summaryrefslogtreecommitdiff
path: root/arch/s390
AgeCommit message (Collapse)AuthorFilesLines
2020-07-29s390/cpum_cf,perf: change DFLT_CCERROR counter nameThomas Richter1-2/+2
commit 3d3af181d370069861a3be94608464e2ff3682e2 upstream. Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15. This counter counts completed DEFLATE instructions with exit code 0, 1 or 2. Since exit code 0 means success and exit code 1 or 2 indicate errors, change the counter name to avoid confusion. This counter is incremented each time the DEFLATE instruction completed regardless if an error was detected or not. Fixes: d68d5d51dc89 ("s390/cpum_cf: Add new extended counters for IBM z15") Fixes: e7950166e402 ("perf vendor events s390: Add new deflate counters for IBM z15") Cc: stable@vger.kernel.org # v5.7 Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16s390/maccess: add no DAT mode to kernel_writeVasily Gorbik1-5/+9
[ Upstream commit d6df52e9996dcc2062c3d9c9123288468bb95b52 ] To be able to patch kernel code before paging is initialized do plain memcpy if DAT is off. This is required to enable early jump label initialization. Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16s390: Change s390_kernel_write() return type to match memcpy()Josh Poimboeuf2-4/+7
[ Upstream commit cb2cceaefb4c4dc28fc27ff1f1b2d258bfc10353 ] s390_kernel_write()'s function type is almost identical to memcpy(). Change its return type to "void *" so they can be used interchangeably. Cc: linux-s390@vger.kernel.org Cc: heiko.carstens@de.ibm.com Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com> Acked-by: Joe Lawrence <joe.lawrence@redhat.com> Acked-by: Miroslav Benes <mbenes@suse.cz> Acked-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> # s390 Signed-off-by: Jiri Kosina <jkosina@suse.cz> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16s390/mm: fix huge pte soft dirty copyingJanosch Frank1-1/+1
commit 528a9539348a0234375dfaa1ca5dbbb2f8f8e8d2 upstream. If the pmd is soft dirty we must mark the pte as soft dirty (and not dirty). This fixes some cases for guest migration with huge page backings. Cc: <stable@vger.kernel.org> # 4.8 Fixes: bc29b7ac1d9f ("s390/mm: clean up pte/pmd encoding") Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Janosch Frank <frankja@linux.ibm.com> Signed-off-by: Heiko Carstens <hca@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16s390/setup: init jump labels before command line parsingVasily Gorbik1-0/+1
commit 95e61b1b5d6394b53d147c0fcbe2ae70fbe09446 upstream. Command line parameters might set static keys. This is true for s390 at least since commit 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options"). To avoid the following WARN: static_key_enable_cpuslocked(): static key 'init_on_alloc+0x0/0x40' used before call to jump_label_init() call jump_label_init() just before parse_early_param(). jump_label_init() is safe to call multiple times (x86 does that), doesn't do any memory allocations and hence should be safe to call that early. Fixes: 6471384af2a6 ("mm: security: introduce init_on_alloc=1 and init_on_free=1 boot options") Cc: <stable@vger.kernel.org> # 5.3: d6df52e9996d: s390/maccess: add no DAT mode to kernel_write Cc: <stable@vger.kernel.org> # 5.3 Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-07-16s390/kasan: fix early pgm check handler executionVasily Gorbik1-0/+2
[ Upstream commit 998f5bbe3dbdab81c1cfb1aef7c3892f5d24f6c7 ] Currently if early_pgm_check_handler is called it ends up in pgm check loop. The problem is that early_pgm_check_handler is instrumented by KASAN but executed without DAT flag enabled which leads to addressing exception when KASAN checks try to access shadow memory. Fix that by executing early handlers with DAT flag on under KASAN as expected. Reported-and-tested-by: Alexander Egorenkov <egorenar@linux.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-16KVM: s390: reduce number of IO pins to 1Christian Borntraeger1-4/+4
[ Upstream commit 774911290c589e98e3638e73b24b0a4d4530e97c ] The current number of KVM_IRQCHIP_NUM_PINS results in an order 3 allocation (32kb) for each guest start/restart. This can result in OOM killer activity even with free swap when the memory is fragmented enough: kernel: qemu-system-s39 invoked oom-killer: gfp_mask=0x440dc0(GFP_KERNEL_ACCOUNT|__GFP_COMP|__GFP_ZERO), order=3, oom_score_adj=0 kernel: CPU: 1 PID: 357274 Comm: qemu-system-s39 Kdump: loaded Not tainted 5.4.0-29-generic #33-Ubuntu kernel: Hardware name: IBM 8562 T02 Z06 (LPAR) kernel: Call Trace: kernel: ([<00000001f848fe2a>] show_stack+0x7a/0xc0) kernel: [<00000001f8d3437a>] dump_stack+0x8a/0xc0 kernel: [<00000001f8687032>] dump_header+0x62/0x258 kernel: [<00000001f8686122>] oom_kill_process+0x172/0x180 kernel: [<00000001f8686abe>] out_of_memory+0xee/0x580 kernel: [<00000001f86e66b8>] __alloc_pages_slowpath+0xd18/0xe90 kernel: [<00000001f86e6ad4>] __alloc_pages_nodemask+0x2a4/0x320 kernel: [<00000001f86b1ab4>] kmalloc_order+0x34/0xb0 kernel: [<00000001f86b1b62>] kmalloc_order_trace+0x32/0xe0 kernel: [<00000001f84bb806>] kvm_set_irq_routing+0xa6/0x2e0 kernel: [<00000001f84c99a4>] kvm_arch_vm_ioctl+0x544/0x9e0 kernel: [<00000001f84b8936>] kvm_vm_ioctl+0x396/0x760 kernel: [<00000001f875df66>] do_vfs_ioctl+0x376/0x690 kernel: [<00000001f875e304>] ksys_ioctl+0x84/0xb0 kernel: [<00000001f875e39a>] __s390x_sys_ioctl+0x2a/0x40 kernel: [<00000001f8d55424>] system_call+0xd8/0x2c8 As far as I can tell s390x does not use the iopins as we bail our for anything other than KVM_IRQ_ROUTING_S390_ADAPTER and the chip/pin is only used for KVM_IRQ_ROUTING_IRQCHIP. So let us use a small number to reduce the memory footprint. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200617083620.5409-1-borntraeger@de.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-07-09s390/debug: avoid kernel warning on too large number of pagesChristian Borntraeger1-1/+2
