE_SIZE increment. This logic is sub-optimal and can result in a lot of unnecessary overhead, especially when using qemu and ASAN with large shadow map. Ilya reported significant system slow-down with one CPU busy for a long time and overall unresponsiveness. Fix this by using walk_page_vma() and directly calling split_huge_pmd() only for present pmds, which greatly reduces overhead. Cc: <stable@vger.kernel.org> # v5.4+ Reported-by: Ilya Leoshkevich <iii@linux.ibm.com> Tested-by: Ilya Leoshkevich <iii@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Gerald Schaefer <gerald.schaefer@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-19s390/numa: set node distance to LOCAL_DISTANCEAlexander Gordeev1-6/+0
commit 535e4fc623fab2e09a0653fc3a3e17f382ad0251 upstream. The node distance is hardcoded to 0, which causes a trouble for some user-level applications. In particular, "libnuma" expects the distance of a node to itself as LOCAL_DISTANCE. This update removes the offending node distance override. Cc: <stable@vger.kernel.org> # 4.4 Fixes: 3a368f742da1 ("s390/numa: add core infrastructure") Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-08-19s390/bpf: Tolerate not converging code shrinkingIlya Leoshkevich1-1/+26
[ Upstream commit 1491b73311a15bb5beeab5d30e03bff761ef6c18 ] "BPF_MAXINSNS: Maximum possible literals" unnecessarily falls back to the interpreter because of failing sanity check in bpf_set_addr. The problem is that there are a lot of branches that can be shrunk, and doing so opens up the possibility to shrink even more. This process does not converge after 3 passes, causing code offsets to change during the codegen pass, which must never happen. Fix by inserting nops during codegen pass in order to preserve code offets. Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200717165326.6786-5-iii@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19s390/bpf: Use brcl for jumping to exit_ip if necessaryIlya Leoshkevich1-2/+6
[ Upstream commit 5fa6974471c5518a50bdd814067508dbcb477251 ] "BPF_MAXINSNS: Maximum possible literals" test causes panic with bpf_jit_harden = 2. The reason is that BPF_JMP | BPF_EXIT is always emitted as brc, however, after removal of JITed image size limitations, brcl might be required. Fix by using brcl when necessary. Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Link: https://lore.kernel.org/bpf/20200717165326.6786-4-iii@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-08-19s390/bpf: Fix sign extension in branch_kuIlya Leoshkevich1-15/+4
[ Upstream commit 7477d43be5b1448bc0d4c85cb185a0144cc080e1 ] Both signed and unsigned variants of BPF_JMP | BPF_K require sign-extending the immediate. JIT emits cgfi for the signed case, which is correct, and clgfi for the unsigned case, which is not correct: clgfi zero-extends the immediate. s390 does not provide an instruction that does sign-extension and unsigned comparison at the same time. Therefore, fix by first loading the sign-extended immediate into work register REG_1 and proceeding as if it's BPF_X. Fixes: 4e9b4a6883dd ("s390/bpf: Use relative long branches") Reported-by: Seth Forshee <seth.forshee@canonical.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Alexei Starovoitov <ast@kernel.org> Tested-by: Seth Forshee <seth.forshee@canonical.com> Link: https://lore.kernel.org/bpf/20200717165326.6786-3-iii@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-21s390/cpum_cf,perf: change DFLT_CCERROR counter nameThomas Richter1-2/+2
Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15. This counter counts completed DEFLATE instructions with exit code 0, 1 or 2. Since exit code 0 means success and exit code 1 or 2 indicate errors, change the counter name to avoid confusion. This counter is incremented each time the DEFLATE instruction completed regardless if an error was detected or not. Fixes: d68d5d51dc89 ("s390/cpum_cf: Add new extended counters for IBM z15") Fixes: e7950166e402 ("perf vendor events s390: Add new deflate counters for IBM z15") Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-10Merge tag 's390-5.8-5' of ↵Linus Torvalds1-1/+1
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Heiko Carstens: "This is mainly due to the fact that Gerald Schaefer's and also my old email addresses currently do not work any longer. Therefore we decided to switch to new email addresses and reflect that in the MAINTAINERS file. - Update email addresses in MAINTAINERS file and add .mailmap entries for Gerald Schaefer and Heiko Carstens. - Fix huge pte soft dirty copying" * tag 's390-5.8-5' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: MAINTAINERS: update email address for Gerald Schaefer MAINTAINERS: update email address for Heiko Carstens s390/mm: fix huge pte soft dirty copying
2020-07-09s390/mm: fix huge pte soft dirty copyingJanosch Frank1-1/+1
If the pmd is soft dirty we must mark the pte as soft dirty (and not dirty). This fixes some cases for guest migration with huge page backings. Cc: <stable@vger.kernel.org> # 4.8 Fixes: bc29b7ac1d9f ("s390/mm: clean up pte/pmd encoding") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