[ Upstream commit 827c4913923e0b441ba07ba4cc41e01181102303 ] When specifying insanely large debug buffers a kernel warning is printed. The debug code does handle the error gracefully, though. Instead of duplicating the check let us silence the warning to avoid crashes when panic_on_warn is used. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30s390/vdso: fix vDSO clock_getres()Vincenzo Frascino4-6/+8
[ Upstream commit 478237a595120a18e9b52fd2c57a6e8b7a01e411 ] clock_getres in the vDSO library has to preserve the same behaviour of posix_get_hrtimer_res(). In particular, posix_get_hrtimer_res() does: sec = 0; ns = hrtimer_resolution; and hrtimer_resolution depends on the enablement of the high resolution timers that can happen either at compile or at run time. Fix the s390 vdso implementation of clock_getres keeping a copy of hrtimer_resolution in vdso data and using that directly. Link: https://lkml.kernel.org/r/20200324121027.21665-1-vincenzo.frascino@arm.com Signed-off-by: Vincenzo Frascino <vincenzo.frascino@arm.com> Acked-by: Martin Schwidefsky <schwidefsky@de.ibm.com> [heiko.carstens@de.ibm.com: use llgf for proper zero extension] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30s390/vdso: Use $(LD) instead of $(CC) to link vDSONathan Chancellor1-6/+4
[ Upstream commit 2b2a25845d534ac6d55086e35c033961fdd83a26 ] Currently, the VDSO is being linked through $(CC). This does not match how the rest of the kernel links objects, which is through the $(LD) variable. When clang is built in a default configuration, it first attempts to use the target triple's default linker, which is just ld. However, the user can override this through the CLANG_DEFAULT_LINKER cmake define so that clang uses another linker by default, such as LLVM's own linker, ld.lld. This can be useful to get more optimized links across various different projects. However, this is problematic for the s390 vDSO because ld.lld does not have any s390 emulatiom support: https://github.com/llvm/llvm-project/blob/llvmorg-10.0.1-rc1/lld/ELF/Driver.cpp#L132-L150 Thus, if a user is using a toolchain with ld.lld as the default, they will see an error, even if they have specified ld.bfd through the LD make variable: $ make -j"$(nproc)" -s ARCH=s390 CROSS_COMPILE=s390x-linux-gnu- LLVM=1 \ LD=s390x-linux-gnu-ld \ defconfig arch/s390/kernel/vdso64/ ld.lld: error: unknown emulation: elf64_s390 clang-11: error: linker command failed with exit code 1 (use -v to see invocation) Normally, '-fuse-ld=bfd' could be used to get around this; however, this can be fragile, depending on paths and variable naming. The cleaner solution for the kernel is to take advantage of the fact that $(LD) can be invoked directly, which bypasses the heuristics of $(CC) and respects the user's choice. Similar changes have been done for ARM, ARM64, and MIPS. Link: https://lkml.kernel.org/r/20200602192523.32758-1-natechancellor@gmail.com Link: https://github.com/ClangBuiltLinux/linux/issues/1041 Signed-off-by: Nathan Chancellor <natechancellor@gmail.com> Reviewed-by: Nick Desaulniers <ndesaulniers@google.com> [heiko.carstens@de.ibm.com: add --build-id flag] Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30s390/ptrace: fix setting syscall numberSven Schnelle1-1/+30
[ Upstream commit 873e5a763d604c32988c4a78913a8dab3862d2f9 ] When strace wants to update the syscall number, it sets GPR2 to the desired number and updates the GPR via PTRACE_SETREGSET. It doesn't update regs->int_code which would cause the old syscall executed on syscall restart. As we cannot change the ptrace ABI and don't have a field for the interruption code, check whether the tracee is in a syscall and the last instruction was svc. In that case assume that the tracer wants to update the syscall number and copy the GPR2 value to regs->int_code. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30s390/ptrace: pass invalid syscall numbers to tracingSven Schnelle2-5/+3
[ Upstream commit 00332c16b1604242a56289ff2b26e283dbad0812 ] tracing expects to see invalid syscalls, so pass it through. The syscall path in entry.S checks the syscall number before looking up the handler, so it is still safe. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30s390/ptrace: return -ENOSYS when invalid syscall is suppliedSven Schnelle1-6/+13
[ Upstream commit cd29fa798001075a554b978df3a64e6656c25794 ] The current code returns the syscall number which an invalid syscall number is supplied and tracing is enabled. This makes the strace testsuite fail. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-30s390/seccomp: pass syscall arguments via seccomp_dataSven Schnelle1-5/+26
[ Upstream commit 664f5f8de825648d1d31f6f5652e3cd117c77b50 ] Use __secure_computing() and pass the register data via seccomp_data so secure computing doesn't have to fetch it again. Signed-off-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-24s390: fix syscall_get_error for compat processesDmitry V. Levin1-1/+11
commit b3583fca5fb654af2cfc1c08259abb9728272538 upstream. If both the tracer and the tracee are compat processes, and gprs[2] is assigned a value by __poke_user_compat, then the higher 32 bits of gprs[2] are cleared, IS_ERR_VALUE() always returns false, and syscall_get_error() always returns 0. Fix the implementation by sign-extending the value for compat processes the same way as x86 implementation does. The bug was exposed to user space by commit 201766a20e30f ("ptrace: add PTRACE_GET_SYSCALL_INFO request") and detected by strace test suite. This change fixes strace syscall tampering on s390. Link: https://lkml.kernel.org/r/20200602180051.GA2427@altlinux.org Fixes: 753c4dd6a2fa2 ("[S390] ptrace changes") Cc: Elvira Khabirova <lineprinter@altlinux.org> Cc: stable@vger.kernel.org # v2.6.28+ Signed-off-by: Dmitry V. Levin <ldv@altlinux.org> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2020-06-24s390/numa: let NODES_SHIFT depend on NEED_MULTIPLE_NODESHeiko Carstens1-0/+1
[ Upstream commit 64438e1bc0cdbe6d30bcdcb976f935eb3c297adc ] Qian Cai reported: """ When NUMA=n and nr_node_ids=2, in apply_wqattrs_prepare(), it has, for_each_node(node) { if (wq_calc_node_cpumask(... where it will trigger a booting warning, WARNING: workqueue cpumask: online intersect > possible intersect because it found 2 nodes and wq_numa_possible_cpumask[1] is an empty cpumask. """ Let NODES_SHIFT depend on NEED_MULTIPLE_NODES like it is done on other architectures in order to fix this. Fixes: 701dc81e7412 ("s390/mm: remove fake numa support") Reported-by: Qian Cai <cai@lca.pw> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-22s390/bpf: Maintain 8-byte stack alignmentIlya Leoshkevich1-9/+10
[ Upstream commit effe5be17706167ee968fa28afe40dec9c6f71db ] Certain kernel functions (e.g. get_vtimer/set_vtimer) cause kernel panic when the stack is not 8-byte aligned. Currently JITed BPF programs may trigger this by allocating stack frames with non-rounded sizes and then being interrupted. Fix by using rounded fp->aux->stack_depth. Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Signed-off-by: Daniel Borkmann <daniel@iogearbox.net> Link: https://lore.kernel.org/bpf/20200602174339.2501066-1-iii@linux.ibm.com Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-06-17s390/pci: Log new handle in clp_disable_fh()Petr Tesarik1-2/+1
[ Upstream commit e1750a3d9abbea2ece29cac8dc5a6f5bc19c1492 ] After disabling a function, the original handle is logged instead of the disabled handle. Link: https://lkml.kernel.org/r/20200522183922.5253-1-ptesarik@suse.com Fixes: 17cdec960cf7 ("s390/pci: Recover handle in clp_set_pci_fn()") Reviewed-by: Pierre Morel <pmorel@linux.ibm.com> Signed-off-by: Petr Tesarik <ptesarik@suse.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>
2020-05-20s390/kaslr: add support for R_390_JMP_SLOT relocation typeGerald Schaefer1-0/+1
With certain kernel configurations, the R_390_JMP_SLOT relocation type might be generated, which is not expected by the KASLR relocation code, and the kernel stops with the message "Unknown relocation type". This was found with a zfcpdump kernel config, where CONFIG_MODULES=n and CONFIG_VFIO=n. In that case, symbol_get() is used on undefined __weak symbols in virt/kvm/vfio.c, which results in the generation of R_390_JMP_SLOT relocation types. Fix this by handling R_390_JMP_SLOT similar to R_390_GLOB_DAT. Fixes: 805bc0bc238f ("s390/kernel: build a relocatable kernel") Cc: <stable@vger.kernel.org> # v5.2+ Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Reviewed-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-20s390/mm: fix set_huge_pte_at() for empty ptesGerald Schaefer1-3/+6
On s390, the layout of normal and large ptes (i.e. pmds/puds) differs. Therefore, set_huge_pte_at() does a conversion from a normal pte to the corresponding large pmd/pud. So, when converting an empty pte, this should result in an empty pmd/pud, which would return true for pmd/pud_none(). However, after conversion we also mark the pmd/pud as large, and therefore present. For empty ptes, this will result in an empty pmd/pud that is also marked as large, and pmd/pud_none() would not return true. There is currently no issue with this behaviour, as set_huge_pte_at() does not seem to be called for empty ptes. It would be valid though, so let's fix this by not marking empty ptes as large in set_huge_pte_at(). This was found by testing a patch from from Anshuman Khandual, which is currently discussed on LKML ("mm/debug: Add more arch page table helper tests"). Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-15s390/kexec_file: fix initrd location for kdump kernelPhilipp Rudo1-1/+1
initrd_start must not point at the location the initrd is loaded into the crashkernel memory but at the location it will be after the crashkernel memory is swapped with the memory at 0. Fixes: ee337f5469fd ("s390/kexec_file: Add crash support to image loader") Reported-by: Lianbo Jiang <lijiang@redhat.com> Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Tested-by: Lianbo Jiang <lijiang@redhat.com> Link: https://lore.kernel.org/r/20200512193956.15ae3f23@laptop2-ibm.local Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-15s390/pci: Fix s390_mmio_read/write with MIONiklas Schnelle2-4/+219