2020-07-06Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds1-4/+4
Pull kvm fixes from Paolo Bonzini: "Bugfixes and a one-liner patch to silence a sparse warning" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: arm64: Stop clobbering x0 for HVC_SOFT_RESTART KVM: arm64: PMU: Fix per-CPU access in preemptible context KVM: VMX: Use KVM_POSSIBLE_CR*_GUEST_BITS to initialize guest/host masks KVM: x86: Mark CR4.TSD as being possibly owned by the guest KVM: x86: Inject #GP if guest attempts to toggle CR4.LA57 in 64-bit mode kvm: use more precise cast and do not drop __user KVM: x86: bit 8 of non-leaf PDPEs is not reserved KVM: X86: Fix async pf caused null-ptr-deref KVM: arm64: vgic-v4: Plug race between non-residency and v4.1 doorbell KVM: arm64: pvtime: Ensure task delay accounting is enabled KVM: arm64: Fix kvm_reset_vcpu() return code being incorrect with SVE KVM: arm64: Annotate hyp NMI-related functions as __always_inline KVM: s390: reduce number of IO pins to 1
2020-07-01s390: update defconfigsHeiko Carstens3-19/+73
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-07-01s390/cpum_sf: prohibit callchain data collectionThomas Richter1-1/+10
CPU Measurement sampling facility on s390 does not support perf tool collection of callchain data using --call-graph option. The sampling facility collects samples in a ring buffer which includes only the instruction address the samples were taken. When the ring buffer hits a watermark, a measurement alert interrupt is triggered and handled by the performance measurement unit (PMU) device driver. It collects the samples and feeds each sample to the perf ring buffer in the common code via functions perf_prepare_sample()/perf_output_sample(). When function perf_prepare_sample() is called to collect sample data's callchain, user register values or stack area, invalid data is picked, because the context of the collected information does not match the context when the sample was taken. There is currently no way to provide the callchain and other information, because the hardware sampler does not collect this information. Therefore prohibit sampling when the user requests a callchain graph from the hardware sampler. Return -EOPNOTSUPP to the user in this case. If call chains are really wanted, users need to specify software event cpu-clock to get the callchain information from a software event. Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-06-29s390/setup: init jump labels before command line parsingVasily Gorbik1-0/+1
Command line parameters might set static keys. This is true for s390 at least since commit 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options"). To avoid the following WARN: static_key_enable_cpuslocked(): static key 'init_on_alloc+0x0/0x40' used before call to jump_label_init() call jump_label_init() just before parse_early_param(). jump_label_init() is safe to call multiple times (x86 does that), doesn't do any memory allocations and hence should be safe to call that early. Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Cc: <stable@vger.kernel.org> # 5.3: d6df52e9996d: s390/maccess: add no DAT mode to kernel_write Cc: <stable@vger.kernel.org> # 5.3 Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-06-29s390/maccess: add no DAT mode to kernel_writeVasily Gorbik1-5/+9
To be able to patch kernel code before paging is initialized do plain memcpy if DAT is off. This is required to enable early jump label initialization. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-06-29s390/pci: fix enabling a reserved PCI functionNiklas Schnelle1-1/+12
In usual IPL or hot plug scenarios a zPCI function transitions directly from reserved (invisible to Linux) to configured state or is configured by Linux itself using an SCLP, however it can also first go from reserved to standby and then from standby to configured without Linux initiative. In this scenario we first get a PEC event 0x302 and then 0x301. This may happen for example when the device is deconfigured at another LPAR and made available for this LPAR. It may also happen under z/VM when a device is attached while in some inconsistent state. However when we get the 0x301 the device is already known to zPCI so calling zpci_create() will add it twice resulting in the below BUG. Instead we should only enable the existing device and finally scan it through the PCI subsystem. list_add double add: new=00000000ed5a9008, prev=00000000ed5a9008, next=0000000083502300. kernel BUG at lib/list_debug.c:31! Krnl PSW : 0704c00180000000 0000000082dc2db8 (__list_add_valid+0x70/0xa8) Call Trace: [<0000000082dc2db8>] __list_add_valid+0x70/0xa8 ([<0000000082dc2db4>] __list_add_valid+0x6c/0xa8) [<00000000828ea920>] zpci_create_device+0x60/0x1b0 [<00000000828ef04a>] zpci_event_availability+0x282/0x2f0 [<000000008315f848>] chsc_process_crw+0x2b8/0xa18 [<000000008316735c>] crw_collect_info+0x254/0x348 [<00000000829226ea>] kthread+0x14a/0x168 [<000000008319d5c0>] ret_from_fork+0x24/0x2c Fixes: f606b3ef47c9 ("s390/pci: adapt events for zbus") Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com> Tested-by: Alexander Egorenkov <egorenar@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-06-23s390/debug: avoid kernel warning on too large number of pagesChristian Borntraeger1-1/+2