The s390_mmio_read/write syscalls are currently broken when running with MIO. The new pcistb_mio/pcstg_mio/pcilg_mio instructions are executed similiarly to normal load/store instructions and do address translation in the current address space. That means inside the kernel they are aware of mappings into kernel address space while outside the kernel they use user space mappings (usually created through mmap'ing a PCI device file). Now when existing user space applications use the s390_pci_mmio_write and s390_pci_mmio_read syscalls, they pass I/O addresses that are mapped into user space so as to be usable with the new instructions without needing a syscall. Accessing these addresses with the old instructions as done currently leads to a kernel panic. Also, for such a user space mapping there may not exist an equivalent kernel space mapping which means we can't just use the new instructions in kernel space. Instead of replicating user mappings in the kernel which then might collide with other mappings, we can conceptually execute the new instructions as if executed by the user space application using the secondary address space. This even allows us to directly store to the user pointer without the need for copy_to/from_user(). Cc: stable@vger.kernel.org Fixes: 71ba41c9b1d9 ("s390/pci: provide support for MIO instructions") Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Reviewed-by: Sven Schnelle <svens@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-05-07Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-1/+4
Pull kvm fixes from Paolo Bonzini: "Bugfixes, mostly for ARM and AMD, and more documentation. Slightly bigger than usual because I couldn't send out what was pending for rc4, but there is nothing worrisome going on. I have more fixes pending for guest debugging support (gdbstub) but I will send them next week" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (22 commits) KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properly KVM: selftests: Fix build for evmcs.h kvm: x86: Use KVM CPU capabilities to determine CR4 reserved bits KVM: VMX: Explicitly clear RFLAGS.CF and RFLAGS.ZF in VM-Exit RSB path docs/virt/kvm: Document configuring and running nested guests KVM: s390: Remove false WARN_ON_ONCE for the PQAP instruction kvm: ioapic: Restrict lazy EOI update to edge-triggered interrupts KVM: x86: Fixes posted interrupt check for IRQs delivery modes KVM: SVM: fill in kvm_run->debug.arch.dr[67] KVM: nVMX: Replace a BUG_ON(1) with BUG() to squash clang warning KVM: arm64: Fix 32bit PC wrap-around KVM: arm64: vgic-v4: Initialize GICv4.1 even in the absence of a virtual ITS KVM: arm64: Save/restore sp_el0 as part of __guest_enter KVM: arm64: Delete duplicated label in invalid_vector KVM: arm64: vgic-its: Fix memory leak on the error path of vgic_add_lpi() KVM: arm64: vgic-v3: Retire all pending LPIs on vcpu destroy KVM: arm: vgic-v2: Only use the virtual state when userspace accesses pending bits KVM: arm: vgic: Only use the virtual state when userspace accesses enable bits KVM: arm: vgic: Synchronize the whole guest on GIC{D,R}_I{S,C}ACTIVER read KVM: arm64: PSCI: Forbid 64bit functions for 32bit guests ...
2020-05-06Merge tag 'kvm-s390-master-5.7-3' of ↵Paolo Bonzini1-1/+3
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into HEAD KVM: s390: Fix for running nested uner z/VM There are circumstances when running nested under z/VM that would trigger a WARN_ON_ONCE. Remove the WARN_ON_ONCE. Long term we certainly want to make this code more robust and flexible, but just returning instead of WARNING makes guest bootable again.
2020-05-06KVM: X86: Declare KVM_CAP_SET_GUEST_DEBUG properlyPeter Xu1-0/+1
KVM_CAP_SET_GUEST_DEBUG should be supported for x86 however it's not declared as supported. My wild guess is that userspaces like QEMU are using "#ifdef KVM_CAP_SET_GUEST_DEBUG" to check for the capability instead, but that could be wrong because the compilation host may not be the runtime host. The userspace might still want to keep the old "#ifdef" though to not break the guest debug on old kernels. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20200505154750.126300-1-peterx@redhat.com> [Do the same for PPC and s390. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-05-05KVM: s390: Remove false WARN_ON_ONCE for the PQAP instructionChristian Borntraeger1-1/+3
In LPAR we will only get an intercept for FC==3 for the PQAP instruction. Running nested under z/VM can result in other intercepts as well as ECA_APIE is an effective bit: If one hypervisor layer has turned this bit off, the end result will be that we will get intercepts for all function codes. Usually the first one will be a query like PQAP(QCI). So the WARN_ON_ONCE is not right. Let us simply remove it. Cc: Pierre Morel <pmorel@linux.ibm.com> Cc: Tony Krowiak <akrowiak@linux.ibm.com> Cc: stable@vger.kernel.org # v5.3+ Fixes: e5282de93105 ("s390: ap: kvm: add PQAP interception for AQIC") Link: https://lore.kernel.org/kvm/20200505083515.2720-1-borntraeger@de.ibm.com Reported-by: Qian Cai <cailca@icloud.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-04-28Merge tag 'cve-2020-11884' from emailed bundleLinus Torvalds2-2/+18