When specifying insanely large debug buffers a kernel warning is printed. The debug code does handle the error gracefully, though. Instead of duplicating the check let us silence the warning to avoid crashes when panic_on_warn is used. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-06-23s390/kasan: fix early pgm check handler executionVasily Gorbik1-0/+2
Currently if early_pgm_check_handler is called it ends up in pgm check loop. The problem is that early_pgm_check_handler is instrumented by KASAN but executed without DAT flag enabled which leads to addressing exception when KASAN checks try to access shadow memory. Fix that by executing early handlers with DAT flag on under KASAN as expected. Reported-and-tested-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-06-23s390: fix system call single steppingSven Schnelle1-1/+1
When single stepping an svc instruction on s390, the kernel is entered with a PER program check interruption. The program check handler than jumps to the system call handler by reloading the PSW. The code didn't set GPR13 to the thread pointer in struct task_struct. This made the kernel access invalid memory while trying to fetch the syscall function address. Fix this by always assigned GPR13 after .Lsysc_per. Fixes: 0b0ed657fe00 ("s390: remove critical section cleanup from entry.S") Reported-and-tested-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2020-06-20Merge tag 's390-5.8-2' of ↵Linus Torvalds12-40/+106
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - a few ptrace fixes mostly for strace and seccomp_bpf kernel tests findings - cleanup unused pm callbacks in virtio ccw - replace kmalloc + memset with kzalloc in crypto - use $(LD) for vDSO linkage to make clang happy - fix vDSO clock_getres() to preserve the same behaviour as posix_get_hrtimer_res() - fix workqueue cpumask warning when NUMA=n and nr_node_ids=2 - reduce SLSB writes during input processing, improve warnings and cleanup qdio_data usage in qdio - a few fixes to use scnprintf() instead of snprintf() * tag 's390-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390: fix syscall_get_error for compat processes s390/qdio: warn about unexpected SLSB states s390/qdio: clean up usage of qdio_data s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODES s390/vdso: fix vDSO clock_getres() s390/vdso: Use $(LD) instead of $(CC) to link vDSO s390/protvirt: use scnprintf() instead of snprintf() s390: use scnprintf() in sys_##_prefix##_##_name##_show s390/crypto: use scnprintf() instead of snprintf() s390/zcrypt: use kzalloc s390/virtio: remove unused pm callbacks s390/qdio: reduce SLSB writes during Input Queue processing selftests/seccomp: s390 shares the syscall and return value register s390/ptrace: fix setting syscall number s390/ptrace: pass invalid syscall numbers to tracing s390/ptrace: return -ENOSYS when invalid syscall is supplied s390/seccomp: pass syscall arguments via seccomp_data s390/qdio: fine-tune SLSB update
2020-06-18maccess: rename probe_kernel_address to get_kernel_nofaultChristoph Hellwig1-1/+1
Better describe what this helper does, and match the naming of copy_from_kernel_nofault. Also switch the argument order around, so that it acts and looks like get_user(). Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-18KVM: s390: reduce number of IO pins to 1Christian Borntraeger1-4/+4
The current number of KVM_IRQCHIP_NUM_PINS results in an order 3 allocation (32kb) for each guest start/restart. This can result in OOM killer activity even with free swap when the memory is fragmented enough: kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0 kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu kernel: Hardware name: IBM 8562 T02 Z06 (LPAR) kernel: Call Trace: kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0) kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0 kernel: [<00000001f8687032>] dump_header+0x62/0x258 kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180 kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580 kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90 kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320 kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0 kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0 kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0 kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0 kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760 kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690 kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0 kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40 kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8 As far as I can tell s390x does not use the iopins as we bail our for anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to reduce the memory footprint. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.com