Pull s390 fix from Christian Borntraeger: "Fix a race between page table upgrade and uaccess on s390. This fixes CVE-2020-11884 which allows for a local kernel crash or code execution" * tag 'cve-2020-11884' from emailed bundle: s390/mm: fix page table upgrade vs 2ndary address mode accesses
2020-04-26Merge tag 's390-5.7-3' of ↵Linus Torvalds6-9/+9
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull s390 fixes from Vasily Gorbik: - Add a few notrace annotations to avoid potential crashes when switching ftrace tracers. - Avoid setting affinity for floating irqs in pci code. - Fix build issue found by kbuild test robot. * tag 's390-5.7-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/protvirt: fix compilation issue s390/pci: do not set affinity for floating irqs s390/ftrace: fix potential crashes when switching tracers
2020-04-25s390/protvirt: fix compilation issueClaudio Imbrenda2-3/+2
The kernel fails to compile with CONFIG_PROTECTED_VIRTUALIZATION_GUEST set but CONFIG_KVM unset. This patch fixes the issue by making the needed variable always available. Link: https://lkml.kernel.org/r/20200423120114.2027410-1-imbrenda@linux.ibm.com Fixes: a0f60f843199 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information") Reported-by: kbuild test robot <lkp@intel.com> Reported-by: Philipp Rudo <prudo@linux.ibm.com> Suggested-by: Philipp Rudo <prudo@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Reviewed-by: Vasily Gorbik <gor@linux.ibm.com> Acked-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-22s390/pci: do not set affinity for floating irqsNiklas Schnelle1-2/+3
with the introduction of CPU directed interrupts the kernel parameter pci=force_floating was introduced to fall back to the previous behavior using floating irqs. However we were still setting the affinity in that case, both in __irq_alloc_descs() and via the irq_set_affinity callback in struct irq_chip. For the former only set the affinity in the directed case. The latter is explicitly set in zpci_directed_irq_init() so we can just leave it unset for the floating case. Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts") Co-developed-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Alexander Schmidt <alexs@linux.ibm.com> Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-22s390/ftrace: fix potential crashes when switching tracersPhilipp Rudo3-4/+4
Switching tracers include instruction patching. To prevent that a instruction is patched while it's read the instruction patching is done in stop_machine 'context'. This also means that any function called during stop_machine must not be traced. Thus add 'notrace' to all functions called within stop_machine. Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls") Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine") Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield") Signed-off-by: Philipp Rudo <prudo@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-21Merge tag 'kvm-s390-master-5.7-2' of ↵Paolo Bonzini62-2197/+574
git://git.kernel.org/pub/scm/linux/kernel/git/kvms390/linux into kvm-master KVM: s390: Fix for 5.7 and maintainer update - Silence false positive lockdep warning - add Claudio as reviewer
2020-04-21s390/mm: fix page table upgrade vs 2ndary address mode accessesChristian Borntraeger2-2/+18
A page table upgrade in a kernel section that uses secondary address mode will mess up the kernel instructions as follows: Consider the following scenario: two threads are sharing memory. On CPU1 thread 1 does e.g. strnlen_user(). That gets to old_fs = enable_sacf_uaccess(); len = strnlen_user_srst(src, size); and " la %2,0(%1)\n" " la %3,0(%0,%1)\n" " slgr %0,%0\n" " sacf 256\n" "0: srst %3,%2\n" in strnlen_user_srst(). At that point we are in secondary space mode, control register 1 points to kernel page table and instruction fetching happens via c1, rather than usual c13. Interrupts are not disabled, for obvious reasons. On CPU2 thread 2 does MAP_FIXED mmap(), forcing the upgrade of page table from 3-level to e.g. 4-level one. We'd allocated new top-level table, set it up and now we hit this: notify = 1; spin_unlock_bh(&mm->page_table_lock); } if (notify) on_each_cpu(__crst_table_upgrade, mm, 0); OK, we need to actually change over to use of new page table and we need that to happen in all threads that are currently running. Which happens to include the thread 1. IPI is delivered and we have static void __crst_table_upgrade(void *arg) { struct mm_struct *mm = arg; if (current->active_mm == mm) set_user_asce(mm); __tlb_flush_local(); } run on CPU1. That does static inline void set_user_asce(struct mm_struct *mm) { S390_lowcore.user_asce = mm->context.asce; OK, user page table address updated... __ctl_load(S390_lowcore.user_asce, 1, 1); ... and control register 1 set to it. clear_cpu_flag(CIF_ASCE_PRIMARY); } IPI is run in home space mode, so it's fine - insns are fetched using c13, which always points to kernel page table. But as soon as we return from the interrupt, previous PSW is restored, putting CPU1 back into secondary space mode, at which point we no longer get the kernel instructions from the kernel mapping. The fix is to only fixup the control registers that are currently in use for user processes during the page table update. We must also disable interrupts in enable_sacf_uaccess to synchronize the cr and thread.mm_segment updates against the on_each-cpu. Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode") Cc: stable@vger.kernel.org # 4.15+ Reported-by: Al Viro <viro@zeniv.linux.org.uk> Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> References: CVE-2020-11884 Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-04-20KVM: s390: Fix PV check in deliverable_irqs()Eric Farman1-1/+1