2020-06-18s390: fix syscall_get_error for compat processesDmitry V. Levin1-1/+11
If both the tracer and the tracee are compat processes, and gprs[2] is assigned a value by __poke_user_compat, then the higher 32 bits of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and syscall_get_error() always returns 0. Fix the implementation by sign-extending the value for compat processes the same way as x86 implementation does. The bug was exposed to user space by commit 201766a20e30f ("ptrace: add PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite. This change fixes strace syscall tampering on s390. Link: https://lkml.kernel.org/r/20200602180051.GA2427@altlinux.org Fixes: 753c4dd6a2fa2 ("[S390] ptrace changes") Cc: Elvira Khabirova <lineprinter@altlinux.org> Cc: stable@vger.kernel.org # v2.6.28+ Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-17maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofaultChristoph Hellwig1-2/+2
Better describe what these functions do. Suggested-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-06-16s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODESHeiko Carstens1-0/+1
Qian Cai reported: """ When NUMA=n and nr_node_ids=2, in apply_wqattrs_prepare(), it has, for_each_node(node) { if (wq_calc_node_cpumask(... where it will trigger a booting warning, WARNING: workqueue cpumask: online intersect > possible intersect because it found 2 nodes and wq_numa_possible_cpumask[1] is an empty cpumask. """ Let NODES_SHIFT depend on NEED_MULTIPLE_NODES like it is done on other architectures in order to fix this. Fixes: 701dc81e7412 ("s390/mm: remove fake numa support") Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/vdso: fix vDSO clock_getres()Vincenzo Frascino4-6/+8
clock_getres in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; and hrtimer_resolution depends on the enablement of the high resolution timers that can happen either at compile or at run time. Fix the s390 vdso implementation of clock_getres keeping a copy of hrtimer_resolution in vdso data and using that directly. Link: https://lkml.kernel.org/r/20200324121027.21665-1-vincenzo.frascino@arm.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [heiko.carstens@de.ibm.com: use llgf for proper zero extension] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/vdso: Use $(LD) instead of $(CC) to link vDSONathan Chancellor1-6/+4
Currently, the VDSO is being linked through $(CC). This does not match how the rest of the kernel links objects, which is through the $(LD) variable. When clang is built in a default configuration, it first attempts to use the target triple's default linker, which is just ld. However, the user can override this through the CLANG_DEFAULT_LINKER cmake define so that clang uses another linker by default, such as LLVM's own linker, ld.lld. This can be useful to get more optimized links across various different projects. However, this is problematic for the s390 vDSO because ld.lld does not have any s390 emulatiom support: https://github.com/llvm/llvm-project/blob/llvmorg-10.0.1-rc1/lld/ELF/Driver.cpp#L132-L150 Thus, if a user is using a toolchain with ld.lld as the default, they will see an error, even if they have specified ld.bfd through the LD make variable: $ make -j"$(nproc)" -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- LLVM=1 \ LD=s390x-linux-gnu-ld \ defconfig arch/s390/kernel/vdso64/ ld.lld: error: unknown emulation: elf64_s390 clang-11: error: linker command failed with exit code 1 (use -v to see invocation) Normally, '-fuse-ld=bfd' could be used to get around this; however, this can be fragile, depending on paths and variable naming. The cleaner solution for the kernel is to take advantage of the fact that $(LD) can be invoked directly, which bypasses the heuristics of $(CC) and respects the user's choice. Similar changes have been done for ARM, ARM64, and MIPS. Link: https://lkml.kernel.org/r/20200602192523.32758-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/1041 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> [heiko.carstens@de.ibm.com: add --build-id flag] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/protvirt: use scnprintf() instead of snprintf()Chen Zhou1-4/+4
snprintf() returns the number of bytes that would be written, which may be greater than the the actual length to be written. uv_query_facilities() should return the number of bytes printed into the buffer. This is the return value of scnprintf(). The other functions are the same. Link: https://lkml.kernel.org/r/20200509085608.41061-4-chenzhou10@huawei.com Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390: use scnprintf() in sys_##_prefix##_##_name##_showChen Zhou1-1/+1
snprintf() returns the number of bytes that would be written, which may be greater than the the actual length to be written. show() methods should return the number of bytes printed into the buffer. This is the return value of scnprintf(). Link: https://lkml.kernel.org/r/20200509085608.41061-3-chenzhou10@huawei.com Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/crypto: use scnprintf() instead of snprintf()Chen Zhou1-7/+7