The diag 0x44 handler, which handles a directed yield, goes into a a codepath that does a kvm_for_each_vcpu() and ultimately deliverable_irqs(). The new check for kvm_s390_pv_cpu_is_protected() contains an assertion that the vcpu->mutex is held, which isn't going to be the case in this scenario. The result is a plethora of these messages if the lock debugging is enabled, and thus an implication that we have a problem. WARNING: CPU: 9 PID: 16167 at arch/s390/kvm/kvm-s390.h:239 deliverable_irqs+0x1c6/0x1d0 [kvm] ...snip... Call Trace: [<000003ff80429bf2>] deliverable_irqs+0x1ca/0x1d0 [kvm] ([<000003ff80429b34>] deliverable_irqs+0x10c/0x1d0 [kvm]) [<000003ff8042ba82>] kvm_s390_vcpu_has_irq+0x2a/0xa8 [kvm] [<000003ff804101e2>] kvm_arch_dy_runnable+0x22/0x38 [kvm] [<000003ff80410284>] kvm_vcpu_on_spin+0x8c/0x1d0 [kvm] [<000003ff80436888>] kvm_s390_handle_diag+0x3b0/0x768 [kvm] [<000003ff80425af4>] kvm_handle_sie_intercept+0x1cc/0xcd0 [kvm] [<000003ff80422bb0>] __vcpu_run+0x7b8/0xfd0 [kvm] [<000003ff80423de6>] kvm_arch_vcpu_ioctl_run+0xee/0x3e0 [kvm] [<000003ff8040ccd8>] kvm_vcpu_ioctl+0x2c8/0x8d0 [kvm] [<00000001504ced06>] ksys_ioctl+0xae/0xe8 [<00000001504cedaa>] __s390x_sys_ioctl+0x2a/0x38 [<0000000150cb9034>] system_call+0xd8/0x2d8 2 locks held by CPU 2/KVM/16167: #0: 00000001951980c0 (&vcpu->mutex){+.+.}, at: kvm_vcpu_ioctl+0x90/0x8d0 [kvm] #1: 000000019599c0f0 (&kvm->srcu){....}, at: __vcpu_run+0x4bc/0xfd0 [kvm] Last Breaking-Event-Address: [<000003ff80429b34>] deliverable_irqs+0x10c/0x1d0 [kvm] irq event stamp: 11967 hardirqs last enabled at (11975): [<00000001502992f2>] console_unlock+0x4ca/0x650 hardirqs last disabled at (11982): [<0000000150298ee8>] console_unlock+0xc0/0x650 softirqs last enabled at (7940): [<0000000150cba6ca>] __do_softirq+0x422/0x4d8 softirqs last disabled at (7929): [<00000001501cd688>] do_softirq_own_stack+0x70/0x80 Considering what's being done here, let's fix this by removing the mutex assertion rather than acquiring the mutex for every other vcpu. Fixes: 201ae986ead7 ("KVM: s390: protvirt: Implement interrupt injection") Signed-off-by: Eric Farman <farman@linux.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Link: https://lore.kernel.org/r/20200415190353.63625-1-farman@linux.ibm.com Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-04-14KVM: s390: Return last valid slot if approx index is out-of-boundsSean Christopherson1-0/+3
Return the index of the last valid slot from gfn_to_memslot_approx() if its binary search loop yielded an out-of-bounds index. The index can be out-of-bounds if the specified gfn is less than the base of the lowest memslot (which is also the last valid memslot). Note, the sole caller, kvm_s390_get_cmma(), ensures used_slots is non-zero. Fixes: afdad61615cc3 ("KVM: s390: Fix storage attributes migration with memory slots") Cc: stable@vger.kernel.org # 4.19.x: 0774a964ef56: KVM: Fix out of range accesses to memslots Cc: stable@vger.kernel.org # 4.19.x Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com> Message-Id: <20200408064059.8957-3-sean.j.christopherson@intel.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2020-04-11Merge branch 'akpm' (patches from Andrew)Linus Torvalds3-6/+8
Merge yet more updates from Andrew Morton: - Almost all of the rest of MM (memcg, slab-generic, slab, pagealloc, gup, hugetlb, pagemap, memremap) - Various other things (hfs, ocfs2, kmod, misc, seqfile) * akpm: (34 commits) ipc/util.c: sysvipc_find_ipc() should increase position index kernel/gcov/fs.c: gcov_seq_next() should increase position index fs/seq_file.c: seq_read(): add info message about buggy .next functions drivers/dma/tegra20-apb-dma.c: fix platform_get_irq.cocci warnings change email address for Pali Rohár selftests: kmod: test disabling module autoloading selftests: kmod: fix handling test numbers above 9 docs: admin-guide: document the kernel.modprobe sysctl fs/filesystems.c: downgrade user-reachable WARN_ONCE() to pr_warn_once() kmod: make request_module() return an error when autoloading is disabled mm/memremap: set caching mode for PCI P2PDMA memory to WC mm/memory_hotplug: add pgprot_t to mhp_params powerpc/mm: thread pgprot_t through create_section_mapping() x86/mm: introduce __set_memory_prot() x86/mm: thread pgprot_t through init_memory_mapping() mm/memory_hotplug: rename mhp_restrictions to mhp_params mm/memory_hotplug: drop the flags field from struct mhp_restrictions mm/special: create generic fallbacks for pte_special() and pte_mkspecial() mm/vma: introduce VM_ACCESS_FLAGS mm/vma: define a default value for VM_DATA_DEFAULT_FLAGS ...
2020-04-11mm/memory_hotplug: add pgprot_t to mhp_paramsLogan Gunthorpe1-0/+3
devm_memremap_pages() is currently used by the PCI P2PDMA code to create struct page mappings for IO memory. At present, these mappings are created with PAGE_KERNEL which implies setting the PAT bits to be WB. However, on x86, an mtrr register will typically override this and force the cache type to be UC-. In the case firmware doesn't set this register it is effectively WB and will typically result in a machine check exception when it's accessed. Other arches are not currently likely to function correctly seeing they don't have any MTRR registers to fall back on. To solve this, provide a way to specify the pgprot value explicitly to arch_add_memory(). Of the arches that support MEMORY_HOTPLUG: x86_64, and arm64 need a simple change to pass the pgprot_t down to their respective functions which set up the page tables. For x86_32, set the page tables explicitly using _set_memory_prot() (seeing they are already mapped). For ia64, s390 and sh, reject anything but PAGE_KERNEL settings -- this should be fine, for now, seeing these architectures don't support ZONE_DEVICE. A check in __add_pages() is also added to ensure the pgprot parameter was set for all arches. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: David Hildenbrand <david@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Acked-by: Dan Williams <dan.j.williams@intel.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Badger <ebadger@gigaio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200306170846.9333-7-logang@deltatee.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-11mm/memory_hotplug: rename mhp_restrictions to mhp_paramsLogan Gunthorpe1-3/+3
The mhp_restrictions struct really doesn't specify anything resembling a restriction anymore so rename it to be mhp_params as it is a list of extended parameters. Signed-off-by: Logan Gunthorpe <logang@deltatee.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Dan Williams <dan.j.williams@intel.com> Acked-by: Michal Hocko <mhocko@suse.com> Cc: Andy Lutomirski <luto@kernel.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Borislav Petkov <bp@alien8.de> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Christoph Hellwig <hch@lst.de> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Eric Badger <ebadger@gigaio.com> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jason Gunthorpe <jgg@ziepe.ca> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Will Deacon <will@kernel.org> Link: http://lkml.kernel.org/r/20200306170846.9333-3-logang@deltatee.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-11mm/vma: introduce VM_ACCESS_FLAGSAnshuman Khandual1-1/+1
There are many places where all basic VMA access flags (read, write, exec) are initialized or checked against as a group. One such example is during page fault. Existing vma_is_accessible() wrapper already creates the notion of VMA accessibility as a group access permissions. Hence lets just create VM_ACCESS_FLAGS (VM_READ|VM_WRITE|VM_EXEC) which will not only reduce code duplication but also extend the VMA accessibility concept in general. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Nick Hu <nickhu@andestech.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Rob Springer <rspringer@google.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Link: http://lkml.kernel.org/r/1583391014-8170-3-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-11mm/vma: define a default value for VM_DATA_DEFAULT_FLAGSAnshuman Khandual1-2/+1
There are many platforms with exact same value for VM_DATA_DEFAULT_FLAGS This creates a default value for VM_DATA_DEFAULT_FLAGS in line with the existing VM_STACK_DEFAULT_FLAGS. While here, also define some more macros with standard VMA access flag combinations that are used frequently across many platforms. Apart from simplification, this reduces code duplication as well. Signed-off-by: Anshuman Khandual <anshuman.khandual@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Acked-by: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Richard Henderson <rth@twiddle.net> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Mark Salter <msalter@redhat.com> Cc: Guo Ren <guoren@kernel.org> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Brian Cain <bcain@codeaurora.org> Cc: Tony Luck <tony.luck@intel.com> Cc: Michal Simek <monstr@monstr.eu> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Burton <paulburton@kernel.org> Cc: Nick Hu <nickhu@andestech.com> Cc: Ley Foon Tan <ley.foon.tan@intel.com> Cc: Jonas Bonn <jonas@southpole.se> Cc: "James E.J. Bottomley" <James.Bottomley@HansenPartnership.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Paul Walmsley <paul.walmsley@sifive.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Rich Felker <dalias@libc.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Guan Xuetao <gxt@pku.edu.cn> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jeff Dike <jdike@addtoit.com> Cc: Chris Zankel <chris@zankel.net> Link: http://lkml.kernel.org/r/1583391014-8170-2-git-send-email-anshuman.khandual@arm.com Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2020-04-10Merge tag 's390-5.7-2' of ↵Linus Torvalds2-10/+8
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux Pull more s390 updates from Vasily Gorbik: "Second round of s390 fixes and features for 5.7: - The rest of fallthrough; annotations conversion - Couple of fixes for ADD uevents in the common I/O layer - Minor refactoring of the queued direct I/O code" * tag 's390-5.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: s390/cio: generate delayed uevent for vfio-ccw subchannels s390/cio: avoid duplicated 'ADD' uevents s390/qdio: clear DSCI early for polling drivers s390/qdio: inline shared_ind() s390/qdio: remove cdev from init_data s390/qdio: allow for non-contiguous SBAL array in init_data zfcp: inline zfcp_qdio_setup_init_data() s390/qdio: cleanly split alloc and establish s390/mm: use fallthrough;
2020-04-08Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvmLinus Torvalds2-1/+7