snprintf() returns the number of bytes that would be written, which may be greater than the the actual length to be written. show() methods should return the number of bytes printed into the buffer. This is the return value of scnprintf(). Link: https://lkml.kernel.org/r/20200509085608.41061-2-chenzhou10@huawei.com Signed-off-by: Chen Zhou <chenzhou10@huawei.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/ptrace: fix setting syscall numberSven Schnelle1-1/+30
When strace wants to update the syscall number, it sets GPR2 to the desired number and updates the GPR via PTRACE_SETREGSET. It doesn't update regs->int_code which would cause the old syscall executed on syscall restart. As we cannot change the ptrace ABI and don't have a field for the interruption code, check whether the tracee is in a syscall and the last instruction was svc. In that case assume that the tracer wants to update the syscall number and copy the GPR2 value to regs->int_code. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/ptrace: pass invalid syscall numbers to tracingSven Schnelle2-5/+3
tracing expects to see invalid syscalls, so pass it through. The syscall path in entry.S checks the syscall number before looking up the handler, so it is still safe. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/ptrace: return -ENOSYS when invalid syscall is suppliedSven Schnelle1-6/+13
The current code returns the syscall number which an invalid syscall number is supplied and tracing is enabled. This makes the strace testsuite fail. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-16s390/seccomp: pass syscall arguments via seccomp_dataSven Schnelle1-5/+26
Use __secure_computing() and pass the register data via seccomp_data so secure computing doesn't have to fetch it again. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-06-13Merge tag 'kbuild-v5.8-2' of ↵Linus Torvalds3-5/+5
git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild Pull more Kbuild updates from Masahiro Yamada: - fix build rules in binderfs sample - fix build errors when Kbuild recurses to the top Makefile - covert '---help---' in Kconfig to 'help' * tag 'kbuild-v5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: treewide: replace '---help---' in Kconfig files with 'help' kbuild: fix broken builds because of GZIP,BZIP2,LZOP variables samples: binderfs: really compile this sample and fix build issues
2020-06-13treewide: replace '---help---' in Kconfig files with 'help'Masahiro Yamada3-5/+5
Since commit 84af7a6194e4 ("checkpatch: kconfig: prefer 'help' over '---help---'"), the number of '---help---' has been gradually decreasing, but there are still more than 2400 instances. This commit finishes the conversion. While I touched the lines, I also fixed the indentation. There are a variety of indentation styles found. a) 4 spaces + '---help---' b) 7 spaces + '---help---' c) 8 spaces + '---help---' d) 1 space + 1 tab + '---help---' e) 1 tab + '---help---' (correct indentation) f) 1 tab + 1 space + '---help---' g) 1 tab + 2 spaces + '---help---' In order to convert all of them to 1 tab + 'help', I ran the following commend: $ find . -name 'Kconfig*' | xargs sed -i 's/^[[:space:]]*---help---/\thelp/' Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
2020-06-12Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-2/+4
Pull more KVM updates from Paolo Bonzini: "The guest side of the asynchronous page fault work has been delayed to 5.9 in order to sync with Thomas's interrupt entry rework, but here's the rest of the KVM updates for this merge window. MIPS: - Loongson port PPC: - Fixes ARM: - Fixes x86: - KVM_SET_USER_MEMORY_REGION optimizations - Fixes - Selftest fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (62 commits) KVM: x86: do not pass poisoned hva to __kvm_set_memory_region KVM: selftests: fix sync_with_host() in smm_test KVM: async_pf: Inject 'page ready' event only if 'page not present' was previously injected KVM: async_pf: Cleanup kvm_setup_async_pf() kvm: i8254: remove redundant assignment to pointer s KVM: x86: respect singlestep when emulating instruction KVM: selftests: Don't probe KVM_CAP_HYPERV_ENLIGHTENED_VMCS when nested VMX is unsupported KVM: selftests: do not substitute SVM/VMX check with KVM_CAP_NESTED_STATE check KVM: nVMX: Consult only the "basic" exit reason when routing nested exit KVM: arm64: Move hyp_symbol_addr() to kvm_asm.h KVM: arm64: Synchronize sysreg state on injecting an AArch32 exception KVM: arm64: Make vcpu_cp1x() work on Big Endian hosts KVM: arm64: Remove host_cpu_context member from vcpu structure KVM: arm64: Stop sparse from moaning at __hyp_this_cpu_ptr KVM: arm64: Handle PtrAuth traps early KVM: x86: Unexport x86_fpu_cache and make it static KVM: selftests: Ignore KVM 5-level paging support for VM_MODE_PXXV48_4K KVM: arm64: Save the host's PtrAuth keys in non-preemptible context KVM: arm64: Stop save/restoring ACTLR_EL1 KVM: arm64: Add emulation for 32bit guests accessing ACTLR2 ...
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-25 21:21:39 +0300