Pull more kvm updates from Paolo Bonzini: "s390: - nested virtualization fixes x86: - split svm.c - miscellaneous fixes" * tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: KVM: VMX: fix crash cleanup when KVM wasn't used KVM: X86: Filter out the broadcast dest for IPI fastpath KVM: s390: vsie: Fix possible race when shadowing region 3 tables KVM: s390: vsie: Fix delivery of addressing exceptions KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checks KVM: nVMX: don't clear mtf_pending when nested events are blocked KVM: VMX: Remove unnecessary exception trampoline in vmx_vmenter KVM: SVM: Split svm_vcpu_run inline assembly to separate file KVM: SVM: Move SEV code to separate file KVM: SVM: Move AVIC code to separate file KVM: SVM: Move Nested SVM Implementation to nested.c kVM SVM: Move SVM related files to own sub-directory
2020-04-08Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhostLinus Torvalds1-4/+0
Pull virtio updates from Michael Tsirkin: - Some bug fixes - The new vdpa subsystem with two first drivers * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: virtio-balloon: Revert "virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM" vdpa: move to drivers/vdpa virtio: Intel IFC VF driver for VDPA vdpasim: vDPA device simulator vhost: introduce vDPA-based backend virtio: introduce a vDPA based transport vDPA: introduce vDPA bus vringh: IOTLB support vhost: factor out IOTLB vhost: allow per device message handler vhost: refine vhost and vringh kconfig virtio-balloon: Switch back to OOM handler for VIRTIO_BALLOON_F_DEFLATE_ON_OOM virtio-net: Introduce hash report feature virtio-net: Introduce RSS receive steering feature virtio-net: Introduce extended RSC feature tools/virtio: option to build an out of tree module
2020-04-07KVM: s390: vsie: Fix possible race when shadowing region 3 tablesDavid Hildenbrand1-0/+1
We have to properly retry again by returning -EINVAL immediately in case somebody else instantiated the table concurrently. We missed to add the goto in this function only. The code now matches the other, similar shadowing functions. We are overwriting an existing region 2 table entry. All allocated pages are added to the crst_list to be freed later, so they are not lost forever. However, when unshadowing the region 2 table, we wouldn't trigger unshadowing of the original shadowed region 3 table that we replaced. It would get unshadowed when the original region 3 table is modified. As it's not connected to the page table hierarchy anymore, it's not going to get used anymore. However, for a limited time, this page table will stick around, so it's in some sense a temporary memory leak. Identified by manual code inspection. I don't think this classifies as stable material. Fixes: 998f637cc4b9 ("s390/mm: avoid races on region/segment/page table shadowing") Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-4-david@redhat.com Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-04-07KVM: s390: vsie: Fix delivery of addressing exceptionsDavid Hildenbrand1-0/+1
Whenever we get an -EFAULT, we failed to read in guest 2 physical address space. Such addressing exceptions are reported via a program intercept to the nested hypervisor. We faked the intercept, we have to return to guest 2. Instead, right now we would be returning -EFAULT from the intercept handler, eventually crashing the VM. the correct thing to do is to return 1 as rc == 1 is the internal representation of "we have to go back into g2". Addressing exceptions can only happen if the g2->g3 page tables reference invalid g2 addresses (say, either a table or the final page is not accessible - so something that basically never happens in sane environments. Identified by manual code inspection. Fixes: a3508fbe9dc6 ("KVM: s390: vsie: initial support for nested virtualization") Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-3-david@redhat.com Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [borntraeger@de.ibm.com: fix patch description] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-04-07KVM: s390: vsie: Fix region 1 ASCE sanity shadow address checksDavid Hildenbrand1-1/+5
In case we have a region 1 the following calculation (31 + ((gmap->asce & _ASCE_TYPE_MASK) >> 2)*11) results in 64. As shifts beyond the size are undefined the compiler is free to use instructions like sllg. sllg will only use 6 bits of the shift value (here 64) resulting in no shift at all. That means that ALL addresses will be rejected. The can result in endless loops, e.g. when prefix cannot get mapped. Fixes: 4be130a08420 ("s390/mm: add shadow gmap support") Tested-by: Janosch Frank <frankja@linux.ibm.com> Reported-by: Janosch Frank <frankja@linux.ibm.com> Cc: <stable@vger.kernel.org> # v4.8+ Signed-off-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20200403153050.20569-2-david@redhat.com Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com> [borntraeger@de.ibm.com: fix patch description, remove WARN_ON_ONCE] Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2020-04-06s390/qdio: remove cdev from init_dataJulian Wiedmann1-3/+2
It's no longer needed. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-06s390/qdio: allow for non-contiguous SBAL array in init_dataJulian Wiedmann1-4/+4
Upper-layer drivers allocate their SBALs by calling qdio_alloc_buffers() for each individual queue. But when later passing the SBAL addresses to qdio_establish(), they need to be in a single array of pointers. So if the driver uses multiple Input or Output queues, it needs to allocate a temporary array just to present all its SBAL pointers in this layout. This patch slightly changes the format of the QDIO initialization data, so that drivers can pass a per-queue array where each element points to a queue's SBAL array. zfcp doesn't use multiple queues, so the impact there is trivial. For qeth this brings a nice reduction in complexity, and removes a page-sized allocation. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-06s390/qdio: cleanly split alloc and establishJulian Wiedmann1-1/+2
All that qdio_allocate() actually uses from the init_data is the cdev, and the number of Input and Output Queues. Have the driver pass those as parameters, and defer the init_data processing into qdio_establish(). This includes writing per-device(!) trace entries, and most of the sanity checks. Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com> Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
2020-04-06s390/mm: use fallthrough;Joe Perches1-2/+0
Convert the various uses of fallthrough comments to fallthrough; Done via script Link: https://lore.kernel.org/lkml/b56602fcf79f849e733e7b521bb0e17895d390fa.1582230379.git.joe.com/ Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
generated by cgit v1.2.3 (git 2.39.0) at 2025-09-29 05:58:29 +0300